The YP Development Manual had some build host preparation steps
as part of the chapter that talks about getting a host ready
for using YP. These steps are better suited in the BSP Guide.
I moved them there and filled out the steps to be more complete.
(From yocto-docs rev: 2277812d0dd411a103a4a4252d4cb90c471901c9)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the introduction of CROPS as a way to set up the build
system, I had to alter the first bullet of the BSP workflow
list and the figure.
(From yocto-docs rev: f1db3db4053142619c62629d4b05023f0b148e6c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I did some rewriting for clarity in the "Using .bbappend Files
in Your Layer" section. The section needed to be retitled so
focus on the layer aspect of .bbappend files. Also, while I
was in there, I did more work on the prose in general.
Also had to fix some links in the bsp, kernel, and ref manuals
that linked into the section whose name I changes.
(From yocto-docs rev: a82bcc9fe0f909135434ee1bd36b4414f6c046c9)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
Moved the section on BSP Development workflow from the dev-manual
into the bsp-guide. This procedure needs to live in the BSP
guide.
Many links had to be fixed.
(From yocto-docs rev: fbf06240f83221929aea237660146e0076207f6a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
The chapter on setting up YP has been completely re-written to
move towards a "how-to" manual. This involved touching every
aspect of the chapter. All subsections now have procedures
surrounding set up stuff. There are some development sections that
still need fleshed out.
Many, many links and references in other chapters were affected.
These have been fixed.
A couple style-sheet (*.css) files were also updated to support the
"writernotes" style, which renders paragraph text in red.
(From yocto-docs rev: c4c2a6cf575ce5c783b1cc84d9f7e961aebef49c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
I changed the section heading for the section that describes how
to make a change to the YP. It was passive. I need it to be
active and in line with the "how-to" dev-manual.
(From yocto-docs rev: 340e1b6ab9806ec11ec894d4472bc2c937c2b058)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
The "Git" section in the dev-manual is really about concepts.
There are a couple of examples that might or not might be
allowed to ultimately stay. I have moved the section to the
ref-manual. If those examples get replicated in the new
dev-manual, I will update the "Git" section further. For now,
however, these remain in this moved section.
(From yocto-docs rev: 2e4b87fdab29c13ce0d2314e50c93e37404b6f7e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
The "Yocto Project Source Repositories" section is purely conceptual
and thus does not belong in the reconstituted dev-manual, which is
converting to a "how-to" manual. I have moved this section to the
ref-manual under "The Yocto Project Development Environment" section.
Moving the section affected several things. Three figures that where
in the dev-manual were copied and moved to the figures folder of the
ref-manual. This required deleting them from the dev-manual and
adding them to the ref-manual.
The makefile had to be edited to move those figures into the ref-manual
and delete them from the latest version of the dev-manual in order for
the tarball of files to be correct when the manuals are made.
Links to anchors within the moved section had to be fixed in various
manuals. Links to the main section "id" had to be fixed to point
to the ref-manual manual.
(From yocto-docs rev: c619ae2bbc6be93cb0324ca44e936eefec12b28c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
Moving the "Yocto Project Terms" section from the dev-manual
to the ref-manual broke the links to the "Metadata" term.
I fixed these.
(From yocto-docs rev: 190da4b4d44952d141db26ca72b5bc1a52d77023)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
Moving the "Yocto Project Terms" section from the dev-manual to the
ref-manual broke several links to the id "build-directory". I fixed
these to reference into the ref-manual now.
(From yocto-docs rev: debe2ae8ce203ebe0f1cee0de54124c15df8bb7e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
Moving the "Yocto Project Terms" section from the dev-manual to
the ref-manual. Doing so caused all the links to the id
"bitbake-term" to break. These had to be individually fixed.
Discovered two unresolved references that were a consequence of
moving that section to the ref-manual. These were fixed as well.
(From yocto-docs rev: 829ca6b64562f00a69f3956e9636c7edaa90ce16)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated poky.ent to use 2.4 variables and numbering
Updated mega-manual.sed to use "2.4" string for links
Updated all manual revision tables to use "2.4" and
"Usually October, 2017" string.
(From yocto-docs rev: 17ec7da6ab3fd450c2010812f7ad689288b12dcc)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10946]
There was insufficient information in the combination of the
BSP Guide and the Kernel Development Manual on just how to locate
and use kernel metadata.
* bsp-guide - Removed the detailed append file example for the
kernel recipe. This is moved now to the chapter in the kernel
manual that describes append files.
* kernel-dev - Placed the example from the BSP Guide into the
section that describes kernel append files. Cleaned up some
terminology issues throughout chapter 3. Added information
about how BitBake picks up kernel metadata when the metadata
is in a hierarchical directory and not just a simple *.scc
file.
(From yocto-docs rev: 1048acb7127e77ca9c1f524a208fe25344fcb57c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
poky.ent - changed the "tbd" and "TBD" strings to "pyro" and
"Pyro", respectively.
Manual Head Files - Updated the manual history table with the
May release month.
(From yocto-docs rev: 076226d2986d0cf69685121e4342f50c1603fc7b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10076]
The note on the title page for each manual was brief regarding
where to find the latest version of the manual. I updated the
note to have more detailed information on finding current,
alternate, and latest versions of the manual based on YP
releases.
(From yocto-docs rev: 0ec81465296a7a78309d3039af4d00caa52d2285)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes to the following:
* All manual revision tables to indicate a 2.3 release proposed
for April of 2017.
* Updated the poky.ent file so that all variables needed reflect
2.3 values.
* Updated the mega-manual.sed file so that processing of links in
the mega-manual work for a 2.3 release.
(From yocto-docs rev: 926e282c17b67c79b94a0b62a0b18bfbe0b26c40)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10385]
The output was incorrect for the default kernel type. In the
Krogoth branch, the output uses 4.1 and the text indicates 4.4.
In the master branch it was the same as well. This commit fixes the
master branch to use the default 4.8 kernel in both the example output
and the text.
(From yocto-docs rev: a76d1cc91883dcd58743f2cd2626917e51419cb1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added string "October 2016" as the release date.
(From yocto-docs rev: db40986677746afbbb138d9cbe3885111550b7c5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Updated poky.ent to have the appropriate 2.2 variables
* Updated all manual revision tables to have a new entry for
2.2 - used "Sometime in 2016" for the date.
* Updated the mega-manual.sed file to process internal links
for 2.2.
(From yocto-docs rev: 2acd49ee197e3e3e725f4cb8cc432437afd8646b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Occurrences in many manuals and one figure.
(From yocto-docs rev: 26d30cd162083c62216fb4ab526d0b231f453de1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated to "April 2016" for all manuals that use this table.
(From yocto-docs rev: 4d3753cc92c446668b0c383736c2071e24e53dd2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Probably should have committed these separately but....
* Updated the BSP guide to use an example that we support.
I removed the eMenlow stuff completely.
* Fixed poky.ent so the 15.0.0 stuff is used for the variables.
This supports the 2.1 release.
(From yocto-docs rev: 598b261725235b6f160561db22bd9f31ec721066)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hob and the packageinfo class have now been removed from the
code base. This patch removes all references to:
* Hob
* meta-hob
* packageinfo and
* BBLAYERS_NON_REMOVABLE
from the documentation.
So long, Hob, and thanks for all the fish.
(From yocto-docs rev: 6a1ba2761d5c2ec1072616ce3d791787f1b1b2a7)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the license statement to not be "non-commercial".
(From yocto-docs rev: bb1d80c121e9e34090a07feac9d510b2304f058e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The changes are for the poky.ent file and the mega-manual.sed
file to take care of variables. Also, entries added for the
manual revision table.
(From yocto-docs rev: 60da39f85165e2d4aef55d456f8203183e089433)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These updates included editing the poky.ent file so that
DISTRO and related variables are now 2.0. Also updated all
the title pages to have the manual revision table correct.
Finally, used my email for the manuals.
(From yocto-docs rev: deae61bfbb528ea0ced82399a78260a7f34a7a11)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The customization layers were pointing to Sourceforge site for the
XSl files needed to build the manuals. Throuhgout time, this site
has failed me enough to warrent trying to get these XSL files from
some other source. Rather than ship the XSL files with the YP release,
we decided to create some mirrors and point the customization files
there.
(From yocto-docs rev: 4fd1703870694dff1f593b421f90aad0803d9e65)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A link was going to an old YP page that talked about patch
style guide stuff. That page simply redirects the user to a
styleguide of the OE. I fixed the link in the manual to go
directly to that page now.
(From yocto-docs rev: 913c30eae42e89cc6f8dd99026594c2843985c58)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This involves the following:
* Inserting a new row for all manual revision history tables
to have "October 2015" and 1.9 as the release information.
* Updating the mega-manual.sed file to process links for 1.9
* Updating variables in poky.ent to deal with the 1.9 release
variables.
(From yocto-docs rev: 1ed55c08b96cf0fded38833635111a5c6da86781)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The docs are not building on CentOS and we think it is due to the
XSL templates being called for the Eclipse parts. I located all
the "current" templates and switched them out for "1.76.1" version
as are used by the mainstream doc builds.
(From yocto-docs rev: afbddde6524630433dfec973bbe886de32395bc8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tweak a number of doc lines so that the KERNEL_FEATURES variable
refers directory to .scc files, and does not take advantage of
potentially confusing shortcuts.
(From yocto-docs rev: 6236fb098fc2d518f6f4f63e16b19a06a775d2d6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Version 1.8 drops support of the 3.10 and 3.17 kernels. The
emenlow example was using the 3.10 kernel recipe as a showcase
and it also listed the recipe in the directory structure. I
removed it. Additionally, the yocto-bsp create command was
prompting for the user to accept the default 3.17 kernel. I changed
that to 3.19.
(From yocto-docs rev: 03bf66e961400b27b7e31d4a25776a11ce5719fd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using the 1.76.1 version in all the customization layers so
the manual revision tables will build with boxes.
(From yocto-docs rev: 85a31ef53a59d17bed23ebf57a14db507eb21338)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This note provides a bit of a warning or tip regarding naming
BSP layers. The letter of the law dictates that you don't
need to prepend a BSP layer name with the string "meta-".
However, scripts exist in OE where the naming convention is
assumed.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 0375349fdd3cd5ff8a54db8124d5cdc02133ff12)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Crown Bay is short on life so I swapped it out for the eMenlow.
(From yocto-docs rev: 6d5394c12a374463cb1d5215af88178b63a5b8c0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The yocto-bsp and yocto-kernel tool output for the examples
were updated to be current.
(From yocto-docs rev: a05b1df35c7518027b1eb73f9ea2b6a3d00dca43)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I need to get back to how it was working and then fix the table
box issue from there. Using the 1.76.1 stylesheets makes the
build too long for the manuals and sometimes the XSL sheets do
not load.
(From yocto-docs rev: 7bc502fa069fdc4aebf5705513bb82127716859f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The way the explanation for adding the BSP-specific files did
not take into account for layers that might support multiple
machines versus a layer not supporting multiple machines. I added
more explanation that covers both scenarios to be clear.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 3f00f0bb830665f8711c68aa6110b8399e867345)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Crown Bay BSP now only supports VESA graphics. Because of
this, some of the examples in several areas of the BSP hierarchy
were wrong. Changed accordingly.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: b61f013a086a9135a86eedf2884fd1b07f798165)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the choices and version numbers of the "yocto-bsp" section
of the BSP guide to match the current development utilities.
(From yocto-docs rev: 0f8472ffa2bc3ae762587c4e2345a4d9850608ed)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The directory structure no longer seems to support two flavors
of the BSP: one with EMGD and the "noemgd." Only the "noemgd"
remains. I have updated some of the examples here to reflect
the current directory structure and sample configuration code
for the BSP.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 64fc4a7a6d69eb99dcd3d8c5e388810e7052ad75)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes the issue where the lines for the manual revision table
are not appearing. For some reason they do not appear when building
the docs using Ubuntu 14.10 and the "current" XSL transformation
files. So, I backed up to the 1.76.1 version, which is the nearest
version where the issue does not surface.
(From yocto-docs rev: 82b15986b97b9ed082b652b562eaaf843572fdff)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the example that creates a new BSP layer by using the yocto-bsp
script, the final step 6 could be interpreted as the script
creating the new layer in "poky". Even though the sentence is
technically correct, sloppy reading could mis-interpret it. I updated
the sentence so that nobody will be confused.
(From yocto-docs rev: 7c2bed2aa6f8c189ed9cabff6e4d4d9557238702)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added an entry for the 1.8 release stating that the release
is slated for sometime in 2015.
(From yocto-docs rev: 9799a7848f24024048eae0cbed470a2be4b4b879)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added "October 2014" to table for all manuals that have the
table.
(From yocto-docs rev: 3f9ceb4dd2397fe907bf701c842277eb65d11a56)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added several cross-link references for the LICENSE_FLAGS and
LICENSE_FLAGS_WHITELIST variables. Note that the cross-references
previously put in for LICENSE_FLAGS were slightly wrong as they
were using the <ulink> tag instead of the <link> tag.
(From yocto-docs rev: dc2769c63d24d3650c993cfd48bcb4540ad36ca2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed to add several links to the newly described
LICENSE_FLAGS variable in the glossary. Three links added to the
ref-manual and a single link added to the BSP Guide.
(From yocto-docs rev: 2ca6e556c299814d6ef847ed059a4f0a2d48adb3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5772]
Updated each manual's CSS style sheet to contain a style for
how the permalink symbol looks on its own and how it looks
when a user hovers over it with the mouse.
(From yocto-docs rev: c8d4afa0b83a40ac2de0c47c191a11b3e7d241e5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6430]
The style sheets were carrying over old .PNG files that are not
part of the manuals. I have removed the statements that were
using them.
(From yocto-docs rev: 6e4fa419b9367ab5e34b9aa8010a24980416dc7d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I extended the section to mention where to find YP supported
BSP layers and a bit on how to get them via the link from the
Source Repositories web interface. Changes driven by community
input.
(From yocto-docs rev: 4c944bf33b7d642126c52efd313666270145ab50)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set the release date to April 2014.
(From yocto-docs rev: 2592bc968edeea941a92e6bdd321dd872745b78c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ran the tool and provided the actual machine branch output
choices.
(From yocto-docs rev: 5b78e70079e2c621221187d4419de2a2427efbc1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This example does not run as described. It said that the
setup script was run and the user would be in the top-level
Source Directory (e.g. poky). The script errors out unless
run from the poky/build directory. So I took out the requirement
of being in the top directory.
(From yocto-docs rev: 800e4001319cde3e665c0271fd5a19646fb2bd7a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was using an out-dated version of the
linux-yocto_3.10.bbappend file. The new version accounts for
both emgd and non-emgd configurations. I had to insert the new
listing and update some supporting text describing it.
(From yocto-docs rev: 97329a154e3dee44cb393d4a289fdcbb9f8adf07)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "require" statements changed from four to three.
(From yocto-docs rev: 36f4fe004e69cb7715d41787d4c22b39371f63b6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recipes-kernel structure had changed for the Crown Bay
BSP.
(From yocto-docs rev: 14ecfc7e676901a6d422f49b0170f27f6b46837f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2444]
Several areas affected by the reference BSP "beagleboard"
being replaced by "beaglebone".
(From yocto-docs rev: 2f02b570e1ebcf0469871b67a029b65fa8b285f2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I did not eliminate this variable but rather changed the description
to indicate that it has been deprecated and that the user should now
use a PR Service to do this stuff. There were several areas in the
YP manual set that used the variable in code. I just deleted those
lines from the code.
(From yocto-docs rev: 88a075e6306349e5f8c0d53b5288ef1e64956cd3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made sure that the first occurrence of each "BitBake" term linked
into the "BitBake" term as defined in the dev-manual.
(From yocto-docs rev: 83e6e43d13cf5447b8ef65836d532abbb1f8b15e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5857]
I had missed replacing the release date in the manual revision
history tables for the 1.5.1 release. It was still an estimate.
I have replaced with the actual date of "January 2014"
(From yocto-docs rev: fb9abe0df33a9b551d797ac1b72577931f5f8ce6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was inconsistent use of the way directory names were
handled throughout the YP documentation. I have scrubbed the
set and replaced many instances such as the following:
meta/<something> replaces /meta/<something>
poky replaces ~/poky (except in some very specific examples)
I basically got rid of leading slash characters.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: ae2e451ed8f61484d04b30017021912c4493a441)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5368]
Changes partially address this issue, which is the removal of
tarball installations for poky. The notes at the beginning of
the YP manuals suggested that the tarball version of a manual
might lag the version found on the website. Because we are
discouraging installing poky/documentation from a tarball now,
I have re-written the note to be generic and suggest simply that
for the most recent version of the manual associated with the
release, see the manual on the website.
(From yocto-docs rev: a5e96e7eb719e69bbcf2139af2e20230aedc4247)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated all six tables for both 1.5.1 and 1.6 releases. Both
entries need to ultimately be in the 1.6 version of the
manuals.
(From yocto-docs rev: ac1d2cc5686da142562cd674f7fa8908895a27df)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Placed the release month of October in for the 1.5 release.
(From yocto-docs rev: c0431b2b3115d9687dcb5d3ba37adf6bf4695867)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
YP 1.5 default kernel is 3.10. This is a change from 3.8 in
the previous release. This change affected several areas of
the documentation.
1. The BSP Guide had a crownbay BSP structure that did not
account for the new default.
2. The yocto-bsp tool output still asked for the 3.8 kernel
as the default.
3. The recipes-bsp section had 3.8 used and had some bad
listings that had to be changed.
4. The recipes-graphics section had 3.8 used and also had some
stuff supporting two versions of the graphics (emgd and
noemgd). I had to pull the emgd stuff.
5. There were miscellaneous spots in the dev-manual that were
referencing 3.8 as the default kernel. Particularly the
list that shows what kernel repositories we have. That needed
updating.
(From yocto-docs rev: 9826ce760884f2ce5a4eb72c6a731a85cd6f2b2b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Changed the variables in poky.ent to contain the "1.5"
string and the "tbd" string for the unknowns.
2. Updated the manual revision history tables so to replace
the 1.4.1 release entry, which should not be there, to the
1.5 entry.
(From yocto-docs rev: d03a09875b1fe0d244b7a7c1bde718319d95a8ab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Edited poky.ent to have 1.4.1 and 9.0.1 for release stuff.
2. Updated the manual revision tables to have a new entry
for 1.4.1 release.
(From yocto-docs rev: bd4058b98f93ea5fd5d878f24018ce78b8ce1a53)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I fixed this as pointed out by Robert.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 52eb7d8698ef643150ac0ce987677da7a654b3ea)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert read through the BSP Guide and noted several issues.
There were several typos, inacurracies for crown bay code,
out-dated kernel usage example, etc.
One change I had to make that was related was to fix two cross-reference
links to a re-named section. These links were the changes in the
FAQ chapter of the ref-manual.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: ae45df660ebf33105ebf5e60e606b0ec76eb9a6d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Release 1.4 requires the user to create an append file to the
new recipe init-ifupdown if they want to create their own
custom /etc/network/interfaces file. Previously, they needed
to append the netbase recipe.
Changes needed in the migration section of the ref-manual as
well as the exmaple used in the bsp-guide.
(From yocto-docs rev: 1903df0c21dbc018f0dbb4ce90eac192b428606b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Discovered a bad typo for the CONFIG_YOCTO_TESTMOD
configuration. I had a "K" in front of it making the
command throw an error. Fixed that.
(From yocto-docs rev: 9c25a69abb12fd2fd472a2b9435a30b2c9ac4f2f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This note is at end of the section on the yocto-bsp and
yocto-kernel tools.
(From yocto-docs rev: 91f33e356412b3d305393483770a4257a872e056)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied "Metadata" for "metadata"
Added a link to the section to help find maintainers.
Some re-wording.
(From yocto-docs rev: 7f40c4dac30d2f54cf09afeb51a5cc83ba0851e9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
