Allow the '+' symbol as a valid character in filenames listed in the
IMAGE_EFI_BOOT_FILES variable.
The '+' symbol might be used to support boot counting for boot entries,
as described in the UAPI Boot Loader Specification [1]:
The boot counting data is stored in the name of the boot loader entry.
A boot loader entry file name may contain a plus (+) followed by a
number. This may optionally be followed by a minus (-)
followed by a second number. The dot (.) and file name suffix
(conf or efi) must immediately follow.
Boot counting is enabled for entries which match this pattern.
Example:
IMAGE_EFI_BOOT_FILES:append = " entry.conf;loader/entries/entry+3.conf"
[1] https://uapi-group.org/specifications/specs/boot_loader_specification/#boot-counting
(From OE-Core rev: 3f25822281eb9423ff86105eaebb0bed48663648)
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently WIC is unable to generate images that requires a sector
size different of 512. Add WIC_SECTOR_SIZE variable to handle
the sector size of 4096 for UFS.
For "wic ls" command modify get_partitions() to support WIC_SECTOR_SIZE.
(From OE-Core rev: 2255f28b579bc5db4138bcacbb829661ae0ee721)
Signed-off-by: Vince Chang <vince_chang@aspeedtech.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove custom wic plugin implementation and use systemd ukify reference
implementation when generating UKI images. Fail if users still have
create-unified-kernel-image in wic image config. uki.bbclass use is
detected from IMAGE_CLASSES variable ("inherit uki" in image
recipe) so export that to wic plugins.
If UKI is used, then only generate a minimal loader config for
systemd-boot which basically just sets a timeout. Also set 5 second
timeout by default instead of failing if wic bootloader config is
missing. Boot menu is generated at runtime based on UKI binaries
found from ESP partition.
(From OE-Core rev: 725fed6ea40c7443b5e0e69dc1dd9c38ac814c56)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Keep timestamps etc to help build reproducibility.
Add prints to see what is being copied to ESP partition.
(From OE-Core rev: cedcd25c5e3cd002dd34651c182193731d7c964b)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, if we specify a symbolic link in --exclude-path option,
we will get the following error in do_image_wic:
ERROR: --exclude-path: Must point inside the rootfs: usr/bin/hello.link
This is because it uses os.path.realpath to eliminate symbolic links. To
exclude symbolic links, use os.path.abspath instead of os.path.realpath.
(From OE-Core rev: 42e829ac1e9d74646b6dfb327b18b15f6b0df60b)
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Break out the code that parse IMAGE_BOOT_FILES to a common library.
(From OE-Core rev: 1e07fe51bdb24070308c85e83df0b80ab9f83cea)
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Konrad Weihmann <kweihmann@outlook.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we check for empty variables, it does not make sense to print their
content in case they are empty.
Additionally, the error message in the 'kernel' check attempted to print
the wrong variable ('target') which was not even defined, yet.
Also, raising WicError doesn't require an extra newline.
(From OE-Core rev: f31cf475d0235f42d73aeec07694f79b9937fd76)
Signed-off-by: Enrico Jörns <ejo@pengutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
--_000_PH7PR17MB61307CB6690EC00DEB4ED9B39C0F2PH7PR17MB6130namp_
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
This patch adds a missing "%s" format in a logger.error call. Without
this addition the logger itself would error out and not print a useful
message.
(From OE-Core rev: 2c892e5dd9ba72a51c0a8fb851599cc2dc3a8b5c)
Signed-off-by: John Ripple <john.ripple@keysight.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a generic functionality that takes a set of files and create a
boot parition based on IMAGE_BOOT_FILES var, allow to sepcify the
variable name so a BSP plugin can extend this and re-use the
functionality.
(From OE-Core rev: 3a2339455be29a6ff65c8c5f6865a4cd35dd7f63)
Signed-off-by: Anibal Limon <anibal@limonsoftware.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
GPT based disks have a disk guid apart from the 32-bit disk identifier.
This commit implements reproducible disk guid by using SOURCE_DATE_EPOCH (if available) value as a random seed
(From OE-Core rev: 150e079589e207fe174d2dceb40cd8f3d3972c5a)
Signed-off-by: Adithya Balakumar <Adithya.Balakumar@toshiba-tsip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds features to explicitly write zeros to the start of the
partition. This is useful to overwrite old content like
filesystem signatures which may be re-recognized otherwise.
The new features can be enabled with
'--soucreparams="[fill|size=<N>[S|s|K|k|M|G]][,][bs=<N>[S|s|K|k|M|G]]"'
Conflicting or missing options throw errors.
The features are:
- fill
Fill the entire partition with zeros. Requires '--fixed-size' option
to be set.
- size=<N>[S|s|K|k|M|G]
Set the first N bytes of the partition to zero. Default unit is 'K'.
- bs=<N>[S|s|K|k|M|G]
Write at most N bytes at a time during source file creation.
Defaults to '1M'. Default unit is 'K'.
(From OE-Core rev: d19d4529e7a2056caeb526fed980cc1df19a5f6e)
Signed-off-by: Malte Schmidt <malte.schmidt@weidmueller.com>
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The issue with installing the kernel image to both rootfs
and boot partition is that some systems rely on the kernel image in
rootfs and not in the boot partition.
This leads to duplication of the kernel image, which can cause
unnecessary storage usage.
This patch provides a solution to the problem by adding a new
parameter "install-kernel-into-boot-dir" to the wic kickstart file.
If this parameter is set to 'true', the plugin will install the
kernel image to the boot partition. If the parameter is set to
'false', the plugin will skip installing the kernel image, avoiding
duplication.
(From OE-Core rev: d3599afe5f604ea5afd9411e114934dcb52b2d48)
Signed-off-by: Kareem Zarka <kareem.zarka@huawei.com>
Signed-off-by: Christian Taedcke <christian.taedcke@weidmueller.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Debug message about using custom configuration file includes file name
with incorrect extension. Correct file name to "extlinux.conf".
(From OE-Core rev: dd63e1520454b2d53a48b72eaae126059af9809b)
Signed-off-by: Daniel Semkowicz <dse@thaumatec.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support for formatting a disk with a hybrid MBR & GPT partition
scheme. In this scheme, the primary partitioning method is GPT, but a
valid MBR header is also written than can point to a subset of the GPT
partitions on the disk (any partitions marked with the `--mbr` flag will
be included in this MBR). The primary purpose of this method is to allow
for SoCs that can only find a bootloader in an MBR partition to use GPT
once the bootloader is running. As an example, older versions of the
Raspberry Pi firmware can only parse MBR partitions to find a kernel (or
other bootloader like u-boot), but once those have booted GPT partitions
can be used.
In addition to the partitions annotated with the `--mbr`, a "protective"
GPT partition of type 0xEE is added, as the existence of such a
partition is the indication to tooling that this a hybrid MBR and that
the GPT partition table should be parsed instead.
(From OE-Core rev: e50e4c2a5ada6947b3503ca4d8e9c30d359e8a5d)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Section VMA's are currently hardcoded. This doesn't work anymore starting
with systemd-boot v254.
Follow the actually solution to this which is documented here:
https://wiki.archlinux.org/title/Unified_kernel_image#Manually
This is also used by dracut. Later on, we may want to switch to ukify
instead but this is not ready yet.
(From OE-Core rev: 3abf99a6c6bde2fb8770f54dba609b35f6c6ee5a)
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I've encountered issues reproducing initramfs and UKI image builds,
which will be fixed with this patch.
1. initramfs
There's a symbolic link to /sbin/init, which is appended to the cpio archive after creation.
The links timestamp needs to be static and the cpio append command needs the '--reproducible' flag to produce deterministic outcomes.
2. Unified Kernel Image
'--preserve-dates' is required for a static 'Time/Date' entry.
I've added '--enable-deterministic-archives' although in my case this
didn't change anything.
(From OE-Core rev: fd027729bafb4e085ba0949e38e724f3a8cad102)
Signed-off-by: Frieder Paape <frieder@konvera.io>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add argument --hidden to avoid MS Windows prompting to format
partition after flashing to a USB stick, SD card on another media.
Set Bit 0 (RequiredPartition) to mark that the partition is
required for the platform to function on GUID Partition Table
(GPT).
The new argument simplifies setting RequiredPartition on GPT
through a WKS file and the default imager plugin. Otherwise,
without this feature, to achieve the same result a new imager
plugin has to be implemented and set in WIC_CREATE_EXTRA_ARGS.
(From OE-Core rev: 7a111ff58d7390b79e2e63c8059f6c25f40f8977)
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use appropriate kernel image name instead of hard-coded vmlinuz for bootimg-pcbios plugin.
(From OE-Core rev: 8d9f00ba456fe76e0f4ef0e68ec64fc538c90d89)
Signed-off-by: Sergei Zhmylev <s.zhmylev@yadro.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a bit of a compatibility issue more than anything. Some devices
get upset if the FAT file system contains less blocks than the
partition.
The fixed-size argument is currently respected by the partition creation
step but not by the file system creation step. Let's make it so the file
system respects this value as well.
(From OE-Core rev: 38e1a235f5eceade7c871f96dc97f6c384384c7b)
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
So far part.label has been used to define GPT partition label even if
part.part_name was defined.
Fix the code to use part.part_name whenever available, as it makes sense
to have a GPT partition label which is different from the contained
filesystem label.
(From OE-Core rev: 7704d5fc36eb065224792bf4d5543814eaa5fed3)
Signed-off-by: Dit Kozmaj <dit.kozmaj@kynetics.com>
Signed-off-by: Diego Rondini <diego.rondini@kynetics.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic plugin crashed if IMAGE_EFI_BOOT_FILES is not empty and uefi-kernel
loader specified because of preliminary return from the function.
[Yocto #15033]
Fixes:
| File "/mnt/builds/yocto/sources/scripts/lib/wic/plugins/source/bootimg-efi.py", line 371, in do_prepare_partition
| for src_path, dst_path in cls.install_task:
| ^^^^^^^^^^^^^^^^
| AttributeError: type object 'BootimgEFIPlugin' has no attribute 'install_task'. Did you mean: 'do_install_disk'?
(From OE-Core rev: a6372f70f31b39ce9867b705d02205621d7a8685)
Signed-off-by: Pavel Zhukov <pavel@zhukoff.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In case user requested to build a binary repeatable package,
it's required to honor the SOURCE_DATE_EPOCH environment
variable. So forcefully set mtime inside all the routines
which modify fstab in case it is updated.
(From OE-Core rev: 99719a3712a88dce8450994d995803e126e49115)
Signed-off-by: Sergei Zhmylev <s.zhmylev@yadro.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When SOURCE_DATE_EPOCH variable is set, binary repeatable build
is expected. This commit implements reproducable disk identifiers
in such a case using its value as a Random seed.
(From OE-Core rev: 2c0c54e12169e76f16fb3398904bc897a9190397)
Signed-off-by: Sergei Zhmylev <s.zhmylev@yadro.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
--include-path can be used for placing files on ESP,
like dtbs.
(From OE-Core rev: 46ca73f504b0792766dc4d4bbad38beb04ef4ed0)
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 20d43a2 allows changes in fstab for the / mount. However, if the
fstab contains / already then this results in two entries for / in the
fstab, which is confusing and results in systemd producing errors on
boot:
systemd-fstab-generator[11101]: Failed to create unit file
/run/systemd/generator/-.mount, as it already exists. Duplicate entry
in /etc/fstab?
Wic should be extended to support merging mount points in fstab, but as
we're about to release revert the patch that introduced this change as
it hasn't been in a release yet, and the issue which prompted the patch
in the first place can be revisited post-release.
[ YOCTO #14865 ]
(From OE-Core rev: 4a7b3ef0a69b7e08030519b712a6fe4dd199c571)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's not possible to set the label (of gpt entry) normally
when I want to use non-listed fstype as a rawcopy.
Example)
part ? --source rawcopy --ondisk mmcblk0 --label mypart --sourceparams file=mypart.raw
To resolve this problem, this patch addes a 'none' fstype
and ignore do_image_label on rawcopy (that actually set the partition label.)
(From OE-Core rev: 949cf797eb54f3d22a093910087e937633ce9b23)
Signed-off-by: JeongBong Seo <jb.seo@lge.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Where there isn't a copyright statement, add one to make it explicit.
Also drop editor config lines where they were present and add license
identifiers as MIT if there isn't one.
(From OE-Core rev: deb3ccec53e0bd63bc4235cf2b0d3fc781687361)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For device tree using systems, add support to set a custom devices tree
during UEFI boot. This requires to copy the DTB file to the boot
partition and to add the respective loader entries to the configuration
files.
Both grub and systemd-boot support only loading a specific device tree.
Therefore refuse to work if the 'dtb' parameter contains more than one
entry.
Out of scope for now are overlays (only supported by systemd-boot).
(From OE-Core rev: c5a14f39a6717a99b510cb97aa2fb403d4b98d99)
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
[Luca: rebased on commit 98e9d435b278 ("wic/bootimg-efi: use cross objcopy when building unified kernel image")]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The paths for configuring grub and systemd-boot have some common bits
around copying the initrd files. This will even grow when adding dtb
support. Factor this out into a class function.
Along this, avoid evaluating 'create-unified-kernel-image' multiple
times in do_configure_systemdboot and suppress a bogus warning about
"Ignoring missing initrd" when it is turned on.
(From OE-Core rev: c700cfd88473b9ed4e12a6620fb089f41bd95a9e)
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We can't rely on the host objcopy knowing how to process target binaries,
so use the cross objcopy in the sysroot instead.
Also construct the command argument-by-argument as the format expression
was getting unwieldy.
(From OE-Core rev: 0264aeedbf21e9e7a104243c11b3b57f00e38bda)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix "NameError: name 'orig_path' is not defined".
It's a typo from when this error was handled outside this function.
(From OE-Core rev: 2124ec0d9f9de2da476f0024a0ccf70da987420f)
Signed-off-by: Mihai Lindner <mihai.lindner@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow wic to also manipulate the rootfs entry in fstab, which it
currently refuses to write. Reasons one might want to do that include
using systemd-growfs via --fsoptions on /
With this change / is now handled exactly the same as other
mountpoints, the former exception seemingly was not even documented.
(From OE-Core rev: 20d43a2599d7622b96e2fb0da87a886da1a3794a)
Signed-off-by: Tobias Schmidl <tobiasschmidl@siemens.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The `fspassno` parameter allows to overwrite the value of the last
column (`fs_passno`) in the /etc/fstab of the target root file system.
This allows to have periodic file system checks.
(From OE-Core rev: b9b9f71e6f37bfbf954ade518391b242669481e3)
Signed-off-by: Claudius Heine <ch@denx.de>
Signed-off-by: Vijai Kumar K <Vijaikumar_Kanagarajan@mentor.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patches makes locating the file database containing the file and
folder usernames and permissions more reliable.
In addition to locating it relative to the partition directory, we also
try to locate it relative to the IMAGE_ROOTFS.
Prior to this patch, the database was not found when using
--rootfs-dir=${IMAGE_ROOTFS}/<x> in the WIC script, leading to erronous file
permissions and ownership.
(From OE-Core rev: 09e18ee246da8b56f446c4db548fb9c7e895142b)
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using "msdos" partition tables and "--label" but not "--use-uuid"
one can generate images which will not find their root, because
PARTLABEL does not work for "msdos".
Fix that by simply not going the PARTLABEL path in case of "msdos".
Fixes: 2fb247c5ecf0 ("wic: support rootdev identified by partition label")
(From OE-Core rev: 9ea1a838b946020e026edc032039552b723fcaa4)
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support for packed images to wic rawcopy handler do minimize disk
usage in deploy directory and reuse of packed images between wic and
swupdate. Add `unpack` to sourceparams to unpack an bz2, gz and xz
archives.
Example:
part / --source rawcopy --sourceparams="file=core-image-minimal-qemu.ext4.gz,unpack"
(From OE-Core rev: 4c97d25791389ece041565981ba3207ce9949a1a)
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We already support specifying the rootfs by PARTUUID. This adds general
support for letting the kernel find the rootfs by PARTLABEL.
(From OE-Core rev: 2fb247c5ecf057bb96649a3c0234794b4991c050)
Signed-off-by: Adriaan Schmidt <adriaan.schmidt@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is not invoked with bitbake context as a result bb.utils is not
visible when this function is called during image creation and builds
fail e.g.
NameError: name 'bb' is not defined
(From OE-Core rev: df9dca9fe4dd1abfe5f3986389a8e8ff524da5d7)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Cc: Joshua Watt <JPEWhacker@gmail.com>
Cc: Devendra Tewari <devendra.tewari@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"A unified kernel image is a single EFI PE executable combining an EFI
stub loader, a kernel image, an initramfs image, and the kernel command
line.
[...]
Images of this type have the advantage that all metadata and payload
that makes up the boot entry is monopolized in a single PE file that can
be signed cryptographically as one for the purpose of EFI
SecureBoot."[1]
This commit adds a create-unified-kernel-image=true option to the
bootimg-efi plugin for creating a Unified Kernel Image[1] and installing
it into $BOOT/EFI/Linux/ with a .efi extension per the the Boot Loader
Specification[1][2]. This is useful for implementing Secure Boot.
systemd-boot is the only mainstream bootloader implementing the
specification, but GRUB should be able to boot the EFI binary, this
commit however doesn't implement the necessary changes to the GRUB
config generation logic to boot the Unified Kernel Image.
[1] https://systemd.io/BOOT_LOADER_SPECIFICATION/#type-2-efi-unified-kernel-images
[2] https://systemd.io/BOOT_LOADER_SPECIFICATION/
(From OE-Core rev: b0573f240525df561ddef6e47cb285b217d38487)
Signed-off-by: Kristian Klausen <kristian@klausen.dk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic fstab-update creates invalid entries for partitons that are not supposed to
be mounted from userspace eg u-boot partitions.
The following lines were added to fstab on a rock-pi-4:
/dev/mmcblk1p1 loader1 vfat defaults 0 0
/dev/mmcblk1p2 reserved1 vfat defaults 0 0
/dev/mmcblk1p3 reserved2 vfat defaults 0 0
/dev/mmcblk1p4 loader2 vfat defaults 0 0
/dev/mmcblk1p5 atf vfat defaults 0 0
/dev/mmcblk1p6 /boot vfat defaults 0 0
With this patch only valid entries should be added
/dev/mmcblk1p6 /boot vfat defaults 0 0
(From OE-Core rev: 7aa678ce804c21dc1dc51b9be442671bc33c4041)
Signed-off-by: MarkusVolk <f_l_k@t-online.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows extra space to be added after the last partition and is
especially useful when free space is needed for ex: adding partitions on
first boot with ex: systemd-repart[1] and the image is tested in QEMU.
[1] https://www.freedesktop.org/software/systemd/man/systemd-repart.html
(From OE-Core rev: f81b188bcf5aa18746fd622eb7b5c0dcb0b5c93d)
Signed-off-by: Kristian Klausen <kristian@klausen.dk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When embedding a rootfs image (e.g. 'rootfs-dir') as a partition we
might want to keep the stock fstab for that image. In such a case, use
this option to not update the fstab and use the stock one instead.
This option allows you to specify which partitions get the fstab
updated and which get the stock fstab.
The option matches the argument you can pass to wic itself where the
same action is performed but for all the partitions.
Example:
part /export --source rootfs --rootfs-dir=hockeycam-image
--fstype=ext4 --label export --align 1024 --no-fstab-update
part / --source rootfs --fstype=ext4 --label rootfs --align 1024
(From OE-Core rev: ab4c95af8ecd15dc136194ab761afae756db5803)
Signed-off-by: Daniel Gomez <daniel@qtec.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously the bootimg-pcbios wic plugin was not respecting
the --label option provided from the wks file. The plugin
was setting the label to 'boot'. With this fix, the --label
option is use. If no option are specified, then the default
is 'boot'.
(From OE-Core rev: 0fd7a73c1bd2486b7a022f0f69bbcb2e0d9cb141)
Signed-off-by: jbouchard <jeanbouch418@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since Linux 5.4 a new read-only filesystem is available, erofs.
Compared to squashfs it offers much better read performance with and
without compression enabled.
It suppports two optional compressors, lz4 and lz4hc.
>From the mkfs.erofs man page:
EROFS is a new enhanced lightweight linux read-only filesystem with
modern designs (eg. no buffer head, reduced metadata, inline
xattrs/data, etc.) for scenarios which need high-performance read-only
requirements, e.g. Android OS for smartphones and LIVECDs.
It also provides fixed-sized output compression support, which improves
storage density, keeps relatively higher compression ratios, which is
more useful to achieve high performance for embedded devices with
limited memory since it has unnoticable memory overhead and page cache
thrashing.
This commit adds support for three new filesystem targets:
erofs: erofs without compression
erofs-lz4: erofs with lz4 compresssion enabled
erofs-lz4hc: erofs with lz4hc compression enabled
(From OE-Core rev: 41dead1ff8ccc49e6cd6e6f5d41a59d164693e0d)
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Incremental build in Docker fails with:
OSError: [Errno 18] Invalid cross-device link
when source and destination are on different overlay filesystems.
Rather than adding fallback code to every call site, use a new wrapper
in bitbake which detects this case and falls back to shutil.move
which is slower but will handtle the overlay docker filesystems correctly.
[YOCTO #14301]
(From OE-Core rev: 656a65b2b84e7d529b89cf5de7eb838f902d84a2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
files in wic tmp directory can be usefull for debugging, so do not remove
tmp directory when wic create run with debugging mode (-D or --debug).
also update wic.Wic.test_debug_short and wic.Wic.test_debug_long to
check for tmp directory.
[YOCTO#14216]
(From OE-Core rev: a122e2418b67d38f691edcf8dd846c167d6b4fa9)
Signed-off-by: Lee Chee Yang <Chee.Yang.Lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
