I changed the preferred branch for the Eclipse example from
a hard-coded "1.3_beta" to use the DISTRO_NAME variable.
(From yocto-docs rev: 9393c5d1e44a1e326c73353b090c1d1c1a5833da)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added information in the #4 box to include the cross-dev
toolchain.
(From yocto-docs rev: 198ab4326369d8c74225d9de51bf536621ab2251)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the item that talks about getting the root filesystem.
Realized that the cross-toolchain was not discussed in this
bullet for the case where a user does not use the ADT
Installer. Added text and references to correct that.
(From yocto-docs rev: ec2f5103471f047f7ed7e53cc22789c74ab506ae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added an earlier occurence of the "tm" for Eclipse product.
Also, changed the reference for modifying the kernel to point
into the appendex rather than self-referencing the same section
from where the reference originated.
(From yocto-docs rev: a85840611650c9124b6194acca59c8bfe71f566c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I standardized the use of the term "Source Directory" when
referring to the poky directory as set up on the host.
(From yocto-docs rev: 3eaf7a734a4eecab2be2c8e71bee4d6c2cb7788b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made this more accurate by including notes to edit the
source and use of menuconfig within the diagram.
(From yocto-docs rev: 91d3d2e935aab24c4bd96c5921a605cbbb7e3231)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed to add the 3.4 kernel to the list of linux-yocto-*
kernels as found in the source repository.
(From yocto-docs rev: 98538e2616214f76083697ad3cc886efd183c34e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bulleted item that describes where to look for application
development was still pointing exclusively to the adt-manual.
Updated to point to adt-manual for host setup only and then
point to section in the dev-manual for the Eclipse example.
(From yocto-docs rev: 36ac631e23366c4d9f83c2d00cbbd3bc4758aa15)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Better display of the SELECTED_OPTIMIZATION variable options
when they appear as a list.
Also, some punctuation added.
(From yocto-docs rev: 73777e545f13eacca9ee466ba852bccd84c17f6f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
'sdk', when used in general terms should be capitialized.
(From yocto-docs rev: 1d68746ae197620b533a9ad53e71b16c9e4e42b8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I found other changes for underlying/corresponding wordings
regarding the relationship between .bb and .bbappend filenames.
(From yocto-docs rev: 28f12a4ea97a683281cd8cc0bbceb40d2b896aa4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Better choice of word here is "corresponding" rather than
"underlying".
(From yocto-docs rev: 3d8b6d6e06b81960df2a7d25b6d54308210cc011)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The manual listed an out-dated example listing of meta-* layers
in poky.
(From yocto-docs rev: 39e2a02301d1d0b609fbc041395dd31f6ba9fa2d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The description for where the "scripts" directory lives was not
conforming to our terminology.
(From yocto-docs rev: 925167c446b86ca09d387d01568db64113412311)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For obvious reasons I changed this one :)
(From yocto-docs rev: 5f3203292f46bea799321e4520668252a46fb599)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I improved the wording such that it is not tied to a
x.x type release. It is more generic here and will survive
better under future releases.
(From yocto-docs rev: 2bd644db7fef71cd2f07f6d3dcbd2ba60b83df08)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a line to cd to the poky directory so the example makes
sure the meta-intel directory is created in poky as it states.
(From yocto-docs rev: fdeff0fc2c61c521eaf9d3c48429792f1559c2a4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated so that the repo poky-extras is for sure created inside
the poky repository.
(From yocto-docs rev: b01ea76ded2ade66f2cb19b37d9e9d8d5d2e96c9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
changed the example of what the manual does not provide to
be more appropriate.
(From yocto-docs rev: c4e7712cfd2e13b42f7322ffed6a1f84116df963)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Section A.5.2.3 "Changing recipes-kernel" indicated that the user
needed to look in poky/meta-yocto/recipes-kernel/linux to find
the linux-yocto_3.2.bbappend file to locate correct SRCREV
values. With 3.1, the team split out kernel and BSP stuff
even further by creating a poky/meta-yocto-bsp directory.
The example needs to reference that directory instead.
(From yocto-docs rev: 6e9b0ceb5ad24b1be8399bf5a0a83fdc30129f82)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the section "Using an External SCM." This section was
written so that PN was refering to a package instead of correctly
refering to the recipe.
(From yocto-docs rev: 2bf44cf78bef08d2dd4d9e596100900913777d60)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For 1.3 there is not longer a toolchain tarball. Instead, there
is a wrapper script that lets you install the tarball. This
fundamental usage model change caused several ripples throughout
the documentation set. I have changed wordings and examples
to reflect the new paradigm.
(From yocto-docs rev: afb2069daa91e04c0f78ba425a6b184cb820d888)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The steps for creating a project in Eclipse vary a bit between Juno
and Indigo. These changes reflect that.
(From yocto-docs rev: a020ecde8ed02a29f67498ef1511261d2054f784)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits to test out the lastes version of installing the Yocto Eclipse
plug-in from the latest source. Small changes to be more complete
on the step-by-step process with regard to being in the right
branch. Also, inserted 1.3_beta as the version. This will change
later.
(From yocto-docs rev: 1326916a7d03bdbb0613e6e26a4089b3bd87d204)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I fixed the repo example so that the -b option is right after the
git checkout command and so that the "origin/" string is part of the
example.
(From yocto-docs rev: ba7ed26cf308a69e1ec8cfb0072dd10742af4ac5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Task has been renamed to package group, and there are some minor changes
in how package group recipes should be constructed - in particular the
inherit of packagegroup.bbclass is now highly recommended as it will set
appropriate defaults and automatically add complementary -dev and -dbg
packages.
In addition to Paul's patch, I added a couple <filename>/</filename>
tags around some switch names to be consistent with manual
formatting.
(From yocto-docs rev: 598d18507ace2054f8c8bb5f496557c98f066b5a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The meta-intel BSPs and yocto-bsp tool no longer use a bbappend of
task-core-tools-profile to add systemtap, so these sections should be
removed.
(From yocto-docs rev: cdc12163dd95f0a78cc0f35c03b5eb3d7b1476e3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert P. J. Day pointed out a link in the development manual that
was for the BitBake User Manual. The link resolved to an old,
non-maintained version of BitBake documentation. According to
Richard Purdie, the BitBake docs referenced should be the ones
that ship in the bitbake/doc/manual directory of poky. The
YP docs had been using a variable named BITBAKE_DOCS_URL that
also resolved to the antiquated user manual site. Consequently,
there were many links that needed fixed across both the YP
Development Manual and the YP Reference Manual. Each of these
references now points in general to the bitbake/doc/manual
directory in poky for more information.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 12f77236b602e9ec43e845c8cec060ad342af19c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a note in the "Creating Layers" section noting that to be
Yocto Project compliant, a layer must contain a README file. This
change was prompted by a discussion over the fact between Robert
P. J. Day and Mark Hatle.
(From yocto-docs rev: 2e073763a81125699a2d962031ca29ca64c81595)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the section that describes how to submit a patch through
email while not using the scripts that send patches and request
pulls.
(From yocto-docs rev: 9167b89289134d8d16610cc527d0d71713c0641b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the title and a single reference from the Kernel manual
to a title more representative of how these patches are sent -
not using scripts.
(From yocto-docs rev: ff908c34fae88eab9724891a008142a834f34081)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added text to indicate that using the two scripts for generating
patches and requesting pulls is the preferred method to send
a patch.
(From yocto-docs rev: d6f036a91074dd00c51fe0f937224182fc801b3b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the section heading for the part describing how to
push changes upstream via the poky scripts. Also had to
change one cross-reference to the section in the kernel
manual.
(From yocto-docs rev: be7712aba044238e8781cdf869c5d14e77eb09a2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Every place in the YP documentation suggests setting BB_NUMBER_THREADS
and PARALLEL_MAKE to twice the number of cores as the host machine.
This fixes a single instance in the YP dev manual where it was
suggested that PARELLEL_MAKE be set at 1.5x times the number of
cores.
(From yocto-docs rev: b6b820371cbe43e39425156c72c45df283fdf7d1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed "The" from all the titles of the books. This makes it easier
to reference to them and easier for the automated processing of the
mega-manual.
(From yocto-docs rev: af566d6d007cff642648698ea487a6eeaa8cc930)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I fixed a reference to a manual that should have had "Guide" and
not "Manual"
(From yocto-docs rev: a51de96fe0cd78cb379e6758d7e357c91daa2791)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I fixed several occurences of cross-references to whole manuals where
the formatting was split in the <ulink> statement. The <ulink> tag
and the manual title must be on one DocBook line in order for the
sed scripts to correctly process the links when the mega-manual is
created.
(From yocto-docs rev: 0dee12d518c892f59c0446e1c7b5d0f71b6ee22b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed several references to books. There should be no books referenced
using "The" at the beginning of the manual title. These need to be
"the" in order for correct mega-manual link processing with the
sed script.
(From yocto-docs rev: 76753216c7138d55f7b6f9167d678245ab3134e7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the notes that say "Due to production processes..." at the start of
each manual contain links to manuals. the links needed to be formatted
such that the entire <ulink> code and manual name appeared on the same
line so that the sed script can effectively remove the link in the
resulting mega-manual.
(From yocto-docs rev: 0a41971c331ad1961e6ee1e067b59c36c9f048f6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved "the" outside of the generated HTML link so that the sed
script will process this part of the manual correctly for the
HTML mega-manual.
(From yocto-docs rev: 3bdf7c7dc4478f2a435cbc84a8a815daf7130660)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The references to the YP Development Manual were inconsistant.
These references were fixed.
(From yocto-docs rev: f4ded0b965fcbce7b500ca21886ee9b755c38383)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The way I refered to the YP Quick Start was inconsistant.
I have made edits to remove these.
(From yocto-docs rev: d9487c60db23861e8a9dd2c81ac46d4960abd462)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I had to rename individual style.css sheets to have book-specific
names. So style.css for the ADT manual becomes adt-style.css and
so forth. Turns out, this isn't really necessary for the solution
to create the mega-manual but I am leaving the changes as a
separate commit because it makes sense. It causes no disruption
to making the six YP manuals.
(From yocto-docs rev: 8cbdae1fe86988243f91dfd611c14f8a37007886)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the first sentence of the description of how to use QEMU images
with NFS server. This is feedback from Scott Garman's review.
(From yocto-docs rev: 6a33b1b58bd72756baf57228b7348ff662248012)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2929]
Provided an updated section on how to install and configure the
Eclipse IDE so that it supports both Juno 4.2 and Indigo 3.7.2.
The fix included creating a new poky.ent variable that is
Juno-specific.
(From yocto-docs rev: 6b0b046322420f56feb644eb6de8341dfac59df2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated an old comment in the layers.conf file example to say we
have recipes-* directories instead of the old packages directory.
(From yocto-docs rev: c39394e848d6039e6728b7e53de86958f951e258)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two areas of the manual updated to reflect the fact that not all
QEMU images have an SSH server in them.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: a173d8cb05ee695b02188a037ee047db016c6a67)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The detailed chapter that describes how to install and configure
the Eclipse Yocto Plug-in has been moved to become a subsection of
the "Workflow" chapter in the YP Development Manual. This commit
accomplished the bulk move, edits to integrate the information,
and fixes to all cross-references. Moving the chapter creates a
sectioning issue in the YP Development manual that results in
subsections that are six levels deep. Not ideal. Will look at
fixing these with a subsequent commit.
(From yocto-docs rev: e6abff8f578f2cf6997895260f607395281ae8e8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The name of the ADT manual has changed to the "Yocto Project
Application Developer's Guide." This change had some ripple effect
regarding cross-references into the manual. These are now fixed.
(From yocto-docs rev: 7ba25c470b03a85098388e6cca7c78a6ebb245d8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In preparation for taking the Eclipse installation and configuration steps,
I have made an edit pass through the section "Workflow Using the
ADT and Eclipse". Minor edits performed to integrate the new
information.
(From yocto-docs rev: 7b4e0ae371b23f329451ac768b7d9eab5931df2d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the creation of a new KMACHINE glossary item, there were two
areas in the YP doc set that reference the variable. I added
cross-reference tags. Also noted that some other references
were missing to the variable COMPATIBLE_MACHINE.
(From yocto-docs rev: f740b62be175a50f17ce8a244258dcf391fcf672)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have updated both the section for configuration fragments found
in the BSP and dev manuals.
Reported-by: James Abernathy <jabernathy@gmail.com>
(From yocto-docs rev: 62f4df751c80e7b749356bb80ade3a7847411f7c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Caught and fixed a stray reference to "appendix" that should be
"chapter."
(From yocto-docs rev: 97d26495dd9b561bb5724a86e9cd777eeef9f71a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of moving the reference manual to a real reference manual I
am removing the "appendix" classification and having everthing be
a chapter. I changed the "ref-varibales-gloss" appendix to a chapter and
made sure any references in the doc set use the proper term now
(chapter).
(From yocto-docs rev: 3f541c20c7aff1012eb4c06cb856bf9795124822)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of moving the reference manual to a real reference manual I
am removing the "appendix" classification and having everthing be
a chapter. I changed the "ref-imagese" and "ref-features" appendices
to chapters and made any references in the doc set use the proper
term now (chapter).
(From yocto-docs rev: 08117634034a5cd5567c971957583d986c9ee9a4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: ddee80872afc567b9381387980f257b337f29ea1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the section "Using an External SCM" to the "Common Tasks"
chapter. This information was formerly in the YP Reference Manual
in the old development chapter.
(From yocto-docs rev: d34cd9e86cb7a6b27cf6a5b4daf58c445dd86331)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I inserted the section "Using a Development Shell" into the "Common
Development Models" chapter. This information was formerly in the
YP Reference Manual and is being moved out to help the ref manual
become a truer reference manual.
(From yocto-docs rev: f4ca1c567afcebbae119f21c147e3c38c7ffd54e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO_#2671]
Added a bit more in here about considering requesting rights to have
a contrib area to YP and OE if user is a regular and significant
contributor.
(From yocto-docs rev: b54bba33b2706bed593a9ee66d5c72f820c37d32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section that describes how to send a patch upstream via email
did not have a good connection to the various mailing lists. I
added some references to this section and also mentioned using
the scripts if the user has many changes to commit.
(From yocto-docs rev: ad75ae45420c43bda974d22b02094237b5c7cc50)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bug 2256 is now fixed in master and the fix will be in the next release,
so update the documentation accordingly.
(From yocto-docs rev: 877a7ecfd1623417d0793a5dd16b66c35b6fdbae)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"shared state cache" is the generally accepted term for this.
(From yocto-docs rev: a15f629afe46e7217182a1ac077ab59641be9a8c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's CONFIG_SMP here, and since the title of the section already
mentions it, just change the sentence to be more generic.
(From yocto-docs rev: 32e6145b5f41d4eb293f8267ef01d02217143152)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Change some of the language and patch submission directions to
correctly represent how we work together with OpenEmbedded (this
changed with the introduction of OE-Core a few releases ago).
* Correct --help option to -h for pull request scripts
* Clarify commit message guidelines
* Touch up a few other bits and pieces
Fixes [YOCTO #2671].
(From yocto-docs rev: 3170ce5e0757951afee13207c117316e33449b39)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Throughout the manual, the kernels that are built and available through
the Yocto Project were being referenced as a "Linux Yocto kernel."
This reference is poor. First, it placed Linux and Yocto very close
together and could upset the Linux folks. Second, a better way would
have been to say "Yocto Linux kernel." I have fixed by referring to
kernels that are available through the Yocto Project as
"Yocto Project kernels."
(From yocto-docs rev: 9b8319328cd4ab4ce3363001c9feeec585d9cab9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have replaced the term "Yocto Project" with more appropriate terms
where possible.
(From yocto-docs rev: 622ef9a2b4897ecd151b641b43d7706ab673c989)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scrubbed the manual for the term "Yocto Project", which has been
over-used. I updated occurrances to better represent actual bits
rather than generically referring to everything as Yocto Project.
(From yocto-docs rev: f70cffeffa0d8863a88783607621bf6f7125d02d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example did not specify to switch to the "denzil" branch after
establishing the local repo of poky-extras. The example will not
work without this step.
(From yocto-docs rev: 90071570bca2edfceb4adb91bdd9093c095c8825)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previous renditions of the term "Build Appliance" referred to the
VMware system. However, it was determined that the term
"Build Appliance" should really refer to the actual image that
can be booted and run on the VMware applications. I have updated
the areas affected by this change. The change assumes the name of
the built or downloaded file you boot will be named
"build-appliance-image."
Fixes [YOCTO_#2656]
(From yocto-docs rev: 6b27b7d92b9722351eb43a7c2a341ce3af056dba)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor typoes in first couple chapters
(From yocto-docs rev: 36618cc6a261a994b00c5c524c76cbf3952a2eae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved the sections on remote debugging and using the profile out of
the YP Reference Manual and into the YP Development Manual. These are
now two sections in the "Common Tasks" chapter.
(From yocto-docs rev: 42640bf69aa05c56eb112c10b6d7b96069173785)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section "Modifying Temporary Source Code" that was in the chapter
for "Common Tasks" was moved to the "Common Development Models" chapter.
After discussion with Darren Hart, modifying temporary source code
is a valid develop model. So, rather than isolate it in the common
tasks chapter it has been placed in the development model chapter,
which now has four types of development.
Changes were made to update the introductory text of all the concerned
areas of the manual.
(From yocto-docs rev: 8b07ee3bcda9c13e576b54b0079b0656cd8fcc32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Using Pre-Built Binaries and QUME" section needed to incorporate
some information from the YP Reference Manual. I have merged those
changes in and did some re-writing to blend it well.
(From yocto-docs rev: 5c20f00f9ec75c19fd0106c9f241751381ba7e3c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed two larges sections of old comments.
(From yocto-docs rev: df1b08b621f2b449c7575b86ec90c40f1606c43d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated a note to include information about what happens if you do a
kernel build and have your machine compatible with every possible
kernel. This extra information is useful for rational.
Reported-by: Bruce Ashfield <bruce.ashfield@windriver.com>
(From yocto-docs rev: e631ec44be49d456add6a53ff3db89016d187370)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The linux-yocto_3.2.bbappend example was out of date. There is no
longer a kernel features statement in the last part of the section.
Only COMPATIBLE_MACHINE, KMACHINE, and KBRANCH remain. I removed
the fourth one from the text description and the example code.
(From yocto-docs rev: 1a6d3cad48f1b52e5b029434ce655940c6024694)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a note telling the user that the commit ID strings in the
example might not match the actual commit ID strings found in
the .bbappend file.
(From yocto-docs rev: 5cb845361c8ce8b60dcafc28d1bc01d54badd67a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to a bug (2256) the example that changes the kernel configuration
through menuconfig did not work. I have re-written the section
to now start with the default behavior of CONFIG_SMP=y and then
have the user change the configuration to where it is not set.
The changes include the reversing of the flow and the work-around
needed due to bug 2256.
(From yocto-docs rev: 6fa9eee12ed83f81470beb9792fb4fc1c5104f69)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added entries for the Manual History table for upcoming 1.3 docs.
(From yocto-docs rev: 430b384035593cd05c4f286e20c01f0fe72da8ec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example that compliles the altered code will not run now when the
KMACHINE statement is in the linux-yocto_3.2.bbappend file. I have
commented it out of the book.
(From yocto-docs rev: 3f67b34daf1ad598b4d07f5e2a60d8c63da754b2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The KSRC example needs "_3_2" at the end of the variable.
(From yocto-docs rev: e6bcbe8504f72777a03e9b08de95d5e2741700a3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Turns out the KSRC_linux_yocto ?= /home/scottrif/linux-yocto-3.2.git
statement in the linux-yocto_3.2.bbappend file in poky-extras needs
quote characters around the pathname. I updated the example
statement.
(From yocto-docs rev: eac1b53c04398152b41ac280fdc030615c165112)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found two instances of "yocto/standard/common-pc/base". this should
now be "standard/default/common-pc/base".
(From yocto-docs rev: a2f4ac3885de1157e6d718cfea9b29a67c76aeb0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel used for example is no linux-yocto_3.2. I changed
all occurences of yocto_3.0 over to yocto_3.2
(From yocto-docs rev: 7ee8f86fd0f44197901c851a16c58aa5f6851b1f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example code with the printk statements needed to be altered.
And the wording supporting the example was modifyied to be more
generic.
(From yocto-docs rev: f76465e920c3959230196814f17890065c613730)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Looks like calibrate_delay(void) changed in the example. Updated
to the most recent code.
(From yocto-docs rev: f1abcbf730c4b50ceb925e41181429c04eb2d55e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the example sets up the bare clone. The shell output changed
because the upstream repo changed to
"origin/standard/default/common-pc/base".
(From yocto-docs rev: cc3a8dde7b7f70174225ec95303d0280697d674b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New image needed for Denzil. I created a new file named
"kernel-example-repos-denzil.png" and copied it to the
Figures folder. I also deleted the
"kernel-example-repos.png" image.
(From yocto-docs rev: 97105187735c15e452580a0174897517c1860f2c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the "Building and Booting the Image" section there is an example
.hddimg file. I updated the file to be the actual file used during
the BSP example build.
(From yocto-docs rev: 165feb4d501a2ed984b742ea9f10e6c2037972da)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For 1.2 you evidently need to add $HOME/poky/meta-intel to your
bblayers.conf file.
(From yocto-docs rev: d5565d9aa14590622373996a037cc16d34e9107f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wording for linux-yocto_3.2.bbappend file updated to support the
addition o fhte KBRANCH variable.
(From yocto-docs rev: 267d7dffc05dc495dbd27b6435bea7ba48cd4cfa)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
edited it to now include the PREFERRED_VERSION variable.
(From yocto-docs rev: 72d8f7bfcad0fff191c998f90369499a78d62696)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section on changing recipes-kernel was way out of date.
I updated all relavent changes.
(From yocto-docs rev: 91538864e6da8c4d0a495e52feafe01ce7afea9d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kernel used in now 3.2 and not 3.0.
(From yocto-docs rev: 974cb0c3665a2767a04ab6261692e93cc2f9200b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The layer.conf file now uses a LAYERDEPENDS variable. I added that
to the example.
(From yocto-docs rev: 237eb7ba897479935ac4c3165ce2cb350143a1e3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel in mymachine.conf had to be changed from 3.0 to 3.2
(From yocto-docs rev: cd94a4d45a062e9282de15dfda25983c500c0548)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The output for creating and switching to the denzil branch
for meta-intel needed updated.
(From yocto-docs rev: ad29c8f73ab3cec930f21939744cff322b43dfdc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The variable substitution had to be changed from
"&DISTRO_NAME;-6.0.0.tar.bz2" to "&DISTRO_NAME;-&POKYVERSION;.tar.bz2".
(From yocto-docs rev: 258b4c7fb46d2e6fb2da7bf2f59cd4f5c035b15b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created a link to the Yocto Project Files term.
(From yocto-docs rev: 9d92248cb5dd862095e815c008e1f47e7518856a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to remove "poky-" from the front of this variable that resolves
to a YP Files top-level name from the tarball.
(From yocto-docs rev: a9ccf2bec4f2f916e854d10aa992f0c45eb0ed3f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Throughout the documentation set I have refered to the YP build
system generically in order to avoid use of the "Poky" term. Richard
has suggested that we refer to the actual thing that does the building.
So I have added BitBake to this particular sentence to refer to the
tool.
(From yocto-docs rev: eaed76bbf97bd34205eace952a1efbc600890815)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
