Benchmarks show that the introduction of pyinotify regressed
performance. This patch ensures we only call the add_watch() function
for new entries, not ones we've already processed which does improve
performance as measured by "time bitbake -p".
This doesn't completely remove the overhead but it does substantially
reduce it.
(Bitbake rev: 493361f35f6cc332d4ea359a2695622c2c91a9c2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We try and add watches for files that don't exist but if they did, would influence
the parser. The parent directory of these files may not exist, in which case we need
to watch any parent that does exist for changes. This change implements that fallback
handling.
(Bitbake rev: 979ddbe4b7340d7cf2f432f6b1eba1c58d55ff42)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Memory resident bitbake has one current flaw, changes in the base configuration
are not noticed by bitbake. The parsing cache is also refreshed on each invocation
of bitbake (although the mtime cache is not cleared so its pointless).
This change adds in pyinotify support and adds two different watchers, one
for the base configuration and one for the parsed recipes.
Changes in the latter will trigger a reparse (and an update of the mtime cache).
The former will trigger a complete reload of the configuration.
Note that this code will also correctly handle creation of new configuration files
since the __depends and __base_depends variables already track these for cache
correctness purposes.
We could be a little more clever about parsing cache invalidation, right now we just
invalidate the whole thing and recheck. For now, its better than what we have and doesn't
seem to perform that badly though.
For education and QA purposes I can document a workflow that illustrates this:
$ source oe-init-build-env-memres
$ time bitbake bash
[base configuration is loaded, recipes are parsed, bash builds]
$ time bitbake bash
[command returns quickly since all caches are valid]
$ touch ../meta/classes/gettext.bbclass
$ time bitbake bash
[reparse is triggered, time is longer than above]
$ echo 'FOO = "1"' >> conf/local.conf
$ time bitbake bash
[reparse is triggered, but with a base configuration reload too]
As far as changes go, I like this one a lot, it makes memory resident bitbake
truly usable and may be the tweak we need to make it the default.
The new pyinotify dependency is covered in the previous commit.
(Bitbake rev: 0557d03c170fba8d7efe82be1b9641d0eb229213)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the cooker is in an error state, we shouldn't continue to try parsing.
This fixes an issue where an invalid PR server is detected when bitbake
is started and ensures bitbake exits cleanly rather than hanging.
[YOCTO #6934]
(Bitbake rev: 294bb9cad294423d4f8998405ceff58655f12660)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a BBFILE_PATTERN_IGNORE_EMPTY variable to allow ignoring the fact
that a regex specified in BBFILE_PATTERN for a particular collection
doesn't match any recipes. This will be used in OpenEmbedded in the
workspace layers created by "devtool" which may not always contain any
recipes (which is not cause for warning the user).
(Bitbake rev: 19c74aaa2836a88d666f0032452fac521689ab6b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds a "-w/--write-log" option to bitbake
that writes an event log file for the current build.
The name of the file is passed as a parameter to the "-w"
argument. If the parameter is the empty string '', the file
name is generated in the form bitbake_eventlog_DATE.json,
where DATE is the current date and time, with second precision.
The "-w" option can also be supplied as the BBEVENTLOG
environment variable.
We add a script, toater-eventreplay, that reads an event
log file and loads the data into a Toaster database, creating
a build entry.
We modify the toasterui to fix minor issues with reading
events from an event log file.
Performance impact is undetectable under no-task executed builds.
(Bitbake rev: 1befb4a783bb7b7b387d4b5ee08830d9516f1ac2)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, if an invalid PR service is selected the server will error
with a traceback. This is because its set into the error state and the
setFeature code will then fail since its not in the initial state.
Modifying the featureset in the error state is acceptable, we just need
to ensure we don't trigger a reset, that would happen from whichever
code handles the error.
[YOCTO #6934]
(Bitbake rev: c52841445d8db8f84c4da34203b195fea5874247)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
1) Run "bitbake recipe" in the terminal
2) Close the terminal while building
3) $ ps aux | grep bitbake-worker
There will be many processes, and they will keep the resources (e.g.,
memory), and won't exit unless kill or kill -9.
(Bitbake rev: 40d2ae0723de2bf5fee343faafb4afda40546839)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
loginfo "op" was being set to invalid values in saveConfigurationVar it was
working because set is a python global but append is not. This replaces both
the "op" with strings and removes the crash when calling appendConfigurationVar
(Bitbake rev: 2a8e847de85546d43600a561f9c63aa36bd69222)
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using options like -k, -f, -v and so on with the memory resident
server, they'd currently only be set on the initial values passed to
the original command. This ensures they now match those specified
on the commandline for the options where this makes sense.
To make this work, a command to update the options on the server side
is required so this is added.
[YOCTO #5292]
(Bitbake rev: 1c75cc4d0c8b606c1fe76e6bf60bf6a32298b105)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
since python-2.5 string.endswith() takes a tuple
(Bitbake rev: 86a67a1fd4244da9343dbf14deed1ad0d3003f32)
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The re module was imported at the top, no need to do it again.
(Bitbake rev: c29c2370635075949c75937c237602600f4f10dc)
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(Bitbake rev: 1cd369883469747a8158826bb8d67dcca2a8577f)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This solves a problem of custom images which inherit a base
image with IMAGE_BASENAME overwritten in their recipe by a
different value than its default one: ${PN}.
The value of IMAGE_BASE causes a crash when hob will try to
create symbolic links to the resulting images from the deploy
directory, because it will look for names similar to
<original_recipe_name>-edited-timestamp-machine.rootfs.*
which might be different from the actual resulting image.
The solution is to simply overwrite IMAGE_BASENAME in the
custom recipe to the default value in the case IMAGE_BASENAME
is found in the base recipe.
Some recipes which were affected by this problem are those
from meta-fsl-demos (e.g.: fsl-image-test).
[YOCTO #6017]
(Bitbake rev: e42ee93519000f827be49659b6b5fb7717b3d592)
Signed-off-by: Marius Avram <marius.avram@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch makes sure that the setFeatures command is marked
as read-only and that it can only run if the cooker is in
the initial state.
Additionally, remove logging from the XMLRPC module in favor
of sending the exception to the client for easy processing.
[YOCTO #6089]
(Bitbake rev: f0a1a3e24757f7658d272035620465f92a3e4c3c)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the featureset didn't match the defaults, we'd pay the price of two
base configuration parses which showed up adversely in the performance
benchmarks. This also passes the feature set into the cooker creation so
in the common case we don't have to reset the server. This speeds up
both knotty and hob startup. If the featureset doesn't match, the system
will reset as before, this just streamlines the common case.
(Bitbake rev: 1249543c4dbf3edeac033d888497864cfc807a4e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the change to more optimal default featureset behaviour, a race was
exposed by hob where the code may try and change self.data before it
exists. This change avoids that.
When the datastore is created, the cooker configuration is used so
data tracking is correctly handled regardless.
(Bitbake rev: 9d8f7efbc39d64124936ccaeb3c47a112e595d78)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sanity tests are currently a pain as its hard to control when they run. This results
in issues where for example the bitbake -e output is not useful as the sanity tests
prevent it from executing. The sanity tests should run later than the base configuration.
This patch changes the sanity tests to always be event triggered with the option of
returning either events on the status, or raising errors. A new cooker feature is used
to change the behaviour depending on the controlling UI.
This does need a change to sanity.bbclass in the OE metadata but its worth the pain
for the increased flexibility and control this offers UIs and the improvement to the
user experience.
(Bitbake rev: 32e171bcc92c6e27fefee971e8714ddf8e1a8ac1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a variable was removed from a configuration file it was not
removed from memory. This also had the effect of not allowing
to set a new value for the same variable with saveConfigurationVar.
(Bitbake rev: 30cd1fab6633aaf50ef53eefccc6d69d598eb293)
Signed-off-by: Marius Avram <marius.avram@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes an issue in hob which happened when the local.conf file was
modified externally by appending "eclipse-debug" to the IMAGE_FEATURES
variable. The reason of the problem is that some IMAGE_FEATURES are
not available in the image.bbclass file and they are declared in the
core-image.bbclass. Now a default hob image will inherit core-image.
[YOCTO #5711]
(Bitbake rev: 81413d94f40f58d790d7a7dc4259108f9c5d4fc0)
Signed-off-by: Marius Avram <marius.avram@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the cooker receives a SIGTERM it currently hangs using 100% CPU,
This patch adds in an intercept for the event and puts the cooker into
shutdown mode allowing it to exit cleanly/safely and avoiding the hang.
(Bitbake rev: 00c22434123739b0819b31d7b1d353901a3e12da)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a command to allow backends to set particular 'features' on the
cooker (server).
(Bitbake rev: f547d6ec6cfd677d71fa96dd3c69823c00dc6c69)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It must be checked first if parser has the attribute 'shutdown' when
user hits Stop button and the forceshutdown state is given.
[HOB #5579]
(Bitbake rev: 46943b442ea4fa778f70590b6dcce483595efaf8)
Signed-off-by: Irina Patru <irina.patru@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently its near enough impossible to tell bitbake to run target X,
task Y and target A, task B. We could hack various parts of the API
around but it would mean incompatibilities.
An alternative is to accept the syntax "<target>:do_<task>" as a target
name. The default task would be used where the task is unspecified.
This has the advantage that its neat/clean code and works from all
current APIs including the commandline.
(Bitbake rev: 55f6bee3114e582333a1784caeddb197b9163d02)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(Bitbake rev: 34afbdd0fc809b8fb20696aeef3e6a61d6812e16)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
initConfigurationData and loadConfigurationData are similar functions, the only
reason for them appears to be to be able to reset the pre/post configuration
files. The current code is confusing and unmaintainable.
Instead this patch creates a new Sync command which allows these to be explicitly
set. The init and load functions can then be merged into one. There is then no
need for a parseConfiguration command, we can simply reset the server to have the
settings take effect.
The reset fuction is not an instant value return and triggers an event so it should
be an Async command, not a sync one.
The number of calls for the set pre/post command is probably higher than it
need be but someone with more familiarity with the hob code base can probably
figure out the right places its needed (maybe just init_cooker?).
(Bitbake rev: bae5210d7e048022f083361964ebec7daf1608f7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The idea is to build on the --status-only option for bitbake and
expose a mechanism where the oe init scripts can easily switch between
memres server and the non-memres server.
In the case of the standard oe init script the following
can shut down the server:
if [ -z "$BBSERVER" ] && [ -f bitbake.lock ] ; then
grep ":" bitbake.lock > /dev/null && BBSERVER=`cat bitbake.lock` bitbake --status-only
if [ $? = 0 ] ; then
echo "Shutting down bitbake memory resident server with bitbake -m"
BBSERVER=`cat bitbake.lock` bitbake -m
fi
fi
A similar function can be used to automatically detect if the server
is already running for the oe memres init script. This new
functionality allows for the memres init script to be started in a new
shell and connect up to an alaready running server without seeing the
error of trying to start the server multiple times.
(Bitbake rev: b1803958de8d7c3c3279841e38604a08dc2316cc)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'bbappend in f' incorrectly compares the current recipe with the avaliable
bbappends recipes. This comparsion causes unrequested bbappend files to be
appended, e.g. in the case of 'libgcc_4.8.bb', the bbappends for 'libgcc_4.8.bb'
and 'gcc_4.8.bb' are added to the filelist (because 'gcc_4.8.bb' is contained in
the 'libgcc_4.8.bb' string) which in turn causes the gcc_4.8.bbappend files to
be appended to the libgcc_4.8 recipe.
This should be a 'bbappend == f' to match the previous implementation of this
function, such that if no wildcard is present the recipe names must match
exactly.
This issue was introduced by commit 31bc9af9cd56e7b318924869970e850993fafc5f,
which it related to [YOCTO #5411].
(Bitbake rev: 991cbeedbde8bd25ce08c669b1bfac8b99e33149)
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There has been a continuing call for supporting wildcard in bbappend
filenames. The wildcard is actually allow matching of the name and
version up to the point of encountering the %. This approach will
allow for matching of the major or major.minor.
Exampes:
busybox_1.21.1.bb
busybox_1.21.%.bbappend will match
busybox_1.2%.bbappend will also match
if we update to busybox_1.3.0.bb the above won't match, but a busybox_1.%.bb
will.
[YOCTO #5411]
(Bitbake rev: 31bc9af9cd56e7b318924869970e850993fafc5f)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch changes bitbake to log an error to the
command line when the build is interrupted via Ctrl-C.
This is needed to inform the user that not all tasks
required for the build have been executed, and
the build is not complete.
Internally, the Bitbake server will return a CommandFailed
event that will be logged by Toaster as build failure.
(Bitbake rev: 9a658e8b1511f1b9f91663f546f748fdfbc8965f)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to track the file where a configuration
variable was defined, this patch bring these changes:
* a new feature is defined in CookerFeatures, named
BASEDATASTORE_TRACKING. When a UI requests BASEDATASTORE_TRACKING,
the base variable definition are tracked when configuration
is parsed.
* getAllKeysWithFlags now includes variable history in the
data dump
* toaster_ui.py will record the operation, file path
and line number where the variable was changes
* toaster Simple UI will display the file path
and line number for Configuration page
There is a change in the models to accomodate the recording
of variable change history.
[YOCTO #5227]
(Bitbake rev: 78e58fed82f2a71f052485de0052d7b9cca53ffd)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the user explicitly asks to build a target that is listed in the
value of ASSUME_PROVIDED, show a warning mentioning that it will be
ignored.
(Bitbake rev: 65be09f5e2a4a41e65c9232e208d8154b822fc4e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also removed some redundant file manipulation code
Based on patch sent by Stefan Stanacar <stefanx.stanacar@intel.com>
(Bitbake rev: e054c1e7c8581f66082fcdfb89769401ca6e78a3)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building a single file, the cooker will recreate
the recipecache from scratch.
I suspect this is a remnant of past code, since:
* the current recipecache works fine
* the new recipecache will not have all the fields as
requested by HOB_EXTRA_CACHES setting
This patch disables recreating the recipecache, leading
to shorter times when building single build files
(-b option) and better compatibility with Toaster.
(Bitbake rev: 618d69b00075981b8553513130d7deb1aed61578)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Toaster needes to record extra data that needs to
be moved at the time of the dependency tree dump.
This data includes:
* layer priorities for recording in the layer section
* the inherit list for each PN which allows to determine
the type of the PN (regular package, image, etc).
This patch adds this data to the dependency tree dump.
(Bitbake rev: 7636aba37320aaf9b044d3832ddc21af51ccd69c)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently if errors occur when starting the PR service, there is a race that
occurs since the UI runs various commands including starting builds before
processing the CookerExit(). By adding the error state and refusing to run
async commands in this mode, builds are prevented from starting and the
UI reaches the exit code with the system shutting down cleanly.
(Bitbake rev: 42fa34142ea685f91115a551e74416ca28ef1c91)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch that implements removeConfigurationVar method was made before
merging the patch that replaces "added by bitbake" with "added by hob".
This patch corrects this issue.
[YOCTO #5284]
(Bitbake rev: 42601a5edef0316767b952b162123534aa8fee18)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In Hob settings, there is a tab to add/remove extra settings. This
patch implements a way to "remove" variables from conf files, through
bitbake. But, to keep the history assigment of the variables synchronized,
instead of removing, it replaces the lines with blank lines.
[YOCTO #5284]
(Bitbake rev: bd720fb63cef6b399619b8fbcaeb8d7710f2d6df)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
MACHINE var is saved using early assignment operator.
Calling MACHINE=x bitbake core-image-... works properly.
Comment "#added by bitbake" is replaced with "#added by hob".
[YOCTO #5070]
(Bitbake rev: 2d0ec8ff083b636a6cf98de3278900eb95c3def6)
Signed-off-by: Valentin Popa <valentin.popa@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding the 'getAllKeysWithFlags' read-only command that will
return a dump of the global data state, together with specified
flags for each key. The flag list is passed in as the first
parameter to the command.
This will be used by UI clients to get the build configuration.
(Bitbake rev: 3e094da513e1220319288806cb76ddf804772afd)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The loaded cache modules may add extra attributes to
the recipecache, that will be populated by the cache
classes required by the UI. These attributes
will be used by the UI to display relevant information.
Adds cachefields cache class field to specify
for each cache class which attributes will be set
in the recipecache.
Adds code to automatically expand depends tree with the
fields exported by the extra cache class.
Fixes a cache field name in the HOB UI.
(Bitbake rev: 47c171005fb3803d936e65fcd4436c643883ae16)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding a CookerFeature that allows UIs to enable
receving a dependency tree once the task data has been
computed and the runQueue is ready to start.
This will allow the clients to display dependency
data in an efficient manner, and not recompute the runqueue
specifically to get the dependency data.
(Bitbake rev: 75466a53b6eece5173a9bfe483414148e4c06517)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implementing feature set selection that allows a client
to enable specific features in the server at connection time.
Only enabling of features is supported, as there is
no way to safely remove data loaded into the cooker.
Once enabled, a feature will remain enabled for the
life of the cooker.
Client-server connection now supports specifying the feature
set required by the client. This is implemented in the Process
server using a managed proxy list, so the server cooker
will now load dynamically needed features based on what client
connects to it.
In the XMLRPC server the feature set is requested by
using a parameter for registerUIHandler function.
This allows observer-only clients to also specify features
for the server.
The server code configuration now is completly separated
from the client code. All hardcoding of client knowledge is
removed from the server.
The extra_caches is removed as the client can now specify
the caches it needs using the feature. The UI modules
now need to specify the desired featureSet. HOB is modified
to conform to the featureSet specification.
The only feature available is CookerFeatures.HOB_EXTRA_CACHES
which forces loading the bb.cache_extra:HobRecipeInfo class.
(Bitbake rev: 98e594837aab89ea042cfa9f3740d20a661b14e2)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The syntax used for checkPackages implies a copy is returned but it
did not do so. Make it so.
This is fixes universe builds where error messaages were being shown
but there should have only been warnings.
[YOCTO #5222]
(Bitbake rev: 97db2a0792d605f27d434bc6a4acce52857deee1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Clean-up to avoid duplication and promote code reuse to factor
taskdata creation into a common function.
[RP: minor tweaks]
(Bitbake rev: 468c221449290c4f196e87f7d8e23fcd7db86135)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Exiting from the server is antisocial, instead we should raise an exception. This
will correctly fail the current command and reset the server state. We use
the handled exception since for these conditions to occur, something was
already displayed to the user.
(Bitbake rev: dacc94bcace85a2e95aee2dccd8e680c59e4545f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After running a command on the server, it needs to reset to the initial
state. This ensures that subsequent clients start from a known state
and notice any configuration changes.
Ultimately we may want to do more than this buts a good start and better
than nothing.
(Bitbake rev: dd15648fc2654b8d7c3e00ea7ab3dbf04f24f24b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The shutdown state causes the server to finish what its doing, stop was
them meant to completely stop it. It doesn't mean the server is stopped
though. Renaming the current stop event for forceshutdown gives more
meaning to what it actually does. The stopped namespace then becomes
available to indicate a completely stopped server.
(Bitbake rev: 12e9d33bfae5294e3870dfd1202f63383ad05e92)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the cooker event data isn't rebuilt upon reset and the cache
configuration cannot be changed after init. These are both bad things
and this patch refactors the init/reset code so that it is possible
to reconfigure the server.
(Bitbake rev: 1193b8d76fcb6cb87e9ec135a2514370d7dd90ac)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This call only ever happens in cooker context now so we can drop the
nasty worker check from here.
(Bitbake rev: bc0b30199a8e3624c5b9914430adbcc7c6bd4497)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cookerdata.findconfigFile method has a new parameter. Changed some calls.
(Bitbake rev: dce0f9d4afe0986e2dd0146944fc4ac9dde275e4)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
updateCache handles the logic for shutting down the parsing so we need
to call it for all cases when we're not running.
This fixes hangs if Ctrl+C is pressed during parsing.
(Bitbake rev: 552b8935dd2f9f11e8d5c08a597a7e966b891480)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hob retrieves the list of recipes and packages using the IMAGE_INSTALL
variable, so a custom image should be saved using this variable.
Changed how the image is saved in a bb file
[YOCTO #4193]
(Bitbake rev: edf3f52c05d86d49b71770cdafde583213e2034d)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saving an image that requires another image will cause issues when
the second on is removed. So, we have agreed to "require" only the images
from layers.
The functionality is implemented in bitbake, in order to be more abstract,
and it is used by Hob when an image recipe is saved.
[YOCTO #4193]
(Bitbake rev: 28296ca78507ba2e414eb136c81afee65a8e25e5)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was necessary to append ${TOPDIR}/recipes/images to BBFILES.
Implemented the mechanism to append a value to a variable: a command and
the method in cooker.
[YOCTO #4193]
(Bitbake rev: 4aedbee90bd92395c2460a68702e6ede00e256c9)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When an new image is saved, the dialog for this action has
a field for the description. Changed how an image is saved, by
appending the DESCRIPTION variable at the end of the .bb file.
[YOCTO #4193]
(Bitbake rev: 5629007f2b984005e3a8ac5d9b71422cbc2f1409)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modified generateNewImage function from cooker, in order to be used to
save a template in Hob.
Created a command to ensure that some dirs are created. The templates
(recipes) will be saved in {TOPDIR}/recipes/images folder.
Called these methods from Hob.
[YOCTO #4193]
(Bitbake rev: 96ffa00945c7eb09a0132fa47159aef3ef20fb3e)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In this case, the comment is appended to the end of the file.
Some text editors, do not place a '\n' to the end of the file
after saving it.
[YOCTO #4636]
(Bitbake rev: 2beb9589b1bd9773f587b4dc08afdfe50f4ea913)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As it is implemented now, when parsing the configuration files is
needed, it also needs an initialization.
Also, implemented a function to create an extra configuration files
which can be used as postfile/prefiles when parsing.
(Bitbake rev: 5fe23c1b51da14f58f8c483f43f30b48766a0913)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we reset, the current tracking value may change unexpectedly. This
patch ensures that the default value is preserved over a datastore reset.
(Bitbake rev: 0aa27598d9fdc8c3d18839b3ef93d0ba9698f761)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The command for reparse does nothing, so I have managed to remove it,
because it can be misleading. When a reparse is needed, it can be used
the parse function.
(Bitbake rev: 188eaba121789112ffeb1188f0984d23dfe8df4f)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the change to bitbake-worker we need to ensure the workers know
how to contact the PR service, the magic 0 port and singleton is
no longer enough.
(Bitbake rev: c761751e259bb8e940552a28794b45887b5a72d9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The reasons for combining these objects is ancient history, it makes
sense to clean things up and separate them out now. This follows on
logically from the configuration cleansups and leads well into the
bitbake-worker changes.
(Bitbake rev: 89ffd62661ebcf2a97ce0c8dfd5e4d5bfbe27de7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The collection of the extra caching data should not
be performed by the cooker, but supplied to it.
This patch will also streamline the code for launching servers
without a UI attached.
Based on a patch by Bogdan Marinescu <bogdan.a.marinescu@intel.com>
(Bitbake rev: f0b54280a6bce522508e4741e5f507bc284113a8)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The init function call was clobbering data hob relies on injecting, fix
this so the data injected by hob isn't overwritten.
(Bitbake rev: 64ca1aa1fd5f0473196b6cd805637fa644a92173)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Originally it seemed like a good idea to keep the parameters around. Having
seen this in real life use, its incorrect, we should pull all the data we need
into the cooker's configuguration and then use this to build the datastore.
Being able to just build the datastore from the parameters seemed like a good
idea but having a dummy cooker configuration object is now looking like
the better option.
This also fixes failures in hob since the parseFiles command can call
into cooker directly now and reset the configuration prefiles and postfiles
at will, rather than the indirect calls before which were breaking the datastore
(e.g. BBPATH wasn't set).
The cleanup this allows in tinfoil illustrates how this change makes more sense.
(Bitbake rev: f50df5b891bf318f12fc61c74adfcc626cc6f836)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Similarly to the execution context changes, establish better lifetime
management API of the class event handlers.
(Bitbake rev: 54e35a6cceead9521f8b1dacd48e55064e85c8bd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current execution context management for bitbake is ugly and the
use of a global variable is nasty. Fixing that is hard, however we
can improve things to start to establish an API for accessing
and changing that context.
This patch also adds in an explicit reset of the context when we reparse
the configuration data which starts to improve the lifecycle of the data
in setups like hob.
(Bitbake rev: 6c3281a140125337fc75783973485e16785d05a1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its confusing when an event handler in for example a bbclass receives
events for a recipe which doesn't use the class. This is due to the
class event handlers having confusing scope. Worse, the issue is not
deterministic and the events a handler will see depends on the parse
order.
To avoid these issues, remove the class event handler global scope
and only have class handlers recieve events for recipes using the
class.
(Bitbake rev: 7fb95f3d133e440d463d2faa7151c731f8e1ae96)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having a global method scope confuses users and with the introduction
of parallel parsing, its not even possible to correctly detect conflicting
functions. Rather than try and fix that, its simpler to retire the global
method scope and restrict functions to those locations they're defined
within. This is more what users actually expect too.
If we remove the global function scope, the need for methodpool is reduced
to the point we may as well retire it. There is some small loss of caching
of parsed functions but timing measurements so the impact to be neglibile
in the overall parsing time.
(Bitbake rev: 4d50690489ee8dc329a9b0c7bc4ceb29b71e95e9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to have a memory resident bitbake and to allow task execution, we need
to be able to rebuild the base configuration without a cooker. This moves the
code into its own class so it can be built independently.
The interface is less than ideal here but I didn't want to add parsing methods
a subclassed DataSmart, at least until we've experimented further with this code
and are certain that makes sense. At the very least, the methods are ugly and need
cleaning up. Spliting the code out seems to be the right thing to do though and
should unblock various activities on BitBake so I believe this code is a step in
the right direction.
Based on a patch from Alexandru Damian <alexandru.damian@intel.com>
(Bitbake rev: 22a0b3cf73d2689db0c118b37aa7492632f8b0a7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Building up a set of actions for the server is tricky since we depend upon the
commandline but fall back to values from the datastore. We should be able to build
a datastore without a commandline and vice versa. Ultimately the UI should send
the commands to the server.
This patch amounts to code rearranging, moving the heavy lifting to the UI, though
a helper in the configuration option. This will need further cleanup/tweaking but
this should be the only update needed to the UIs. The code now queries the server
for any missing data should it need to.
This code allows various knowledge of configuration variables to move to the UI side
only, partcularly pkgs_to_build but also all the command specifiers. It should also
be possible to move cmd eventually, I'm just unsure if any callers call the commands
expecting this to default to something sane right now.
(Bitbake rev: 2dbbb1d51dafd4451fef8fe16f095bcd4b8f1177)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the UI and server configuration is one big incestuous mess. To
start to untangle this we creater cookerdata, a new module which contains
various confiuration modules and the code for building the base datastore.
To start with we add a ConfigParameters() class which contains information
about both the commandline configuration and the original environment.
The CookerConfiguration class is created to contain the cooker.configuration
options. This means we can transfer new paramters to the server over something
like XMLRPC and then build a new configuration from these on the server.
Based on a patch from Alexandru Damian <alexandru.damian@intel.com>
(Bitbake rev: 35bd5997e8d8e74bc36019030cc10c560a8134f9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"status" is a relic of very early versions of bitbake, rename it to match what it now
means.
(Bitbake rev: db307fc68773868de2db614a061f51c5c6a90468)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
updateCache() gets called by command.py when needed and needs to be iterated
over. The calls in cooker.py are therefore just plain wrong/confusing now.
(Bitbake rev: 8b7c65bba466bb6773c56849074978ce2c956129)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its clear looking at the code the path argument has never been used and doesn't
work. Tweak the function to be a little more readable.
(Bitbake rev: d7047ceaf29b870ade3257e263e010f65aa8bc6e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Cooker class is too large and needs to be split up into different
functional units. Splitting out the collections code into its own class
seems like a good place to start to try and disentangle things.
(Bitbake rev: ca1fcbb6e214c155a05328779d3d326e10c5eac0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The <> operator is deprecated, replace with !=.
(Bitbake rev: 4a43e58dd97ec6ea304eaa727c030973a5bc91b7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Current if the PR Service fails to start, bitbake carries on regardless or
hangs with no error message. This adds an exception and then handles it correctly
so the UIs correctly handle the error and exit cleanly.
[YOCTO #4010]
(Bitbake rev: 949c01228a977c3b92bfc0802f6c71b40d8e05b3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
So that the information added to cache_extra could
be accesed by hob, new variables were added in
the cooker.py.
(Bitbake rev: f2d5f4ca9ac82599c74838844f7e54e481e023d3)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-extended cooker.py so that the extra information in cache_extra.py could
be used
(Bitbake rev: e6c2fa2f6669a4adf890a2ee794b100617223b7b)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reverting the pool changes, terminate does not work reliably on
bb.compat.Pool :(
[YOCTO #3978]
This reverts commit 8af519a49a3374bd9004864ef31ca8aa328e9f34.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reverting the pool changes, terminate does not work reliably on
bb.compat.Pool :(
This reverts commit 9ca8e513dc142dd7aefadeb6db2ccdb00f38b39f.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Multiprocessing catches these and handles passing them between processes
itself, we don't need to do it ourselves anymore.
[YOCTO #3926]
(Bitbake rev: 9ca8e513dc142dd7aefadeb6db2ccdb00f38b39f)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I've sent a patch to poky, with some changes in sanity.bbclass. When bblayers.conf
is updated, it updates also a variable to know when to reparse configuration files.
This patch contains the changes to reparse conf files, after a sanity check which
changes bblayers.conf.
[YOCTO #3213]
(Bitbake rev: 966e3e59ceb1c8b33b5881f291c148ea6513eda0)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Maintining hardcoded lists of user environmental variables is hacky,
replace these with the savedenv datastore. Allow access to that
through the BB_ORIGENV variable.
(Bitbake rev: 0a99563a4ea270594fd9a61da46f9387fb79dc66)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new command in bitbake to save a variable in a file; added a function
in cooker which is called by this command.
Added new command in bitbake to enable/disable data tracking.
The function saveConfigurationVar from cooker.py saves a variable in the file that
is received by argument. It checks all the operations made on that variable, using the history.
If it's the first time when it does some changes on a variable,it comments the lines where
an operation is made on it, and it sets it in a line to the end of file. If it's not
the first time(it has a comment before), it replaces the line.
Made some changes in hob to save the variables from bblayers.conf and local.conf
using the bitbake command.
[YOCTO #2934]
(Bitbake rev: 55b814ccfa413d461d12956896364ab63eed70a8)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds tracking of the history of variable assignments.
The changes are predominantly localized to data_smart.py and
parse/ast.py. cooker.py and data.py are altered to display the
recorded data, and turn tracking on for the bitbake -e case.
The data.py update_data() function warns DataSmart.finalize()
to report the caller one further back up the tree.
In general, d.setVar() does what it used to do. Optionally,
arguments describing an operation may be appended; if none
are present, the operation is implicitly ignored. If it's
not ignored, it will attempt to infer missing information
(name of variable, value assigned, file and line) by examining
the traceback. This slightly elaborate process eliminates a
category of problems in which the 'var' member of the keyword
arguments dict is set, and a positional argument corresponding
to 'var' is also set. It also makes calling much simpler for
the common cases.
The resulting output gives you a pretty good picture of what
values got set, and how they got set.
RP Modifications:
a) Split from IncludeHistory to separate VariableHistory
b) Add dedicated copy function instead of deepcopy
c) Use COW for variables dict
d) Remove 'value' loginfo value and just use 'details'
e) Desensitise code for calling order (set 'op' before/after
infer_caller_details was error prone)
f) Fix bug where ?= "" wasn't shown correctly
g) Log more set operations as some variables mysteriously acquired
values previously
h) Standardise infer_caller_details to be triggered from .record()
where at all possible to reduce overhead in non-enabled cases
i) Rename variable parameter names to match inference code
j) Add VariableHistory emit() function to match IncludeHistory
k) Fix handling of appendVar, prependVar and matching flag ops
l) Use ignored=True to stop logging further events where appropriate
(Bitbake rev: f00524a3729000cbcb3317fee933ac448fae5e2d)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This code adds inclusion history to bitbake -e output, showing
which files were included, in what order. This doesn't completely
resolve timing questions, because it doesn't show you which lines
of a file were processed before or after a given include, but it
does let you figure out what the path was by which a particular
file ended up in your build at all.
How it works: data_smart acquires a .history member, which is an
IncludeHistory; this represents the inclusion of a file and all its
inclusions, recursively. It provides methods for including files,
for finishing inclusion (done as an __exit__), and for
dumping the whole tree.
The parser is modified to run includes inside a with() to push
and pop the include filename.
RP Modifications:
a) Split Include and Variable tracking
b) Replace deepcopy usage with dedicated copy function
c) Simplify some variable and usage
(Bitbake rev: b2dda721262da8abb7dc32d019e18fbc32ed8860)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Till now, a custom image made in Hob was using only the packages from
the base image. Now it is using everything declared in the base image.
Also next to hob-image.bb, it creates another .bb file which is used
in building process. Those images are ignored by git.
[YOCTO #2601]
(Bitbake rev: 22007cf71a00fbb03b40f97201a6eb06c9aebd16)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The data returned by get_file_depends() may me used in contexts like
checksums where order is important. The current usage of sets means
that some of the checksums can change in circumstances they should not.
This patch changes to use lists, thereby removing the problem.
(Bitbake rev: a44285fc4109236ab89f7aad0a1fc9220eec19b6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"bitbake -e ASSUME_PROVIDED" should fail, but the error message wasn't
clear enough in the past:
$ bitbake -e bzip2-native
[snip]
ERROR: Command execution failed: Traceback (most recent call last):
File "/buildarea/lyang1/poky/bitbake/lib/bb/command.py", line 94, in
runAsyncCommand
commandmethod(self.cmds_async, self, options)
File "/buildarea/lyang1/poky/bitbake/lib/bb/command.py", line 323, in
showEnvironmentTarget
command.cooker.showEnvironment(None, pkg)
File "/buildarea/lyang1/poky/bitbake/lib/bb/cooker.py", line 325, in
showEnvironment
fnid = taskdata.build_targets[targetid][0]
KeyError: 0
[snip]
With this patch, the massage will be:
[snip]
ERROR: bzip2-native is in ASSUME_PROVIDED
ERROR: Command execution failed: Exited with 1
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
[YOCTO #3392]
(Bitbake rev: f31447dac92454c822d4ebb7dd48e96c6c69dde4)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dumping the environment data into the console log files directory is
invariably not what the user wants or expects and leads to confusion
when looking at the log directory.
This change forces the logs to be disabled by default when using
the -e option.
(Bitbake rev: 5d825b31d1133e41d3982db1b94f6a30a6fb99f7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make these a little easier to understand.
(Bitbake rev: 84ab874c8818484d37ee438aab27486fff497705)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the '-s' option is run, change the heading above the list of recipes
to say "Recipe Name" instead of "Package Name".
(Bitbake rev: d1c3a9de875fb488a56ab5cb1d2f8e2f24f31d69)
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When making filename comparisons for recipes for priority calculations,
we need to split off any virtual prefix. Without this, BBCLASSEXTEND
version of recipes don't follow the priority settings they should.
[YOCTO #2933]
(Bitbake rev: 055b72a230e6b0b1cababd65372c62d9ddce385e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If an exception occurs during handling another exception we were
getting a useless traceback such as the following, after which
BitBake froze:
ERROR: Command execution failed: Traceback (most recent call last):
File "/home/user/poky/poky/bitbake/lib/bb/command.py", line 84, in runAsyncCommand
self.cooker.updateCache()
File "/home/user/poky/poky/bitbake/lib/bb/cooker.py", line 1207, in updateCache
if not self.parser.parse_next():
File "/home/user/poky/poky/bitbake/lib/bb/cooker.py", line 1694, in parse_next
logger.error('Unable to parse %s', value.recipe,
AttributeError: 'exceptions.TypeError' object has no attribute 'recipe'
Fix this to print an actual traceback of the exception and exit
gracefully (well, as gracefully as possible under the circumstances).
The general fix for [YOCTO #2977].
(Bitbake rev: 675b237a284dff84e972546774b69e2f89afb360)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This removes some unnecessary tracebacks
(Bitbake rev: db0ff7b4d47fce8322dd2350a2b1a6f60ef61d25)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently parsing failures still allow bitbake to continue on and try
and execute a build. This is clearly a bad idea and this patch adds in
more correct error handling and stops the build.
The use of sys.exit is nasty but this patches other usage in this function
so is at least consisent and its better than the current situation of
trying to execure a half parsed set of recipes. There are probably better
ways this could be improved to use to stop the build.
(Bitbake rev: 22756e9c0f1da33ba2c6e881b214577a610b7986)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a recipe is skipped during parsing for whatever reason, check and
report this as an error rather than trying to use the data that is sent
back and failing.
Fixes [YOCTO #2976].
(Bitbake rev: a324df40243fa55ccc89fd5970d46f25330d0a0d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All calls to parseConfiguration set self.status and call
self.handleCollections() afterwards, so just do this inside
parseConfiguration() itself.
(Bitbake rev: 3c2322d8a6ce15e20adb07a61aa321d884a9bcca)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We really need to pass the finalised data store into the parser init function
(and hence the siggen init function). This ensures any value changes get
passed into the correct code.
(Bitbake rev: 19efc6081c15a59bb8f5aaf8478650a2732cafe8)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently if any parsing failure occurs, there can be a long list of
bbappends that are "dangling" based on the fact that recipes were not
parsed. This change firstly ensures the error counter is incremented
and secondly that the bbappends list is only shown on a completed
parse list.
(Bitbake rev: 358952f0d874b869d361bbd72a5ea317bf939cd3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is for giving the user a clear list to show which pkg would be
built, we have the "bitbake -g", but it is not easy to read for people,
it is for "dot". Improve the "bitbake -g" to also save a pn-buildlist:
$ bitbake -g core-image-sato
...
NOTE: PN build list saved to 'pn-buildlist'
[snip]
The contents of pn-buildlist:
busybox
shadow-native
pth
sysfsutils
qemu-helper-native
curl-native
ncurses-native
gdbm
xserver-xorg
linux-libc-headers
[snip]
[YOCTO #2404]
(Bitbake rev: 18aff925aece774d0172894e25584353519ca03f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If -f is specified, force dependent tasks to be re-run next time. This
works by changing the force behaviour so that instead of deleting the
task's stamp, we write a "taint" file into the stamps directory, which
will alter the taskhash randomly and thus trigger the task to re-run
next time we evaluate whether or not that should be done as well as
influencing the taskhashes of any dependent tasks so that they are
similarly re-triggered. As a bonus because we write this file as
<stamp file name>.taskname.taint, the existing code which deletes the
stamp files in OE's do_clean will already handle removing it.
This means you can now do the following:
bitbake somepackage
[ change the source code in the package's WORKDIR ]
bitbake -c compile -f somepackage
bitbake somepackage
and the result will be that all of the tasks that depend on do_compile
(do_install, do_package, etc.) will be re-run in the last step.
Note that to operate in the manner described above you need full hashing
enabled (i.e. BB_SIGNATURE_HANDLER must be set to a signature handler
that inherits from BasicHash). If this is not the case, -f will just
delete the stamp for the specified task as it did before.
This fix is required for [YOCTO #2615] and [YOCTO #2256].
(Bitbake rev: f7b55a94226f9acd985f87946e26d01bd86a35bb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When an ExpansionError occurs during parsing it is useful to know which
recipe was being parsed when it occurred.
(Bitbake rev: a2a8e8c9f5a1a30aacab696fd2b434939ee2c4e2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix a recent regression where we see the following additional error
after an error occurs during parsing:
ERROR: Command execution failed: Traceback (most recent call last):
File "/home/paul/poky/poky/bitbake/lib/bb/command.py", line 84, in runAsyncCommand
self.cooker.updateCache()
File "/home/paul/poky/poky/bitbake/lib/bb/cooker.py", line 1202, in updateCache
if not self.parser.parse_next():
File "/home/paul/poky/poky/bitbake/lib/bb/cooker.py", line 1672, in parse_next
self.virtuals += len(result)
UnboundLocalError: local variable 'result' referenced before assignment
(Bitbake rev: 1ae0181ba49ccfcb2d889de5dd1d8912b9e49157)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Yocto 2142]
Force to exit HOB when hob is parsing recipes, the bitbake doesn't stop.
It hangs on function BitBakeServerConnection::terminate in file
server/process.py:
else:
self.procserver.join()
It is waiting for the children process quit.
In stage of parse recipes BBCooker spawns Parser processes as many as
cpu numbers. When quit the Parser processes they make their internal
Queue to call cancel_join_thread() to avoid block but don't work at
this time.
So force to terminate the Parser processes.
(Bitbake rev: bebef58b21bdff7a3ee1fa2449b7df19144f26fd)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should always be passing full pathnames around within bitbake. If
a file was referenced as a relative path to the current working
directory, it might not get passed through the abspath call and
hence the cwd would not get added as a prefix.
This change adds a second pass at ensuring we only return absolute paths.
(Bitbake rev: 72fc62ca124a24e2dbe404a3c83a49608a7c7931)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Gathers a list of paths to have checksums calculated at parse time, and
processes these when calculating task hashes. Checksums are cached with
the file's current mtime. Thus, changing any local file in SRC_URI will
now cause the do_fetch taskhash to change, thus forcing a rebuild.
This change adds very roughly about an 8% increase in parse time (a few
seconds) and maybe a few seconds during runqueue generation, so a fairly
moderate performance hit.
Note that since paths are resolved at parse time, this will not force
a rebuild when files are introduced which would cause that resolved path
to be different - for example, where a machine-specific version of a file
was added without otherwise changing the recipe. This will need to be
handled in a future update.
Code to hook this into the signature generator was courtesy of
Richard Purdie <richard.purdie@linuxfoundation.org>.
Implements [YOCTO #2044].
(Bitbake rev: c993b7c457f8b7776e8a5dff253bfa0724bc2cae)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Inherit information could be used to judge if a recipe is image type
or not.
(From Poky rev: 203f112a84b3971dc71da3dc455fd054d1c16a12)
(Bitbake rev: fe52af99918f61abec8f779efb02926b713f2aac)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This means that statements that expand to more then one entry
such as:
CLASSES = "a b"
inherit ${CLASSES}
work correctly instead of trying to inherit a class called "a b".
(Bitbake rev: 2568e9ace6e6f483e1bf2a9ef2f4d8318d6c85b7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When calculating the image installation dependency, we need the
rdepends and rrecommends information of certain packages.
(Bitbake rev: 5eab31ad9e9431e27725dcefa38cbd7f2e37d394)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The parsing shutdown call can occur more than once. Currently
if this happens the code will hang. Add some code to prevent this.
[YOCTO #2039 partial]
(Bitbake rev: 7614c5bdcaf9d70614b4fad2ca02c7e6eaa92f1b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove part of the original logic that stores pkg dependency and pkg
recomends, which will not be used in Hob.
Add the judgement for preferred fn provider of a certain package,
which maps package name to its providing recipe name.
The above approaches correct the build dependency calculation,
and they also reduced the total depend_tree size, which speed up the
tree data generation time.
(Bitbake rev: d668eb1300b3b3115964e98127b1bef554caae17)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
fnid is an outer variable and shouldn't be overrided, change the inner variable
name from 'fnid' to 'id'.
(Bitbake rev: c6dc8d6310af22c95adb06c64339e7ec9eaeb315)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove the "resolve" parameter since the original resolve=False
option is no longer be used.
(Bitbake rev: dadce609149cfb09ecdc53bfe1f416a3f57a5033)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enable configuring whether "set +x" is added to all shell tasks rather
than forcing it; this is enabled by setting BB_VERBOSE_LOGS to 1.
(Bitbake rev: 659411b6bb30e1a8355afc1c29b8170a8f2b55ac)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added new variable BBINCLUDED indicating the file dependency
information. It exposes the internal variable '__base_depends' and
'__depends'.
(Bitbake rev: af524a656fce32d01687481b86c31bef00eb9fc3)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we find an error in the layer configuration (such as an unsatisfied
item in LAYERDEPENDS) then exit by raising an exception at the end of
handleCollections() (without producing a backtrace).
(Bitbake rev: c7486a09310fe63b1aa1b7b0bb9450f306b6093b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The changes include:
- Clean some events in event.py
- Fire essential events for Hob2 to handle with more information.
- knotty changes
(Bitbake rev: 9ede881620c501574f014e600cea6947ea908ac2)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently we have generateTargetsTree API, which is used to get
dependency information. However in that tree, there will be
"virtual/xxx" in depends fields. Therefore we add the resolve option
to replace it with its real providers.
Besides, for packages that provided by multiple recipes, we will find
their preverred provider.
(Bitbake rev: 28501612efdfc6ee47576cc90deb6e897883e7f5)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously we use the file time stamp to judge if a cache is valid.
Here this commit introduce a new method, which calculates the total
hash value for a certain configuration's key/value paris, and tag
it into cache filename, for example, bb_cache.dat.xxxyyyzzz.
This mechanism also ensures the cache's correctness if user
dynamically setting variables from some frontend GUI, like HOB.
(Bitbake rev: 1c1df03a6c4717bfd5faab144c4f8bbfcbae0b57)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ensure that a file and line number are reported for ParseError where
possible. This helps particularly in the case of inherit and require
which previously did not report either of these upon failure.
(Bitbake rev: f588ba69622a2df35417ced184e56c79ac1b40d5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes a regression introduced in BitBake rev
c9f58ef6b897d3fa5b0d23734b5f2cb3dabb057a which prevents errors during
parsing from being fully reported because BitBake shuts down before it
can print them. Move the error printing to before the shutdown in order
to fix it.
Also remove a couple of superfluous calls to sys.exit() since these
will never be called (as self.shutdown(clean=False) does this itself).
(Bitbake rev: 356c42ed00541dea2c382c57f768a4f431d22db0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building the universe target:
* Show a warning about universe likely producing errors
* Multiprovider errors are now shown as warnings
Also remove an unused "error" variable in runqueue.py.
Fixes [YOCTO #1936]
(Bitbake rev: 293c796e8a3d1f74ca1e51017b6dede261612281)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The number of threads is self.num_processes - 1 due to the range(1,
self.num_processes). Fixed by changing to range(0, self.num_processes).
(Bitbake rev: adc041fd9e3def29cdf9c1ae4849c5383bac46e5)
Signed-off-by: Caleb Crome <caleb@signalessence.com>
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes the hang issue encountered with parse errors. The underlying issue
seems to have been the pool.terminate(). This sends SIGTERM to each of the
multiprocessing pool's processes, however, a python process terminating in
this fashion can corrupt any queues it's interacting with, causing a number of
problems for us (e.g. the queue that sends events to the UI).
So instead of using multiprocessing's pool, we roll our own, with the ability
to cancel the work. In the very long term, the python concurrent.futures
module introduced in python 3.2 could be used to resolve this as well.
(Bitbake rev: 7c39cfd8e060cca8753ac4114775447b18e13067)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without it, we get random hangs on parse failure. With it, some folks have
seen hangs even on successful cases. The former is clearly less problematic.
This is temporary, until I can finish investigating the root causes of both
issues.
(Bitbake rev: db689a99beffea1a285cdfc74a58fe73f1666987)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the addition of new cache domains, the summary, license and section
information is no longer requred in the core cache since its only used by
the hob UI. This patch removes the duplicated entries.
It also adds the DESCRIPTION field to the cache for the benefit of hob2.
(Bitbake rev: 33ffb2e99825cb643b148b3462c2d4cf33ff5f58)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make the following improvements to the show-overlayed subcommand:
* Show recipes that are overlayed when the version is higher or lower,
not just when it is the same. This gives a much better picture of the
influence each layer is having over the metadata used for building.
This can be disabled with the -s option if you just want to see
recipes with the same version as before.
* Default to showing name (PN), layer and version rather than the full
path and filename. The old style formatting can be used by specifying
the -f option.
* Mark skipped recipes as such in the output, and print them in the
correct sorted place in the list rather than at the end
* Prefix/suffix title line with === so it can be filtered out easily in
shell scripts if desired
(Bitbake rev: 43b473275d3cb2e60a14e4a52cdc4654b3f4e5e7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By calling init_parser which sets up the siggen code after the ConfigParsed
event is fired, we can allow the metadata to add siggen classes which
was always what the code intended.
(Bitbake rev: 69fd5ad4a8402fab5eb8348260966b337c5648ff)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids some silent parser hangs we were seeing which were
near impossible to debug as no user feedback was given.
[RP: Tweak commit message]
(Bitbake rev: d104f29871c04a5a36600a35b2568b49e5b21ca0)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove the error logged within cooker summarising the list of failed
tasks, and instead print this in the UI (knotty) where it belongs. This
also adds the actual name of the task that failed as well as the
corresponding recipe file that was being shown previously.
In addition, reformat the summary messages more tidily - no extra breaks
between lines and use correct English singular/plurals, with some
allowance for future translation.
(Bitbake rev: cdf69913f99d28bc7f51067a60257701f952c6cb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Improves error output for matching problems when the -b / --buildfile
command line option is used.
Rename MultipleMatches exception to NoSpecificMatch (as it is also
raised when there are no matching recipes) and make it inherit from
BBHandledException so that it doesn't print a stack trace (we always log
an ERROR prior to raising it.)
In addition, improve the formatting of the error message - only call the
log function once rather than once for every match, and use a more
appropriate message if there are no matches.
Fixes [YOCTO #1141]
(Bitbake rev: 803550a5098ec878164245e71344c3d687310b72)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1126]
A local PR service will be started and stopped automatically along
with the bitbake invocation/ternimation.
This local PR service will be started only and if only when the
PRSERV_HOST is set to 'localhost' and PRSERV_PORT is set to '0'.
When started, the sqlite3 database is stored at
"${PERSISTEN_DIR}/prserv.sqlite3" or "${CACHE}/prserv.sqlite3".
(Bitbake rev: 9d8f45407c67ed0d3c4f820cf646de3c385067c7)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no direct use of command in cooker.py, and it is using
bb.command instead. Remove command in the import list.
This fixes a problem of embedded import between command.py and
cooker.py.
(Bitbake rev: c353316b2efcc7a893d6b4aa9a9647d51a6f69e3)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no direct use of command in cooker.py, and it is using
bb.command instead. Remove command in the import list.
This fixes a problem of embedded import between command.py and
cooker.py.
(Bitbake rev: 92fec2788e33d301cc63848901bc6adc764a2ecf)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
initCooker is to set the cooker to the initial state with nothing
parsed.
(Bitbake rev: 8ee9c6cc47938604268242d90bd3007218f9a36e)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For buildTargets function, we use bb.configuration.data as parameter
to inject events, since in hob environment, some variables are
modified dynamically and bb.configuration.event_data may out of date.
(Bitbake rev: 487a124942fd5cd9de71413b79a4049a6d26f1e8)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The assignments of self.configuration.cmd in BBCooker seems duplicated,
have the followings in both BBCooker::__init__ and
BBCooker::loadConfigurationData:
if not self.configuration.cmd:
self.configuration.cmd = self.configuration.data.getVar("BB_DEFAULT_TASK", True) or "build"
The __init__ invokes the loadConfigurationData, and it would make sure
that self.configuration.cmd has been assigned a proper value, so we can
remove the one in __init__.
[YOCTO #1791]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using bitbake -e -b virtual:xxxx:/path/to/the.bb would result in
zero matches since the virtual:xxxx piece wasn't being processed.
This adds in the necessary functionality to handle it correctly.
[YOCTO #1793]
(Bitbake rev: bd5a727c8447bcb747c1d2463b7de2ab6d21a7de)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bitbake codebase makes assumptions that only one copy is active
against a given build directory at a given time. This patch adds a
lockfile in TOPDIR to ensure that is the case.
Note that no unlock is needed, that is automatically dropped when
execution terminates.
(Bitbake rev: 6004cbf36c980c2574c1c9153df81a7c55317e17)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake -s was not displaying correct version information when the
PREFERRED_VERSION string contains other variables. The actual built
versions would differ since the providers.py functions were called
with expanded keys at this point.
This patch expands keys for showVersions bringing everything into
sync correctly.
[YOCTO #1493]
(Bitbake rev: 3a0f2dda3c6de993f08ed50e9d513add9407339c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recent change which modified inheritFromOS to use the intial
environment, rather than the current environment, introduced a bug such
that variables which had been cleaned from the environment where still set
in the data store.
This patch changes things such that a list of approved environment
variables is saved after the environment is cleaned and only the variables
in this list are inherited in inheritFromOS.
CC: James Limbouris <james.limbouris@gmail.com>
CC: Chris Larson <clarson@kergoth.com>
(Bitbake rev: cb6c07054e8baf94614713ec257c643b22266d75)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Turn the reparseFiles logic into a command to reset the cooker's state
machine and a noop which triggers a cache rebuild.
The resetCooker command resets the cookers state machine such that a cache
update will be triggered by any async command which requires the cache.
The reparseFiles command remains as a noop async command that has the
needcache property set to True so that when called it ensures the cache is
built.
Patch from Richard with the addition of removing the force parameter from
the updateCache method.
CC: Richard Purdie <richard.purdie@linuxfoundation.org>
(Bitbake rev: a98f698fe9f38310024013e58475e6d1447ee154)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using the -e and -b options together an expection was occuring.
This was due to incorrect initialisation and this patch adds in the
correct initialisation calls.
(Bitbake rev: e7ade6dcd646b478df79f968934a0edcb63254f7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the requested configuration file is found on disk check the
against the configuration files in __depends/__base_depends to ensure the
file was parsed before emitting the ConfigFilePathFound event.
If the requested file wasn't parsed just return (and don't emit).
Fixes [YOCTO #1246]
(Bitbake rev: 705d14d1e1108e0544c7eab827f1242f0839add9)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The include parameter to _parse() tells the parser whether to include the
file in __base_depends, the contents of which have their mtime tested to
invalidate the cache when they have changed.
As I understand it we would want all of the configuration files that are
currently handled with the _parse() method to invalidate the cache to set the
default value of the include parameter to True.
(Bitbake rev: 5cacdc4f1641eda1b5707c96f7c40924a9db6174)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"Nothing PROVIDES" errors often come up when a recipe has been skipped
for some reason, and therefore it is useful to print out that reason
information when showing the error so that the user understands why the
error has occurred.
Given that we already feed the reason information into the skiplist for
various situations (COMMERCIAL_LICENSE, COMPATIBLE_MACHINE etc.) this
should now output a useful error message for skipped recipes.
Fixes [YOCTO #846], [YOCTO #1127]
(Bitbake rev: 6765218430e31c165888f26fbc75023c89a6eab2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The rdepends-pkg field of the generated depend_tree model was not populated
in the original implementation of this method, this series adds in the
loop to populate the rdepends-pkg column of the model.
(Bitbake rev: 4f9a6f6f43cf2ef38115285897fbbde01964e892)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A list can contain the same value twice, therefore only append to the
appendlist for a recipe if the append file is not already in the list.
(Bitbake rev: d11f9dd33cdcc97a4a937e8bf7e97558d813cadd)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that we have a pristine copy of the variables available at launch time
we can use them when looking to inherit the OS's environment.
(Bitbake rev: 21c21fcc5871e81d8d497b6baed605cdd74c4571)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create a data store in the cooker containing the values of the environment
from when BitBake is launched such that child processes can replicate
(and/or use values from) the host environment, rather than the cleaned up
environment that the main BitBake process uses.
(Bitbake rev: 54c7206165c0e7cfe5f7b243c80461baf5e7dfb1)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Too many people are using -b because they think it is the normal way of
specifying a target to be built, and then get confused when the build
fails due to a missing dependency; so show a warning about dependencies
not being handled when this option is used.
(Bitbake rev: c470f3f36aef24c46d9722593422286340be296b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since Hob only needes package dependency information, we can
create a new version of package information retrieving methods,
remove task dependency information, so that we can greatly
reduce data loading time for Hob
(Bitbake rev: df55199209ef042e5b1ca04c4df75c7d639b51eb)
Signed-off-by: Liping Ke <liping.ke@intel.com>
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The cooker methods which fire FooBarFound style events should only fire the
event when an item was actually found, rather than each time the method
is called.
Fixes [YOCTO #1219]
(Bitbake rev: 5c8eeefc79455f058dda8f04cf4c12dc5418e00f)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the return result of "getCmdLineAction" to a dictionary
{'action', 'msg'} to allow the individual UI decide how to handle the
cmd line parsing result.
(Bitbake rev: 521909d1350a415d19516aa1710041e30950c7cc)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently if a user adds a new .bbappend file to the system, the cache still
thinks the cached data is valid. This code fixes that to ensure additions and
changed in append application order are accounted for.
[YOCTO #1091]
(Bitbake rev: 54fe91fe96aaae47c40077c5f441c79da71da777)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch moves the logic of show_appends_with_no_recipes from bitbake-layers
into bitbake. By default, a fatal message is printed; we can also define a variable
BB_DANGLINGAPPENDS_WARNONLY to make the message only a warning(the variables
could be defined in conf/local.conf with a value "yes", "true" or "1").
(Bitbake rev: f5ba7c795df7cbd58124e35970ddc5bd84cbfb8e)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implement (optionally versioned) dependencies between layers, and if layer
priorities are not specified using BBFILE_PRIORITY_layername (now
optional) then work out the layer priority based on dependencies.
Define LAYERDEPENDS_layername in layer.conf to specify the dependencies
of a layer (list of layer names, split with spaces in the usual way);
LAYERVERSION_layername can be defined for each layer allowing specific
version dependencies to be specified via depname:version in the list of
dependencies. An error will be produced if any dependency is missing or
the version numbers do not match exactly (if specified).
Note: default priority if unspecified for a layer with no dependencies is
lowest defined priority + 1 (or 1 if no priorities are defined).
Addresses [YOCTO #790].
(Bitbake rev: 115b89fa279b64e79da0f72caf7b30965a83fab1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recipes that have been 'overlayed' (where there is a recipe in another
layer where that layer has a higher priority) are now listed within
cooker.overlayedlist for use in bitbake-layers. This is a dict with
keys of the topmost (highest priority) recipe file.
(Bitbake rev: 370fc603d79f9c34cc23b4b520b685256c23df5d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Useful if you want to load a configuration file that sets values which may
also be set in bitbake.conf or one of the files it includes.
(Bitbake rev: a8246ae5400c23df0d3ee29c36f4d9f257d1e6d1)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the caller doesn't specify a pkgs list we want to generate the tree of
all available packages. To do so use the new universe target list.
(Bitbake rev: 26b0c538ad4f677e0d45a66484c2dca073459282)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The generateTargetsTreeData() and generateDepTreeData() functions perform
are essentially the same function only creating slightly different data
structures. Instead of duplicating non-trivial code drop
generateTargetsTreeData and instead have an optional boolean argument which
defaults to False for generateDepTreeData() which has it include the extra
fields required for the targets tree.
(Bitbake rev: 3e38ea4e5748473740821b6e10c8477c08ab45e2)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This command can be used to search each BBPATH for files in the passed
directory which have a filename matching the supplied pattern.
This is implemented for use from the GUI (to determine the available
PACKAGE_CLASSES) but has been written so as to be generically useful and
reusable.
(Bitbake rev: 2a599812a57cb0b964880a6a2b7548423497ea92)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This takes the name of a .conf file and returns the full path to it
(Bitbake rev: 22c8600b885faf841795b872d82f68dfb644a26e)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Convert _findLayerConf(self) to _findConfigFile(self, configfile) so that
the core functionality of the method can be used elsewhere.
(Bitbake rev: c515b76c3a27d57d5ae8dddf15cc836811b24ee1)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modify the generateTargetsTree command to allow a list of packages to be
supplied by the caller, in this case we will only generate a target tree
for user requested targets rather than building a tree for the world list.
(Bitbake rev: d4e4f2ecae96e074b2ab3bb9882037af2e385fdd)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update exception handling syntax to use the modern style:
except ExcType as localvar
(Bitbake rev: dbf5f42b06bef81749b13aa99945cc1292a6676d)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add skiplist to cooker that allows access to the list of packages skipped
via SkipPackage (this includes COMPATIBLE_MACHINE, INCOMPATIBLE_LICENSE,
etc.) This can be used to enhance error reporting.
(From Poky rev: 6c12b7b1099c77b87d4431d55e949cf7c5f52ded)
(Bitbake rev: 7d2363f35350be27a33f568c23eb07fcd3d27e53)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
At best it gave 1-2% improvement now, its 32 bit x86 only and isn't
supported after python 2.6.
PyPy is probably a better option now.
(Bitbake rev: 3c3bd0c2fa80d747f25401c17b785c7c2f3787ca)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ideally we'd avoid direct BBHandler usage, but honestly, to say the whole
bb.parse abstraction is incredibly leaky is an understatement. If we try to
make handle() not reparse classes, things get ugly fairly quickly, as
inherit() calls handle() itself after adding the class to the inherit cache.
This change fixes it so we no longer risk reparsing a class if:
- it's listed in INHERIT multiple times
- it's listed in INHERIT and is 'inherit'ed from a class in INHERIT
(Bitbake rev: 057c3cddeb72584c6c3908bd702288cece9b66ea)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If all our recipes were cached, there's no reason to fire off any parsing
progress events at all.
(Bitbake rev: e9e174e5781fc3de4dfd60d01228048a06a62b16)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now we use bb.exceptions to pass pickleable traceback entries to the UI, and
the UI is free to do whatever it wants to do with this information. By
default, the log formatter for the UIs formats it with bb.exceptions. This
also means that all exceptions should now show 3 lines of context and limit to
5 entries.
(Bitbake rev: ee48d628ee038bd72e1cd94aa75f5ccbacbcee4c)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Note: we rely on the fact that better_compile has already output information
about the exception, so don't do it ourselves.
(Bitbake rev: caf21e9fbf3c526c1d7c555d8c76dca8710f9def)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Uses bb.exceptions to get a traceback back from the parsing thread to the main
thread, where it is then formatted. Also enables 3 lines of context for the
formatted traceback, and limits the number of entries displayed to 5.
(Bitbake rev: 8c33f50eb68411c071c001331e0134aeb776953b)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create a standard format server class instance with method calls
for each step in the server setup. There should be enough hooks
for each of the different server types.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is to support extra cache. If user needs to request
extra cache fields besides CoreRecipeInfo fields, just add a new
XXXRecipeInfo class definition as Hob Does.
Currently supported Extra RecipeInfo name is an array. We can
support multiple extra cache fields at the same time besides
CoreRecipeInfo which is needed by all clients.
(Bitbake rev: 077657e50ad032c0fa876bf54e9802af2686e0fb)
Signed-off-by: Liping Ke <liping.ke@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
