There was some confusion to this section as to just when post-install
scripts were being executed. I looked it over and the section really
is focusing more on the situations when you are creating a read-only
root filesystem. So I went through and did a small amount of
editing to just clean up some loose text.
(From yocto-docs rev: 1b3674a5d123e74748bce5de61722079d4740908)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The LIC_FILES_CHKSUM was out of date due to a merge in poky.
I updated the single instance in the manual set to use the new
hash.
Reported-by: Richard Purdie <richard.purdie@intel.com>
(From yocto-docs rev: 4cfdf391326f2c5750404a8d7f31999f75bc26fe)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
You really are not compiling the recipe.
(From yocto-docs rev: 82ca9176375c34f3c5b6694b0f205794684a2f01)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I commented this out based on Paul Eggleton's suggestion that
we should not be presenting this information.
(From yocto-docs rev: fe2ee21e42134f0ffc9347f8c0336169f8f52aa6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Merged the concepts in the old "Adding a Package to your Software"
section into the new "Writing a New Recipe" section. This completes
the feedback from Paul, which was extensive for this new section.
(From yocto-docs rev: 522673e1aa068b8d089dfefb5b234a48062da3fb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change merged in the Hello World section as a summarizing
example section to the new "Writing a New Recipe" section.
(From yocto-docs rev: 79c858e1590e5ab4c56b19dc51b03e0e570b6209)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This involved a first draft and implementation of Paul's review
comments. Also worked on the "Configuration" section.
(From yocto-docs rev: 0e168dbaf5f4949c4c5f79fe7da406ca91390e22)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the recipe creation figure. I had to re-order the flow
and also generalize the supporting services installation part of the
diagram.
Fleshed out the "Fecthing" section with SRC_URI examples and much
more detail.
(From yocto-docs rev: 6a23ab2beb90376c11c426ac8bf5618994585a9d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have added some stuff to the section on fetching source in the
new "Writing a Recipe" section.
(From yocto-docs rev: a4b340d58888927bf648be34402670f8a7d87d8b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This draft has the structure with text from Paul's email. It
needs further work.
(From yocto-docs rev: 08025edc34995f7436786e9ed3abdfa155db47af)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From yocto-docs rev: c031c014bae6d6e4a239a4bcd1e8b9d5d272f851)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Created a new figure for the flow. This involved putting the figure
into the "Figures" directory of both the dev-manual and the mega-manual
and then updating Makefile to include the figure in the TARBALL
variable.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a link to the PRSERV_HOST variable. That variable is
now defined in the ref-manual variable glossary.
(From yocto-docs rev: 7166fe94107cd379081fd81b7351ec081aa2c6ae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As an actual example of using AUTOREV, refer the reader to the
Yocto-supplied poky-bleeding distribution.
Also cleaned up some wording and added a Caution statement
about the distro not being regularly tested - Scott
(From yocto-docs rev: 2a74573af702c905274e377304a946fd335a0182)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
i'm still looking at the dev manual for more changes but those would
be more substantive changes, so i'll pass along just this collection
of minor stuff.
(From yocto-docs rev: 94e2422d6e6e408e2dd76b15e1231814b123800d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This now involves only making sure that "packag-management" is not
part of your IMAGE_FEATURES statement for the image.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 9cb66c40677adc43088d22900fef58166ee8b508)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the intro text for this one-line example so that it
would not imply that the example is the only syntax that can
get the job done.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 5d0151b692bef9ef67a6237f3e4e4387e6f00c63)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a small note in the section where you create your own
distribution to be clear about where the name is set.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: a2ce7d82eb7f3edbaebce65c73e6ae3c0c921152)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than saying menuconfig is "built", I changed the text to say
it is "run."
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 74b7a193e8356931e5a0db2ea76b4543880ed2ec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The four sub-sections describing how to customize an image seemed
to be backwards as they progressed from most complex to easiest.
I switched up the order and provided better transitional
introductory wording for the four sub-sections.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 1e8d178c401d3020621fc90af5cdd0bb3e37be87)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I noticed that chapter 10 of the ref-manual still had
"Reference: Features" as the title. This is left over from way
back. I changed that chapter title to "Features." Next, I
noticed an inconsistency with some sub-section titles.
I changed the "Images" title into "Image Features." This affected
several links across the doc set so I had to update those
cross-references as well so they have the latest section title
as part of the reference.
(From yocto-docs rev: b68f009a92e0e24802e367d98cf66e15ba1cd364)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The operator used was "=" which was inconsistent in light of
previous uses of the variable in the ptest section. I changed the
operator to "+=" to be consistent.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: d6b7c7e15290e64f4baac25544224788e92ad309)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After adding "Package Group" definition as the original "Task"
definition, we needed to create a new definition for the term
"Task".
(From yocto-docs rev: b6eae9242bf488d3f086e496b52d8422ad31feb6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: faa7206b2f67a26c1366fe997cd092aed7e9f85e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the note indicating that three specific recipes were
"ptest-enabled" for the release. I substituted in wording that
tells the user to see if a a recipe inherits ptest as a way
of determining if the receipe is ptest-enabled.
(From yocto-docs rev: 9136617575eb7a0a08f0b81f75ae6cdede62219f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the wording so that it reflects better what is actually
going on when use IMAGE_INSTALL to afect an image.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 243588460fb76a0c333772e3dce566cf664397ee)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
given the length of chapter 5 in the dev manual, i'm going to do
this in bite-size pieces.
(From yocto-docs rev: ccfe3e719bf71236e50b3e4507a6d63199f24ff5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* is it technically correct to say there are now 5 BSPs? as in, does
genericx86-64 count as a new BSP distinct from genericx86? [aside: are
there any plans for a MIPS64 BSP?] - rpjday
MIPS64 is under development. - scottrif
* if scott is up for it, a couple more variables for the variable
glossary might be BASE_WORKDIR and TARGET_VENDOR, which i would have
added to that variable list but they don't appear in the glossary
- rpjday
Noted. - scottrif
(From yocto-docs rev: fae6f8baebedaa72f5e37b4f1a39a9accf9b196c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
scott (or anyone else) is welcome to use any or all of this, or
tweak to taste. i have a few other concerns with ch 2 but i'll read it
more carefully to make sure i'm reading it correctly. - rpjday
I implemented all but the addition of MIPS64 as it is not tested
using the autobuilder yet. - scottrif
(From yocto-docs rev: 927ff9be66a7471a33faf18a1122ce8b2bd21805)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The examples went stale. Two out of three did not work. I have
provided new examples that work.
Reporte-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 0a3695f3f6a5b31617f4a5da960677f87733b825)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed wording to remove implications of meta-intel clone
importance regarding working with BSPs.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: e5f80aadf6f651af6efae6e99d0a4d9b6e76fc99)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was inconsistent use of the way directory names were
handled throughout the YP documentation. I have scrubbed the
set and replaced many instances such as the following:
meta/<something> replaces /meta/<something>
poky replaces ~/poky (except in some very specific examples)
I basically got rid of leading slash characters.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: ae2e451ed8f61484d04b30017021912c4493a441)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5408]
Added a cross-reference link for this variable into the glossary.
(From yocto-docs rev: a6f4935b60222a97a5fe03a538a3f8042e18d3f6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5408]
The developer's manual should only refer to functionality which
is available in oe-core. Currently, this passage requires the
user to add a package from, and use facilities of, meta-oe. This
fix describes how to use facilities in oe-core to the same end.
(From yocto-docs rev: 2dfaa88ae4760f86dbbdc8b58de7feba25a8014a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5203]
This was reviewed by Alex and an ordering change was needed due
to the order of how things are created during the workflow.
(From yocto-docs rev: 0c630fed9f9a609c1ca13359efe47cad6f60e00b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partial fix for [YOCTO #4414]
I put in the API stuff as well as made sure the other comments
for the dora-toaster branch and temporariness of the GUI were
mentioned. Probably more tweaks before this section settles
out.
(From yocto-docs rev: 4df966bb21a014b8fcac69abb7b912e109089606)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partial fix for [YOCTO #4414]
Got some feedback on the section and added a step that the user
needs to checkout the dora-toaster branch after clonine poky.
Also, that the Django version is specific and not the listed
version +. Finally, a bit of wording to note that the GUI is
temporary for this release.
(From yocto-docs rev: 775d55f33a4dfbb21db896b81159e16ee7e16034)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The meta-yocto-bsp/conf/layer.conf example had gone stale.
I updated it.
(From yocto-docs rev: bf77d70789f85400e2d6be7e4e32475506183217)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This site has disappeared and I don't think there is a
replacement.
(From yocto-docs rev: 711488b664e1da7f3a4c64af3fbd4012bfb44d56)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partial fix for [YOCTO #5368]
Updated the figure to not have the tarball method in there
for setting up poky repo locally. Also, added specific references
to the environment setup scripts.
(From yocto-docs rev: 7c6ececaf8eb987206567077f42213dbe4cdc4f2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
