This will allow setting the variable in oe-core such that it matches
S, which in turn will allow dropping S from almost all git:// fetching recipes,
and not having to set it in newly written ones.
(Bitbake rev: 378db0fdd95f8704fccd852452555bfddcad384d)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Since `ud.path` contains in that case the `PREMIRRORS` prefix path,
this change ensures that a correct symlink is set up.
(Bitbake rev: 37ed18e45aa17406162efc5ee3ddb2d6b33d07b9)
Signed-off-by: Stefan Koch <stefan-koch@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a tag contains slash, e.g., debian/5.22, then shallow clone
fails because it's using a wrong ref.
To reproduce the issue, add the following lines in local.conf:
BB_GIT_SHALLOW = "1"
BB_GENERATE_SHALLOW_TARBALLS = "1"
And then run 'bitbake debianutils -c fetch'.
What the original os.path.basename(ref) wanted to do is to remove
the strings such as refs/heads/. So we do it explitly to fix this
issue.
Fixes: [YOCTO #15862]
(Bitbake rev: c6d6999f1ed01e7445b8f177a888038edacf555c)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its not clear which exact git-lfs versions failed to work with bare
repositories, however git-lfs 2.13.2 which is shipped by Debian 10 (i.e.
the oldest supported distribution by scarthgap) shows no issue when
fetching into a bare repository. Switch to git-lfs fetch which in turn
eliminates issues seen when using the gitsm fetcher with submodules
utilizing lfs.
In these scenarios, fetching of LFS objects did not actually happen as
the gitsm fetcher parametrizes the to be fetched repositories with
`bareclone=1` which in turn means that the target revision was never
checked out (and therefore no LFS objects were fetched).
(Bitbake rev: 501d3317df5780a5b0e3c2562b26ed276c1dbe90)
Signed-off-by: Philip Lorenz <philip.lorenz@bmw.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its unclear why this function does not operate on the desired source
revision to begin with (which really should be the decider on whether a
particular source revision uses LFS or not). Simplify the decision logic
by always checking the `.gitattributes` file of the target revision.
(Bitbake rev: b3faa0ce5c0a6945f26b5b303a7f38c00d132397)
Signed-off-by: Philip Lorenz <philip.lorenz@bmw.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
So far, existence of `git-lfs` was only checked during unpacking. As the
binary is also used in earlier steps also check for its existence there.
Additionally, factor out the LFS existence check into a dedicated
function and call it wherever git-lfs is used for the first time.
(Bitbake rev: 5818367db9b261b7e07c347d38044e6cba8f9727)
Signed-off-by: Philip Lorenz <philip.lorenz@bmw.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There's no need to pass `name` when it is no longer used.
(Bitbake rev: b132d35dee643e270e3e6dd536dcc90334a0111c)
Signed-off-by: Philip Lorenz <philip.lorenz@bmw.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Correct typo Fash -> Fast.
With it also delete some trailing spaces which are unnecessary and
editors are trying to remove when changing anything in the file.
(Bitbake rev: b96040a0a066344527f0bc6ca4d09cda6b9d2f11)
Signed-off-by: Peter Marko <peter.marko@siemens.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Before fast shallow tarballs the shallow tarball with lfs worked only
if the original .../downloads/git2/... directory existed. Once it was
not there, do_unpack on shallow tarball without lfs files failed due to
disabled network.
It was fixed for fast shallow tarballs and this commit fixes the other
scenarios, too.
This can happen when such shallow tarball is put to mirror or if
someone does cleanup to reclaim disk space.
(Bitbake rev: 4e6fb31a88448cdacf4e9f84cf0a8a8035f84d63)
Signed-off-by: Peter Marko <peter.marko@siemens.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If SRCREV points at an annotated tag, the comparision code can fail
as the resolved tag might not be the same sha.
Handle this by also resolving the SRCREV. We only need to do this if
they don't match in the first place for a minor performance win.
Also add a test for this.
(Bitbake rev: 136c06e251de68ed64355ec6b47a522ff3a372e3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We used to use this for bare clones where a single git url could handle multiple
revisions (which implied multiple branches).
We don't use this any more and I doubt we'd want to go back to it. If we
remove it, we can simplfy the looping in the code which seems desireable.
This patch does change the warning for missing branch parameters to a
error. The message has hinted about that for long enough.
Some test cases are removed since they are no longer needed.
(Bitbake rev: 2515fbd10824005fa7f34e87706000c079920366)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we want to validate a tag when using shallow clones, we need to ensure
the tag is imported to the clone. Adding to extra_refs allows this to happen
ensuring tag validation in shallow clones works.
(Bitbake rev: 03945475886b8d31c7eccc80fe594ab5306bcf5d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently bitbake disallows tag parameters along with revision parameters.
This isn't great since quite often, we'd like to verify that a given revision
does match some tag. At the same time we don't want to or need to access
the network to verify this, which normally a tag would require.
Rework the code so that tag and revisions can both be specified together.
Verify that any tag specified matches the revision in use at unpack time.
This means we can start requiring people to put tags in git SRC_URIs
when revisions are used, making review a little easier that it isn't
some random revision.
The test that is dropped looks like a different test but the comment
is a copy and paste error. The SRCREV/rev mismatch test remains, this
removes the rev and tag set test.
(Bitbake rev: d591d7633fe8d739ec00395920e44910b0b77e27)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes a bug where escapes in the url path would not be properly
restored for the git commands in the git fetcher. For example, a
space which is encoded as '%20' was not properly encoded before the
clone command.
e.g.
SRC_URI="git://git.openembedded.org/bitbake%20example/bitbake;protocol=https"
resulted in
git clone 'https://git.openembedded.org/bitbake example/bitbake'
instead of
git clone 'https://git.openembedded.org/bitbake%20example/bitbake'
(Bitbake rev: be48024253b93215bb110cd1d05925e789ec9680)
Signed-off-by: Patrik Nordvall <patrik.nordvall95@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When `ud.shallow == 1`:
- Prefer an initial shallow clone over an initial full bare clone,
while still utilizing any already existing full bare clones.
- If the Git error "Server does not allow request for unadvertised object"
occurs, the initial full bare clone is fetched automatically.
This may happen if the Git server does not allow the request
or if the Git client has issues with this functionality,
especially with the Git client from Ubuntu 20.04.
This improves:
- Resolve timeout issues during initial clones on slow internet connections
by reducing the amount of data transferred.
- Eliminate the need to use an HTTPS tarball `SRC_URI`
to reduce data transfer.
- Allow SSH-based authentication (e.g. cert and agent-based) when
using non-public repos, so additional HTTPS tokens may not be required.
(Bitbake rev: 457288b2fda86fd00cdcaefac616129b0029e1f9)
Signed-off-by: Stefan Koch <stefan-koch@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The file may be a symlink when mirror from local disk, and the symlink will be
broken when the linked file is removed, use os.path.islink() to check and
remove the broken symlink.
(Bitbake rev: d0deb5fe6e7a84b07b49ef685b209729d2fdc780)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
BB_GIT_SHALLOW = "1"
BB_GENERATE_SHALLOW_TARBALLS = "1"
$ bitbake utfcpp -cfetch && bitbake utfcpp -ccleanall
The downloads/gitsmshallow_github.com.nemtrif.*.tar.gz won't be cleaned without
this fix.
(Bitbake rev: bab7a8970a0237a9d24217685a595e76a1336c07)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The pipes module is removed in python 3.13. It was already using the
quote function from shlex so use that directly instead.
The module already imports shlex too so it is an easy substitution.
(Bitbake rev: 9ef4f2a30127455562e38e869793a723eed6c07c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enforce the default remote name to "origin", as assumed in numerous
places.
This prevents build failures in case the system/user configuration sets
this to a different value.
(Bitbake rev: 1d7360031164f04887c792fb0b2dd86c6ccfcc23)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch can make the following settings much more faster:
BB_GIT_SHALLOW = "1"
BB_GENERATE_MIRROR_TARBALLS = "1"
* The previous implementation was:
- Make a full clone for the repo from local ud.clonedir
- Use git-make-shallow to remove unneeded revs
It was very slow for recipes which have a lot of SRC_URIs, for example
vulkan-samples and docker-compose, the docker-compose can't be done after 5
hours.
$ bitbake vulkan-samples -cfetch
Before: 12 minutes
Now: 2 minutes
$ bitbake docker-compose -cfetch
Before: More than 300 minutes
Now: 15 minutes
* The patch uses git shallow fetch to fetch the repo from local
ud.clonedir:
- For BB_GIT_SHALLOW_DEPTH: git fetch --depth <depth> rev
- For BB_GIT_SHALLOW_REVS: git fetch --shallow-exclude=<revs> rev
Then the git repo will be shallow, and git-make-shallow is not needed any
more.
And git shallow fetch will download less commits than before since it doesn't
need "rev^" to parse the dependencies, the previous code always need 'rev^'.
(Bitbake rev: a5a569c075224fe41707cfa9123c442d1fda2fbf)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Git uses a lock file to prevent concurrent modifications to the global
config, so if unpack tasks for different recipes try to run "git lfs
install" simultaneously the operation can fail:
error: could not lock config file /home/build/.gitconfig: File exists exit status 255
Run `git lfs install --force` to reset Git configuration.
Adding "--local" sets the smudge and clean filters in the local
repository's config instead of modifying the user's global config.
(Bitbake rev: 328ca4de8422be514fa0d0c9e3cfd36bb9d3e9a7)
Signed-off-by: Derek Erdmann <derek.erdmann@sonos.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
FIXES [YOCTO #15404]
When using git fetcher on a repo with parentheses in its URL, the
invocation of the git clone command will fail. The clone directory
is not quoted thus the shell will return an error and won't execute
the command.
(Bitbake rev: b5624ee564)
Cc: Philippe Rivest <privest@genetec.com>
(Bitbake rev: 12f9738577934ad7c99f0770f1392a9d6050e7d6)
Signed-off-by: Philippe Rivest <technophil98@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently when git fetches fail, it destroys all the existing local clone data.
For large repositories this can introduce long build delays when for example,
you just typo'd the git revision hash.
The git fetcher should be able to recover most directories so when the fetch is
for a git repo, avoid removing things unless clean is explicitly called
(e.g. a -c cleanall task).
(Bitbake rev: 1b3cd039fe19b24bd4be9a0202a98cdcbb0e9443)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current implementation only performs a git lfs fetch alongside of a
regular git fetch. This causes issues when the downloaded revision is
already part of the fetched repository (e.g. because of moving back in
history or the updated revision already being part of the repository at
the time of the initial clone).
Fix this by explicitly checking whether the required LFS objects are
available in the downloade directory before confirming that a downloaded
repository is up-to-date.
This issue previously went unnoticed as git lfs would silently fetch the
missing objects during the `unpack` task. With network isolation turned
on, this no longer works, and unpacking fails.
(Bitbake rev: cfae1556bf671acec119a6c8bbc4b667a856b9ae)
Signed-off-by: Philip Lorenz <philip.lorenz@bmw.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Before, everything up to the last slash was removed when extracting the
names of the tags. This would lead to that a tag such as "agent/11.0.0"
would be incorrectly identified as "11.0.0", which would then be treated
as a correct version matching "^(?P<pver>\d+(\.\d+)+)".
(Bitbake rev: 8b21024b9966d5158ac4a77e87ffb935c2a57764)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is mostly preparations for the next commit.
(Bitbake rev: dcd2abfde55cc59d9869a7c97620b6fc30a52047)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The purpose of ensuring 'incremental fetch' is not easy to see from
the codes. So add comments to explain this.
(Bitbake rev: 8b890b87e30cd05ec92ed71ee3691a47b4d77253)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For gitsm recipes, it's possible that some URL is used more than once.
e.g.,
A -> B:rev1 (B is a submodule of A)
A -> C (C is a submodule of A)
C -> B:rev2 (B is a submodule of C)
A anc C are both using B as submodules, but on different revs.
Now if we have:
B:rev1 -> D
B:rev2 -> E
Then, the mirror will not be fully used.
Say we have all repo mirrors for A, B, C, D, E, then in theory it's not
necessary to reach out to any network for downloading. But it's not the
case. After downloading B(rev1) and its submodule D from mirrors, the fetch
process continues to download C, thus B(rev2) and E. Now it finds that B
needs an update because its submodule E needs an update. Of course this is
true because E is not downloaded yet. Now the problem comes to whether to
use mirror or not. The git.py defines try_premirror to return 'False' when
the ud.clonedir exists. As B has been cloned, the ud.clonedir exists and
try_mirror returns False, resulting in not using mirror and going to upstream
directly.
We can see that the mirrors are not fully used. This is usually not problem,
as the cost is only some network download. But in case the following two
settings are there, we get errors.
BB_NO_NETWORK = "0"
BB_ALLOWED_NETWORKS = "*.some.allowed.domain"
In such case, the gitsm recipe A will fail to fetch. Note that all contents
that A needs are in mirrors and now it's failing to fetch. This is unexpected.
Note that the different revs of the same repo in gitsm recipe is not the only
way to reveal this problem. For example, there might be a recipe call B that
uses B:rev3. Check the protobuf and grpc recipes as an example.
For now, we can use the following steps to reproduce this issue. To be clear,
the grpc recipe in meta-oe is now 1.60.0.
1. Add in local.conf:
DL_DIR = "${TOPDIR}/downloads-premirror"
bitbake grpc -c fetch
2. Comment out the DL_DIR setting in local.conf and add the following lines:
PREMIRRORS:append = " \
git://.*/.* git://${TOPDIR}/downloads-premirror/git2/MIRRORNAME;protocol=file \n \
gitsm://.*/.* gitsm://${TOPDIR}/downloads-premirror/git2/MIRRORNAME;protocol=file \n \
"
3. Set BB_NO_NETWORK = "1" and then 'bitbake grpc -c fetch'.
This command succeeds and this shows that the premirror holds everything we need.
4. Add the following lines and then 'bitbake grpc -c fetch'.
BB_NO_NETWORK = "0"
BB_ALLOWED_NETWORKS = "*.some.domain"
After step 4, the error message is as below:
ERROR: grpc-1.60.0-r0 do_fetch: The URL: 'gitsm://github.com/protocolbuffers/protobuf.git;protocol=https;name=third_party/protobuf;subpath=third_party/protobuf;nobranch=1;lfs=True;bareclone=1;nobranch=1' is not trusted and cannot be used
This patch fixes this problem by handling this corner case, that is, if the URL is
not trusted from the settings of BB_NO_NETWORK and BB_ALLOWED_NETWORKS, then we should
try premirrors because trying to reach upstream is destined to fail.
(Bitbake rev: e1be272ad105b47d3131b77168d9172386993fcb)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the issue with using of (pre)mirror in case if clonedir exists but
outdated.
Previous version of the code fetched new mirror content into FETCH_HEAD
instead of branch which caused refetch from the upstream. Add new remote
add fetch from it instead so the ref can be found by "_contains_ref"
Fixes [Yocto #15369]
(Bitbake rev: 69588e2a5c7c200e47b02b2391498dcb72388bd2)
Signed-off-by: Pavel Zhukov <pavel@zhukoff.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When git is configured with safe.bareRepository=explicit [1], the
bitbake git fetcher fails miserably. LWN has an article about the
problem that this configuration option addresses and why it is useful
in [2].
It also seems that it is being rolled out in some environments as a
default for users.
In order to allow having this configuration turned on for a user's
environment in general, the fetcher has to be tought to use --git-dir=
for all relevent git operations.
The alternative, implemented here, is to forcibly turn off that option
for all git operations. In the future, we could look into converting
these to using the --git-dir= command line argument instead.
While at it, fix one open-coded invocation of git that wasn't using
ud.basecmd
Link: https://git.kernel.org/pub/scm/git/git.git/tree/Documentation/config/safe.txt#n1 [1]
Link: https://lwn.net/Articles/892755/ [2]
(Bitbake rev: 5f3b1d8dc9ee70e707536bd75ee845b547440c97)
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Docstring for git fetcher is missing destsuffix and subpath parameters,
so add them
(Bitbake rev: 7cea6c2efefbb0f789f654c04a61d9ba770c148b)
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When downloading a Git repository containing an LFS, the Git hooks
are not always initialized correctly to perform the download. This
change updates the Git downloader to run the "git lfs install" command
in order to "smudge" the LFS files. The tests have also been updated
to do checks for situations in which git lfs is not installed, as
the application was required to be installed for any of the tests
to run previously.
The Git LFS functionality was working to some degree previously,
but this change also updates the fetcher to allow LFS downloads for
nobranch SRC_URIs.
(Bitbake rev: 05f8529fb439db93d85a892704b6f2f0ac0c9217)
Signed-off-by: Desone Burns II <dburns@seegrid.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Pre-fetching of LFS blobs now also works if a destsuffix parameter is
supplied.
This also fixes issues with Yocto Kirkstone (and newer) builds, where
fetching the LFS blobs is retried unsuccessfully during do_unpack, as
network access is blocked for any task other than do_fetch.
(Bitbake rev: e411dc07d032be6811d0393c50a06fc28e669b24)
Signed-off-by: Ragesh Nair <ragesh.nair@duagon.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds an API to bb.fetch2 to enable users to plug in an unpack
tracer that can trace each source file back to its corresponding
upstream source url, even when multiple upstream sources are combined
together in the same unpack directory. This may be required for software
composition analysis, license compliance, and detailed SBoM generation.
This patch provides only the needed hooks in bb.fetch2 code and a dummy
abstract class defining the API; users may load their own unpack tracer
class by setting the BB_UNPACK_TRACER_CLASS config parameter.
(Bitbake rev: 05051152cc42acc52bcf9af9a696f632fac4307f)
Signed-off-by: Alberto Pianon <alberto@pianon.eu>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using path prefixes to check if the git directory is a descendant of the
clone directory can be easily confused with symlinkes and bind mounts,
causing directories to be deleted unnecessarily. Instead, use
bb.utils.path_is_descendant() which is immune to the these sorts of
problems.
(Bitbake rev: b4d7a0546630620480b7fee159b84c3506e941a2)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no reason to have the else clause in this try block, as it can
be moved into the try block, which is clearer.
(Bitbake rev: 5625849e9327fc71a38eea00d4506f80abc11bc6)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the clone target directory exists and is a valid git repo, but the
git directory is not a child, it needs to be erased and re-cloned. One
example of how this can happen is if a clone creates the directory, but
then fails to actual clone and make it a git repository. This left-over
directory can be particularly problematic if the download directory is a
descent of some top layer git repo (e.g. the default with poky), as the
commands that operate on the remote later will then mangle the layers
git repository instead of the download git repo.
(Bitbake rev: 2117db3146ce38bb4a6e2df40b6cd2ab11b514d5)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "git clone /path/to/git/objects_symlink" couldn't work after the following
change:
6f054f9fb3
But repo command manages the git repo as symlinks, so check whether the objects
is an symlink to fix the problem:
* Nothing is changed if git/objects is not a symlink
* Use "git clone file://" when git/objects is a symlink
(Bitbake rev: a0d8108eba8d542707740d00c66c1c5f5b963f18)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bitbake expects a consistent metadata environment when it parses. There
are plenty of ways you can set a recipe to autorev at a point where parts
of the fetcher have already been triggered leading to obsure bugs which
I struggled to debug, let alone anyone not familar with the code.
If anyone is running into the message from the commit, the issue is
likely one of timing. Keep in mind that the anonymous python code
in base.bbclass will expand variables like FILESPATH, WORKDIR and others
which contain PV. The recipe needs to be set to AUTOREV before that
anonymous python runs.
In particular, that means you can't set SRCREV = "${AUTOREV}" in other
anonymous python, it needs to happen earlier.
(Bitbake rev: 4d9ec332d5bfc8b60b54f8ec2a17d34e35aa903a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For readability of following patches, rename this internal variable to
allow for others in a similar format.
(Bitbake rev: 450b4a00895ed1f9396a8ff859dc1cc0eccc838f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to using mkdtemp instead of TemporaryDirectory we needed to
manually cleanup the directory in a try finally block.
With tempfile.TemporaryDirectory we can handle the cleanup with
a "with" statement and not need to manually clean up oursevels.
(Bitbake rev: 36a231d2a45e7c87172196538d18ded81a234774)
Signed-off-by: Paulo Neves <paulo@myneves.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
branchname was set but never used in the context of _contains_lfs
method.
(Bitbake rev: a64ec64c2faf1ac6ce995cdd4e311d8be6046155)
Signed-off-by: Paulo Neves <paulo@myneves.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Namespace in this context means a branch, a tag, etc., clarify
it in the description. Also, fix a typo "a any", replace with
plain "any".
This patch is based of feedback on new applied patch
d32e5b0e ("fetch2/git: Prevent git fetcher from fetching gitlab repository metadata")
(Bitbake rev: b4999425c812b25cb359d5163d11e3c1b030dc28)
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bitbake git fetcher currently fetches 'refs/*:refs/*', i.e. every
single object in the remote repository. This works poorly with gitlab
and github, which use the remote git repository to track its metadata
like merge requests, CI pipelines and such.
Specifically, gitlab generates refs/merge-requests/*, refs/pipelines/*
and refs/keep-around/* and they all contain massive amount of data that
are useless for the bitbake build purposes. The amount of useless data
can in fact be so massive (e.g. with FDO mesa.git repository) that some
proxies may outright terminate the 'git fetch' connection, and make it
appear as if bitbake got stuck on 'git fetch' with no output.
To avoid fetching all these useless metadata, tweak the git fetcher such
that it only fetches refs/heads/* and refs/tags/* . Avoid using negative
refspecs as those are only available in new git versions.
Per feedback on the ML, Gerrit may push commits outsides of branches or
tags during CI runs, which currently works with the 'nobranch=1' fetcher
parameter. To retain this functionality, keep fetching everything in case
the 'nobranch=1' is present. This still avoids fetching massive amount of
data in the common case, since 'nobranch=1' is rare. Update 'nobranch'
documentation.
Reviewed-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
(Bitbake rev: d32e5b0ec2ab85ffad7e56ac5b3160860b732556)
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This git configuration variable is deprecated in 2.36.0 onwards, so git
warns in the logs for every git call.
Luckily the default value has always been false[1], so we can just remove
this.
[ YOCTO #14939 ]
[1] aafe9fbaf4
(Bitbake rev: 8ad310633e0c5d5593631c1196cbdde30147efce)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The condition will always evaluate to true and
thus is redundant.
(Bitbake rev: be1ee681e8a566564549068dcf90c95c36544815)
Signed-off-by: Paulo Neves <ptsneves@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* in recipe with 17 git repos in SRC_URI I've accidentally pasted one SRCREV to
be one character shorter and because fetcher uses:
if not ud.revisions[name] or len(ud.revisions[name]) != 40 or (False in [c in "abcdef0123456789" for c in ud.revisions[name]]):
to decide which SRCREV values are fixed SRCREVs this one was
considered as tag or branch name, because it was only 39 chars long
The original error message wasn't very helpful as it doesn't show
which repo or which SRCREV was considered missing:
do_fetch: Bitbake Fetcher Error: FetchError("Recipe uses a floating tag/branch without a fixed SRCREV yet doesn't call bb.fetch2.get_srcrev() (use SRCPV in PV for OE).", None)
with SRCPV included in PV as error recomments it's a bit better:
bb.data_smart.ExpansionError: Failure expanding variable SRCPV, expression was ${@bb.fetch2.get_srcrev(d)} which triggered exception FetchError: Fetcher failure: Unable to resolve '0a92994d729ff76a58f692d3028ca1b64b145d9' in upstream git repository in git ls-remote output for github.com/Maratyszcza/FP16
The variable dependency chain for the failure is: SRCPV -> PV -> WORKDIR -> T
with this change the first error will read:
do_fetch: Bitbake Fetcher Error: FetchError("Recipe uses a floating tag/branch '0a92994d729ff76a58f692d3028ca1b64b145d9' for repo 'github.com/Maratyszcza/FP16' without a fixed SRCREV yet doesn't call bb.fetch2.get_srcrev() (use SRCPV in PV for OE).", None)
(Bitbake rev: 04dc17bef9b762cef9eecdf91c9f37738d8ae44d)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This should fix [Yocto 13353] and related to [Yocto 13233] as well.
Previously if git repo mirror has been updated in between of two builds
fetcher of the second build didn't try updated mirror but switched to
git clone from upstream instead. This is problem for offline builds.
Fix this to raise MirrorException if BB_FETCH_PREMIRRORONLY has been
specified by the mirror doesn't contain SRC_REV.
[YOCTO #13353]
[YOCTO #13233]
(Bitbake rev: b47ecab3e3aad5c5c376ec023aa82a51aa0f3b86)
Signed-off-by: Pavel Zhukov <pavel.zhukov@huawei.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't have less in HOSTTOOLS in OE and this can confuse git. Force the
pager to cat to be consistent and minimal everywhere.
(Bitbake rev: d3d406e8552fdd865dc58b419a84411736475ad2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
