github is dropping support for git protocol in Git urls. Add code to remap
this to https in a way that could be used in older bitbake versions.
(Bitbake rev: af479e239d1e4dc93f0162c5936369a94c1c529d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently these tests rely upon multiple uptream webservers which may change
or be unavailable. Add local copies of the test data, copy the httpserver
from OE-Core (used for testing there) and run these tests against a local
server instead.
(Bitbake rev: b4860b292406698f3c8af9a3708a09df21c96300)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It looks like we're about to see a lot of changes in branch names in repos. If
we have the prune option here, those old names are lost, the changes propagate
to our source mirrors and our old releases break.
We have the force option so any replaced references should be replaced, its only
orphaned branches which will now be preserved.
I believe this behaviour will cause us fewer problems given the changes that
look likely to happen.
(Bitbake rev: 4c7e0352c56dc956fc19439713e8dce9f6248c86)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upstream is unavailable, breaking tests. Switch to a YP mirror since
if we can't reach that there are bigger problems. This should remove
a source of intermittent failures on the autobuilder.
(Bitbake rev: 417f635fca1aa2484c7ccba9ffbbfe9601d41d66)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When parsing recipes its apparent the memory usage of bitbake rises linearly
with number of recipes parsed. It shouldn't.
Using tracemalloc (thanks for the tip Joshua Lock) it was clear that the
dependency information left behind in siggen was the culprit. Add a new
method to allow us to drop this information. We don't need it after the recipe
has been parsed and hashes calculated (at runtime its different but only the
currently executing task would be in memory).
This should give signficant memory usage improvements for bitbake and that
in turn should help speed on more constrained systems, as well as when used in
multiconfig environments.
(Bitbake rev: d411b097d810c386d35dc561f8812bb3f35c9a36)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When there are many watched files, keeping track of them using lists
is suboptimal. Using sets improves the performance considerably.
(Bitbake rev: aa770081d7d3ff678b18117a4b4e9b3da09b72be)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 1e96df260e47d160dbd36bfc92c31ef06266f662)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a weird error in OE-Core where "devtool modify virtual/kernel"
was showing basehash mismatch errors. This was due to SRCPV sometimes being:
AUTOINC+b867b78b50_47b80ef7bd and sometimes AUTOINC+b867b78b50_255a750d28.
The latter hash comes from KBRANCH and meant sometimes the correct branch
was seen, sometimes it was not. The issue was complicated by the execution
using a remote datastore over tinfoil.
The problem turns out to be a fetcher caching error. If the datastore
changes, the cached url data may not be valid.
We therefore ensure we match cached url data against the datastore that
generated it, which appears to fix this issue.
(Bitbake rev: 4ce50bbd34eefeabfeca89a6a66c71598d3c58f6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The variable values that result from parsing multiconfig should be
included in the cooker data hash, otherwise changes to these files won't
be detected, which will allow the parsing cache to be loaded with the
old values for the multiconfigs. This can either manifest as the
variable values simply not updating, or getting basehash changed errors
when building.
This bug was previously undetected because all of the multiconfig base
files were a direct file dependency in all parsed recipes. This was
fixed in 34137a00f60 ("bitbake: bitbake: cooker: Rename __depends in all
multiconfigs"), exposing this bug.
[YOCTO #13541]
(Bitbake rev: 75d6648f232a06b99c54a1e33324a7fc1cd15b38)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
FAIL: test_wget_latest_versionstring (bb.tests.fetch.FetchLatestVersionTest)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/pokybuild/yocto-worker/oe-selftest/build/bitbake/lib/bb/tests/fetch.py", line 1229, in test_wget_latest_versionstring
self.assertTrue(verstring, msg="Could not find upstream version for %s" % k[0])
AssertionError: '' is not true : Could not find upstream version for db
[YOCTO #13496]
The Oracle UPSTREAM_CHECK_URI used changed and does not work with logic in wget.
Update UPSTREAM_CHECK_URI and UPSTREAM_CHECK_REGEX to match the ones used in the
recipe. Also change the version being checked.
(Bitbake rev: 164c0df429fc9be771c54c241b17d7afb8849afc)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* noticed on read-only sshfs premirror
* it was showing the warning about renaming the file:
WARNING: laser-geometry-1.6.4-r0 do_fetch: Renaming /jenkins/mjansa/sshfs/webos-ose-thud/downloads/laser_geometry-1.6.4.tar.gz to /jenkins/mjansa/sshfs/webos-ose-thud/downloads/laser_geometry-1.6.4.tar.gz_bad-checksum_1ee7479b8c5914b4ffae996945121441
and then failed because of movefile() issue with python3 (fixed in previous commit):
ERROR: laser-geometry-1.6.4-r0 do_fetch: Error executing a python function in exec_python_func() autogenerated:
with movefile() fixed, it let do_fetch continue and re-fetch locally with the right
checksum, but still the renamed file didn't exist, because of movefile failure - add
another warning when the movefile fails - for whatever reason - unfortunately movefile
prints error messages with just print() so the real error is hidden only in log.do_fetch
in this case:
movefile: Failed to move /jenkins/mjansa/sshfs/webos-ose-thud/downloads/laser_geometry-1.6.4.tar.gz to /jenkins/mjansa/sshfs/webos-ose-thud/downloads/laser_geometry-1.6.4.tar.gz_bad-checksum_1ee7479b8c5914b4ffae996945121441 [Errno 30] Read-only file system: '/jenkins/mjansa/sshfs/webos-ose-thud/downloads/laser_geometry-1.6.4.tar.gz' -> '/jenkins/mjansa/sshfs/webos-ose-thud/downloads/laser_geometry-1.6.4.tar.gz_bad-checksum_1ee7479b8c5914b4ffae996945121441'
(Bitbake rev: 24e44c412ac36987c1f65ced50030064ec58100d)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the introduction of SPDX-License-Identifier headers, we don't need a ton
of header boilerplate in every file. Simplify the files and rely on the top
level for the full licence text.
(Bitbake rev: 34ed28a412af642a993642c14bd8b95d5ef22cd8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds the SPDX-License-Identifier license headers to the majority of
our source files to make it clearer exactly which license files are under.
The bulk of the files are under GPL v2.0 with one found to be under V2.0
or later, some under MIT and some have dual license. There are some files
which are potentially harder to classify where we've imported upstream code
and those can be handled specifically in later commits.
The COPYING file is replaced with LICENSE.X files which contain the full
license texts.
(Bitbake rev: ac556588fac55e91b7ce4839a975eb9ebb5aa192)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since warrior, python3native.bbclass sets _PYTHON_SYSCONFIGDATA_NAME;
unfortunately, this also affects Python scripts run as fetch commands like
git-make-shallow, breaking it with a message like
Failed to import the site module
Traceback (most recent call last):
File "/usr/lib/python3.6/site.py", line 570, in <module>
main()
File "/usr/lib/python3.6/site.py", line 556, in main
known_paths = addusersitepackages(known_paths)
File "/usr/lib/python3.6/site.py", line 288, in addusersitepackages
user_site = getusersitepackages()
File "/usr/lib/python3.6/site.py", line 264, in getusersitepackages
user_base = getuserbase() # this will also set USER_BASE
File "/usr/lib/python3.6/site.py", line 254, in getuserbase
USER_BASE = get_config_var('userbase')
File "/usr/lib/python3.6/sysconfig.py", line 607, in get_config_var
return get_config_vars().get(name)
File "/usr/lib/python3.6/sysconfig.py", line 550, in get_config_vars
_init_posix(_CONFIG_VARS)
File "/usr/lib/python3.6/sysconfig.py", line 421, in _init_posix
_temp = __import__(name, globals(), locals(), ['build_time_vars'], 0)
ModuleNotFoundError: No module named '_sysconfigdata'
on an Ubuntu 18.04 system (and likely others) when building with
BB_GIT_SHALLOW and BB_GENERATE_SHALLOW_TARBALLS.
Unset _PYTHON_SYSCONFIGDATA_NAME in runfetchcmd() to work around this.
(Bitbake rev: 6783104f18a8a14ddd88932720cd80dffeada63d)
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because we are trying to avoid network activity and use our own fetcher,
the system emulates the behavior of 'git submodule init'.
git submodule init uses the .gitmodules file, where typically the module
name and path are the same. However, in this case the module name and
path (in the tree) were different. i.e.:
[submodule "edgelet/hsm-sys/azure-iot-hsm-c/deps/azure-c-shared-utility"]
path = edgelet/hsm-sys/azure-iot-hsm-c/deps/c-shared
url = https://github.com/Azure/azure-c-shared-utility.git
Previously the code assumed the 'path' was both the checkout location
under .git/modules, as well as the path to extract the components. This
proved to be incorrect as the .git/modules path needs to match the submodule
'name'. This causes the components that were fetched to be initialized in
the wrong location, which later caused the 'git submodule update' process to
skip not properly initialized modules.
A test case was added for this specific case to ensure a regression does
not appear in the future.
(Bitbake rev: 2a823584a5dbc2427060352f3b4798dbb2640cfd)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The renaming of the __depends variable to __base_depends and file
watches needs to occurs for all multiconfigs, not just the base config.
Failing to do this for all multiconfigs will result in a huge increase
in the size of the parsing cache (about 5x for a single mulitconfig)
because all multiconfig caches will still depend on the base config
files. This will also seen a similar jump in the amount of time required
to load the parsing cache from memory, both because the cache is larger
and because of explosion of additional existence checks that must be
done for the base files.
[YOCTO #13359]
(Bitbake rev: 2ea1e6720c66841baa5e01c523c86f8ecb03eb7d)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you have no BBMULTICONFIG set but set mcdepends, they're currently
ignored. We can handle them correctly with this small tweak.
(Bitbake rev: 2aaea2f72e0c37451e7c7851b3a32abd733b38e1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Build will fail if repository has lfs contents in absense of git-lfs tool on host.
Build will pass if repository may or may not contains lfs content if host has git-lfs installed.
[YOCTO #13198]
(Bitbake rev: 7107c1953b4c949b81491295e03736beb085b055)
Signed-off-by: Naveen Saini <naveen.kumar.saini@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Let mkdirhier fail if existing path is not a folder instead of assuming a
directory hierarchy already exists.
(Bitbake rev: a8d9b82ccf93dcb74258693f62d88be380b1c0b7)
Signed-off-by: Andre Rosa <andre.rosa@lge.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make prune_suffix prune a suffix instead of replacing a substring that could
happen more than once and not only when it ends with it.
(Bitbake rev: 57e765e38c6382a9b36d5ee2a6f3fa96ac905b82)
Signed-off-by: Andre Rosa <andre.rosa@lge.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the system had previously fetched a source repository for use by gitsm,
and then the SRCREV was updated and the new commit already existed, the system
would not re-evaluate the submodules and update them accordingly.
The cause of this issue was that need_update was being used, unmodified, from
the base git fetcher. It did not have any knowledge, nor did it care if we
were moving commits and needed to re-evaluate what was happening due to this
switch.
To fix the issue, during the download process we add all processed (by
gitsm) srcrevs to the git config file, as bitbake.srcrev. This allows us to
use a new need_update function that not only checks if the git commit is
present, but if we have previously processed this commit to ensure all of the
submodule components are also present.
This approach is used, instead of iterating over the submodules in need_update
to avoid a potential race condition that has affected us in the past. The
need_update is called only with the parent locking. Any time we need to dive
into the submodules, we need to lock, and unlock them, at each stage. This
opens the possibility of errors in either the code, or unintended race
conditions with rm_work.
This issue was discovered by William A. Kennington III <wak@google.com>. The
included test case was also written by him, and included unmodified.
(Bitbake rev: 30fe86d22c239afa75168cc5eb262b880886ef8a)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make it consistent with BB_FETCH_PREMIRRORONLY.
(Bitbake rev: 4c6013f47ef36b03f590c909d7c9a2f50b698620)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The fetch2/__init__.py checks whether "BB_FETCH_PREMIRRORONLY" == "1", but
fetch2/git.py and hg.py checks whether it is None, this makes it discontinuous,
and BB_FETCH_PREMIRRORONLY = "0" doens't work as expected in the later case,
so unify it to the previous one. (As BB_NO_NETWORK does).
And also use bb.utils.to_boolean() to make them consistent.
(Bitbake rev: 85a0d22835588e9ad8ec29d88a8115227e88420c)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes it easier to debug, especially when multipe SCMs like gitsm,
otherwise we don't know why there are multiple SCMs.
(Bitbake rev: 313fe5e86b254eadfdead706be4bd7b274d5e3c0)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The localpath is a symlink to clonedir when it is cloned from a mirror, for
example:
$ bitbake systemtap-native -cfetch
$ ls downloads/git2
sourceware.org.git.systemtap.git -> /path/to/downloads/git2/mirror.path.git.sourceware.org.git.systemtap.git
mirror.path.git.sourceware.org.git.systemtap.git
There are both sourceware.org.git.systemtap.git and
mirror.path.git.sourceware.org.git.systemtap.git in DL_DIR/git2, the symlink
sourceware.org.git.systemtap.git is created by try_mirror_url(), but
do_cleanall" only removed the symlink, didn't remove the real dir
mirror.path.git.sourceware.org.git.systemtap.git, this may cause confusions,
for example, I assumed that do_cleanall removed everything, but it didn't, and
it would the re-used next time when do_fetch. This patch fixes the problem.
(Bitbake rev: 452e2200ad2c29dec3753f5f7a8cbc9183ec7dd8)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The layer was not in bbfile_config_priorities when BBFILE_PATTERN is empty,
this caused "bitbake-layers show-layers" can't show these layers, this was
incorrect since these layer did exist. Add these layer to
bbfile_config_priorities can fix the problem.
Fixed:
Add BBFILE_PATTERN_core = "" in oe-core/meta/conf/layer.conf
$ bitbake show-layers | grep oe-core
There was nothing, now the layer is shown
(Bitbake rev: 0ff5cdb0cca9266ca29127639494bcfd95e36831)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The workdir is an important message when run git command, for exmample, before the patch:
Running git -c core.fsyncobjectfiles=0 branch --contains [snip]
We don't know where it is running, now it is:
Running 'git -c core.fsyncobjectfiles=0 branch --contains [snip]' in /path/to/git.opensvc.com.multipath-tools..git
Which is easier to debug.
(Bitbake rev: f25c05b73218d0e8edf2dd63b36bc09e547c5455)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Various refactors have left hanging variables, often in debug messages, hence
why they haven't been spotted. Fix them (pylint spotted the issues).
(Bitbake rev: e1f252408982a62485bbf874a01fd30a02aeed32)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Clean up the whitespace and comments style, keep pylint happy.
(Bitbake rev: ee59fdaae68543ade03cacfdbbf14fdc7e469412)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix a typo in a variable which would affect proxy handling spotted by
pylint.
(Bitbake rev: 19f4ca0119e33df64da629253d5002fcdb385f4f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I wonder how this used to work for anybody.
(Bitbake rev: 9481e9cd688f635a7fe2ac60d5826ac26f0cb9ba)
Signed-off-by: Stefan Klug <stefan.klug@baslerweb.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, this would happen:
======================================================================
ERROR: test_vercmpstring (bb.tests.utils.VerCmpString)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/alexander/development/poky/bitbake/lib/bb/tests/utils.py", line 45, in test_vercmpstring
result = bb.utils.vercmp_string('1.', '1.1')
File "/home/alexander/development/poky/bitbake/lib/bb/utils.py", line 143, in vercmp_string
return vercmp(ta, tb)
File "/home/alexander/development/poky/bitbake/lib/bb/utils.py", line 135, in vercmp
r = vercmp_part(va, vb)
File "/home/alexander/development/poky/bitbake/lib/bb/utils.py", line 124, in vercmp_part
elif ca < cb:
TypeError: '<' not supported between instances of 'NoneType' and 'int'
----------------------------------------------------------------------
(Bitbake rev: fef56d28c3efec4876c379898cbc4d4c65303aee)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There were a couple of problems with the multiconfig dependency resolution:
- the "if mc" condition triggering this code wasn't correct, it needs
to be "if more than one multiconfig" configured
- after adding providers we need to call add_unresolved again
and rebuild mcdeps within the "while new" loop
By fixing these issues we allow various other combinations of multiconfig
builds to work which previously didn't.
[YOCTO #13090]
[YOCTO #13130]
(Bitbake rev: 4359b037de578095db2595f119dfb8e3340e1414)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was already a fix to ignore some multiconfig dependencies but its
'opposite' case wasn't covered. Cover that combination to so as to avoid
tracebacks in multiconfig builds.
[YOCTO #13090]
[YOCTO #13130]
(Bitbake rev: c883dfe378af9dfc192a8e392e84325d68648806)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The consumers of BB_TASKDEPDATA in OE metadata can't cope with multiconfig
dependencies. The choice is either to start adding code to each of them to
filter out multiconfig dependencies, or do this at source.
After consideration we've decided to do this at source as doing otherwise
is code duplication and error prone and in any case we've looked at, they
don't make sense.
[YOCTO #13090]
[YOCTO #13130]
(Bitbake rev: 531dcd221a10853f45cc057b52bb2d5083e0ee42)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the mechanism for breaking out of the dependnecy loop analysis
code is broken and doesn't work leading to bitbake appearing to hang.
Add in a custom exception for this purpose and fix the code to exit
as intended, fixing the hang and making the dependency loop code
usable again.
(Bitbake rev: 8756e4ade67c16e35269ea0659e10b9ebaa6117f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes FAKEROOTCMD so that it can accept additional arguments to pass
to the fakeroot implementation instead of being treated as a simple
command
(Bitbake rev: 4fa51afb56b090cf1f746842acd602c9536715d5)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It shouldn't work when there are duplicated BBFILE_COLLECTIONS.
(Bitbake rev: a1f251e5ab859d6d4a2cb908408d4ddcab5a5de1)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously this information was simply discarded, which in some cases
resulted in generic, unhelpful failures.
With this change the user would see what the exception is, but
without ugly tracebacks or bulky, irrelevant information from the log file.
(Bitbake rev: 8da9242702fbef8cf3156b95a1076802e0f653c7)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
getVar() has been defaulting to expanding by default for
a long time (2016), thus remove the True option from
getVar() calls with a regex search and replace.
Search & replace made using the following command:
sed -e 's|\(d\.getVar \?\)( \?\([^,()]*\), \?True)|\1(\2)|g' \
-i $(git grep -E 'getVar ?\( ?([^,()]*), ?True\)' \
| cut -d':' -f1 \
| sort -u)
(Bitbake rev: 3bba0dbd524cf72176a765957adff544ae5c255a)
Signed-off-by: André Draszik <andre.draszik@jci.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The intent of the code was to catch one kind of error, it was actually swallowing
all exceptions and looping indefinitely. Fix it to work as intended.
This explains some mystery hangs we've been seeing.
(Bitbake rev: d73dbc3580faa1225d95ae4cefac4879ca3c1b2f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
- Add the following lines to conf/local.conf:
FOO = "BAR1"
FOO_append = "\
BAR2"
$ bitbake -e | grep '^FOO'
FOO="BAR1BAR2"
The leading spaces in the second line have been removed.
- But if add the previous two lines to base.bbclass:
$ bitbake -e | grep '^FOO'
FOO="BAR1 BAR2"
The leading spaces in the second line are preserved, this is inconsistent, now
fix ConfHandler to preserve leading spaces.
[YOCTO #12380]
(Bitbake rev: 8c3bc15a7b5e0a81d7b6c9d3fe43fbff63207156)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move the submodule processing outside of the if statement to avoid any
optimizations that may happen.
Update the test cases to include the additional case, and split the other
test cases into individual tests to make it easier to figure out what
the failure may be.
(Bitbake rev: 0ec98c01ae50f95c9c74acf53013ac59e0e72b08)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the submodule is in a subdirectory, it needs to have that structure
preserved. This means the unpack path needs to be in the 'dirname' of the
final path -- since the unpack directory name is specified in the URI.
Additional specific test cases were added to ensure this is working properly
based on two recent error reports.
(Bitbake rev: 8c8ecec2a722bc2885e2648d41ac8df07bdf660d)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Prior code happened to work with relative URLs, when the code was recently
restructured it caused all relative urls to no longer work. Restore the prior
code flow for relative support and better comment why that code is there.
(Bitbake rev: 14bb383af0ca98e0e04ec217e537b6a899f3658e)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't want references including shell parameter expansion modifiers
(i.e. `:-`, `#`, `%%`, etc) to be added to our vardeps, so add a test to
ensure this.
YOCTO #12987
(Bitbake rev: be022085fe1ea1b9a9d519f0455883e2da363d2c)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
