I applied a little more information to this section to help
round out the variable explanations. Part of the change involved
adding PARALLEL_MAKEINST to the list of scaled variables.
I had left that variable off. Also added a new trade-off.
(From yocto-docs rev: 3d85d5385c03841c17dd33afb94c110edc12170f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated both the PARALLEL_MAKE and PARALLEL_MAKEINST variables
by expanding the note to indicate how to prohibit parallel make
threads. Also, added a cross-referencing link to the
"Debugging Parallel Make Races" section.
I added a short note to the start of the "Debugging Parallel Make
Races" section noting that if they can't properly fix the condition,
they can always do a work-around to set the PARALLEL_MAKE or
PARALLEL_MAKEINST variables to null.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: f8dccf3f115647cb039d91415819186cf38fa8bb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added some more detail to these two variables. The system sets
them according to the perceived number of cores. These default
setting are cool for single socket systems. However, if you
have some big system with a lot of physical CPUs, you might want
to cap off the values at 20. This is according to Darren Hart.
I also put in some cross-references to the "Speeding Up the Build"
section.
(From yocto-docs rev: 20eafc8290f46d8deea84dd6ff721b65cb8a1463)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7665]
Added descriptions in the glossary for the following variables:
* SDK_HOST_MANIFEST
* SDK_TARGET_MANIFEST
* SDK_VERSION
* TOOLCHAIN_OUTPUTNAME
(From yocto-docs rev: d8a7e3443d33d02d88e9d603dcff917a5508ae17)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the "Optionally Building a Toolchain Installer" section
to emphasize using 'bitbake <image> -c populate_sdk' as the method
for building outa toolchain. Before the change, equal emphasis was
put on for this preferred method and the 'bitbake meta-toolchain'
method.
(From yocto-docs rev: 447ad6167570bf1bd227771153de421d1154443d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7524]
The "Writing New Tests" section needed more clarification in the first
paragraph. One requirement is that minimally, an empty __iniit_.py
file must exist in the runtime directory.
(From yocto-docs rev: 519d0ff95e2ffbdb615d6dc27a6c11b393eb4b53)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also, added a cross-reference link from the archiver.bbclass section
to the new description.
(From yocto-docs rev: f825ba932970e9d62d335f249365a34b2992b6cd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to use usermod here not useradd.
(From yocto-docs rev: 7f4a5523c14304985ab8b277fd5010fd22903dea)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding Luna and dropping Juno. Pretty much went through the
"Working With Eclipse" section and dropped Juno and added
Luna. A major deletion was the BitBake Commander section using
Hob. Todor told me to drop this section completely. Note that
I also added a couple new YoctoProjectTools that appear on the
menu: SystemTap and yocto-bsp.
(From yocto-docs rev: b63ec6c706f41dc4666c2fd79d797962c35f8baa)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the requirement that debug-tweaks is needed in order to
individually use the allow-empty-passowrk, empty-root-password,
and post-install-logging features. These three features can be
individually turned on an off regardless of debug-tweaks.
(From yocto-docs rev: ea33b98c0a7ceb80adb15bf63eee8d6872099235)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In response to community input where developers were attempting to
locate information on how to write packages out to a directory
other than ${DEPLOY_DIR}/<package_type>, I updated the "Package
Feeds" section, added several new DEPLOY_DIR_* variables, updated
four classes, and updated four tasks. Here are some details:
* Made changes to the "Package Feeds" section to provide more
accurate information in the package feeds directory structure
used by the build system in build/tmp. These changes included
updating the figure itself and some explanatory text.
* Updated the DEPLOY_DIR variable description.
* Added new variable descriptions for DEPLOY_DIR_DEB, DEPLOY_DIR_IPK,
DEPLOY_DIR_RPM, and DEPLOY_DIR_TAR.
* Updated the related classes: package_deb, package_ipk, package_rpm,
and package_tar.
* Updated the related tasks: do_package_write_deb, do_package_write_ipk,
do_package_write_rpm, and do_package_write_tar.
Reported-by: Trieu Nguyen <trieu.t.nguyen@intel.com>
(From yocto-docs rev: e8742267506bf9359346cfcd3965f762ed2c7d6f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7630]
I applied some feedback from Laszlo Papp suggesting that the user
can also use '-fpic' as well as '-fPIC' for a command-line option.
(From yocto-docs rev: ec79c9a39955b22cb2b8cec44ffcaab22aba479b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7386]
Apparently the "‐" ENTITY used throughout the YP manual set to
get literal "-" characters in example commands renders into a unicode
that is not a dash. This results in users getting errors if they
attempt to cut-and-paste a sample command that uses a "-" character
from the manual into a shell. I have universally replaced all the
"‐" strings in the YP manual set to "-" strings.
(From yocto-docs rev: ef6dbf591eee70866f163e3c98454b6145f4fa3a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
GNOME Mobile no longer applies. I updated text to use the
GTK+ wordings.
(From yocto-docs rev: 09e67479f470ca4b21f532c5fc96f36d3bf1a39d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I typically try to use the underscore character to string together
multi-word user-input descriptors in examples. I fixed a bunche
here.
(From yocto-docs rev: 68474b5a8b5c96b0fc19fda29e667369f4606e31)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the introduction, the ref-manual references several other YP
manuals. If the manual is build separately, these references resolve
to the appropriate manuals. When the mega-manual is built, the
same references are designed to not become links. In otherwords,
mega-manual.sed processes those links out. This is by design.
I found a #profile-manual tag on one of the links in the introduction.
This resulted in a link in the mega-manual that would go nowhere. I
removed the tag.
(From yocto-docs rev: fdaf114ece20994ec55061612ab53e9334afde26)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A link was going to an old YP page that talked about patch
style guide stuff. That page simply redirects the user to a
styleguide of the OE. I fixed the link in the manual to go
directly to that page now.
(From yocto-docs rev: 913c30eae42e89cc6f8dd99026594c2843985c58)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I found a link that is processed by the mega-manual.sed file correctly
but for the situation it does not resolve right. The link is a
"naked" link. In other words, it doesn't have a #<tag> part.
When the .sed file sees these types of links, no hyperlink is
generated. I found a case in the dev-manual where I reference the
Toaster Manual in general and would like a link that would take the
user there. So, I had to add a #<tag> part to the link in the XML
(From yocto-docs rev: ab11e9822b5ec1b0f7138f1419ce9c340f6f27ad)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I don't like these. I fixed it up.
(From yocto-docs rev: 2267fc3353563a249cc9bf16ec0bf4d5930ddaa9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I put this in the intro list for the section that presents various
ways to use YP.
(From yocto-docs rev: 05f924f799a1f1396bf7154b298aabc3d06ad1d7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This practice is not good. I had one in the manual. I reworded
the text to not use that term in a link.
(From yocto-docs rev: 53636ae7370827945b31d11785410dd44670bb91)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Repositories, Tags, and Branches" section had some wording
that described how branches are maintained in the poky repo that
made it hard to maintain in the doc from release to release. I had
a list of past releases by name and as such would have to update
it every release to make it reflect the last set. Well... this
is not the best way to do this and proved out as it slipped through
the cracks for the YP 1.8 release. Consequently, I recast the text
so it is "release proof".
(From yocto-docs rev: b6e27d06df58a43bb767e9616ccf3c0711e83cf6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In an attempt to keep the project as much open source as possible,
I removed the link to Intel from this list of resources. We don't
list Linux, OpenedHand, Wind River, etc.
(From yocto-docs rev: 5efe375a94a14d4a70aa2c3ff9ab39d6c7362526)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added some stuff about "poky" meaning the default distribution
when using YP and the poky git repository to build an image.
(From yocto-docs rev: bd534a5bdf405044c8f1a60ee9e251bff2a0e53c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The send-error-report tool syntax has slightly changed since the
documentation was written. Removed the [server] part of the
command and added more detail on its use and results.
Reported-by: Michael Wood <michael.g.wood@intel.com>
(From yocto-docs rev: 10e28ab877b327301be536e5d515d5a419d082ac)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wic is not using parted and other runtime dependencies from host
system anymore. It uses native tools instead. Removed host parted
from the list of requirements. Added instructions to build native
tools.
(From yocto-docs rev: ab22aff62bd9ffde3dfefe9fcabadc6e5aae7e31)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
An old note still existed in this entry that stated we don't support
glibc. This is not true. I deleted the note.
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: e72f248f45678fb445e60106dd338c4d9cd114d8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7630]
Apparently the text relocation being done here can cause runtime
performance issues. I documented a potential work-around for the
issue and provided a cross-reference link to an external site for
more general information about text relocation at runtime.
Reported-by: Laszlo Papp <lpapp@kde.org>
(From yocto-docs rev: f7ba2fd03ee40c5dbe6a07a24a63d9147857ed78)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Style sheet was not spacing after the first paragraph for glossary
entries.
(From yocto-docs rev: fb08aec5303ed21315839c55b413873569497f23)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This involves the following:
* Inserting a new row for all manual revision history tables
to have "October 2015" and 1.9 as the release information.
* Updating the mega-manual.sed file to process links for 1.9
* Updating variables in poky.ent to deal with the 1.9 release
variables.
(From yocto-docs rev: 1ed55c08b96cf0fded38833635111a5c6da86781)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7133]
Added more examples of how variables work in Makefile projects.
(From yocto-docs rev: e8aa42f3609de3dfe94c022d957b855a4f7ef032)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7559]
Added some explanation on the syntax. As it was, the positionally
dependent nature of the script's parameters was not accounted
for. This is now explained. Also, talked a bit about the
bitbake-cookerdaemon.log file.
(From yocto-docs rev: fcf52a15acea2d75df9c84550d7e73c988ffb4bb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A cut-and-paste error had left a "package_deb" string in the
first sentence of the section. Replaced with "package_rpm."
Reported-by: Geoffroy VanCutsem <geoffroy.vancutsem@intel.com>
(From yocto-docs rev: 38b20d775ba41cb14d86177dddd85ada32fb3f86)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7559]
Removed the information stating that the port address 12345 is used.
Really what happens is a random port address is used.
(From yocto-docs rev: f469c2431b26593a762e348e9c5d0e84c582eab8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated this according to some changes Richard and Paul wanted to
see make it into the 1.8 release.
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: f571e35169818355fea2a20715df3e8f7405134f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous commit did not fix the problem. This one does.
(From yocto-docs rev: d19c2096018db0127d11814ddcba919ad469e428)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some steps updated according to Belen and a video link fixed to
not point to Belen's Youtube area.
(From yocto-docs rev: 557c22fdd287160f6aabac0928ce6bd8d6af3394)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was incorrectly stated as 'bitbake -c install' in two
places. I substituted the correct string.
(From yocto-docs rev: fe54de82cff054d4319c635a0ddba2de7cc6ebd6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This should be it unless there are late coming comments.
(From yocto-docs rev: cb32e3330a6fe2d26425f8765689749afcd989e9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added xlstproc to Fedora and CentOS package lists for building out
the docs.
I abbreviated the list of references in the end chapter by leaving
just the main URLs for bigger areas such as Intel, OE, etc. Then
I put in a link that goes back to the dev-manual list of other
informations as that is much more comprehensive.
(From yocto-docs rev: 81667b85cd8c639dd32cd5a8f614b4c890eb4dde)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed an out-dated note near the bottom regarding a distro
we don't support
(From yocto-docs rev: 4211914f16d4ab01182633785068b56a258c0d04)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We did not have time to do this for 1.8. So, I restored the look
of the glossary pre-images. I did leave commented code in both
the glossary chapter and the style sheet for later.
(From yocto-docs rev: 9f1472b7d4cd86545e7927b0f693aafc88ae2791)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7535]
Removed this from two places.
(From yocto-docs rev: d169ce99610745e8c1b4b53d898f526e557af665)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved the note that tells the user they have to initialize the
virtual environment every time before starting Toaster to the
correct location. I had it misplaced.
(From yocto-docs rev: 65258338e1ffb92ded573ea3b447b424b5f5fa97)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some suggestions from Paul Eggleton to downplay the role
of this variable. It is basically ignored now in all parts of the
manual set except for the descriptions of the variable itself
and the BBLAYERS variable. I added some text reinforcing the fact
that BBLAYERS_NON_REMOVABLE is ignored by the build system and only
matters if you are using Hob.
(From yocto-docs rev: 98112751aaec6e25de48d9e3ee56592be3f53a07)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review edits from Paul Eggleton.
(From yocto-docs rev: 4815556b6c9f45ce230afede7cb3b2aadf0bef1c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review comments from Paul Eggleton.
(From yocto-docs rev: 403c9ae5443eaf2a115e2224f07ee19f98c8139d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I could not get the embedded vids working very well. So we
defaulted to just linking to the Youtube locations directly.
(From yocto-docs rev: 95bef674ec04eec94f568ab00b94f7174d456011)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The user must re-initialize the virtual environment (if installed)
prior to starting Toaster each time.
(From yocto-docs rev: b0daa23784f17778f758b0572f90f9293a822812)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The docs are not building on CentOS and we think it is due to the
XSL templates being called for the Eclipse parts. I located all
the "current" templates and switched them out for "1.76.1" version
as are used by the mainstream doc builds.
(From yocto-docs rev: afbddde6524630433dfec973bbe886de32395bc8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Trevor wrote a nice paper (tutorial) on the use of devtool that I found
to be very helpful in developing the information for this new workflow.
I decided to publicly credit this effort with a small footnote near
the top of the section.
(From yocto-docs rev: 97d234f2d535f85e5a50ac4e7f0c0a79579cd004)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton reviewed the section.
(From yocto-docs rev: 82d9750b4349b3c54f73118ec7d65f0bb96e3f7a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The figures I added are for the Toaster manual.
(From yocto-docs rev: fb9bb83e48afd2e7d24d68f0c167d8d64f5d25fd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the reference chapter in so it is included as part of the
mega-manual.
(From yocto-docs rev: 90a6ebabd0657d6dd7381a8c1fc7db5ea8b26a1f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the three Toaster Manual figures to the list of
mega-manual figures so they will be included in the tarball
generated for mega-manual.
(From yocto-docs rev: 2190bc43dfc20c0c0ef5da82c85570f9294e1788)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits to the "Customizing an Image Hostname" section from Ross.
Updated the last paragraph to not imply incorrect information.
Fixes [YOCTO #7417]
(From yocto-docs rev: 8997be297077ee0052a5afbe50b9864cdef14058)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7417]
New section to address how the user can change the devalt image
hostname written out to /etc/hostname.
(From yocto-docs rev: 4ac6bc05947e56106aafcc6f9aef93bd93293fba)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Schedule did not permit support for Luna to complete. So, I
backed out the half-complete changes to support this version of
Eclipse.
(From yocto-docs rev: 1ca893766047f30ffbb0c99e51e575ea1302e7bc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7460]
There was a single occurrence of specifically calling out that PR
needed to be manually incremented in the workflow section of the
manual. It was step 8 of the Quilt flow. I deleted this step.
Previous edits to the set have included extensive instruction on using
a PR Service, which is basically what replaces the need for manually
updating PR as it was in the past.
(From yocto-docs rev: d8db2175225be45cb3f2b4d11f8281c5b1f40ad4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced texinfo -> makeinfo in the list of essential packages for
OpenSUSE.
texinfo was in the essentials to only provide makeinfo utility.
/usr/bin/makeinfo is provided by makeinfo package on OpenSUSE distro, so
it's enough to install makeinfo to be able to build poky.
This change reduces number of packages installed on the host system as
installing texinfo causes installation of around 1500 texlive-*
packages and requires around 1Gb of additional disk space on OpenSUSE.
(From yocto-docs rev: dce793a2ac0a781ae074f3eb7ad34fbdb65dc3ea)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed out the example to use some bits from the meta-xilinx layer
instead of the emenlow layer.
Reported-by: Robert P. J. Day <crashcourse.ca>
(From yocto-docs rev: 477c62877f5882538176d0f9c8a10fc4cf878628)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example was ancient so I consulted Bruce Ashfield for a better
example and implemented it.
(From yocto-docs rev: e737f380ca5bb36c0095f11182cd3e3a93791e61)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The note alerts users to issues building QEMU when the build system
has the oss4-dev package installed.
Fixes [YOCTO #7382]
(From yocto-docs rev: 0f189ca7567e3e646808d5360fdb1499df8605c0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7386]
Apparently, copying HTML displayed commands that have a
double dash created through "‐‐" in the docbook source
causes some issues in the shell. I have scrubbed the manual set
to replace any "‐‐" strings with "--".
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: e88b813b71d7d6d8acd8a8638f2db71265145b64)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tweak the manual to refer to the name of the kernel build directory as
it is listed precisely in linux-yocto.inc.
(From yocto-docs rev: f8c762e42a67bd84b733a5ae2512581af805a76b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tweak a number of doc lines so that the KERNEL_FEATURES variable
refers directory to .scc files, and does not take advantage of
potentially confusing shortcuts.
(From yocto-docs rev: 6236fb098fc2d518f6f4f63e16b19a06a775d2d6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
First edits to update this section to support the Luna version of
Eclipse. I weeded out Juno, which leaves Luna as the preferred
version and Kepler as a second version if they don't want to update
to Luna.
(From yocto-docs rev: 4f2dc237aa3498402cdf637ac2e85fdf0c3bf8a0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the support of Luna version of Eclipse, I had to create a new
variable named ECLIPSE_LUNA_URL and set it to
"&ECLIPSE_DL_URL;/releases/luna"
(From yocto-docs rev: 4c686fc8e52d608975c4fd9040fd83870419bcf0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fill out missing machines for the MACHINE variable.
(From yocto-docs rev: 2b8179cfb7e3a25d95c43f9160d284ebd5deefc7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the "Using Kernel Metadata in a Recipe" section, the example
called out "fri2" as an example BSP that shares the same KMACHINE.
This was true last release of meta-intel but is no longer true.
I used "emenlow" now as it seems to be like "fri2" was before
the "fido" release.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 65516ed8f31752288eeaaacc6279f808a3a8a8df)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Substituted a more correct build directory path in the
example by providing
"${WORKDIR}/linux-${PACKAGE_ARCH}-${LINUX_KERNEL_TYPE}-build"
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 818493d7ee5fc6c1750f20e5cea22a3816c8675c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added some changes based on input from a new user. Basically,
added a bit more explanation in a few spots and some suggestions
on where to read or go next after concluding the two basic
quick-use sections.
(From yocto-docs rev: 5381f1202957e171d16d97332b40e8d363828a20)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modified the area from which the Eclipse Git repository is located.
This has changed.
(From yocto-docs rev: ec2bf4125877b28dae0681c8b578c7bebec5a5b6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This kernel is not supported and is ancient. Many of the examples
were referencing this kernel. I switched to use the 3.19 version.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: ba04c4f11a02b4562994d5d79838cd2cf90efc7e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed a small text issue where a hypen was needed. Also, provided
a real link to the YP LTSI page.
(From yocto-docs rev: aa8c06b79eef1855c3b5af4c8bfa47a96a86d332)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some edits to the areas where KBRANCH is discussed.
Clarified that setting it is not optional any longer.
(From yocto-docs rev: 4d0b2d92140d066048d9ff36453c7ea589eebe55)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This variable is out. There were some references to deal with.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: fcdd5de04c722ebde2d3f236310c46a251cf1afc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed traces of the deprecated KBRANCH_DEFAULT variable.
(From yocto-docs rev: 8130f0db46be872cd857d8579323e4ad00da6380)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some small changes to clarify how to change the configuration.
(From yocto-docs rev: fce7c97abb69f15142dbadf90a90965a49ec3e0e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7358]
Added a new variable description.
(From yocto-docs rev: 42ff075319b346f22d2c604c0de249ac3039a992)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 198ce97a1158237056f035ade555ce04a6031c56)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 4d85a363602eeb8c5f52064af9ffa1a47e541470)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two areas affected by this change. I updated the KBRANCH and
PREFERRED_VERSION variables in the glossary. One change in the
KBRANCH area was getting rid of the deprecated Crown Bay example.
I substituted in the Emenlow BSP.
(From yocto-docs rev: d7ed727ab5828dc257361c558a86a298bc537748)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These kernels are unsupported for the 1.8 release. They will still
show up in the YP source repos but the recipes are removed from the
poky area. Updated all references appropriately.
(From yocto-docs rev: a9adc071409fd31dabc3affec12350c300312600)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Version 1.8 drops support of the 3.10 and 3.17 kernels. The
emenlow example was using the 3.10 kernel recipe as a showcase
and it also listed the recipe in the directory structure. I
removed it. Additionally, the yocto-bsp create command was
prompting for the user to accept the default 3.17 kernel. I changed
that to 3.19.
(From yocto-docs rev: 03bf66e961400b27b7e31d4a25776a11ce5719fd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved the PNG file for the context to be the first item displayed
for a given glossary term. The PNG file must be negatively indented
though to look decent.
Fixes [YOCTO #5601]
These reformatting changes were needed because of brower incompatibilities
discovered with the existing solution for displaying these PNG files
with glossary terms.
(From yocto-docs rev: 06aeb6540c1343825369dd02006cb19e5a318d48)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved the PNG file for the context to be the first item displayed
for a given glossary term. The PNG file must be negatively indented
though to look decent.
Fixes [YOCTO #5601]
These reformatting changes were needed because of brower incompatibilities
discovered with the existing solution for displaying these PNG files
with glossary terms.
(From yocto-docs rev: c84c4bc91b10e1443dc5aefc3a987a370d25432b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7306]
Some review updates to have better wording.
(From yocto-docs rev: 6f2d10c87128934958295111d10e038689fd94d3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7306]
Added an example for when the user tries to inherit the most recent
version of software through use of the SRCREV variable. When using
SRCREV = "${AUTOREV}" PV does not always get ${SRCPV}, which it need
in order to fetch the latest software. I added a clarifying example
to explain this situation.
This commit also has a small change to fix a broken link to
EXTERNAL_TOOLCHAIN. We do not documentat that variable so I removed
the link.
(From yocto-docs rev: 82f66a7193d0e40ffd65547223d4d9b10fdcf9bd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6901]
This is the 2nd review draft of the manual.
(From yocto-docs rev: 9f541e4421e0e74e59e3b3da1896b6c1254daf08)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4907]
I created a new section in the toolchain chapter of the adt-manual
called "optionally Using an External Toolchain". This provides
some fundamental information for the user that wants to use
an external toolchain. Additionally, it references Mentor
Graphics Sourcery toolchain as an example.
In the ref-manual, I updated the TCMODE variable description to
better integrate the MGC Sourcery toolchain as the overriding
example.
(From yocto-docs rev: 51e9c3b88f7e5a16da2aa101589b0f2612fff11d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The image feature 'debug-tweaks' has been fragmented into three
separate areas of functionality that deals with handling empty
passwords and post-installation logging. I updated the list of
image features appropriately and the description of 'debug-tweaks'
in the EXTRA_IMAGE_FEATURES variable.
Fixes [YOCTO #5344]
(From yocto-docs rev: ce0ab20472a75049298287cd05109f6e091b80bd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updates to the following:
BUILD_ARCH
SOURCE_MIRROR_FETCH
TARGET_PREFIX
SDK_PREFIX
SDK_SYS (I added this one new).
(From yocto-docs rev: ad5f9b56dc912783b415b30604456bd5071f9721)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5601]
Discovered that the solution I had to display a small PNG file
to indicate the context a variable is used in the build system
was not displaying properly in the ref-manual variable glossary
when using the Chrome browser. The solution was to adjust some
settings in the CSS file and place the image after the term.
This allowed me to dump the webkit stuff that I had inserted
into the CSS file styles to make it work in Mozilla, which
ended up not working in Chrome.
Additionally, I needed to update the 'define-generic.png' file to
have less white space on top as part of the figure. Note that
this commit adds the figure to Git for tracking as well.
(From yocto-docs rev: 59a1295aeb1c866f330634907ad28642a997cd63)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied a different example from Paul.
(From yocto-docs rev: b21ef6a792361eb0893ee17524794fba3bed885c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Small typo fix for STAGING_DIR_HOST. Some re-wordings for
TARGET_PREFIX.
(From yocto-docs rev: 919a13436de6ea150f685a50b6ecc8154b75da86)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Did a significant re-write on this description as I had the
meaning pretty far off.
(From yocto-docs rev: 6bcc63ac83f0aeb3d3d06db33c7a8f010c737312)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Re-worded the way you say the date.
(From yocto-docs rev: 3c6b51fb474628954654f2f1290509a78a48a1fb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the meaning up.
(From yocto-docs rev: 1b057475acd2bf33bb6fa3bd03e85a415697873f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added an example.
(From yocto-docs rev: 7a22c2941618f29ad89087c186ae2af6f0c07323)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed wording to be more accurate.
(From yocto-docs rev: 1acb7ce94a4f4b02cc50d1e098f04a77d9a53ab3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some review edits to these two variable descriptions.
(From yocto-docs rev: fb1eb903b9bcc8b0bb67e72c795a1dd602143589)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the last paragraph example as it is not a good example.
Unfortunately, there is not a good example so I replaced it with
a minor suggestive work-around at the end of the first paragraph.
Also, used some <replaceable></replaceable> formatting for the
first paragraph.
(From yocto-docs rev: 6c3989fd4fe41a6434d70208d59747060e62a366)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6852]
I added a new FAQ entry to address situations where during a
native build, the build fails due to previously installed stuff
on the system from /usr/local/include and /opt. The entry
tries to cover "leakage" issues in general but calls out the
specific case involving libiconv and iconv.h.
(From yocto-docs rev: 2c09c7ee0970189953bfbbdcaac49a1ebe8482fe)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The way the mega-manual used 'xinclude' to suck in the other
YP manuals was to suck in the root XML file. The problem with
this was that the root XML file for each subsequent book would
include front-matter information. The front-matter information
included an .authorgroup style, which caused the new mega-manual
title displayed at the very top to be also re-displayed with
a subsequent manual's title. These changes altered the strategy
for using 'xinclude' to pull in the various YP manuals. Rather
than pull in the root XML file for a given manual, individual
chapters are pulled in that comprise a given manual. A slight
side-effect is that chapter numbering is sequential from top to
bottom in the mega-manual, which I suppose is better as it is
being presented as an entire manual anyway.
(From yocto-docs rev: 61cc9f2f92900894ef09ff13e1e92ebe30a17be3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the customization layer for some reason was referencing the
ref-style.css file instead of the mega-style.css. I changed this
over.
(From yocto-docs rev: f47e14c27cde0a436a9ffbf26ca425951eae5d4e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6901]
I removed some left over stuff from the intro that should not
have been in there.
(From yocto-docs rev: 91d1ee2b4433312e0f94e1ac99f8ec0e14ef6ac7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added logic to string search and fix links in the Toaster Manual
part of the mega-manual. This keeps the links correct for the
mega-manual.
(From yocto-docs rev: f93b5a187984949129db16b638935b678fd344a1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6901]
Added the toaster-title.png file to the mega-manual/figures
folder so the Toaster title would show up in the mega-manual.
Added lines so that the mega-manual would include the Toaster
manual file to the mega-manual.
(From yocto-docs rev: 5a4a67e4f140802da133b7bcb480c84b4a8edb63)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6901]
These are the second and third chapters of the Toaster Manual.
(From yocto-docs rev: 6ff4e3dfff391efdbb0f36dc6800bf115abcfc92)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6901]
Makes it so the boxes appear around the manual revision table.
(From yocto-docs rev: f3ee2bc1ef957a585d0f814b91451a8460dec8c1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added both chapters that follow the intro chapter to the root
file so they will build as part of the book.
Fixes [YOCTO #6901]
(From yocto-docs rev: 37967896f12471d34188cd532e00211ca665910b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes to the files that support building out and publishing
the Toaster User Manual:
* poky.ent - Added a new variable YOCTO_DOCS_TOAST_URL that can
be used in other manuals to link to sections with the Toaster
User Manual.
* Makefile - Added a section of code to build out the Toaster
User Manual. Currently, no eclipse support is added as I don't
think we want to cross into that development environment with
Toaster.
(From yocto-docs rev: 35ea6656265d61024d5db36a534a7250f783956a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For this commit, the manual only has a single "intro" file with
placeholder text only. Graphic for title page is in place,
stylesheet is in place, all files needed for a successful, initial
build of the new manual.
(From yocto-docs rev: 99416caa943fe6af13292b18bda53522ce3576d6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6912]
The example used to make sure builders use the same sstate
signatures regardless if they use icecc or not was incorrect.
I updated the INHERIT_DISTRO line of the example to use the
append part in the name so it appends the icecc as suggested
by the bug submitter.
Reported-by: Peter Bergin <petan679@gmail.com>
(From yocto-docs rev: 1f6b2f152202ab6e0be3026af3275f67bdb40d16)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7256]
In the "Serial Console Connection" section there was a link to
TEST_POWERCONTROL_CMD when it should have been to the
TEST_SERIALCONTROL_CMD variable.
(From yocto-docs rev: 9ec64c86bd4171a017898daa332d2a98fea0358a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The description for "tc" was described as "the called text context..."
rather than "the called test context...". Updated the description.
Fixes [YOCTO #7269]
(From yocto-docs rev: 0da4437c26225ce0302f10f7ba3c012f1f990c74)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These edits help place the two sections within the new organization
that basically splits out the devtool and quilt methods as ways
of modifying your source code.
(From yocto-docs rev: 1dc2e8783d9774bb98a30e06d114f1c9bfb85b71)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using the 1.76.1 version in all the customization layers so
the manual revision tables will build with boxes.
(From yocto-docs rev: 85a31ef53a59d17bed23ebf57a14db507eb21338)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Put in proper front matter for the mega-manual. This effectively
creates a real title for the manual as well as a brief abstract
that explains why this behemoth exists.
(From yocto-docs rev: 26c78f0b00762846a839fbfc9ba969b7aa5d5b58)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Completed draft of the new devtool material. This commit affects
some linking and figures across the YP doc set.
* Added the build-workspace-directory.png file to both the
dev-manual and the mega-manual.
* Updated the Makefile to include the new figure in the TARFILE
for dev-manual and mega-manual.
* Re-did the section organization to pull the quilt and finding
source file out of the "Modifying Source Files" section.
(From yocto-docs rev: 4585b9fbb1636ae3c65e2e3ad2d1d6baca636e59)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle reviewed the section and I updated some things based
off his input. A rewrite to the "Makefile-Based Projects" section
to get it technically correct. Also, removed all SDKROOT
documentation from both the adt-manual and ref-manual.
Fixes [YOCTO #7133]
(From yocto-docs rev: dd785777834611d94868a3774f2eb21ffc081b1a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7133]
Edits to add more clarification for use and role of the
cross-toolchain environment variables established when a user
runs the cross-toolchain environment setup script.
(From yocto-docs rev: 2c3fa3a838a3a8970cd112935e903c96552ed06b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added the ADKROOT, GDB, CROSS_COMPILE, and CONFIGURE_FLAGS
variables to the glossary. Also added appropriate cross-reference
links from the adt-manual to those new variables.
(From yocto-docs rev: 812367e3b915b99d900b7934c4d5d409f393e814)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7133] partially
At the end of the section that first mentions running the
environment setup script for the cross-toolchain, I added a list
of environment variables that are defined as a result of running
the script.
(From yocto-docs rev: f1b66a09676d1b5c055e7ae7e7cc9a7f45cb9b67)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The note in the "Getting the ADT Installer Tarball" section has
a note that warns the user to be sure they have local.conf
properly configured before baking out the adt-installer. I
provided a linked cross-reference into the section of the
ref-manual that takes a closer look at user configuration.
(From yocto-docs rev: d13c044b65543a2f15fbda0266d2e30a14cfd19f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The intro to the "installing the ADT and Toolchains" section notes
that the user must source the cross-toolchain environment setup
script. I added a clause stating that this establishes environment
variables.
Fixes [YOCTO #7133] partially.
(From yocto-docs rev: e9777012d935ced8fd82209543569aaa70ab1832)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "User-Space Tools" section incorrectly stated that user-space
tools are provided as part of the distribution. The Yocto
Project is not a distribution. So I changed to say that they
are provided as part of the Yocto Project.
(From yocto-docs rev: 03dd97b68a1900959aa51ad6a17547822e8392fc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added text to note how this term is used, what makes up the
OE BS, and how the term "build system" is used in general.
(From yocto-docs rev: 2af0a59a84fd1cf6d23db29f470cb5644f962746)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The list of terms had a "build system" term that basically
described the OpenEmbedded build system. I dumped this entry
in favor of "OpenEmbedded build system." I updated the term's
description to cover the generic term "build system" for no
confusion.
(From yocto-docs rev: 0ada8348a2ace6ce99e640d1c1f21812188151d5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This start to the script is not really necessary and is in fact
the rare case. I have removed two occurrences of it in the
"Post-Installation Scripts" section where it was used in code
as the best form to create a script.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: f7c1a1e135e8a9d76005bb6ae7b9cc2810f0af90)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found a typo in this list. The "qemux86-64" should be "qemux86_64".
(From yocto-docs rev: 32f62f51c1574f3a479c12b67aeba7ebcb743a02)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the description for the SOURCE_MIRROR_FETCH variable
so that it actually made sense. The [doc] string was also
updated.
Found a typo elsewhere that was fixed when I spell-checked the
file.
(From yocto-docs rev: 609f09231815f80ea3fd800e0b5d9a4fbad110cc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section on "Handling a Package Name Alias" was confusing and
wrong. We decided to eliminate it. The section was removed from
the dev-manual. The corresponding variable DISTRO_PN_ALIAS
remains for now but without the cross-reference link to the
now missing section.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 9938cdcc8488baffa4252288bf45243055e76fed)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scrubbed out the occurrences of eglibc and replaced them with
glibc.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 868ceda79b1c738349e512e523c850b24f9232ca)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scrubbed the eglibc from the buildhistory directory and
also replaced with an i586 example.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: c7469f1a857f278e1adac9012d99802195e36849)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the references to eglibc and replaced them with glibc.
This involved updating the example buildhistory output with
current examples as well
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: b44cce9817191d616d51d6b1d067efc730423198)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7133]
This goes toward fixing the bug but not completing it. I have
added the following variables to the variable glossary:
SDKTARGETSYSROOT
PKG_CONFIG_PATH
CC
CXX
CPP
AS
LD
TARGET_PREFIX
AR
STRIP
OBJCOPY
OBJDUMP
RANLIB
NM
(From yocto-docs rev: c9d9e422684dad7cdc81db309235d0d1751ac88a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a Python script that a developer can run to create a .patch
file that when submitted to oe-core will update the documentation.conf
file. The update will bring the [doc] file variable descriptions
in line with what is in the ref-manual variables file.
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: f9dca76a8d9be3dcdbde9229beb03f0ba3701485)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This option to the PACKAGE_CLASSES variable is broken and not
supported. I added several warnings saying such. We opted to
keep the documentation rather than eliminating it completely to
prevent questions should someone find the code and wonder why
it is not documented.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 1acf3da2034c4c3f74acee1ccb375f0450ed90a0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The way the old manual set had worded the use of the
BB_NUMBER_THREADS, PARALLEL_MAKE, and BB_NUMBER_PARSE_THREADS
had become depricated. It suggested a lot of user intervention
to get these variables set to have the build system utilize
optimal parallelism. The change a while back to the build system
where the variables are set to the number of build host cores
now makes the variables automatically be set to their best
values. I have gone through the manual set and changed wordings
appropriately to reflect this.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 3a27b1792c92a2f22173315e2732f672cdad2c78)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Speeding Up the Build" section presents a list of items the
user can consider when they want to tweak the build speed. One of
the items is the three variables BB_NUMBER_THREADS, BB_NUMBER_PARSE_THREADS,
and PARALLEL_MAKE. It was noted that the system figures out
the optimal settings for these now and it is pretty useless to
override the settings. However, the introducing sentence to the
list is still valid due to other considerations that go beyond these
three variables. So, to update the text, I have re-emphasized the
role of these three variables for quickening the build time.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 84610550cef66d0aa7478bcf95ad97b081709b2f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example was out of date. Updated accordingly.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: b95535fca149abbbe4fee7e74ebc13d2bb376c27)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated some text to indicate that you should put patch files
in $BP, $BPN, or "files." Also, added more on how the patch
files suffix is (i.e. accounting for compressed suffix names
like diff.bz).
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: d9e23da24e9d86ec5e2b9d4067667478f3e56ba1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patch files can end with compressed suffixes such as
diff.gz and patch.bz2.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 69993710d1466dddc804c33c1d76f46d0982d28f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the "Fetching Code" section, some loose description of how the
build system reacts to the two checksums in a recipe existed.
Robert asked some questions about how the behavior would be if
just a single, correct checksum existed and if the two existed but
only one proved correct. Turns out, if you supply a single one then
the build will not throw an error or warning. If you supply two
but one is incorrect, then the build will throw an error or
warning. I updated the text to be technically correct without
going into huge details.
(From yocto-docs rev: f49a744821d9326314803d5003158bd402e74e0d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor edits to the original patch. These edits were caught by
Robert P. J. Day.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: b50a2e44eccd50166351611f17c643cbbc60f8b8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Placed a reference for more information on the variable into the
section of the dev-manual that explains how to choose a device
manager.
(From yocto-docs rev: 3f9b1329fe4794af03d673323d11558e85d9b097)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch was modified to fit in with the style of the book.
(From yocto-docs rev: 7c6c7ac573f92bfc844977e0d7a97ca4aac9bc70)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I had it out of order alphabetically.
(From yocto-docs rev: d766cc58dfe2581599815b76729c742034c910ef)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bob Cochran pointed out that the skeleton recipe shown in the
example is not really what is created by newbb.vim. I updated the
example to match.
(From yocto-docs rev: 2dfa712522aec5204b9e739b6060109090280011)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was a bit confusing on the use of "_prepend" as associated
with the FILESEXTRAPATHS statement. Especially in the final note
where it indicated you don't need "_prepend" if your append file
is not adding any new files. I updated the note to be more specific.
Another small change I made was to replace the Crown Bay BSP referenced
in the section with the Emenlow BSP, which has a longer life span than
CB.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 35bdc8031bc4ecf1ea321b0cafade97eeaa56513)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When you "make" the mega-manual, there were four tags across the
various manuals where the same string "id='intro'" occurred. This
causes warnings during the make process. I updated the strings to
be unique. There are no cross-references to these so no collateral
issues were caused.
(From yocto-docs rev: d0e770e0ad797031a75e2373a41723408b4b051c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the following variables based on slight review changes
from Paul Eggleton:
EXTRA_AUTORECONF - changed autoconf class to autotools
KERNEL_IMAGE_MAXSIZE - Wording tweak
AUTO_LIBNAME_PKGS - Wording tweak
DEBIANNAME - [doc] string updated
TCLIBCAPPEND - Second clarifying sentence in first para added
PACKAGEGROUP_DISABLE_COMPLEMENTARY - [doc] string updated
(From yocto-docs rev: ff5c765ffab1cdf6fc8a007cebdf7114432f65ef)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section "Customizing Images Using Custom IMAGE_FEATURES
and EXTRA_IMAGE_FEATURES" needed a bit more clarification on
the image features. The text pretty much passed off image
features as all mapping into package groups, which is not true.
Some, like "debug-tweaks for example, are more like general
configurations. I updated the section accordingly.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 7dd55ff0bd6f7923e22695ed7323df5cfe17d1d4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This note provides a bit of a warning or tip regarding naming
BSP layers. The letter of the law dictates that you don't
need to prepend a BSP layer name with the string "meta-".
However, scripts exist in OE where the naming convention is
assumed.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 0375349fdd3cd5ff8a54db8124d5cdc02133ff12)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7029]
I was missing the "sysroots" part of the path. I added this
to the pathname.
(From yocto-docs rev: 077efc8063ed01ef4067f7e71912dd52c1f6a4a6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Crown Bay is short on life so I swapped it out for the eMenlow.
(From yocto-docs rev: 6d5394c12a374463cb1d5215af88178b63a5b8c0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The yocto-bsp and yocto-kernel tool output for the examples
were updated to be current.
(From yocto-docs rev: a05b1df35c7518027b1eb73f9ea2b6a3d00dca43)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added descriptions for the following variables:
EXTRA_AUTORECONF
KERNEL_IMAGE_MAXSIZE
UPDATERCPN
AUTO_LIBNAME_PKGS
DEBIANNAME
DEBIAN_NOAUTONAME
TCLIBCAPPEND
PACKAGEGROUP_DISABLE_COMPLEMENTARY
CLEANBROKEN
DISTRO_CODENAME
BASE_WORKDIR
DISTRO_FEATURES_DEFAULT
DISTRO_FEATURES_LIBC
Part of adding new variables is checking to see if a previously
undocumented variable is used elsewhere in the manual. One
occurrence was spotted and turned into a link for this list.
(From yocto-docs rev: bb75387b7aa4fcb0b594d300772952d81a651644)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default, making a file will not include the PDF version of the
manual. Some manuals you can't do a PDF version anyway (i.e.
yocto-project-qs and mega-manual). The PDF versions do not need
to be part of the mainstream make process. If someone wants these
they can take the extra step of doing 'make pdf DOC=<manual>'.
(From yocto-docs rev: 16f605350adb1b252b94e921faf282d0634cefb6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Covering CentOs to 6.x and the debian stuff to 7.x
(From yocto-docs rev: fa7d6f138506b90330c52c1dbe3a56e40a34a97e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I need to get back to how it was working and then fix the table
box issue from there. Using the 1.76.1 stylesheets makes the
build too long for the manuals and sometimes the XSL sheets do
not load.
(From yocto-docs rev: 7bc502fa069fdc4aebf5705513bb82127716859f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was pointing to a poor example in meta. I substituted
in a better example and rewrote the section to flow better around
that example and the final fabricated one.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: c7f07a2993d5c1b8e0c8b7da0e9d4c28242a5e26)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a sample string in this tree that ended in "ro" when it
should have been "r0" (as in release 0). Anytime you update a figure,
the modified file must go in both the "figures" directory of both
the manual (dev-manual in this case) and in the mega-manual.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 8e75cc23fbf03f355fade416a12b7c8fe1e656a5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: ea4489f856417d70b54a7e38da32e068cbd54cbf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I applied (in spirit) the changes here... Some literal and some
with changes.
(From yocto-docs rev: 0ccf8a43264981accbe42f729c723804e5b69b72)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The way the explanation for adding the BSP-specific files did
not take into account for layers that might support multiple
machines versus a layer not supporting multiple machines. I added
more explanation that covers both scenarios to be clear.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 3f00f0bb830665f8711c68aa6110b8399e867345)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Crown Bay BSP now only supports VESA graphics. Because of
this, some of the examples in several areas of the BSP hierarchy
were wrong. Changed accordingly.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: b61f013a086a9135a86eedf2884fd1b07f798165)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the choices and version numbers of the "yocto-bsp" section
of the BSP guide to match the current development utilities.
(From yocto-docs rev: 0f8472ffa2bc3ae762587c4e2345a4d9850608ed)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The directory structure no longer seems to support two flavors
of the BSP: one with EMGD and the "noemgd." Only the "noemgd"
remains. I have updated some of the examples here to reflect
the current directory structure and sample configuration code
for the BSP.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 64fc4a7a6d69eb99dcd3d8c5e388810e7052ad75)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* small number of typos fixed.
* documentation corrected in a couple places.
* for most part, reduce line lengths to 80 for printing.
I was going to fix just a couple typos, then figured that while i was
there, might as well do some cleanup, mostly in the area of reducing
line lengths to 80 where possible for printing. feel free to comment
on any other possible aesthetic fixes, i can add them and resubmit.
(From yocto-docs rev: cfe4c061d8691e128933b81693aa42c809ef5486)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes the issue where the lines for the manual revision table
are not appearing. For some reason they do not appear when building
the docs using Ubuntu 14.10 and the "current" XSL transformation
files. So, I backed up to the 1.76.1 version, which is the nearest
version where the issue does not surface.
(From yocto-docs rev: 82b15986b97b9ed082b652b562eaaf843572fdff)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update entry for IMAGE_BOOT_FILES with information on glob
patterns.
(From yocto-docs rev: ad3fc0061e3f4dc3ecc6b0a101685c301c5690e9)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5463]
Updated the notes in the TUNE_ASARGS, TUNE_CCARGS, and
TUNE_LDARGS to indicate that the BSPs select the tune and then
selected tun affects the tun variables themselves.
Also combined the TUNE_PKGARCH and the TUNE_PKGARCH_tune variable.
We really don't need the TUNE_PKGARCH_tune variable as it is simply
the TUNE_PKGARCH variable with the override.
(From yocto-docs rev: dabc624272a9bb4cf5e62dee664ba729a9887208)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 914c482bd89071ab34b3381e3bd8065f871cc047.
I had to revert this change because it broke the footnote behavior.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Creation of a PDF version of the YP Quick Start is not supported.
The <mediaobject></mediaobject> code appears in the manual for
that purpose only. It is ignored during HTML generation. Thus,
I have removed it from the file. The image is actually displayed
through the <authorgroup> definition, which is located in the
CSS stylesheet.
(From yocto-docs rev: 322ae6450dfac9b2054b33334898a078fdd20902)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I discovered some artifacts and inconsistencies with how the YP
Quick Start was made. I made the following changes:
1. Changed the structure of the QS from "article" to "book"
as it is a separate book. This change doesn't fix anything
but it does bring the XML file closer to passing validation.
2. Removed the <abstract></abstract> tag. This tag was in place
simply to display the PNG file for the Yocto logo in the upper
right part of the first page. After turning the QS into a
book from an article, the title could be displayed as a PNG
file similar to the other books. This change solved two issues:
1) removed the empty "abstract" element from being displayed in
both the mega-manual and the PDF version, and 2), brought the
author and look of the first page into line with other YP
manuals.
3. Removed the old PNG file used to display the Yocto logo at
the top of the QS. This file was removed from both the
yocto-project-qs and mega-manual "figures" directories.
4. Added a new "yocto-project-qs-title.png" file to both the
yocto-project-qs and mega-manual "figures" directories.
5. Updated the "qs-style.css" file's .authorgroup element to
match and behave like the other YP manuals. This effectively
correctly displays the title PNG file for the QS.
6. Updated the Makefile area where the TAR files are made for
both the yocto-project-qs and the mega-manual. I had to
substitute in the new PNG file for the QS one and had to
add the title PNG to the mega-manual part.
(From yocto-docs rev: 914c482bd89071ab34b3381e3bd8065f871cc047)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The DocBook type at the top of the file indicated chapter
when the actual block of XML is article. I changed it to article
to be consistent.
(From yocto-docs rev: 5350426c11abc2fa4b1418a2d215cd8814745ef9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the example that creates a new BSP layer by using the yocto-bsp
script, the final step 6 could be interpreted as the script
creating the new layer in "poky". Even though the sentence is
technically correct, sloppy reading could mis-interpret it. I updated
the sentence so that nobody will be confused.
(From yocto-docs rev: 7c2bed2aa6f8c189ed9cabff6e4d4d9557238702)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6158]
Updated the style scheet file to format glossary variables in
such a way to allow for a PNG file of standard size to be
displayed below each variable. Right now, the PNG file is a
generic placeholder. Each variable displays a PNG file.
Updated each variable to include that PNG file.
(From yocto-docs rev: 24b7b847b7093022a49a014395df0c3a8c019331)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5400]
Per Martin Jansa, added some information in the bullet item that
talks about the tools and the cases that can cause issues when
tuning things by machine or architecture.
(From yocto-docs rev: e8e47828df65abdc18bbd681c47719a7df77b00f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5400]
I applied some review edits to this section as suggested by
Richard Purdie.
(From yocto-docs rev: a1898cf65537e732e0e42605bb28d636077e7f56)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5600]
Added a <info></info> tag pair with a short description of the
variable to each variable in the glossary. The short description
is what will be used in the documentation.conf file. Scripting
from engineering will pick up the variable description
automatically. The information between the tags does not
appear in the HTML or PDF output.
(From yocto-docs rev: 57fb9100e377a96c330be20613c5895b25910022)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5400]
This is the first draft of a new section on multi-machine builds.
(From yocto-docs rev: a47fd17295d943bff482a0747f3b2e69831aa985)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The LTTng Documentation website has been updated to actually
have extensive documentation now. Previously, in the profile-manual,
we were stating that documentation did not exist, which was true
at the time of writing. I updated the section to link to the
main LTTng documentation website and altered some other text in
the section appropriately.
Additionally, I found and corrected a couple spelling errors in
this chapter.
(From yocto-docs rev: 6e03bd6b90726904a1ac54b8f16f6554b4bb22b8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced the 1.7 strings with 1.8 so that all links in the
mega-manual are self-contained and properly resolve.
(From yocto-docs rev: 49f4b02c999ff2c3c78111673f6760f5fde2b82e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added an entry for the 1.8 release stating that the release
is slated for sometime in 2015.
(From yocto-docs rev: 9799a7848f24024048eae0cbed470a2be4b4b879)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor wording changes and a new section added for local.conf
QEMU changes. Also, reordered some sections.
(From yocto-docs rev: 65207b6afa6df7d82cd3482d61f10b308da6fac7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the section to account for some new variables and
several more ways to run tests against expanded targets. Also
added power control section.
(From yocto-docs rev: a0f08466c00ae51a99d790fa6c9dccef2e0f1518)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added Debian 7.5 and 7.6 to the list.
(From yocto-docs rev: 35fd5d5399fe1759158aef19d7b6eb68f2a1af12)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied the third set of review comments from Paul Eggleton to
some variables.
(From yocto-docs rev: 2be5bc26a6fda1922ee73a874522180633d33b98)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For consistency, I changed the introductory sentence to the
variables that function when inherited.
(From yocto-docs rev: 6ba4fe635c45abf7692f4be0a09ede89a89ec9fa)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These edits were minor with the addition of some descriptions that
had to be fleshed out. All comments from Paul Eggleton.
(From yocto-docs rev: 4ae7c5a5e5aa23307e28de0832d379145c4ef8f1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added ASSUME_PROVIDED and SANITY_REQUIRED_UTILITIES variable
place-holders. There is no text there yet but they are there
for placeholders.
(From yocto-docs rev: adfa77dc597303dcff0e95fd4b3ffd5ae2fb08d5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also fixed an error in the compress_doc class.
(From yocto-docs rev: 3c3532ec4f3ab5985ea3c2f3689ab5cdb7e16bad)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Improved the formatting of the two examples that show where
sysroots are written.
(From yocto-docs rev: 7807e8a727e1e70c2537ac9ead2ad15305c656ca)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a single occurrance of this that used angled brackets
to denote the target (e.g. <target>). I replaced the formatting
with the <replaceable></replaceable> tags for consistency.
(From yocto-docs rev: 4e013136c27d68f89854e78cbf354583d51aa2a8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the manual I was using angled brackets to denote user-supplied
input values. This was confusing so I changed to using the
<replaceable></replaceable> tag pair.
(From yocto-docs rev: dc73a78f11038a1ff04b16867e7513f31f02374b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Throughout the manual I was using angled brackets to denote
user-supplied input. This is confusing so I changed to using
the <replaceable></replaceable> tag set.
(From yocto-docs rev: 79ec3f1b1330539ab2b3bdfb1c94e58c2d0feead)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Throughout the manual I had been using angled bracket sets to
denote user-supplied input. This is confusing and better shown
by using the <replaceable></replaceable> tags. I scrubbed all
the chapters and replaced as needed.
Some other minor formatting changes were caught and fixed during
the scrub as well.
(From yocto-docs rev: 9a668574dd18828a750cfa2e8c28e1f089a19609)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the new QA Warnings and Messages chapter to the list.
(From yocto-docs rev: aab515c793107b7c0b3a8a26f522cf26461fd3d4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed some minor issues with build-deps and file-rdeps.
(From yocto-docs rev: b4250c9ba7d6a3d30c3dfb94d9e2e2eea6b47764)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Forgot the word "class".
(From yocto-docs rev: e54102d2a5df3f703e4ab23ed9062ef2abf7315b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed to change wording to state that the class uses out-of-tree
builds.
(From yocto-docs rev: 2fbaeba33988e14a97d5946f7e714a1bbc5a3ccb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied the second round of review edits from Paul Eggleton.
Minor fixes.
(From yocto-docs rev: 2c7c45c8f09b724e92e8b59fe47834226b44b4fb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied the full set of first draft revision edits for the
new migration section for 1.7. Comments from Paul Eggleton.
(From yocto-docs rev: 90586addbc719ecaf7c768b267adf0e988e27b74)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The figure needed to be updated to reflect that build-id.txt
is now part of the tree and not build-id.
The publication scheme dictates that figures are kept in
individual manuals and in the mega-manual figures directory.
(From yocto-docs rev: 0711a3e41c42eb058db25ff2ea7f1c0982e06963)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This file is what is written now rather than build-id. I changed
the file name and noted that it also contains the full build
header information as written out by BitBake during the build.
(From yocto-docs rev: 7e55b4b5f9e27f6ac5d8f1eab4923bf1b8a712c6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the linux-yocto 3.4 kernel from the list in the
section describing which kernels we support. Also, added
the 3.17 linux-yocto kernel to the list.
(From yocto-docs rev: 41f57a9abe1201ed2fb657f8441c97f86f75200a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This variable has been replaced by the KERNEL_MODULE_AUTOLOAD
variable. I updated the description to note that and to provide
a cross-reference to the new variable.
(From yocto-docs rev: 8b2f464f7d100db1c585ccc62d7cab89f7f7b164)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added this description to the variables glossary.
(From yocto-docs rev: 3da322f92d5028e96422e0c1f5df78b285f2355e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added this new variable to the variable glossary.
(From yocto-docs rev: d2d75631777f6cef3472bde428ed65419c99457e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This description was a bit confusing with the way the general
syntax was described so I re-wrote it a bit. Also, added the
requirement that if you use module_conf for a given <modname>,
then you must also include the <modname> as part of the new
KERNEL_MODULE_PROBECONF variable.
(From yocto-docs rev: 15b7819a0d9946ad6565576a6f28897e2dd724f9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the ref-qa-checks.xml chapter so that each QA warning
or error message would generate a permalink that is suitable
for searching from the poky codebase. To implement this, I
had to embed an id marker in the <para> tag that precedes each
<code></code> tag pair. The 'xxx' string of the id is the leaf
portion of the permalink.
This creates the following tag construct:
<para id='xxx'>
<code>
some-warning-or-error-message
</code>
</para>
The permalink is generated with the help of the new
qa-code-permalinks.xsl file, which triggers on the
<para><code></code></para> construct. This new file resides
in documentation/template.
Right now, this construct
is unique to the ref-manual's chapter on the QA error and warnings
chapter only. However, if for some reason that construct is
used in any other part of the ref-manual, a generically numbered
permalink would also be generated.
The ref-manual-customization.xsl file was also altered to include
the new documentation/template/qa-code-permalinks.xsl file.
Reported-by: Paul Eggleton <paul.eggleton@linux.intel.com>
(From yocto-docs rev: aec27a9f8337575d31bfe0066563da99259046e0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added "October 2014" to table for all manuals that have the
table.
(From yocto-docs rev: 3f9ceb4dd2397fe907bf701c842277eb65d11a56)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reversed order of the list presentation and re-worded the static
library sentence.
(From yocto-docs rev: 5c32730550629527f6ceb2140df31a097f7a6081)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the section to have two lists of features. One list
is for features that work only when you inherit the core-image
class. The other list is for features that are available for
all images regargless of inheriting this class.
(From yocto-docs rev: 9d1bcab2a9264e64db2dec66247aaf55493ae362)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The list of features in the section was out of sync with the list
of features shown in the comments of the core-image class.
Additionally, four of the features are available to all images
regardless of whether or not the core-image class is inherited.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: e4821fd0a63e906da8b1ff015fb4970e5e62d667)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the following:
efi
pcbios
phone
qvga
rtc
vfat
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: b3fe96df8552921cb6494a72d721fa6b41a70a3b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a space-separated list and not a comma-separated list.
(From yocto-docs rev: 23cf09ac128289e878bbc056e28060008ab5217c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a small sentence to note that this class is a good class
to use for extracting and installing propretary binaries.
(From yocto-docs rev: adde5e66f46df0b4e21bfe0fc0b47a9a8bed5e0c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Corrected some wording and also the first example.
(From yocto-docs rev: d641cdbf697b14d8122b3a018b06eed3437011ad)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bulleted item on supported BSPs was very centric on meta-intel.
I rewrote the section to not be so exclusive.
(From yocto-docs rev: d8118bb6124fbbb2340ae8720cd6187fd5546967)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5482]
Added a cross-reference to the meta-selinux layer in the section
that describes how to make images more secure.
(From yocto-docs rev: 0c96273ee857808046c5a76517c1eda4aa703c81)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a short note after the example that shows how to set up
the EXTERNALSRC variables stating that the externalsrc class
needs to be either globally or locally inherited.
(From yocto-docs rev: db935135c0b060e06f6a63530df995d286002598)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new example on how to set this from the recipe or the
recipe's bbappend file.
(From yocto-docs rev: bc0d9de3378f3462729301e74419b7dede17558b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found another occurrance of where I needed to add a <replaceable>
tag set in an example.
(From yocto-docs rev: 586e5a590bb5382a28fde4670fdcd6cbb75f6c32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I missed a <replaceable> tag set on the example. Adding it
clears up confusion for how to use the variable.
(From yocto-docs rev: 8bbf2a012e580d82aaf9c9a98ad5dab1aea64f7b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was confusion about how this actually worked when you
do not create a package for a package listed with the variable.
Cases for when the build would throw an error or not had to
be clarified.
(From yocto-docs rev: 02f95339322afe53db816b3b73234490d835b1ca)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Added some text associated with the screencast we link to that
calls out the fact that the screencast is somewhat dated but
still useful.
* Replaced all user input in examples so that they are formatted
using the <replaceable></replaceable> tags.
* Fixed a few places so that they use better and clearer wording.
(From yocto-docs rev: f99536a7581ef9b8b57a446b65e4ebb902b4e4b1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Found and fixed several areas with issues.
* Scrubbed for user-supplied input to make it use the
<replaceable></replaceable> tags.
(From yocto-docs rev: 0e1c7ad31921ee7d4ee0d7d4ece01303a25a5d60)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6621]
Applied a few review edits for this fix.
(From yocto-docs rev: 99511bbcfa1de2f7bf691da1a002913f3a7f6034)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6629]
Added a new variable description to the glossary and also updated
the IMAGE_LINGUAS entry to have a back-reference to the new
variable.
Reported-by: Laszlo Papp <lpapp@kde.org>
(From yocto-docs rev: 219097735c57a3dc10195511dd5b199e73b8a094)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6621]
This is a new variable that helps control how debug symbols and
source files are split off when creating -dbg files for use with
GDB.
(From yocto-docs rev: 506b79707f6aec7c14f1f9d7e5099d20fca45c0e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For firewall performance.
(From yocto-docs rev: a866449b4caf1c0cee4ce00ec7d8fa2119a0b481)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I replaced user-supplied variables with <replaceable></replaceable>
tags to get proper formatting. I inserted several references
to the new QEMU chapter for help using QEMU. I updated a note
on the BSP available so that it is a bit more generic and not so
dependent on an exact list within meta-intel and the source
repositories.
(From yocto-docs rev: daef4406e7c3e45dd5d98d565e519d91939f6965)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced angled bracket items for user-supplied variables
with the <replaceable></replaceable> tags.
(From yocto-docs rev: 393af6c0cfbfc0f3921bc1eb1fdbd3dd734f51ae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added some links and fixed up some replaceable items.
(From yocto-docs rev: 5c9ce934f13c68c2efbd952f399a8b88e87eb761)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6620]
I altered the path name of the .gdbinit file in the text to prepend
~/ to it to reinforce what file the user must modify. I also removed
the /home/jzhang string in favor of ~ to make it more general.
(From yocto-docs rev: ff09d3a5666c97598adf385f63dee4b30b0f1792)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I'm guessing that the OE wiki page for bitbake is the closest thing
there is to an "official" bitbake web page, so i'll just use that as a
replacement for all berlios.de links i run across, unless someone has
a better suggestion.
(From yocto-docs rev: 36bafb65e96752631d71afca86dcebda6ba1a876)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This list has grown substantially and it is impractical to list
the directories that contain image recipes out. I left the
"ls" command that the use could run in order to see those
directories. This makes the section of the manual much more
maintainable.
(From yocto-docs rev: ee129f578dfa986937b45b111e0e26b61b42c565)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The image list has grown to where it probably could use some
structure. I ordered the list by alphabet.
(From yocto-docs rev: 4ee03974d9a58d2b49af3ae4cafe9ac181627c86)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added this image to the list of images in the "Image" chapter.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 29161a98f2bacc6fac77fcb11c2bfe1c905167f8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The initrd image used by the Linux kernel is list of file
system images concatenated together and presented as a single
initrd file at boot time.
So far the initrd is a single filesystem image. But in cases
like to support early microcode loading, the initrd image need
to have multiple filesystem images concatenated together.
This commit is extending the INITRD variable from a single
filesystem image to a list of filesystem images to satisfy
the need mentioned above.
(From yocto-docs rev: 051ef2e4d6480b28d21a59a79b6f0dca1a5944bd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the "svk" protocol and added in the ClearCase one.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 21b241990dec9b7beeeec639ac6c6e9b22f2b871)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor review edits from Max.
(From yocto-docs rev: c70de50aeceda60db92c5e488bde8fe910eaeba1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits from Paul to better word this section.
(From yocto-docs rev: 51425ab506050ee5ba30d5c3c10639d5a1b8cc8e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These catches are from Robert P. J. Day and applied as a
patch.
(From yocto-docs rev: b805795e9bf68286aa5b79a94792e2fefd293b92)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Accidentally put in a couple different things in this one commit.
Oh well.
1. New wording for how the user needs to figure out some checksums
for a recipe.
2. Fixed up some note placement in the wic reference section.
(From yocto-docs rev: 6c13f49c265c99ddd6dcd4ec3c3c8e66b78824e0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
One has to do with the weird names the build system creates based
on DESTDIR and other variables.
The other has to do with -native recipes not buiding correctly.
(From yocto-docs rev: 32a444a258e3c7c87fdc015475f54e5b34628246)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #641]
Added a new bullet to the list that overviews what the manual
covers.
(From yocto-docs rev: 54bdb50df3951346a2e926700681db55bd59a2e1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Pulled a note about future support of commands and options from
the bootloader section and got it up in the higher level intro
section for that part of the manual.
(From yocto-docs rev: f8d677301abcd0d549ea9ad4cca79f43cb2db7f0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #641]
New chapter added that covers the YP instance of QEMU.
(From yocto-docs rev: 7ca17d02364af7e5924e23df6c138ab4dd2203d6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section on wrting a new recipe suggested using a "build-fail"
method to get bitbake to return exact checksums for code. It
was pointed out that this could be a middle-security risk and
that we should not do that but instead get the signatures from
the upstream website. However, many times those sites don't
provide that information. I re-worded the text to note the
ideal method (upstream checksums) and then resorted to the
"build-fail" method as a "way" to also get them when the upstream
location does not have them.
(From yocto-docs rev: b06699de2f512b01600bf952a8ee928c2a4c358a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made some small edits to the section based on Tom Zanussi's
review.
(From yocto-docs rev: 560ea7b0eb131e59b190a34cadbe77729e76d61c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a bogus link in there to the Build Appliance page.
I also noted many links that use the <ulink> tag that crossed
multiple lines. That is not good. I cleaned all that up.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: a39cea47cae29d7efb8e12495e8eefb484d464c4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a set of fixes for miscellaneous dev-manual updates noticed
while transcribing wic help for the dev manual.
(From yocto-docs rev: fd2205e2778e2cef86561025fd904f303d64586a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
--fsoptions support was recently added to wic, so document it.
(From yocto-docs rev: 91efb698eea438083474c1e905dbaad3fffdbd81)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
squashfs support was recently added to wic, so document it.
(From yocto-docs rev: 22ca1141953b4fae92e15126da296d3d95e80c25)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new section discussing plugins, taken directly from the
corresponding wic help section.
(From yocto-docs rev: c1b4c378a496413f2dde8ad2f043a537cba24b6e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6511]
Added a new example to this section that shows how to package
up binaries so that you can add them to an image.
(From yocto-docs rev: e52acc444c8f142d0469d7274fb936b5242306ec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add in a few links to member orgs, and update the BitBake link.
(From yocto-docs rev: 481c89e9b8e219358db8bfdfff0b5b0150247c07)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recipe should be named "foo_1.3.0.bb" instead of
"foo_1.3.0-r0.bb".
(From yocto-docs rev: c34c3ea05d550fc85ab04036856704a7c04fd64c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We want to encourage installation of the buildtools tarball for
getting the most up-to-date packages on this build host.
(From yocto-docs rev: 5298737a5ad579ea5097221d2ef5a0f388ebff6c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the section on 'wic'. I have dropped in the same exact
section from the 1.5.3 (dora branch) release as a starting point
for Tom Zanussi to scrub and update for the master branch.
(From yocto-docs rev: e189992bff4249664ba959b1c440541e0b84e03d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6499]
Fixed a couple example INCOMPATIBLE_LICENSE examples so that
they now use the canonical licensing names GPL-3.0 LGPL-3.0 AGPL-3.0.
(From yocto-docs rev: d2d6be323d1a5ed9da88b7924954f9733a78da84)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced with packagegroup names, the newer form.
(From yocto-docs rev: 5492b0669acc9ce8a8ee1a00dfdc7e9f2b98a5c4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* INITSCRIPT_PARAMS - noted the default
* INITRD_IMAGE - added a reference into the image-live class.
(From yocto-docs rev: 152cb93ca591c46a1344f2f09e0f85f14519ddf3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The note did not need to be there.
(From yocto-docs rev: 5ff94a1a412447c1ed1cda64e985b52545ccd9e7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I found an occurrence where we were refering to the removed
task do_package_write. I changed it to "do_package_write_*"
(From yocto-docs rev: 4e989f2df1cf74c81ba9d02088addb79012762a7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6499]
Updated three areas to include similarly licenced components
regarding the use of non-GPLv3 licensing.
(From yocto-docs rev: 88c0720e4070be58fbde17bc04db2b53c3307bf8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Discovered that the sed file was processing the bitbake-user-manual
just like the others, which was wrong. the BB manual is not included
in the mega-manual so the links there need to be left alone. The fix
included specially creating substitution lines to handle all the YP
docs while excluding the BB manual.
(From yocto-docs rev: f2c99c6a66c3f67ab226f317dfae195294ddafea)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed a reference that was not linking to the manual but
was instead referencing the Source Directory structure.
(From yocto-docs rev: aae3fb868e95ef2dbd548a5f9d1ea61a013190cd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Conflicts:
documentation/ref-manual/ref-variables.xml
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added several cross-link references for the LICENSE_FLAGS and
LICENSE_FLAGS_WHITELIST variables. Note that the cross-references
previously put in for LICENSE_FLAGS were slightly wrong as they
were using the <ulink> tag instead of the <link> tag.
(From yocto-docs rev: dc2769c63d24d3650c993cfd48bcb4540ad36ca2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed to add several links to the newly described
LICENSE_FLAGS variable in the glossary. Three links added to the
ref-manual and a single link added to the BSP Guide.
(From yocto-docs rev: 2ca6e556c299814d6ef847ed059a4f0a2d48adb3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the ref-manual, I added a new variable description for the
PTEST_ENABLED variable.
In the dev-manual, I added a note to the "Adding ptest to Your
Build" section to mention that the OpenEmbedded system uses
PTEST_ENABLED to enable or disable building ptests and that
the user does not set this variable directly.
(From yocto-docs rev: 52d6608caaa25378b873e41e1ddd05356ff8629a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a bit about values being passed through the
update-rc.d command and then a reference to the command's
page.
(From yocto-docs rev: e007414608ed801e440b701d6c43dca955a11611)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* For "Architecture did not match" and "Bit size did not
match", added the missing QA check name marker [arch]
* Under the already-stripped entry, added a final sentence
(to the paragraph before the note box)
(From yocto-docs rev: 7c3bda03a4424d1e083403266c570b34fcab9bbf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the link into the section for understanding how
OVERRIDES work.
(From yocto-docs rev: f897b9d0cc51899f3e4ce05b69a3c1dd429780d7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section heading in the BitBake User Manual changed.
Consequently, the lone reference in the YP doc set to that old
section became incorrect. Fixed the link.
(From yocto-docs rev: f4ecea15d62fd0eed83f03d370b20bde95f3936d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
More detail added.
(From yocto-docs rev: 84177a600f84af4cc41b9493b46e2a23bc7ccc19)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5772]
Updated the customization layer to include the file that generates
permalinks for the variable definitions.
(From yocto-docs rev: 4b981d3fe30b609b08f22ee0e1e03eee6dcc0b5d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5772]
Updated each manual's CSS style sheet to contain a style for
how the permalink symbol looks on its own and how it looks
when a user hovers over it with the mouse.
(From yocto-docs rev: c8d4afa0b83a40ac2de0c47c191a11b3e7d241e5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5772]
Updated the customization layer to include the file that generates
permalinks for the variable definitions.
(From yocto-docs rev: adfb6f06fcba2045e56353bcff0df1df9106544c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5772]
With this template, all that is necessary to trigger permalink
generation for variable entries in a manual's glossary is to
update the customization layer to include the gloss-permalinks.xsl
file.
(From yocto-docs rev: aebe1a727be7921fe9bc26101b670d5fdc1670e4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5463]
In addition to adding these two new variables, I did some cleanup
of the TUNEABI variable description for consistency.
(From yocto-docs rev: cf5c5fd0cb262b8da030ac923fda902d9e007b21)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New glossary entries.
(From yocto-docs rev: dbf566e1009d51ad8fce1ac8251249a70fb9270c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New variables added to the glossary.
(From yocto-docs rev: 903ed6d26d7d32e4c1237fa9fd44b7471f1a41f2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO 5463]
Added the TUNE_ARCH variable. Also placed a cross-reference to
TUNE_ARCH in the TARGET_ARCH variable.
(From yocto-docs rev: 85d2a49323e0040b263b6d7f08fd036a25297b05)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These types of references cannot span multiple lines. If they
do then mega-manual.sed will not process the link in the
mega-manual.html file.
(From yocto-docs rev: 8a06542c0f1fee503eda12052adddaaf9c94ca91)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This line was left out for links with no target. The line is now
in there.
(From yocto-docs rev: 5a27a32261628b7d4f60981cfe624f08d8cf1535)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1949]
Updated the following tasks to note that they "clean" out some
areas when run:
do_populate_sysroot
do_deploy
Also made some notes to the do_cleansstate task about attempting
to clean remote mirrors.
And, made a change to do_cleanall to specifically mention that
DL_DIR is cleaned.
(From yocto-docs rev: 7e532b17ccd89e43d3661c733ce1f06a52066c29)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5566]
For the dev-manual, I created a new section called "Working
with Source Files." In the section, I cover how to set up mirrors
and also how to pre-fetch source using the bitbake -c fetchall
<target> command.
For the yocto-project-qs, I removed the mirror information in the
"Super User" section, which became redundant with the new section
now in the dev-manual. I also, removed the fetchall variation of
the bitbake command. Both areas reference into the new section of
the dev-manual now.
(From yocto-docs rev: f314061e3e752d35ea85ed16a60f7f9292180921)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3729]
I made an editing pass through this section. Found some minor
corrections.
(From yocto-docs rev: 314ec3a066de7328b6c6893ce33cc0e5faa8700a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5895]
Some minor edits to the section. I found a grammar error and a
mis-wording.
(From yocto-docs rev: 86e85512279a1379d9b30825d6af3e508faa320a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4958]
Added a new section to start the Migration chapter. This
section will hold general migration issues that are not tied
to a specific release.
(From yocto-docs rev: e78ae7c64ae5fa7e7a5b1f804fb40b5690a4e899)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul reported that "buildimg" was being used as the class name where
it should have been "bootimg". Not quite sure how this slipped through
but it has been fixed now. There were five occurrences.
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: fdd6a6725bd22e4272a99a3da179cd69c4a221a1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a note at the end of the section to point to a wiki page
with more information.
(From yocto-docs rev: ba310c34844e9e496d7ff1164691930d4f330f93)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was a stale link. Updated to point to the published
HTML file now and to mention that you can find it in the
Source directory.
(From yocto-docs rev: bc51935372cfd81a77f201768173d8b1eb1677c4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I scrubbed the manual set for appropriate places to reference into the
do_clean* type tasks. Found and added several occurrences.
(From yocto-docs rev: 01594823b1d556bc70e928af1838039cc15a816d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6430]
The style sheets were carrying over old .PNG files that are not
part of the manuals. I have removed the statements that were
using them.
(From yocto-docs rev: 6e4fa419b9367ab5e34b9aa8010a24980416dc7d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6400]
Replaced the sentence in the note to specifically note that the
genericx86-64 BSP has been added for 64-bit Atom systems.
(From yocto-docs rev: ad2cbe806580c880708e5e60435046b07258a537)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a ptest section to the "Moving to the Yocto Project 1.6 Release" section.
Fixes [YOCTO #6400]
Added a new section named "Package Tests (ptest)" to the migration
section stating that ptest is built but not installed by default.
I also added some cross-reference links to a usage section and to
the ptest.bbclass section.
(From yocto-docs rev: f752867265a1299b1d2790ae59a990a7991a6108)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Failure occurs during make, not do_compile as I previously
noted.
(From yocto-docs rev: 467ea8aa43fac14e3092a30ae15d1ace7a6558ab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6390]
Edits to the "Debugging Parallel Make Races" section. Changes
originating from trying the procedure.
(From yocto-docs rev: 537f5bd8918450e30ea87465025f0069232cb229)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6390]
This is a section on parallel make race situations. The draft
is the first cut at the section.
(From yocto-docs rev: c225d7fe121270a6f82b9fbffa78c7e3914b113d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was inconsistency on how we refer to a task name throughout
the YP manual set. The proper way is "do_<taskname>". Some
occurrences did not include the "do_" prefix. These have been
fixed.
(From yocto-docs rev: b32821bb0d3e6de7bca68b25c662a023526a10c4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed a view wordings to more accurately describe what was
going on. This was feedback from Paul Eggleton's review.
(From yocto-docs rev: 6152a849c0e26178ce13a29b1f353d1b2912427c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The prefix is used for DocBook 5 Schema. We are using the
4.2 Schema. Having this prefix disabled the permalink titles
XSL template (section.title.xsl) produced permalinks with no
titles. Because I removed it in the section.title.xls file,
I also removed it here for completeness. Note that I don't
think the template is used at this point but I made the change
just in case for the future.
(From yocto-docs rev: 8eca4299d0408c1095bfa8aa7b9f04e246db0c0d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Restoration of some parameters to make sure the TOC
is generated correctly.
(From yocto-docs rev: 0f4c4b526fd0e8c3cce3fc033c660112e5dc517f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The mini-TOC was not being generated for the appendix
sections. I added the xsl:param to add it in.
(From yocto-docs rev: 3c083e697b8b6cc639885da45830ce9c4170b00e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Not having a section was messing up the TOC for the
FAQ in the mega-manual. I added a section.
(From yocto-docs rev: d4a34cb1815e3e12e73e08b5ae7b2027b5f03823)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5772]
Added some code to suck in the XSL templates that support
permalinks.
(From yocto-docs rev: 713a17465df48de2ece3845bbd7a8bf972e353b0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5772]
These five style sheets support creation of permalinks in the
HTML formatted output.
(From yocto-docs rev: 7467ad6518c0fc0eb829b9432dc113bd0cdb6807)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have put the disk space requirements up in the general area
describing host system requirements. This specific note for
sato images is redundant and no longer needed.
(From yocto-docs rev: 3cb054c34c62771ae01be6f46817f3b489395867)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added the general requirement of 50 Gbytes of free disk space
to the host requirements. The information was somewhat buried
later on in the manual.
(From yocto-docs rev: aeb8a9988626404fcee60758fe7ae808b31af145)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I extended the section to mention where to find YP supported
BSP layers and a bit on how to get them via the link from the
Source Repositories web interface. Changes driven by community
input.
(From yocto-docs rev: 4c944bf33b7d642126c52efd313666270145ab50)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I was mixing the "50GB" and "50 Gbytes" strings. Throughout the
set I have tried to use "xx Gbytes" form. Fixed a "xxGb" form
that I found.
(From yocto-docs rev: 40dfc6ab1c5c928bedc301ce323af08aa0b7be59)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a bit more to the ending of the sentence to qualify
its meaning.
(From yocto-docs rev: 40b309a43d948d5800cfe908e72f6202c095a166)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3729]
I have made an attempt at understanding this and creating
a section that describes the steps the user needs to take in
order to build out-of-tree modules on the target device when
running an SDK image. I created a new section called
"Building Out-of-Tree Modules on the Target". Basically,
the user needs to be on the target and change to a directory
and then create some scripts before attempting to build these
types of modules on the target.
(From yocto-docs rev: e0754ae6dbc5dc07fb6707fe4b71ecd95c8180dc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Received and implemented some feedback from Paul Eggleton
on this section. These were unsolicited observations.
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: 48ecc543d9f614b5258ab2573f0406aa3c778647)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5895]
I applied some review comments from Paul to tighten up this section.
(From yocto-docs rev: 9f17ad00e9e707fcd6f2419762b4281d64f4ed0f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new "Overrides" bullet item and fixed some minor issues
pointed out by Paul Eggleton.
(From yocto-docs rev: 44ff3d82985fa304c5641570fe72cf6a8ddabaa3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5521]
I created a brief note in the do_fetch subsection of the
"Taking a Closer Look" section to deal with how the build
system uses checksums during do_fetch to re-execute stuff
if a file:// listed in the SRC_URI has had its contents
modified.
(From yocto-docs rev: 7b857635f2663af7c1d5e8aa87239472a5b47919)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton sent me some feedback on this section. I implemented
his suggestions. Changes were minor. One included a cross-link
to the BitBake User Manual.
(From yocto-docs rev: e9b5f252a1368b8c231dd659428a18eacf9757af)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5895]
I created a new section in the dev-manual titles
"Creating a Custom Template Configuration Directory" that describes
how the build system uses the template local.conf and bblayers.conf
and conf-notes.txt files as a basis when creating the real
deals in the build directory's conf folder. The context of this
is so that the user can create their own directory with their own
template files for repeated configurations and to create a custom
conf-notes.txt file should they want the setup scripts to display
some custom list of targets.
I also modified the two script references in the ref-manual for
oe-init-build-env and oe-init-build-env-memres. I needed to
link to the "how-to" section and added a bit in there about how
the scripts go about forming the conf files in the build directory.
(From yocto-docs rev: c07fb7082fe08387bbc546b2a23620dedc7127b8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Writing a New Recipe" section has a subsection named
"Packaging." We needed a cross-reference here to the QA checks
performed for packaging.
(From yocto-docs rev: 34952ee1b56a84e0ee0edd142c7c8c68b122a3e3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added "meta" as part of a path.
(From yocto-docs rev: 14cda136d1f8690f5ea15b218f2ab4fb49c0afa9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5482]
I applied some review edits as directed by Paul Eggleton. The
main feature was to merge the information on setting root
and extra user's passwords. Also, permanently removed the
reference to the wiki that showed the less optimal way of
setting a root password.
(From yocto-docs rev: fef0e17cd3835580abed175ef4a7baf22b9b7673)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added detailed requirements for the three LSB type images
in order for the build to create an LSB-compliant image.
Massaged the weston image a bit.
(From yocto-docs rev: 01fee2bebe76512ab5707212fc8d78df20d83126)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I implemented some review feedback from Paul Eggleton on these
variables:
TARGET_CFLAGS
BUILD_OPTIMIZATION
SDKMACHINE
IMAGE_ROOTFS_ALIGNMENT
IMAGE_DEVICE_TABLES
EXTRA_IMAGECMD
SSTATE_MIRROR_ALLOW_NETWORK
PACKAGE_ARCHS
SDK_PACKAGE_ARCHS
(From yocto-docs rev: 6fd804376367449494d5a5cfeb7e9bb2f4c04de1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5482]
Applied extensive review edist from Paul Eggleton throughout
this section.
(From yocto-docs rev: aa0bcd9199c83b43bad2390ff2292a8c2abe7455)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a couple of examples to show how to set passwords.
This is the -P option for adduser.
(From yocto-docs rev: 2726fcd3b3c2a5144b23af6ab342832c242f85c1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I had the wrong description in here.
(From yocto-docs rev: eafe3fb2324d6361ee799177ffbb3de05795a2e2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5482]
I added some key references to the section on considerations
specific to the OpenEmbedded build system. In particular, I
provided some cross-linking back to the extrausers.bbclass
section to reference an example of adding a user account. I
also split out the topics of adding an extra user and setting
a password on the image in the bulleted list.
(From yocto-docs rev: 19dcd70b9b5aba1bd5e7ce090d5449afcef726bf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a link to IMAGE_ROOTFS.
(From yocto-docs rev: b87975da8f99926f220d11a02b1655245d00f8e1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5482]
I did some significant re-writing and re-organization of this
section. It now includes a bit about securing an image in general,
provides general considerations, considerations specific to the
OpenEmbedded build system, pointers to some tools in meta-security
layer, and some other items.
(From yocto-docs rev: a900286992e781f451b3c180726965f5c7172bb9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the following variables:
CFLAGS
CPPFLAGS
CXXFLAGS
(From yocto-docs rev: 58d82513ef70287717e7e208742aa72196708fc1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the following variables with minor changes:
TARGET_CC_ARCH
BUILD_CPPFLAGS
BUILDSDK_CPPFLAGS
CPPFLAGS
TARGET_CPPFLAGS
(From yocto-docs rev: f7d48ed379778a8568c7e5f812cdb1cbc5339f39)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6159]
I applied some review edits to various parts of the QA chapter
as derived by Paul Eggleton. Also, updated two areas of the
insane.bbclass list.
(From yocto-docs rev: 6529a261961339b747bb3b89b3080ef794244809)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6159]
Edits from Paul Eggleton included some reformatting, some minor
wording tweaks, and edits to a couple tests as described in the
insane.bbclass.
(From yocto-docs rev: b42ef1bd51cb20f6bbb6bf812999e3a35b332339)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the CFLAGS and TARGET_CFLAGS variables.
Created these new variables:
BUILD_CFLAGS
BUILDSDK_CFLAGS
CXXFLAGS
TARGET_CXXFLAGS
BUILD_CXXFLAGS
BUILD_SDKFLAGS
CPPFLAGS
TARGET_CPPFLAGS
BUILD_CPPFLAGS
BUILDSDK_CPPFLAGS
(From yocto-docs rev: 00d1895f56f8d65944549ab216d1e0ccdceea674)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This new chapter is a reference on the default configuration
QA check messages you can get from errors and warnings.
(From yocto-docs rev: 04d766b4e1235ae46df38c4b296cb2729b6a439f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5895]
Both section for the environment setup scripts (oe-init-build-env
and oe-init-build-env-memres) were updated to provide some usage
information on the conf-notes.txt file. This file is where the
default list of images appears that the scripts display upon
completion.
(From yocto-docs rev: 77bd0cd6eeb77036fb7e1584c469f98c2524b750)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits based on feedback from Paul Eggleton.
(From yocto-docs rev: 71bd6b3e0c8f7abcd753240fd8a503b62443ad74)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made sure all formatting was correct and also applied some
cross-referencing for the reader where appropriate.
(From yocto-docs rev: aea5cab493107b2458ecd3bde719115c3f4e02b4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was an occurrence of the do_compile task mentioned in the
manual. I have added a cross-reference link from it to the new
section in the ref-manual.
(From yocto-docs rev: 0981ca8ca9856063d4daeaae155aabdfd1c7dcc8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the creation of the new chapter that documents the 51 tasks
defined by the OpenEmbedded build system, the dev-manual had
many first-instance occurrences of do_* task names that could
be cross-referenced to the new sections. I have added these links.
(From yocto-docs rev: 78f91987b0ad9906571ec7888334301492361822)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the creation of the new chapter that documents the 51
tasks defined by the OpenEmbedded build system, the remainder
of the ref-manual had many first-instance occurrences of do_*
task names that could be cross-referenced to the new sections.
I have added these links.
(From yocto-docs rev: 2ff39bd226a1d8f11924283bbaa3542a9d936ba3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes to support a new chapter on the 51 tasks that the
OpenEmbedded build system defines. The changes include a new
file called ref-tasks.xml, changes to the ref-manual.xml
building file to include the new chapter, and a new bullet
item to the list that describes what is in the reference
manual.
(From yocto-docs rev: a816746051ec025014e515fb848b3e0e58d4c7be)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6243]
This section addresses situations when working with recipe
file names of recipes that have not been released (e.g.
recipe-name_1.0.3.rc1). When the recipe is released the system
has difficulty recognizing the new recipe name as a later version.
So the work-around is to use PV to set the recipe version in
the recipe. The section describes this.
(From yocto-docs rev: 612379f44e772cfc381e31171ae18af24a9e44fe)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The base_contains is kept as a compatibility method and we ought to
not use it in OE-Core so we can remove it from base metadata in
future.
(From yocto-docs rev: b8e7dee82929213e7581d6c598f42da74ee03988)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new section on "Matching Branch Requirement for Git Fetching"
into the BitBake section. Plus, made some minor corrections to
some of the 1.5 sections.
(From yocto-docs rev: 326a8009ca0bef0a4686510bb521010d8f58ac81)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4958]
I pulled the change I put in to warn users about forked packages
based on further review from Paul Eggleton. This pretty much
means the bug is back to square one.
(From yocto-docs rev: fec630e4d1c464865d85e824ec684ef3cee55b42)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The package architecture for armv7a packages with the thumb optimization
enabled will now get a "t2" suffix as it should; this was not the case in the
1.5 release. Architecture names will change within package feeds as a result.
(From yocto-docs rev: 1ce59f6911dd67835266aa3b0e29f404a487fd6e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I was using this term inconsistently. I have cleaned it up so
that no initial capital is used.
(From yocto-docs rev: 7dea2c5ef067d81b8350cd54ba4082c35d7077b1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I get this list from meta-yocto/conf/distro/poky.conf.
(From yocto-docs rev: 796d4eced50d14203f1a791ff557a4016f4dd031)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set the release date to April 2014.
(From yocto-docs rev: 2592bc968edeea941a92e6bdd321dd872745b78c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
I worked with Stefan here to update the section on running tests.
We are good now with it all.
(From yocto-docs rev: 806a89f1ddd3efc39d15d3f7e1a01e8fd69af7c1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created some sub-section structure to better organize this
section.
(From yocto-docs rev: 61b15f579c4c21378277051bb5905baa4e9741b5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added Information about setting up your own server. Paul
Eggleton provided the information.
(From yocto-docs rev: 655bba9b91283dac502658dd72d866a7af4eacce)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I ordered these 39 tests by alphebetical ordering.
(From yocto-docs rev: 3a7ef1c149ee1f8f0ac4709e906f5c84ed7ab642)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5159]
Edits to fix the occurrences of VIRTUAL-RUNTIME_initscripts = "".
I removed it from all places in the manuals except under
"Selecting an Initialization Manager". Note that it still
needed removed from "Using Systemd for the Main Image and
Using SysVinit for the Rescue Image".
Also, in the "Using Systemd Exclusively" section I made some
edits as suggested by Paul Eggleton's review.
(From yocto-docs rev: 28b2e3eba3acff17f165899a7f4a65c98263e201)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We changed the folder name of the BitBake User Manual from
"user-manual" to "bitbake-user-manual". This means the
URL for the variable used in poky-ent for the manual needed
to be updated.
(From yocto-docs rev: 16a616b4a6f8237c8ba220e74f38235ca78c10ac)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
Applied edits to the section in the dev-manual on running tests
on hardware.
Edited the TEST_TARGET and TEST_IMAGE variables.
(From yocto-docs rev: a26ba11c739aabab4009a944d9b622e2814c7fca)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO 5766]
I removed the note about the "live" IMAGE_TYPES. Turns out I
was wrong on this information. It does not create a "directdisk"
image. That is accomplished through a .bbclass.
(From yocto-docs rev: a3b762be9933178e9cecdac3fa9e110c031a64d0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4958]
Added a bullet item to the packages section in the migration chapter
for upgrading to YP v1.6. Item notes the issue and warns the
user to beware.
(From yocto-docs rev: f66ca39a65c2529ebc552d3a816e6565dae183f7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6125]
Did some re-writing based on Jonathin Liu's feedback.
(From yocto-docs rev: bee4a584bcb1e70e9848324781c32d1d9e3d1fc2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
Removed the note limiting this to QEMU tests.
(From yocto-docs rev: c91d058514832aacfb74fd4480e0a2dba95b4921)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor re-wording edits as suggested by Paul Eggleton.
(From yocto-docs rev: 699eec0b691a19b4ae2f05c7774f559898e952da)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4961]
Documented the user requirement to use PACKAGE_INSTALL to specify
packages for installation into an initramfs image. Normally,
you use IMAGE_INSTALL. To account for this user model, I updated
the PACKAGE_INSTALL and IMAGE_INSTALL variables. I also added
a bit more information to the "Images" chapter item that
talks about the core-image-minimal-initramfs image.
(From yocto-docs rev: a1ad649cf310f281a7de584d5b9a1820ca99d4eb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5888]
Applied some feedback to the variables based on Paul's comments.
Needed a caveat on how you can use these variables.
(From yocto-docs rev: ef8fac4b36089d3162ee16c93866a39bcd31701c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5888]
Two new variables added to the glossary. These help with
specifying kernel modules that need to auto-load on boot and
with specifying module.d syntax in the modname.conf file.
(From yocto-docs rev: 1ac544c4f6129faafea10691b426cd510ff56a69)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ran the tool and provided the actual machine branch output
choices.
(From yocto-docs rev: 5b78e70079e2c621221187d4419de2a2427efbc1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This example does not run as described. It said that the
setup script was run and the user would be in the top-level
Source Directory (e.g. poky). The script errors out unless
run from the poky/build directory. So I took out the requirement
of being in the top directory.
(From yocto-docs rev: 800e4001319cde3e665c0271fd5a19646fb2bd7a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I replaced the v3.4 version example with the v3.10 version.
It is more up-to-date.
(From yocto-docs rev: 2e7f5d4fbe24a8248686c9ca7cf870204966beec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was using an out-dated version of the
linux-yocto_3.10.bbappend file. The new version accounts for
both emgd and non-emgd configurations. I had to insert the new
listing and update some supporting text describing it.
(From yocto-docs rev: 97329a154e3dee44cb393d4a289fdcbb9f8adf07)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "require" statements changed from four to three.
(From yocto-docs rev: 36f4fe004e69cb7715d41787d4c22b39371f63b6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recipes-kernel structure had changed for the Crown Bay
BSP.
(From yocto-docs rev: 14ecfc7e676901a6d422f49b0170f27f6b46837f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied this patch from Dennis and then removed some whitespace,
used the 5-space indentation convention for the literal, formatted
the task name and did some other minor fixes.
(From yocto-docs rev: 477a9ecb2f91681ee401478189a424793381bfcb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
This is the section that describes how to enable tests for
actual hardware.
(From yocto-docs rev: fd33b19e7fa32797ab2abd2b506b0d63209fbfc6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
The list of items that described what happens when you run
tests is really specific to qemu. Consequently, it is better
located in the section describing how to enable and get
set up for those tests.
(From yocto-docs rev: 1f0606f1c5c03c873a295819adcfb6fb51c196bd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
In the "Class Attributes" section I updated several items.
(From yocto-docs rev: 8f97671319c4751885e5ec89423a061dd45c6684)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
Removed the final bulleted item. Changed the wording on the
first to account for the manifest file.
(From yocto-docs rev: 50e7557032a0dbf4bc2144e9d4f9a4e1a1726d6d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
Removed the (second) note about rm_work builds, that bug
was fixed. (#5072)
(From yocto-docs rev: f1223a67caae17db1abfd6b7465bfc71d295ab7f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2444]
I swapped out the hardware names for the example in the
"Super User" section. Beagleboard is no longer shipped with the
YP. It has been replaced by Beaglebone.
(From yocto-docs rev: b71ecd4f24dd4c1804c9e8c26aedacbdfaa694a3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
