The chapter was not the best given the new nature of the manual. I added
better introductory wording.
(From yocto-docs rev: cb4695575c0105e0cd5e50c2132e98553babe147)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The original Yocto Project Quick Start is being retired for the
YP 2.5 release (sumo). I have purged all the various references
from the YP manual set and replaced them with references to the
appropriate doc. The references were mainly into the YP
dev-manual for setting up the host or for building an image.
There were a few references into the new "Yocto Project Quick
Build" document for overviewing manual-type references.
(From yocto-docs rev: 11c0ab693962f16f87f1e21f33dd5c6ca6a6f895)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
SDK manual title changes so the links into that manual needed updating.
(From yocto-docs rev: e59d1cb22d46b00e9413deb5c7a70a14be880dc1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated several files to change the title of the dev-manual from
the "Yocto Project Development Manual" to the "Yocto Project
Development Tasks Manual." Did some edits in the README and the
Makefile as well for completeness.
(From yocto-docs rev: 0278d6d3bb458af1cb04fbc3eed96dff12d19475)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the redoing of the YP website, it was decided that the manuals
could only reference into the top-level and the top-level/documentation
URLs of the website. I removed all references to areas such as
projects (e.g. Toaster, VM, etc.) and any other URL that was not
the top-level landing page or the documentation page.
(From yocto-docs rev: 2bd838f1a9fb2698bab098b13b76c8852853e0e7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
I updated both the introductory sections of the ref-manual and the
dev-manual. These need to work more tightly with the projected
YP documentation set.
(From yocto-docs rev: 6a28537d03fad8a53198edc7f9a6229f4e58e551)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I want this first section to be titled "Welcome" rahter than
"Introduction." It is more in line with the YP QS and the YP
ref manual.
(From yocto-docs rev: 113b82c589c93a33a2a956790668e8c0a28894ec)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
Moving the "Yocto Project Terms" section from the dev-manual
to the ref-manual broke the links to the "Metadata" term.
I fixed these.
(From yocto-docs rev: 190da4b4d44952d141db26ca72b5bc1a52d77023)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
The exhaustive list of useful links and references to other
YP documentation existed in the dev-manual. This is not the correct
place for this type of reference information. I have moved that
list to the ref-manual where it should be. The dev-manual now
simply provides a link into that section.
(From yocto-docs rev: eeceb597988134ced85aab4b9ddaeed923f17b03)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The YP doc set was using a link to an out-dated video that
showed how to configure and run Eclipse. The video was very
old and Jessica suggested just removing it. So, I replaced
all occurrences of the link to the up-to-date appendix in the
SDK manual that provides information on the latest supported
version of the Eclipse IDE.
(From yocto-docs rev: b4af1a79078352df5558e20c0b9cfa97fa141abc)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Removed some eMenlow stuff
* Cleaned up the description of the BSP structures we have now.
* Various links fixed into the SDK manual.
* Other minor fixes.
(From yocto-docs rev: 5e45005d7ff2254df2754a5ea2d7efd7f1c19a42)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hob and the packageinfo class have now been removed from the
code base. This patch removes all references to:
* Hob
* meta-hob
* packageinfo and
* BBLAYERS_NON_REMOVABLE
from the documentation.
So long, Hob, and thanks for all the fish.
(From yocto-docs rev: 6a1ba2761d5c2ec1072616ce3d791787f1b1b2a7)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When you "make" the mega-manual, there were four tags across the
various manuals where the same string "id='intro'" occurred. This
causes warnings during the make process. I updated the strings to
be unique. There are no cross-references to these so no collateral
issues were caused.
(From yocto-docs rev: d0e770e0ad797031a75e2373a41723408b4b051c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #641]
Added a new bullet to the list that overviews what the manual
covers.
(From yocto-docs rev: 54bdb50df3951346a2e926700681db55bd59a2e1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a bogus link in there to the Build Appliance page.
I also noted many links that use the <ulink> tag that crossed
multiple lines. That is not good. I cleaned all that up.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: a39cea47cae29d7efb8e12495e8eefb484d464c4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add in a few links to member orgs, and update the BitBake link.
(From yocto-docs rev: 481c89e9b8e219358db8bfdfff0b5b0150247c07)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I fixed a few things as part of the read through prior to the
1.6 release. In particular, I added the link for the BitBake
User Manual, which is now published alongside the YP manuals.
(From yocto-docs rev: af779a5a70790d9c15584e1a463e1f0a5c79987f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The URL naming convention for the YP Release Notes has changed.
It now takes the following form:
http://www.yoctoproject.org/download/yoctoproject-15-poky-1000
The above is an example for YP Release 1.5 and poky release 10.0.0.
I have set up three new variables in the poky.ent file to somewhat
automate the links in the docs to point to the location of a given
set of release notes:
1. DISTRO_COMPRESSED - set to the DISTRO string with no period
(e.g 15 for 1.5).
2. POKYVERSION_COMPRESSED - set to the poky version with no
periods (e.g. 1000 for 10.0.0).
3. YOCTO_RELEASE_NOTES - set to the full-blown release note
URL.
I made two changes to existing links for the Release Notes. One
was in the dev-manual and one was in the ref-manual.
(From yocto-docs rev: e6088927980a1de8022b22f7f38b3046fea20235)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some re-wordings as suggested by Bill Traynor.
Reported-by: William M.A. Traynor <wmat@alphatroop.com>
(From yocto-docs rev: 2510d9795720afc0309a10b18605e5af4a83769b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was VERY dated.
(From yocto-docs rev: 6a12809fdd60c707592fff88a5b246a94d6ca220)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated to reflect the changed contents of this manual.
The section was rather dated.
(From yocto-docs rev: 08d126d611155e64d94084378cc0bb1f4cde4924)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a couple of notes to point out the ease of creating your
own distro and not just relying on a Poky distribution. One
note is at the very beginning of the manual and mentions
Angstrom as an example of a distro based on the YP. The
other note is at the beginning of the second chapter.
(From yocto-docs rev: 1525a5e34c615cbfd25aeb12cc7a27ef95b51eab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These types of links must not span multiple lines in order for
mega-manual to process them.
(From yocto-docs rev: bcea042cd796a51d866f82399b2fd0cc89ec9e2b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I went through and got rid of all references to the old
YP Kernel Architecture and Use Manual and replaced with
appropriate references to the new YP Linux Kernel
Development Manual.
I also laced in appropriate references into various sections
of the new YP Profiling and Tracing Manual.
Also, updated the list of resource manuals to reflect the
new manual set (addition of kernel-dev and profile-dev and
removal of kernel-manual).
(From yocto-docs rev: ef531ad65c9b749dad5e8e39b060bf1641e4fa38)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert P. J. Day suggested adding http://lists.yoctoproject.org/
listinfo to the list of mailing lists, which included yocto,
poky, and yocto-announce.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: f322c60814471e4216e112b193e5769fd6008a79)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Added "Debian" as a distribution for best results.
2. Fixed a link to the Hob page and two links for the
Build Appliance.
3. Three typos fixed and a few grammar items fixed.
(From yocto-docs rev: 0b381094ed9cc2d66895d4ad7c63005c8a918eb1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removing the Appendix A (BSP) example had some rippling affects
throughout the doc set. There were several links into the appendix.
All these links had to either be modified (if possible) or simply
removed since the appendix will be removed.
(From yocto-docs rev: fff35abd87e945de1806eef63a56a956d104bf92)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
changed the example of what the manual does not provide to
be more appropriate.
(From yocto-docs rev: c4e7712cfd2e13b42f7322ffed6a1f84116df963)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert P. J. Day pointed out a link in the development manual that
was for the BitBake User Manual. The link resolved to an old,
non-maintained version of BitBake documentation. According to
Richard Purdie, the BitBake docs referenced should be the ones
that ship in the bitbake/doc/manual directory of poky. The
YP docs had been using a variable named BITBAKE_DOCS_URL that
also resolved to the antiquated user manual site. Consequently,
there were many links that needed fixed across both the YP
Development Manual and the YP Reference Manual. Each of these
references now points in general to the bitbake/doc/manual
directory in poky for more information.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 12f77236b602e9ec43e845c8cec060ad342af19c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I fixed several occurences of cross-references to whole manuals where
the formatting was split in the <ulink> statement. The <ulink> tag
and the manual title must be on one DocBook line in order for the
sed scripts to correctly process the links when the mega-manual is
created.
(From yocto-docs rev: 0dee12d518c892f59c0446e1c7b5d0f71b6ee22b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed several references to books. There should be no books referenced
using "The" at the beginning of the manual title. These need to be
"the" in order for correct mega-manual link processing with the
sed script.
(From yocto-docs rev: 76753216c7138d55f7b6f9167d678245ab3134e7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The way I refered to the YP Quick Start was inconsistant.
I have made edits to remove these.
(From yocto-docs rev: d9487c60db23861e8a9dd2c81ac46d4960abd462)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The name of the ADT manual has changed to the "Yocto Project
Application Developer's Guide." This change had some ripple effect
regarding cross-references into the manual. These are now fixed.
(From yocto-docs rev: 7ba25c470b03a85098388e6cca7c78a6ebb245d8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: ddee80872afc567b9381387980f257b337f29ea1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have replaced the term "Yocto Project" with more appropriate terms
where possible.
(From yocto-docs rev: 622ef9a2b4897ecd151b641b43d7706ab673c989)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
