The section that describes how to create a patch and send it via
email is really an ordered procedure. I recast the list of steps
using numbers instead of bullets.
(From yocto-docs rev: c2d2256ca6d8c8b837bae87a5bd8a3118553935c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The YP doc set was using a link to an out-dated video that
showed how to configure and run Eclipse. The video was very
old and Jessica suggested just removing it. So, I replaced
all occurrences of the link to the up-to-date appendix in the
SDK manual that provides information on the latest supported
version of the Eclipse IDE.
(From yocto-docs rev: b4af1a79078352df5558e20c0b9cfa97fa141abc)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The link to the section on how to set up Eclipse had been broken
for a while. I fixed the link so that it goes to the appropriate
section (appendix) in the SDK manual.
(From yocto-docs rev: 873c2c53f661b18936595068d75b954e07774621)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated poky.ent to use 2.4 variables and numbering
Updated mega-manual.sed to use "2.4" string for links
Updated all manual revision tables to use "2.4" and
"Usually October, 2017" string.
(From yocto-docs rev: 17ec7da6ab3fd450c2010812f7ad689288b12dcc)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This should be "gdbserver" when referred to generically.
(From yocto-docs rev: 83b2be50e34b0c07cce1f27b55e595752b80b3ea)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These depend on context. In general, "DNF" is the preferred
terminology unless directly referring to an application or such.
(From yocto-docs rev: 29012a8f8e21b964e1ea6d32841dffa8dae7df9f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10995]
I implemented various wording changes based on feedback from the
review. One section title changes so some links in the ref-manual
and the dev-manual needed updating as well.
(From yocto-docs rev: 43a35a311a006d47db50602822e44ab431ca3e43)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes covered several areas. Version 2.3 of the YP now supports
recipe-specific sysroots and is not limited to machine-specific
as was prior releases. Manual changes were as follows:
dev-manual: "Sharing Files Between Recipes" - Wordings were changed
to support the new functionality.
ref-manual: do_prepare_recipe_sysroot task added to the list of
tasks described in "Configuration and Compilation".
ref-manual: Extensive re-write of the "staging.bbclass" section.
ref-manual: Added a section to the build structure for
build/tmp/work/tunearch/recipename/version/. This section breaks
down the recipe-specific subdirectories used to create (stage)
the sysroot.
ref-manual: New section (entry) for the do_prepare_recipe_sysroot
task in the task chapter.
ref-manual: Added a variable glossary description for the
SSTATE_SCAN_FILES variable.
In addition to these changes, I sprinkled in a liberal amount
of cross-referencing for the readers pleasure.
(From yocto-docs rev: 3a8ca96861f4c5d3badb91d0cdc5a3df513d4e59)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10995]
I applied some revisions to the related sections for incrementing
a binary package version and revision sections. Mainly clarified
terminology and pulled the sections into one single section head.
I also cleaned up referencing to all these sections throughout the
YP manual set (i.e. the ref-manual).
(From yocto-docs rev: 7deda18dd496cc383c5de71a10f2b11b1ca0688f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10995]
For the dev-manual, I added a new section on incrementing package
revision numbers that explains how the build system uses various
variables to create linearly numbered revisions for packages.
For the ref-manual, I cross-referenced into the new section from the
AUTOSRC and SRCREV variables.
(From yocto-docs rev: 53c3092e0f0293f4db0a88659abb4cf1c93f208c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8596]
Added a new section to describe the right way to use headers to
interface to a device or custom Linux kernel API. Too often a
user wants to modify the libc header file, which absolutely wrong.
This new section provides some guidance.
(From yocto-docs rev: 960c49bf6446398a9efb2d018d09d63b49e97196)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11274]
When a post-installation or pre-installation script uses tools that
have dependencies, you need to specify the tools using the new
PACKAGE_WRITE_DEPS variable. I added this information at the end
of the "Post Installtion Scripts" section in the dev-manual.
I also added a new variable entry for the PACKAGE_WRITE_DEPS variable
in the glossary.
(From yocto-docs rev: 4d130b63cba5ebabd4af52b62421d387a4b54353)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10887]
I placed a small paragraph at the end of the introduction to the
"Performing Automated Runtime Testing" section that points into the
new section on QA and testing infrastructure in the ref-manual.
(From yocto-docs rev: 493051e1770e07b89c19a1f235f1dd226610c77a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10596]
No information existed for the version 1.0 YP Compatibility Program
for layers. Additionally, the version 2.0 flavor is adding a script
as part of the application process. I put in a new section on the
whole topic. Also, integrated the information into relevant sections
with some cross-referencing.
(From yocto-docs rev: 6341705d4c08901b2657c489f4e995968db00d85)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9675]
I missed one occurrence of changing "smart" to "dnf" in the
Enabling Tests section. Corrected.
(From yocto-docs rev: b5106c7a38f51dbfea6d200072039f624be7ed3a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9675]
Various fixes to replace the "smart" package manager references
with "dnf".
(From yocto-docs rev: 721dc7fb637c4c03534eb19f61b0b08a7303826d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section in the dev-manual that introduces BSP Layers for the
first time was missing a general link to reference into the BSP
Guide to help the user understand BSP Layer structure. I added
a note.
(From yocto-docs rev: c515e30a551e96e11091c3850f7eed1b034abdad)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
poky.ent - changed the "tbd" and "TBD" strings to "pyro" and
"Pyro", respectively.
Manual Head Files - Updated the manual history table with the
May release month.
(From yocto-docs rev: 076226d2986d0cf69685121e4342f50c1603fc7b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11017]
There is no current way to specify or list plug-in dependencies
when building a Wic image. The variable WKS_FILE_DEPENDS was introduced
to allow the user to use this in the recipe building the image.
I added a description and example of the variable to the ref-manual
variable glossary. I also cross-referenced the variable in the
"Plug-ins" section of the dev-manual to point to the variable for
more information.
(From yocto-docs rev: 5a1072499ab80f74ffec6af2cc0b2f1987843a25)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11048]
No documentation existed for telling the user how to create signed
RPM packages or for how to use signed package feeds. I have created
a new section on the topic to describe both scenarios.
(From yocto-docs rev: cbdde75f06b1fc190b8e4f7f93f302dc238e3e7f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section "Maintaining Open Source License Compliance During
Your Product's Lifecycle" had a vew minor typo things (e.g. duplicated
word and some formatting issues). I fixed these.
(From yocto-docs rev: 67beb658445e79129d8aae1739bb33c000367107)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10076]
The note on the title page for each manual was brief regarding
where to find the latest version of the manual. I updated the
note to have more detailed information on finding current,
alternate, and latest versions of the manual based on YP
releases.
(From yocto-docs rev: 0ec81465296a7a78309d3039af4d00caa52d2285)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10905]
I updated the section with suggested improvements for completeness.
The section has been broken into more subsections and provides the
reader with more direction on mailing lists based on components
changed.
(From yocto-docs rev: f7c9010c14d96c64d00ca32e2e217d2dd1343919)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10621]
bmaptool is integrated into the OpenEmbedded build system but is
not documented. I added a new section describing how to flash an
image to media using the tool. Also, updated a small section in the
Wic part of the manual that used "dd" to flash an example. I added
a bmaptool counterpart here and referenced the reader back to the
main new section.
(From yocto-docs rev: 98ebe9acccceea2b833c1372a3e664befd1b6aef)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10621]
bmaptool is integrated into the OpenEmbedded build system but is
not documented. I added a new section describing how to flash an
image to media using the tool. Also, updated a small section in the
Wic part of the manual that used "dd" to flash an example. I added
a bmaptool counterpart here and referenced the reader back to the
main new section.
(From yocto-docs rev: 83a9a3aa5f20c7f389306eea9213eabea997aba1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7096]
Applied a couple review comments to the section to clarify where
to set key variables. Also fixed an incorrect variable name used
to specify the *.cpio file.
(From yocto-docs rev: 24861b36804cbd636aafc36b1918bcfe33ca3811)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10763]
The final example in the section describing how to create
the base recipe using receipetool create was wrong. I updated
it to use the -d option in addition to the -o opetion. I also
changed the description to match appropriately.
(From yocto-docs rev: 8cc6d5e21532eeaac0e6d9ace3e0b58803a9804e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7096]
We did not document how to create an initramfs image to be included
with a kernel build. Various variables sort of inferred the
knowledge. I created a new section in the "Common Tasks" section
of the dev-manual that describes how to create an initramfs image.
Also, I updated the kernel.bbclass reference section to point back
to the new "how-to" section.
Finally, I also created a bunch of cross-reference links from various
related variables back to the new "how-to" section.
(From yocto-docs rev: 289dfbd5d24241e42446a043104eecd6dca76f13)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This term was incorrect and I have replaced it with the
term "partitioned."
(From yocto-docs rev: 50dd5c6994a2f799fdaf1ccbf7138b0074e981ee)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
new information on how wic works
(From yocto-docs rev: 7b6a54a593a678442541b1fa6847498a792183c7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10351]
I added a note to the "Post Installation Scripts" section of the
"Writing a New Recipe" section to call out the fact that the
RPM package manager will not install packages on the target when
any RPM post-install script returns a non-zero exit code when
the script is run on the target.
(From yocto-docs rev: 8565b0ba874f3357500a91640c0f77077c83b8d6)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10692]
I updated the STAGING_DIR variable description to have a reference
to the SYSROOT_DIRS variable as well as the "Sharing Files
Between Recipes" section of the dev-manual.
I also updated the "Sharing Files Between Recipes" section so
that the role of SYSROOT_DIRS is explained and actually used
in an example to add another directory.
(From yocto-docs rev: 6539fcf632cfa3f076f874535ee9fc7ac291fbce)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes to the following:
* All manual revision tables to indicate a 2.3 release proposed
for April of 2017.
* Updated the poky.ent file so that all variables needed reflect
2.3 values.
* Updated the mega-manual.sed file so that processing of links in
the mega-manual work for a 2.3 release.
(From yocto-docs rev: 926e282c17b67c79b94a0b62a0b18bfbe0b26c40)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The string appeared in the text as "$(INC_PR).0". So, fixed
it to be proper with the curly braces.
(From yocto-docs rev: 0e4ca6cd3d0eae847243fc624c5f119d004cf40c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed [YOCTO #10588]
This section was confusing due to the fact that it used an actual
set of IP addresses and image name where they should be clearly
called out as examples. Fixed it.
(From yocto-docs rev: 4682899c7b70c730256412bf08f469c457af1c2e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a new section in the "Common Tasks" chapter to support
the fact that BB can now build for multi-configurations.
(From yocto-docs rev: aa21aeb2f3d2f9d5a3a6e7175b7c6f13da5f608e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed [YOCTO #9481]
Complete re-write based on Mark Hatle's steps. I converted
from sub-sections to an ordered list.
(From yocto-docs rev: f83bfe5d3dc012b924b6870672d7260a9c0bc3ee)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10392]
Moved the last bullet item from the list that was about
DEPENDS to a note form above the list. This was done because
the stuff for DEPENDS is more general.
(From yocto-docs rev: 2879d97b14322f1f9495288fc7f2298a186c5f68)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10392]
People often needlessly put [noexec] on tasks, making the recipes
more complicated than they need to be. I updated the first bullet
item in this section to more clearly explain how to do this.
Also, added a new bullet item to the end to point into the DEPENDS
variable for more clarification.
(From yocto-docs rev: c61e61c1a5f9524c50bfc26335ea6c2027cafd19)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added string "October 2016" as the release date.
(From yocto-docs rev: db40986677746afbbb138d9cbe3885111550b7c5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10360]
Added a new section to reference into the OpenEmbedded Styleguide.
This will help people writing new recipes to conform to known
styles.
(From yocto-docs rev: 40c12742c78f5aba5bb4e43f759e8c478470fd83)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9554]
In the examples, I changes "IMAGE_FEATURE" to "IMAGE_FEATURES_append"
(From yocto-docs rev: 3fc2cc217a0a67b3e0739c6a235ab8e350c4b7c3)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO 10323]
Made a code change to the example script that helps a user
locate GPL files.
(From yocto-docs rev: bd02012de75f0c30887d3a5bb4aa219703a3ee1c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10323]
In the Providing the Source Code section, I replaced the 3-line
code example that returns GPL files. The bits I put in are a
script that does the trick. The 3-line example was not working.
(From yocto-docs rev: a07873d46b5135555961499c6ce8f0b6b8bf2c8f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9166]
I applied some review comments to the section. Pulled some stuff
out that did not apply.pdated the devpyshell section
(From yocto-docs rev: 7300358570de4da94ff5f22afd30128ef8dd0f13)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9554]
I applied some review comments for the section on using GDB
on the target for debugging. Included a new note on optimizations
considerations.
(From yocto-docs rev: 23f0dd82f682ea39849de0f589ee1ebfb16be749)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9166]
In the dev-manual, I added a new section titled "Using a
Development Python Shell." This section is similar to the
section that talks about using devshell. The section is
tied to a reference section on the do_devpyshell task.
In the ref-manual, I entered a new task reference for the
do_devpyshell task. It is brief and references into the
new section in the dev-manual.
(From yocto-docs rev: 637128809e298c3d5e660f6da2366f8e9e307218)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9554]
I added a new section titled "Debugging with the GNU Project
Debugger (GDB) on the Target" that provides requirements for
this type of debugging.
(From yocto-docs rev: 5d15c6c5f2030395f9faea8a5ef3ead1b98042d8)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9285]
Altered the wording to more accurately reflect the issue.
(From yocto-docs rev: 66cda9997a6c17752903a0b5600fb8cae98566e9)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8631]
These fixes cover the following:
* New glossary entry for SYSROOT_DIRS
* New glossary entry for SYSROOT_DIRS_NATIVE
* New glossary entry for SYSROOT_DIRS_BLACKLIST
* New section titled "Sharing Files Between Recipes" in the
dev-manual's "Writing a New Recipe" section.
(From yocto-docs rev: e541a3c8967f51b903d9dd7978009f4fa7c2f014)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9679]
I added a new section titled "Dependencies" inside the section
that talks about writing a new recipe. This section details
both build-time and runtime dependency behavior and conditions.
(From yocto-docs rev: 37305ea09473dcaee2db4f9cc37c7ce0fc33c52a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied various edits to the "Writing a New Recipe" section.
Several nits.
(From yocto-docs rev: 17818ff89805e0df3a0445f64a4f9133550fa7d0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I applied several nits across the manuals based on reviewer
comments. All these corrections relate to the task of shuffling
topics around that have to do with the extensible SDK and the
devtool.
(From yocto-docs rev: 9f8079adc7fa2897fd885aff8e64f9721212e9c7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Removed the note box formatting for the cross-reference
from the sdk-manual and dev-manual sections that
talk about devtool. The reference is now non-note
form and goes to the ref-manual devtool quick ref.
* Added devtool upgrade as a third item in the list that
introduces methods to use devtool.
* Fixed the working on the devtool finish step 5 for both
the dev-manual and sdk-manual.
* Renamed the new chapter that describes different projects
you can use devtool on. The focus is on using the SDK
toolchain directly.
* Scrubbed the entire sdk-manual for the term "toolchain
installer" and replaced with "SDK installer".
(From yocto-docs rev: 6d4daef49cc6d54a700a8c3965c9e8814f75d20a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made several improvements to this section.
* fixed a typo where a YP release was referred to as 7.1
instead of 1.7
* Added a note box to the "Using Variables" list item
elaborating on the expansion behavior.
* Removed the detail around the WORKDIR discussion.
* In the "Loccate or Automatically Create a Base Recipe",
I added the devtool add method to the list of ways to
create a base recipe.
(From yocto-docs rev: 79c86fc3653c747ae42f08528063a8984cdd3b4d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Did the following:
* Added the devtool upgrade flow to the SDK manual.
* Removed the devtool Quick Reference from the dev-manual and
added it as a new chapter to the ref-manual.
* Made sure all the links and cross-references work now with the
moved material.
* Updated the Make file so that the manual set builds correctly
regarding the new chapter in the ref-manual.
* Created cross-referencing notes in both the sdk-manual and the
dev-manual to the newly located devtool Quick Reference chapter.
(From yocto-docs rev: fda0bf68b3654b1b96407d552c5254657465b5fc)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the figure to use the new devtool finish command. Also
updated the text to provide an approprite description.
(From yocto-docs rev: b26ee800e457a84fe45ecf031cb94f65c38d05f5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the devtool add and devtool modify flow diagrams and
supporting text to exactly match those from the SDK manual.
Also, updated the help output generated from the devtool --help
and devtool add --help commands.
(From yocto-docs rev: 002297a8ed3979f012fe228b7edb77514e7528a2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10183]
Added a new variable entry for the PACKAGECONFIG_CONFARGS variable.
With the introduction of the new PACKAGECONFIG_CONFARGS variable,
many places in the mainstream YP documentation that referenced
how to pass configure arguments using EXTRA_OECONF needed to also
make mention of this new variable. I added many cross-references
to the new variable.
(From yocto-docs rev: 00f02d45319bab90b72eab89fcb69cbe8bd05bb5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9285]
Applied some rewording to the last bullet of the "Known
Issues" section in the "Enabling GObject Introspection
Support" section.
(From yocto-docs rev: 6cc0c7925984a29a115819195b800e2ecd8b4757)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9707]
* Replaced gummiboot with systemd-boot in the dev-manual
* Replaced the gummiboot class with a new systemd-boot class
* Replaced the appropriate gummiboot variables in the glossary
with new variables SYSTEMD_BOOT_CFG, SYSTEMD_BOOT_ENTRIES,
and SYSTEMD_BOOT_TIMEOUT.
(From yocto-docs rev: 778b620e65cc68531b3c41aeb8f27f2a07eb0d00)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10135]
Some small problems were fixed:
* Added a cross-reference in the FILES glossary entry to the
PACKAGES variable. The two are tied and there was not a
reference to it.
* Removed a redundant "/" character in a pathname example in
the dev-manual.
* Removed a redundant "/" character in an example pathname
in the FILES glossary description.
(From yocto-docs rev: 11a397c232696deece7ac5c6dafcadb87d7a5775)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9285]
Added a new bullet item to note that Using QEMU in usermode
might not work properly when running 64-bit binaries under
32-bit host machines. In particular, "qemumips64" is known
to not work under i686.
(From yocto-docs rev: 896beb3fddd427f8327d4ddd35be253866c90377)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9672]
A couple typos here needed fixed. Also, a missing statement in
the JSON example.
(From yocto-docs rev: 8756cb363a70a8b77077a666c62c0f678ffb3d3e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the introduction of the trio of variables used for package
feed naming in the "Build Considerations" section.
Fixes [YOCTO #1882]
(From yocto-docs rev: 4c7efd08f9f543dd3c4f2e6d68c72d16fd7b0b8c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9672]
Updated the "Exporting Tests" section to reflect the proper
local.conf settings.
Added a new section "Installing Packages in the DUT Without the
Package Manager" that describes how to use a JSON file to accomplish
package installation on a Device Under Test without a package
manager.
(From yocto-docs rev: 0275d2a8234a6418f32e802bcf46b7e68053e05a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1882]
Re-did the steps to set this server up.
(From yocto-docs rev: 45e073a60ef7b1d540439b621266a9019a3d2947)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the extra server instructions and just left the ones
for SimpleHTTPServer.
Fixes [YOCTO #1882]
(From yocto-docs rev: fb502c608b015c37f361f4b54874ad199a67feb4)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1882]
Edited the sections in the "Working with Packages" section
beginning with the "Build Considerations" section with text
received from Daniela Placencia.
(From yocto-docs rev: 07a55662d6ac98875555f80f766de263b131185f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Updated poky.ent to have the appropriate 2.2 variables
* Updated all manual revision tables to have a new entry for
2.2 - used "Sometime in 2016" for the date.
* Updated the mega-manual.sed file to process internal links
for 2.2.
(From yocto-docs rev: 2acd49ee197e3e3e725f4cb8cc432437afd8646b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes the use of this replaceable consistent with the
migration chapter in the ref-manual.
(From yocto-docs rev: 5c2f13f505986d2efc7bfa72c79b933f5a5c5ec1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9264]
Several occurrences of tools-profile and the like had to be dealt
with.
(From yocto-docs rev: 62f45579970f47d22dabe921a51c663059a04576)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These classes have been removed. The bootimg class was sucked
into the image-live class. I removed the reference sections to
both classes and fixed the references throughout the manual set
as needed.
(From yocto-docs rev: 649d56b54987580039cbd52f54642112f810ffad)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Occurrences in many manuals and one figure.
(From yocto-docs rev: 26d30cd162083c62216fb4ab526d0b231f453de1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5517]
I added two package management system generic implementation
details to the section. This brings the section up to speed
as the definitive work on combining multiple versions of library
files into one image. We no longer have to refer the reader
to a separate wiki page.
(From yocto-docs rev: 450e718ca1b853f332c4e607a5a76efd689f7769)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Discovered typo in the file... "naivte" instead of "native".
Fixed.
(From yocto-docs rev: baa9fb2b553db425c8a5cfca04d913963e24d0a0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the introduction of a DISTRO_NAME_NO_CAP variable, the occurrences
of the DISTRO_NAME variable had to be checked to see if they really
should be using the "NO_CAP" variable instead. Output and actual
branch names are case-sensitive.
(From yocto-docs rev: 711a3255538298dd3c4bd2af8ad13bc2d159c872)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated to "April 2016" for all manuals that use this table.
(From yocto-docs rev: 4d3753cc92c446668b0c383736c2071e24e53dd2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9264]
I handled the occurrences of "oprofile" and "tools-profile" throughout
as I could. They are not all done yet. These in this commit have
been removed.
(From yocto-docs rev: d76e264ea210846ad8080134bacd56462ba69d24)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5092]
Added a new subsection to the "Configuring the Kernel" section to
describe the part of the configuration audit phase that deals
with non-hardware and hardware options.
(From yocto-docs rev: 2545c3f2cf45ffcc9bf9f388d929c8242b74b011)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9264]
I commented out a large section that had to do with running
oprofile. Also, located and removed the link to that section
from the profile-manual.
(From yocto-docs rev: 63d6e754f994693c9a4d4b8211c6ef5f817c31f7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The term "meta-toolchain" is legacy now. I went through and removed
its use except for where it appears still as output from the
oe-init-build-env script.
(From yocto-docs rev: 1cc134060459278997d57f1293f54091c5404d85)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Removed some eMenlow stuff
* Cleaned up the description of the BSP structures we have now.
* Various links fixed into the SDK manual.
* Other minor fixes.
(From yocto-docs rev: 5e45005d7ff2254df2754a5ea2d7efd7f1c19a42)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hob and the packageinfo class have now been removed from the
code base. This patch removes all references to:
* Hob
* meta-hob
* packageinfo and
* BBLAYERS_NON_REMOVABLE
from the documentation.
So long, Hob, and thanks for all the fish.
(From yocto-docs rev: 6a1ba2761d5c2ec1072616ce3d791787f1b1b2a7)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied better wording to a couple areas in this section as
pointed out by the review.
Fixes [YOCTO #9114]
(From yocto-docs rev: f5a402aa08b102c767e112d8df05041650733d54)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created the new section for the devtool upgrade flow.
(From yocto-docs rev: f3a7f78305ce5045604d9892e18b31b7eabcba62)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created a new figure for the devtool upgrade flow. Put the figure
in the "figures" folder of the dev-manual and the mega-manual.
Updated the Makefile to include the new figure when creating
Tarball of the dev-manual and the mega-manual.
(From yocto-docs rev: 4b504f6f179ca7c7e9a69f23fc25b1f33ced8e44)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made some review changes to the workflow structure, devtool
add flow, and devtool modify flow diagrams.
(From yocto-docs rev: f432d9b0270615974e67a0cc243560fdbfa44724)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Closing in on the devtool add and devtool modify sections.
(From yocto-docs rev: 202b688c03cc1801576bbed3b771bb329f6b8520)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New figure and some writer notes for now
(From yocto-docs rev: 0a627626f5f353e514b0225b468b0bd0fa3ceef3)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dev-manual: I did not have the checksum figure there or the sources
directory.
mega-manual: Per normal, had to copy the updated figure into the
figures directory of the mega-manual.
(From yocto-docs rev: d6fb3373b2f3c1e89da87d3e8b9877e643f73c8e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This style is for review purposes and can be implemented in
the XML file using <para role='writernotes'>. The text in the
paragraph is rendered red.
(From yocto-docs rev: db990802594af3a70b11e320c06fe6a9dc80579b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created a new figure for devtool add flow. Added support
for it in the Makefile. The figure, as usual, needs to
reside in the figures directory in both the dev-manual and
the mega-manual.
(From yocto-docs rev: 2040a31b806fdade060f7a4182a09673b76db7b3)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9114]
Added a "Notes" box to address run script naming points
and the fact that running a task's script is identical to
what BitBake would do when it runs the task.
(From yocto-docs rev: ddfba59743c977a3a3483ed9053434d3c622f698)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8620]
I applied some review comments for the changes made to several
areas in both these manuals. Minor wording fixes and the
dropping of some changes as directed by Joshua Lock.
(From yocto-docs rev: 71af89da612c37162ba27844c297879d643caf65)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9114]
Added more detail on how to run commands from within the devshell.
(From yocto-docs rev: 6535a8b80bbad3a4ece191c7e5a145ef5e09f1e2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8620]
I went through and made some judgement calls on the use of
"native" and "sdknative". I tried to make sure that the reader
understood the real meaning of these terms.
(From yocto-docs rev: d711e8c6dfb32a4ad79e9d11dbf44fbc759d0245)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8634]
To clear up the behavior the COPY_LIC_DIRS, COPY_LIC_MANIFEST,
and LICENSE_CREATE_PACKAGE variable behaviors, I updated the
glossary descriptions of the variables. Also, added more info
to the "Providing License Text" section in the dev-manual. Tied
everything together with good referencing.
(From yocto-docs rev: e7b2a1ed29dcd9d572b71f756e7705e6499a05ac)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8634]
I updated the "Providing License Text" section to include some
verbiage on the new CREATE_LICENSE_PACKAGE variable.
(From yocto-docs rev: db2155875dd741000e5f67253486580bba70584f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Notified that Anibal wanted this reverted from the commit
that changed it. This is due to the fact that we now use
the same name for the new recipe ptest-runner instead of
ptest-runner2 to maintain compatibility with old code.
Reported-by: Anibal Limon <anibal.limon@intel.linux.com>
(From yocto-docs rev: a1548ee35a797035247d8fdee6127560db9ead5d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rewrite of devtool reference section. This was a separate commit
but got squashed wrong so it ended up with this commit.
The changes to "Image Generation" section reflect the new, more
detailed image generation figure
(From yocto-docs rev: 827c6872b88c17d2d0c8d44b1024fff19076e505)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Generate an Image Using an Existing Kickstart File"
section had a missing subject. Fixed it.
(From yocto-docs rev: 7ab6d1422690373e59d681e423a80595879788b4)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8844]
Made some changes to reflect the requirement of certain options
when creating a partion such that the partition is automatically
mounted.
(From yocto-docs rev: 096f33b7b7a0360c1df345dd669bbe00723b1882)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed out "ptest-runner" with "ptest-runner2" and updated
wording from "script" to "program".
(From yocto-docs rev: 221d7c6125f5fc02b9ce7bcf177fb382f421ff9f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied this patch from Anibal to correct an earlier patch.
(From yocto-docs rev: 9b944a5f4192b2e03df4ddcba5af4949df7bb8a9)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The changes are for the poky.ent file and the mega-manual.sed
file to take care of variables. Also, entries added for the
manual revision table.
(From yocto-docs rev: 60da39f85165e2d4aef55d456f8203183e089433)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since 2.0 release KVM mode does not require VHOST
enablement and a new option was added to support the
old mode. Updated the list of runqemu command options.
(From yocto-docs rev: 6bca626b163ee5e35e04d659579076ab92c4951a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed [YOCTO #8168]
I placed a couple notes in the "Configuration" and "Compilation"
sections within the "Writing a New Recipe" section. These notes
point out that the build system (as of release 1.7) now disables
several *-config scripts. The user should be using "pkg-config"
to ensure proper pathname construction and location of these
types of scripts.
(From yocto-docs rev: a46fd0f7b4d5da7bf3b218441ec5b9a6ef552266)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8298]
Updated several classes with feedback from Jose Lamego of Intel.
The feedback fixed some class groupings so that previously isolated
classes could be bundled under common classes (e.g.
autotools*.bbclass).
I scrubbed the cross-references for cases where a particular
class became "undocumented." The cross-references now point to
the bundled class entry in the ref-manual.
(From yocto-docs rev: 07a533cb41ad26d202f4e303f2dbc7d7bf26e076)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8412]
Forgot about CentOS. I have added that item in.
(From yocto-docs rev: f298ef74d7366ef01b9b1efcf5b0824a6e1aa742)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8412]
Added another bullet item that lists the required packages per
distributions needed to enable the runtime QEMU tests.
(From yocto-docs rev: f7e42f9b069e0fd3b419b571554669a89bc843e6)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The wrong command was in the help example in the note.
(From yocto-docs rev: a1ba70d1dcc680c2ddfb8fd5c544f57a29745cbc)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These updates included editing the poky.ent file so that
DISTRO and related variables are now 2.0. Also updated all
the title pages to have the manual revision table correct.
Finally, used my email for the manuals.
(From yocto-docs rev: deae61bfbb528ea0ced82399a78260a7f34a7a11)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8375]
Applied some suggested simpler wording for this bulleted item
of information. Also, did some paragraph editing for better
organization.
(From yocto-docs rev: fd3e277b01ed6fd3580a1c008b1ac05bcfb98f38)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I found four occurances of "1.8" used in manual. These needed
to be set to "&DISTRO;" so that they resolve to the latest
YP release.
(From yocto-docs rev: 9db8a2a04085623588e51740a45ee58c500649f6)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8256]
Applied some review comments to the multilib example. The
syntax was incorrect.
(From yocto-docs rev: 4e8abf17374535be3b168525ed2bec66fb1ce759)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7910]
Three occurrances of this typo were fixed.
(From yocto-docs rev: f538137c93d4b34c6d5836d9b21b687fb79ae182)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8256]
The suggested multilib example in the "Using Multilib" section
was broken. I replaced the lib32-connman library with the
lib32-glib-2.0 library.
(From yocto-docs rev: fa302dd1b7d71c880815fdc4b9a6764c095d476d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8261]
Errors are being generated to Eclipse users when building
an Autotools project. I added a note with steps to avoid
the errors.
(From yocto-docs rev: 7b915bab1b8a321f81453ad00886945c294a1d60)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Poky's commit edde3e58da included
the biosfilename option on the runqemu script.
(From yocto-docs rev: 3c834547ace29c14bce6afa0369a727f3afbd650)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was a complete re-write of the YP Quick Start in an attempt
to streamline it, remove unecessary detail, and make it flow better
with the examples. In doing so, many manuals were affected due to
section headings being renamed, information being moved, etc. Here
is a list of the changes by manual:
Makefile - Removed two figures from TARFILE list for the
yocto-project-qs.
Added building-an-image.png to the ref-manual TARFILE list.
Added using-a-pre-build-image.png to the adt-manual TARFILE
list.
Repositioned 'eclipse' in the adt-manual TARFILE list.
adt-manual: Fixed a cross-reference so that it goes to the new
'Building Images' section that is within the YP QS.
Added new section 'Example Using Pre-Build Binaries and
QEMU' to hold the information that was formerly in YP QS.
dev-manual: Removed a cross-reference into the YP QS that promised how
to configure the most efficent build.
Changed a cross-reference into the YP QS from 'The Packages'
to 'The Build System Packages'.
Changed a cross-reference into the YP QS from 'Building an
Image' to 'Building Images'.
Changed a text reference from the YP QS to the adt-manual.
Moved the bit about getting YP files by using the YP website
from the YP QS to the dev-manual.
Changed a cross-reference into the YP QS from 'Using Pre-Built
Binaries and QEMU' to 'Example Using Pre-built Binaries and
QEMU', which was moved to the adt-manual.
ref-manual: Changed a cross-reference into the YP QS from 'What You
Need and How You Get It' to 'Setting Up to Use the Yocto Project'.
Moved the note about if your system has oss4-dev in the
packages area in the YP QS to the appropriate area in the
ref-manual.
Moved the introduction information regarding building an image
along with the figure from YP QS to the ref-manual's section on
building images.
toaster-manual: Changed a cross-reference into the YP QS from 'What You
Need and How You Get It' to 'Setting Up to Use the Yocto
Project'.
yocto-project-qs: Complete rewrite that changed many section headings and
removed much detail, which was placed in other manuals.
(From yocto-docs rev: da4ed8147b04963a700caa784bda709c57b4eb6e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The customization layers were pointing to Sourceforge site for the
XSl files needed to build the manuals. Throuhgout time, this site
has failed me enough to warrent trying to get these XSL files from
some other source. Rather than ship the XSL files with the YP release,
we decided to create some mirrors and point the customization files
there.
(From yocto-docs rev: 4fd1703870694dff1f593b421f90aad0803d9e65)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Configuring the Kernel" section did not address "defconfig"
files. In my opinion, this is a hole in the docs for this section.
I added a new section titled "Creating a defconfig File" that is a
sub-section of the "Configuring the Kernel" section.
Additionally, I added a brief sentence in the introductory paragraph
to include the fact that this new information exists.
Finally, I included the bitbake command that ensures that the
proper configuration steps are minimally run before a user attempts
to use bitbake to get into menuconfig.
Fixes [#YOCTO 7474]
(From yocto-docs rev: 13c0c7dddca59474ef65dacc12f0bfaa38933887)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section needed some more information. It referenced the yocto-kernel
script and menuconfig. I added references to the appropriate areas of
YP documentation for these. I also changed wordings to that it is
apparent that .config is created by menuconfig when changes are saved.
(From yocto-docs rev: bd1a3f6fa0268635f52bc77d9b35b5110b18a9f8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated both the PARALLEL_MAKE and PARALLEL_MAKEINST variables
by expanding the note to indicate how to prohibit parallel make
threads. Also, added a cross-referencing link to the
"Debugging Parallel Make Races" section.
I added a short note to the start of the "Debugging Parallel Make
Races" section noting that if they can't properly fix the condition,
they can always do a work-around to set the PARALLEL_MAKE or
PARALLEL_MAKEINST variables to null.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: f8dccf3f115647cb039d91415819186cf38fa8bb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7524]
The "Writing New Tests" section needed more clarification in the first
paragraph. One requirement is that minimally, an empty __iniit_.py
file must exist in the runtime directory.
(From yocto-docs rev: 519d0ff95e2ffbdb615d6dc27a6c11b393eb4b53)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding Luna and dropping Juno. Pretty much went through the
"Working With Eclipse" section and dropped Juno and added
Luna. A major deletion was the BitBake Commander section using
Hob. Todor told me to drop this section completely. Note that
I also added a couple new YoctoProjectTools that appear on the
menu: SystemTap and yocto-bsp.
(From yocto-docs rev: b63ec6c706f41dc4666c2fd79d797962c35f8baa)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7386]
Apparently the "‐" ENTITY used throughout the YP manual set to
get literal "-" characters in example commands renders into a unicode
that is not a dash. This results in users getting errors if they
attempt to cut-and-paste a sample command that uses a "-" character
from the manual into a shell. I have universally replaced all the
"‐" strings in the YP manual set to "-" strings.
(From yocto-docs rev: ef6dbf591eee70866f163e3c98454b6145f4fa3a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I found a link that is processed by the mega-manual.sed file correctly
but for the situation it does not resolve right. The link is a
"naked" link. In other words, it doesn't have a #<tag> part.
When the .sed file sees these types of links, no hyperlink is
generated. I found a case in the dev-manual where I reference the
Toaster Manual in general and would like a link that would take the
user there. So, I had to add a #<tag> part to the link in the XML
(From yocto-docs rev: ab11e9822b5ec1b0f7138f1419ce9c340f6f27ad)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I don't like these. I fixed it up.
(From yocto-docs rev: 2267fc3353563a249cc9bf16ec0bf4d5930ddaa9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I put this in the intro list for the section that presents various
ways to use YP.
(From yocto-docs rev: 05f924f799a1f1396bf7154b298aabc3d06ad1d7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This practice is not good. I had one in the manual. I reworded
the text to not use that term in a link.
(From yocto-docs rev: 53636ae7370827945b31d11785410dd44670bb91)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Repositories, Tags, and Branches" section had some wording
that described how branches are maintained in the poky repo that
made it hard to maintain in the doc from release to release. I had
a list of past releases by name and as such would have to update
it every release to make it reflect the last set. Well... this
is not the best way to do this and proved out as it slipped through
the cracks for the YP 1.8 release. Consequently, I recast the text
so it is "release proof".
(From yocto-docs rev: b6e27d06df58a43bb767e9616ccf3c0711e83cf6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added some stuff about "poky" meaning the default distribution
when using YP and the poky git repository to build an image.
(From yocto-docs rev: bd534a5bdf405044c8f1a60ee9e251bff2a0e53c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The send-error-report tool syntax has slightly changed since the
documentation was written. Removed the [server] part of the
command and added more detail on its use and results.
Reported-by: Michael Wood <michael.g.wood@intel.com>
(From yocto-docs rev: 10e28ab877b327301be536e5d515d5a419d082ac)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wic is not using parted and other runtime dependencies from host
system anymore. It uses native tools instead. Removed host parted
from the list of requirements. Added instructions to build native
tools.
(From yocto-docs rev: ab22aff62bd9ffde3dfefe9fcabadc6e5aae7e31)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This involves the following:
* Inserting a new row for all manual revision history tables
to have "October 2015" and 1.9 as the release information.
* Updating the mega-manual.sed file to process links for 1.9
* Updating variables in poky.ent to deal with the 1.9 release
variables.
(From yocto-docs rev: 1ed55c08b96cf0fded38833635111a5c6da86781)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was incorrectly stated as 'bitbake -c install' in two
places. I substituted the correct string.
(From yocto-docs rev: fe54de82cff054d4319c635a0ddba2de7cc6ebd6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7535]
Removed this from two places.
(From yocto-docs rev: d169ce99610745e8c1b4b53d898f526e557af665)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review edits from Paul Eggleton.
(From yocto-docs rev: 4815556b6c9f45ce230afede7cb3b2aadf0bef1c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review comments from Paul Eggleton.
(From yocto-docs rev: 403c9ae5443eaf2a115e2224f07ee19f98c8139d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The docs are not building on CentOS and we think it is due to the
XSL templates being called for the Eclipse parts. I located all
the "current" templates and switched them out for "1.76.1" version
as are used by the mainstream doc builds.
(From yocto-docs rev: afbddde6524630433dfec973bbe886de32395bc8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Trevor wrote a nice paper (tutorial) on the use of devtool that I found
to be very helpful in developing the information for this new workflow.
I decided to publicly credit this effort with a small footnote near
the top of the section.
(From yocto-docs rev: 97d234f2d535f85e5a50ac4e7f0c0a79579cd004)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton reviewed the section.
(From yocto-docs rev: 82d9750b4349b3c54f73118ec7d65f0bb96e3f7a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits to the "Customizing an Image Hostname" section from Ross.
Updated the last paragraph to not imply incorrect information.
Fixes [YOCTO #7417]
(From yocto-docs rev: 8997be297077ee0052a5afbe50b9864cdef14058)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7417]
New section to address how the user can change the devalt image
hostname written out to /etc/hostname.
(From yocto-docs rev: 4ac6bc05947e56106aafcc6f9aef93bd93293fba)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Schedule did not permit support for Luna to complete. So, I
backed out the half-complete changes to support this version of
Eclipse.
(From yocto-docs rev: 1ca893766047f30ffbb0c99e51e575ea1302e7bc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7460]
There was a single occurrence of specifically calling out that PR
needed to be manually incremented in the workflow section of the
manual. It was step 8 of the Quilt flow. I deleted this step.
Previous edits to the set have included extensive instruction on using
a PR Service, which is basically what replaces the need for manually
updating PR as it was in the past.
(From yocto-docs rev: d8db2175225be45cb3f2b4d11f8281c5b1f40ad4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7386]
Apparently, copying HTML displayed commands that have a
double dash created through "‐‐" in the docbook source
causes some issues in the shell. I have scrubbed the manual set
to replace any "‐‐" strings with "--".
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: e88b813b71d7d6d8acd8a8638f2db71265145b64)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
First edits to update this section to support the Luna version of
Eclipse. I weeded out Juno, which leaves Luna as the preferred
version and Kepler as a second version if they don't want to update
to Luna.
(From yocto-docs rev: 4f2dc237aa3498402cdf637ac2e85fdf0c3bf8a0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modified the area from which the Eclipse Git repository is located.
This has changed.
(From yocto-docs rev: ec2bf4125877b28dae0681c8b578c7bebec5a5b6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These kernels are unsupported for the 1.8 release. They will still
show up in the YP source repos but the recipes are removed from the
poky area. Updated all references appropriately.
(From yocto-docs rev: a9adc071409fd31dabc3affec12350c300312600)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed wording to be more accurate.
(From yocto-docs rev: 1acb7ce94a4f4b02cc50d1e098f04a77d9a53ab3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the last paragraph example as it is not a good example.
Unfortunately, there is not a good example so I replaced it with
a minor suggestive work-around at the end of the first paragraph.
Also, used some <replaceable></replaceable> formatting for the
first paragraph.
(From yocto-docs rev: 6c3989fd4fe41a6434d70208d59747060e62a366)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7256]
In the "Serial Console Connection" section there was a link to
TEST_POWERCONTROL_CMD when it should have been to the
TEST_SERIALCONTROL_CMD variable.
(From yocto-docs rev: 9ec64c86bd4171a017898daa332d2a98fea0358a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The description for "tc" was described as "the called text context..."
rather than "the called test context...". Updated the description.
Fixes [YOCTO #7269]
(From yocto-docs rev: 0da4437c26225ce0302f10f7ba3c012f1f990c74)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These edits help place the two sections within the new organization
that basically splits out the devtool and quilt methods as ways
of modifying your source code.
(From yocto-docs rev: 1dc2e8783d9774bb98a30e06d114f1c9bfb85b71)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using the 1.76.1 version in all the customization layers so
the manual revision tables will build with boxes.
(From yocto-docs rev: 85a31ef53a59d17bed23ebf57a14db507eb21338)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Completed draft of the new devtool material. This commit affects
some linking and figures across the YP doc set.
* Added the build-workspace-directory.png file to both the
dev-manual and the mega-manual.
* Updated the Makefile to include the new figure in the TARFILE
for dev-manual and mega-manual.
* Re-did the section organization to pull the quilt and finding
source file out of the "Modifying Source Files" section.
(From yocto-docs rev: 4585b9fbb1636ae3c65e2e3ad2d1d6baca636e59)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added text to note how this term is used, what makes up the
OE BS, and how the term "build system" is used in general.
(From yocto-docs rev: 2af0a59a84fd1cf6d23db29f470cb5644f962746)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The list of terms had a "build system" term that basically
described the OpenEmbedded build system. I dumped this entry
in favor of "OpenEmbedded build system." I updated the term's
description to cover the generic term "build system" for no
confusion.
(From yocto-docs rev: 0ada8348a2ace6ce99e640d1c1f21812188151d5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This start to the script is not really necessary and is in fact
the rare case. I have removed two occurrences of it in the
"Post-Installation Scripts" section where it was used in code
as the best form to create a script.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: f7c1a1e135e8a9d76005bb6ae7b9cc2810f0af90)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found a typo in this list. The "qemux86-64" should be "qemux86_64".
(From yocto-docs rev: 32f62f51c1574f3a479c12b67aeba7ebcb743a02)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section on "Handling a Package Name Alias" was confusing and
wrong. We decided to eliminate it. The section was removed from
the dev-manual. The corresponding variable DISTRO_PN_ALIAS
remains for now but without the cross-reference link to the
now missing section.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 9938cdcc8488baffa4252288bf45243055e76fed)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scrubbed out the occurrences of eglibc and replaced them with
glibc.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 868ceda79b1c738349e512e523c850b24f9232ca)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The way the old manual set had worded the use of the
BB_NUMBER_THREADS, PARALLEL_MAKE, and BB_NUMBER_PARSE_THREADS
had become depricated. It suggested a lot of user intervention
to get these variables set to have the build system utilize
optimal parallelism. The change a while back to the build system
where the variables are set to the number of build host cores
now makes the variables automatically be set to their best
values. I have gone through the manual set and changed wordings
appropriately to reflect this.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 3a27b1792c92a2f22173315e2732f672cdad2c78)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example was out of date. Updated accordingly.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: b95535fca149abbbe4fee7e74ebc13d2bb376c27)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated some text to indicate that you should put patch files
in $BP, $BPN, or "files." Also, added more on how the patch
files suffix is (i.e. accounting for compressed suffix names
like diff.bz).
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: d9e23da24e9d86ec5e2b9d4067667478f3e56ba1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patch files can end with compressed suffixes such as
diff.gz and patch.bz2.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 69993710d1466dddc804c33c1d76f46d0982d28f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the "Fetching Code" section, some loose description of how the
build system reacts to the two checksums in a recipe existed.
Robert asked some questions about how the behavior would be if
just a single, correct checksum existed and if the two existed but
only one proved correct. Turns out, if you supply a single one then
the build will not throw an error or warning. If you supply two
but one is incorrect, then the build will throw an error or
warning. I updated the text to be technically correct without
going into huge details.
(From yocto-docs rev: f49a744821d9326314803d5003158bd402e74e0d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor edits to the original patch. These edits were caught by
Robert P. J. Day.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: b50a2e44eccd50166351611f17c643cbbc60f8b8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch was modified to fit in with the style of the book.
(From yocto-docs rev: 7c6c7ac573f92bfc844977e0d7a97ca4aac9bc70)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bob Cochran pointed out that the skeleton recipe shown in the
example is not really what is created by newbb.vim. I updated the
example to match.
(From yocto-docs rev: 2dfa712522aec5204b9e739b6060109090280011)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was a bit confusing on the use of "_prepend" as associated
with the FILESEXTRAPATHS statement. Especially in the final note
where it indicated you don't need "_prepend" if your append file
is not adding any new files. I updated the note to be more specific.
Another small change I made was to replace the Crown Bay BSP referenced
in the section with the Emenlow BSP, which has a longer life span than
CB.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 35bdc8031bc4ecf1ea321b0cafade97eeaa56513)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When you "make" the mega-manual, there were four tags across the
various manuals where the same string "id='intro'" occurred. This
causes warnings during the make process. I updated the strings to
be unique. There are no cross-references to these so no collateral
issues were caused.
(From yocto-docs rev: d0e770e0ad797031a75e2373a41723408b4b051c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section "Customizing Images Using Custom IMAGE_FEATURES
and EXTRA_IMAGE_FEATURES" needed a bit more clarification on
the image features. The text pretty much passed off image
features as all mapping into package groups, which is not true.
Some, like "debug-tweaks for example, are more like general
configurations. I updated the section accordingly.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 7dd55ff0bd6f7923e22695ed7323df5cfe17d1d4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7029]
I was missing the "sysroots" part of the path. I added this
to the pathname.
(From yocto-docs rev: 077efc8063ed01ef4067f7e71912dd52c1f6a4a6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I need to get back to how it was working and then fix the table
box issue from there. Using the 1.76.1 stylesheets makes the
build too long for the manuals and sometimes the XSL sheets do
not load.
(From yocto-docs rev: 7bc502fa069fdc4aebf5705513bb82127716859f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was pointing to a poor example in meta. I substituted
in a better example and rewrote the section to flow better around
that example and the final fabricated one.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: c7f07a2993d5c1b8e0c8b7da0e9d4c28242a5e26)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a sample string in this tree that ended in "ro" when it
should have been "r0" (as in release 0). Anytime you update a figure,
the modified file must go in both the "figures" directory of both
the manual (dev-manual in this case) and in the mega-manual.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 8e75cc23fbf03f355fade416a12b7c8fe1e656a5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: ea4489f856417d70b54a7e38da32e068cbd54cbf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I applied (in spirit) the changes here... Some literal and some
with changes.
(From yocto-docs rev: 0ccf8a43264981accbe42f729c723804e5b69b72)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes the issue where the lines for the manual revision table
are not appearing. For some reason they do not appear when building
the docs using Ubuntu 14.10 and the "current" XSL transformation
files. So, I backed up to the 1.76.1 version, which is the nearest
version where the issue does not surface.
(From yocto-docs rev: 82b15986b97b9ed082b652b562eaaf843572fdff)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5400]
Per Martin Jansa, added some information in the bullet item that
talks about the tools and the cases that can cause issues when
tuning things by machine or architecture.
(From yocto-docs rev: e8e47828df65abdc18bbd681c47719a7df77b00f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5400]
I applied some review edits to this section as suggested by
Richard Purdie.
(From yocto-docs rev: a1898cf65537e732e0e42605bb28d636077e7f56)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5400]
This is the first draft of a new section on multi-machine builds.
(From yocto-docs rev: a47fd17295d943bff482a0747f3b2e69831aa985)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added an entry for the 1.8 release stating that the release
is slated for sometime in 2015.
(From yocto-docs rev: 9799a7848f24024048eae0cbed470a2be4b4b879)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the section to account for some new variables and
several more ways to run tests against expanded targets. Also
added power control section.
(From yocto-docs rev: a0f08466c00ae51a99d790fa6c9dccef2e0f1518)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied the second round of review edits from Paul Eggleton.
Minor fixes.
(From yocto-docs rev: 2c7c45c8f09b724e92e8b59fe47834226b44b4fb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied the full set of first draft revision edits for the
new migration section for 1.7. Comments from Paul Eggleton.
(From yocto-docs rev: 90586addbc719ecaf7c768b267adf0e988e27b74)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the linux-yocto 3.4 kernel from the list in the
section describing which kernels we support. Also, added
the 3.17 linux-yocto kernel to the list.
(From yocto-docs rev: 41f57a9abe1201ed2fb657f8441c97f86f75200a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added "October 2014" to table for all manuals that have the
table.
(From yocto-docs rev: 3f9ceb4dd2397fe907bf701c842277eb65d11a56)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bulleted item on supported BSPs was very centric on meta-intel.
I rewrote the section to not be so exclusive.
(From yocto-docs rev: d8118bb6124fbbb2340ae8720cd6187fd5546967)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5482]
Added a cross-reference to the meta-selinux layer in the section
that describes how to make images more secure.
(From yocto-docs rev: 0c96273ee857808046c5a76517c1eda4aa703c81)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a short note after the example that shows how to set up
the EXTERNALSRC variables stating that the externalsrc class
needs to be either globally or locally inherited.
(From yocto-docs rev: db935135c0b060e06f6a63530df995d286002598)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new example on how to set this from the recipe or the
recipe's bbappend file.
(From yocto-docs rev: bc0d9de3378f3462729301e74419b7dede17558b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found another occurrance of where I needed to add a <replaceable>
tag set in an example.
(From yocto-docs rev: 586e5a590bb5382a28fde4670fdcd6cbb75f6c32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I missed a <replaceable> tag set on the example. Adding it
clears up confusion for how to use the variable.
(From yocto-docs rev: 8bbf2a012e580d82aaf9c9a98ad5dab1aea64f7b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
