Updated the description to tell the user they can safely
clean up the DL_DIR after creating tarballs of the source
files from downloaded repos.
(From yocto-docs rev: 6aff69632ea3102b6389ea510e1e3fa5bf1c2123)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The update fixes a copy-paste-and-forget-to-update-everything error
in the documentation of the `SRC_URI` entry in the Reference Manual.
The `maxdate` paragraph just repeated what is there for the
neighboring `mindate` paragraph which was incorrect.
(From yocto-docs rev: bbeb096222d42a31adcb358a85f8fe6c4120416a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes to the lists resulted in the testing and graphics &
Eclipse Plug-in lists going away. Also, I added several packages
based on some testing requirements to the "Essentials" list.
(From yocto-docs rev: cbc9a595bef3dd80f5eef1376e466627248f9fda)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #13196]
The set of host packages for the testing has been merged into
the essential set of packages for all supported distros. I
updated the variables defined in "poky.ent" so that these
packages are now part of the essentials. I also removed the
section on the required packages for testing.
(From yocto-docs rev: 9b19661d21a14966eac162ee063fca46d6403323)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Took this out of the glossary. After eglibc was merged
into glibc, Kconfig support was also dropped so
these libc features therefore are not effective anymore
and can be removed.
(From yocto-docs rev: cfdd02864f004fc48b0353ec0f007ca24b06d29e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #13112]
Added a reference in the FILESOVERRIDES variable description
to the FILESPATH description to see an example of how automatic
overrides work.
(From yocto-docs rev: e78fc3468de3d9b9935f0e4f4aa4117b6805e631)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #13112]
Did some paragraph re-ordering based on reviewer feedback.
Also, added a bit in the FILESOVERRIDES variable description
about out it uses overrides to help with automatic overriding
of the FILESPATH variable. Added some better links into the
BitBake User Manual as well.
(From yocto-docs rev: 6ad5c6f030501cda9bc8ea648d9d7c0e991f55cf)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No indentation was being used for the example.
(From yocto-docs rev: e5d13181546d19772fede972b20518103d897eaa)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new default is "debug-with-srcpkg"
(From yocto-docs rev: b427e7c2d9f6efca7e0867cc8e508d4e941c5a09)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the definition to match that of poky.conf.
(From yocto-docs rev: 09c73c227c6949ed3f1287ce063aa96967ed2fda)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #13112]
Fixes [YOCTO #13115]
* FILESPATH: Added a detailed example of how to use the variable
to set machine-specific configurations. Also, noted the default
behavior of using FILESOVERRIDES to automatically extend
FILESPATH. Did some rewriting as well.
* IMAGE_FSTYPES: Updated the note to not be exclusive to "live"
images. The behavior applies to many images.
(From yocto-docs rev: 46e3f2545c45ba5391603f9ffa1c87896d472df6)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some occurrences of links to the BitBake User Manual were using
a target (i.e. &YOCTO_DOCS_BB_URL;#bitbake-user-manual). Using
this form causes the mega-manual.sed file to not process the link
correctly for the mega-manual. These are subtle errors and have
probably existed for some time. I removed the target ID to fix
the problem.
(From yocto-docs rev: 701f61fd80e5103ee02efbe5eed9a8607ac9a336)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated poky.ent to have variables for 2.7.
Updated mega-manual.sed file to use "2.7" string.
Updated all <manual>.xml Manual History Tables to use "TBD"
(From yocto-docs rev: d6f8bbd6e107913265ea1ac95ab8817e199ff60b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I cleaned up the terminology used for the CMake build system.
I provided some meaningful links to a good overview page for CMake.
I also built in some cross-referencing as needed.
(From yocto-docs rev: 7c38add39b97a7a8786a1be53f9ff549e4727fad)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updates for the "thud" release.
(From yocto-docs rev: ccd2d2c7b062627a3fd1961ab23ee6fff714428a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Windows Subsystem for Linux (WSL) is not supported with the
Yocto Project.
(From yocto-docs rev: 0898d7fb7166da91598854f385cd574004098ac3)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "image_types" class is now inherited mandatorily in
image.bbclass through the variable IMGCLASSES. Users do not
have to inherit it in their customized image type bbclass.
They also do not have to put it in IMAGE_CLASSES.
(From yocto-docs rev: bd391092b216e39dad317dc1aae5c715371766ef)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two areas in the migration chapter discuss the post-installation
behavior when you defer the scripts to after boot. I added a
couple references to each of those migration note sections that
go into the dev-manual's section.
(From yocto-docs rev: eeb09b5fa208499f37be4e5aafcf55db82715fd1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed reference to "python-modules" to "python-modules /
python3-modules".
(From yocto-docs rev: 49d66f928366dda19b6afd1e9ac6431f0f66ab21)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor fixes here and there.
(From yocto-docs rev: 740b4392bd98a12f188b79ae3ecdc7c3031f9f7d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the completed first draft.
(From yocto-docs rev: 45d39b7655ea5b515c8dda91249a84ee19387099)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The KERNEL_ARTIFACT_NAME variable is used throughout to set the names
of build artifacts. Rather than repeat informaiton about
KERNEL_ARTIFACT_NAME in the many variables that use it, I added
a new entry for the variable. This also impacted the descriptions
of the variables that were repeating information. I updated those
variable descriptions as well.
(From yocto-docs rev: 5750d30be21e17fe21d89254925dc0e773c08e66)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the wording "post 2.6" to state "2.6 and
forward". It was incorrect as the changes are inclusive
of YP release 2.6.
(From yocto-docs rev: fb3f3db17ea416cd829a291df3933cc3597392b8)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The KERNEL_IMAGE_NAME variable is new and is effectively
a renamed KERNEL_IMAGE_BASE_NAME variable now. I provided a
new glossary description for the new variable. I updated the
existing KERNEL_IMAGE_BASE_NAME description to note it has
changed. We can't just delete the old variable as there are
migration notes for previous releases of YP.
(From yocto-docs rev: e5a38711342f88ded4368521a70e9d117b6d991c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made two minor corrections from reviewer feedback.
(From yocto-docs rev: 765e44127f52e1d9d4d1c365b0574ca73364add2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided more explanation and also a link into the BB manual
for a detailed example.
(From yocto-docs rev: ca1e113dc837f5104f765b655880a87d1fbd66ac)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided some new sections on the information for migrating from the
2.5 release to the 2.6 release.
(From yocto-docs rev: dd721a31594c753d7229c45ebad0ce11640a0704)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added notes indicating that the best practice for automated testing
is to inherit these classes by using the IMAGE_CLASSES variable instead
of the INHERIT variable.
(From yocto-docs rev: 8f4765db897c20f0011ea65f62d6b45495d313d2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The TEST_IMAGE variable went away and was replaced with the
TESTIMAGE_AUTO variable. Fixed all related/affected areas.
(From yocto-docs rev: 660da40b4fcdc05666e1877037fa63eb1dfe7227)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #12390]
Updated three variables: BB_ALLOWED_NETWORKS, BBMASK, and BBFILES.
Fixed some linking to be sure to use Python3 links instead of
Python 2. Fixed a note to clarify use of the "*" wildcard
restrictions in the BB_ALLOWED_NETWORKS variable.
(From yocto-docs rev: 6f880d10d0830d80cc2d4d1d5b7ea141dad6d4af)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11107]
Updated the SSTATE_MIRRORS variable description to include
explanation of how to use regular expressions to map file locations
to server-provided URLs to share sstate information.
(From yocto-docs rev: 1357095864ee919f576de8df36f4e177b24fdd22)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added specific wildcarding support descriptions for all related
variables and file panthnames.
(From yocto-docs rev: 543e398c4ae1bce38517a88cd91c957a583a2892)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #12924]
Naming convention does not apply to the second recipe-creation
method described in this class. I have moved the note about that
to be under the applicable method (i.e. the first bullet).
Fixed the syntax reversal of the sample name in the example.
(From yocto-docs rev: f7f1a89043156527fa4b426c0322ad225a9f2ff1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the "debug-with-srcpkg" option for the PACKAGE_DEBUG_SPLIT_STYLE
variable.
(From yocto-docs rev: 05c51e53059bf7c999a448402d60d0b16d62341b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
