Applied review comments to this section.
(From yocto-docs rev: f4075f61ca081df6c87abd876207da968450a8f3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review comments to this section. Specifically, I addressed
the organization and got rid of the bullet list. I integrated this
information into the examples used for the various SRC_URI snippits.
Also, part of the feedback including separating out the patching
information into an isolated section. I set up the section and
moved minimal information into it.
(From yocto-docs rev: 0a16977c2125402cdd04e24ad5bce074859eb28a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Corrective edits to this section based on Paul's feedback. Several
items addressed.
(From yocto-docs rev: a09ebe38e0ad22ad4ab12eab3d5a73166e4c56f8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Re-ordered this such that the storage of the recipe comes first
and that is followed by naming it. Also, formatted into a list
to give a better sense of the suggested order.
(From yocto-docs rev: aead82f034a097cbdfe38b3b1f09a60cc411d6ea)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the introductory paragraph to be more general about where
a user might locate an existing recipe as a base.
(From yocto-docs rev: d6147d19785824cde29e82aa32916dcec5ae2276)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the note structure for the information about BitBake
parcing curly braces. The note was to prominent. I added a
leading sentence to better integrate the information into the
section.
(From yocto-docs rev: 21dd7ceced2c9867e4fefc2aab81a4ab3da3bc7d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was some confusion to this section as to just when post-install
scripts were being executed. I looked it over and the section really
is focusing more on the situations when you are creating a read-only
root filesystem. So I went through and did a small amount of
editing to just clean up some loose text.
(From yocto-docs rev: 1b3674a5d123e74748bce5de61722079d4740908)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The LIC_FILES_CHKSUM was out of date due to a merge in poky.
I updated the single instance in the manual set to use the new
hash.
Reported-by: Richard Purdie <richard.purdie@intel.com>
(From yocto-docs rev: 4cfdf391326f2c5750404a8d7f31999f75bc26fe)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
You really are not compiling the recipe.
(From yocto-docs rev: 82ca9176375c34f3c5b6694b0f205794684a2f01)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I commented this out based on Paul Eggleton's suggestion that
we should not be presenting this information.
(From yocto-docs rev: fe2ee21e42134f0ffc9347f8c0336169f8f52aa6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Merged the concepts in the old "Adding a Package to your Software"
section into the new "Writing a New Recipe" section. This completes
the feedback from Paul, which was extensive for this new section.
(From yocto-docs rev: 522673e1aa068b8d089dfefb5b234a48062da3fb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change merged in the Hello World section as a summarizing
example section to the new "Writing a New Recipe" section.
(From yocto-docs rev: 79c858e1590e5ab4c56b19dc51b03e0e570b6209)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This involved a first draft and implementation of Paul's review
comments. Also worked on the "Configuration" section.
(From yocto-docs rev: 0e168dbaf5f4949c4c5f79fe7da406ca91390e22)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the recipe creation figure. I had to re-order the flow
and also generalize the supporting services installation part of the
diagram.
Fleshed out the "Fecthing" section with SRC_URI examples and much
more detail.
(From yocto-docs rev: 6a23ab2beb90376c11c426ac8bf5618994585a9d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have added some stuff to the section on fetching source in the
new "Writing a Recipe" section.
(From yocto-docs rev: a4b340d58888927bf648be34402670f8a7d87d8b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This draft has the structure with text from Paul's email. It
needs further work.
(From yocto-docs rev: 08025edc34995f7436786e9ed3abdfa155db47af)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From yocto-docs rev: c031c014bae6d6e4a239a4bcd1e8b9d5d272f851)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Created a new figure for the flow. This involved putting the figure
into the "Figures" directory of both the dev-manual and the mega-manual
and then updating Makefile to include the figure in the TARBALL
variable.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a link to the PRSERV_HOST variable. That variable is
now defined in the ref-manual variable glossary.
(From yocto-docs rev: 7166fe94107cd379081fd81b7351ec081aa2c6ae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As an actual example of using AUTOREV, refer the reader to the
Yocto-supplied poky-bleeding distribution.
Also cleaned up some wording and added a Caution statement
about the distro not being regularly tested - Scott
(From yocto-docs rev: 2a74573af702c905274e377304a946fd335a0182)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
i'm still looking at the dev manual for more changes but those would
be more substantive changes, so i'll pass along just this collection
of minor stuff.
(From yocto-docs rev: 94e2422d6e6e408e2dd76b15e1231814b123800d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This now involves only making sure that "packag-management" is not
part of your IMAGE_FEATURES statement for the image.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 9cb66c40677adc43088d22900fef58166ee8b508)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the intro text for this one-line example so that it
would not imply that the example is the only syntax that can
get the job done.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 5d0151b692bef9ef67a6237f3e4e4387e6f00c63)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a small note in the section where you create your own
distribution to be clear about where the name is set.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: a2ce7d82eb7f3edbaebce65c73e6ae3c0c921152)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than saying menuconfig is "built", I changed the text to say
it is "run."
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 74b7a193e8356931e5a0db2ea76b4543880ed2ec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The four sub-sections describing how to customize an image seemed
to be backwards as they progressed from most complex to easiest.
I switched up the order and provided better transitional
introductory wording for the four sub-sections.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 1e8d178c401d3020621fc90af5cdd0bb3e37be87)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I noticed that chapter 10 of the ref-manual still had
"Reference: Features" as the title. This is left over from way
back. I changed that chapter title to "Features." Next, I
noticed an inconsistency with some sub-section titles.
I changed the "Images" title into "Image Features." This affected
several links across the doc set so I had to update those
cross-references as well so they have the latest section title
as part of the reference.
(From yocto-docs rev: b68f009a92e0e24802e367d98cf66e15ba1cd364)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The operator used was "=" which was inconsistent in light of
previous uses of the variable in the ptest section. I changed the
operator to "+=" to be consistent.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: d6b7c7e15290e64f4baac25544224788e92ad309)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After adding "Package Group" definition as the original "Task"
definition, we needed to create a new definition for the term
"Task".
(From yocto-docs rev: b6eae9242bf488d3f086e496b52d8422ad31feb6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: faa7206b2f67a26c1366fe997cd092aed7e9f85e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the note indicating that three specific recipes were
"ptest-enabled" for the release. I substituted in wording that
tells the user to see if a a recipe inherits ptest as a way
of determining if the receipe is ptest-enabled.
(From yocto-docs rev: 9136617575eb7a0a08f0b81f75ae6cdede62219f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the wording so that it reflects better what is actually
going on when use IMAGE_INSTALL to afect an image.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 243588460fb76a0c333772e3dce566cf664397ee)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
given the length of chapter 5 in the dev manual, i'm going to do
this in bite-size pieces.
(From yocto-docs rev: ccfe3e719bf71236e50b3e4507a6d63199f24ff5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* is it technically correct to say there are now 5 BSPs? as in, does
genericx86-64 count as a new BSP distinct from genericx86? [aside: are
there any plans for a MIPS64 BSP?] - rpjday
MIPS64 is under development. - scottrif
* if scott is up for it, a couple more variables for the variable
glossary might be BASE_WORKDIR and TARGET_VENDOR, which i would have
added to that variable list but they don't appear in the glossary
- rpjday
Noted. - scottrif
(From yocto-docs rev: fae6f8baebedaa72f5e37b4f1a39a9accf9b196c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
scott (or anyone else) is welcome to use any or all of this, or
tweak to taste. i have a few other concerns with ch 2 but i'll read it
more carefully to make sure i'm reading it correctly. - rpjday
I implemented all but the addition of MIPS64 as it is not tested
using the autobuilder yet. - scottrif
(From yocto-docs rev: 927ff9be66a7471a33faf18a1122ce8b2bd21805)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The examples went stale. Two out of three did not work. I have
provided new examples that work.
Reporte-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 0a3695f3f6a5b31617f4a5da960677f87733b825)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed wording to remove implications of meta-intel clone
importance regarding working with BSPs.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: e5f80aadf6f651af6efae6e99d0a4d9b6e76fc99)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was inconsistent use of the way directory names were
handled throughout the YP documentation. I have scrubbed the
set and replaced many instances such as the following:
meta/<something> replaces /meta/<something>
poky replaces ~/poky (except in some very specific examples)
I basically got rid of leading slash characters.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: ae2e451ed8f61484d04b30017021912c4493a441)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5408]
Added a cross-reference link for this variable into the glossary.
(From yocto-docs rev: a6f4935b60222a97a5fe03a538a3f8042e18d3f6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5408]
The developer's manual should only refer to functionality which
is available in oe-core. Currently, this passage requires the
user to add a package from, and use facilities of, meta-oe. This
fix describes how to use facilities in oe-core to the same end.
(From yocto-docs rev: 2dfaa88ae4760f86dbbdc8b58de7feba25a8014a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5203]
This was reviewed by Alex and an ordering change was needed due
to the order of how things are created during the workflow.
(From yocto-docs rev: 0c630fed9f9a609c1ca13359efe47cad6f60e00b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partial fix for [YOCTO #4414]
I put in the API stuff as well as made sure the other comments
for the dora-toaster branch and temporariness of the GUI were
mentioned. Probably more tweaks before this section settles
out.
(From yocto-docs rev: 4df966bb21a014b8fcac69abb7b912e109089606)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partial fix for [YOCTO #4414]
Got some feedback on the section and added a step that the user
needs to checkout the dora-toaster branch after clonine poky.
Also, that the Django version is specific and not the listed
version +. Finally, a bit of wording to note that the GUI is
temporary for this release.
(From yocto-docs rev: 775d55f33a4dfbb21db896b81159e16ee7e16034)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The meta-yocto-bsp/conf/layer.conf example had gone stale.
I updated it.
(From yocto-docs rev: bf77d70789f85400e2d6be7e4e32475506183217)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This site has disappeared and I don't think there is a
replacement.
(From yocto-docs rev: 711488b664e1da7f3a4c64af3fbd4012bfb44d56)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partial fix for [YOCTO #5368]
Updated the figure to not have the tarball method in there
for setting up poky repo locally. Also, added specific references
to the environment setup scripts.
(From yocto-docs rev: 7c6ececaf8eb987206567077f42213dbe4cdc4f2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partial fix to [YOCTO #5368]
I updated the workflow so that it does not have the tarball
extraction option to set up local copies of poky and meta-intel.
The figure is housed in dev-manual and mega-manual.
(From yocto-docs rev: d70214d7d348d38b574561339987bd3371167a48)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5368]
Partial fix to the tarball removal issue. I rewrote parts of
this term's definition to slightly de-emphasize tarball expansion
as a method to set up the Source Directory on the local machine.
(From yocto-docs rev: 2fb1e569129e9942ca4a99fe7f73de02ccbd1876)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5368]
This is a partial fix to the removing tarball setup method issue.
I have modified the "Yocto Project source Repositories" section to
de-emphasize the tarball installation method for poky and meta-intel.
We cannot remove these obviously because the download page of the
website gives the use access to tarballs. Also, the Index of
Releases basically does the same thing. So, we can't ignore the
fact that they are there. So, I added a note basically saying we
recommend the Git method for creation of poky and meta-intel on the
development system.
(From yocto-docs rev: 7843ea5e592582f74a02536ec4057067c43eb507)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5368]
Partial fix for this issue, which is removal of the tarball install
methods for poky and now evidently meta-intel. This commit removed
the tarball install step for meta-intel in the "Supported Board
Support Packages (BSPs):" bullet item in the getting setup section.
(From yocto-docs rev: 98f13d8178a63258e2b80d78796e473d09abb452)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5368]
Partial fix for the bug. This part removed the tarball install
method from the getting setup section of the second chapter. I
did some rewriting to smooth it out.
(From yocto-docs rev: b051433e34e0f3a46deba0b2b4815ab77fde62c8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4414]
Some changes to the toaster section according to the updated
toaster wike site and Belen.
(From yocto-docs rev: 1e66b4d377c21fae179826dab5ceb75b9aea1a1b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5368]
Changes partially address this issue, which is the removal of
tarball installations for poky. The notes at the beginning of
the YP manuals suggested that the tarball version of a manual
might lag the version found on the website. Because we are
discouraging installing poky/documentation from a tarball now,
I have re-written the note to be generic and suggest simply that
for the most recent version of the manual associated with the
release, see the manual on the website.
(From yocto-docs rev: a5e96e7eb719e69bbcf2139af2e20230aedc4247)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the '-ptest' complementary package to the list of packages,
which included '-dev' and '-dbg' when using inherit packagegroup.
Robert P. J. Day pointed out the code in the OE packagegroup.bbclass
class that showed these three packages all together.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 823555ac44958995426cc631d992b9d276c42ca4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the comments for the section that describes how the
Toaster works with a GUI. I also commented out the smaller
section that was used in place of the GUI section before it
was fully functional.
(From yocto-docs rev: 9c82007f23c83806d9c3748369b61426196b748f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated all six tables for both 1.5.1 and 1.6 releases. Both
entries need to ultimately be in the 1.6 version of the
manuals.
(From yocto-docs rev: ac1d2cc5686da142562cd674f7fa8908895a27df)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5203]
Adding a BB Commander project location that is the same as your
Eclipse workspace causes an error. I have added a note warning
the user to not do this.
(From yocto-docs rev: 0eca6618be8e4765b8513fb5951257ec17cdd355)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made some minor edits to this section for better wording.
(From yocto-docs rev: 614bbc24272461db6a1534334dae7b758001211d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The actual file listings for the formfactor_0.0.bb and
formfactor_0.0.bbappend files had changed. I updated the listings
to match the actual files with the release.
(From yocto-docs rev: a7a610223a5ce98d806e99474764381ca9752775)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I applied some capital letters to a bullet item for consistency.
(From yocto-docs rev: ee24d04512e9a211499e546b06e5121ee968f88f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Figure changed do to how they store images now. Figure needed
a new level in it.
(From yocto-docs rev: a7d9484cc1cbba37231e5238c92cb22099345ec9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found a couple broken links. Also, noticed the yp-download figure
was out of date. Especially in the Figures folder of the mega-manual.
(From yocto-docs rev: 2e55faca221186d157dd5f77d048f1b2b90d5d91)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor read-through edits.
(From yocto-docs rev: 8a2df890390dc6d64f364c0f4c294cc0742e3f43)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes the prompt to be "#" rather than "$", which is a
convention for running commands at a different level according
to Trevor Woerner.
(From yocto-docs rev: b8eebdf4738c8655db724498a2293a44cae331dc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes modify the patch sent by Trevor that essentially
re-wrote this section. My edits were for consistency only and
style of the book. No technical information or flow was altered.
I did rename the section to be active to match the other package
related sections. This caused the link in the ref-manual in the
classes chapter to have to be updated.
(From yocto-docs rev: eb2f950786574b1e90adc673ef00f52a70db9be6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Trevor Woerner's patch as submitted with no alterations.
This patch rewrites the entire section on setting up
runtime package management. The section will need to be edited
but that will be a separate exercise. This commit captures
the raw patch.
Note: one external link in the doc set broken after application
of the patch because a "section id" tag was changed by the
patch. I am leaving that fix to a separate commit.
(From yocto-docs rev: 4de8df9c9da2e43b5125d1c52889d4408870a4d7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Placed the release month of October in for the 1.5 release.
(From yocto-docs rev: c0431b2b3115d9687dcb5d3ba37adf6bf4695867)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review changes to the following variables:
IMAGE_NAME
DATETIME
SDK_ARCH
IMAGE_BASENAME
TUNE_PKGARCH
PACKAGE_GROUP
COMPLEMENTARY_GLOB
BUSYBOX_SPLIT_SUID
Also, reformatted some 1.5 package version requirements into a
list rather than a lazy literallayout tag.
Provided some new wording for the "Directory Layout Changes"
section in the Migration chapter.
(From yocto-docs rev: 60c3a905dd9212f1b4f6969341640a0726342d11)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton sent me corrected procedure. I implemented his
changes.
(From yocto-docs rev: 581778c52493b662f449bbbed36453f161501c18)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a step on making sure they have Oracle JDK in there
to the section that builds the plugin. Also, removed the
third method to install the plugin.
(From yocto-docs rev: cfd2b88717a709049155a8ff15134b617fc6e172)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a link to the "Toaster" page at the end of this short section
to point to the section on "Installation and Running" Toaster.
(From yocto-docs rev: 3d50425487f68960e50670601b7a38e6fc3a15ad)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied a second round of review edits from Paul Eggleton
for the new "Performing Automated Runtime Testing" section.
I did some reorganization and some minor wording changes.
(From yocto-docs rev: fa8f8e5f0f6c1377a4fcafcd3d933af15ac01ff3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
YP 1.5 default kernel is 3.10. This is a change from 3.8 in
the previous release. This change affected several areas of
the documentation.
1. The BSP Guide had a crownbay BSP structure that did not
account for the new default.
2. The yocto-bsp tool output still asked for the 3.8 kernel
as the default.
3. The recipes-bsp section had 3.8 used and had some bad
listings that had to be changed.
4. The recipes-graphics section had 3.8 used and also had some
stuff supporting two versions of the graphics (emgd and
noemgd). I had to pull the emgd stuff.
5. There were miscellaneous spots in the dev-manual that were
referencing 3.8 as the default kernel. Particularly the
list that shows what kernel repositories we have. That needed
updating.
(From yocto-docs rev: 9826ce760884f2ce5a4eb72c6a731a85cd6f2b2b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section and variables for performing automated runtime tests
on images was reviewed by Paul Eggleton. The suggested changes
were made.
(From yocto-docs rev: c2f84ea3c162892e4da3df30fb833f88bab3d3cc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new section called "Running and Writing Tests for a
QEMU Image" to the "Common Tasks" chapter. This information is
based on Stefan Stanacar's wiki page information. The section
provides the same information as the wiki sans the log files.
(From yocto-docs rev: ca2294821e34bbcd0afe7dd27421e8c6a828d700)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
First pass at changes to support Eclipse Kepler 4.3 release.
(From yocto-docs rev: 265bc3f4ae3442b2fd0490d0f4558c7a584cb31c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I went through the "Working Within Eclipse" section and set up
structure to add in the Kepler support and drop the Indigo
support. Along the way, I formatted the entire section to
hit within the 40-character limit exclusive of the links,
which always overrun.
(From yocto-docs rev: 762291589382f7ef71e77f8c92dae2371f3ae6e7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed all these occurrances throughout the manual set so
they are consistent. The only ones left are now in pathnames
or UI things where they need to stay that way.
(From yocto-docs rev: 1b77f34b7b6983f7d7e680cd9fd6a714c00ba8f8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5037]
The information to fix this bug was very similar to some
"best practices" and "recommendations" information that was
currently buried in a section that described how to create a
layer. So, since the new information for this bug fix increased
the amount of information significantly, I have pulled out the
existing "recommendations" and "best practices" information and
combined it with this new information and placed it in its
own section dedicated to just that. The information still
resides in the main section that introduces and discusses
layers and their creation.
This is a first draft of the section. It is under review.
(From yocto-docs rev: 066de04511afb0641278f3fda4e97718b3ed5c47)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4730]
The web interface for Toaster was cut from the 1.5 release.
I have commented out the existing section and replaced it with
a short introductory section for the API only.
(From yocto-docs rev: 7864e6d9958a9e582f5035f28afb063ef584396a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The variable ##COREBASE## has been deprecated, so use
##OEROOT## instead.
(From yocto-docs rev: 4520a2e41bf229481bd959e494e5bde84bbcfc51)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the manuals to reflect the recent replacement of atom-pc with
genericx86.
(From yocto-docs rev: 8f77006d74b77000f56b64581cb5f6474f53a4f1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4079]
The changes here address the documentation component of this
bug. There is now a new section in the dev-manual in the
"Working With Packages" section that describes and introduces
the three variables the user can use to control this feature:
BAD_RECOMMENDATIONS, NO_RECOMMENDATIONS, and PACKAGE_EXCLUDE.
(From yocto-docs rev: a7e2097c43955db99ec068068d4291fc4e1deaf8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The main changes are captured in a new section devoted to the
oe-init-build-env-memres script within the ref-structure.xml
file and in the variables.xml file in a BBSERVER variable entry
in the glossary.
All other changes were necessary to integrate the new functionality
into areas where running the setup script are discussed. Before
this feature, there was a single setup script (oe-init-build-env).
Consequently, wordings and such were designed exclusively for this
single method. With the introduction of a second possible method
to initialize the build environment, tweaks to many sections were
needed. Beside the wording tweaks, appropriate cross-referencing
was also needed.
All these changes cover the integration of the new feature.
Reported-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From yocto-docs rev: c55c9a53c9b4cd1e06e6e81e32d56f9bbf5fe98c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4730]
Edits to the new section on toaster. These are from Belen's review.
(From yocto-docs rev: f1462bd53bf39c706a87af86830a92b451b3e00c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4912]
Throughout the manual set, various areas talk about the Linux
distributions we support and the required packages among other
items that are tied to a distro. Debian had been missing except
from the list in the ref-manual that shows the releases we test
against.
I have attended to all areas where Debian needs to be mentioned
now.
Reported-by: Laszlo Papp <lpapp@kde.org>
(From yocto-docs rev: 2004567821add745d320106b0dc6cccb4f73b605)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Did some word-smithing to work around a false statement that
implied externalsrc.bbclass needed to be inherited on a
recipe-by-recipe basis. This affected the usage section and
the glossary definitions for both EXTERNALSRC and EXTERNALSRC_BUILD.
Also updated the "B" variable description to be more accurate
in the use of the term "Build Directory."
(From yocto-docs rev: 46695817b6e44cfa88161699105b8d03a5828fd2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These manuals had references to the deprecated SERIAL_CONSOLE
variable. Changed the links to SERIAL_CONSOLES.
(From yocto-docs rev: 998b8524d2111ebfb6bdb3d4620434cd81d92489)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made sure all the usage information for this class is in this
section and not in the ref-manual. Changes involved using
EXTERNALSRC and EXTERNALSRC_BUILD now to select the source
and build directories.
(From yocto-docs rev: f818d7013502d943517a99b84397e98f5f9dfd9a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made some assumptions that the supporting filenames would
be changed to reflect the new name. If they do not, I will
fix them.
(From yocto-docs rev: 4e71ea30951cef60e5a7daf5f11a197511731b8f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4730]
First draft of the section documenting the webhob service.
(From yocto-docs rev: 4d995519cd4e481445a5399f936fce682d330dfe)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Discovered a random ":S" and ":" character in front of a
couple of list items. Must have been a wandering cursor
situation during an edit session.
(From yocto-docs rev: b81412e255ca90e850bce61ef7f9927692f0fcb5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Based on observations from the various mailing lists, it is obvious that
bugzilla issues are almost always referenced using square brackets.
(From yocto-docs rev: 10b51afe7db62b8eb6e29bd1dd1ba4edb4320f83)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the original version of this file. It has been hanging
around long enough and there is no need for it to be tracked
now.
(From yocto-docs rev: 180465d8f3ab80e1b8bf51d82cbccc3b0e51f976)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the poky-extras repo name to meta-yocto-kernel-extras
repo. This repository had become stale and Bruce did some work
to freshen it up a bit. The name was poor too. That drove the
name change.
(From yocto-docs rev: 4fa2b0f86cfe7191b8de7577d8d8ad6adb984a4e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This term description has been reduced to an introduction only.
The real details are now in the ref-manual. This term now simply
is introduced and the reader is referred to the ref-manual
section.
(From yocto-docs rev: 4d53a25e1871d793d5c38eba4d1f8715c989cb4d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The definition simply states it is sometimes used for
"Cross-Development Toolchain".
(From yocto-docs rev: 477c2f88694feb148111dc69907945d267056eaf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The IMAGE_FEATURE and DISTRO_FEATURE are exchanged.
Reported-by: Jesse Zhang <sen.zhang@windriver.com>
(From yocto-docs rev: 07b09af0d94fed1812465db39aa89edc2db135d0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After a build, the license data is found in ${TMPDIR}/deploy/licenses not
${TMPDIR}/deploy/images/licenses.
Reported-by: Trevor Woerner <twoerner@gmail.com>
(From yocto-docs rev: 7f9b3d842f0f68bd0c005a20d38f1b26aef11387)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The URL naming convention for the YP Release Notes has changed.
It now takes the following form:
http://www.yoctoproject.org/download/yoctoproject-15-poky-1000
The above is an example for YP Release 1.5 and poky release 10.0.0.
I have set up three new variables in the poky.ent file to somewhat
automate the links in the docs to point to the location of a given
set of release notes:
1. DISTRO_COMPRESSED - set to the DISTRO string with no period
(e.g 15 for 1.5).
2. POKYVERSION_COMPRESSED - set to the poky version with no
periods (e.g. 1000 for 10.0.0).
3. YOCTO_RELEASE_NOTES - set to the full-blown release note
URL.
I made two changes to existing links for the Release Notes. One
was in the dev-manual and one was in the ref-manual.
(From yocto-docs rev: e6088927980a1de8022b22f7f38b3046fea20235)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is now a glossary description for the THISDIR variable
in ref-manual. I added some cross-reference links to the
variable in key places of these two manuals.
(From yocto-docs rev: 0d0f756c142c506a66ebc6a1a33e9f124dafd333)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the statement saying that checking out a Git repository
is a backup of the repo. Technically, that is not true. It would
be more of a clone operation. The statement was superfluous anyway
so I decided to remove it altogether.
Reported-by: Trevor Woerner <twoerner@gmail.com>
(From yocto-docs rev: 081bd0119f8c17a3932485857b6846dcb6998ee1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #1706
Applied another set of minor review comments to the section
received from Richard Purdie.
(From yocto-docs rev: 48aa19b7eea9f4b253cbe86981431ec7dc6d78df)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #1706
Richard suggested some technical wording changes. I also added
the new sub-section into the introductory material as part of the
parent section.
(From yocto-docs rev: 201ae16541676365bef69be578433222191eccd3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #1706
Added a new subsection to the section that talks about making
a tiny system. The subject matter fits in with reducing a
kernel image size.
(From yocto-docs rev: 51eb79b88794beaefcb88a4408714a88c9126b2b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Changed the variables in poky.ent to contain the "1.5"
string and the "tbd" string for the unknowns.
2. Updated the manual revision history tables so to replace
the 1.4.1 release entry, which should not be there, to the
1.5 entry.
(From yocto-docs rev: d03a09875b1fe0d244b7a7c1bde718319d95a8ab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Edited poky.ent to have 1.4.1 and 9.0.1 for release stuff.
2. Updated the manual revision tables to have a new entry
for 1.4.1 release.
(From yocto-docs rev: bd4058b98f93ea5fd5d878f24018ce78b8ce1a53)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some re-wordings as suggested by Bill Traynor.
Reported-by: William M.A. Traynor <wmat@alphatroop.com>
(From yocto-docs rev: 2510d9795720afc0309a10b18605e5af4a83769b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied comments based on Ross Burton's review of this new section.
(From yocto-docs rev: d4f5f7b712ea2944efffec9b675341143675efb0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a cross-reference to the section that describes how to
use .bbappend files.
(From yocto-docs rev: 884740c066f0f45cfc85282c6d20737a39d7af88)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I re-wrote this to more clearly describe use.
(From yocto-docs rev: c3d6eecd38c6d4c8b4e0b4e134cbd53ae3fd2aee)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some changes from Bjorn's review. Also included are
some better wordings according to one of their staff technical
writers.
(From yocto-docs rev: 42f2ba26528d4f356422332e8fe95ff4a24337f3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes from Paul Eggleton after a review.
(From yocto-docs rev: 16daab4d3898906dc681d9dad391bd1bc9dce4fe)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed a new title.
(From yocto-docs rev: 43f5ea0a86a6b87f23e59ffd7cb58ead20a26dda)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Realized that the section has nothing to do with booting the
modified image. Removed that from the title.
(From yocto-docs rev: 7fdf311ee23a53dbbd7f70e72768fb48b4afe134)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Re-worded the title for "Set Up Your Layer for the Build."
This resulted in a lone link from the kernel-dev manual changing.
(From yocto-docs rev: bf797a9ad4b40ded6bd3b4dc8cc3d8ac702f05a6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The list was somewhat out of date. Robert's patch fixes it.
(From yocto-docs rev: 8c3c07872a7202315a7501dcd56fb7347668feae)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a note in the bsp-guide to point back to the main
new section, which is in the dev-manual.
Made some small edits to the main section in the dev-manual.
(From yocto-docs rev: 4105c8edbdc531b2a941d7f7282325fae763f059)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some minor fixes to this area as directed by
Paul Eggleton. This represents a clean second draft that
can be reviewed. ]
(From yocto-docs rev: d3380d698d36e83aab16ac74e713ab03baef60b0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are review comments from both Paul and Bjorn.
(From yocto-docs rev: 773300f78b20bd601cbad750cfe32263fbe9d127)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Tracking Bugs" section mentions how to enter a bug using
Bugzilla. I added a new step just before the step that says
to submit the bug that tells the user to be sure to copy the
correct people. The link goes to the section that describes
how to figure out who is responsible for code.
(From yocto-docs rev: 64e58402490267a339c9bade969850da50f39cf1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided three ways to dig out the information on who might
be contaced about a change or patch to an area of code:
1. See the "maintenance.inc" file.
2. Examine BSP README files or the MAINTAINERS file (for BSP)
3. Use the 'git shortlog -- <filename> command to see who
has committed the bulk of the changes for a particular file.
(From yocto-docs rev: 0757a2edddb55bcce2ea1507501220c3097f0a22)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found a couple words that were fat-fingered and fixed them.
(From yocto-docs rev: 593fd043f350bbce302c3de7dce0ab4bdbd2f247)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This should be "User-Space".
(From yocto-docs rev: 68bd187b9d0f3aeb8bc173fa49a97e5b01717661)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3540
Further minor edits to make the example consistent.
(From yocto-docs rev: 863a955f5cf119a38db4950101270bd5a53da027)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3540
Realized that a better organization of the sub-sections could
be applied. Pulled the last two sections up a level.
(From yocto-docs rev: d196db9bf1f88aa0677453396abdd61bf5d724dd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3540
Applied changes per Jessica Zhang's feedback from the bug
entry in Bugzilla. I added some missing steps and also
tried to make the section stick with one example throughout.
(From yocto-docs rev: f995006a90a3646c92d54dc96a8fceae4de758eb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor text editing. Also, updated two figures to be
more recent. One for the Index of Releases and one for the
YP Downloads page from the website. They were very dated.
(From yocto-docs rev: 59255d7c0175a5280239d070ce902079229cf909)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the transcripts used to set things up. I also changed
the kernel used in the examples from 3.4 to 3.8.
(From yocto-docs rev: d83e5a5a73777baf95b5c4558f25a5b0b27c204c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was VERY dated.
(From yocto-docs rev: 6a12809fdd60c707592fff88a5b246a94d6ca220)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated to reflect the changed contents of this manual.
The section was rather dated.
(From yocto-docs rev: 08d126d611155e64d94084378cc0bb1f4cde4924)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rough text for a section within the layer section that
introduces and describes a bit how the new yocto-layer
script works.
(From yocto-docs rev: ee56a264600df9fe250e73b60c8dadd6f8e55009)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made the text more general and explanatory for what the
purpose of the chapter is.
(From yocto-docs rev: 23b595560770d2ffe1465b4a9f18bcf734b7b083)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Applied changes from Paul to the read-only-rootfs section.
2. Applied changes form Paul to the customizing images by using
IMAGE_FEATURES and EXTRA_IMAGE_FEATURES variables. This
was a simple rewrite of a sentence.
3. Updated the note in both the IMAGE_FEATURES and
EXTRA_IMAGE_FEATURES glossary entries to specify inside
of an image recipe (more specific).
(From yocto-docs rev: 762b9e4d3b45a9602284cf4dd1ac281dcbbed7f5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied Paul Eggleton's review comments on the section that
tells about enabling and disabling features through the
IMAGE_FEATURES and EXTRA_IMAGE_FEATURES variables. Using
different wording other than "add" features. Also, some
rewriting of an area that was rather clunky.
(From yocto-docs rev: 13e44345830130318e11b6877e2aff03e6c8ea4f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied the review comments from Paul Eggleton to augment this
section with more information.
Performed a spell check on the entire chapter.
Made the term "postinstall" consistent by defining its first
use in sections a "post-installation (postinstall) script".
(From yocto-docs rev: 179f478777fd02e3fa56d80951ce3eab350fc189)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* BBFILES should be appended to with +=
* BBPATH should be appended to with .=
* Immediate expansion is not necessary for BBFILE_PRIORITY
* Immediate expansion is not necessary for references in layer.conf
to LAYERDIR since these are automatically expanded at the end of
parsing the file (and have been for some time).
* Add collection name override to BBFILE_PRIORITY example
* Fix comments referring to old structure ("packages directory" or
"recipes directory")
(From yocto-docs rev: 0aaac8f5ad97c802ebe1d4f3ffb7987050533292)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I cleaned up the wording to indicate best places from which
to use the IMAGE_FEATURES and EXTRA_IMAGE_FEATURES variables.
(From yocto-docs rev: 68e9c8b3f8d9fe3a086ad77bc0c3b465380476b8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section that talked about IPK-specific information for
installing updated packages onto an existing running target
system is parse and really needs to be in the section that
talks about setting up a package repository. I moved it to
the end of that repo section.
(From yocto-docs rev: 3b1c5858527cba908a5acff1ddc924630cc954b0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A couple sets of review comments from Paul applied here.
1. Added the "read-only-rootfs" item to the EXTRA_IMAGE_FEATURES
variable description and a link to the appropriate section
in the dev-manual.
2. Pulled the how-to-create a package repository section out
of the section on how to customize an image with the
IMAGE_FEATURES and EXTRA_IMAGE_FEATURES section and made
it a stand-alone section in the "Tasks" chapter of the
dev-manual.
3. Integrated the SSH server example into the main topic
because we don't want an isolated sub-section within a
main topic.
4. In the image features section of the ref-manual, I fixed
the link with the "read-only-rootfs" feature to go to
the now-isolated section on how to do that instead of
going to the customizing an image using the IMAGE_FEATURES
and EXTRA_IMAGE_FEATURES variables section.
(From yocto-docs rev: 9c79b5f40d8dc6b37fbe636a2459f89b70bd8ea8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes are the review comments from Paul Eggleton regarding
setting up the optional package repository on the host that
can be used by Smart. These changes reflect the fact that
the task is not package-type dependent or host web server
dependent.
(From yocto-docs rev: 779989878bcc9501ddc4570519d93325442a8493)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I created two sub-sections in the original section. One
covers how to customize the image by choosing the particular
SSH server and the other has the new information on creating
a read-only root filesystem.
(From yocto-docs rev: a0ce1a2784f991b7c0871cbc0783e32dde37e314)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits to add a link and create a more active voice throughout
this section.
(From yocto-docs rev: 2cb62dab03d5ca4de9c9310c4d075fc643b7e68a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created the first draft of the new "Setting Up Runtime
Package Management" section in the dev-manual's common
tasks chapter.
Updated the "Packaging - package*.bbclass" section in the
ref-manual to mention this capability and point off to the
dev-manual's new section.
(From yocto-docs rev: d91c8530dba20839f36c5e247cc447adbedac7fd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Second thoughts caused me to adjust this title again.
Also fixed the cross-ref in the FAQ.
(From yocto-docs rev: 0553790236c60d30306b796587cd5b5213456aff)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I think this is better wording.
(From yocto-docs rev: 4f673b0c3df4a7af4ec54325722e407d12a0e7fc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #2568
These changes are based on Darren Hart's second review of this
new section.
(From yocto-docs rev: b61ef2b6cf96b45666e0f75753b76e0f875663b5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These notes will be deleted eventually.
(From yocto-docs rev: 3c4894eaab5e87efbc06132f8c46e69623a72842)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I created a first draft of a section titled "Selecting an
Initialization Manager." The text was based on information
from Ross burton. This is for the "systemd" support that
is new for 1.4. There is a lot of work left on the section.
This is the first draft.
Reported-by: Ross Burton <ross.burton@intel.com>
(From yocto-docs rev: ad358b96834879abe8a10d89e77453e30799ac0a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3540
First pass at altering this section based on changed methods
and Jessica Zhang's instructions. Rather than fully removing a
couple of sections that have quite a bit of information, I
decided to comment them out for now. Once the material is
reviewed I can remove the sections for good.
(From yocto-docs rev: bde7771166a178dd283fc9baacbee5239c679251)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #2568
Applied Darren's review comments where I could for his
review. Not all questions are answered but this represents
the third draft of the section.
(From yocto-docs rev: da0bc9542259238caf7b474bb15157d80a2b3651)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #1548
Added a new section to describe how to install multiple versions
of the same library in parallel on the same system.
Also, I added some introductory text into the parent section
that houses the three sub-sections that deal with library
use-cases.
(From yocto-docs rev: c77538bc8adae90e4b900f129b63988fa3ab6c9e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #1548
Created a new section called "Working With Libraries". This
section is a parent section for all the stuff about libraries.
Previously, there were two other sections dealing with libraries:
one was mulitlib section and one was about loading static
libraries. It makes sense to have a parent section now that
gathers the three sub-sections together. I have reorganized the
chapter structure to accomplish this.
Also, I placed some IRC chat notes temporarily into the new
section that will discuss how to load multiple versions of the
same library in parallel on the system.
(From yocto-docs rev: 5d150421bcd660a191aff63ebabd577cc19bd421)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new bullet as a tip for best practices that addresses
how we address bug 3071 and 3274. We are suggesting they enable
a PR Service if they are using continually incrementing PR values
when package feeds are published or used.
Reported-by: Richard Purdie <richard.purdie@linux.com>
(From yocto-docs rev: b90497f139b1b6f7ab5510313eb297d5d7fb4e68)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #2827
Replaced the path where one findes the binary for the meta-
toolchain to a more recent example that was built from
the beagleboard and using arm.
(From yocto-docs rev: 020a7fcd7f99c50d32e831b8d51150e8db8ab4e9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the wording on when a user would consider using
the BBMASK variable. It is more suited for excluding things
that cause problems rather than for speeding up build time.
Reporte-by: Paul Eggleton <paul.eggleton@linux.com>
(From yocto-docs rev: 993d7c953a37747297238cd9af53a1f00e737df9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied two comments sent by Paul Eggleton.
(From yocto-docs rev: d3b61e07b5b9db6a582c76f66a984b9f27812a6f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes are basically Paul Eggleton's review comments.
(From yocto-docs rev: bb92dbb968013952c4308b9aeed48223f49c866d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The final paragraph of the "Creating Your Own Distribution" really
should have been in list form and should have some cross-refs
for other parts of the manual. The paragraph is now in list
form and there are some references.
(From yocto-docs rev: 02c4b2e99a3237d1506887659be0e67d6b000648)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a couple of notes to point out the ease of creating your
own distro and not just relying on a Poky distribution. One
note is at the very beginning of the manual and mentions
Angstrom as an example of a distro based on the YP. The
other note is at the beginning of the second chapter.
(From yocto-docs rev: 1525a5e34c615cbfd25aeb12cc7a27ef95b51eab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the "var-" part of links for the creating your own
distribution section.
(From yocto-docs rev: d419cd67084ce25d0d4b4437d8ce4cec180da59a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3403
Provided a note at the front of the "Adding a Package" section
explaining the exception when using a closed curly brace character
inside a shell function with the character at the front of a
line with no leading spaces.
(From yocto-docs rev: a1c0972083751444a8cc89aa8a026f273d98e23e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #1622
In the introduction paragraph I added references to the three
multilib examples that are located in the meta-skeleton layer
within the Poky repository.
(From yocto-docs rev: f284525c6f9b655a61a0ac052a637b0aedb5b694)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3274
Applied several recommended changes for the section describing
best practices when using YP in a team enviornment. these
changes were from Dave Stewart.
(From yocto-docs rev: 7efc9864dc6757e3cf5c026f3c1785e5947cbfec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3274
Applied various review edits from Richard Purdie. Additionally,
I ran a spell-check on the chapter and caught some typos.
I fixed these as necessary.
(From yocto-docs rev: 794a13d26bb7a9e268b16f809158a6af58cc3ce8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3274
First draft of a re-written section that describes best
practices for scaling the YP over a large development
effort. this draft is based on Richard Purdie's text
he sent to me.
(From yocto-docs rev: e5135f76946997a0a060dd16c0b62308be4f6048)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3684
These changes help tie in the relationship between how the OE
build system uses checksums and such and the PR Service that
can track revision.
(From yocto-docs rev: 39a3010a3bb4b2c1d37aef60984ac16e85b56aac)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3552
Added some links to the FILESEXTRAPATHS and SRC_URI variables.
These links connect appropriate sections to a newly improved
section on FILESEXTRAPATHS glossary description.
(From yocto-docs rev: a58e7c6f013393c87381411f918e16a8f04d55d1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #2684
Applied some review comments to the section from Richard
Purdie.
(From yocto-docs rev: 772617a45df10e5e42364854fe03d8aad7cb46b6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These types of links must not span multiple lines in order for
mega-manual to process them.
(From yocto-docs rev: bcea042cd796a51d866f82399b2fd0cc89ec9e2b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hi,
the generation of eclipse help files has been merged from the timo
branch to the master. Since the creation of the timo branch there have
been some changes to the master branch (e.g. new documentation,
renamed documentation).
This patch set does some cleanup for the renamed documentation and
adds eclipse help generation support to the new documentation.
01: Removes the 'the' from the document titles
02..04: Cleanup obsolete artifacts resulting from the merge
05..08: Add eclipse help generation for ref-manual
09..13: Add eclipse help generation for kernel-dev
14..18: Add eclipse help generation for profile-manual
Best regards,
Timo
This patch set originally contained 18 patches. I (Scott Rifenbark)
had to push these changes as two parts. This is the first part.
It does not include creation of the three cusomization files.
(From yocto-docs rev: 9b1889f6e31ee70dae704fa08763fb9196616dad)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a bulleted list to the "Terms" section to help define
some toolchain recipes such as gcc-cross-initial,
gcc-cross-intermediate, and so forth.
Added a cross-reference link to the term
"Cross-Development Toolchain" in the the "Working Using
Stand-alone Cross-development Toolchains" section.
This gives the reader a way to see more on the toolchain
recipes.
(From yocto-docs rev: 2cb612424c0cf6addfd8bce8a0ef77665c35bd9a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Received a patch from Robert P. J. Day but deleted it from
my Thunderbird account so could not apply it directly.
I applied most of his corrections. A couple I left alone.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 2cadd5265fcb5cc281c22ccae81260a6633229e2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3664
Added some information in the note to point out that not all
append files add files into the mix. Some just exist to add
build options. And, in this case the _prepend part of the
FILESEXTRAPATHS statement is not necessary.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 388c441341006227be2f9e7d42bb1c509c32790d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 3272f0d51e3d09f4ffd96b7322f66ffd878d3714)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two things fixed:
1. A couple examples for setting up a layer.conf file were
using the meta-yocto configuration file as an example.
Turns out this is a bad example because the BBPATH variable
is appended to the LAYERDIR when setting BBPATH rather
than the other way around. That is because meta-yocto
is a distro layer. BSP layers, however, are not distro
layers and are the norm here. So I switched up the way
BBPATH was set and actually called out meta-yocto-bsp
config file as a template.
2. Added a link for the BBPATH variable in the
FILESYSTEM_PERMS_TABLES variable description in the
glossary. Just happened to notice this so I fixed it
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 1a594b6dde1a494a5f7322b510e1e67d23635298)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3662
I added more information to the variable desription in the
glossary for BBMASK. The information included a bit more
syntax information as well as some more complex examples.
I added more reference information to the "Excluding Recipes
From the Build" section to help better describe how the
BBMASK variable works.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: f10f43a543e7b0892863e165d2902741a8823009)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The chunk.quietly option disables the output of the docbook
chunker. Creation of a new html file is now longer printed to the
console. This provides a much cleaner output of the eclipse makefile
target.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The title of the document used to create metadata for output formats
such as eclipse help.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This stylesheet uses the eclipse stylesheets of docbook to create
eclipse help from this documentation. In addition to simple html
files these stylesheets will also create xml files which are
needed to integrate the documentation into eclipse (e.g. toc.xml).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Standard stylesheet parameters were moved to the docbook customization
file tying them to the docbook stylesheet used. Removing these
parameters simplifies the Makefile.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated a couple spots in the manual to be clear on meta
not being a strict requirement for a layer name.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: ffd80ade292a462a77981c8c19bb71a19333a397)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3663
I added wordings to indicate that meta-intel is not required
to create a BSP layer. But, the example presented uses
meta-intel.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 746948cd1d612f0b837e70a7e92e4081d379cb50)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Part of section 5.15.1 incorrectly implies that only copyleft
source will be archived to the specified directory, when in fact
copyleft filtering is disabled by default.
(From yocto-docs rev: 8eacef8acc398bc3d881d657d27c8827f05e3227)
Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example doesn't account for an extra level of directories
that organise the sources by machine type.
(From yocto-docs rev: 844e8b8f28ab765e59fdbee40e00c973b1b00d89)
Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I went through and got rid of all references to the old
YP Kernel Architecture and Use Manual and replaced with
appropriate references to the new YP Linux Kernel
Development Manual.
I also laced in appropriate references into various sections
of the new YP Profiling and Tracing Manual.
Also, updated the list of resource manuals to reflect the
new manual set (addition of kernel-dev and profile-dev and
removal of kernel-manual).
(From yocto-docs rev: ef531ad65c9b749dad5e8e39b060bf1641e4fa38)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the "Terms" section, I enhanced the "Metadata" term to include
a bit about Metadata in the context of the kernel. This type of
metadata is discussed at length in the YP Linux Kernel Development
Manual.
(From yocto-docs rev: c6f48bc4c33850eaa1dbf5867759a19d373766ce)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert P. J. Day suggested adding http://lists.yoctoproject.org/
listinfo to the list of mailing lists, which included yocto,
poky, and yocto-announce.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: f322c60814471e4216e112b193e5769fd6008a79)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Added "Debian" as a distribution for best results.
2. Fixed a link to the Hob page and two links for the
Build Appliance.
3. Three typos fixed and a few grammar items fixed.
(From yocto-docs rev: 0b381094ed9cc2d66895d4ad7c63005c8a918eb1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated a note that points the reader to the maintainers list. The
note in the master branch pointed the reader to a nonexistent (old) file.
(From yocto-docs rev: d947d6d9bd42562a84ad3ac90e4c2052f421119c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3176]
Several places throughout the YP manual set examples are given
for the bblayer.conf file. For release 1.3, a bug existed that
surfaced when a user removed either the meta or meta-yocto
layer from this configuration file. The bug has been fixed and
the ripple effect through the YP documentation set affected
several manuals.
Fixes include updating the code samples that show bblayer.conf
so that they now include the BBLAYERS_NON_REMOVABLE variable,
a new glossary entry for the variable, and an explanation of
both BBLAYER and BBLAYER_NON_REMOVABLE in the section that
talks about the bblayer.conf file.
(From yocto-docs rev: 904b9ec1cd6d823af0e92f6891fc7e434cf2e358)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3445]
Updated the "Installing the Plug-in Using the Latest Source Code"
section for the Eclipse section. This was pretty much out of
whack. I have created new steps that involve running the setup
script and then running the build script. The new information
still needs a review.
(From yocto-docs rev: 5903964a9583c6051abefa4a7b944b59a76825b4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3274]
I have added a new area at the bottom of the current
"Using the Yocto Project in a Team Environment" section.
This section is the spot for addressing what Richard Purdie
coined as "How to use YP in a work group." For now, the
changes are based on the information that Richard placed in
the Bugzilla entry. Presumably we can build on this information.
(From yocto-docs rev: 92c5d1b6ac6b553fab19410170364dca40123c59)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2909]
Applied a few changes based on Paul Eggleton's review
of the section.
(From yocto-docs rev: 54c2b1577ba062e09a8df14767257147e33a939f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2909]
Updated the "Using a Development Shell" in the dev-manual to note
that the OE_TERMINAL variable is the thing that controls what
terminal is spawned. Added a reference into the new
variable description.
In the poky-ref-manual, I created a new glossary description for
the OE_TERMINAL variable.
(From yocto-docs rev: 25001eba312c4109b4aaa79b334d27e144ef0d3f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2909]
Updated the section on using a development shell
(From yocto-docs rev: 37b43dcb19dda747b7e90ac2e393dad29e9d87a5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO_#3366]
Created a new section titled "Handling Optional Module Packaging"
in the dev-manual. This section is based on the wiki page
that Paul Eggleton authored.
Created a new glossary entry for PACKAGES_DYNAMIC in the
poky-ref-manual.
(From yocto-docs rev: 5af3da5e2af15c33e5e6eb7a9ef3ab3c0923284f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO_#3396]
Spaces in file and directory names is an issue for the build
system and throws an error when sourcing the environment
setup script. I added key notes in several areas of the doc
set. I also added some cross-references to the oe-init-build-env
section in some other areas where running the script is discussed.
(From yocto-docs rev: 1d102e91ba77391096749bd7df6c05b2b695b33f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made changes to the poky.ent file to change the three variables
needed to build manuals for 1.4.
Made new entries in the manual revision history tables for the
five manuals that have them. Each entry shows the "TBD" release
coming up.
(From yocto-docs rev: f7f75a238d709698f1582ce22e209c09ee60581b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made minor changes as needed due to some new sections, links,
and capitalization standards.
(From yocto-docs rev: bc966e5a78dadd14ecf1896a36e40a9b256bae77)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the sections on the "Git Workflow" in Chapter 4 and
the "Patching the Kernel" section in Chapter 5 per Tom
Zanussi's review comments. Minor technical changes.
(From yocto-docs rev: fd8a291349c06328adebd37f8a9bbeaa49adb44c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this figure used to be at the end of the development manual.
I have removed it from both figures directories and taken
it out of the TARFILE list in the Makefile.
(From yocto-docs rev: ad8fcfc4bddb6bcee0e1a4ece78cd87ab0d51b6c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Updates to the Git Workflow section based on feedback from
Darren Hart. These changes simplify the flow and make it
generic.
* Updates to the lttng user space tool used from within
Eclipse. The legacy version of the tool is no longer supported
so it had to be edited out of the description and replaced
with the 2.0 version.
(From yocto-docs rev: 81d2b79035fc99f92364bfef2c76076738cbaa52)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Feedback from Paul Eggleton suggested to not use the linked
term "Source Directory" in the last paragraph of this section.
Reasoning being that it is mis-leading in this case. People
reading this will be thinking more along the lines of traditional
source code rather than our establishe "Source Directory" term,
which in the doc set refers to either the unpacked poky tarball
or the cloned poky Git repository.
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: f9bfcdebf85481839df01442ee81c4c9e8ee559a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the release month in all the manual revision history
tables to say "October 2012" from "Sometime in 2012".
(From yocto-docs rev: 1fc9313fe6c69db3d8cece6d940f78a2f0dc8386)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Edits to get the patching the kernel section more sane.
* A tweak to the opening sentence of the compliance section to
rid it of the split-infinitives.
(From yocto-docs rev: 8e2ff293e85a602efd98aceb20da5a2ea5f2a34d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made changes to try and clean up the process.
(From yocto-docs rev: 9c4fbcb473dc594647ba8779162379a745f8f8d6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made some general edits to the new "Patching the Kernel" section.
Also had to remove a couple of images no longer used in the section
from the Makefile "TARFILES" variable.
(From yocto-docs rev: ac61e22e2f89926fbbda56fbaa4384c3c5156360)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the temporary text in the new "Patching the Kernel" section
that was copied from the old appendix A. Fixed the PRINC variable
in the creating a new layer example.
(From yocto-docs rev: 3eba77a81d3460866638a2f2d6b7c27d9dd1a2be)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the "kernel-example-repos-generic.png" file as it describes
the bare clone method for kernel modification. We are removing
that from this manual.
(From yocto-docs rev: c25c4f662c2f8a83fd9b09583646be9dbe01424c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel workflow section was re-written to reflect that the
kernel appendix has been removed. Also, changes to the flow in
general no longer make reference to the bare clone and the copy
of the bare clone as a method used to modify the kernel.
Many links were modified in other manuals as well.
(From yocto-docs rev: 38adbcb00d4305029cfa94e5ef047da41823f021)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The figure that shows the bare clone and the copy of the bare
clone are no longer needed. The description for the kernel
workflow has been reduced to discussing only modification of
the temporary source files. We are no longer talking about
creating a bare clone and copying it as a way to modify the
kernel in this manual. That topic will be described elsewhere.
(From yocto-docs rev: f6a25e5e3763ea7a1f8a81ce377e3b520143b852)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Common Tasks" chapter is better suited as the last chapter in
this manual. So I moved the development workflows up a chapter.
(From yocto-docs rev: 19f0a6411c065388b5bd0083338b164b43baff0e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel example appendix is now gone.
(From yocto-docs rev: d744e76034ff2711a8c40b9bb1982971d28a04b1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel example appendix is being removed. This broke a lot
of links. For now I have moved the information into a new section
called "Patching the Kernel". I have preserved the information
by adding the old appendix file as kerne-appendix-orig.xml.
(From yocto-docs rev: 994235a69362dfb0114ef9001ea7f2f2e2fdc5c3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Eliminated the section A.2, which had an example of how to use
menuconfig in the kerenl example appendix. The information is
now merged into the similar section in Chapter 4 "Common
Tasks." It was decided that the Appendix A examples in the
manual were too detailed for a general development guide.
(From yocto-docs rev: f88ec421b257657f02cc0f132ec2580c17f07cef)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this statement in the linux-yocto-3.4.bbappend file needs to
have the comment removed so the source can be found.
(From yocto-docs rev: 821162221818f5ce53bb903aeef57c85314f5083)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the Kernel example appendix I changed some remaining 3.2
kernel strings to 3.4. Also I added the OE_INIT_FILE variable
from poky.ent for use instead of the "oe-init-build-env" string.
(From yocto-docs rev: 1d9d8d72d197bdd81756eed7fe1529f341de6089)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Each time the kernel revision is bumped (e.g. 3.2 to 3.4)
Some of the figures would be out of date. The reason is they
had pathnames that included the release of the kernel.
For previous YP releases I was adding logic to the Makefile
to be sure to catch the right files dependent on the branch
from which the documents were being built. This scheme is
not scalable so I decided to make the figures generic by
adding a note within the figures explaining the place-holder
"<x.x>" as part of a pathname. Thus, three new figures were
added to the folders directories of the dev-manual and the
mega-manual. Correspondingly, the 'denzil' version of the
figures were deleted.
I modified the Makefile so that if the BRANCH is not edison
or denzil then the generic figure set is used. I have to retain
the logic for both edison and denzil to cover the case where
a user clones or sets up an edison or denzil repo and then
builds out the manuals. Basically, it had to be backwards
compatible for releases prior to danny.
(From yocto-docs rev: 8283eed4b0b9ec164b87db99c35231f8731ac443)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits to the part of the example that sets up for the
first core-image-minimal build. Put in the variable to use
for the build environment setup script, updated some changed
output from some of the commands, etc.
(From yocto-docs rev: 0b4b2ddf9a78a9d6d218ed9a6f0acd3e876d9581)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Danny, the "kernel-example-repo-<release>.png" file changed to
"kernel-example-repo-danny.png". To correctly make the dev-manual
and the mega-manual some things needed to change:
1. New figure created and added to both the dev-manual and the
mega-manuals figures directory.
2. The "kernel-example-repo-denzil.png" files from the dev-manual
and mega-manual figures directory was removed.
3. The Makefile was adjusted so a new BRANCH=danny area now exists
to set TARFILES for both dev-manual and mega-manual.
(From yocto-docs rev: 8b2ff6b657a1486559799e219baaec9fde2e5c6c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a note at the beginning of this appendix that references
the yocto-kernel script as a way to quickly manage kernel patches
and configuration.
(From yocto-docs rev: 35cd7f6a9722120e47ae8b422dd86593497ebf1c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This appendix is antiquated and needed removed. The BSP
development example is now in the BSP guide where it talks
about running the yocto-bsp script.
(From yocto-docs rev: 892ff450d79a7564a72f11eb7510d349ca71d47a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removing the Appendix A (BSP) example had some rippling affects
throughout the doc set. There were several links into the appendix.
All these links had to either be modified (if possible) or simply
removed since the appendix will be removed.
(From yocto-docs rev: fff35abd87e945de1806eef63a56a956d104bf92)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section now points into the BSP Guide where it talks
about using the yocto-bsp script to create a BSP. The prior
method was by hand and described in an appendix (A) of the
YP Development Manual.
FYI - this results in the removal of Appendex A in a future
commit.
(From yocto-docs rev: 5e1c44b1768b79dd1447ea47461b84248bd2111f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The examples were out of date. They did not show the
meta-yocto-bsp layer, which is there now by default.
(From yocto-docs rev: ea2e2e8a259bc3e629fb8087229872b9818a696a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was out of date. I copied in the most recent version
of the bblayers.conf file, which sets LCONF_VERSION to "6" now.
Also, added the meta-yocto-bsp layer to the example.
Additionally, I inserted a Note explaining the consequences of
removing the meta-yocto layer. The note references [YOCTO_#3176]
for more information.
(From yocto-docs rev: 532b72c5c18b2a9a61619164bae6216c91c2ecc9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current setting was changed from "1" to "6".
(From yocto-docs rev: 7f5be4b0b2d1e17add774c7ba3b8803ad770a8fc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the meta-yocto-bsp layer to the example listing in the
"Enabling Your Layer" section.
(From yocto-docs rev: 95fb13a1049ccaffb3531c93a28a3c480ea1a243)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Explain that we test with a set of reference hardware rather than only
supporting hardware that we have (avoiding any implication that the
build system can't support other devices). These are in the
faq entry in the poky-ref-manual for the question of how we can
claim Poky / OpenEmbedded-Core is stable.
* Adjust the language so that it is OE-Core friendly, with a link to
the Development Manual for the definition of OE-Core.
(From yocto-docs rev: 5ff1604dd383b26e918c319fcbe46dd1589cebc5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I edited the patch from Paul a bit here to conform to
the style of writing plus to make things clearer.
(From yocto-docs rev: 87abf857cfcd8a0d78a48322fbe9ac5395b6ad30)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the listing of the final SRCREV statements for the
BSP example.
(From yocto-docs rev: 0d0d5994c2653dda1171eaad226bbe1764a04440)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes are partial for converting the example for BSP
creation from Crown Bay to Fish River Island 2.
(From yocto-docs rev: c7fc78a8453ad363138764aa30e377b56ce49f2b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the reference to the Downloads page.
Also fixed the local branch in the meta-intel example so that
it uses the same name as the local branch created for cloning
poky.
(From yocto-docs rev: edac781b37bce0d0bca6a741186cfa53a512b73e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new branch is named distro plus poky revision
(e.g. danny-8.0). I had just the distro in there.
(From yocto-docs rev: 9490849f7f6dc815d1b676b15b3f38f671a49be8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The term "Source Directory" should be capitalized.
(From yocto-docs rev: 143213545358dd5b6c28c71202bea2e40dbb2522)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the Quilt and Git flow methods there is a bullet that talks
about incrementing the PR variable. I changed the wording to
be in the context of recipes rather than packages.
(From yocto-docs rev: 64f6230251c023e469a346c0425834b950ed5c9b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example that describes changing the source code usees the
P* variables extensively to refer to names of the recipes. The
wording used was antiquated and exclusively referred to
"Packages." I changed to reflect the fact that P* variables
in general are refering the recipes and not the packages.
(From yocto-docs rev: bd3ef1c46fc7a3b0b2ff5ab60dc52e125f080e24)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
some of the links to information for the user-space tools
had become obsolete. Fixed them.
(From yocto-docs rev: 84e72204e34e45d9d8cae876710a46a83b61c0cc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the preferred branch for the Eclipse example from
a hard-coded "1.3_beta" to use the DISTRO_NAME variable.
(From yocto-docs rev: 9393c5d1e44a1e326c73353b090c1d1c1a5833da)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added information in the #4 box to include the cross-dev
toolchain.
(From yocto-docs rev: 198ab4326369d8c74225d9de51bf536621ab2251)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the item that talks about getting the root filesystem.
Realized that the cross-toolchain was not discussed in this
bullet for the case where a user does not use the ADT
Installer. Added text and references to correct that.
(From yocto-docs rev: ec2f5103471f047f7ed7e53cc22789c74ab506ae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added an earlier occurence of the "tm" for Eclipse product.
Also, changed the reference for modifying the kernel to point
into the appendex rather than self-referencing the same section
from where the reference originated.
(From yocto-docs rev: a85840611650c9124b6194acca59c8bfe71f566c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I standardized the use of the term "Source Directory" when
referring to the poky directory as set up on the host.
(From yocto-docs rev: 3eaf7a734a4eecab2be2c8e71bee4d6c2cb7788b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made this more accurate by including notes to edit the
source and use of menuconfig within the diagram.
(From yocto-docs rev: 91d3d2e935aab24c4bd96c5921a605cbbb7e3231)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed to add the 3.4 kernel to the list of linux-yocto-*
kernels as found in the source repository.
(From yocto-docs rev: 98538e2616214f76083697ad3cc886efd183c34e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bulleted item that describes where to look for application
development was still pointing exclusively to the adt-manual.
Updated to point to adt-manual for host setup only and then
point to section in the dev-manual for the Eclipse example.
(From yocto-docs rev: 36ac631e23366c4d9f83c2d00cbbd3bc4758aa15)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Better display of the SELECTED_OPTIMIZATION variable options
when they appear as a list.
Also, some punctuation added.
(From yocto-docs rev: 73777e545f13eacca9ee466ba852bccd84c17f6f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
'sdk', when used in general terms should be capitialized.
(From yocto-docs rev: 1d68746ae197620b533a9ad53e71b16c9e4e42b8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I found other changes for underlying/corresponding wordings
regarding the relationship between .bb and .bbappend filenames.
(From yocto-docs rev: 28f12a4ea97a683281cd8cc0bbceb40d2b896aa4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Better choice of word here is "corresponding" rather than
"underlying".
(From yocto-docs rev: 3d8b6d6e06b81960df2a7d25b6d54308210cc011)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The manual listed an out-dated example listing of meta-* layers
in poky.
(From yocto-docs rev: 39e2a02301d1d0b609fbc041395dd31f6ba9fa2d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The description for where the "scripts" directory lives was not
conforming to our terminology.
(From yocto-docs rev: 925167c446b86ca09d387d01568db64113412311)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For obvious reasons I changed this one :)
(From yocto-docs rev: 5f3203292f46bea799321e4520668252a46fb599)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I improved the wording such that it is not tied to a
x.x type release. It is more generic here and will survive
better under future releases.
(From yocto-docs rev: 2bd644db7fef71cd2f07f6d3dcbd2ba60b83df08)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a line to cd to the poky directory so the example makes
sure the meta-intel directory is created in poky as it states.
(From yocto-docs rev: fdeff0fc2c61c521eaf9d3c48429792f1559c2a4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated so that the repo poky-extras is for sure created inside
the poky repository.
(From yocto-docs rev: b01ea76ded2ade66f2cb19b37d9e9d8d5d2e96c9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
changed the example of what the manual does not provide to
be more appropriate.
(From yocto-docs rev: c4e7712cfd2e13b42f7322ffed6a1f84116df963)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Section A.5.2.3 "Changing recipes-kernel" indicated that the user
needed to look in poky/meta-yocto/recipes-kernel/linux to find
the linux-yocto_3.2.bbappend file to locate correct SRCREV
values. With 3.1, the team split out kernel and BSP stuff
even further by creating a poky/meta-yocto-bsp directory.
The example needs to reference that directory instead.
(From yocto-docs rev: 6e9b0ceb5ad24b1be8399bf5a0a83fdc30129f82)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the section "Using an External SCM." This section was
written so that PN was refering to a package instead of correctly
refering to the recipe.
(From yocto-docs rev: 2bf44cf78bef08d2dd4d9e596100900913777d60)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For 1.3 there is not longer a toolchain tarball. Instead, there
is a wrapper script that lets you install the tarball. This
fundamental usage model change caused several ripples throughout
the documentation set. I have changed wordings and examples
to reflect the new paradigm.
(From yocto-docs rev: afb2069daa91e04c0f78ba425a6b184cb820d888)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The steps for creating a project in Eclipse vary a bit between Juno
and Indigo. These changes reflect that.
(From yocto-docs rev: a020ecde8ed02a29f67498ef1511261d2054f784)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits to test out the lastes version of installing the Yocto Eclipse
plug-in from the latest source. Small changes to be more complete
on the step-by-step process with regard to being in the right
branch. Also, inserted 1.3_beta as the version. This will change
later.
(From yocto-docs rev: 1326916a7d03bdbb0613e6e26a4089b3bd87d204)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I fixed the repo example so that the -b option is right after the
git checkout command and so that the "origin/" string is part of the
example.
(From yocto-docs rev: ba7ed26cf308a69e1ec8cfb0072dd10742af4ac5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Task has been renamed to package group, and there are some minor changes
in how package group recipes should be constructed - in particular the
inherit of packagegroup.bbclass is now highly recommended as it will set
appropriate defaults and automatically add complementary -dev and -dbg
packages.
In addition to Paul's patch, I added a couple <filename>/</filename>
tags around some switch names to be consistent with manual
formatting.
(From yocto-docs rev: 598d18507ace2054f8c8bb5f496557c98f066b5a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The meta-intel BSPs and yocto-bsp tool no longer use a bbappend of
task-core-tools-profile to add systemtap, so these sections should be
removed.
(From yocto-docs rev: cdc12163dd95f0a78cc0f35c03b5eb3d7b1476e3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert P. J. Day pointed out a link in the development manual that
was for the BitBake User Manual. The link resolved to an old,
non-maintained version of BitBake documentation. According to
Richard Purdie, the BitBake docs referenced should be the ones
that ship in the bitbake/doc/manual directory of poky. The
YP docs had been using a variable named BITBAKE_DOCS_URL that
also resolved to the antiquated user manual site. Consequently,
there were many links that needed fixed across both the YP
Development Manual and the YP Reference Manual. Each of these
references now points in general to the bitbake/doc/manual
directory in poky for more information.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 12f77236b602e9ec43e845c8cec060ad342af19c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a note in the "Creating Layers" section noting that to be
Yocto Project compliant, a layer must contain a README file. This
change was prompted by a discussion over the fact between Robert
P. J. Day and Mark Hatle.
(From yocto-docs rev: 2e073763a81125699a2d962031ca29ca64c81595)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the section that describes how to submit a patch through
email while not using the scripts that send patches and request
pulls.
(From yocto-docs rev: 9167b89289134d8d16610cc527d0d71713c0641b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the title and a single reference from the Kernel manual
to a title more representative of how these patches are sent -
not using scripts.
(From yocto-docs rev: ff908c34fae88eab9724891a008142a834f34081)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added text to indicate that using the two scripts for generating
patches and requesting pulls is the preferred method to send
a patch.
(From yocto-docs rev: d6f036a91074dd00c51fe0f937224182fc801b3b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the section heading for the part describing how to
push changes upstream via the poky scripts. Also had to
change one cross-reference to the section in the kernel
manual.
(From yocto-docs rev: be7712aba044238e8781cdf869c5d14e77eb09a2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Every place in the YP documentation suggests setting BB_NUMBER_THREADS
and PARALLEL_MAKE to twice the number of cores as the host machine.
This fixes a single instance in the YP dev manual where it was
suggested that PARELLEL_MAKE be set at 1.5x times the number of
cores.
(From yocto-docs rev: b6b820371cbe43e39425156c72c45df283fdf7d1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed "The" from all the titles of the books. This makes it easier
to reference to them and easier for the automated processing of the
mega-manual.
(From yocto-docs rev: af566d6d007cff642648698ea487a6eeaa8cc930)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I fixed a reference to a manual that should have had "Guide" and
not "Manual"
(From yocto-docs rev: a51de96fe0cd78cb379e6758d7e357c91daa2791)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I fixed several occurences of cross-references to whole manuals where
the formatting was split in the <ulink> statement. The <ulink> tag
and the manual title must be on one DocBook line in order for the
sed scripts to correctly process the links when the mega-manual is
created.
(From yocto-docs rev: 0dee12d518c892f59c0446e1c7b5d0f71b6ee22b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed several references to books. There should be no books referenced
using "The" at the beginning of the manual title. These need to be
"the" in order for correct mega-manual link processing with the
sed script.
(From yocto-docs rev: 76753216c7138d55f7b6f9167d678245ab3134e7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the notes that say "Due to production processes..." at the start of
each manual contain links to manuals. the links needed to be formatted
such that the entire <ulink> code and manual name appeared on the same
line so that the sed script can effectively remove the link in the
resulting mega-manual.
(From yocto-docs rev: 0a41971c331ad1961e6ee1e067b59c36c9f048f6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved "the" outside of the generated HTML link so that the sed
script will process this part of the manual correctly for the
HTML mega-manual.
(From yocto-docs rev: 3bdf7c7dc4478f2a435cbc84a8a815daf7130660)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The references to the YP Development Manual were inconsistant.
These references were fixed.
(From yocto-docs rev: f4ded0b965fcbce7b500ca21886ee9b755c38383)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The way I refered to the YP Quick Start was inconsistant.
I have made edits to remove these.
(From yocto-docs rev: d9487c60db23861e8a9dd2c81ac46d4960abd462)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I had to rename individual style.css sheets to have book-specific
names. So style.css for the ADT manual becomes adt-style.css and
so forth. Turns out, this isn't really necessary for the solution
to create the mega-manual but I am leaving the changes as a
separate commit because it makes sense. It causes no disruption
to making the six YP manuals.
(From yocto-docs rev: 8cbdae1fe86988243f91dfd611c14f8a37007886)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the first sentence of the description of how to use QEMU images
with NFS server. This is feedback from Scott Garman's review.
(From yocto-docs rev: 6a33b1b58bd72756baf57228b7348ff662248012)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2929]
Provided an updated section on how to install and configure the
Eclipse IDE so that it supports both Juno 4.2 and Indigo 3.7.2.
The fix included creating a new poky.ent variable that is
Juno-specific.
(From yocto-docs rev: 6b0b046322420f56feb644eb6de8341dfac59df2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated an old comment in the layers.conf file example to say we
have recipes-* directories instead of the old packages directory.
(From yocto-docs rev: c39394e848d6039e6728b7e53de86958f951e258)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two areas of the manual updated to reflect the fact that not all
QEMU images have an SSH server in them.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: a173d8cb05ee695b02188a037ee047db016c6a67)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The detailed chapter that describes how to install and configure
the Eclipse Yocto Plug-in has been moved to become a subsection of
the "Workflow" chapter in the YP Development Manual. This commit
accomplished the bulk move, edits to integrate the information,
and fixes to all cross-references. Moving the chapter creates a
sectioning issue in the YP Development manual that results in
subsections that are six levels deep. Not ideal. Will look at
fixing these with a subsequent commit.
(From yocto-docs rev: e6abff8f578f2cf6997895260f607395281ae8e8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The name of the ADT manual has changed to the "Yocto Project
Application Developer's Guide." This change had some ripple effect
regarding cross-references into the manual. These are now fixed.
(From yocto-docs rev: 7ba25c470b03a85098388e6cca7c78a6ebb245d8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In preparation for taking the Eclipse installation and configuration steps,
I have made an edit pass through the section "Workflow Using the
ADT and Eclipse". Minor edits performed to integrate the new
information.
(From yocto-docs rev: 7b4e0ae371b23f329451ac768b7d9eab5931df2d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the creation of a new KMACHINE glossary item, there were two
areas in the YP doc set that reference the variable. I added
cross-reference tags. Also noted that some other references
were missing to the variable COMPATIBLE_MACHINE.
(From yocto-docs rev: f740b62be175a50f17ce8a244258dcf391fcf672)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have updated both the section for configuration fragments found
in the BSP and dev manuals.
Reported-by: James Abernathy <jabernathy@gmail.com>
(From yocto-docs rev: 62f4df751c80e7b749356bb80ade3a7847411f7c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Caught and fixed a stray reference to "appendix" that should be
"chapter."
(From yocto-docs rev: 97d26495dd9b561bb5724a86e9cd777eeef9f71a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of moving the reference manual to a real reference manual I
am removing the "appendix" classification and having everthing be
a chapter. I changed the "ref-varibales-gloss" appendix to a chapter and
made sure any references in the doc set use the proper term now
(chapter).
(From yocto-docs rev: 3f541c20c7aff1012eb4c06cb856bf9795124822)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of moving the reference manual to a real reference manual I
am removing the "appendix" classification and having everthing be
a chapter. I changed the "ref-imagese" and "ref-features" appendices
to chapters and made any references in the doc set use the proper
term now (chapter).
(From yocto-docs rev: 08117634034a5cd5567c971957583d986c9ee9a4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: ddee80872afc567b9381387980f257b337f29ea1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the section "Using an External SCM" to the "Common Tasks"
chapter. This information was formerly in the YP Reference Manual
in the old development chapter.
(From yocto-docs rev: d34cd9e86cb7a6b27cf6a5b4daf58c445dd86331)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I inserted the section "Using a Development Shell" into the "Common
Development Models" chapter. This information was formerly in the
YP Reference Manual and is being moved out to help the ref manual
become a truer reference manual.
(From yocto-docs rev: f4ca1c567afcebbae119f21c147e3c38c7ffd54e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO_#2671]
Added a bit more in here about considering requesting rights to have
a contrib area to YP and OE if user is a regular and significant
contributor.
(From yocto-docs rev: b54bba33b2706bed593a9ee66d5c72f820c37d32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section that describes how to send a patch upstream via email
did not have a good connection to the various mailing lists. I
added some references to this section and also mentioned using
the scripts if the user has many changes to commit.
(From yocto-docs rev: ad75ae45420c43bda974d22b02094237b5c7cc50)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bug 2256 is now fixed in master and the fix will be in the next release,
so update the documentation accordingly.
(From yocto-docs rev: 877a7ecfd1623417d0793a5dd16b66c35b6fdbae)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"shared state cache" is the generally accepted term for this.
(From yocto-docs rev: a15f629afe46e7217182a1ac077ab59641be9a8c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's CONFIG_SMP here, and since the title of the section already
mentions it, just change the sentence to be more generic.
(From yocto-docs rev: 32e6145b5f41d4eb293f8267ef01d02217143152)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Change some of the language and patch submission directions to
correctly represent how we work together with OpenEmbedded (this
changed with the introduction of OE-Core a few releases ago).
* Correct --help option to -h for pull request scripts
* Clarify commit message guidelines
* Touch up a few other bits and pieces
Fixes [YOCTO #2671].
(From yocto-docs rev: 3170ce5e0757951afee13207c117316e33449b39)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Throughout the manual, the kernels that are built and available through
the Yocto Project were being referenced as a "Linux Yocto kernel."
This reference is poor. First, it placed Linux and Yocto very close
together and could upset the Linux folks. Second, a better way would
have been to say "Yocto Linux kernel." I have fixed by referring to
kernels that are available through the Yocto Project as
"Yocto Project kernels."
(From yocto-docs rev: 9b8319328cd4ab4ce3363001c9feeec585d9cab9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have replaced the term "Yocto Project" with more appropriate terms
where possible.
(From yocto-docs rev: 622ef9a2b4897ecd151b641b43d7706ab673c989)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scrubbed the manual for the term "Yocto Project", which has been
over-used. I updated occurrances to better represent actual bits
rather than generically referring to everything as Yocto Project.
(From yocto-docs rev: f70cffeffa0d8863a88783607621bf6f7125d02d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example did not specify to switch to the "denzil" branch after
establishing the local repo of poky-extras. The example will not
work without this step.
(From yocto-docs rev: 90071570bca2edfceb4adb91bdd9093c095c8825)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previous renditions of the term "Build Appliance" referred to the
VMware system. However, it was determined that the term
"Build Appliance" should really refer to the actual image that
can be booted and run on the VMware applications. I have updated
the areas affected by this change. The change assumes the name of
the built or downloaded file you boot will be named
"build-appliance-image."
Fixes [YOCTO_#2656]
(From yocto-docs rev: 6b27b7d92b9722351eb43a7c2a341ce3af056dba)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor typoes in first couple chapters
(From yocto-docs rev: 36618cc6a261a994b00c5c524c76cbf3952a2eae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved the sections on remote debugging and using the profile out of
the YP Reference Manual and into the YP Development Manual. These are
now two sections in the "Common Tasks" chapter.
(From yocto-docs rev: 42640bf69aa05c56eb112c10b6d7b96069173785)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section "Modifying Temporary Source Code" that was in the chapter
for "Common Tasks" was moved to the "Common Development Models" chapter.
After discussion with Darren Hart, modifying temporary source code
is a valid develop model. So, rather than isolate it in the common
tasks chapter it has been placed in the development model chapter,
which now has four types of development.
Changes were made to update the introductory text of all the concerned
areas of the manual.
(From yocto-docs rev: 8b07ee3bcda9c13e576b54b0079b0656cd8fcc32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Using Pre-Built Binaries and QUME" section needed to incorporate
some information from the YP Reference Manual. I have merged those
changes in and did some re-writing to blend it well.
(From yocto-docs rev: 5c20f00f9ec75c19fd0106c9f241751381ba7e3c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed two larges sections of old comments.
(From yocto-docs rev: df1b08b621f2b449c7575b86ec90c40f1606c43d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated a note to include information about what happens if you do a
kernel build and have your machine compatible with every possible
kernel. This extra information is useful for rational.
Reported-by: Bruce Ashfield <bruce.ashfield@windriver.com>
(From yocto-docs rev: e631ec44be49d456add6a53ff3db89016d187370)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The linux-yocto_3.2.bbappend example was out of date. There is no
longer a kernel features statement in the last part of the section.
Only COMPATIBLE_MACHINE, KMACHINE, and KBRANCH remain. I removed
the fourth one from the text description and the example code.
(From yocto-docs rev: 1a6d3cad48f1b52e5b029434ce655940c6024694)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a note telling the user that the commit ID strings in the
example might not match the actual commit ID strings found in
the .bbappend file.
(From yocto-docs rev: 5cb845361c8ce8b60dcafc28d1bc01d54badd67a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to a bug (2256) the example that changes the kernel configuration
through menuconfig did not work. I have re-written the section
to now start with the default behavior of CONFIG_SMP=y and then
have the user change the configuration to where it is not set.
The changes include the reversing of the flow and the work-around
needed due to bug 2256.
(From yocto-docs rev: 6fa9eee12ed83f81470beb9792fb4fc1c5104f69)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added entries for the Manual History table for upcoming 1.3 docs.
(From yocto-docs rev: 430b384035593cd05c4f286e20c01f0fe72da8ec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example that compliles the altered code will not run now when the
KMACHINE statement is in the linux-yocto_3.2.bbappend file. I have
commented it out of the book.
(From yocto-docs rev: 3f67b34daf1ad598b4d07f5e2a60d8c63da754b2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The KSRC example needs "_3_2" at the end of the variable.
(From yocto-docs rev: e6bcbe8504f72777a03e9b08de95d5e2741700a3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Turns out the KSRC_linux_yocto ?= /home/scottrif/linux-yocto-3.2.git
statement in the linux-yocto_3.2.bbappend file in poky-extras needs
quote characters around the pathname. I updated the example
statement.
(From yocto-docs rev: eac1b53c04398152b41ac280fdc030615c165112)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found two instances of "yocto/standard/common-pc/base". this should
now be "standard/default/common-pc/base".
(From yocto-docs rev: a2f4ac3885de1157e6d718cfea9b29a67c76aeb0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel used for example is no linux-yocto_3.2. I changed
all occurences of yocto_3.0 over to yocto_3.2
(From yocto-docs rev: 7ee8f86fd0f44197901c851a16c58aa5f6851b1f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example code with the printk statements needed to be altered.
And the wording supporting the example was modifyied to be more
generic.
(From yocto-docs rev: f76465e920c3959230196814f17890065c613730)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Looks like calibrate_delay(void) changed in the example. Updated
to the most recent code.
(From yocto-docs rev: f1abcbf730c4b50ceb925e41181429c04eb2d55e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the example sets up the bare clone. The shell output changed
because the upstream repo changed to
"origin/standard/default/common-pc/base".
(From yocto-docs rev: cc3a8dde7b7f70174225ec95303d0280697d674b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New image needed for Denzil. I created a new file named
"kernel-example-repos-denzil.png" and copied it to the
Figures folder. I also deleted the
"kernel-example-repos.png" image.
(From yocto-docs rev: 97105187735c15e452580a0174897517c1860f2c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the "Building and Booting the Image" section there is an example
.hddimg file. I updated the file to be the actual file used during
the BSP example build.
(From yocto-docs rev: 165feb4d501a2ed984b742ea9f10e6c2037972da)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For 1.2 you evidently need to add $HOME/poky/meta-intel to your
bblayers.conf file.
(From yocto-docs rev: d5565d9aa14590622373996a037cc16d34e9107f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wording for linux-yocto_3.2.bbappend file updated to support the
addition o fhte KBRANCH variable.
(From yocto-docs rev: 267d7dffc05dc495dbd27b6435bea7ba48cd4cfa)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
edited it to now include the PREFERRED_VERSION variable.
(From yocto-docs rev: 72d8f7bfcad0fff191c998f90369499a78d62696)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section on changing recipes-kernel was way out of date.
I updated all relavent changes.
(From yocto-docs rev: 91538864e6da8c4d0a495e52feafe01ce7afea9d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kernel used in now 3.2 and not 3.0.
(From yocto-docs rev: 974cb0c3665a2767a04ab6261692e93cc2f9200b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The layer.conf file now uses a LAYERDEPENDS variable. I added that
to the example.
(From yocto-docs rev: 237eb7ba897479935ac4c3165ce2cb350143a1e3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel in mymachine.conf had to be changed from 3.0 to 3.2
(From yocto-docs rev: cd94a4d45a062e9282de15dfda25983c500c0548)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The output for creating and switching to the denzil branch
for meta-intel needed updated.
(From yocto-docs rev: ad29c8f73ab3cec930f21939744cff322b43dfdc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The variable substitution had to be changed from
"&DISTRO_NAME;-6.0.0.tar.bz2" to "&DISTRO_NAME;-&POKYVERSION;.tar.bz2".
(From yocto-docs rev: 258b4c7fb46d2e6fb2da7bf2f59cd4f5c035b15b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created a link to the Yocto Project Files term.
(From yocto-docs rev: 9d92248cb5dd862095e815c008e1f47e7518856a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to remove "poky-" from the front of this variable that resolves
to a YP Files top-level name from the tarball.
(From yocto-docs rev: a9ccf2bec4f2f916e854d10aa992f0c45eb0ed3f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Throughout the documentation set I have refered to the YP build
system generically in order to avoid use of the "Poky" term. Richard
has suggested that we refer to the actual thing that does the building.
So I have added BitBake to this particular sentence to refer to the
tool.
(From yocto-docs rev: eaed76bbf97bd34205eace952a1efbc600890815)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This file was replaced by a release-specific file named
"kernel-overview-3-denzil.
(From yocto-docs rev: 85220f16ce10086372f9d81c61cb4e3eb40d52e4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dev-manual/dev-manual-model.xml: The Bare Clone and Copy of the Bare
Clone figures are out of date for denzil. These needed to be
re-done so they use "linux-yocto-3.2.git" and "my-linux-yocto-3.0-work"
as the root names. This presents a Makefile issue when making the
denzil and pre-denzil versions of the manuals. Whenever you use a
different figure for a different release, you need to involve the
BRANCH variable in the Makefile. This is necessary because you are
using different figures in the generated tarballs. The set of figures
could be unique to the release. The outdated figure is
"kernel-overview-3.png" and will eventually be removed (later commit).
I created a new figure named "kernel-overview-3-denzil.png" and used
that in the dev-manual-model.xml file.
documentation/Makefile: I updated the Makefile to test for a
"denzil" release build and if so include the new file in the
generated tarball. This commit adds the new .PNG file as well.
Fixed the Makefile so that if you don't supply a BRANCH value, it
uses the latest figures (denzil).
(From yocto-docs rev: b3550d7640343cd5459efb04c591b81a1e41bc1b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the Note wording to work with the list and not be specific
to a number of supported kernels.
(From yocto-docs rev: 04b941264c001fc2f8e105637436b8d95a770357)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The list specifically named four kernels supported. I changed it so
it would say "several kernels".
(From yocto-docs rev: 8134eae4bce85e18a4402606e2cac6cb422cf0cf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Several things out-of-date for step five of the BSP Creation overview.
(From yocto-docs rev: 6bf1c93315c2fe604dbe468a29d9e2159bf7aceb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The link and wording to the YP Downloads page on the website was
wrong. Fixed it up.
(From yocto-docs rev: 191856e4441bcea078868d22d019f4f1cdd62512)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added more detail to the pathname for the example
formfactor_0.0.bbappend file.
(From yocto-docs rev: 4bd9ac9f189689ddb8806c750545223e1e55cd4b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed a reference to Yocto Project Files and provided a link.
Put in an updated version of the meta/recipes-bsp/formfactor/
formfactor_0.0.bb file in the example.
(From yocto-docs rev: 031113db6d67beaee2e4f8225c7d4d2bc9380b05)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated various shell output examples created from cloning various
Git repositories, etc.
(From yocto-docs rev: 76024b2648c383bf19e6fee81d54c6a992e8d593)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the shell output example when user creates a bare clone
of kernel. We use linux-yocto-3.2 here.
(From yocto-docs rev: 69e3aa7a42d03cff23379432f5d1b496157d5c0d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example that creates a local branch based on a release tag
in the "Repositories, Tags, and Branches" section was not optimal.
Darren Hart informed me that naming a local branch the same name
as a tag confuses Git. Plus, the "-b" option was mis-placed.
Renamed the local branch to have "my-" in front of it and moved
the "-b" option earlier in the command.
(From yocto-docs rev: 29f4ea267ef687431e09eca4634fcb6cc48a6f81)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example in the "Repositories, Tags, and Branches" section that
creates a local branch that tracks the upstream branch is incorrect.
The syntax should be "git checkout -b &DISTRO_NAME; origin/&DISTRO_NAME;
Fixed it.
(From yocto-docs rev: ec80d43ad97370771c9cd7f7e6a4637db5f80e9b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added Hob and Build Appliance to the list of other stuff the user
might want to reference.
(From yocto-docs rev: 4c94654e53e422e5e0a54476e3ca88e682f177af)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Better wording for the role of BitBake. Updated shell output for
the clone of poky.
(From yocto-docs rev: eab184de2bd2b22def9dbe0c93b153ec9334402b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As suggested by Paul Eggleton and Richard Purdie, the example that
describes another method for creating a cusomt image was modified
so that it is based on an existing recipe instead of requiring a
new image.
Reported-by: Paul Eggleton <paul.eggleton@linux.intel.com>
(From yocto-docs rev: 65287ca135422a588d799143d93ccd4d058684ff)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After some discussion from Song and Richard, the dates in the
manual revision table has been updated to "April 2012" for the
1.2 release.
(From yocto-docs rev: b3fc2ec7c5aedb8ea0a2d502bdcd7e8f4092ed96)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I did a quick and dirty scrub over the manuals for the strings
"1.1" and "edison". I found some instances that were not properly
variablized. Also, discovered some references to the
linux-yocto-3.0-1.1.x. All but one instance of this needed changed
to linux-yocto-3.2.
(From yocto-docs rev: 620fb4b7626defcefc8a039de09ae4599ee7f454)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Five tables updated for the five manuals that have the tables.
Used "May 2012" as the date.
(From yocto-docs rev: 0d4d46ba300c07ff9c73186506be5b409bef9d1b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
kernel26 is now obsolete so remove mention of it from the docs.
Removed from docs.
(From yocto-docs rev: 7b9da106d746192f802095584b04e3ee8347eabd)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A reference to meta/recipes-sato/tasks/task-poky.bb is made as a good
example of a task; however, this file / recipe doesn't exist. I
replaced it with meta/recipes-core/tasks/task-core-boot.bb, which I
think is a both useful and basic example to consider.
(From yocto-docs rev: 977877efa7781dd00c53cfa914dd710de7d934a1)
Signed-off-by: Robert Cochran <yocto@mindchasers.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1980].
Changed MULTILIB_IMAGE_INSTALL to IMAGE_INSTALL in the multilib
example. This variable is no longer used.
Reported-by: Matthew McClintock <msm@freescale.com>
(From yocto-docs rev: dfcbecf945b19e559b39b5824dc6b8bb37c18702)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Example corrected.
(From yocto-docs rev: 844ffad1e3b998d62ea7c10273785d710dc3541e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1888]
Per Darren Hart I swapped in the real example and added some text
explaining what the user needs to do if their source is from a
tarball.
Reported-by: Darren Hart <darren.hart@intel.com>
(From yocto-docs rev: a1991f0b6f32a0a296ae4d115a834ed61042720b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed title pre Richard.
Reported-by: Richard Purdie <richard.purdie@intel.com>
(From yocto-docs rev: 2ec1368c4bdf5d61e3a7d60d3293ba878939321d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some edits to the text of this moved section.
(From yocto-docs rev: 69ba05bbdc8a6fb74efdfbb3214a562e564f5a68)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Per Richard Purdie's suggestion, I moved the discussion on using
BBMASK out from the "Customizing Images" section and placed it into
a section of its own titled "Excluding Packages from the Build."
(From yocto-docs rev: edb01b30779117f92e710b8afefa9a5d8a3e78fa)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Placed the "Customizing Images" section in front of the
"Adding a Package" section.
Reported-by: Rudolf Streif <rstreif@linuxfoundation.org>
(From yocto-docs rev: 68a7ef421b9b66cc7f0a2180c1ef17c8c4ec2ed4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There needed to be an entry in all the manual history tables
that indicated this version of the manual is for 1.2 but is
WIP.
Reported-by: Rudolf Streif <rudolf.streif@linux.com>
(From yocto-docs rev: 6792b88af4f0171cfc84e4d77bda871d4af3d36c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Old link to POKY_EXTRA_INSTALL. I changed to
CORE_IMAGE_EXTRA_INSTALL.
(From yocto-docs rev: 8c8308025443e2fd061faa03fe4f6245c58603a5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added information about Hob to the introduction part of this
chapter. The chapter is going to have a section that introduces
and speaks a bit about the Hob.
(From yocto-docs rev: dd98b3132ff4660397c37a223af8c4c2835a5276)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added more information to the YP Term "Append Files."
(From yocto-docs rev: e1a7e9b0a790d394e237a0972140107d11178408)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Put in a link to reference another example of using a .bbappend
file.
(From yocto-docs rev: b5a5433506adfe46276584e51dc19fc153ea098d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed text that described how a config file was referenced.
(From yocto-docs rev: 29846fcb4fd6f90452023e1f627ef76f1a056ac6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits to better describe what a .bbappend file is.
(From yocto-docs rev: 81527358615c229a9161568a30785221c9f081ff)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided a clearer full name for .bbappend files.
(From yocto-docs rev: 4ee07af442c26aa06a6b295df758f41838b407df)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits to the BSP Guide, the Development Manual, and the
Kernel Manual to address [YOCTO #1717], which noted confusion
over the kernel manual when a user was trying to find kernel
configuration information.
The fix for this bug involved several areas. I had previously
created a new section called "Kernel Configuration" in the kernel
manual and "Configuring the Kernel" in the YP Development manual.
There were several rounds of feedback from Bruce Ashfield.
This commit represents the final touches on the three manuals to
address the bug.
Fixes [YOCTO #1717]
(From yocto-docs rev: de8f85753ad1d6dde66adb6bb4cb09e9528c7cd6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Layer section review comments from Paul Eggleton added.
(From yocto-docs rev: a536fe1635dbe9157e86995e7a78568e41a75957)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implemented Paul Eggleton's review comments for the "Understanding
and Using Layers" section.
(From yocto-docs rev: ec376754f63122a1bd31d47e153ee3e872aac0b5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I converted the hard links to use the variables as established
in the file poky.ent.
Also, Cleaned up some bad text in the term "Yocto Project Files."
Looks like a cut-and-paste problem.
(From yocto-docs rev: e2e20bf4895d80dae73595e93132f37fb31121d1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section describing how to set up meta-intel has been re-written
to provide more information about this Git repository and why
it is important. Also, added information explaining why user
should use the same set up method (tarball or Git repo) as used
to set up the YP files tree.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 53fbfc59f0183a6b8474ed643302faffef79356b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied the review comments from Paul Eggleton for the new section
on "Understanding and Using Layers."
(From yocto-docs rev: 6bf5854dd355afdbc01c4c4fb94a4062bd9eae20)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a bit more information to the wording where it talks about
creating a Git Repository if you are going to contribute back
into YP. This change was suggested by Robert P. J. Day and
was submitted to me in the form of a patch. For reasons unknown
to me the patch Hunk failed even though I believe I had things
saved and applied correctly. I had to resort to applying it by
hand. I ended up doing a bit of re-writing on the suggested
change to clean it up.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 94f90c91e6b1d13bebc7a434210452f222ef0317)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Several topics in the "Common Tasks" chapter really fit better in
the "Newbie" chapter. I moved these sections out. I also combined
information from the section on submitting changes from the
"Common Tasks" and the "Newbie" chapter to live in the "Newbie"
chapter only.
(From yocto-docs rev: 90fa8c125e545c57a5a994dd59715b73c5c4882f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed redundant link to manual.
(From yocto-docs rev: 7e7bc327237cae2be3c67e5b711548a16c4d8648)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new section on managing layers. This is a sub-section that
completes the new layers section.
(From yocto-docs rev: 551f36a75485d0b3ecbd69d94fc359cfa42c875d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The change to the dev-manual-newbie.xml file was minor. I added
a link anchor for the term "metadata."
The change to the dev-manual-common-tasks.xml was extensive. I have
added an entirely new section on layers called "Understanding and
Using Layers." The new material has several sub-sections.
Information was based on emails from Paul Eggleton.
(From yocto-docs rev: 4fb34abd60180fc2482ddb9f62e476763cee7679)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I renamed the "BitBake Layers" section in the YP Development
Manual to "Understanding and Creating Layers." Renaming the
section broke three cross-references in the YP documentation
manual set. I applied fixes to the references.
(From yocto-docs rev: 93f4f5dfb61ed48047a40f5bbbc3f5e844c7c2f4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "BitBake Layers" section was grossly mis-positioned. It appeared
in the "Making and Maintaining Changes" section. I have moved the
layer section to the very front of this chapter. It is fundamental
to know about layers and how to create your own custom layers.
(From yocto-docs rev: 410154f6e0a1e1f3ebc05d3f45ed2ce6f71cc618)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new section on building from an external source tree.
This addition was driven by a need through two community members
whose feedback was picked up by Darren.
Reported-by: Inaky Perez-Gonzales <inaky.perez-gonzales@intel.com>
Reported-by: Mohamed Abbas <mohamed.abbas@intel.com>
(From yocto-docs rev: c9548803f58e5055d6686dbc16c94308296ccf2a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a reference anchor to the spot in the dev-manual for the
"Yocto Project Source Repositories".
Other changes were to the bsp guide and were general edits to the
"Linux Kernel Configuration" section.
(From yocto-docs rev: def35923199d48c879ff06a68f81b5cd28d55185)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated all the CSS style sheets so that the Note, Warning, Tips,
Caution, etc. boxes are not so prominant.
(From yocto-docs rev: 451568553e9620c1e247c2f67b0665b184c3300b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Throughout the manual there is a specific term to refer to the
YP build directory: "Yocto Project Build Directory." This term
was being loosely referred to and was not consisten in linking to
the actual term definition in the Terms chapter. All this is
fixed.
(From yocto-docs rev: 9229a512a62780a0e52089cc865d0903cbe7c92e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
changed bblayer.conf to conf/bblayer.conf and also correctly referred
to the Yocto Project Build Directory.
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: 64dffc2a4e587f198d44b0ed0cea269bfa16d3be)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to back off a bit on the use of the term "working directory".
Paul clarified that it was okay to use the term "temporary source code
location" when talking about where the source code for a package was
located.
(From yocto-docs rev: 8d3f7613f32f1ce91c9d53e2db3c36448abb5a82)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implemented Paul Eggleton's latest set of review comments to the
"Modifying Temporary Source Code" section.
(From yocto-docs rev: cd43c642308ba7c049e6ba79befa471673c078e7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
More edits to the "Finding the Temporary Source Code" section as
pointed out by Paul Eggleton.
(From yocto-docs rev: 2987abe413687e216c4fe38d1db855409a595dab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied Paul Eggleton's review comments. Basically trying to clarify
what is the S variable and what is the WORKDIR variable when
determining where unpacked source files are.
(From yocto-docs rev: e139e441653fa00309de204b7ad9f5a7ad7bdcb8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Put in the real link to the YP Source repositories instead of a
click "here" thing. Put in a reference to the BSP Layer section
from the term layer. Fixed a grammar type.
(From yocto-docs rev: 6b3b63480f948dad2c5101deedb8deafad291728)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added some text to explain where the meta-intel repo can be
found within the YP source repositories. Also provided a link
back to the start of the BSP Guide.
(From yocto-docs rev: 79d513d010637e4a684da64b363ed8d957f06640)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added text so the user could locate the poky-extras Git Repository
within the YP Source Repositories.
(From yocto-docs rev: 3778a768ae30e323be0e84b55778040ebe89a3ad)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a reference into the YP Source Repositories so the user knows
where our supported Linux Yocto Kernels are. Also, corrected a
mistake in the working about copying the bare clone.
(From yocto-docs rev: 76f3d59dd9e0b30644415f33158d71ec6932fb4f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added some clarity on where the poky Git repository comes from
with regard to the YP source repositories.
(From yocto-docs rev: 29c0b095daa39256b69cd35f744136d97a239cc3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton's review comments on the "Modifying Temporary Source
Code" section have been applied.
(From yocto-docs rev: 8f17f9e556e7027d8aba1fe69d614d17cdbcc054)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Complete re-write to the "Modifying Temporary Source Code" section,
Section 4.4. This strategy now comprises telling the user where
this temporary source code is, how to change it within a Quilt
workflow, and how to change it within a Git workflow.
I consulted with Paul Eggleton quite a bit to come to this conclusion
that the section needed more attention.
(From yocto-docs rev: 8c6c80121c1eeb1ec6f79e1efb6aa27aa9fd111f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some edits of Paul Eggleton's.
(From yocto-docs rev: ef5a82d429480c3820db93f0b7207d7e470454af)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I combined the section on changing package source code and
the section on changing package source code with quilt into one
over-arching section named "Modifying Package Source Code."
The section on Quilt was sort of a stand-alone section but Paul
Eggleton suggested that it is a natural follow-on. So I put the
two sections in as sub-sections.
(From yocto-docs rev: ae4d3cf99e27f74b151939d2f5a2b440b91ac6d6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied the review comments from both Paul Eggleton and Joshua
Lock for the "Modifying Package Source Code" section.
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
Reported-by: Joshua Lock <joshual.lock@intel.com>
(From yocto-docs rev: 276c13517c7edda8407fdf82c36d14029c5fcee4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created a new section called "Configuring the Kernel." This is the
how-to counterpart for the concepts part created in the kernel
manual. The section consists of three sub-sections:
"Using menuconfig", "Creating Config Fragments", and
"Fine-tuning the Kernel Configuration File." Primary source for
information on this section was Bruce Ashfield. He has this section
for review.
(From yocto-docs rev: 3ac718bc69b4914c41a0bb94134c085964ee71a7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I beefed up the definition for the term "Yocto Project Build
Directory." I included the TOPDIR role and also expanded the
discussion on how it is created and the control the user has
over it.
(From yocto-docs rev: d00f30708ccd5fb9e1fc3c8e5240e0ab7a892fe0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Re-write of the section describing how to update package source
code. I added some rationale to the process and provided more
detail regarding where to find the source files and the naming
scheme behind it. The new section is on review so changes could
occur.
(From yocto-docs rev: 2a1d37a87abb82c66a0ad3fc39d5da9f2f5b1b7e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Last edits to the "Git" section and the bulleted item that defines
the term "Yocto Project Files." These edits were from a review of
Joshua Lock.
Reported-by: Joshua Lock <joshua.lock@intel.com>
(From yocto-docs rev: 57cbb06aac566e02bb2e2a1ad05c3ff6dbb0359c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added "tasks" to the bullet item that says the manual describes
common development models. Now with the "Common Tasks" chapter
in here the intro needed tweaked.
(From yocto-docs rev: 8faa6308dbee2138f404d18c6d384b9af7bad5cb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Broken link fixed.
(From yocto-docs rev: 6c9102ed8651ab93de46781dede05b2312d102d7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made another pass through the document and cleaned up some
mistakes and also removed redundant links to manuals where I had
already provided a link to the specific section.
(From yocto-docs rev: 5da8ffe100127f5fe4bfd2b478f177d6bef3a968)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moving the "Common Tasks" section from the YP Reference Manual into
the YP Development Manual upset a bunch of links. I have corrected
these links.
(From yocto-docs rev: 69ee73c59958aaab6f6370231c65300d1d8c92f8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated dev-manual.xml to include the new common tasks file
'dev-manual-common-tasks.xml' and updated poky-ref-manual.xml
to not have the file 'extended.xml'. This reflects the new
chapter swap between the YP reference manual and the YP
development manual.
(From yocto-docs rev: 978e3be4f20b0a95cf124ce1a9136016a3e71da1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
