files in wic tmp directory can be usefull for debugging, so do not remove
tmp directory when wic create run with debugging mode (-D or --debug).
also update wic.Wic.test_debug_short and wic.Wic.test_debug_long to
check for tmp directory.
[YOCTO#14216]
(From OE-Core rev: a122e2418b67d38f691edcf8dd846c167d6b4fa9)
Signed-off-by: Lee Chee Yang <Chee.Yang.Lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The fix for [Yocto #13994] required the rootfs directory to be copied
(using hardlinks if possible) when modifying the fstab file under wic.
We can optimise this copy away for filesystems where we have the tools
to modify the contents of the partition image after it is created. For
ext2/3/4 filesystems we have the debugfs tool and for msdos/vfat
filesystems we have the mcopy tool. So for any of these filesystems we
skip the modification of the fstab file in the rootfs directory (and
skip the associated copy unless it is otherwise necessary) and update
the contents of fstab directly in the partition image.
(From OE-Core rev: 5fb8ae0e9159597d7eaa9307a3a8543800bf9405)
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default, wic updates the /etc/fstab in the rootfs to include details
of additional partitions described in the selected wks file. If this
modification is performed in place, other tasks which create an image
file from the rootfs directory (e.g. do_image_tar and do_image_ext4)
will pick up the modified fstab file which would not be appropriate for
those images as they do not include the additional partitions described
in the wks file. wic does undo modifications to the fstab file once it
has finished creating the filesystem image, however this leaves open a
race condition if one of the other tasks reads the contents of the fstab
file from the rootfs directory between the point where wic modifies the
fstab file and the point where wic restores the files original content.
This could be solved by adding a lockfile for tasks which use the rootfs
directory to ensure that no other such task is reading the rootfs
directory while do_image_wic is running. This would serialize several
do_image_* tasks and result in slower builds, especially for large
images. Another drawback of this solution is that it is hard to
selectively optimise - adding lockfiles to do_image_* tasks would result
in these tasks always being serialized even if no fstab modification
will take place.
An alternative solution is to copy the rootfs directory when fstab needs
to be modified. The code to do this in wic already exists as it is
needed when including or excluding content in the rootfs. This still
results in an impact on build times but the copy uses hardlinks if
possible (so little data is actually copied) and we can make selective
optimisations to improve things. The rootfs copy will only take place if
fstab modification is required (or if it was already needed to include
or exclude rootfs content). We can also follow up with further
optimisations after this commit. So this second solution is chosen.
Fixes [Yocto #13994]
(From OE-Core rev: ce682a73b7447652f898ce1d1d0416a456df5416)
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To exclude content from the rootfs, wic makes a copy (using hardlinks if
possible) of the rootfs directory and associated pseudo db, then removes
files & directories as needed. However if these files and directories
are removed using the python functions os.remove and shutil.rmtree, the
copied pseudo db will not be updated correctly. For files copied from
the original rootfs, if hardlinks were used successfully when copying
the rootfs this should mean that the relevant inodes can't be reused and
so the risk of pseudo aborts should be avoided. However, this logic
doesn't apply for directories (as they can't be hardlinked) or for files
added via the '--include-path' argument (as they weren't present in the
original rootfs) and so there remains some risk of inodes being reused
and the pseudo db becoming corrupted.
To fix this, use the 'rm' command under pseudo when removing files &
directories from the copied rootfs to ensure that the copied pseudo db
is updated.
(From OE-Core rev: d5db7e268947f0392c2126137571a44acd29ccd6)
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a path is specified for the internal wic working directory using
the -w/--workdir argument then it must not already exist. Re-using a
previous workdir could easily result in rootfs and intermediate files
from a previous build being added to the current image.
(From OE-Core rev: 2e40c8d4109024ff704c5ce40d98050ca7f34dd5)
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows the path for the temporary workdir used by wic to be set
when running wic from bitbake or directly from the command line.
(From OE-Core rev: 2e7314ac3a3cab89de93c932e8efc75de0feb0a7)
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
vfat/msdos filesystem should have fsuuid in format 0xYYYYYYYY where "0x"
in front follow with 8 hexadecimal number in uppercase. In wic, when using
custom fsuuid for vfat/msdos partition in wks, it is able to set the value
in any length, with or without leading "0x". This can cause fsuuid
missaligned when fstab updates, fstab expect exactly 10 character
fsuuid for vfat/msdos partition and all in uppercase.
if custom fsuuid for vfat/msdos is set, check the length and format,
error if it exceed the format size. Amend it so it is align with format
0xYYYYYYYY. This is done before image create and fstab update to ensure the
fsuuid are same in all followup process. if custom fsuuid length less than
expected, fill in "0".
[YOCTO #14161]
(From OE-Core rev: d9686ae511ef10a504becfd81bfe296b788e1456)
Signed-off-by: Lee Chee Yang <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The empty wic plugin is used to create unformatted empty partitions for wic
images.
To use it you must pass "empty" as argument for the "--source" parameter in
the wks file. For example:
part foo --source empty --ondisk sda --size="1024" --align 1024
Also adds a selftest for this plugin where the 'Fstype' column from 'wic
ls' should be empty for the second partition as listed in
test_empty_plugin.wks.
(From OE-Core rev: 77d174fc80663403ef76c5b808aafc1117d3545c)
Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add "payload_dir" parameter so user can add other files/dirs
to the ISO.
(From OE-Core rev: bbe84a33c81066fee96dd28a4009d8404b51e642)
Signed-off-by: Chaitanya Vadrevu <chaitanya.vadrevu@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to recent changes in bootimg-efi to include IMAGE_BOOT_FILES,
when both bootimg-partition and bootimg-efi occur in a single .wks
and IMAGE_BOOT_FILES are defined, files listed in IMAGE_BOOT_FILES
will be duplicated in both partition.
Since IMAGE_BOOT_FILES are crucial for bootimg-partition, but
optional for bootimg-efi, hence allowing bootimg-efi to have the option
to ignore it.
The new variable, IMAGE_EFI_BOOT_FILES, was added to help handle this
issue. Its basic usage is the same as IMAGE_BOOT_FILES.
Usage example:
${IMGDEPLOYDIR}/${IMAGE_BASENAME}-${MACHINE}.ext4;rootfs.img \
This commit is also squashed with the updated testcase to cover for
this change.
[YOCTO #14011]
(From OE-Core rev: 945339e06b273df1935cfd784f548ef57e0b7f4c)
Signed-off-by: Khairul Rohaizzat Jamaluddin <khairul.rohaizzat.jamaluddin@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allows the --offset argument to use the "s" or "S" suffix to specify
that it is reporting the number of 512 byte sectors.
This is required for some SoCs where the mask ROM looks for an item at a
sector that isn't aligned to a 1KB boundary.
(From OE-Core rev: 938595d1dc4abaf5f7f3a7900add3f0492b805d0)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
List of files defined using IMAGE_BOOT_FILES are installed into
the boot partition when preparing an image using the wic tool with
the bootimg-efi source plugin.
The code snippet introduced is taken as is from bootimg-partition.py
Change-Id: I8dbb6b4e7c24870f587a6f31e6ae4a87d7033782
Issue-Id: PLATFORMS-3134
(From OE-Core rev: a44ab3a4ee5b3c57812909c6194456f299d6ba7f)
Signed-off-by: Khasim Syed Mohammed <khasim.mohammed@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The error message was reporting the calculated offset instead of the
current offset, which made it confusing.
(From OE-Core rev: 2be775cfe1b49ce3889b5dc326e2b67a9667f18a)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support for an --offset argument when defining a partition. Many
SoCs require that boot partitions be located at specific offsets. Prior
to this argument, most WKS files were using the --align attribute to
specify the location of these fixed partitions but this is not ideal
because in the event that the partition couldn't be placed in the
specified location, wic would move it to the next sector with that
alignment, often preventing the device from booting. Unlike the --align
argument, wic will fail if a partition cannot be placed at the exact
offset specified with --offset.
Changes in V2:
* Fixed a small typo that prevented test_fixed_size_error from passing
(From OE-Core rev: 467f84e12b96bc977d57575023517dd6f8ef7f29)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Combine all the common path validation in a function to avoid code
duplication.
Cc: Paul Barker <pbarker@konsulko.com>
(From OE-Core rev: ebd12b10d17db0b4176b0188407d7e9b8420eab1)
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow specifying an optional destination to include-path and make the
option aware of permissions and owners.
It is very useful for making a partition that contains the rootfs for a
host and a target Eg:
/ -> Roofs for the host
/export/ -> Rootfs for the target (which will netboot)
Although today we support making a partition for "/export" this might
not be compatible with some upgrade systems, or we might be limited by
the number of partitions.
With this patch we can use something like:
part / --source rootfs --fstype=ext4 --include-path core-image-minimal-mtdutils export/ --include-path hello
on the .wks file.
Cc: Paul Barker <pbarker@konsulko.com>
(From OE-Core rev: e8c21c6ebaebde88151697381bdb2452f1171090)
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If an excuded path does not exist, continue without an error.
This allows to seamleasly reuse .wks among different projects.
Eg:
part / --source rootfs --fstype=ext4 --exclude-path=opt/private_keys
Where /opt/private_keys in only populated by some of the image.bb files.
Cc: Paul Barker <pbarker@konsulko.com>
(From OE-Core rev: 2dbd692b8e563cf991fb4ae1ef6129fda0d7e3c4)
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This option allows to specify which part of a rootfs is going to be
included, the same way the -C argument on tar.
Thanks to this option we can make sure the permissions and usernames
on the target partition are respected, and also simplify the creation of
splitted partitons, not neeting to invoke external vars or using .wks.in
files. Eg:
part / --source rootfs --ondisk sda --fstype=ext4 --exclude-path=etc/
part /etc --source rootfs --fstype=ext4 --change-directory=etc
Cc: Paul Barker <pbarker@konsulko.com>
(From OE-Core rev: 2265d089a58e1f78f26d623ee667c420cb1c3bd4)
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When parameters include_path or exclude_path are passed to the rootfs
plugin, it will copy the partition content into a folder and make all
the modifications there.
This is done using copyhardlinktree(), which does not take into
consideration the content of the pseudo folder, which contains the
information about the right permissions and ownership of the folders.
This results in a rootfs owned by the user that is running the wic
command (usually UID 1000), which makes some rootfs unbootable.
This bug can be easily triggerd with the following .wks
part / --source rootfs --fstype=ext4 --exclude-path=home
And this sequence:
$ wic create test-permissions -e core-image-minimal -o test/
$ sudo mount test/test-permissions-202004080823-sda.direct.p1 /mnt
$ ls -la /mnt/etc/shadow
To fix this we copy the content of the pseudo folders to the new folder
and modify the pseudo database using the "pseudo -B" command.
If the rootfs is not a rootfs generated by bitbake a warning is shown
making the user aware that the permissions on the target might not match
what he expects.
WARNING: /tmp/test/../pseudo folder does not exist. Usernames and permissions will be invalid
Cc: Paul Barker <pbarker@konsulko.com>
(From OE-Core rev: fd739c15cdba221d9d497d3402b7d929c0be2ca4)
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 36993eea89d1c011397b7692b9b8d61b499d0171.
After discussion on the mailing list it was felt these changes
were not ready yet.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit efdcf94801f6abe8e4099e324d9a3deccd8d4384.
After discussion on the mailing list it was felt these
changes were not ready yet.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This option adds the content of a rootfs on a specific location on the
rootfs.
It is very useful for making a partition that contains the rootfs for a
host and a target Eg:
/ -> Roofs for the host
/export/ -> Rootfs for the target (which will netboot)
Although today we support making a partition for "/export" this might
not be compatible with some upgrade systems, or we might be limited by
the number of partitions.
With this patch we can use something like:
part / --source rootfs --embed-rootfs target-image /export --embed-rootfs target-image2 /export2
on the .wks file.
(From OE-Core rev: efdcf94801f6abe8e4099e324d9a3deccd8d4384)
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When parameters include_path or exclude_path are passed to the rootfs
plugin, it will copy the partition content into a folder and make all
the modifications there.
This is done using copyhardlinktree(), which does not take into
consideration the content of the pseudo folder, which contains the
information about the right permissions and ownership of the folders.
This results in a rootfs owned by the user that is running the wic
command (usually UID 1000), which makes some rootfs unbootable.
To fix this we copy the content of the pseudo folders to the new folder
and modify the pseudo database using the "pseudo -B" command.
(From OE-Core rev: 36993eea89d1c011397b7692b9b8d61b499d0171)
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
extended partition should reserve at least 2 unallocated sectors
between the start of the extended partition and the start of a
logical partition.
[YOCTO #13658]
(From OE-Core rev: 884c8a0e50a49bdca5e048197a9dc0ff37cc8d1a)
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OE wic plugins create temporary file with the index of the line
tmp file name. This causes race in case several builds run in time.
If source_params['file'] is an absolute path, the cr_workdir prefix
is not applied by os.path.join(). So instead it writes to a ".1"
file next to the original image - this is outside the WORKDIR
and at risk of collision.
(From OE-Core rev: c68d8a37ba4348fe1c0e75c63b5668187d326ec2)
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Suggested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Suggested-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This option adds the contents of the given path to a partition built
with the rootfs source plugin. The path is relative to the directory in
which wic is running not the rootfs itself so use of an absolute path
is recommended. This option is most useful when multiple copies of the
rootfs are added to an image and it is required to add extra content to
only one of these copies. This option only has an effect with the
rootfs source plugin.
(From OE-Core rev: d4cd27a9837426e809190548a83c6c7c76505114)
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When debugging issues or trying to add new features in wic it's useful
to examine the intermediate files created by the tool such as images of
the individual partitions. Previously these files were created in a
subdirectory of IMGDEPLOYDIR and, deleted by wic itself and then the
working subdirectory completely removed at the end of IMAGE_CMD_wic.
Instead we should work in a staging directory named build-wic and leave
behind intermediate files for analysis if necessary.
This has the added benefit of allowing individual partition images to
be preserved by adding commands to IMAGE_CMD_wic_append() in an image
recipe if needed. This is useful where an update system requires exact
sized and pre-formatted partition images for deployment.
(From OE-Core rev: 07b6b284204e912b5d08bdd0ca51b766ab7dd9c1)
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add "esp_extra_blocks" plugin parameter so that caller may change
ESP's free space from the default 100 blocks.
(From OE-Core rev: db4be094b0d6741ca4f9e2cbb499fc9c224fa690)
Signed-off-by: Haris Okanovic <haris.okanovic@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the source file is located in a subdirectory of DEPLOY_DIR
rawcopy will currently fail in sparse_copy function on
open(dst_fname, 'wb'), as the parent directory for destination
file does not exist.
This patch helps to avoid that by recursively creating
parent directories.
(From OE-Core rev: 073c435644091c2801e45c6d02afa917de575082)
Signed-off-by: Eugene Smirnov <evgenii.smirnov@here.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When wks describes extra partitions that aren't in the partition
table (e.g. boot loader) and exactly four primary MBR partitions, the
last partition gets added to fstab as partition #5 instead of #4.
[YOCTO #13560]
(From OE-Core rev: 7537580b3dd21bd512fb26e56e92b6553c549fa8)
Signed-off-by: Michael Cooper <michaelcooper81@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to create a msdos partition table disk image that can auto
expand after the image is copied to an SD card, wic needs the ability
to have a primary partition as the last entry. The desired use case
is to be able to create an A/B update partition image scheme with a
/var volume that can be auto expanded to the remainder of the SD card
at run time.
The typical .wks file will look similar to the following:
bootloader --ptable msdos
part / --source rawcopy --sourceparams="file=u-boot.imx" \
--ondisk mmcblk --no-table --align 1 --size 1
part /boot --source bootimg-partition \
--ondisk mmcblk --fstype=vfat --label boot --active --align 4 --size 16
part / --source rawcopy --sourceparams="file=imx6_boot.otaimg" \
--ondisk mmcblk --fstype=ext4 --label otaboot --align 4 --type logical
part / --source rawcopy --sourceparams="file=imx6.otaimg" \
--ondisk mmcblk --fstype=ext4 --label otaroot --align 4 --type logical
part / --source rawcopy --sourceparams="file=imx6_boot.otaimg" \
--ondisk mmcblk --fstype=ext4 --label otaboot_b --align 4 --type logical
part / --source rawcopy --sourceparams="file=imx6.otaimg" \
--ondisk mmcblk --fstype=ext4 --label otaroot_b --align 4 --type logical
part /var --source rawcopy --sourceparams="file=imx6_var.otaimg" \
--ondisk mmcblk --fstype=ext4 --label fluxdata --align 4
Without the patch applied, wic will generate an SD card image that looks like:
Disk boot.img: 890940s
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 2056s 48001s 45946s primary fat16 lba
2 48008s 132467s 84460s primary ext4
3 132472s 454467s 321996s primary ext4
4 454471s 890939s 436469s extended lba
5 454472s 538931s 84460s logical ext4
6 538936s 860931s 321996s logical ext4
7 860936s 890939s 30004s logical ext4 boot
With the patch applied a primary partition can be created at the end
of the image which can be expanded to fill the free space on the media
where the image has been copied, which looks like:
Disk boot.img: 890940s
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 2056s 48001s 45946s primary fat16 lba
2 48007s 860931s 812925s extended lba
5 48008s 132467s 84460s logical ext4
6 132472s 454467s 321996s logical ext4
7 454472s 538931s 84460s logical ext4
8 538936s 860931s 321996s logical ext4
3 860936s 890939s 30004s primary ext4 boot
(From OE-Core rev: 56add7cc547e0113cdf980579d1421b14cc233e5)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a source plugin that support both EFI and legacy PC-Bios.
While using this plugin, both bootloaders configurations reside
in the same /boot partitions.
This plugin has very little code : to avoid code duplication,
we simply re-import bootimg-pcbios and bootmg-efi source and
call both their SourcePlugin methods.
(From OE-Core rev: c8545d54139c6c48bffd1dd1d39d79891626c6f7)
Signed-off-by: William Bourque <wbourque@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 450335ba5e73a375eb9932b4c4cf37979640dbfc copies the pseudo
database to the working directory in order to have ownership information
when the filesystem is generated.
Unfortunately this does not work anymore. The filenames on the database
are absolute and there is no information about the new directory.
Instead of fixing the database, we could redo a bit the way we patch the
fstab file. Now I am saving the old contents of fstab, modifying the
file and then reverting the changes on exit.
This is faster than the previous approach, although it can cause
indeterminism if the application is killed before finishing.
(From OE-Core rev: dcbf7b864dd1713b54a172d8714ce1508482f086)
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
when INITRAMFS_IMAGE_BUNDLE and INITRAMFS_IMAGE are set, wic should
look for kernel with initramfs image bundled.
Include required variable MACHINE, INITRAMFS_IMAGE_BUNDLE,
INITRAMFS_IMAGE, INITRAMFS_LINK_NAME and KERNEL_IMAGETYPE in WICVARS.
No longer require default value for variable kernel as KERNEL_IMAGETYPE
is not optional variable and included in WICVARS.
image_types_wic to inherit kernel-artifact-names to obtain default
INITRAMFS_LINK_NAME when INITRAMFS_IMAGE_BUNDLE are set.
update wic.Wic2.test_image_env test case to filter optional
variable INITRAMFS_LINK_NAME, INITRAMFS_IMAGE and INITRAMFS_IMAGE_BUNDLE.
(From OE-Core rev: bac984fbb2d5ad5d13ba3275c8a3e878d8753c58)
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow plugin bootimg-efi to configure with multiple initrd
through source parameter.
Uses ; to separate each initrd.
e.g:
--sourceparams="loader=${EFI_PROVIDER},initrd=initrd1;initrd2"
(From OE-Core rev: c7b0823f9ab6a9959aaa809b8c3f70d199feb64d)
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
replaced hardcoded kernel image with KERNEL_IMAGETYPE.
set kernel image to "bzImage" incase KERNEL_IMAGETYPE not set.
(From OE-Core rev: 88a9fef761c5e67b2964fedc85a7e8ad37067564)
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add new source parameter label to allow custom boot.conf/grub.cfg label,
so far it's hardcoded to "Boot".
Default label to "Boot" for systemd-boot and blank for grub-efi when source
parameter label are not set.
(From OE-Core rev: 7a0aab1aa31e66e6bc94c04c2f6c1043b64a8967)
Signed-off-by: Chee Yang Lee <chee.yang.lee at intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
volume name should refer to --label in .wks.
Replace the hardcoded volume name with label.
set "ESP" as default name when no lable specified.
(From OE-Core rev: 5621aceaf39ef0dc097b16c83e73b9882c987a7c)
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds SPDX license headers in place of the wide assortment of things
currently in our script headers. We default to GPL-2.0-only except for the
oeqa code where it was clearly submitted and marked as MIT on the most part
or some scripts which had the "or later" GPL versioning.
The patch also drops other obsolete bits of file headers where they were
encoountered such as editor modelines, obsolete maintainer information or
the phrase "All rights reserved" which is now obsolete and not required in
copyright headers (in this case its actually confusing for licensing as all
rights were not reserved).
More work is needed for OE-Core but this takes care of the bulk of the scripts
and meta/lib directories.
The top level LICENSE files are tweaked to match the new structure and the
SPDX naming.
(From OE-Core rev: f8c9c511b5f1b7dbd45b77f345cb6c048ae6763e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes the users might want to change the title showing on UEFI
booting screen, so far it's hard-coded to 'boot'.
There is not a easy way to customize it in current design, I tried
firstly with '--configfile', but that does not work with --use-uuid,
since the later option will generate a UUID and write it to boot
config, only when the former option is not enabled.
So a new source parameter 'titile' is added in this patch, it defaults
to 'boot' to be consistent with the original title.
(From OE-Core rev: 37e16188ef3b1b328eb18b3e459c051c9c9f0332)
Signed-off-by: Ming Liu <liu.ming50@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It fails to build multilib image such as lib32-core-image-minimal with
wic by set 'IMAGE_FSTYPES = "wic"':
| ERROR: Couldn't find correct bootimg_dir, exiting
When multilib is enabled, STAGING_DATADIR is expanded with MLPREFIX. But
dependencies of images such as syslinux is still populated to nonarch
STAGING_DATADIR.
Search nonarch STAGING_DATADIR to fix the error.
(From OE-Core rev: dbae9a6f9a1c6cc7d4dd680d7bbda3dfa40f3491)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because the find | cpio processes execute in parallel connected via
the pipe, and the cpio outputs in the same dir find searches for
source files, the cpio will be included in itself partially, depending
on how fast the build machine creates the cpio file before cpio
gobbles it up.
This bloats the ISO image, though compression reduces the .iso file size,
once the kernel decompresses the cpio image and boots it live, it uses
up to double the RAM memory.
Fix this by creating the initrd.cpio file directly inside cr_workdir.
(From OE-Core rev: 7a7b29f5f1392f4f87af4f20cda99c66b4789fde)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We can use this parameter to make the wic use the label to name a
partition in /etc/fstab.
(From OE-Core rev: 51638edaa00befaed58e2def255d46ae44d9234f)
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
initrd.cpio is created in initrd_dir, not in cr_workdir. Gzip will
let initrd.cpio uncompressed if the path is not found.
Also, grub_image variable doesn't exist, grub_src_image should
be used instead.
(From OE-Core rev: c88875b568a66297b1d3df380c590f20796c57f6)
Signed-off-by: Alexandru Vasiu <alexandru.vasiu@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Only bsdcpio works with numbers for option -R to specify user:group,
while GNU cpio doesn't. Debian use GNU cpio so without this change,
you cannot create ISO images without installing bsdcpio.
(From OE-Core rev: 7c6ba368006ca94ecc0daac7b1c5e0fbe4236daf)
Signed-off-by: Alexandru Vasiu <alexandru.vasiu@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Automatically select one kernel type image based on a predefined
precedence list if there are multi kernel images installed.
(From OE-Core rev: d1d80566681d4cdc00aa3d4b5e4bcf5edb7132b7)
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support to specify a custom extlinux.conf via something like:
bootloader --configfile="extlinux.conf"
(From OE-Core rev: 33f85c8bf80d70f00eeccd9ab3dfa417c0fc7df1)
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By leveraging the distro boot command feature in the u-boot, we can
compose the corresponding extlinux.conf when creating the wic image,
and let u-boot boot the kernel automatically. For more detail about
the u-boot distro boot command feature, please see doc/README.distro
in u-boot source files.
(From OE-Core rev: bdf8ae540af12ecc9ad60efd3651b0f71d12d3bd)
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We want to add some u-boot specific config file. Before doing this,
we need know what files will be installed into this partition. So
move the codes about parsing the IMAGE_BOOT_FILES into
do_configure_partition(). No function change.
(From OE-Core rev: 3203037471c761f635d1f1c512cb623ff6977a41)
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There's no reason to have that rootfs.img filesystem in the image:
it's not used for anything because both the EFI and legacy boot paths
use the /initrd which contains the same contents as the rootfs.img,
only compressed. It was probably forgotten in there :)
My iso went down from 224 to 94 mb.
Tested using UEFI/legacy boots on CD-roms, usb dongle and qemu VM's.
(From OE-Core rev: 4c784379524cb12807ef87a02ef1514ed45c1cc3)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's really good that OE supports multiple EFI_PROVIDERs and that
commit 9a1709278de87 ("wic: isoimage-isohybrid: use grub-efi from
deploy dir") makes re-use of the grub-efi built image, but we should
still respect the standard otherwise the ISO will not boot, so install
grub images as boot[x64|ia32].efi not ${PN}-boot[x64|ia32].efi.
(From OE-Core rev: 1608129692d92c239b5fb9244b649a32b9009254)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make sure that we're able to use the initrd value specified in the wks
file when using grub-efi bootloader with bootimg-efi wic plugin.
Fixes [YOCTO #12689]
(From OE-Core rev: f1d5bb1f21e11714357aff4ae7e52421e3756c5a)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This changes the output of "wic create mkefidisk -e core-image-sato" from:
The following build artifacts were used to create the image(s):
ROOTFS_DIR: /media/build1/poky/build/tmp.wic.ybraavmb/rootfs_copy
to:
The following build artifacts were used to create the image(s):
ROOTFS_DIR: /media/build1/poky/build/tmp/work/qemux86_64-poky-linux/core-image-sato/1.0-r0/rootfs
which s much less confusing for the user.
[YOCTO #12564]
(From OE-Core rev: a4941af2d3624aecc5dcd7ff54b7ea8c9e9dee8b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The partition plugin is used as the base for other plugins.
One of the methods the plugins use, is the prepare_rootfs
method.
The prepare_rootfs method wrongly assumes that the value
ROOTFS_SIZE from bitbake datastore is relevant to every
invocation of prepare_rootfs, which it clearly is not, for
example in the bootimg-partition case.
This commit adds an optional argument to prepare_rootfs
where a caller can tell prepare_rootfs if it is an actual
rootfs and whether related rootfs information retrieved from
bitbake is valid. The default behavior of this optional
argument is to assume that the invocation is an actual
rootfs, to maintain compatibility with previous
implementations.
(From OE-Core rev: 654d72d55194ec41bc1aacfcc6b2c8c9a305b042)
Signed-off-by: Paulo Neves <ptsneves@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
First, allow for wic to be given a filesystem UUID to be used when
creating a filesystem. When not provided, wic will generate the UUID to
be used. Next, when --use-uuid is passed, we update the fstab to mount
things via UUID (and if not found, then use PARTUUID) as UUID is more
portable.
(From OE-Core rev: 9256b8799495634ee8aee5d16ff71bd6e6e25ed4)
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The '--label' argument should work for '--source rawcopy' as it does for
'--source rootfs', so add a method in RawCopyPlugin to update the label
on the temporary filesystem images.
(From OE-Core rev: 303d6ca5ae986acd2e633b0dc5e386ee7771f8ab)
Signed-off-by: Martin Hundebøll <mnhu@prevas.dk>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we have been told to use the UUID we should also update the fstab
to make use of PARTUUID instead of hard-coding the device in question.
This will make the resulting image much more portable.
(From OE-Core rev: e7443e7cf876d9bbe326033ac5eee0b98ce5d37f)
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The WIC's 'part' can now give a name for GPT partition in WKS file.
It's similar to '--label', but is naming partintions instead file systems.
It's required by some bootloaders to partitions have specified names.
(From OE-Core rev: 9b60e3466ed7cff0cea10815851eb1304002eb52)
Signed-off-by: Artur Mądrzak <artur@madrzak.eu>
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create an option to wic doesn't change fstab file, the final
fstab file will be same that in rootfs and wic doesn't update
file, e.g adding a new mount point.
Users can control the fstab file content in base-files recipe.
This is useful if you want to only create an partition but not
add fstab mount point or add new mount point using label e.g:
LABEL=recovery /recovery auto defaults 0 1
(From OE-Core rev: 00420ec42140c1b752132bda190dede85756d157)
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It can be useful to have multiple partitions with '--source bootimg-partition'
but different content.
E.g. for TI AM335x, one boot partition can contain an first stage
bootloader ("MLO"), while the real bootloader and kernel plus devicetree
are in another one.
Patch allows to specify multiple IMAGE_BOOT_FILES with optional "_label-XXX"
or "_uuid-XXX" overrides.
E.g. with this patch, a .wks file with
| part --source bootimg-partition ... --label=mlo --active
| part --source bootimg-partition ... --label=boot0
| part --source bootimg-partition ... --label=boot1
and a recipe with
| IMAGE_BOOT_FILES_label-mlo = "\
| MLO-${MACHINE}.img;MLO \
| "
|
| IMAGE_BOOT_FILES_label-boot0 = "\
| u-boot-${MACHINE}.img;u-boot.img \
| zImage \
| "
|
| IMAGE_BOOT_FILES_label-boot1 = "${IMAGE_BOOT_FILES_label-boot0}"
|
| WICVARS += " \
| IMAGE_BOOT_FILES_label-mlo \
| IMAGE_BOOT_FILES_label-boot0 \
| IMAGE_BOOT_FILES_label-boot1 \
| "
is possible. It will create one partition with the MLO and two redundant
ones with the uboot + kernel.
(From OE-Core rev: 8c1dec627e9735260516fe8f0b2bfdb0ee70172b)
Signed-off-by: Enrico Scholz <enrico.scholz@ensc.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modified wic code to run bmaptool using native Python3
from wic-tools native sysroot.
[YOCTO #11891]
(From OE-Core rev: 7fca44e03130c0860cc5df2093902773f426c774)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This should reduce the chance of generating 0xffffffff as the disk
system identifier.
(From OE-Core rev: 5619e72facbc9228d3cf8f844f198e03b536ac8c)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Zero may be interpreted as no MBR signature present and another
partitioning program might install a new MBR signature.
(From OE-Core rev: f53b5555d6eaa171bc5882cfee807cf62576862d)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic avoided adding /boot to fstab for no reason.
This exception was hardcoded in the wic code.
There is no need for this as mountpoint in .wks file is an optional
field. It can be used only if user wants to have partitions
automatically mounted on system boot.
[YOCTO #11662]
(From OE-Core rev: 2376b05512ddb8c4ec3aaf1df11071f536a76bd9)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used unique suffix (line number from .wks file) for the
copied rootfs directory to avoid possible conflicts.
(From OE-Core rev: 01efc234a8caab67ed3138ab2de9bbd82ce97b44)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic gets rootfs paths from partition object property
'rootfs_dir' and shows them in final report.
rootfs plugin sets this property to the temporary path,
which causes temporary paths appearing in the report.
Changed the code to prevent storing temporary rootfs path
in part.rootfs_dir. This should fix the report.
(From OE-Core rev: 28d2d7d6f79df08431187c7debaab2a3fa516671)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using relative paths can cause copyhardlinktree API to fail as
it changes current directory when working. Converted all paths
to absolute paths using os.path.realpath.
(From OE-Core rev: a1c83cebe986e211dfc31be5cbd748f53fc298df)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic updates /etc/fstab on root partition if there are
valid mount points in .wks
When wic runs from bitbake this can cause incorrect results
or even breakage of other tasks working with the same rootfs
directory in parallel with do_image_wic.
Implemented copying rootfs directory to a temporary location
using copyhardlinktree before updating fstab to avoid conflicts with
other tasks working with the same rootfs directory.
(From OE-Core rev: 92e1c7d47e695eb4ce1a863cd0f6c49dca1c2339)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Total number of partitions should be taken into account when calculating
real partition number for msdos partition table. The number can be
different for the 4th partition: it can be 4 if there are 4 partitions in
the table and 5 if there are more than 4 partitions in the table. In the
latter case number 4 is occupied by extended partition.
[YOCTO #11790]
(From OE-Core rev: 5689139b3cd862e2df49f6b21171f513e8a46c60)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
isoimage-isohybrid plugin tries to build grub-efi in its working
directory if it can't find efi binary. Wic should avoid doing anything
in working directories of other recipes. It should use artifacts from
the image deployment directory instead.
(From OE-Core rev: 9a1709278de877085a8d92f6361624e279a603bf)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
isoimage-isohybrid plugin uses result of glob call to
get path to initrd image. When glob returns empty list
the plugin crashes with IndexError.
Checking if result of glob call is not empty should fix
the breakage.
(From OE-Core rev: ad02f253f08a3da3fa5c86ae4f6ba7f94b070578)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed isodir subrdirectory instead of removing temporary
working directory as working directory can contain copy of
rootfs partition and shouldn't be removed by any plugin.
(From OE-Core rev: fc12ce9d1b92cc0104cf456af1e3d5f146b9219d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
At the moment, when building images with IMAGE_FSTYPES=wic one ends up
depending on wic-tools and thus syslinux and grub-efi even when not
using those at all. Ideally, building an image with wic should only
build the tools and components really needed.
The problem is that "wic-tools" is needed also for the manual
invocations of wic, in which case everything that might be needed has to
be built in advance.
Replaced dependency on wic-tools with dependency to a much shorter set
of tools that wic uses almost for any image: 'parted', 'gptfdisk',
'dosfstools' and 'mtools'.
[YOCTO #11552]
(From OE-Core rev: 33ca15b94dbe7204c556c4b5526edd529f6d85f4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wic updates fstab if mount points are specified in .wks.
After partition images are created the original fstab is restored.
However, if exception is raised when partition image being prepared
wic doesn't restore original fstab. This can cause duplication of
added lines in fstab when 'wic create' runs next time.
Wrapping call of 'prepare' method and restoring original fstab
even if exception occurs should fix this.
[YOCTO #11633]
(From OE-Core rev: 29f7735030d383f9614bdb148b52a47c79f05eea)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved misc.py from wic/utils/ to wic/
Removed wic/utils directory
(From OE-Core rev: df906f3caa0721756f5ed48fa657e62e05ae2aa3)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Renamed parameter offset->skip to match names of dd
parameters.
Changed affected sparse_copy calls.
Added explanation of the parameters to docstring.
(From OE-Core rev: 08e2f4e59816c5757686255b267b08cbc46fbd95)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Plugin code uses boot.img file name for an image file. If there are
two partitions that use bootimg-pcbios wic breaks with an error
"file already exists: boot.img"
Made image file name unique by adding wks like number to it to fix
the issue.
(From OE-Core rev: eec6e946cce36cba304851fa4a1c1d7bfd7b0bed)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was overlooked when msger was removed in 28014087b8.
(From OE-Core rev: b561292c4e7b5578172066f82b6518b5bda53f42)
Signed-off-by: Kristian Amlie <kristian.amlie@mender.io>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
isoimage-isohybrid plugin fails with this error when
trying to find initrd image:
initrd = glob.glob('%s/%s*%s.%s' % (initrd_dir, image_name, target_arch, image_type))[0]
IndexError: list index out of range
as it uses TRANSLATED_TARGET_ARCH value as part of the image.
This approach stopped to work due to changes in oe core code.
initrd file name is made using MACHINE variable. wic can't get value
of this variable as it's not included into bitbake -e output.
Used basename of deploy dir as MACHINE value to fix the breakage.
(From OE-Core rev: cfbb3cc1279ea88ca3e2867f8a409c5120aa1f05)
(From OE-Core rev: e26fa1c34c33ffdc678f8073dade0126aff08b40)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Explicitly set system id 0x6(FAT16) for msdos partitions.
Removed old code that attempts to achieve the same result
using 'parted ... lba off'.
(From OE-Core rev: 230452faf151e277bfb2b49526923f8097755b35)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Restricted possible values of --fstype to the list of
supported types. This should catch incorrect values
when .wks file is being parsed.
Removed checks for empty fstype and mentioning of
unsupported fstype 'ontrackdm6aux3'.
(From OE-Core rev: 21af89a6d44ccea6aef975ffd2483a8fad1231de)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced runner.show call to exec_cmd call in bootimg-pcbios
plugin. Removed runner.show API as it's not used anywhere else.
[YOCTO #10618]
(From OE-Core rev: 9749336c37249af99c92478c3e4dc8821cb9a816)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If bootloader artifacts are not found in default bootimg_dir
use wic-tools sysroot for the same purpose. This should
prevent wic from failing if bootloader artifacts can't be
found in image native sysroot.
(From OE-Core rev: 9674bbd0585fc25ccd362f233b83d07ff8f6ff53)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed fsimage plugin and prepare_rootfs_from_fs_image API as
they duplicate functionality of rawcopy plugin. Fsimage plugin makes
wic to remove the image artifact from deployment directory, which
can cause problems too.
[YOCTO #10618]
(From OE-Core rev: 9a470752f5698f791f8f78e28d163a0b9c695186)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partition UUID for msdos partitioning is based on a 4 bytes long
system identifier. Wic uses random number to generate system
identifier. For the numbers starting with 0 partition uuid is
shorter, which makes wic images non-bootable as kernel expects
8 charactest in PARTUUID parameter.
Padded system identifier with '0' when generating partition UUID
to make it always 8 characters long. This should fix the boot
issue.
(From OE-Core rev: bdaba95af2b2c9174311374436f184d2a927f6f1)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed test failure caused by using bootimg_dir path
instead of kernel_dir to find systemd-efi bootloader:
FAIL: test_systemd_bootdisk (oeqa.selftest.wic.Wic)
...
FileNotFoundError: [Errno 2] No such file or directory:
'tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/recipe-sysroot/usr/share'
(From OE-Core rev: 552bd782d9ffe275b8fc7d7cb0b9aaceb51888c3)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used wic-tools STAGING_DATADIR if syslinux can't be found
in default bootimg_dir.
(From OE-Core rev: 79a935cfc86ffce6f4b4f328b90337de36ba6dbb)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed do_install_disk and do_configure_partition methods from
bootimage-partition, fsimage and rawcopy plugins as they're empy
and not used.
[YOCTO #10618]
(From OE-Core rev: d58c8ef2836418056f776a9586e0bb0d33afb788)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bootimg_dir is usually set to the value of STAGING_DATADIR and
kernel_dir - to the value of DEPLOY_DIR_IMAGE, so usage of
kernel_dir is more logical in bootimg-efi, bootimg-partition and
rawcopy plugins.
Replaced usage of bootimg_dir to kernel_dir in 3 above mentioned
plugins that use DEPLOY_DIR_IMAGE as a default artifact location.
(From OE-Core rev: 48a5d67d7cafdeac821e6f35bea380521ef017d5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changing bootimg_dir in plugins is a dangerous hack as this
value comes from wic command line and can be used by multiple
plugins.
(From OE-Core rev: 2457ea5338f7309316b474562b4723e8cb09286d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't need the gap that the extended partition occupies if we
already know that we have less than five partitions. Saves up to one
full alignment of space.
(From OE-Core rev: 485315dc170e29962a8848db38db73abafd0586e)
Signed-off-by: Kristian Amlie <kristian.amlie@mender.io>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we are both having a bootloader and a U-Boot environment file, we
can end up with two entries using "--source rawcopy" and "--no-table",
and since they reuse the same file [1], their cleanup handlers will
try to delete the same file twice. So make sure we only do it once.
[1] Although they reuse the same file, the resulting output is
correct, so it appears the file is accessed in properly sequential
order.
(From OE-Core rev: f1a3eac376c4600cdb128d870ad9b7e9d51ed9c0)
Signed-off-by: Kristian Amlie <kristian.amlie@mender.io>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without the int() function this variable will be a string. This will led
to a error in Filemap on line 545 due wrong types.
> [...]
> File
> ".../poky/scripts/lib/wic/filemap.py", line 545, in sparse_copy
> if start < skip < end:
> TypeError: unorderable types: int() < str()
(From OE-Core rev: 46b5814bcdc0e7e3cb293e877e2aa949baf5fef8)
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Installed vesamenu.c32 and its dependencies to support
vesamenu ui in syslinux config.
(From OE-Core rev: 6d7e57ca7e77f3164e4d24470bb1e3ee91a07a89)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
