After introducing the DISTRO_LATEST_TAG and DISTRO_REL_LATEST_TAG
macros, use them in links that currently use DISTRO/DISTRO_REL_TAG. When
building for the tip of a branch, this will replace the current A.B.999
in links to the latest existing tag.
The links were found across the documentation by running 'grep -r
"http.*5\.2\.999"' inside the _build/html output after building the
docs.
[YOCTO #14802]
(From yocto-docs rev: 29be069ebbf2c55d72fc51d99ed5a558af37c05e)
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #13417]
devtool is not directly tied to the Extensible SDK anymore, and
instructions in there can be split and added to the development manual.
This patch is a simple bulk move, except for the following:
- Intro added to the devtool.rst document (mostly copy-pasted from the
devtool quick reference in the ref-manual).
- Figures renamed to remove "sdk-" from filenames.
- References to sdk-manual/extensible replaced by dev-manual/devtool.
Reported-By: Paul Eggleton <bluelightning@bluelightning.org>
(From yocto-docs rev: 044d3185b858fce1febcfe3a6834b883f9a598fa)
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The devtool ide-sdk section is reformulated to be independent of the
eSDK installer. In fact, ide-sdk does not even support the execution
of an installer-based setup.
This reformulation is also a preparation for moving the devtool
documentation to a dedicated devtool section which is independent from
the eSDK documentation.
It should be clarified that devtool ide-sdk starts the SDK directly
from the bitbake environment. It is therefore an alternative to
bitbake -c populate_sdk_ext and installing an SDK installer.
A warning is added that explains some workarounds for some nasty
behavior of VSCode when running it in a bitbake environment.
(From yocto-docs rev: 287817f33688d61f7a71c056bfa5c645edb4fc4e)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Reviewed-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a fix for 22dc5b3be3b1fbdb9447999b71f79db055271826, which has
completely replaced debug-tweaks. But in the context of devtool ide-sdk
and the comment in the example, the post-install-logging-image feature
doesn't really make much sense. Therefore, remove it.
(From yocto-docs rev: 148191460627241cbd0c42583140f114c78cc94c)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Reviewed-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We no longer provide this feature, so remove documentation for it. In
most cases, we can replace occurrences of "debug-tweaks" by
"allow-empty-password empty-root-password allow-root-login
post-install-logging" to achieve what this feature previously enabled.
Subtle, but the default local.conf does not include
post-install-logging, so in parts where there is mention of the default
local.conf file, adjust the documentation to only mention the first
three above.
In the intro manual, instead of providing instructions that replace
EXTRA_IMAGE_FEATURES entirely, provide ones that append
EXTRA_IMAGE_FEATURES.
(From yocto-docs rev: f0efd4c7df91863304b92514664bdd1fa62b1fbb)
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
They were separated in
https://git.yoctoproject.org/poky/commit/?id=63e53fb8b60d38315015844bd3357fa1649cd639
(From yocto-docs rev: b880ac9498764027de435103d493f34adf68dc13)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Reviewed-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cover the new devtool ide plugin in the extensible sdk section.
Many thanks to Enguerrand de Ribaucourt for his re-view and
contributions.
(From yocto-docs rev: d318cc41e0600ca8e18bc6789cac414ae0226a07)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Take advantage of this edit to also fix alignment
issues in the sources.
(From yocto-docs rev: 318261d8ea91c2373709a9c1e82304ab7e9e9a3b)
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Replacing
:ref:`bitbake:bitbake-user-manual/...`
by :ref:`bitbake-user-manual/...`
Adding "bitbake:" as a prefix is not necessary
as there is no naming conflict between the YP
and the BitBake manuals (all documents are in
"bitbake-user-manual/")
- Explaining the rules in the README file
- When necessary, fixing line length in the modified paragraphs.
(From yocto-docs rev: d80b31705450cfb98d217ea44ba2edace2d64095)
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that .bbclass is removed from class section titles.
We can now have, for example, :ref:`ref-classes-insane`
instead of :ref:`insane <ref-classes-insane>`.
Then, when necessary, rework paragraphs so that they
have lines of even length, not exceeding 80 characters.
(From yocto-docs rev: e76190e3be78c1e483bec0469f1e437dbf8f3791)
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Suggested-by: Quentin Schulz <foss+yocto@0leil.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using "#." instead of "1.", "2.", "3.", etc.
(From yocto-docs rev: 11c2585acd0fa6c330702af2359ce5a9e47cde1f)
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Reported-by: Quentin Schulz <foss+yocto@0leil.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixing double colons appearing alone on a line, while
they could be put at the end of the previous line.
Sometimes placing a note after the quoted text
to avoid such a situation. It's more natural too
not to have a note between the introduction text
and the quoted section.
(From yocto-docs rev: fb054622f5119444eb947fe580253f37e0d872c6)
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A 500 KB source file is always harder to manage,
and can have section title conflicts.
So, the "Common Tasks" document is gone and all
its constituents are moved up one level.
You now have 40 chapters in the Development Tasks Manual.
(From yocto-docs rev: 8a45bc469411410020b8e688c137395fcaf3761b)
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace instances of "Build Directory" and "build directory"
(when applicable) by :term:`Build Directory` as already
done in most places.
Doing this, fix the indentation of the paragraphs with
this term.
(From yocto-docs rev: dce50679242d39f133e0cde5c8483b5e69f3eb54)
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix some hyphens being improperly used as em dashes.
See https://www.grammarly.com/blog/hyphens-and-dashes/
Using em dashes may also allow Sphinx to hyphenate
and break lines in the best way.
Note that the first character after an em dash not
supposed to be capitalized, unless a specific
rule applies, typically when what follows is a proper noun.
Fix a few misuses of parentheses in following text.
(From yocto-docs rev: 5918f019f63f6e820b1168f4cc001faa1d1cdc6f)
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Better for EPUB output in particular
- Make some diagrams wider when necessary
- Remove ":align: center" when we have ":width: 100%"
- Update the standards.md files to mention this
(From yocto-docs rev: 848ba7bd8984cc3f4bf6b818259865011cde0476)
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated with openembedded-core/scripts/contrib/convert-overrides.py
(From yocto-docs rev: 39cf6b2eb063815a3e2bf7a71ffd1fd6351cc594)
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replacing ":ref:`section name<bitbake:bitbake-user-manual/bitbake-user-manual-<section>:section name>`"
by ":ref:`bitbake:bitbake-user-manual/bitbake-user-manual-<section>:section name`"
when the reference description is the same as the section name.
In this case, that's unnecessary to repeat the section name in the description part.
(From yocto-docs rev: 6a1a590f9ef77dc8842ea5945661135992eb94e1)
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Reviewed-by: Quentin Schulz <foss@0leil.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a variable has a glossary entry and some rST files write about those
variables, it's better to point to the glossary entry instead of just
highlighting it by surrounding it with two tick quotes.
This was automated by the following python script:
"""
import re
from pathlib import Path
with open('objects.inv.txt', 'r') as f:
objects = f.readlines()
with open('bitbake-objects.inv.txt', 'r') as f:
objects = objects + f.readlines()
re_term = re.compile(r'variables.html#term-([A-Z_0-9]*)')
terms = []
for obj in objects:
match = re_term.search(obj)
if match and match.group(1):
terms.append(match.group(1))
for rst in Path('.').rglob('*.rst'):
with open(rst, 'r') as f:
content = "".joing(f.readlines())
for term in terms:
content = re.sub(r'``({})``(?!.*\s*[~-]+)'.format(term), r':term:`\1`', content)
with open(rst, 'w') as f:
f.write(content)
"""
(From yocto-docs rev: ba49d9babfcb84bc5c26a68c8c3880a1d9c236d3)
Signed-off-by: Quentin Schulz <foss@0leil.net>
Reviewed-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Reviewed-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This simplifies paragraphs ending with a colon and followed
by code insertion.
Automatically substituted through the command:
sed -i -z "s/:\n\s*::/::/g" file.rst
This generates identical HTML output.
(From yocto-docs rev: 28e2192a7c12d64b68061138a9f6c796453eebb1)
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Anchor links are treated by Sphinx as external links and are not checked
during build, meaning it is impossible to know if a link becomes broken or
not.
As a matter of fact, most of the anchor links replaced in this commit
were actually broken.
The README now states that anchor links are forbidden so that there's no
need to go through such a change later on.
(From yocto-docs rev: de9e4d26b46afa3c79137d07529a74553400d2e0)
Signed-off-by: Quentin Schulz <foss@0leil.net>
Reviewed-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the "Yocto Project Quick Build" instructions
(https://docs.yoctoproject.org/brief-yoctoprojectqs/index.html#)
there is an inconsistency that impacts several documents...
People are first instructed to clone the poky git repository, but not
mentioning from which directory. Then, it's consistent to instruct
people to run "cd poky/".
However, later in the instructions, readers are instructed to run "cd
~/poky", which assumes that cloning poky was done from the home
directory. Many other places in the documentation make such an assumption.
This change fixes this, and makes no assumption on where people
have chosen to store their data, in particular where they cloned
the "poky" repository.
This also fixes a few whitespace issues.
(From yocto-docs rev: fd4e365c85df212d7ed70fc1abb3657a4a88b294)
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
poky.yaml references are only replaced in files if they are prefixed by
& and suffixed by ;.
Let's fix the missing surrounding characters.
(From yocto-docs rev: 7ee4ba7a27acd87d8c728639d1b053d2e26c6e58)
Signed-off-by: Quentin Schulz <foss@0leil.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All filenames duplicate the 'manual name', which is not needed, and
make all references longer than they should. Rename all files to be as
consise as possible, and fix all references
(From yocto-docs rev: bd8c0f7fc09a39a8bbde1c05b51693955738e148)
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
