[YOCTO #13417]
devtool is not directly tied to the Extensible SDK anymore, and
instructions in there can be split and added to the development manual.
This patch is a simple bulk move, except for the following:
- Intro added to the devtool.rst document (mostly copy-pasted from the
devtool quick reference in the ref-manual).
- Figures renamed to remove "sdk-" from filenames.
- References to sdk-manual/extensible replaced by dev-manual/devtool.
Reported-By: Paul Eggleton <bluelightning@bluelightning.org>
(From yocto-docs rev: 044d3185b858fce1febcfe3a6834b883f9a598fa)
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Screenshot from executing an NPM package built by npm.bbclass
(From yocto-docs rev: 57acf2f65e5e5798f369a24c4a0cc9b5cdb8e1db)
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10098]
This is a new section in the development tasks manual that describes
how to create Node Package Manager (NPM) packages. I put the
section in the "Working with Packages" section.
(From yocto-docs rev: d7acd9f27418d414854d25bb27842407edfe7dda)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rewrote the section on setting up and executing multi-config builds.
Broke the section into two sub-sections. One is for the standard
information that was there for setting up a multi-config build. A
new section was for the cross-build dependencies in multi-config
builds.
Part of the re-write included creating a new figure that shows
the configuration file hierarchy needed for these types of builds.
So, new figure added to both the dev-manual and the mega-manual
figures directories.
Finally, the Makefile needed updated to account for the new figures.
(From yocto-docs rev: dc158e97c216aa6e7fa3755164409d581f8569c5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #12370]
The section in the ref-manual on build history has been moved to
the dev-manual. It is more of a "how-to" piece of information than
a reference.
(From yocto-docs rev: 9634bd8dc51e2972e6a5f3a3d3b4256c8ca8749c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The manual title has changed to "Yocto Project Development Tasks
Manual".
(From yocto-docs rev: aa6b7959df1725257ee598f828d3e99e595308e5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that we have CROPS as an option, the step for preparing
your build host is condenced to include cloning poky. This
resulted in removal of step 2 and updating of the figure.
(From yocto-docs rev: 903d1f98b736a744de1d9c973f7a96b6a92049b5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a figure for this simple build workflow that uses
BitBake from a Linux host. Also did a bit of re-writing.
A new figure was introduced so the Makefile had to be adjusted
to include that figure. The figure resides in the figures
directory of both the dev-manual and the mega-manual.
(From yocto-docs rev: c3b0b1d53f551c02202cef80a8a48dd24576b975)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
The section on the devtool workflow in the dev-manual was 99%
identical to what was in the sdk-manual. I have moved the
workflow procedure from the old "Model" chapter of the dev-manual
to be merged with what was in the sdk-manual. In truth, the
only things added were a note about devtool not being exclusive
to SDK development.
The result of moving (deleting) this section was that the "model"
chapter of the dev-manual went away. The devtool stuff, Quilt,
devshell, and python shell are all out now and there is no
chapter left. So, mega-manual had to be adjusted to not pull that
chapter in when building the dev-manual. I had to delete three
figures that were used in the flow. The figures were already
replicated in the sdk-manual. The figures were deleted from the
figures folder of both the dev-manual and the mega-manual.
I had to make sure all references to the old devtool stuf in the
YP doc set were adjusted.
(From yocto-docs rev: 5dbd643d31ab502df53a22229e457a03da7772b7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
The overview section of modifying the kernel needed to be in the
kernel-dev manual and not in the dev-manual. I moved it and took
care of all the links and external references throughout the YP
doc set. One figure was involved that had to be moved to the figures
folder in kernel-dev from dev-manual. That is why the Makefile had
to be edited.
(From yocto-docs rev: 3a704b64544678785b883f82d6e82aedac6790c5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
The section that presented the Yocto Linux kernel file structure
resulting from a build using BitBake needed to be in the kernel-dev
manual. I moved it over. This required transferring over a
figure as well.
(From yocto-docs rev: 0abc6c7d87a6aa10dac28fefbb280eb51fea61a7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
The information in the dev-manual kernel overview area really neeeds
to be in the Appendix on kernel structure in the kernel-dev manual.
I moved that informtaion to the appendix. Removal of one redundant
image was necessary from the dev-manual. The figure was literally
repeated in the kernel manual already under a different file name.
(From yocto-docs rev: 00ca68e760e41448c225fb1ca4a77f5201434b93)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
Moved the section on BSP Development workflow from the dev-manual
into the bsp-guide. This procedure needs to live in the BSP
guide.
Many links had to be fixed.
(From yocto-docs rev: fbf06240f83221929aea237660146e0076207f6a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
I moved the "Workflows" section to the ref-manual. This section is
primarily concepts and needs to be out of the dev-manual, which
is being reconstituted into a "how-to" manual.
(From yocto-docs rev: 2f8bfaac3da9e2d7042ea381a3e8957f96b5bf5a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
The "Yocto Project Source Repositories" section is purely conceptual
and thus does not belong in the reconstituted dev-manual, which is
converting to a "how-to" manual. I have moved this section to the
ref-manual under "The Yocto Project Development Environment" section.
Moving the section affected several things. Three figures that where
in the dev-manual were copied and moved to the figures folder of the
ref-manual. This required deleting them from the dev-manual and
adding them to the ref-manual.
The makefile had to be edited to move those figures into the ref-manual
and delete them from the latest version of the dev-manual in order for
the tarball of files to be correct when the manuals are made.
Links to anchors within the moved section had to be fixed in various
manuals. Links to the main section "id" had to be fixed to point
to the ref-manual manual.
(From yocto-docs rev: c619ae2bbc6be93cb0324ca44e936eefec12b28c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This figure was a bit out of date. I updated a few of the file
names. Figure needs to reside in the Figures folder of both the
dev-manual and the mega-manual.
(From yocto-docs rev: 1e76477810b6be095f9ca190c9a8f0276ee4b8f9)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Did the following:
* Added the devtool upgrade flow to the SDK manual.
* Removed the devtool Quick Reference from the dev-manual and
added it as a new chapter to the ref-manual.
* Made sure all the links and cross-references work now with the
moved material.
* Updated the Make file so that the manual set builds correctly
regarding the new chapter in the ref-manual.
* Created cross-referencing notes in both the sdk-manual and the
dev-manual to the newly located devtool Quick Reference chapter.
(From yocto-docs rev: fda0bf68b3654b1b96407d552c5254657465b5fc)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the figure to use the new devtool finish command. Also
updated the text to provide an approprite description.
(From yocto-docs rev: b26ee800e457a84fe45ecf031cb94f65c38d05f5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the devtool add and devtool modify flow diagrams and
supporting text to exactly match those from the SDK manual.
Also, updated the help output generated from the devtool --help
and devtool add --help commands.
(From yocto-docs rev: 002297a8ed3979f012fe228b7edb77514e7528a2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created a new figure for the devtool upgrade flow. Put the figure
in the "figures" folder of the dev-manual and the mega-manual.
Updated the Makefile to include the new figure when creating
Tarball of the dev-manual and the mega-manual.
(From yocto-docs rev: 4b504f6f179ca7c7e9a69f23fc25b1f33ced8e44)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made some review changes to the workflow structure, devtool
add flow, and devtool modify flow diagrams.
(From yocto-docs rev: f432d9b0270615974e67a0cc243560fdbfa44724)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dev-manual: I did not have the checksum figure there or the sources
directory.
mega-manual: Per normal, had to copy the updated figure into the
figures directory of the mega-manual.
(From yocto-docs rev: d6fb3373b2f3c1e89da87d3e8b9877e643f73c8e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created a new figure for devtool add flow. Added support
for it in the Makefile. The figure, as usual, needs to
reside in the figures directory in both the dev-manual and
the mega-manual.
(From yocto-docs rev: 2040a31b806fdade060f7a4182a09673b76db7b3)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Completed draft of the new devtool material. This commit affects
some linking and figures across the YP doc set.
* Added the build-workspace-directory.png file to both the
dev-manual and the mega-manual.
* Updated the Makefile to include the new figure in the TARFILE
for dev-manual and mega-manual.
* Re-did the section organization to pull the quilt and finding
source file out of the "Modifying Source Files" section.
(From yocto-docs rev: 4585b9fbb1636ae3c65e2e3ad2d1d6baca636e59)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a sample string in this tree that ended in "ro" when it
should have been "r0" (as in release 0). Anytime you update a figure,
the modified file must go in both the "figures" directory of both
the manual (dev-manual in this case) and in the mega-manual.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 8e75cc23fbf03f355fade416a12b7c8fe1e656a5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The figure had a wrong box label in the right-bottom box.
I changed it to be like a local Git repository area as it should
be.
(From yocto-docs rev: 2963152decb2d3983180a0af9896e822c865f5cd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the recipe creation figure. I had to re-order the flow
and also generalize the supporting services installation part of the
diagram.
Fleshed out the "Fecthing" section with SRC_URI examples and much
more detail.
(From yocto-docs rev: 6a23ab2beb90376c11c426ac8bf5618994585a9d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From yocto-docs rev: c031c014bae6d6e4a239a4bcd1e8b9d5d272f851)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Created a new figure for the flow. This involved putting the figure
into the "Figures" directory of both the dev-manual and the mega-manual
and then updating Makefile to include the figure in the TARBALL
variable.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partial fix for [YOCTO #5368]
Updated the figure to not have the tarball method in there
for setting up poky repo locally. Also, added specific references
to the environment setup scripts.
(From yocto-docs rev: 7c6ececaf8eb987206567077f42213dbe4cdc4f2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partial fix to [YOCTO #5368]
I updated the workflow so that it does not have the tarball
extraction option to set up local copies of poky and meta-intel.
The figure is housed in dev-manual and mega-manual.
(From yocto-docs rev: d70214d7d348d38b574561339987bd3371167a48)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Figure changed do to how they store images now. Figure needed
a new level in it.
(From yocto-docs rev: a7d9484cc1cbba37231e5238c92cb22099345ec9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found a couple broken links. Also, noticed the yp-download figure
was out of date. Especially in the Figures folder of the mega-manual.
(From yocto-docs rev: 2e55faca221186d157dd5f77d048f1b2b90d5d91)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor text editing. Also, updated two figures to be
more recent. One for the Index of Releases and one for the
YP Downloads page from the website. They were very dated.
(From yocto-docs rev: 59255d7c0175a5280239d070ce902079229cf909)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this figure used to be at the end of the development manual.
I have removed it from both figures directories and taken
it out of the TARFILE list in the Makefile.
(From yocto-docs rev: ad8fcfc4bddb6bcee0e1a4ece78cd87ab0d51b6c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the "kernel-example-repos-generic.png" file as it describes
the bare clone method for kernel modification. We are removing
that from this manual.
(From yocto-docs rev: c25c4f662c2f8a83fd9b09583646be9dbe01424c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel workflow section was re-written to reflect that the
kernel appendix has been removed. Also, changes to the flow in
general no longer make reference to the bare clone and the copy
of the bare clone as a method used to modify the kernel.
Many links were modified in other manuals as well.
(From yocto-docs rev: 38adbcb00d4305029cfa94e5ef047da41823f021)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The figure that shows the bare clone and the copy of the bare
clone are no longer needed. The description for the kernel
workflow has been reduced to discussing only modification of
the temporary source files. We are no longer talking about
creating a bare clone and copying it as a way to modify the
kernel in this manual. That topic will be described elsewhere.
(From yocto-docs rev: f6a25e5e3763ea7a1f8a81ce377e3b520143b852)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Each time the kernel revision is bumped (e.g. 3.2 to 3.4)
Some of the figures would be out of date. The reason is they
had pathnames that included the release of the kernel.
For previous YP releases I was adding logic to the Makefile
to be sure to catch the right files dependent on the branch
from which the documents were being built. This scheme is
not scalable so I decided to make the figures generic by
adding a note within the figures explaining the place-holder
"<x.x>" as part of a pathname. Thus, three new figures were
added to the folders directories of the dev-manual and the
mega-manual. Correspondingly, the 'denzil' version of the
figures were deleted.
I modified the Makefile so that if the BRANCH is not edison
or denzil then the generic figure set is used. I have to retain
the logic for both edison and denzil to cover the case where
a user clones or sets up an edison or denzil repo and then
builds out the manuals. Basically, it had to be backwards
compatible for releases prior to danny.
(From yocto-docs rev: 8283eed4b0b9ec164b87db99c35231f8731ac443)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Danny, the "kernel-example-repo-<release>.png" file changed to
"kernel-example-repo-danny.png". To correctly make the dev-manual
and the mega-manual some things needed to change:
1. New figure created and added to both the dev-manual and the
mega-manuals figures directory.
2. The "kernel-example-repo-denzil.png" files from the dev-manual
and mega-manual figures directory was removed.
3. The Makefile was adjusted so a new BRANCH=danny area now exists
to set TARFILES for both dev-manual and mega-manual.
(From yocto-docs rev: 8b2ff6b657a1486559799e219baaec9fde2e5c6c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
