Make devtool upgrade consistent with devtool add/modify in defaulting to
sources/<recipename> under the workspace if no source tree path is
specified.
(From OE-Core rev: 8a952407b192313515e91570632446b6dff01665)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you for example ran devtool modify virtual/libusb0 without specifying
a source tree path, the default was <workspace>/sources/virtual/libusb0
which isn't correct - it should be using the mapped name i.e.
libusb-compat (in the default OE-Core configuration). Reorder some of
the code to ensure that the mapped name is used.
(From OE-Core rev: c51736df17da8e6e561dd5b7ce59cb08254da870)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As suggested by Khem Raj.
(From OE-Core rev: 36cc6b81d0281348a0f241a80ddd427745a6a678)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create config fragment if the user makes modifications to kernel config.
User may change .config e.g. by directly editing it or by running the
'do_menuconfig' bitbake task. Devtool generates one monolithic fragment
by simply doing a diff between .config and .config.baseline files in the
source directory. If either of these files is missing, the config
fragment is not gerenrated or updated. The output is a file,
'devtool-fragment.cfg' that gets added to SRC_URI in the recipe (as well
as copied into the 'oe-local-files' directory if that is present in the
source tree).
${S}/.config will be a symlink to ${B}/.config. We need to do this as
devtool is not able to access ${B} because ${B} is set in a .bbappend in
the workspace layer which is not parsed by devtool itself.
[YOCTO #8999]
(From OE-Core rev: 524da136e5b837a60682516ac08f3092c635e934)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Copy kernel config is copied to the source directory at a later phase in
_extract_source() so that it gets copied when devtool sync is done, too.
(From OE-Core rev: ff895be7a46c4b3b1b791e5387490d90bb34fce2)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"poky" is the reference distribution for the Yocto Project. This renames
the layer within the meta-yocto repository to meta-poky, better matching
what that layer contains.
A layer.conf file is left behind as this is the only way which allows
existing builds to migrate safely to the new name. It will be removed
at some future point.
This change requires the corresponding OE-Core change to handle the
migration and the changes to the infrastructure to support this.
(From meta-yocto rev: d0c88df2e14672fca4ebbde93c5efbcd0e4fa9b6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Package names are actually case sensitive near as I can tell, so we
shouldn't be lowercasing them everywhere.
* Look for CMake packages in pkgdata and map those back to recipes,
so we aren't dependent on the hardcoded mappings (though those are
still preserved).
* Avoid duplicates in the unmapped package list
(From OE-Core rev: 2ddad52ccca07245eea43d9b844c6c7d4b667ca3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a means of extending the dependency extraction for autotools and
cmake.
Note: in order to have this work, you need to have an __init__.py in the
lib/recipetool directory within your layer along with the module
implementing the handlers, and the __init__.py needs to contain:
# Enable other layers to have modules in the same named directory
from pkgutil import extend_path
__path__ = extend_path(__path__, __name__)
(From OE-Core rev: 915dea9f89cd737e5ba167c384e8d314c5c23c49)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I should have adjusted this in OE-Core commit
80a44e52609a89d9ffe816181ae193af491c06ac where the behaviour changed.
(From OE-Core rev: 13409a2b899bb74b8060c840b8c7ef8759d099cb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If files would be overwritten by the deployment, preserve them in a
separate location on the target so that they can be restored if you
later run devtool undeploy-target.
At the same time, also check for sufficient space before starting the
operation so that we avoid potentially failing part way through.
Fixes [YOCTO #8978].
(From OE-Core rev: a2da55712691bcf1066c53d813107d75213d6b10)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you want to put the target device back to exactly how it was before
devtool deploy-target started poking things into it, then it would make
things easier if you didn't have to figure out which recipes were
deployed. Now that we have the list stored on the target we can
determine this reliably, so add a -a/--all option to undeploy-target to
undeploy everything that has been deployed.
One of the side-effects of this is that the dry-run functionality for
undeploy-target had to be reimplemented to actually run the script on
the target, since we have no way of knowing what's been deployed from
the host side. We don't need to do the same for deploy-target though
since we know exactly which files will be deployed without referring to
the target.
(From OE-Core rev: 41fed83060f0041e14e455d1446397bda277d953)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When running devtool deploy-target, we save a list of deployed files,
and this list is used by devtool undeploy-target (or the next time
deploy-target is run if the list is present, in case any files have been
renamed or deleted since the first time). We were writing this file to
the host, but it makes more sense to write the list to the target
instead, so that if we for example swap in a different board, or switch
hosts, things will work as expected.
In order to do this properly we have to construct a shell script and
ship it over to the target so we can run it. The manifest is written out
to a hidden directory in the root (/.devtool).
Fixes [YOCTO #7908].
(From OE-Core rev: a16a0c9334b785e2df896266c8911a2c7a1806b8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Get the default value for updateserver from the configuration file and
show it in the help; also only make the parameter optional if it's
specified. This means we can also drop the check in the function as
argparse will then ensure it's specified if there's no config setting.
(From OE-Core rev: 82497bde58fc8bdae8d8acfbf025a1a90b14cc3e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a long description used when running --help on the specific command.
(From OE-Core rev: eb7787d1652fd84a149fd394969f4f1099406051)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Naming these as "optional arguments" is perhaps slightly confusing since
some of the positional arguments might also be optional; in addition
it's rare (though possible) for options to be mandatory - up until
recently we had a recipetool option (-o) that was mandatory. It's not
perfect, but change it to "options" so it's at least a bit more
appropriate.
(From OE-Core rev: 55e675de6191bf7eccd26df29189f2a6faa40a20)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The listing of subcommands in the --help output for devtool was starting
to get difficult to follow, with commands appearing in no particular
order (due to some being in separate modules and the order of those
modules being parsed). Logically grouping the subcommands as well as
being able to exercise some control over the order of the subcommands
and groups would help, if we do so without losing the dynamic nature of
the list (i.e. that it comes from the plugins). Argparse provides no
built-in way to handle this and really, really makes it a pain to add,
but with some subclassing and hacking it's now possible, and can be
extended by any plugin as desired.
To put a subcommand into a group, all you need to do is specify a group=
parameter in the call to subparsers.add_parser(). you can also specify
an order= parameter to make the subcommand sort higher or lower in the
list (higher order numbers appear first, so use negative numbers to
force items to the end if that's what you want). To add a new group, use
subparsers.add_subparser_group(), supplying the name, description and
optionally an order number for the group itself (again, higher numbers
appear first).
(From OE-Core rev: e1b9d31e6ea3c254ecfe940fe795af44761e0e69)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we didn't make any changes to the file then there's no point warning
the user that we have done.
(From OE-Core rev: 391b9ba30d802ac420ddf382588e03e718861c01)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If files had been created next to the recipe (for example devtool add,
edit the source and commit and then devtool update-recipe), running
devtool reset failed to preserve those files and gave an error due
to trying to rmdir the directory containing them which wasn't empty.
Fix the preservation of files in the "attic" directory properly so
we catch anything under the directory for the recipe, and replicate
the same structure in the attic directory rather than slightly
flattening it as we were before.
(From OE-Core rev: bbe63eb97ae7f78959f117d6066ef821c4da1c77)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Looking at Chris Larson's code for starting the user's editor for
"recipetool newappend" it was slightly better than what I wrote for
"devtool edit-recipe" in that it checks VISUAL as well as EDITOR and
defaults to vi if neither are set, so break this out to its own function
and call it from both places. The broken out version passes shell=True
however in case it's a more complicated command rather than just a name
of an executable.
(From OE-Core rev: 184a256931e8cdc7bea97a905c4e67a435964de0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no -N/--name option for devtool, that's a recipetool option -
with devtool you just specify the name as a positional argument.
(From OE-Core rev: d2bc0cba5ca8a7220ffe1ef96acf856fe972ce7c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Processing of this option was lost during recent change of
wks parsting. It was discovered during the work on booting
wic images under qemu. Now, when -use-uuid is fixed it's
possible to specify root partition by partition uuid.
This will be done in the following commit.
(From OE-Core rev: b4882e0b84d7fd4c85ee95386e94722485eafc2b)
(From OE-Core rev: 73e9e3f150bf2de9b27c2ccc73e3dee334ee73fe)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you specify a local directory which happens to be a git repository
with an origin remote (and it is in fact remote), we can use that for
SRC_URI as implemented by OE-Core revision
b143d414846854dc8b3e0a47358daf5646eded38, however we also need to set S
if the recipe is going to be of any use fetching from that SRC_URI
later.
(From OE-Core rev: 8bbbd2d63f1bc752f9a30054a089dc2caf5fd84c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When recipetool create is given a URL that starts with http(s):// and
contains /git/, such as the URLs at git.yoctoproject.org, it's fairly safe
to assume it's a git repository and not something that should be fetched
with wget, so rewrite the URL.
(From OE-Core rev: 3ca04757a670e8b6f78799cc0454d75691809ac4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When auto-detecting the name for a recipe from the URL, strip off any
parameters (";name=value...") before parsing the URL, otherwise this
just ends up in the recipe name which is undesirable.
(From OE-Core rev: d3c46b5d0abd56bcadd4f2f1ef985f13d67f605b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix a regression introduced in in OE-Core revision
aedfc5a5db1c4b2b80a36147c9a13b31764d91dd where specifying a local source
tree without specifying a name resulted in a traceback.
Fixes [YOCTO #9086].
(From OE-Core rev: 67ea9d21f20a371a0ee443b46326018cb1527b62)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's going to be more common for users not to have the prepared source
tree for a recipe already, so the default behaviour ought to be to
extract it for them from the recipe. Change the default to extract
(effectively making the -x option a no-op) and add a --no-extract/-n
option to disable it. Later we can look at trying to be smart and
reusing an existing source tree instead of erroring out if it exists;
for now this is just the default reversal.
(From OE-Core rev: 80a44e52609a89d9ffe816181ae193af491c06ac)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Both BitBucket and GitHub provide "release" downloads that unfortunately
don't include the actual project name. For recipetool this means we have
to have special handling for these URLs or else the current code assumes
the name of the project is something like "v0.9.1". Borrow and adapt
some code from autospec to do this, and put it in its own function for
clarity.
(From OE-Core rev: e8435fde7f82c39cc0efe1d4bf043b29f63898e9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
CMake supports a find_library() directive to find named libraries, so
detect dependencies from this.
(From OE-Core rev: d0265bc67f797ee4b7760cf37335994133809abf)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When extracting source for a recipe, if there are additional custom
tasks run that make changes to the source, create a commit in the
generated git branch so they are contained. This is particularly
useful for tasks that come before do_patch since otherwise the changes
might get incorporated in the first applied patch, but otherwise it
helps avoid the tree being dirty at any point.
Fixes [YOCTO #7626].
(From OE-Core rev: 997a77d9b20af1778b804778e5d8c8a7424f7582)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make path to newly generated README file legitimate
(From meta-yocto rev: 32286bb798c2778457b5578b4b590629c96a0ee2)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Take `pwd` to be <initial-dir>. The %s path is relative to it. The value
of %s is "output_folder/build". The current code works as follows:
Changing directory to %s and finding the sources (after cd'ing) to cpio
with output redirection to %s/initrd.cpio triggers the following error
"Error: exec_cmd: cd output_folder/build/INITRD && find . | cpio -o -H
newc >output_folder/build/initrd.cpio returned '1' instead of 0"
This happens because after the cd, `pwd` is <initial-dir>/%s and by the
redirect we write the result to to <initial-dir>/%s/%s/initrd.cpio which
obviously does not exist.
Fix this by getting the sources with "find %s" instead of "cd && find ."
(From OE-Core rev: 07fa4783566d22d46ce719a621eee5404932dbbe)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
.iso image creation fails if during the image creation syslinux
is baked and syslinux-native is not.
Added new check to verify if both syslinux and syslinux-native
are baked and bake them if these are not installed.
(From OE-Core rev: fd5749832960ad3b85697c2878490d6f008982a3)
Signed-off-by: Mihaly Varga <mihaly.varga@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A kickstart file for non-x86 boards may have no 'bootloader' stanza. It
is the usual case if bootloader is setup using other mechanism than
through wic, and is for instance a part of u-boot configuration. In such
case the 'bootloader' field in the KickStart class will be
uninitialized. Instead of adding an empty bootloader line in every
kickstart file call the bootloader parser with empty argument list to
get defaults namespace.
(From OE-Core rev: 264c03e854f77c3b62acb710384f66716ccbf469)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When you need to set EXTRA_OECONF for a recipe, you need to know what
options the configure script actually supports; the configure script
however is only accessible from within a devshell and (at least in the
case of autotooled software fetched from an SCM repository) may not
actually exist until do_configure has run. Thus, provide a "devtool
configure-help" subcommand that runs the configure script for a recipe
with --help and shows you the output through a pager (e.g. less),
prefaced by a header describing the current options being specified.
There is basic support for autotools, cmake and bare configure scripts.
The cmake support is a little hacky since cmake doesn't really have a
concise help option that lists user-defined knobs (without actually
running through the configure process), however that being a design
feature of cmake there's not much I can think of to do about that at
the moment.
(From OE-Core rev: 0e5d84d9705091b338000ef02720cfa090f76888)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we run the tasks required to extract the source for a recipe (e.g.
within "devtool modify" or "devtool extract") if one of those tasks
fails you get a bb.build.FuncFailed exception; handle this properly so
you don't see a traceback.
(From OE-Core rev: 95d8631b3bdf216001e57f48277535c65a4cc49e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a recipe generated by "devtool add" has been modified since then when
you run "devtool reset", it will be moved into the "attic" subdirectory
of the workspace in case those modifications need to be preserved. It
seems natural that if those modifications were worth preserving we
should warn the user if such a file exists when they run "devtool add"
to create the same recipe again, so they can pick up where they left off
if they want to.
(From OE-Core rev: 0a39b907ff997c3a62c92ab22325c726b612de5b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provide an option to devtool build-image to specify the list of packages
instead of taking the list of packages produced by recipes in the
workspace. Sometimes you don't want all of these packages; other times
you want to add more.
This is the most immediate fix for [YOCTO #8855], though it is a little
crude so I would like to provide better means of customising the image
contents later.
(From OE-Core rev: b3a44951a74fe58714b72e71a7a558b67a71e1e3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
standard.py is getting a bit large; move the "utility" commands to
another module.
(From OE-Core rev: 5089b93f5b341dc28c343f7afe15efda2081ed36)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I was a little bit hasty in OE-Core revision
c2cc5abe34169eae92067d97ce1e747e7c1413f5 - it turns out BitBake's
fetcher code is not consistent in whether it logs something useful or
not; when fetching from an http URL it does but with a git repository
it doesn't. In advance of any major reworking of fetch error handling in
BitBake, let's just print the text of the exception and then we know we
have shown something to the user.
Additionally, we were only catching FetchException here but there are
several other classes of exception that the fetcher can raise (e.g.
MalformedUrl); catch the parent BBFetchException class instead so we
avoid tracebacks for those other classes as well.
(From OE-Core rev: 578d3873a6415c9203c185c21cff472f7d2dab02)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the URL ends in a / then we want to strip that off the path we split
out of the URL before calling os.path.basename() on it.
(From OE-Core rev: 308189beda8a31541481d09e3d5e86187e843d8d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you specify a local directory which happens to be a git repository
with an origin remote (and it is in fact remote), we can use that for
SRC_URI rather than leaving it blank in the recipe.
(From OE-Core rev: b143d414846854dc8b3e0a47358daf5646eded38)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes you don't want to build an entire project, just a subdirectory
of it; add a --src-subdir option to make that easier. (We still look for
a single subdirectory in what gets unpacked, e.g. what you might find
within a tarball, so whatever you specify with this option is added onto
the end of that.)
(From OE-Core rev: 59682d78f95732e014f78f13e0a05f843860d9bb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Quoting is optional in CMakeLists.txt and is occasionally used, so strip
out quotes if they are present.
(From OE-Core rev: 4ffe2e1ec9df05b92a2ad5746fb0ca6d218fd77e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the ability to install additional pre-built items (from shared
state) into the extensible SDK. This can already be done implicitly by
adding something to DEPENDS within a recipe you're working on and then
running "devtool build", but it's useful to be able to explicitly
install things particularly if you're using the extensible SDK as a
traditional toolchain.
Note that for this command to be useful you need to have SSTATE_MIRRORS
set in your SDK configuration, and that mirror needs to be populated
with sstate artifacts for recipes you wish to be able to install.
(From OE-Core rev: 3474a42954908d1688fd3a6cb600eed315b27833)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make the following improvements to the SDK update process:
* Use a manifest file with sha256sums to track files other than sstate
and metadata that we need to update - e.g. conf files. This allows us
to handle where files such as auto.conf may or may not be present,
as well as the configuration changing without affecting task signatures
- we still want the config files copied in that case rather than it
saying nothing needs to be done.
* Write the SSTATE_MIRRORS_append to site.conf rather than local.conf
so that local.conf remains static (since we don't want to trigger an
update every time). Also, If there is an SSTATE_MIRRORS value already
set in the configuration we can skip this and assume it contains the
needed packages.
* Allow the update process to be run in any directory, don't assume
we're already at the base of the SDK
* Where practical, fetch remote files into a temporary location and
then move them to the desired location at the end, to avoid a
failed update leaving the SDK in a broken state.
* Update all installed do_populate_sysroot / do_packagedata tasks
instead of using the SDK targets. This ensures any item installed
through dependencies after installation (e.g. when running
"devtool build") won't go stale.
(From OE-Core rev: 3d35631121f0e030bc8151f5c23d84008d06f44b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Use tempfile.mkdtemp() instead of hardcoding temp dir
* Set a variable early for the temp locked sigs file and use that
everywhere
* Delete the temp dir at the end
(From OE-Core rev: bad5d1a8c047a8118d30d9fa708b021d1599e0dc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When you run devtool build, you need to have the pkgdata written out at
the end, so that if what you're adding is a library and the next thing
you add is something that depends on that library, the necessary
information to map the dependency back to the recipe is present. In
practical terms all this means is we need do_packagedata to run in
addition to do_populate_sysroot.
This does mean that do_package needs to run which wasn't running before,
and that means that the few package QA tests that run within do_package
such as installed-vs-shipped will now be run. This may be a bit
bothersome, and prompted a fix for one of our oe-selftest tests as a
result, but I don't see an easy way around it. Ultimately if you care
about using the recipe in an image you'll need to fix any such errors
anyway.
Fixes [YOCTO #8887].
(From OE-Core rev: 6579c7120ee5a541427ff5b6b07f838d52f9fe7c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a variable SDK_INCLUDE_PKGDATA which you can set to "1" to include
pkgdata for all recipes in the world target. There are a couple of uses
for this:
1) If you use "devtool add" to add a recipe that builds something which
depends on anything in world, the dependency can then be correctly
mapped to the recipe providing it and that recipe can be added to
DEPENDS, since we have the pkg-config and shared library dependency
data within pkgdata.
2) You'll be able to search for these recipes and any files they
package for the target with "devtool search" since that also uses
pkgdata
This of course assumes you've tailored world through EXCLUDE_FROM_WORLD
to only include recipes you'd want built in your distro, but I think
that's a reasonable assumption; failing that there is a
WORLD_PKGDATA_EXCLUDE variable that you can set to exclude any recipes
you don't want.
Note that this patch relies on functionality implemented in a recent
BitBake patch and will not work without it.
Implements [YOCTO #8600].
(From OE-Core rev: 67149ea097d6fab7496b43e85a40853f40bd527e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added missing docstrings, fixed wrong indentation and long lines.
Final pylint score is 9.89/10
(From OE-Core rev: 6e5dd42727b40c6b5ba6235026a6cfc78f482ac9)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added description of 'include' parser command to the
'wic help kickstart' output.
(From OE-Core rev: 7481f39382e63ecbb5de406559cc28e5689bd974)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to give and example of 'include' feature of ks parser
and for testing purposes common parts of 3 canned wks files were
moved into common.wks.inc
(From OE-Core rev: 629c6381669bd4acdb1613229cd095881d2d9cd2)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used custom argument type to implement search of include
.wks files in canned wks paths. Include files can be
specified either by full path or by name.
[YOCTO #8848]
(From OE-Core rev: 3695962ba4b685f304f1039978cec60d1b1712e3)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This function is going to be used by ks parser to find include .wks
files. get_boot_config name is a bit confusing as function is quite
generic. It looks if file is present in the canned wks directories.
Renamed get_boot_config -> get_canned.
Renamed parameter file_boot -> file_name.
Updated description.
(From OE-Core rev: 8ea9a4c0422c9600cd33ec6e815ebcf2d0aad364)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Extended parser to support inclusion of .ks files:
recursively called self._parse to parse included .ks
(From OE-Core rev: 33dd323ec6a1a1ed4e1a04e51de182c89c7b6bd9)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Interesting bug was found during implementation of 'include'
parser command.
Build directory was removed in do_configure_partition method of
bootimg- source plugins. This can cause removal of previously
prepared partition images if /boot partition is mentioned after
other partitions in .ks file.
Moved work directory removal to direct.py before processing
partitions.
(From OE-Core rev: ba98262573cf1600e0d477317f51d488b5f8c4bd)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a preparation for 'include' support.
Used unique counter instead of line number for partitions
in .ks file. Line numbers can be equal for different .ks files,
which can cause problems if one .ks file is included into
another.
(From OE-Core rev: cc2233b51f1d22d4e540f4a3e9ceedd7ede9ffa9)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a preparation for implementation of include statement.
Parser will be called recursively to parse included .wks files,
so it should be available as a method.
(From OE-Core rev: 7778b9851758f4f782cb5f5d5fb36e68aed3b275)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I found these when I was looking at libftdi and they seem to be
generic enough to show up in at least a couple of other packages so I
figure I'll add them.
(From OE-Core rev: 9fa3ff44e05930d4dfa153db777077e747ecbf45)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support for extracting dependencies from CMakeLists.txt. There's
still a bunch of things missing that are outside the scope of OE-Core
and we still lack a proper extension mechanism, but this is a good
start.
This also adds an oe-selftest test to exercise the new code a bit.
Implements [YOCTO #7635].
(From OE-Core rev: 77e73e6930381fdbd6e78d3913d6467572e16568)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We want to specify dependencies on virtual/* rather than whatever
library is selected in the current configuration.
(From OE-Core rev: e1ac0c45b27ded9962edaf34597f827d0b41ba82)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some refactoring to allow access to the library/header/pkg-config
mappings and the DEPENDS / unmapped dependency output code from other
classes than AutotoolsRecipeHandler.
(From OE-Core rev: 40c10d998b90dd59c6d36c28f8ba11ec598bfa0f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The regex for detecting git URLs was unanchored, leading to it matching
where it shouldn't have. An example of where this went wrong was
http://taglib.github.io/releases/taglib-1.9.1.tar.gz.
(From OE-Core rev: bacff751c88b680fbfb07843b18c59c8bc80a9ea)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Support a number of macros from autoconf-archive when reading
configure.ac to extract dependencies.
(From OE-Core rev: ee977a62c58ded361c2abd78654bd25637fe9ea1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are a few different macros that can be used to pick up these
tools, add support for them all.
(From OE-Core rev: 7dfff4b7f05653aea230294ff1a7c023730deff9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The presence of BOOST_REQUIRE or AX_BOOST.* indicates that boost is a
dependency.
(From OE-Core rev: 02570b1fc31c7f4e9643aea8365806089622c0e7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* The regexes for PKG_CHECK_MODULES / AC_CHECK_LIB were a bit too strict
and thus we were skipping some macros.
* Add support for PKG_CHECK_EXISTS
* Avoid duplicates in warning on missing pkg-config dependencies
* Ignore dependency on musl (since this may come up if it's the selected
C library)
(From OE-Core rev: c58669fb0977f7f0cb79f252484d5c5ef0dfb7e4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
kickstarter.py was not the best name for this module as previously
there was a directory with the same name in scripts/lib/wic/.
All files were removed from it, but .pyc files could still stay there
causing imports from wic.kickstart to fail with
ImportError: cannot import name KickStart.
(From OE-Core rev: b9d400be06bc4a4bb9f9c6a6a0c8e5ecfd4e2dfb)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Overriden error method to throw exception instead of
printing usage error message. Exception is caught by
KickStart code to add .ks file name and line number.
(From OE-Core rev: 373016ba08c2ec4dbcd44649d9c8cd57d5574402)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed imports of wic.kickstart from plugins as they're
not used in the code.
(From OE-Core rev: 33d8784470c506fabcf9627e754628cdea61dd07)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Caught argparse.ArgumentError
Included .ks file name and line number into the error messages.
(From OE-Core rev: 549c76ebda9afba0771d6d2c9b0b83f7a479c626)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Catch parsing errors and output them using msger.
(From OE-Core rev: 9c058f115583592f5cce2a969882fdd0c2ab535f)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This exception will be raised by kickstart parser
on parsing errors and processed in the code which
calls parser to produce meaningful error output.
(From OE-Core rev: 13092793693c1c0ea172701578506f4a70a093d2)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without one of the --ondrive, --ondisk or --use-uuid options for a
partition with a mountpoint specified the automatically generated
fstab entry will be invalid.
[YOCTO #8844]
(From OE-Core rev: a524ced19db05e776834cd1f1db03c68a05f9c0b)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used partitions and configfile bootloader attributes instead of
using getters get_bootloader_file and get_partitions.
(From OE-Core rev: d34dd190e1da00ca8c9b2cb0adba15b9f0de2920)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used size and source_file attributes instead of using
setters. It's more pythonic, clear an consistent.
(From OE-Core rev: 7cf236047fa5d0d947fd214181c9a63ccb2509ac)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Got rid of get_rootfs and set_rootfs java-like getter and
setter. Renamed rootfs to rootfs_dir to be consistent with
the name of kickstart parameter --rootfs-dir.
(From OE-Core rev: 51ec52a62ce49d1a1a83489379990f78cfe849f9)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used bootloader.timeout instead of kickstart.get_timeout getter.
Accessing attributes instead of getting them with getters is
more pythonic, shorter and readable. It also more consistent as
most of partition and bootloader attributes are used this way.
This change also takes care of appendLine bootloader attribute:
it's renamed to bootloader.append attribute provided by new parser.
(From OE-Core rev: 8088caeff5bf4ee9279b47a69c9f1e5537909601)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New data structure is less nested than old one.
Adjusted bootloader and partitions fields:
self.ks.handler.bootloader -> self.ks.bootoader
self.ks.handler.partitions -> self.ks.partitions
(From OE-Core rev: b46da0731e3f7016d0ab2a67967f07c7e199f219)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed pykickstart-related code as it's replaced by
new kickstart parser.
(From OE-Core rev: 30bb1f3b6b832f9be691350581458c5fdaaaad70)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used KickStart parser class instead of pykickstart API.
This commit breaks wic as data structures and field names
provided by new API are a bit different from old ones.
This issue will be addressed in the following commits.
(From OE-Core rev: f72439d321220b724bfe2b4a92fed46c2c19fb3f)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This module will replace existing pykickstart machinery
it contains only option used by wic, it's simple and
clear. And It will allow to remove a lot of old complex
code from 3rdparty/pykickstart/ and kickstart/custom_commands.
(From OE-Core rev: c7b67ccfda8b22c090aa74d96b7c9af5a97a9a98)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Copied partition-related API from kickstart/custom_commands/partition.py
to separate module in preparation for removal of all
pykickstart related code.
(From OE-Core rev: a915c4cbc33ef0a12546ac0000ecf8aedb6241d5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than horrible workarounds, use the new --setscene-only option
of bitbake to pre-populate the SDK structures.
(From OE-Core rev: 38237b7ac53c416f85c4a70a61acafc3404c8b5f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's logical that you would want to build BBCLASSEXTENDed items
separately through devtool build, so simply allow that - we're just
passing the name verbatim to bitbake, so all it means is adjusting the
validation.
(From OE-Core rev: 25dc5ac42c9da53c01416e7fdcc819d729281133)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the recipe file itself was created in the workspace, and it uses
BBCLASSEXTEND (e.g. through devtool add --also-native), then we need to
clean the other variants as well.
(From OE-Core rev: e1bf6a30679a83d4dbcf37276204f639541e95f9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We're doing this in a couple of places, let's just find the recipe file
if it exists within the workspace (which it will if it's been added
through "devtool add") when we read in the workspace.
(From OE-Core rev: 81cf5580993c99050e3f4d6d891bc67534721487)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes you need to build a variant of a recipe for the build
host as well as for the target (i.e. BBCLASSEXTEND = "native"); add a
--also-native command line option to "recipetool create" that enables
this and plumb it through from an identical option for "devtool add".
(We could conceivably do the same for nativesdk, but I felt it might be
confusing within the context of the extensible SDK, where nativesdk
isn't really relevant to the user.)
(From OE-Core rev: f3bea83db173cce921a9a30f04e88b7e3ed98854)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to run the clean for all recipes that are being reset before we
start deleting things from the workspace; if we don't, recipes providing
dependencies may be missing when we come to clean a recipe later (since
we don't and couldn't practically reset them in dependency order). This
also improves performance since we have the startup startup time for the
clean just once rather than for every recipe.
(From OE-Core rev: c10a2de75a99410eb5338dd6da0e0b0e32bae6f5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the recipe name ends with -native then we should inherit native;
likewise if it starts with nativesdk- then inherit nativesdk.
(Note that the recipe name must actually be specified by the user in
order to trigger this - we won't do it based on any name auto-detected
from e.g. the tarball name.)
Since we're doing this based on the name, "devtool add" will also gain
this functionality automatically.
(From OE-Core rev: a216fb1f5953327790dce3d2c1a9af616c0b410d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As a matter of general convention we expect recipe names to be lower
case; in fact some of the packaging backends insist upon it. Since in
this part of the code we're auto-determining the name, we should convert
the name to lowercase if it's not already so that we're following
convention and avoiding any validation issues later on.
(From OE-Core rev: 64986decbc11afa0d1e11251f5f7adcba1860d19)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For debugging purposes it's useful to be able to skip the preparation
step so you can inspect what the state of the build system is first.
(From OE-Core rev: 0bba4b5afd2ce2c3a79445eee886979a77f1a4d8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Running "raise" with no arguments here is invalid, we're not in
exception handling context. Rather than also adding code to catch the
exception I just moved the check out to the parent function from which
we can just exit.
(From OE-Core rev: 0164dc66467739b357ab22bf9b8c0845f3eff4a4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Clone the correct path - we need .git on the end
* Pull from the specified path instead of expecting a remote to be set
* up in the repo already (it isn't by default)
(From OE-Core rev: 1a60ee8bd21e156022c928f12bb296ab5caaa766)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We read the updateserver setting from the config file but we never
actually used that value - the code then went on to use only the value
supplied on the command line.
Fix courtesy of Dmitry Rozhkov <dmitry.rozhkov@intel.com>
(From OE-Core rev: 1c85237803038fba539d5b03bf4de39d99380684)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 3.14 and 3.19 kernel have been removed from oe-core, so we drop
our bbappends.
(From meta-yocto rev: e82a9e75b2d02387fc58232ee469ed0ae661b996)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a file is given using --sourceparams then wic directly use that file
instead of copying them to build folder. At time of assembling it os.rename
is called which renames all the files to name. In that process the original
file is renamed. When image recipe is rebuilt then wic complains about
missing file which was renamed in previous build.
[YOCTO #8854]
(From OE-Core rev: 33c52b1f2d39feb641465bf42e8b16d0ab22a316)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Copied layers with 'cp -a' instead of calling shutil.copytree as
copytree fails to copy broken symlinks.
More pythonic fix would be to use copytree with 'ignore' parameter,
but this could slow down copying complex directory structures.
[YOCTO #8825]
(From OE-Core rev: e5b841420b9fdd33829f7665a62cd06a3017f7e6)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having fetched the source and unpacked it to a temporary directory, we
then move part of it to the destination directory, or if the source is at
the top level we move the whole temporary directory, but in the latter
case we were later attempting to delete the temporary directory which no
longer existed. Clear out the variable so that doesn't happen.
(From OE-Core rev: 91714a52e91cddba5a16c73cf5765d1f47f7856c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* tar and binutils we can assume are there
* libsocket is only relevant on BSD systems, so we can ignore it.
* Detect more things implying gettext/intltool is needed
* Detect glib-2.0 requirement.
(From OE-Core rev: 2c4c78a6a9970533f3352f1067b2263f45098493)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Much of this was copy/pasted from the extract subcommand code; make it
specific to sync.
(From OE-Core rev: 08ca966dd48db881d8bfb7d7fa0aba49f1f7cffe)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We deliberately leave the source tree alone when resetting in case it
contains any work in progress belonging to the user; tell them that
we're doing this so they aren't surprised about it still existing later
on.
(From OE-Core rev: 1c616802ba2cfb37f8403f1dc6cf91ce3bd99ac2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a recipe in the workspace actually exists as a file within the
workspace (e.g. after doing "devtool add" or "devtool upgrade") then
show the path to the recipe file on the status line for the recipe.
(From OE-Core rev: 29833828a90c8433af3b231b50e99cd97edf19ff)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As per the changes to "devtool add", make the source tree path optional
and use the default path if none is specified.
(From OE-Core rev: 83707d1334fb094fd1877bcfd07a83866601048a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having to specify -f is a little bit ugly when a URI is distinctive
enough to recognise amongst the other positional parameters, so take it
as an optional positional parameter. -f/--fetch is still supported, but
deprecated.
(From OE-Core rev: aedfc5a5db1c4b2b80a36147c9a13b31764d91dd)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
recipetool create now has all the logic in it for auto-detecting the
name and version, and using those in the file name - so we can make the
name an optional parameter for devtool add and we pick up the file name
that recipetool has used after the fact.
(From OE-Core rev: 70ab08146e930f1fc55fdf5726a87303e20bd60f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Assuming we're fetching source remotely (from a URI) we can default the
source tree that will be extracted from it to a "sources" directory
under the workspace in order to save the user specifying it if they
don't have a preferred location.
(From OE-Core rev: ffdad964c7271972e4b067e4898bf7c338c25b68)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Python's argparse module can't handle when several optional positional
arguments (set with nargs='?') are intermixed with other options. If the
positional arguments aren't optional then this isn't an issue; thus when
changing positional arguments to optional (as we are doing with devtool)
we need this workaround.
This is a pretty horrible hack, but we don't want this flexibility of
ordering to disappear simply because we made some arguments optional.
Unfortunately the corresponding bug remains unresolved upstream even in
Python 3, and argparse is not really designed to be subclassed so it
doesn't make things like this easy.
(From OE-Core rev: 98fd5de373e16fe5d69a3065f844efc8037385bc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bbappend already exists at this point, so we know what its path is -
there's no need to figure it out from scratch here.
(From OE-Core rev: c0754d672966901f22dff1bcd40bbd08d1219c7a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We're repeating this in a couple of places, so we might as well have a
function to do it.
(From OE-Core rev: 67a28109a1ee1383d1b17a8dafa4fe510948238b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a few clarifying words.
(From OE-Core rev: 2103fa9dc7faf2189c8b426b87fb9d421a9983ac)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add an "edit-recipe" subcommand that runs your default editor (as
specified by the EDITOR environment variable) on the specified recipe in
the workspace. Note that by default the recipe file itself must be in
the workspace - i.e. as a result of "devtool add" or "devtool upgrade";
however there is a -a/--any-recipe option to override this.
(From OE-Core rev: dbfe8fa2e86c2bb50bef47c389017cdf93543321)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Often the filename (e.g. source tarball) contains the name and version
of the software it contains.
(This isn't intended to be exhaustive, just to catch the common case.)
(From OE-Core rev: 944eacfb849ee69b41e12c9de4f264406281ac6a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some build systems (notably autotools) support declaring the name and
version of the program being built; since we need those for the recipe
we can attempt to extract them. It's a little fuzzy as they are often
omitted or may not be appropriately formatted for our purposes, but it
does work on a reasonable number of software packages to be useful.
(From OE-Core rev: 3b3fd33190d89c09e62126eea0e45aa84fe5442e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes we want to force one handler to run before another; if the two
handlers are in different plugins that's difficult without some kind of
priority number, so add one and sort by it.
(From OE-Core rev: 0219d4fb9cefcee635387b46fc1d215f82753d92)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the user specifies a URL that just returns a web page, then it's
probably incorrect (or broken); attempt to detect this and show an error
if it's the case.
(From OE-Core rev: 83b1245b2638eb5d314fe663d33cd52a776a34a7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you specify a URL ending in /, BitBake's fetcher returns a localpath
of ${DL_DIR}, and if you then try to unpack that it will attempt to copy
the entire DL_DIR contents to the destination - which at least on my
system filled my entire /tmp. Obviously we should fix the fetcher, but
at least detect and stop that from happening here for now.
(From OE-Core rev: 7e63a672517518644a37ce006e05b5494c29cf6e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If SRC_URI happened not to be in the pre-generated lines then this code
would error out. This is unlikely to happen with the way the create code
is structured at the moment, but handle it just in case.
(From OE-Core rev: 95d33e90f2d5d9dd5ccc950856b8a939fefb831e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In my testing here it appears make -qn returns an error (exit code 2)
whereas make -n doesn't; I can't immediately tell why based on the
documentation. We don't actually care for it to be quiet since we're
capturing the output, so let's just leave -q off and have this work
properly as a result.
(From OE-Core rev: 30c4cd9efdac400d713dff645f23f2627277d75a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a fetch error occurs, the fetcher already prints a reasonable error -
we don't need the traceback as well, so catch that and exit if it
occurs.
(From OE-Core rev: c2cc5abe34169eae92067d97ce1e747e7c1413f5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When you grab a URL for a github repository you'll almost certainly find
it in https://github.com/path/to/repository.git format; but bitbake's
fetcher can't handle that because it'll see https:// at the start and
assume it should use wget to fetch it. If the URL starts with http:// or
https:// and the path part ends with .git then assume it's a git
repository and adjust it accordingly.
(From OE-Core rev: bdbc4cf41d30eddb8a9ed882dedcc1670ce8fdd6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For scripts that use Python's standard argparse module to parse
command-line arguments, create a subclass which will show the usage
the usage information when a command-line parsing error occurs. The most
common case would be when the script is run with no arguments; at least
then the user immediately gets to see what arguments they might need to
pass instead of just an error message.
(From OE-Core rev: d62fe7c9bc2df6a4464440a3cae0539074bf99aa)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the SDK update server hasn't been set in the config (when building
the extensible SDK this would be set via SDK_UPDATE_URL) and it wasn't
specified on the command line then we were failing with a traceback
because we didn't pass the default value properly - None is interpreted
as no default, meaning raise an exception if no such option exists.
Additionally we don't need the try...except anymore either because with
a proper default value, NoSectionError is caught as well.
(From OE-Core rev: 9763c1b83362f8445ed6dff2804dd7d282861f79)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If no mountpoint is specified for a partition command the partition
will be created but not mounted — mention this in the kickstart
help text.
[YOCTO #8820]
(From OE-Core rev: d1ff1fef987457eb1a5ffe42dbabc7808fa7d598)
Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add 'do_kernel_configme' and 'do_kernel_configcheck' to
SRCTREECOVEREDTASKS of kernel packages. These tasks should not be run
because kernel meta in the srctree is not necessarily up-to-date or
even present which causes build failures and/or invalid kernel config.
Especially so because 'do_patch' which is a dependency of
'do_kernel_configme' is not being run.
We now store .config in the srctree and 'do_configure' task is able to
run successfully.
(From OE-Core rev: 7ce4c18a4ba1ebcb9f46e652a881ace1f21d2292)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes the correct kernel config to be used when building kernel
from srctree (extrernalsrc). If no kernel config is present in the
builddir 'do_configure' task copies .config from the srctree.
(From OE-Core rev: 3b516332e038a587685f6e0c14a7f04990bdd6cc)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add new wks file as a example for a custom bootloader configuration.
This change also includes the configuration that file that will be
used.
This example is using syslinux with MBR, the configuration file is
almost the same as the one generated by wic. As stated before this
is just an example.
[YOCTO #8728]
(From OE-Core rev: 4a9db893f721c0da5d103d28b97a0302cc9e2197)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This just adds the "configfile" option for the bootloader
to wic help.
[YOCTO #8728]
(From OE-Core rev: 597045657a1a635f667404306160f9ab2551e954)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change will allow to use a user defined file as the
configuration for the bootloaders (grub, gummiboot, syslinux).
The config file is defined in the wks file with the "configfile"
option in the bootloader line.
[YOCTO #8728]
(From OE-Core rev: d56546b0f312fd042b1a7df3bef97ac1c9b6a5b4)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change add two new function to search for files in the
canned-wks folder for all the layers included in bblayers.conf.
This will be used to search for custom configuration files for
the bootloaders.
There are similar functions in the wic engine, but these are
focused in wks files only, so it was needed to create new ones.
[YOCTO #8728]
(From OE-Core rev: 356a942e75ac1743290d2c360d1bb89e2225b6cc)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently wic does the bootloader configuration file on the fly.
This change introduce a configfile variable for the bootloader;
this is to have a user defined configuration file for the
bootloaders (grub, syslinux, and gummiboot). This is particular
useful when having a multiboot system or scripts embedded in the
configuration file.
[YOCTO #8728]
(From OE-Core rev: 8347aee95ea271921c15ea8e580f0ff62325aa26)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This should have been register_commands rather than register_command;
I used register_commands in devtool so lets change this here to be
consistent with that. (Since this is extensible through layers though we
need to remain compatible with the old name, so fall back to that if the
new function name isn't there.)
(From OE-Core rev: 1047f6592ac81643cd847f104da766dc4a4c81ea)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a recipetool subcommand "setvar" to set a variable in a file. This
uses our existing logic such that it doesn't matter if the variable is
already set in the recipe, if it's set in the recipe or some inc file,
and if the variable is not currently set that the line setting the
variable gets inserted in the right place in the file.
Implements [YOCTO #7676].
(From OE-Core rev: 7c33ef77fa165182d24f0a9ae769e9e630e6bd47)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use bb.utils.edit_metadata() to replace some of the logic in this
function; this avoids us effectively having two implementations of the
same thing. In the process fix the following issues:
* Insert values before any leading comments for the next variable
instead of after them
* Insert overridden variables (e.g. RDEPENDS_${PN}) in the correct place
* Properly handle replacing varflag settings (e.g. SRC_URI[md5sum])
(From OE-Core rev: 0f81b83fc5fd908efa7f6b837137830ca65f6ed6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Make some minor clarifications to help text
* Drop ArgumentDefaultsHelpFormatter and just put the defaults in the
text itself where needed (because otherwise you get defaults shown for
store_true options which is somewhat confusing).
(From OE-Core rev: a90ffea30c4578fd6acda2c5945b816ad33b13f5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enable access to the configuration object in register_commands() so that
we can read configuration values there; this allows us to show the
task that will be run in the command line help for the build subcommand.
(From OE-Core rev: 142d006de3235a034839ef7bbe147c56fc7af04a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use a bbappend file to set PARALLEL_MAKE instead of a postfile; this
is a bit neater and only affects the specified recipe.
(From OE-Core rev: b5bafc845892ac39f85f3642b120fb7b785a3d58)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is just belt-and-braces but we ought to use try..finally in this
kind of situation, so just do it.
(From OE-Core rev: a30b407474d4eb6620f1ec549b54187ebbaff008)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Print the SUMMARY value for each matched item assuming it's not the
default.
(From OE-Core rev: 596dee8882ebddb45a6cce9f12aa919107106156)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This function is no longer required to be defined for a plugin, so drop
it where it's a no-op.
(From OE-Core rev: 49716a5e27e704598321bd6c82275b16afc444aa)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than reconstructing the output path for packages, use the proper
variable.
(From OE-Core rev: 06d47777ed1650c479fadf98388f9a3a1f1f9eda)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For subcommands that don't actually involve the workspace, don't
auto-create the workspace.
(From OE-Core rev: 90cba7992bc1d227e242666cd486414bd4a45f7e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you're upgrading a git recipe to a revision on a release branch
that's different to the branch for the current revision, then you'll
need to update the branch parameter in SRC_URI, so add a --srcbranch/-B
command-line parameter to let you do that easily. It handles both when
the branch is stated verbatim in the recipe, and when a reference to
another variable is used (a common convention is to use a SRCBRANCH
variable for this, though the code doesn't care what variable is used
if any).
(From OE-Core rev: e49a66fd898dd44e54c77a838ebef3d983ed2a03)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we're upgrading a recipe that fetches from git, and we've simply
fetched a tarball of the repo instead of directly from the upstream repo
(this can happen if you have PREMIRRORS set up as in poky with a core recipe,
e.g. kernelshark) then we won't have any new revisions, and the checkout
will fail with "fatal: reference is not a tree: <hash>". To avoid this,
do a "git fetch" before checking out the new revision.
(From OE-Core rev: c4daebf3fe797a8063dcbc2ab229be2fbedc8134)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we're upgrading a git recipe the recipe file usually won't need
renaming; for some unknown reason we were throwing an error here which
isn't correct.
(From OE-Core rev: 656348dff9bc9dd1cafc8fff11e5e374e3667f0f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This code was clearly never tested. Fix the following issues:
* Actually set SRCREV if it's been specified
* Enable history tracking and reparse so that we handle if variables are
set in an inc file next to the recipe
* Use a more accurate check for PV being in the recipe which will work
if it's in an inc file next to the recipe
(From OE-Core rev: 8b8f04226ebf464fa61c05ca7af7c6cbda392339)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you did a "devtool add" followed by "devtool upgrade" and then did
a "devtool reset" on the recipe you upgraded, the first recipe would
also be deleted from the workspace - this was because we were
erroneously adding the entire "recipes" subdirectory and its contents to
be tracked for removal on reset. Remove the unnecessary call to
os.path.dirname() that caused this.
(From OE-Core rev: 65354e066f87df7d3138adceb22d6a05d1685904)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The external source of kernel has been patched during the
construction of git repository. Include the do_patch task in the
SRCTREECOVEREDTASKS.
(From OE-Core rev: 0731c5a9e98f7b7f6e5ada9bbb99acb3f5884516)
Signed-off-by: Tzu-Jung Lee <roylee17@currantlabs.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wic runs some tools through pseudo, which makes exec_native_cmd
to fail and throw cryptic error message when tool is not baked:
For example:
Error: exec_cmd: 'export
PSEUDO_PREFIX=/media/ssd/poky-build/tmp/sysroots/x86_64-linux/usr;export
PSEUDO_LOCALSTATEDIR=/media/ssd/poky-build/tmp/work/qemux86-poky-linux/
...
PSEUDO_PASSWD=/media/ssd/poky-build/tmp/work/qemux86-poky-linux/ ...
PSEUDO_NOSYMLINKEXP=1;/media/ssd/poky-build/tmp/sysroots/ ...
mkfs.ext4 -F -i 8192 /var/tmp/wic/build/rootfs_platform.7.ext4 -L
platform -d
/media/ssd/poky-build/tmp/work/qemux86-poky-linux/core-image-minimal/...
returned '1' instead of 0
Made exec_native_cmd aware of pseudo and properly report
errors when command is not found.
(From OE-Core rev: 04bab58809c63c9114feb0aadc9b6115be10fcc4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The sync command is similar to the extract command, except it
fetches the sync'ed and patched branch to an existing git repository.
This enables users to keep track the upstream development while
maintaining their own local git repository at the same time.
(From OE-Core rev: e2fe4c99f1020a20b579832c4feafcd0e9bc2f75)
Signed-off-by: Tzu-Jung Lee <roylee17@currantlabs.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Apparently bb.fetch.URI can't handle this at the moment.
(From OE-Core rev: d3e0a300810251f34932f46daf5263a23846fedd)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default, checkout to latest revision from the machine branch specified by
the user.
(From meta-yocto rev: f79a43406b5b323587415380ecffc87527c64653)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes the hardcode branch name set to KTYPE, where its value is used as a base branch
when user decides to create a new branch. Tested on x86_64 architecture.
[YOCTO #8630]
(From meta-yocto rev: ab895be90a0cae7dfa77a8aab3b19e5571e7e7bc)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By mistake, the file initially had a wrong extension name, so changing to the
correct one.
(From meta-yocto rev: 32c2278b8fe93429d4cfa097eefccd20157cd3b8)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On linux-yocto-dev or linux-yocto_X.YY bbappend files, the SRC_URI includes
{{=machine}}-standard.scc, which in turn includes {{=machine}}-user-parches.scc,
thus there is no need to include it again on the corresponding bbappend file.
[YOCTO #8486]
(From meta-yocto rev: 11c93b5dd8c651df478d4810e1b6ff6ad9fa57e8)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On the 3.19 to 4.1 migration, the target x86_64 was not taken into account
(no reason, just missing the correspoding update on the kernel-list.noinstall
file), so moving it to 4.1 to be align with the rest.
(From meta-yocto rev: 283665d9295c3c10f964496dc0110137e358daa6)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously exec_native_cmd() would remove all items from PATH except for
the native sysroot. This can cause issues for the tools that are created
using create_wrapper().
Now instead of wiping out the PATH, run a sanity check to check if the
command is in the native sysroot.
(From OE-Core rev: ba127370e621b5b683d6f454596c3d0c60c13df7)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For modify / extract / upgrade, if the specified "recipe" is not
actually a recipe but a virtual target such as virtual/kernel, map it
correctly to the actual recipe and make sure we use that name within the
workspace. Thanks to Chris Larson for reminding me this was still broken
and for a hint on how to fix it.
(From OE-Core rev: 1f7752282ffb47d2621030ddb2fa42a5e491d6d2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If recipe parsing fails we need to exit out instead of attempting to use
the data object that's set to None, which resulted in a traceback.
(From OE-Core rev: a46fb1a06be2df00a0bceb4e60ebdecb55b5974c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the directory specified by --extract-to exists, because we were using
shutil.move() to move the temporary extracted directory to the specified
path, a subdirectory was being created under that directory instead of
moving the contents, which was a different result than if the directory
didn't previously exist. We could try to always move the contents but
that's complicated when any symlinks are involved; the simplest thing is
just to remove the directory (which should be empty anyway) before
moving the temporary directory across in its place.
(From OE-Core rev: 2880bd23b471c1966661b9f05726faf60f9c0e7e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use "git cherry" against the original tag that we made when we extracted
the source in order to find the revisions that are definitely new. This
allows you to modify a commit in the middle of the series and then run
devtool update-recipe and not have the subsequent patches unnecessarily
modified.
Fixes [YOCTO #8388].
(From OE-Core rev: 7baf57ad896112cf2258b3e2c2a1f8b756fb39bc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The name of the directory for local source files under srctree is
'oe-local-files', not 'local-files'. Fixes a bug that slipped through
in b7ab82485e4514e07ab8a76e554da27ddc92e6c0.
(From OE-Core rev: 68cbe684fe6d8fe3a44e47ed85837d09077df6d5)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enable variable history tracking so that the variables are updated in
the correct file - i.e. in the file they are already defined.
[YOCTO #7715]
(From OE-Core rev: b54796d013c562972e962126400503085281b425)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make a bit more human-friendly the karch properties when storing
into a file.
(From meta-yocto rev: 39292d397658a8e30c73d4cdaced66cb0efa8380)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add 4.1 kernel support. Old bbapends were not removed, so user still
have the option for 3.14/3.19 kernels.
(From meta-yocto rev: f47ea7224765a3c3da3a9e0a989173b2b1950cfc)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When user wants to output the list of properties for a corresponding architecture
and the output parameter is given (--o/-outfile), there is no need to show the
properties into the console.
(From meta-yocto rev: bd133e2a6e626b4158f5a303d85205de9c66e8f2)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change makes it possible to have local files (non-remote SRC_URI
files, i.e. files that are located in the "recipe space") under the
srctree even if S!=WORKDIR. The files must be placed under the
'local-files' subdirectory.
Complements the previous patch that imports local files into srctree.
[YOCTO #7602]
(From OE-Core rev: b7ab82485e4514e07ab8a76e554da27ddc92e6c0)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* extract: Copy all local source files (i.e. non-compressed/non-arcived
SRC_URI files that have file:// URI prefix) - excluding patches - to
the srctree repository. The files will be placed in a subdirectory
called 'oe-local-files'. The oe-local-files directory is not committed
to the Git repository, but, marked to be ignored by a .gitignore file.
The developer can manually add and commit the files to Git if the
changes to them need to be tracked.
Before this patch, local source files (were copied (and committed) to
the srctree repository only in some special cases (basically when
S=WORKDIR) when doing devtool-extract. For most of the packages local
files were not copied at all.
* update-recipe: This patch causes the local files to be 'synced' from
the srctree (i.e. from the 'oe-local-files' subdirectory) to the
layer. Being 'synced' means that in addition to copying modified
files over the original sources, devtool will also handle removing and
adding local source files and updating the recipe accordingly. We
don't want to create patches against the local source files but rather
update them directly. Thus, 'oe-local-file' directory is ignored in
patch generation when doing update-recipe, even if committed to Git.
This functionality is only enabled if the 'oe-local-files' directory
is present in srctree.
[YOCTO #7602]
(From OE-Core rev: a3bb5bd25b72bd1bcc156dabd0ffa2d9184bb160)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Helper function for replacing a pattern like:
target_dir = os.path.dirname(target)
bb.utils.mkdirhier(target_dir)
shutil.move(source, target)
(From OE-Core rev: c09e5b11225a673534594c3642ceead3eb5653a3)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implement new function that handles patch file generation. The new
function also does the discovery of new, updated and deleted patches.
(From OE-Core rev: 183812e60e1dce09c77b41a5a927ab7fb6fdcf9d)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When adding multiple new patches append them to SRC_URI in correct order
so that they apply correctly.
(From OE-Core rev: 819680092c1b49c16f4ab01d135d44311a9dacca)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We only need the base configuration to get the variable values we want
to get here, there's no need to parse recipes / load the cache.
(From OE-Core rev: 84172ff7b325f081dba6430fd27f12e3745838b5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Do not change change current working directory permanently, but, only
for the duration of tinfoil initialization instead. The previous fix
caused very unintuitive behavior where using relative paths were solved
with respect to the builddir instead of the current working directory.
E.g. calling "devtool extract zlib ./zlib" would always create create
srctree in ${TOPDIR}/zlib, independent of the users cwd.
(From OE-Core rev: 4c7f159b0e17a0475a4a4e9dc4dd012e3d2e6a1f)
(From OE-Core rev: 05060699e63cd25d089e83e9aa56c11d5baa8fd8)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds a subcommand to search to find the target recipe name providing
some file or capability. This is implemented by searching on recipe
name, package name, description, package contents (file names), and
runtime file provides. For example:
$ devtool search libGL
mesa
$ devtool search X11
xextproto
libxxf86vm
xf86driproto
xf86vidmodeproto
libxfixes
xproto
libx11
...
$ devtool search /bin/sed
busybox
sed
This is particularly useful within the extensible SDK but is also made
available in devtool alongside the build system.
Note of course that because this searches pkgdata, useful results depend
upon do_packagedata(_setscene) having executed for the recipe being
searched for.
(From OE-Core rev: 48cbde0ea77ed20126eceba5feb37c42a9229500)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We ship the runqemu script and if we build QEMU itself within the
extensible SDK, then it would be nice to be able to run it. This is a
very thin wrapper around runqemu, supplying the machine and image name
so the user doesn't need to. (This subcommand is only available within
the extensible SDK since it only really makes sense there where it is
otherwise hard to run runqemu directly.)
Implements [YOCTO #6657].
(From OE-Core rev: abca7a0cac7068ffe6a6b873d0842f804388b621)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a means of creating recipes for package files or archives that
contain a directory structure to be installed verbatim, for example an
rpm file. (We mostly just re-use bin_package here and skip some of the
normal build system checks.) This support is available in "recipetool
create" and "devtool add" which wraps the former.
(From OE-Core rev: 9e0a6b2e6f16185f8032d36b77d40802bc388987)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upon further reflection, it seems to me that this bbappend ought to just
be deleted at the end of the build. This keeps things simple; you never
have to remember to delete any files to get back to where you were
before with the image. This means we can also drop the slightly awkward
message reminding the user how to do that. I've also updated the test to
look at the image manifest to determine if the command has worked
instead of looking for the (now deleted) bbappend.
(From OE-Core rev: f6b90bceaedf9bad3d111e6ca1fa79e59f472c73)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Make image optional for the extensible SDK (auto-determine it based on
the targets the SDK was built for)
* Check that specified recipe is in fact an image
(From OE-Core rev: 8884875aacfedc69cc72898684e391e69fea00ba)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the user is running "devtool build-image" within the extensible SDK
then they probably won't know where to find the resulting output files,
so we should tell them explicitly.
(From OE-Core rev: 9baf9fd7a53142a98c7f1cd49c7b001760af51f9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We build recipes and include packages into the image, adjust the
terminology used in code and messages accordingly. Also fix a few typos.
(From OE-Core rev: 866f6e2de20b7022803e53c4de3ff341521b4db5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we end up printing a message about the build directory being the same
as the source, we should print that first and then print the message
about the recipe file possibly needing to be edited to the end so that
it has slightly more impact.
(From OE-Core rev: 97398d14c444fe2408dd6101ef46a0a406924bb5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the fetched source isn't already a git repository, initialise it as
one and then branch and tag, just as we do with "devtool modify". This
makes it easier to make changes, commit them and then use the
"devtool update-recipe" command to turn those commits into patches
on the recipe.
(From OE-Core rev: 2dd865086c37c9eff63c6d0bbfa9f2e909f9fffe)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some recipes don't extract any source (for example, opkg-keyrings). We
were producing a traceback in this case because we weren't checking if
the directory existed.
(From OE-Core rev: 087ca0c644aad19e6e7d3921f99f3056471deb65)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recipes that use work-shared (such as libgcc) are capable of unpacking
the source, but it doesn't necessarily unpack to ${WORKDIR}/${BP}. Use
the last part of the actual S value instead which is more likely to
work.
(From OE-Core rev: 0bab8086fdef93b88d5ec6b88b07ccc921dd786f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you try to use "devtool modify -x" or "devtool extract" on a recipe
where do_unpack has been set as noexec (e.g. glibc-locale), then we get
an error because the expected source wasn't ever unpacked. Do a check up
front for noexec being set on do_unpack and error out with a reasonable
message if that's the case.
(From OE-Core rev: 39a93c85e798e72edd6ab3c05f8adbb1a97e893e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The # character in a URI denotes a fragment; we don't care about this
since it is never supposed to be sent to the server, so remove it from
the URI before actually trying to fetch it or use it in SRC_URI within
the recipe.
(This has come up because download links on pypi.python.org seem to have
a fragment containing the md5sum of the download; without stripping this
off the fetcher will choke on it.)
(From OE-Core rev: 58dc726808817210764eab963a4d453dc4ff49aa)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The shell considers empty functions to be a syntax error, so for
template shell functions that contain only comments (or no lines at all)
then add a : to act as a no-op which avoids the syntax error.
(From OE-Core rev: ff14d9e5b935b99b2efde479515e54c02ba58f6e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we were adding a recipe for software that would typically be built
in the same directory as the source, we were always using a separate
build directory unless the user explicitly specified not to, leading to
errors for software that doesn't expect to be built that way (such as
Python modules using distutils). Split out the code that makes this
determination automatically from the "devtool modify" and "devtool
upgrade" code and re-use that here so the behaviour is consistent.
(From OE-Core rev: 320585b7ff6340df0b0dbc63f95ed3ca8fc3a993)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These functions ostensibly allowed parsing a recipe without bbappends
but this clearly hadn't been tested because a variable was unassigned in
both of them in that case.
(From OE-Core rev: d2bb9f08303bb120e811c03af2f5339e8f262cfa)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes, particularly if you extracted the source to /tmp which is on
tmpfs, the external source tree that is being pointed to may no longer
exist when you come to run "devtool build" or "devtool update-recipe"
etc. Make all of the commands that need to check for a recipe being in
the workspace call a single function and have that function additionally
check the source tree still exists where appropriate.
(From OE-Core rev: 0c3f289576a2ab35b1d1d8854d6763553cc3bf09)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is not actually used for anything - I thought that we would need to
use it within devtool to set global configuration, but we're able to do
everything we need within the bbappends it creates, which also saves on
parse time. If we're not going to use work-config.inc let's just drop it
completely.
(From OE-Core rev: 84a1f82acd3b6ebb3c073aae6b996d2203dad2ce)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was wrongly assumed that part.size is meagured in Mb. In fact it's
in Kb, so there is no need to convert bitbake variable ROOTFS_SIZE as
it's also in Kb.
(From OE-Core rev: 3703ecb4aa5267e6d7330e7978cc7c3bb2250ead)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This sub-command creates a bbappend for the specified target and prints the
path to the bbappend. The -w argument, as with some of the other recipetool
commands, will make a version-independent bbappend.
Example usage: recipetool newappend meta-mylayer virtual/kernel
[YOCTO #7964]
(From OE-Core rev: ac053163c7823e482ca1af2962342e64a54bfb52)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use already existing bb.fetch.decodeurl() for getting the parameters for
a URI. This is more fault tolerant and maintainable.
(From OE-Core rev: cd201664b827e37fcabca272262016b171e997d9)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
So far all devtool and recipetool plugins were expected
to have plugin_init function. This function is empty in
most of plugins as they don't require initialisation.
Making plugin_init optional would allow not having empty
plugin_init in every plugin.
(From OE-Core rev: b99640c89f067866b264f4ee4030fae4c2f338c0)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enables creating packages using devtool within the extensible SDK. (This
is only enabled within the extensible SDK because it provides no
advantage over just running bitbake directly there).
(From OE-Core rev: 6dc0269bca3e874582d61b40dbf0d495331fb96a)
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a recipe has been added to the workspace via "devtool add"
or "devtool upgrade" then the recipe file itself will be in the
workspace layer; if you run "devtool update-recipe" particularly in the
upgrade case you might think it would apply the upgrade to the original
recipe, but it will not - in order to remain consistent it has to update
the recipe that's in use which is the one in the workspace. Warn the
user in this situation so that they know what they need to do when they
are finished.
(From OE-Core rev: 4801b64243e57e554a593f0857dd53621d8f52e5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enhance the logic behind the 'auto' mode a bit by only updating the
SRCREV if the changes are already found upstream. The logic is simple:
update SRCREV only if the current local HEAD commit is found in the
remote branch (i.e. 'origin/<branch_name>'). Otherwise resort to
patching.
This affects a couple of the oe-selftest tests so update those as well.
[YOCTO #7907]
(From OE-Core rev: 9b9733b7d74032aef4979bec553019421e77da14)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Through -s/--disable-parallel-make, the user can turn off parallelism
on the make tool. This can be useful when debuging race condition issues.
In order to set PARALLEL_MAKE = "" a post-config file created and then
passed into the build.
[YOCTO #7589]
(From OE-Core rev: 0bf2e4b3edfc43e7a2e8d3387a9370d110533b7c)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The intention is to have a single file for each devtool feature
so devtool can grow in a modular way. In this direction, this patch creates
build.py, moving all related build features from standard.py to build.py.
(From OE-Core rev: 61bb1759f7ecb8b404f7d97573c61aef31f2f109)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgrades a recipe to a particular version and downloads the source code
into a folder. User can avoid patching the source code.
These are the general steps of the upgrade function:
- Extract current recipe source code into srctree and create a branch
- Extract upgrade recipe source code into srctree and rebase with
previous branch. In case the rebase is not correctly applied, source
code will not be deleted, so user correct the patches
- Creates the new recipe under the workspace
[YOCTO #7642]
(From OE-Core rev: 4020f5d91b3e4d011150d5081d36215f8eab732e)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow the _add_md5() function to be called with a directory in order to
recursively add the files under it. Additionally, we need to skip
preserving empty directories (since directories aren't listed in the md5
file).
(From OE-Core rev: 9383af78adc854a6f6de8b1520edf3cea0c477a6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will now also be used by "devtool upgrade".
(From OE-Core rev: 0d0b8425eaf74a6d7f3d9f6471e6edca1a273c06)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Do not put 'do_shared_workdir' into SRCTREECOVEREDTASKS when creating
bbappend for kernel packages. This will allow building packages that
depend on the shared build artifacts of kernel.
[YOCTO #6658]
(From OE-Core rev: 2355ccc627c0003a14693d1a023a003b7b44ea53)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wic uses bitbake variable ROOTFS_SIZE to set correspondent
partition size. This variable is a literal representing
float value. Wic crashes trying to convert it to int with
the error: invalid literal for int() with base 10: '10166.0'
Fixed this by converting variable to float and rounding result.
This should work for int and float literals.
(From OE-Core rev: 3479e299b5f11dfcd3f5f97c4ad3e0449f6c6d6a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enable updating the installed extensible SDK from a local or remote
server, avoiding the need to install it again from scratch when
updating. (This assumes that the updated SDK has been built and then
published somewhere using the oe-publish-sdk script beforehand.)
This plugin is only enabled when devtool is used within the extensible
SDK since it doesn't make sense to use it next to a normal install of
the build system.
E.g.
devtool sdk-update /mnt/sdk-repo/
devtool sdk-update http://mysdkhost/sdk
(From OE-Core rev: 32cbd4c57fc8ca097a18929fc404c07322ef36dd)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel package needs "kern-tools-native" in order for it's
do_kernel_metadata. Thus, devtool extract for kernel in a pristine
environment fails. With the current bb.tinfoil implementation it is not
possible to run arbitrary bitbake commands - e.g. run
"bitbake kern-tools-native -c populate_sysroot" in our case. This patch
implements an ugly workaround for that problem, basically by hardcoding
this dependency and running the required bitbake task(s) before tinfoil
is initialized.
[YOCTO #6658]
(From OE-Core rev: a9eb80de164fb8a464e29bf1cc6c7cf397f36662)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change handling of kernel packages so that the "initial rev" is parsed
correctly. Also, the devtool-specific git tags (devtool-base and
devtoo-patched) are now generated for kernel packages as well.
[YOCTO #6658]
(From OE-Core rev: 65fe3e45b10c5578446c758f66840891c62cd774)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set SRCTREECOVEREDTASKS appropriately in the workspace .bbappend file
for kernel recipes. This tries to ensure that all needed tasks (esp.
configure and patch) are run when building the kernel - tasks which
would normally be disabled by externalsrc.bbclass.
[YOCTO #6658]
(From OE-Core rev: f0a3a38a653c643468452eba43a12795136720c9)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made short variable names longer and more readable.
Fixed pylint warnings "Invalid variable name" and
"Invalid argument name".
(From OE-Core rev: 872cb0d5d79b26f34e6b35d7be8870d245021be4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Functionality of listing and using properties of wic images
does not exist in the wic code. However, there are plenty of
help and usage content about it, which is very confusing.
Removed everything regarding image properties from wic codebase.
(From OE-Core rev: af0a6d547a5a3efefdd4900f7079dfd10b85342d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Renamed variables named as Python builtin functions.
(From OE-Core rev: bed98142e3e47ac2862ccf8fe3e4bdeabfc91172)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed or reworked code with unused variables.
(From OE-Core rev: 3644b9f5ca25dfc61d4f5eda0f073c8a879b492b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed pylint warning:
Instance of 'ConfigMgr' has no 'create' member (no-member)
(From OE-Core rev: 41e319730cdd9c320ae4d855df7aaff6f1679aaf)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
cmdln.py https://pypi.python.org/pypi/cmdln was used in
creator.py to parse image plugin options and arguments.
There is no need in such a sofisticated API to do this
simple task. Standard option parser optparse.OptionParser
can do it just fine.
Modified Creator class to work with option parser.
Removed cmdln.py from the wic codebase.
(From OE-Core rev: 1e5220f74830b99cf8340a4f6977399b5cf49871)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed pylint warning:
More than one statement on a single line (multiple-statements)
(From OE-Core rev: fa43b8b482a9423208f5d2c12994fa15bcbddbb2)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used explicit imports in partitions.py and wicboot.py
(From OE-Core rev: 975d919a0f81b06a5e9f99096e92e34e7fbf4b90)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the followring errors found by pylint in partition.py:
E: 42, 0: class already defined line 33 (function-redefined)
E:429,63: Undefined variable 'fs' (undefined-variable)
E:432,37: Undefined variable 'fs' (undefined-variable)
E:481, 0: class already defined line 33 (function-redefined)
E:488,22: Undefined variable 'OptionValueError' (undefined-variable)
(From OE-Core rev: 83b1aa4b6480b625d1accee4c594162df2e84b96)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved functionaly of micboot.py Mic_Bootloader class to
Wic_Bootloader class of wicboot.py module.
(From OE-Core rev: 0be568537072d9b0027a0d3a532fc4696184453b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved functionality of Mic_Partition and Mic_PartData classes
from micpartition.py to Wic_Partition and Wic_PartData classes
of partition.py module.
Reduced level of inheritance.
Removed confusing mic legacy names.
(From OE-Core rev: eae139af81262b457cfb8ddf45a99523cc8a41cc)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved content of scripts/lib/image/ to scripts/lib/wic as
one directory with the same name as a tool is self-explanatory
and less confusing than two.
(From OE-Core rev: 5dc02d572794298b3362378cea3d7da654456c44)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Latest kernel doesn't have ext3 compiled in. Wic images produced
from canned .wks can't boot because of that. Switching to ext4
fixes this issue.
(From OE-Core rev: d281a65a81f369fc8d75023b8f911ce4106969c1)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added couple of hopefully useful comments to the code.
(From OE-Core rev: 72dfe5b58c637d74971e025aef3ce0a64dc8172c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed <image>.bbappend before generating it again as
it may cause tinfoil to fail due to its wrong content.
It's safe to do as <image>.bbappend is regenerated anyway.
(From OE-Core rev: 82c6452ca953eb32e2919d9f9e64497a15212be5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added logger calls to show if image is modified by the
plugin or not.
(From OE-Core rev: f719e956a6263784963b6ae9514030a1a1dc2aeb)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added notification callback to <image>.bbapend to notify
user that image is modified by build-image plugin.
(From OE-Core rev: 53cb00b8af58c326e2a045cd6f8a04a24dc4c1b5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Filtered out non-target recipes and recipes with
recipe name != package name in build-image plugin.
Isolated all logic of getting recipes in _get_recipes
function.
(From OE-Core rev: efe685711ae6f4beec06ba591c74140ce56b96af)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made parser help message and description more clear in
build-image plugin.
(From OE-Core rev: 39714557dde70c4b1ce8d08c7e1d21fd39a1d1a6)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used logger variable name instead of LOG as it is used the rest
of the devtool code.
Pylint complains about 'logger' being invalid constant name,
but it's better to be consistent in naming.
(From OE-Core rev: a1c811df93e831a198464008564ce33ec98a3049)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 69c63728da.
Moved add_md5 back to standard.py as it's not used in
any plugin anymore.
(From OE-Core rev: 3823b7abf8c1e82e0448d7283de95422fd262135)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved standard.py:_parse_recipe -> __init__.py:parse_recipe and
standard.py:_get_recipe_file -> __init__.py:get_recipe_file
to be able to call them from other modules.
(From OE-Core rev: f0e61a0d5597017c5f5d2dafb41118b79f505d9b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It doesn't make sense to use it as image recipe is not
in workspace. It means that we can't do 'devtool reset'
for the recipe, which is a main point of using add_md5.
(From OE-Core rev: f69613ed9d56c6e6ba322d8c9db07b7ed802042a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If bitbake image is referenced in .ks file and --size is not used
there wic uses ROOTFS_SIZE variable to set minimum partition size.
ROOTFS_SIZE is calculated in meta/lib/oe/image.py when rootfs is
created. The calculation is done using other image parameters:
IMAGE_ROOTFS_SIZE, IMAGE_ROOTFS_ALIGNMENT, IMAGE_OVERHEAD_FACTOR
and IMAGE_ROOTFS_EXTRA_SPACE.
(From OE-Core rev: 173d440c14ee3140ae08c6a87decc9b2f4c9e391)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added functionality of getting variables from <image>.env files to
BitbakeVars class. env files will be parsed if the directory with
env files is known, i.e. when vars_dir attribute is set.
Otherwise 'bitbake -e' output will be parsed.
(From OE-Core rev: d21e4c1e56cab750ed4f6031d7f3dc5775a2c2cc)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New attribute is used when bitbake variable is requested without
specifying image name. The attribute should be set from outside,
for example when wic is called with '-e <image>' option.
(From OE-Core rev: 38d0b3744b5829333148ac4fc97dc45a8d0ba3a5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved code that parses one line of 'bitbake -e' output
to separate method _parse_line.
This method will be also used later to parse lines of .env files.
(From OE-Core rev: 49ef04d3c9eeb76cbbc89b27b4dd1570b7a2552b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved code of getting bitbake variables into separate class.
Created singleton object of this class in the module namespace.
Preserved existing API get_bitbake_var.
(From OE-Core rev: 3229d37993e315c9ca1902849746b9f50f35845c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If get_wic_plugins_help is called from wic main module
it calls git_bitbake_var at some point. This fails when
wic is called from bitbake as 'bitbake -e' can't be
run.
Moved call of this method to help.py in order to call it
later, when BitbakeVariables singleton is properly initialized
to get variables from .env files.
(From OE-Core rev: d401a8518fb4b0e8adeb34be8948fa780299870c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Renamed variable help -> hlp as 'help' is a name of Python
built-in function.
(From OE-Core rev: 94c85fdaec36bfda509be4a66082a0156bf76695)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Renamed __exec_cmd -> _exec_cmd as double underscores cause
strange behaviour when function is called in class method.
Python complains that __exec_cmd method(!!!) of the same class
doesn't exist.
(From OE-Core rev: 3b400a06d755e3d437967f60842b1d9bd94f0814)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implemented new plugin to build image from workspace packages.
Plugin creates <image>.bbappend file, adds
all workspace packages to the image using IMAGE_INSTALL_append
variable in bbappend file. After that it runs 'bitbake <image>'.
(From OE-Core rev: 00bc43868da3ea2a4532215d3abef8e150c7b2e5)
(From OE-Core rev: fc35c10fed382e385f00b76abcee94a0148b4aee)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved _add_md5 function from standard.py to __init__.py to
be able to call it from other modules.
(From OE-Core rev: ee38bb20dc7ba21dac782d8d13383f81dfedef55)
(From OE-Core rev: b07da7d38bcefe8efdd6b22bb9251bef599ef040)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Drop PR = "r0"
* Use SUMMARY instead of DESCRIPTION
(From meta-yocto rev: 433044641e2500f40fbd72d91bbc38d5cb288c1e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add kickstart file for generating a hybrid bootable iso image using
isoimage-isohybrid plugin, the output image is HYBRID_ISO_IMG-cd.iso,
the label is HYBRIDISO, and the rootfs.img file is an image with ext3
file system, and uses grub as bootloader for EFI boot and
syslinux for legacy boot.
(From OE-Core rev: e8769d52d6d8c67ba18595ebd27f5022bd0e66c4)
Signed-off-by: Mihaly Varga <mihaly.varga@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This plugin creates a hybrid, legacy and EFI bootable ISO image.
The generated image can be used on optical media as well as
USB media.
Legacy boot uses syslinux and EFI boot uses grub or gummiboot (not
implemented yet) as bootloader. The plugin creates the directories
required by bootloaders and populates them by creating and
configuring the bootloader files.
The plugin adds an image file to the iso which
contains the directory tree of the rootfs folder specified by the
--rootfs argument or by the IMAGE_ROOTFS bitbake variable.
Using the isohybryd tool, the created .iso image is enhanced by a MBR
for booting from disk storage devices, consequently the provided
iso image could be copyed directly by dd comand onto USB drive or
could be burned to an optical media by using a suitable image burner.
The plugin depends on parted, e2fstools, syslinux, grub, cdrtools,
dosfstools and mtools program.
Some of the functions in this plugin were inspired from bootimg-efi.py
and bootimg-pcbios.py plugins implemented by Tom Zanussi.
(From OE-Core rev: 289c534b5d990e22e5547496f5f84cc9721ce3ee)
Signed-off-by: Mihaly Varga <mihaly.varga@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Let's have the caller do this and then the function is a bit more
flexible (e.g. we can choose to parse with bbappends or not); fix up
calls to this function appropriately (of which there are only two, both
within devtool).
(From OE-Core rev: 6ba969f1ac5a1a0e277a21287fc5ae1622a6b14e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a recipe is BBCLASSEXTENDed (e.g. to -native), its PN value and the
name of the bbappend will be different; we were assuming them to be the
same when reading in the workspace, leading to us seeing the base recipe
name everywhere afterwards.
Also add a test so we ensure this doesn't regress in future.
Fixes [YOCTO #8157].
(From OE-Core rev: b63fca00c2e24ad0c8b8b3c492d93ee4372fa92d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ensure that the "patches" subdirectory is removed from the right
location when S == WORKDIR (e.g. devtool extract makedevs).
(From OE-Core rev: 2062c88726400e09599aff51af95799a866b90c9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In case the user has set up externalsrc outside of devtool, force
EXTERNALSRC to blank for the recipe when extracting so that the original
source URI is still in SRC_URI and we're still able to extract it. (This
isn't a problem with devtool itself because the bbappends within the
workspace layer that apply externalsrc are explicitly filtered out when
devtool parses a recipe).
(From OE-Core rev: 5be16d639d1b78d114755bfd552ac901d0fdf4a9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemu-directdisk.wks creates a raw disk image
that a qemux86* machine can boot from.
(From OE-Core rev: 3b1a2baa95fee7479e85379c0f6f4d54c0db2042)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed unused global variable wks_vars and 2 unused functions
get_wks_var and add_wks_var.
(From OE-Core rev: 7d87c821da6a5020e8dde3f1907fb8d6a023b110)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
exec_native_cmd was modified to report recipe to build
native programs.
Pairs executable->recipe are hardcoded as it's not possible
to obtain this information automatically.
[YOCTO #7631]
(From OE-Core rev: 1274379c91ee8e2fb9fbb34a6445cd5767eb4a35)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Included full console output and example of the .wks file
into the 'wic help overview' content.
Used qemux86-64 machine instead of crownbay to make example
working without cloning additional layers.
[YOCTO #7940]
(From OE-Core rev: 68d391eaf4fe9fc37e3278255d5da170f98b8763)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made command line specification less confusing.
Reformatted usage output.
[YOCTO #7938]
(From OE-Core rev: c4a44ad4c5aa65657b69b811e793f98418159348)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes it easier to extend, as a layer can add its own sub-commands.
Argument parsing is also separated into two steps, the same way it's done in
recipetool, as we need access to the global command-line arguments early,
before plugins are loaded, both for debugging arguments and for the bitbake
path (we need to load the bitbake module to get tinfoil, which is now needed
to load the plugins).
Rather than constructing tinfoil once and passing it through into sub-commands
for their use, we have to construct it for configuration metadata, use it, and
then shut it down, as some sub-commands call out to recipetool, which needs
its own tinfoil instance, and therefore needs to acquire the bitbake lock. If
we're still holding the lock at that point, that's clearly a problem.
[YOCTO #7625]
(From OE-Core rev: f9bc3b27244a141ec7273445d3ea139a047e0ddf)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes the function more reusable for other sub-commands.
(From OE-Core rev: c6feb6e97c9929560b1e3cec280c1d7976ecc030)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When determining the path from WORKDIR to the extracted sources, we're using
S, but if S is in work-shared, that's problematic and won't give us good
results, so assume 'git' for that case, warning when appropriate.
(From OE-Core rev: dc70cf470f18c97b6762cbf7aca723769b47bc7d)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-d is already taken for --debug.
(From OE-Core rev: fc174debb073c99a0cabf4f00e66ab36c7e93989)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you have multilib enabled, it finds lib32-base-files instead of
base-files for test_recipetool_appendfile_basic causing a test
failure. Add a fix for this.
(From OE-Core rev: c9821a56da9c6e341408ea21e0d8a4cc5291dba6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set default set of bitbake variables to the set of variables
for the first parsed image.
This allows wic to find proper bitbake varibale values
if it's called with '-e <image>' even without specifying
image in the call of get_bitbake_var.
(From OE-Core rev: 18cc6d2ec4dc289bb0333dddc96df5a645ea53d0)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved code of __write_partition to 'assemble' method.
This way it should be more readable.
(From OE-Core rev: f7059362053c87f96ce68d1ab850962defb76540)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made the code to backup and restore fstab only if it's modified.
Cleaned up the code. Made it more pythonic.
Improved code readability by moving code from several tiny
methods into one place.
(From OE-Core rev: e663b1857fd2975585003bfa4739f8f84c652708)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added --uuid option to the configuration of wks parser.
This option specifies partition UUID. The code to process
it is already in place. It was implemented for --use-uuid
option.
(From OE-Core rev: c7ffe3785e61f3c57aeeebc34ec573685f0ea6a8)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Image file name is not unique for the partitions without label.
This causes image being rewritten and used as a source for all
partitions without label. Wic produces broken or incorrect result
images because of that.
Added wks line number to the image name to make it unique.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved code out of prepare_empty_partition* methods
to avoid code duplication.
(From OE-Core rev: 7dc4e007aa9f02162b3f24705e9d9dba7a1cf7ef)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Shortened code by using getattr to obtain a method to call for
prepare_empty_partition_* and prepare_rootfs_* methods.
(From OE-Core rev: 066f713f71828ff6f408448e5ea4fcd56faa423e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Renamed partition images into <final image>.p<partition number>
This should make output directory look more organized and easier
to understand.
(From OE-Core rev: c826939e4eeed034f39207089ec1a7ed87c1c493)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved code out of prepare_roots* methods to avoid code duplication.
(From OE-Core rev: ab1c845758d4f80c82ffcf481007803905e45c29)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Switched debug level to 'normal' to prevent huge 'bitbake -e'
output to go into wic debug output. This should help to make
wic debug info much more clean and easier to read.
(From OE-Core rev: 71510c32d78ba24bf1172548f8eb4adfe621d2de)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wic tries to find plugins in every layer and prints a message
'Plugin dir is not a directory or does not exist' if layer
doesn't have plugin dir. It causes a lot of duplicated
messages in the debug output, which makes it hard to find
useful info there.
(From OE-Core rev: e6ed2e07d70eaa07d4c2ab9e484eacedd193323e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wic doesn't show any information for the partition if label is not set.
Fixed this by adding mount point to the report.
(From OE-Core rev: 36be9c1f7a6fded146a6f1c268455d826d78f97b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wic gets bitbake variables by parsing output of 'bitbake -e' command.
This implementation improves this procedure as it runs 'bitbake -e' only
when API is called and does it only once, i.e. in a "lazy" way. As parsing
results are cached 'bitbake -e' is run only once and results are parsed
only once per requested set of variables.
get_bitbake_var became the only API call. It replaces find_artifacts,
find_artifact, find_bitbake_env_lines, get_bitbake_env_lines,
set_bitbake_env_lines and get_line_val calls making API much more clear.
(From OE-Core rev: 3abe23bd217315246ec2d98dc9c390b85cfe6a92)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds the `appendsrcfile` and `appendsrcfiles` sub-commands, which let the
user add or replace one or more files in the recipe sources, either in a path
relative to `S` or `WORKDIR`. Each file gets added to `SRC_URI` as a file://
URI, using the subdir= parameter to specify the destination directory.
Examples:
# Adds our defconfig as file://defconfig. If it's already in SRC_URI, it
# won't be duplicated.
recipetool appendsrcfile --workdir meta-mylayer linux-mel defconfig
recipetool appendsrcfiles --workdir meta-mylayer linux-mel defconfig
# Does the same, handling the different local filename
recipetool appendsrcfile --workdir meta-mylayer linux-mel defconfig.mine defconfig
# Adds our device tree files to the source tree
recipetool appendsrcfiles --destdir arch/arm/boot/dts meta-mylayer linux-mel *.dts
Of course, for the latter example to be of use, the new dts files would need
to be added to `KERNEL_DEVICETREE` as well, and depending on the kernel,
`DEFCONFIG` or `KERNEL_DEFCONFIG` may need to be set.
Cc: Paul Eggleton <paul.eggleton@linux.intel.com>
(From OE-Core rev: 8227172d05fb394d79ff83d3c36f5208ebebf92c)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This validates the arguments early, when argparse is parsing the arguments, in
a consistent way.
Cc: Paul Eggleton <paul.eggleton@linux.intel.com>
(From OE-Core rev: bec92899f5324a4423b4ee70365eaa5dfb6891a6)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used more pythonic way to make a list.
(From OE-Core rev: 42b86a1654452348036c5d348d2fa5fe27e98245)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implemented compressing result image with specified compressor.
Updated reporting code to show compressed image.
[YOCTO #7593]
(From OE-Core rev: 31791fa7a168e6b6fb030aeb338c8233b4735af1)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added 'compressor' argument to Direct plugin API to
pass a name of compressor utility.
(From OE-Core rev: 34c583274c2908351e3a84dd629302f1975f2f0d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added 'compressor' argument to wic_create to pass a name of
compressor utility to the wic engine.
(From OE-Core rev: 33d38aefb06f8849b46c5f9f6c1db73b4dccd985)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added -c/--compress-with command line option to 'wic create'
subcommand. This option is used to specify compressor
utility to compress the image produced by wic. gzip, bzip2 and
xz compressors are supported in this implementation.
(From OE-Core rev: 8425ef0a67aa5ca7b2dbf4c461004af555aa0c96)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If patches fail to apply with git, quilt it used as a fallback. If that
happens, the code in this class is meant to handle cleanup of these patch
files. In the case where ${S} is a subdir of the git tree, the code doesn't
correctly set the patches directory.
This change correctly sets the patches directory (which is different to the
location of the git repository).
[YOCTO #7911]
(From OE-Core rev: de6e0f3af5e858960676ea291036e59105fd806f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Return 1 if command doesn't exist or wic is called without
any commmand.
Return result of invoke_command as wic return code.
Added tests for unsupported command and no command.
Fixed typo in test case test02_createhelp spotted by this fix.
[YOCTO #7856]
(From OE-Core rev: ebd9f7b1da8ed556e98aab4d5f4e81707ac44b27)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added mechanism to show docstrings of plugin classes as a part of
plugins help page.
For missing plugins the following warning message is shown:
<class '<plugin class spec>'> is missing docstring.
[YOCTO #7118]
(From OE-Core rev: 0997208266686473d23aed0fab58a1fd7c5d8cae)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Docstings from plugin classes are used as part of
output of 'wic help plugins'. Adding them makes help page
more informative.
(From OE-Core rev: d4414b45c81ab539f75a7bb16fc6412c30dfc45f)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed wrong name for the first argument in class methods.
Pylint complains about the issue this way:
Class method should have 'cls' as first argument
(From OE-Core rev: cd7c72d6d5a5110173d0d3f60f2991b1dc30fc26)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added short explanation of how to create empty pattition
to the 'wic help kickstart' output.
[YOCTO #7131]
(From OE-Core rev: d92cda72ef605bf2f45437667c1fc36c76629d47)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It turns out that scp can't be used to copy symlinks because it follows
them instead of copying them, and this is by design (since it emulates
rcp which also behaved this way); the unfortunate result is that
symlinks that point to valid files on the host translate into the host
file being copied to the target (yuck). The simplest alternative that
does not have this undesirable behaviour is to use tar and pipe it over
ssh.
At the same time, it would be even better if we properly reflect file
permissions and ownership on the target that have been established
within the pseudo environment. We can do this by executing the copy
process under pseudo, which turns out to be quite easy with access to
the pseudo environment set up by the build system.
Fixes [YOCTO #7868].
(From OE-Core rev: 69adaed0e982d627ebfa57b360b0ee049ea7a276)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* It turns out that not all versions of the file command support the -E
option - the version in Ubuntu 14.04 doesn't support it for example.
This option is supposed to force file to return an error if the file
can't be opened - since we can't rely upon it then fall back to
looking at the output instead. (The results of this issue were simply
that we didn't notice if the file was executable and give a warning,
which tripped an oe-selftest failure - so it was minor.)
* If we receive an error there's not much point looking at the output to
see what type was returned because there wasn't one.
(From OE-Core rev: 7bf9dccef1aa626adc9c45addcd066fed69cace9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a long description and tweak some of the argument descriptions so
that it's clearer what the appendfile subcommand does and how it works.
(From OE-Core rev: a0a595307d28d0350c3752293ab8ebf499ee416f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use DevtoolError exception more widely for handling error cases. This
exception is now caught in the main script and raising it can be used to
exit with an error. This hopefully simplifies error handling. The
change also makes exit codes more consistent, always returning '1' when
an error occurs.
(From OE-Core rev: 2e4f1dcade7ccb581c7a390c32163ea3deeac6d5)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Continue refactoring of update_recipe() by splitting out the 'patch'
mode into a separate function.
(From OE-Core rev: cdcfedec5489a5d8d0df56bbe100e5fc2cca03af)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Refactor update_recipe() (i.e. the implementation of the update-recipe
command) by splitting out the 'srcrev' into a distinct function.
(From OE-Core rev: 5da26bfd8b34af9075b9b900d353df555d8f2ef0)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Just refactor the code.
(From OE-Core rev: 06f6b20f040d2e4eee577bb2111351523ee97af2)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A slight simplification of the code.
(From OE-Core rev: aff88bcebe335b0277df660ac22eeed28d65da44)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Split out the logic of determining "initial rev" and "update rev" into a
separate function.
(From OE-Core rev: 17206934822aab31d93318bffea8099bf9965112)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bootloader --ptable option has two valid choices: gpt and msdos
Moved this check to wks parser by changing option type to 'choice'.
Removed similar checks from 5 other places.
(From OE-Core rev: b812d0f40423bc56394cc8b6fc92eb1f477dba1b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added help for two wks partition options specific to
GUID partition table and globally unique identificators (GUID).
(From OE-Core rev: e21e31b48b20bf2f8a7733c52b436a65c27de8aa)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used --use-uuid option for root partition in directdisk-gpt.wks
This is useful to have example of image with UUID support.
(From OE-Core rev: b7ae24c9ee52cf1e7eed8cc7e2c081cda7147376)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set type GUID and UUID for partition using sgdisk utility.
Type GUID can be specified for partition in .wks with
--part-type option.
UUID is generated when --use-uuid option is specified for
partition.
[YOCTO #7716]
(From OE-Core rev: c3cb9eb31570b2a92c8081a6b3716cb7443b1506)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With this parameter it's possible to pass generated UUID
into Image class to set it for partition when it's created.
(From OE-Core rev: e4bc71fa78b0d7a60aa85b8eb09a053545b61b84)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced DirectImageCreator._get_boot_config private method
with a 'rootdev' property.
Simplified the code and API.
Used 'uuid' property instead of incorrectly used 'part_type'.
(From OE-Core rev: 4a303007149ea1205bbd454e70810e7dfa343d4c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic crashes with "TypeError: %d format: a number is required, not str"
Due to incorrect format used for Wic_PartData.extra_size attribute.
Using %s instead of %d should fix the crash.
(From OE-Core rev: 2cae0473971ff3983c7e423c23215b342c7dad1d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
'uuid' attribute of partition object is set to generated uuid
when --use-uuid option is used for partition in .wks file.
(From OE-Core rev: 4bfe81a88653f4851ec24eef9e5ee51960cb101b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added --use-uuid option to the configuration of wks parser.
Processing of this option will be implemented in the following
commits.
(From OE-Core rev: b2b6ff9dcf8c8b1c01ddf13894b8318becf4a8d0)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed some pylint findings in partitionedfs.py
(From OE-Core rev: fcb891a391a34fad15d99edfea6b0f022fc0d1c9)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no need for yet another wrapper around exec_native_cmd.
(From OE-Core rev: f0f163e55865dc10d2a4188b5f2d759836c13f68)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Checked for return code and output of native commands
inside exec_native_cmd.
Removed similar code from a lot of places where
exec_native_cmd is called.
(From OE-Core rev: 9e3e933321d58c04619a585326fb291dbf2748f5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These functions are not used anywhere.
(From OE-Core rev: 7467fd446d08704881325577b7035b6128db6151)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
directdisk-gpt is the same as directdisk with only one difference:
it uses GPT partition table.
(From OE-Core rev: 3d3dad40f3f51070a33e2ba28c0fc14ffcc3c2a5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
create mode 100644 scripts/lib/image/canned-wks/directdisk-gpt.wks
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Names with one leasding underscore considered protected in Python.
_ptable_format is accessed outside of its class.
Made it public by removing underscore.
This pylint warning should be fixed now:
Access to a protected member _ptable_format of a client class
(From OE-Core rev: 72599b5500ebdd0c418a0ef1e2c93c833bd31d75)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used proper syslinux MBR gptmbr.bin for GPT partitons.
Added check for unsupported partition formats.
(From OE-Core rev: 6174983e20bd24422e5cee57e78dce9c92cb3c15)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Only msdos partition table format was supported by wic source
plugins.
(From OE-Core rev: 0e119d469796a19fbeae61a7162fd70660c936a5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Specifying partition type(GUID) makes sense for gpt partition table.
Current code checks if part-type is specified and throws exception
if it is. This makes sense to do only for msdos partition table.
(From OE-Core rev: 52dcccbead0c57d1a3f4afd2f9c7a38a985301ec)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This flag is used to tell special purpose software that
the GPT partition may be bootable.
(From OE-Core rev: 3ec5e2892c5ee312c44f4425096450a1914ce44a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All wic exceptions are now inherited from new base exception
class WicError. It makes them easy to maintain and catch.
Processing of exceptions is done this way:
Known wic exceptions cause wic to print error message to stdout.
Unknown exceptions are not catched anymore and produce standard
python traceback.
(From OE-Core rev: e5e2c18ce4344c14d9e52ece916333bd0a619281)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bunch of os.remove calls were added to the partition.py lately.
They're causing wic to fail with OSError: [Errno 2] No such file or directory
if file doesn't exist.
Added check for file existence to all recently added calls of
os.remove. That should fix this regression.
(From OE-Core rev: 75162b05b5ad9aac307f7911caecb2b8a017acbf)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Quite often what you want to do having made customisations to a piece of
software is to apply those customisations in your own layer rather than
in the original recipe. Thus, add a -a/--append option to the
update-recipe subcommand which allows you to specify the layer to write
a bbappend into. The bbappend will be created at the appropriate path
within the specified layer directory (which may or may not be in your
bblayers.conf) or if one already exists it will be updated
appropriately.
(This re-uses code written for recipetool appendfile.)
Implements [YOCTO #7587].
(From OE-Core rev: 87d487ea4fdfb6cd30e3b3fad47732db12e86f23)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Locating which recipe provides a file in an image that you want to
modify and then figuring out how to bbappend the recipe in order to
replace it can be a tedious process. Thus, add a new appendfile
subcommand to recipetool, providing the ability to create a bbappend
file to add/replace any file in the target system. Without the -r
option, it will search for the recipe packaging the specified file
(using pkgdata from previously built recipes). The bbappend will be
created at the appropriate path within the specified layer directory
(which may or may not be in your bblayers.conf) or if one already exists
it will be updated appropriately.
Fairly extensive oe-selftest tests are also provided.
Implements [YOCTO #6447].
(From OE-Core rev: dd2aa93b3c13d2c6464ef0fda59620c7dba450bb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Most of the time when bb.note() gets called we want to see the output,
so ensure the level is set appropriately depending on the command line
options instead of being fixed at warning. (We don't want to see the
notes for fetch/unpack/patch though as they are too verbose).
(From OE-Core rev: 69f426a2d966a2228cbdc708b9ddab31005c6d96)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove intermediate partitions that may have been created by a previous
wic invocation. Those partitions are causing issues on some systems. In
particular vfat partition creation is hanging on mcopy execution on
Fedora.
(From OE-Core rev: 8d2587d87601a7ff0fad840dabc07d66363b2810)
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using tinfoil here is quicker and tidier than shelling out to
bitbake -e and interpreting its output.
(From OE-Core rev: 986ad99aee98dd5b7f30d59098dd9275097b8276)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we execute an external command, we ought to prepare for the
possibility that it can fail and handle the failure appropriately. We
can especially expect this to happen when running bitbake in this
scenario. Ensure we return the appropriate exit code to the calling
process.
Fixes [YOCTO #7757].
(From OE-Core rev: 98a716d79bfc5434a5b42d3ca683eab3eea30a41)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Before this change, all files from the recipe (SRC_URI), including
patches, were added to to srctree repository when S==WORKDIR. The patch
files are useless as they are automatically applied on top of the
srctree by devtool.
This change causes devtool extract to not commit these unnecessary (and
possibly confusing) patch file(s) into srctree repository.
[YOCTO #7602]
(From OE-Core rev: 3e0ffff619e49b1f0c13e5f6a663455be3ed26af)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After OE-Core commit 67db7182faf6742b0d971d61d8c5ba34f69d2e12, PV is
appended to the end of the gcc-source PN, thus we need to handle that in
devtool and the corresponding test.
Part of the fix for [YOCTO #7729].
(From OE-Core rev: 440029dc229a566b9bead1481215d5e5760c5fe6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The wic plugin creates a disk image containig one ext2/3/4 partition.
No additional boot partition is required. Syslinux is installed into
the image. The target device is a legacy BIOS PC.
Purpose of this plugin:
Other avaliable plugins create a fat partition for /boot and an ext
partition for rootfs. Current linux-yocto kernel packages are not
compatible with this disk layout. The boot partition is not mounted
by default, hence the kernel is installed into rootfs and not into
boot partition. A kernel update ends up in a bricked device. The old
kernel which is still in boot likely does not even boot with updated
kernel modules from /. Even if the boot partition is mounted during
the kernel update the update will fail. The kernel package installs
a symbolic link which is not supported by the fat partition.
Creating just one ext partition for boot and rootfs solves all issues
related to package based kernel updates on the device.
The plugin depends on syslinux-nomtools a user space installer for
syslinux on ext filesystems.
Thanks to Robert Yang who implemented syslinux-nomtools and supported
the implementation of this plugin.
(From OE-Core rev: 4a7bd79b5100a496c9b1597b57d6dc18ba2b9c83)
Signed-off-by: Adrian Freihofer <adrian.freihofer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provide a means to set SRCREV immediately by using rev= in the URI; if
it is specified then it is removed before setting SRC_URI and SRCREV is
set to the same value instead.
(From OE-Core rev: c9304fcb0a2b81700d0ed5c13b4d976bd4230ce3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Recipes that fetch from git, svn or hg by OpenEmbedded convention
should normally be named with this as a suffix, since PV is meant to
be set appropriately within the recipe, so follow this. In order to
make this work we need to be able to have the version independent from
the file name, so add a -V option to recipetool create to allow this
to be specified.
* If -V is specified on the devtool add command line, ensure at PV gets
set to include this version.
(From OE-Core rev: 2b997c41c6476a13bf516586d56a9051aceb93ec)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a -f/--fetch option to fetch a remote URI (into the already
specified source tree path) and set this as SRC_URI within the recipe.
This simply wraps around the existing functionality in recipetool.
Implements [YOCTO #7644].
(From OE-Core rev: f22fd77e735fc5f4a3434e3d1f567a9d7d191cf4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If -x is specified and the specified URI was a git repository, we need
to ensure that the resulting clone is a sandalone and not one that has
pointers into the temporary fetch location or DL_DIR (since the git
fetcher does a local clone with -s). Split out the code from devtool
that already does this for "devtool modify -x" and reuse that.
(From OE-Core rev: fc47e8652ef32e7399f57c80593df90dc52d8b84)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When -x was specified, we were getting the normal unpack subdirectory
which we don't really want - if there's only one subdirectory unpacked
then we should effectively copy just it to the extraction path, not as a
subdirectory under it.
(From OE-Core rev: 0eeecce96a0aa757c2c4c4ac4d82e3bcbf0f982c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you've done "devtool add" (or "devtool modify" without -x) then it's
possible that the external source tree is not a git repository, so we
should handle that case here instead of printing a traceback.
(From OE-Core rev: eb2147aa8facd4ef33a0749e9ae660ec686dad48)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the proper bbappend file name, don't just assume it will have a
version suffix (because it won't if the original recipe doesn't).
Fixes [YOCTO #7651].
(From OE-Core rev: 3332d68ef7b2a300ce8dcf5021497d98e5b17baa)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you manually delete files in the workspace layer (which you really
shouldn't) it was possible to get yourself into the situation where you
couldn't reset because we were attempting to check if the file had been
modified and erroring out if it couldn't be opened. If the file's not
there anymore there's not much point checking if it needs to be
preserved, just skip it.
(From OE-Core rev: d2d352f7b747a97a54df9d20eb1455d166aa1ee3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We weren't adding the version into the bbappend file name when -V was
specified which meant that building or resetting failed.
Also adjust one of the tests so that we're testing devtool add both with
and without this option.
Fixes [YOCTO #7647].
(From OE-Core rev: bdbeff0cd342e31053d7203d78fc5dda611052b1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to get correct metadata, SRCREV for example.
Fixes [YOCTO #7648].
(From OE-Core rev: 8b1794559dd7fd956716179d628e61cffdce1686)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This option can be used to have a separate build directory, in order to
keep the srctree directory clean for packages that do not need to be
built in the source directory.
(From OE-Core rev: 5cc348c0a3016e4ccc1e80d099e2e197b3b38bd2)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Makes the build succeed for packages which do not support separate build
directory, e.g. zlib. The same outcome could be achieved with the
--same-dir option, but, it's generally hard to tell if a random package
would need that option. The negative side effect of this patch is that
dev srctree (of some packages that build fine without this modification)
gets dirtied by build artefacts.
(From OE-Core rev: 6ac5692426956e276ba2119f917b0f30791e6cd6)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Acked-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Here is what PEP8(Style Guide for Python Code) says about this:
Wildcard imports (from <module> import *) should be avoided, as they
make it unclear which names are present in the namespace, confusing
both readers and many automated tools.
(From OE-Core rev: 13416c1941f5dc8abcdb0073f2104a89eae2d6f1)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ubuntu's default dash shell causes oe-init-build-env to behave a bit
differently - (a) it can't pick up the OE root directory and (b) it
can't see any build directory specified as a command-line argument
(since dash doesn't pass through any arguments specified to sourced
scripts). We could work around these but doing so requires some internal
knowledge of the script; a much simpler fix is just to force running the
command under bash since it's expected to be installed on every distro.
Thanks to Chen Qi <Qi.Chen@windriver.com> for this fix.
Fixes [YOCTO #7614].
(From OE-Core rev: 27942f546e6b08cdf9f2dbda2e24d237cde7f5f5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Give the correct data object ("config data" instead of "recipe data") as
an argument to oe.recipeutils.patch_recipe()
Fixes [YOCTO #7595]
(From OE-Core rev: 7d2b918019b0afe215a6489dad697afac34f73e9)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added bitbake error output to wic error message to make it
more descriptive.
[YOCTO #6911]
(From OE-Core rev: f68576d4c9cecbe7122325d7fc78c9b27ff07a8e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used exec_native_cmd instead of find_binary_path to run parted.
Got rid of find_binary_path as it's not used anywhere else.
There are several tools wic is trying to find not only in sysroot,
but also in host root. Parted is a special as on some distros it's
installed in /usr/sbin, which is not in the user's PATH. This makes
wic to fail with error "External command 'parted' not found, exiting."
[YOCTO #7122]
(From OE-Core rev: 76adf38c0d8e0faf04a5ecb3fcfbe831c85bb81f)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Included name of the missing program into the error message produced
by exec_native_cmd when program is not found.
Removed mentioning of the host programs as this API is not running
them anymore.
(From OE-Core rev: 7d1599cf6a55d3624d2b90c1f55e14c4df73e570)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
exec_native_cmd should not use host paths in $PATH to
avoid finding and using host tools.
[YOCTO: #6204]
(From OE-Core rev: fa263f238bbddb00c9953994fb69cc358170e2ec)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-f/--build-rootfs option makes wic to run bitbake <image> to
produce rootfs. This option requires image name to be specified
with -e/--image-name.
(From OE-Core rev: 75ae0b7cf3863eb2857a2b6a7073beea626f751d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ontrack dm6 aux3 is a type of partition required to be able to boot a Freescale
mxs based platform.
(From OE-Core rev: aa2d05c58992810a5f816eef8078facf03a07e3c)
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The size comparison may fail because it is done on strings rather than
integers.
(From OE-Core rev: 2ef885329cfd0351f551a33dcf3f42e25f38dea7)
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add 3.19 kernel support and remove 3.10 and 3.17 support.
'Fixes' [YOCTO #7391].
(From meta-yocto rev: fe9b3c567230e815f528431f1098626669a9568f)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a license file matched more than one of the specifications (e.g.
COPYING.GPL) then it was being added to LIC_FILES_CHKSUM more than once.
(From OE-Core rev: 58316a2890782d206e9b9472ba483367f7560109)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a dry-run option to the deploy-target and undeploy-target
subcommands so you can see the list of files to be deployed or
un-deployed before actually carrying out the operation.
(From OE-Core rev: b9625581f3fe72fc402632be2d87cf889301c6a2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The -q option to scp does stop the progress being shown, which is mostly
superfluous, however it also stops errors from ssh being shown - if
there's a problem, you'll just get "lost connection" which really isn't
that helpful. As a compromise, add a -s/--show-status option and
advertise this when the command fails.
(From OE-Core rev: 5cbb026212b4c8f5206a07d70b94f57edeee0839)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you haven't built the recipe yet or if the output directory (${D}) is
empty, then we should tell the user rather than have scp error out.
(From OE-Core rev: 3fd9ac277393bef5c646f16b9d8f30c277881d70)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you're testing with multiple images/devices that have the same IP
address / hostname then it can be annoying to deal with host key
mismatches all of the time. As a MITM attack is unlikely in the local
test environment, provide a command line option to pass the appropriate
options to scp/ssh to disable the host key checking.
Note: if you wish to apply this permanently, the best way is to do it
through your ssh configuration e.g. by adding the following to your
~/.ssh/config:
Host 192.168.7.2
UserKnownHostsFile=/dev/null
StrictHostKeyChecking no
(From OE-Core rev: 81dd1319112a99bc38b7a7ced0663918ac5b09a4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Consolidate code for checking compatible recipes and consider meta and
packagegroup recipes as well as package-index and gcc-source to be
incompatible.
(From OE-Core rev: 4be9bf637583b341a89af1b9924752abc7d49c94)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you point devtool modify to a source tree previously created by
devtool modify or devtool extract, then we need to try to pick up the
correct initial revision so that devtool update-recipe knows where to
start looking for commits that match up with patches in the recipe.
(From OE-Core rev: c20e10543e268ebb43074a3f8d6e7ed991e54ec8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a -a/--all option to allow you to quickly reset all recipes in your
workspace.
(From OE-Core rev: 0c83788b111a761f6f500b86780cc51aed255402)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No functional changes, just use a unique name for each parser.
(From OE-Core rev: 5fabc59d6221c3fe7137b70e31ec2761a4276a6c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Pass correct arguments to undeploy() function
* If an error occurs during undeploy(), exit instead of continuing
(From OE-Core rev: c938dee4b28af7e6296c86347dfa533f85605033)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used default values of PSEUDO_* environment variables only
if variables are not set.
This allows to set custom PSEUDO_PREFIX and other pseudo
variables in order to use pseudo database from non-standard
locations.
Change-Id: I0bc1af5e521121d1f96d590cb6edb23cf0cb0b83
(From OE-Core rev: cd121c06e9de8951d507998be443f95f0edc246a)
Signed-off-by: Ed Bartosh <eduard.bartosh@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support for skipping the beginning of a file with the rawcopy
plugin.
(From OE-Core rev: 89db37c85ac0d0035dbeb9643d7802ca28681e76)
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The fsimage plugin allows to add an already existing filesystem image in
the partition layout.
(From OE-Core rev: b49e5af8c6ef0abaabce36e5e7d8ddc399e02f53)
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 0a6668f6e60b4195ff4163c00fc972bacdb27b4b still included some
debug and is not working properly as the new fstab is generated too
late.
(From OE-Core rev: eea80d25c0902bb16ed3425888857d3cc5486376)
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because we move the workdir when extracting source, then move the source
and delete the temporary workdir, you lose the indirection symlink
pointed to by the alternates file (which is created when the fetcher
clones it from DL_DIR with -s) and the resulting repository is broken.
In any case, for a source repo that the user may put their own changes
into, we can't really rely on a clone made with -s in case the
original goes away - because of cleanall, DL_DIR disappearing, etc. So
repack the repository so that it is a complete, non-shared clone after
unpacking.
(While I'm at it, add a test for devtool modify with a git recipe which
verifies that this works.)
(From OE-Core rev: dccdde4321c48a571677995a4e1dfc583e899cbe)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enable source extraction used by devtool extract / devtool modify -x for
recipes that use a shared workdir (e.g. the kernel and gcc).
(From OE-Core rev: 73a5bdc7921791b954ca717293e76c7e3091a19e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If S is outside of WORKDIR then we shouldn't try to get the relative
path in order to work out where the source subdirectory is as we do by
default.
(From OE-Core rev: 7392ecd559ef71241405c704a65da171ee216ca1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There wouldn't be any point to using these with an image recipe, so
disallow it.
(From OE-Core rev: 611c27182a6e52e159a1ce1b5bac054405c611d2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When updating git-based recipes, in a lot of cases what you want is to
push the changes to the repository and update SRCREV rather than to
apply patches within the recipe. Updating SRCREV is now the default
behaviour for recipes that fetch from git, but this can be overridden
in both directions using a new -m/--mode option.
(From OE-Core rev: 654792bb87610ee3569d02a85fa9ec071bf8ab6d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you want to be able to make use of libraries in conjunction with
devtool then we need to install them into the sysroot for other recipes
to use. Make it a configuration option in case it needs to be changed at
runtime.
(From OE-Core rev: 94f517ad8e55edfbe6f06afd963bcfeb849626ff)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you've added a new recipe, you want the output cleaned when you do
devtool reset, otherwise cruft from building the recipe may remain which
could interfere with future builds.
(From OE-Core rev: 664d1a7fe8f8288fabc582d00f6e36ab29496ec5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default behaviour is to build in a separate directory to the source,
however some projects can't be built this way, so add an option to do
that (or override the automatic behaviour in the case of modify).
(From OE-Core rev: cf094ed2f616a581eb07d78db4366c83a441fde5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Option was renamed in the setup code but not in the code that used it.
(From OE-Core rev: 4b4f2d4f2869d6d5d564cc1b2d733f41ab5a3b9b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the recent kernel staging changes, STAGING_KERNEL_DIR no longer
points to the kernel image, which can be found however in
DEPLOY_DIR_IMAGE. This updates find_artifacts() to look there
instead.
Fixes [YOCTO #7307].
(From OE-Core rev: 453d0a9823665870e273a37657d6e27fb788d72e)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the partition label option, when available, to label the filesystem.
(From OE-Core rev: 93e2de4f4b71775d70ac2ccb7e2d26ca95b96186)
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
btrfs emtpy partition creation is currently not working because of the
usage of the non existant variables rootfs ans extra_imagecmd. It also
as an incorrect size.
(From OE-Core rev: 2624f30dd2d2a8f7fd97117c77a4d6aa2ba6f1f9)
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
