There is not much sense in creation of empty squashfs
partition. It's also not possible to create empty squashfs
partition of specified size.
Even more, prepare_empty_partition_squashfs method is
absolutely broken. It raises exception when called and
even its signature differs from the rest of of similar
methods. It means that nobody uses it and it's safe
to remove it.
Removed prepare_empty_partition_squashfs method and
testing of empty squashfs partition.
(From OE-Core rev: 9152960f250cb4df1e559d747fb09005675a0d75)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added vfat and msdos to the list of supported fstypes in
'wic help kickstart' output.
[YOCTO #11137]
(From OE-Core rev: ab7f2a77e124d8859002619e7ba3117e8a165df7)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Explicitly set system id 0x6(FAT16) for msdos partitions.
Removed old code that attempts to achieve the same result
using 'parted ... lba off'.
(From OE-Core rev: 230452faf151e277bfb2b49526923f8097755b35)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used '-F 16' parameter for mkdosfs to create FAT16 partitions for
'msdos' partition type.
[YOCTO #11137]
(From OE-Core rev: b6243a03ced9a719a5801afcee014b03313cc43c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added prepare_empty_partition_msdos and prepare_rootfs_msdos
methods to support 'msdos' filesystem type.
Created aliases prepare_empty_partition_vfat and prepare_rootfs_vfat
to continue supporting creation of vfat patitiions.
(From OE-Core rev: f06c507078da72f616f45effe5005cc01615a17c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed wic code that loops through hard-coded list of known fstypes
to find prepare_rootfs_<fstype> or prepare_empty_partition_<fstype>
methods and silently skipping unknown fstypes.
(From OE-Core rev: ebb8fb5f81f473156c9aa4bf1965e538492a851b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Restricted possible values of --fstype to the list of
supported types. This should catch incorrect values
when .wks file is being parsed.
Removed checks for empty fstype and mentioning of
unsupported fstype 'ontrackdm6aux3'.
(From OE-Core rev: 21af89a6d44ccea6aef975ffd2483a8fad1231de)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed unused APIs 'outs' and 'quiet'.
Removed 'catch' parameter from runner.runtool API as wic
uses only one value of it. Removed the code that handles
unused values of 'catch' parameter.
[YOCTO #10618]
(From OE-Core rev: 1e45a4f72b16c7ab64f46907d2d2ee9cd749dc23)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced runner.show call to exec_cmd call in bootimg-pcbios
plugin. Removed runner.show API as it's not used anywhere else.
[YOCTO #10618]
(From OE-Core rev: 9749336c37249af99c92478c3e4dc8821cb9a816)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If bootloader artifacts are not found in default bootimg_dir
use wic-tools sysroot for the same purpose. This should
prevent wic from failing if bootloader artifacts can't be
found in image native sysroot.
(From OE-Core rev: 9674bbd0585fc25ccd362f233b83d07ff8f6ff53)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed fsimage plugin and prepare_rootfs_from_fs_image API as
they duplicate functionality of rawcopy plugin. Fsimage plugin makes
wic to remove the image artifact from deployment directory, which
can cause problems too.
[YOCTO #10618]
(From OE-Core rev: 9a470752f5698f791f8f78e28d163a0b9c695186)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
FIEMAP API was added to Linux kernel 2.6.28 back in 2008
SEEK_HOLE and SEEK_DATA API was added much letter.
As FIEMAP is used by filemap module as a default API it's
safe to remove FileMpSeek class as it's never used.
[YOCTO #10618]
(From OE-Core rev: 44e9406ea6e3263d2fb95e9d534a21f74f318480)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you are using relative paths and change to other folder for
execution it will fail, so use realpaths always.
[YOCTO #11164]
(From OE-Core rev: 14283700f8ec9dcb29cbc00c92d76173f1601bf5)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some layers don't have dependencies so add a validation to avoid
exception when trying to None.split().
(From OE-Core rev: 39103285029a0bb7b64dc5a305c484988b4c651a)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, SRCREV is set to AUTOREV, causing mismatch between PV and the kernel
version shown in the makefile (see below to see the bitbake log). The solution
is to skip this check, suggesting to remove it once SRCREV is locked.
ERROR: linux-yocto-4.10+gitAUTOINC+01f18cba44_53be19cad6-r0.1 do_kernel_version_sanity_check: Package Version (4.10+gitAUTOINC+01f18cba44_53be19cad6) does not match of kernel being built (4.10.5). Please update the PV variable to match the kernel source or set KERNEL_VERSION_SANITY_SKIP="1" in your recipe.
ERROR: linux-yocto-4.10+gitAUTOINC+01f18cba44_53be19cad6-r0.1 do_kernel_version_sanity_check: Function failed: do_kernel_version_sanity_check (log file is located at /home/lsandov1/poky2/build/tmp/work/myqemu-poky-linux/linux-yocto/4.10+gitAUTOINC+01f18cba44_53be19cad6-r0.1/temp/log.do_kernel_version_sanity_check.26904)
ERROR: Logfile of failure stored in: /home/lsandov1/poky2/build/tmp/work/myqemu-poky-linux/linux-yocto/4.10+gitAUTOINC+01f18cba44_53be19cad6-r0.1/temp/log.do_kernel_version_sanity_check.26904
ERROR: Task (/home/lsandov1/poky2/meta/recipes-kernel/linux/linux-yocto_4.10.bb:do_kernel_version_sanity_check) failed with exit code '1
[YOCTO #11064]
(From meta-yocto rev: 79bfd911f826c6c7e26827bb200dd69e6f567b17)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When devtool writes to the kconfig fragment, it writes the output of
the diff command returned from pipe.communicate(). This function
returns binary objects. We should open the kconfig fragment file in
binary mode if we expect to write binary objects to it.
[YOCTO #11171]
(From OE-Core rev: 72bec63ab0e78753fb6ed1794d11beef9485c014)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partition UUID for msdos partitioning is based on a 4 bytes long
system identifier. Wic uses random number to generate system
identifier. For the numbers starting with 0 partition uuid is
shorter, which makes wic images non-bootable as kernel expects
8 charactest in PARTUUID parameter.
Padded system identifier with '0' when generating partition UUID
to make it always 8 characters long. This should fix the boot
issue.
(From OE-Core rev: bdaba95af2b2c9174311374436f184d2a927f6f1)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New set of templates that target the 4.10 kernel version.
[YOCTO #11174]
(From meta-yocto rev: 8a11b0cc2a1bfaab25200c251b301c812141ba58)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed test failure caused by using bootimg_dir path
instead of kernel_dir to find systemd-efi bootloader:
FAIL: test_systemd_bootdisk (oeqa.selftest.wic.Wic)
...
FileNotFoundError: [Errno 2] No such file or directory:
'tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/recipe-sysroot/usr/share'
(From OE-Core rev: 552bd782d9ffe275b8fc7d7cb0b9aaceb51888c3)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used wic-tools STAGING_DATADIR if syslinux can't be found
in default bootimg_dir.
(From OE-Core rev: 79a935cfc86ffce6f4b4f328b90337de36ba6dbb)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed do_install_disk and do_configure_partition methods from
bootimage-partition, fsimage and rawcopy plugins as they're empy
and not used.
[YOCTO #10618]
(From OE-Core rev: d58c8ef2836418056f776a9586e0bb0d33afb788)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sparse_copy creates output file that is smaller than input
file when input file ends with unmapped blocks.
Used truncate(<input file size>) when output file is created
to ensure the size of output file will always be equal to
the size of input file.
(From OE-Core rev: 567186f995302a095a771baede4ff5034d1d1862)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bootimg_dir is usually set to the value of STAGING_DATADIR and
kernel_dir - to the value of DEPLOY_DIR_IMAGE, so usage of
kernel_dir is more logical in bootimg-efi, bootimg-partition and
rawcopy plugins.
Replaced usage of bootimg_dir to kernel_dir in 3 above mentioned
plugins that use DEPLOY_DIR_IMAGE as a default artifact location.
(From OE-Core rev: 48a5d67d7cafdeac821e6f35bea380521ef017d5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changing bootimg_dir in plugins is a dangerous hack as this
value comes from wic command line and can be used by multiple
plugins.
(From OE-Core rev: 2457ea5338f7309316b474562b4723e8cb09286d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If some layer depends on other tries to find layer dependency, if the
layer dependency isn't found avoid to test the layer and notice the
user.
(From OE-Core rev: 1e7cf9bb71521f1632dd2e6b01fe7fcc95732983)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes there is a need to only analyze the layer specified by the
command line, the new option -n will disable autodiscovery of layers
and only will try to test specified layers.
(From OE-Core rev: f2f6f0c938226802163698ef14a8a9103da362a0)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The layers isn't required to have a dirctory name start with meta-
so remove the validation.
(From OE-Core rev: 576c6486f547b1d7422cdd12f688aef74ee632ae)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The meta-world-pkgdata recipe can be modified when a layer is added
may be can add recipes to world target, so exclude by default.
[YOCTO #11162]
(From OE-Core rev: cde30d70b04eb66bff66a351ddf733022e98ddab)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is a good idea to let the script to choose what stream wants
to dump the logging output.
[YOCTO #11160]
(From OE-Core rev: 60c9b06f4085f6bddb6aa397a38bfc2ceb10f964)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch avoids the creation of a corrupt EXT file system.
Since there are no checks if a EXT file system was successfully created,
this should add to prevent possible system failures.
(From OE-Core rev: 95ac3d0637cad7e12f246b8bd64ab64348df0483)
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the tinfoil2 refactoring, if an error occurred during parsing, we
were showing a traceback and not correctly exiting (since we weren't
calling shutdown()). Fix both of these issues.
(From OE-Core rev: 18304036e1b513fd12c049dbf549ba75c503ed84)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't need the gap that the extended partition occupies if we
already know that we have less than five partitions. Saves up to one
full alignment of space.
(From OE-Core rev: 485315dc170e29962a8848db38db73abafd0586e)
Signed-off-by: Kristian Amlie <kristian.amlie@mender.io>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Web applications built using e.g. angular2, usually requires that the
packages in devDependencies are available.
Thus, add an option '--fetch-dev' to both devtool add and recipetool, to
add npm packages in devDependencies to DEPENDS.
(From OE-Core rev: f246f820d53b459596fde6758a09f7a0d7db7c4c)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When "bitbake -k -S none world" failed, the error printed by
yocto-compat-layer.py contained the stack trace multiple times and did not
contain the stderr output from bitbake, making the error hard to understand
and debug:
INFO: ======================================================================
INFO: ERROR: test_signatures (common.CommonCompatLayer)
INFO: ----------------------------------------------------------------------
INFO: Traceback (most recent call last):
File "/fast/work/poky/scripts/lib/compatlayer/__init__.py", line 144, in get_signatures
stderr=subprocess.PIPE)
File "/usr/lib/python3.4/subprocess.py", line 620, in check_output
raise CalledProcessError(retcode, process.args, output=output)
subprocess.CalledProcessError: Command 'bitbake -k -S none world' returned non-zero exit status 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/fast/work/poky/scripts/lib/compatlayer/cases/common.py", line 51, in test_signatures
curr_sigs = get_signatures(self.td['builddir'], failsafe=True)
File "/fast/work/poky/scripts/lib/compatlayer/__init__.py", line 149, in get_signatures
raise RuntimeError(msg)
RuntimeError: Traceback (most recent call last):
File "/fast/work/poky/scripts/lib/compatlayer/__init__.py", line 144, in get_signatures
stderr=subprocess.PIPE)
File "/usr/lib/python3.4/subprocess.py", line 620, in check_output
raise CalledProcessError(retcode, process.args, output=output)
subprocess.CalledProcessError: Command 'bitbake -k -S none world' returned non-zero exit status 1
Loading cache...done.
Loaded 1328 entries from dependency cache.
NOTE: Resolving any missing task queue dependencies
NOTE: Runtime target 'zlib-qat' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['zlib-qat']
...
Summary: There were 5 ERROR messages shown, returning a non-zero exit code.
The yocto-compat-layer.log was incomplete, it only had the first part
without the command output.
stderr was missing due to stderr=subprocess.PIPE.
Instead of the complicated try/except construct it's better to check
the return code ourselves and raise just a single exception. The
output (both on stderr and in the yocto-compat-layer.log) now is:
INFO: ======================================================================
INFO: ERROR: test_signatures (common.CommonCompatLayer)
INFO: ----------------------------------------------------------------------
INFO: Traceback (most recent call last):
File "/fast/work/poky/scripts/lib/compatlayer/cases/common.py", line 51, in test_signatures
curr_sigs = get_signatures(self.td['builddir'], failsafe=True)
File "/fast/work/poky/scripts/lib/compatlayer/__init__.py", line 147, in get_signatures
raise RuntimeError(msg)
RuntimeError: Generating signatures failed. This might be due to some parse error and/or general layer incompatibilities.
Command: bitbake -k -S none world
Output:
Loading cache...done.
Loaded 1328 entries from dependency cache.
NOTE: Resolving any missing task queue dependencies
ERROR: Nothing PROVIDES 'qat16' (but /fast/work/meta-intel/common/recipes-extended/openssl-qat/openssl-qat_0.4.9-009.bb DEPENDS on or otherwise requires it)
ERROR: qat16 was skipped: incompatible with machine qemux86 (not in COMPATIBLE_MACHINE)
...
Missing or unbuildable dependency chain was: ['openssl-qat-dev']
...
Summary: There were 5 ERROR messages shown, returning a non-zero exit code.
(From OE-Core rev: 5b9ac62ab535d2791b9713857e1016f49f53dd8d)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we are both having a bootloader and a U-Boot environment file, we
can end up with two entries using "--source rawcopy" and "--no-table",
and since they reuse the same file [1], their cleanup handlers will
try to delete the same file twice. So make sure we only do it once.
[1] Although they reuse the same file, the resulting output is
correct, so it appears the file is accessed in properly sequential
order.
(From OE-Core rev: f1a3eac376c4600cdb128d870ad9b7e9d51ed9c0)
Signed-off-by: Kristian Amlie <kristian.amlie@mender.io>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patches removes the empty space in front of the copied file which
was skipped. Without this reduction it's not possible to place a
partition with rawcopy and skip parameter on a desired alignment.
(From OE-Core rev: 5c024d71f9413b81ee1707dbc41f0721f8f27bdb)
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without the int() function this variable will be a string. This will led
to a error in Filemap on line 545 due wrong types.
> [...]
> File
> ".../poky/scripts/lib/wic/filemap.py", line 545, in sparse_copy
> if start < skip < end:
> TypeError: unorderable types: int() < str()
(From OE-Core rev: 46b5814bcdc0e7e3cb293e877e2aa949baf5fef8)
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The yocto-compat-layer script serves as a tool to validate the alignament
of a layer with YP Compatible Layers Programme [1], is based on an RFC
sent to the ML to enable automatic testing of layers [2] that wants to
be YP Compatible.
The tool takes an layer (or set of layers) via command line option -l
and detects what kind of layer is distro, machine or software and then
executes a set of tests against the layer in order to validate the
compatibility.
The tests currently implemented are:
common.test_readme: Test if a README file exists in the layer and isn't
empty.
common.test_parse: Test for execute bitbake -p without errors.
common.test_show_environment: Test for execute bitbake -e without errors.
common.test_signatures: Test executed in BSP and DISTRO layers to review
doesn't comes with recipes that changes the signatures.
bsp.test_bsp_defines_machines: Test if a BSP layers has machines
configurations.
bsp.test_bsp_no_set_machine: Test the BSP layer to doesn't set
machine at adding layer.
distro.test_distro_defines_distros: Test if a DISTRO layers has distro
configurations.
distro.test_distro_no_set_distro: Test the DISTRO layer to doesn't set
distro at adding layer.
Example of usage:
$ source oe-init-build-env
$ yocto-compat-layer.py LAYER_DIR
[YOCTO #10596]
[1] https://www.yoctoproject.org/webform/yocto-project-compatible-registration
[2] https://lists.yoctoproject.org/pipermail/yocto-ab/2016-October/001801.html
(From OE-Core rev: e14596ac33329bc61fe38a6582fa91f76ff5b147)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rewrite Public Domain as PD, as that's what the place holder in
meta/files/common_licenses is called.
(From OE-Core rev: d7f0af5aa90a9ef7714c842fb4cb762017820768)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Handle npm packages with multiple licenses (AND and OR).
Prior to this, AND and OR were treated as licensed in their
own.
(From OE-Core rev: c0cfd9b1d54b05ad048f444d6fe248aa0500159e)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rewrite the 'SEE LICENSE IN EULA' to a single string (without
spaces), to avoid splitting the string later on.
(Otherwise, each word gets split, and assumed to be a license
on it's own.
(From OE-Core rev: 39127702cee80c972ee9a447ef4006751f47475e)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Quite a few npm packages declare MIT/X11 as their license. This is equal to
a pure MIT license.
(From OE-Core rev: 8df5e731a10cc9ade1266e9daaa26ec7c855c062)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added 3 new targets to directdisk-bootloader-config.cfg to
match hddimg syslinux config.
This is a preparation for dropping hddimg in favor of wic.
[YOCTO #11044]
(From OE-Core rev: 95bf0af5293a7f5868abd85f4fc15f5c542bfd09)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Installed vesamenu.c32 and its dependencies to support
vesamenu ui in syslinux config.
(From OE-Core rev: 6d7e57ca7e77f3164e4d24470bb1e3ee91a07a89)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced forgotten calls of logger.error with raising
WicError exception. Otherwise errors will be ignored.
(From OE-Core rev: 7a5156092699593903a4bedb4cb23cc6e42ea62e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Defined variable 'out' to fix this exception:
UnboundLocalError: local variable 'out' referenced before assignment
(From OE-Core rev: d994340ec32ec04226ec185a8998775602c8b8bf)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added search paths to the debug message to make it
easier to see where the native command is searched.
[YOCTO #11017]
(From OE-Core rev: 3e78aa91aa07510a75ec2eecdd2dd00b1c583c26)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently there is no way to specify a dependency on native
tools for wic without modifying wic-tools recipe. Obvious
way to make it more flexible is to use image sysroot and
wic-tools together to find an executable.
Modified run_native_cmd to use image and wic-tools sysroots
to find native executable.
[YOCTO #11017]
(From OE-Core rev: 06f976cb7c593ab14ee221365d9afbaf9de94a91)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made PluginMeta to populate global PLUGINS dictionary that
is accessed by PluginMgr. This should make the code more
understandable as PluginMgr don't need to get data directly
from PlugnMeta attribute.
(From OE-Core rev: 68df14eb43103537279824c5f627cc5914b5282c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As PluginMgr class contains only one method it's
better to move it to pluginbase to have all plugin
related APIs in one module.
(From OE-Core rev: 244585b369ecc0019002ca51bf7f8fd506234462)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Store results of PluginMgr.get_plugins to avoid
loading plugins more than once.
This should speed up finding plugins.
(From OE-Core rev: 95ba37b394d01a6ed81f32ffa03813a070d682dc)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Call methods directly instead of getting them with
get_plugin_methods and then calling.
(From OE-Core rev: efcd07fe17bf55441059b00a5becc3952e0a4075)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Throw WicError if do_create method of imager plugin is
not implemented.
(From OE-Core rev: 87031c933047a37ddc26be3d04ea17b6e60ea10a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used more readable syntax to specify metaclass for
the base plugin classes.
(From OE-Core rev: 808451f154867caef73e00af04f56f051b7d5f6b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed all private methods and complicated logic.
Put all code to get plugins into get_plugins method.
(From OE-Core rev: 9b8c69cdc8500ce065dbe607ba07ee95c1016659)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Simplified the implementation of get_plugin_methods:
- get rid of looping over the dicrtionary, used access by key instead
- get rid of filling a dictionary that passed as a parameter
(From OE-Core rev: 875d4eede61b548d64f426c2ef077cc17e50cd45)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used get_plugins('source') instead of get_source_plugins to
unify and simplify API to get plugins.
(From OE-Core rev: aaab003e472416124d7342fc8c4a17c252b83f4d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of making a singleton object of PluginMgr class
it's simpler to use PluginMgr class directly as any class
is a singleton.
(From OE-Core rev: cbe7dbd31f2292416d8e801e142679c69d9a44bc)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed unused exceptions from error.py
Moved definition of WicError to lib/wic/__init__.py
(From OE-Core rev: 15442d072bb6d93bd9b941726f93262503053da5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no need to raise special exceptions. Raising
WicError should be enough.
(From OE-Core rev: b952076cc9f458c3d5eb03e12dc3ec316a44804c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced sys.exit with raising WicError in wic plugins.
(From OE-Core rev: 92e8c81c941597eb2b4b61d5c28833e4826888f8)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced sys.exit with raising WicError in the core wic modules.
(From OE-Core rev: 1b11437fb25ece5b3eede52344b071e875fa738f)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved from lib/wic/utils/ to lib/wic as this is a core module.
(From OE-Core rev: 808c70b81de5c3cfc3dcb01f08213e2ea33b7252)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced msger with wic logger in the direct plugin.
(From OE-Core rev: adeacb4e600b8438bd9db7e83a5cb4a118d186f3)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced msger with wic logger in the core wic modules.
(From OE-Core rev: cdd6675951b74075c9b9159f7465a88f83775bac)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After running sdk-install we need to ensure that the standalone sysroots are
updated as done when the eSDK is originally built. Add such a call so this
happens automatically and the envrionment scripts in the SDK work correctly
after updates.
(From OE-Core rev: 4f422071d6f9a074986f399d9e648977bd2e0a68)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enable using, e.g. host port 2222 for connection to qemu target.
Defaults to 22 for standard ssh/scp port.
[YOCTO #11079]
(From OE-Core rev: a2bfa2cc9ee19f617f7d3b6447896e45eb855d2e)
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
upgrade.py imports oe.recipeutils in meta/lib/ but path to oe.recipeutils
is not provided. This fails populate_sdk_ext.
(From OE-Core rev: 5f140359f859fea9cfe8c8d9c9584bceec875adb)
Signed-off-by: Luck Hoang <huyht1205@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved creation of PartitionedImage object from DirectPlugin.create
method to init. It makes the code a bit more readable and logical.
(From OE-Core rev: 9f225ef5620f2e47e762b2fd16fa5f8d6f1f60fd)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved the code that generates real partition numbers from DirectPlugin
to PartitionedImage.
The idea is to have all code that works with partitions
in PartitionedImage class.
(From OE-Core rev: dbd58b0b32288821d9dd5d1a3118cf7c6e8f098a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved code that calls prepare method of Partition objects
from DirectPlugin to PartitionedImage.prepare.
The idea is to have all code that works with partitions
in PartitionedImage class.
(From OE-Core rev: 700aa424f0aa239cf4149eed4bfb1dc7d9677431)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved setting of bootloader source from do_create method
to __init__ as it doesn't have anything to do with image
creation.
(From OE-Core rev: 361b890da1c7b24de0a62516545e4c164830081d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved code that generates partition UUIDs from DirectPlugin to
PartitionedImage class as it's more logical to have it there.
This allows the code to be reused by other imager plugins.
Got rid of having yet another list of partitions in PartitionedImage.
Reused the list passed from DirectPlugin.
(From OE-Core rev: 20c70dd617d4abfff507e210610a58a9989f7c9b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced call of _get_part_num method with an attribute.
This eliminates the need to call the method and loop over
partitions every time we need to know realnum for partition.
(From OE-Core rev: 96a26b6ddf22346dafa06b00816579439e98445f)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed catching CreatorError and raising it again.
(From OE-Core rev: c17353c8ec9ecb52368e08dad999aafc9ac1b734)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't transform ImagerError exception into warning.
Let wic to catch it on the upper level.
(From OE-Core rev: 0cc84c81dd4a776aa37c8d1bcdcc3fa3af78d1e4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed java-like setter set_bootimg_dir. It's more pythonic
to access public attributes directly.
(From OE-Core rev: c2a6ca4883ea59e6492ad3b4aa0e9bc358b87fed)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set default value of --ondisk to 'sda' to ensure
we always have disk name for the partition.
This is a first step of replacing --ondisk with
disk <name> attribute of .wks. This is better as
all partitions share the same disk.
(From OE-Core rev: caa243a86ba50c676f8eb0a71440885a49f10cc4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This file and utils/oe folder are not needed anymore as
all modules were removed or moved out of this directory.
(From OE-Core rev: e3b73b1c07620cde423cc7db7e2f7d8b1ad25e25)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As PartitionedImage is only used in direct.py it makes sense
to move it there. It's easier to maintain (and refactor) it
this way.
(From OE-Core rev: 2550622371f5c50857e5d58eabab01a1823c6fc3)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disk operations were spread over DirectPlugin, DiskImage and Image
code making the code hard to understand.
Renamed Image class to PartitionedImage.
Removed DiskImage class.
Moved disk operations to PartitionedImage.
There was an implicit support for multiple disks: if different devices
were specified in .wks file (e.g. --ondisk sda and --ondisk sdb), wic
would theoretically generate multiple images. This is quite confusing
option and the code supporting it was broken for a long time. The same
effect (multiple output images) can be achieved in obvious and clear
way - by using multiple .wks files.
This functionality was removed. PartitionedImage works only with
one image. This makes the code less complex and easier to maintain.
(From OE-Core rev: 4dc9dbfc7fbc16d349a019e8973d50905cd28244)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It will omit the given path from the resulting partition, and if the
given path ends in a slash, it will only delete the content, and keep
the directory.
Since mkfs only accepts whole directories as input, we need to copy
the rootfs directory to the workdir so that we can selectively delete
files from it.
Since we want to use the copyhardlinktree() function, we need to put
the generic oe lib in the module search path.
(From OE-Core rev: 6602392db3d391d926dead49fcc54326015cfe35)
Signed-off-by: Kristian Amlie <kristian.amlie@mender.io>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no need to pass scripts_path from main wic module
down the stack as it's not used there.
Removed scripts_path argument from DirectPlugin class
and wic_create function.
(From OE-Core rev: f9f72c506befdff13260f37ded0beaea3aa30fad)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partition attributes were copied to the dictionary in partitionedfs
code, which makes the code hard to follow.
Used partition object passed from direct.py module as is in
partitionedfs.
(From OE-Core rev: 97db24d34847a641868f9ee83aae56f9dd5e0a8a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced _get_parts getter with direct attribute
access to self.parts
Removed code that implicitly created partition
if there are no partitions mentioned in .wks file
(From OE-Core rev: 7ece57a80f4002d0d83dc322092e9178380ab509)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Renamed private methods with leading double underscores:
__create_partition -> _create_partition
__add_disk -> _add_disk
There is no point to have those names mangled, one underscore
is enough.
(From OE-Core rev: 26f3218070d34ccd4e81fa3b8e1a15c03583d070)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
3 lines long private method __add_partition is called only
from add_partition method. Merged them together to increase
readability.
(From OE-Core rev: b7fb20fffada61211dda6d41f99407618428f23c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Private method __format_disks is called only from create
method making the code less readable. Merged the code
into one method.
(From OE-Core rev: b76b1bd404487df38fd99bc0d0e6a59acb10c9d3)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that the datastore works dynamically we don't need the update_data calls
so we can just remove them. They're not actually done anything at all for
a while.
(From OE-Core rev: 8de0c5d3bd01919e2bf0394f9c485936d6098cec)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the move to tinfoil2, the behaviour when parsing failed has changed
a bit - exceptions are now raised, so handle these appropriately.
Specifically when if parsing the recipe created when running devtool add
fails, rename it to .bb.parsefailed so that the user can run bitbake
afterwards without parsing being interrupted.
(From OE-Core rev: b9592bd3c1ab2155b9f62d18ce593b9c88eff279)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Numbers within SCM (e.g. git) URLs are extremely unlikely to be valid
version numbers - more likely they are just part of the name, thus don't
try to extract them and use them as the version - doing so causes pretty
bad behaviour within devtool:
--------- snip ---------
$ devtool add https://github.com/inhedron/libtr50
NOTE: Fetching git://github.com/inhedron/libtr50;protocol=https...
...
NOTE: Using default source tree path .../build/workspace/sources/libtr
...
RecursionError: maximum recursion depth exceeded while calling a Python object
--------- snip ---------
(This was because ${PV} was being substituted into the URL, but PV's
value was being set to include ${SRCPV}, so there was a circular
reference.)
(From OE-Core rev: 3427508b6ce865654f8bf01a6fc04b83c70315d3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
npm's package.json supports two types of dependencies -
optionalDependencies and dependencies; in the code for creating a recipe
from a non-npm source (e.g. a git repository) we were not handling
optionalDependencies and thus when pointed at a node.js application
outside of npm we weren't taking care of all dependencies.
(From OE-Core rev: 2b66cb9982d10ce1744d430858eaef3e5a72c8c0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As syslinux module has been recently removed and
serial_consloe_form_kargs became local API in rootfs_pcbios_ext plugin
it should be called without syslinux. prefix.
(From OE-Core rev: d701673b658d879726d6cf846a6d5f4173c3b0e5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic-tools recipe specific sysroot contains syslinux as wic-tools
depends on it. Used wic-tools target to get syslinux path should
guarantee that syslinux is installed there and can be used.
(From OE-Core rev: be8ebac3b055070f690d42836bb0fdad32d29204)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic code is hard to follow due to deep and twiggy class
inheritance tree.
Flatten imager tree:
wic -> wic_create -> Creator -> DirectPlugin -> DirectImageCreator
to
wic -> wic_create -> DirectPlugin
by
removing Creator class and creator module
merging DirectImageCreator into DirectPlugin
Changed APIs to use the same parameters names.
Passed parsed command line options as an object down the stack.
(From OE-Core rev: 1e28d512341ce470c7afb256a01e597ab87170ca)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was a typo in current code: mktemp was used instead of
mkdtemp to create work directory. This is fixed by using
mkdtemp.
Create work directory as a subdirectory of output directory
to make sure both are on the same partition to make moving
of result image faster.
This also fixes possible disk space issues as mkdtemp uses
TMPDIR, TEMP or TMP environment variables to get default value
of its 'dir' parameter. Those variables are usually pointing
to /tmp, which is not the best location to create huge images.
(From OE-Core rev: e6579b4e007ce89000c46c09917fbd3c72f18a73)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make sure output directory exists before creating an image.
Create it if it doesn't exist.
(From OE-Core rev: e52bfb0e81d3fb2a474f08b2e2b8b89aadc61d14)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This module contains singe function serial_console_form_kargs, which
is used only by rootfs_pcbios_ext plugin. Moved it there and removed
syslinux module to make it easy to find and mainain plugin code.
[YOCTO #10619]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The code deals with non-existing directory
and can be removed.
[YOCTO #10619]
(From OE-Core rev: e148884b8145fad212c4085f2ead5c3e5e3e42a2)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This API is not used in wic code.
[YOCTO #10619]
(From OE-Core rev: 9d14cb8bb8cf9559b7ff0efa03427624c18e2506)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced parse_sourceparams function with list comprehension.
Used local variables instead of attributes.
Moved global variable to the local scope.
[YOCTO #10619]
(From OE-Core rev: 4adbac84046ff744f1452b5ff4d017d17d2d45e2)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This file is not used anywhere in the wic code.
[YOCTO #10619]
(From OE-Core rev: e3c43ce3261663225aeba50b8c6229577574f9b7)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As this files is located in plugins/imager subdirectory it's
obvious that it's an imager plugin. Renamed to direct.py to
be consistent with plugin naming scheme.
[YOCTO #10619]
(From OE-Core rev: d5db8c2ee91bdd51bfbb2ebf61aea8ff0378d512)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed wrong continued indentation, unused import and
trailing new line pyling warnings.
[YOCTO #10619]
(From OE-Core rev: e78762a4b52c31357ef29a5b93c53db7190fa4f2)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Synchronized attribure names in DirectImageCreator and
DirectPlugin for better readability. Simplified code,
removed unneeded global variable disk_methods.
(From OE-Core rev: b87b9ef84791615636424a224f74386a4aa0c2fa)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced class method __rootfs_dir_to_dict with a list
comprehension.
[YOCTO #10619]
(From OE-Core rev: 266fd31410771db4c06539f7368c196a6d03000a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This move simplifies directory structure and makes
further refactoring easier. The code from direct.py was used
only in direct_plugin, so it's safe to move it there.
[YOCTO #10619]
(From OE-Core rev: a8f5ebb26183faa9af6eb72f4dabfcf83aa1e8d4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed as they're not used anymore in wic code.
(From OE-Core rev: ffa2f3d7bf883d5add911b7c5d0be2b347733524)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a preparation to removing conf.py and config/wic.conf
from the codebase.
Got rid of using configmgr global object in direct_plugin and direct
modules. It was used to implicitly parse kickstart file and set
couple of variables.
Replaced usage of configmgr by passing parameters directly to the
DirectImageCreator.
[YOCTO #10619]
(From OE-Core rev: 79191119de010acb107f9392a991108728858441)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a preparation to removing conf.py and config/wic.conf
from the codebase.
confmgr object is complicated for no reason and almost
useless as all configuration info comes from command line and
bitbake variables. It's used it creator.py to store information
about output directory, logs and some never used functionality
like tmpfs for future use, which doesn't actually happen.
[YOCTO #10619]
(From OE-Core rev: 702ee7a1fe30d87d55ba9528ae89abff4e294fd9)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Renamed variable hdd_dir to deploy_dir as this variable is
assigned to the value of DEPLOY_DIR_IMAGE.
(From OE-Core rev: fc84893c319f3e8c72f13c58f25e0b54095c3a49)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
isoimage-sihybrid plugin uses MACHINE_ARCH to get the name of initrd image.
It doesn't work for all machines, for example for quemux86-64 machine
MACHINE_ARCH is quemux86_64 and initrd name is
core-image-minimal-initramfs-qemux86-64.cpio.gz
Used TRANSLATED_TARGET_ARCH variable to get the initrd image name.
Replaced MACHINE_ARCH->TRANSLATED_TARGET_ARCH in WICVARS variable to
make it available from <image>.env file.
(From OE-Core rev: edf0830412de66eada9ef3f3947ca42e301c5377)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than have each image type look for artifacts in image-specific
locations, move towards having them look for artifacts in a common
location, in this case DEPLOY_DIR_IMAGE
Use the existing deploy.bbclass to have the bootloaders put their binaries
in DEPLOY_DIR_IMAGE and then wic will find them and place them in the image
(From OE-Core rev: 1c8acea91e775b1b6f8b25e774aaba3e790fc59b)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stop using HDDDIR in isoimage-isohybrid wic plugin.
This variable is set by hddimg code, which is going to be
removed soon.
All required artifacts should be available from ISODIR.
wic-image.bbclass has been modified to build iso artifacts,
so it should be safe to remove usage of HDDDIR.
[YOCTO #10835]
(From OE-Core rev: 4ceb0df10db7254b290784cabc5279ffa2b946a4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
INITRD variable is not set if hddimg is disabled.
isoimage-isohybrid can't get correct name for initrd if INITRD
variable is not set.
Added INITRD_LIVE to WICVARS and used it in isoimage-isohybrid
code to get initrd artifact name. Used INITRD if INITRD_LIVE is not set.
(From OE-Core rev: c672753be60550b15d5d593c251b61776d5b104d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set proper gpt partition name for the partitions in case given
in the configuration
(From OE-Core rev: bc6e6a34f35bd081d828160bab8ee12e770c7e1e)
Signed-off-by: Jukka Laitinen <jukka.laitinen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Attributes with two leading underscores are mangled in Python
and used mainly for avoiding name clashes with names from
subclasses. They're not needed in most of wic classes.
(From OE-Core rev: 2f92c0490f1acf5a6926fc6654ce3b6588ddcc24)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wic used hardcoded path /var/tmp/wic/ as a work directory,
which caused conflicts if two wic instances run in parallel.
Made work directory unique and temporary. Moved results from
work directory to output directory when they're ready.
[YOCTO #10783]
(From OE-Core rev: 5d948f04823dedfa26a879aa6a5dc23de2bb9354)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Simplified DirectImageCreator code by removing inheritance
from BaseImageCreator. This inheritance doesn't make much sense
as DirectImageCreator is the only class that was inherited from
BaseImageCreator.
(From OE-Core rev: 4e9952514211ef4b9a3731ce915090385f335a31)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used wic-tools target to get location of syslinux.
(From OE-Core rev: 5afd7def3b101bb3d650db4d005cb8d36aaf074a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This parameter will be used to allow or prevent variable caching.
For example, we don't want to cache value of RECIPE_SYSROOT_NATIVE
wic-tools variable as we may decide to rebuild wic-tools.
(From OE-Core rev: e4269fdb4c3ef06b97df063f8586f74986215c83)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed isoimage-isohybrid plulgin and correspondent wic tet case:
- used wic-tools target when getting varlue of STAGING_LIBDIR variable
- ensured that image is built with efi and hddimg enabled
(From OE-Core rev: 5878484da64c38c7fde45bb06d76e22e608eb022)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Renamed grub-efi-native -> grub-efi in NATIVE_RECIPES
dictionary as '-native' suffix is added to the recipe name in
the code.
(From OE-Core rev: cd0e7b20de2de67793d0454f4e5cf6bb6f4a16f7)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic used native sysroot to get path to pseudo utility.
This approach doesn't work with recipe specific sysroots.
Using FAKEROOTCMD should fix the issue.
(From OE-Core rev: 03e051d594f285ea3c014d45e9b30028e683c602)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When extracting source for a recipe within devtool (for extract, modify
or upgrade) We need to redirect WORKDIR, STAMPS_DIR etc. under a
temporary directory so that:
(a) we pick up all files that get unpacked to the WORKDIR, and
(b) we don't disturb the existing build
However, with recipe-specific sysroots the sysroots for the recipe will
be prepared under WORKDIR, and if we used the system temporary directory
i.e. usually /tmp) as used by mkdtemp by default, then our attempts to
hardlink files into the recipe-specific sysroots will fail on systems
where /tmp is a different filesystem, and we'd have to fall back to
copying the files which is a waste of time. Put the temp directory under
the WORKDIR to prevent that from being a problem.
(From OE-Core rev: e10a973cd9390eacb13bdb99693a0622bd3695f5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
[RP: Add needed mkdirhier call]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 8c1c43b790 `wic: Create a logical partition
only when it is really mandatory` did not account for partitions that are not
present in partition table.
(From OE-Core rev: 57b05e924bba7b2fff07a34690474c0fa3046865)
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Current code doesn't always show error output of the
external command and even ignores non-zero exit code.
Moved checking of exit code value to the lowest level
possible: to _exec_cmd. This should make wic to always
check exit code of the external command and issue
an error if it's not 0.
[YOCTO #10816]
(From OE-Core rev: 7f68001579c08509332d633b27b5c2ea9386b6c9)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
part.rootfs_dir was used as an image name in the code.
However, when multi-rootfs feature is used this attribute
points to the name of the rootfs, e.g. if --rootfs command line
is rootfs1=core-image-minimal partf.rootfs_dir is 'rootfs1'.
The code also fails when image name is not provided in wic
commandline. For example, when wic is called with
--rootfs-dir=<path> part.rootfs_dir will contain path and
wic will crash trying to call bitbake -e <path> to get
value of ROOTFS_SIZE variable.
Fixed the code by getting image name properly and checking
if it's not a path.
[YOCTO #10815]
(From OE-Core rev: 2e05d9709f1308fc95d3406b8a409ea982c5b474)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This file has been moved to meta-yocto-bsp/wic/
(From OE-Core rev: efa7639b31c51e2874ba61fd68f9e2cb51145eaf)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The purpouse of this function was to check dependencies for building a
hybrid iso and build them using bitbake if not found. Calling bitbake in
this context means this wic plugin itself cannot be instrumented inside
bitbake recipes which is undesirable, the benefits of this are clear:
there is no need to maintain outside scripts to generate an iso using wic
and the isohybrid building logic can be further abstracted away into an
isohybrid.bbclass in the future which can be easily inherited or something
similar.
So remove the function and add all dependencies to NATIVE_RECIPES so that
wic can print useful errors when they're not built.
To automate building the isohybrid image dependencies, add the following
somewhere in your image build inheritence hierarcy (or maybe create a
bbclass in the future to do these sort of things automatically):
DEPENDS += "syslinux syslinux-native cdrtools-native e2fsprogs-native \
parted-native dosfstools-native mtools-native grub-efi-native"
(From OE-Core rev: ba4346069ab87f1cf942d1928f911eca6a9d65cd)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Current parsing code can wrongly interpret arbitrary lines
that are of 'key=value' format as legitimate bitbake variables.
Implemented more strict parsing of key=value pairs using
regular expressions.
(From OE-Core rev: f0ec387ad40fb9c098ac8d761993bc2bacc76e65)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the gummiboot project is no longer being maintained
and we are using systemd-boot as a replacement instead,
we can now clean up all remaining gummiboot files.
[YOCTO #10332]
(From OE-Core rev: 65eb3f51b70baaf24de871301a7247d5baed00ed)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After systemd-boot was introduced, its been tested for a while with no major
issues being found until now, this patch completely replaces all gummiboot
instances with systemd-boot ones, taking the next step into cleaning
up systemd-boot/gummiboot.
[YOCTO #10332]
(From OE-Core rev: f9a61d3400ad9068a6d83b8eb6aefe3098c58e68)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There were a few straggling expansion parameter removals left for
getVar/getVarFlag where the odd whitespace meant they were missed
on previous passes. There were also some plain broken ussages such
as:
d.getVar('ALTERNATIVE_TARGET', old_name, True)
path = d.getVar('PATH', d, True)
d.getVar('IMAGE_ROOTFS', 'True')
which I've corrected (they happend to work by luck).
(From OE-Core rev: 688f7a64917a5ce5cbe12f8e5da4d47e265d240f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added kickstart file to produce partitioned image for
MPC8315 reference hardware.
[YOCTO #8719]
(From OE-Core rev: 8c873b4fd92b72adfc49d20bbfab4779857fb6c9)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added new option --fixed-size to wks. The option can be used to indicate
the exact size of a partition. The option cannot be added together with
--size, in which case an error will be raised. Other options that
influence automatic partition size (--extra-space, --overhead-factor),
if specifiec along with --fixed-size, will raise an error.
If it partition data is larger than the amount of space specified with
--fixed-size option wic will raise an error.
(From OE-Core rev: fdd217ba874bd480e0180830fe2e6bd54dde19d9)
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using devtool modify on the kernel, we have to do a bit of a dance
with tinfoil instances because we only find out that we're working on a
kernel recipe after tinfoil is initialised, but then we need to build
kern-tools-native which we're doing just by running bitbake directly.
With the tinfoil2 changes, a datastore for the recipe that we were
keeping around across the opening and closing of tinfoil is no longer
able to be used. Re-parse the recipe to avoid this problem.
(In future this whole thing will be able to be done in the same tinfoil
instance thanks to tinfoil2, but that refactoring is yet to be done.)
(From OE-Core rev: 06127d0115ba449bf04e2579cd1010065e0ed6e3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently wic looks for wks files in
<layer dir>/scripts/lib/wic/canned-wks/ directories.
This path is too nested and doesn't look consistent with the
naming scheme of layer directories.
Added <layer>/wic directory to the list of paths
to look for wks files.
(From OE-Core rev: 803b5fa798cf7580c7c10401eb04a1cccf51b8ab)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When no --size is specified for the rootfs in the .wks, we want to obey the
rootfs size from the metadata, otherwise the defined IMAGE_ROOTFS_EXTRA_SPACE
and IMAGE_OVERHEAD_FACTOR will not be obeyed. In some cases, this can result
in image construction failure, if the size determined by du was insufficient
to hold the files without the aforementioned extra space.
This fallback from --size to ROOTFS_SIZE was already implemented when
--rootfs-dir is specified in the .wks, but it did not occur otherwise, neither
when --rootfs-dir= was passed to `wic create` nor when IMAGE_ROOTFS was used.
This made a certain amount of sense, as this fallback logic happened at such
a level that it wasn't able to identify which partitions were rootfs
partitions otherwise. Rather than doing it at that level, we can do it in
prepare_rootfs(), which is run by the rootfs source plugins.
Note that IMAGE_OVERHEAD_FACTOR and a --overhead-factor in the .wks will now
both be applied when --size isn't specified in the .wks. A warning is added
about this, though a user won't see it unless wic fails or they examine the
do_image_wic log.
Fixes [YOCTO #10815]
(From OE-Core rev: 1d50e11286722c4114c1ae0bc285f846cd85fc4c)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
getVarFlag() now defaults to expanding by default, thus remove the
True option from getVarFlag() calls with a regex search and
replace.
Search made with the following regex:
getVarFlag ?\(( ?[^,()]*, ?[^,()]*), True\)
(From OE-Core rev: 3e4806063fe11092b2307f113a6c0b0f04104091)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
(From OE-Core rev: 0a36bd96e6b29fd99a296efc358ca3e9fb5af735)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using the setVariable commands here followed by buildFile will result in
"basehash mismatch" errors, and that's expected since we are deviating
*at runtime* from what was previously seen by changing these variable
values. Set BB_HASH_IGNORE_MISMATCH to turn off the errors.
(From OE-Core rev: b0169796f294bbec0397b7eae86454a46b68cdc5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Extracting the source for a recipe (as used by devtool's extract, modify
and upgrade subcommands) requires us to run do_fetch, do_unpack,
do_patch and any tasks that the recipe has inserted inbetween, and do so
with a modified datastore primarily so that we can redirect WORKDIR and
STAMPS_DIR in order to have the files written out to a place of our
choosing and avoid stamping the tasks as having executed in a real build
context respectively. However, this all gets much more difficult when in
memres mode since we can't call internal functions such as
bb.build.exec_func() directly - instead we need to execute the tasks on
the server. To do this we use the buildFile command which already exists
for the purpose of supporting bitbake -b, and setVariable commands to
set up the appropriate datastore.
(I did look at passing the modified datastore to the buildFile command
instead of using setVar() on the main datastore, however its use of
databuilder makes that very difficult, and we'd also need a different
method of getting the changes in the datastore over to the worker as
well.)
(From OE-Core rev: eb63b5339014fc72ba4829714e0a96a98e135ee2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If PATCHTOOL is "git", and PATCH_COMMIT_FUNCTIONS is set to "1", for
additional tasks between do_unpack and do_patch, make a git commit. This
logic was previously implemented in devtool itself, but it makes more
sense for it to be implemented in the patch class since that's where the
rest of the logic is for this (or in lib/oe/patch.py). It also makes
it possible for this to work with tinfoil2.
(From OE-Core rev: f24f59ea1d8bc335ea8576f6a346d0935f4a3548)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use Tinfoil.parse_recipe_file() and Tinfoil.parse_recipe() instead of
the recipeutils equivalents, and replace any local duplicate
implementations. This not only tidies up the code but also allows these
calls to work in memres mode.
(From OE-Core rev: f13b56266ee96dfab65a3a7db50e8051aa9f071a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
setup_tinfoil() already calls prepare(), we don't need to call it again
ourselves and doing so with tinfoil2 results in "ERROR: Only one copy of
bitbake should be run against a build directory". Calling prepare()
twice should probably still be allowed, so that ought to be fixed
separately, but in the mean time this code is still wrong so fix it
here.
(From OE-Core rev: 38b8a7d4aff096ea0a62f2ddf3fe2de1df591bf5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To allow devtool plugins in one layer to shadow another in a well
defined way, first search BBPATH/lib/devtool directories and then
scripts/lib/devool and load only the first found.
The previous search and load loop would load all found plugins with the
ones found later replacing any found before.
(From OE-Core rev: 1b2b8a0a80de17ea053002fdd124055d2798029a)
Signed-off-by: Ola x Nilsson <ola.x.nilsson@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't worth bother with logical partition on MBR partition type (aka
msdos) if disk image generated by wic should have 4 partitions.
(From OE-Core rev: 36a558fbdc96094626e7de1a3510691e30885368)
Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yet another instance of us expecting a string back from subprocess when
in Python 3 what you get back is bytes. Just decode the output within
run_command() so we avoid this everywhere.
(From OE-Core rev: 103faae78cdff5280c7b7cdb7ca01e0868d02ec9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In previous implementation, a UnicodeDecodeError exception will be
raised if multi-byte encoded characters are printed by the subprocess.
As an example, the following command will fail in an en_US.UTF-8
environment because wget quotes its saving destination with '‘'(0xE2
0x80 0x98), while just the first byte is provided for decoding:
devtool add recipe http://example.com/source.tar.xz
The patch fixes the issue by avoiding such kind of incomplete decoding.
(From OE-Core rev: 1875ea92546d23abcab1b40b562477a0016f712d)
Signed-off-by: Jiajie Hu <jiajie.hu@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The hello-mod recipe is unusual in that it has only local files in
SRC_URI and builds these out of ${WORKDIR}. When you use devtool modify
on it, devtool puts all of those files in an "oe-local-files"
subdirectory of the source tree, which is not ${S} (or ${B}) any more
and thus building the recipe afterwards fails. It's a bit of a hack, but
symlink the files in oe-local-files into the source tree (and commit the
symlinks with an ignored commit so that the repo is clean) to work
around the problem. We only do this at time of extraction, so any files
added to or removed from oe-local-files after that won't be handled, but
I think there's a limit to how far we should go to support these kinds
of recipes - ultimately they are anomalies.
I initially tried a hacky workaround where I set effectively set B =
"${WORKDIR}" and that allowed it to build, but other things such as the
LIC_FILES_CHKSUM checks still broke because they expected to find files
in ${S}. Another hack where I set the sourcetree to point to the
oe-local-files subdirectory works for hello-mod but not for makedevs
since whilst that is similar, unlike hello-mod it does in fact have
files in the source tree (since it has a patch that adds COPYING) and
thus the same issue occurred.
Also tweak one of the tests that tries devtool modify / update-recipe on
the makedevs recipe to try building it since that would have caught this
issue.
Fixes [YOCTO #10616].
(From OE-Core rev: 857c06d6a1d161bf5a01311d07758bd4241929a3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The .deb import feature did not import postinst, postrm, preinst, or
prerm functions. This change checks to see if those files exist, and
if so, adds the appropriate functions.
[ YOCTO #10421 ]
(From OE-Core rev: ebb73aa6ad920bfd6a23f8c20105d6bcf07dd3d5)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you have a patch remotely fetched in a recipe (e.g. from an http
server) that needs updating then add a local version and substitute the
entry in SRC_URI to point to it.
One can argue about how desirable it is to be modifying patches fetched
in this way, but then one can argue about how desirable it is to have
such patches in the recipe in the first place - and in any case if
devtool update-recipe is to correctly transfer changes to such patches
made in the git repository within the source tree to the recipe then
there isn't much choice but to do it this way.
(From OE-Core rev: a19c26cc78a181f9dd2706dd42e7e450d7ad4082)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is possible to use gzip or bzip2 to compress patches and still refer
to them in compressed form in the SRC_URI value within a recipe. If you
run "devtool modify" on such a recipe, make changes to the commit for
the patch and then run devtool update-recipe, we need to correctly
associate the commit back to the compressed patch file and re-compress
the patch, neither of which we were doing previously.
Additionally, add an oe-selftest test to ensure this doesn't regress in
future.
Fixes [YOCTO #8278].
(From OE-Core rev: e47d21624dfec6f71742b837e91da553f18a28c5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As of the move to Python 3 and the fixes we applied at that time,
bb.process.run() will return a byte array of length 0 rather than an
empty string if the output is empty. That may be a bug that we should
fix, but for now it's easiest to just check the result here before
treating it as a string. This fixes running "devtool update-recipe" or
"devtool finish" on a recipe which has no source tree, for example
initramfs-framework.
Fixes [YOCTO #10563].
(From OE-Core rev: 66bf6978fc807ecc422fb6b6328f68bc3406cf15)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
xf86-input-libinput is RRECOMMENDed by xserver-xorg, these
legacy drivers are not needed.
(From meta-yocto rev: 715f72d7842b4a789a78e7889b2f01cd41f02df8)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix typos in documentation of Image.add_partition() and
Image.__format_disks().
(From OE-Core rev: f5bf7bf253224912c66bab89f48ff63a73e0d698)
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We explicitly check for --fstype if no source was provided for a
partition. However, this was not the case for rootfs partitions. Make
sure to raise an error if filesystem was left unspecified when preparing
a rootfs partition image.
(From OE-Core rev: b8c35fcad57810a87aa25ebeb533adf286eed565)
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It seems that prepare_empty_partition_ext() and
prepare_empty_partition_btrfs() got broken in commit
c8669749e3, thus one could observe the
following backtrace:
Backtrace:
File "<snip>/poky/scripts/lib/wic/plugins/imager/direct_plugin.py", line 93, in do_create
creator.create()
File "<snip>/poky/scripts/lib/wic/imager/baseimager.py", line 159, in create
self._create()
File "<snip>/poky/scripts/lib/wic/imager/direct.py", line 290, in _create
self.bootimg_dir, self.kernel_dir, self.native_sysroot)
File "<snip>/poky/scripts/lib/wic/partition.py", line 146, in prepare
method(rootfs, oe_builddir, native_sysroot)
File "<snip>/poky/scripts/lib/wic/partition.py", line 325, in prepare_empty_partition_ext
os.ftruncate(sparse.fileno(), rootfs_size * 1024)
NameError: name 'rootfs_size' is not defined
(From OE-Core rev: 0bf686739a5e8a1193f5be5aa60afbf2ea1e5074)
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The size field of Partition class is expected to be an integer and ought
to be set inside prepare_*() method. Make sure that this is always the
case.
(From OE-Core rev: a37838f995ae642b0b8bdd47a605a264fb3bf200)
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Root device name in systemd-bootdisk.wks is 'sda'. This can cause
images, produced using this wks to refuse booting if real device
name is not 'sda'. For example, when booting MinnowBoard MAX from
MicroSD card the boot process stucks with this message on the boot
console output: Waiting for root device /dev/sda2...
This happens because real device name of MicroSD card on this device
is mmcblk1.
Used --use-uuid option for root partition. This should make
wic to put partiion UUID instead of device name into kernel command
line.
[YOCTO #10485]
(From OE-Core rev: 5b73d5f484cc844affe91ec19d881d42e187f30c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When you run devtool add on a source tree we attempt to figure out the
correct name and version for the recipe. However, despite our best
efforts, sometimes the name and/or version we come up with isn't
correct, and the only way to remedy that up until now was to reset the
recipe, delete the source tree and start again, specifying the name this
time. To avoid this slightly painful procedure, add a "rename"
subcommand that lets you rename the recipe and/or change the version.
(From OE-Core rev: 9303d8055c45a0f6af295d70a6f6a8b9d8d8a7c9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
recipetool sets the LICENSE value based on licenses detected from the
source tree. If there are multiple licenses then they were being
separated by spaces, but this isn't actually legal formatting and if
you're using "devtool add" you get a warning printed when devtool
parses the recipe internally.
Earlier I had made a conscious decision to do it this way since it's up
to the user to figure out whether the multiple licenses should all apply
(in which case they'd be separated with &) or if there is a choice of
license (in which case | is the correct separator). However, I've come
to the conclusion that we can just default to & and then the ugly
warning goes away, and it's the safest alternative of the two (and most
likely to be correct, since it's more common to have a codebase which is
made up of code with different licenses, i.e. all of them apply to the
combined work).
I've tweaked the comment that we add to the recipe to explicitly state
that we've used & and that the user needs to change that if that's not
accurate.
Fixes [YOCTO #10413].
(From OE-Core rev: ecac6aee8cf3313350b58c21012bcd67cfb915e4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you run devtool finish to move a recipe created in the workspace by
devtool add or devtool upgrade to a layer, and that layer is not
currently included in bblayers.conf (perhaps unintentionally), then the
recipe will no longer be visible to bitbake. In this scenario, show a
warning so that the user isn't surprised by the recipe "going missing".
(From OE-Core rev: 4da8a58e2997db4f24ae0cac0ba27259d7857a05)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If devtool finish is run on a recipe where the recipe file itself is in
the workspace (e.g. where devtool add / devtool upgrade has been used)
and the specified destination layer is not in bblayers.conf, then we
need to avoid running bitbake -c clean at the end because the recipe has
been moved, but the bbappend is still present in the workspace layer at
that point and so if we do it will fail due to the dangling bbappend.
It's difficult to do the clean at the point we'd want to because tinfoil
is holding bitbake.lock for most of the time, but in any case cleaning
the recipe is less important than it used to be since we started
managing the sysroot contents more strictly, so just disable cleaning
under these circumstances to avoid the problem.
Fixes [YOCTO #10484].
(From OE-Core rev: c6980307d43632f4172e79d9607004203af4e9c8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When running devtool add, instead of hiding the recipetool create
output, change it so that it's appropriate to show in the devtool
context and show it in real-time. This means that you get status output
such as when a URL is being fetched (though currently no progress
information.) recipetool create now has a hidden --devtool option to
enable this display mode.
(From OE-Core rev: 219aec8803de4ef04c514c87ecfb15359c9424a6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced running of truncate utility with the standard library
call os.ftruncate
(From OE-Core rev: 1ba6101ceaee354816e690d44bc9a5dd8dcf4011)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new runqemu script assumes that if OECORE_NATIVE_SYSROOT is set then
it shouldn't try to run bitbake to find out the values of various
variables such as DEPLOY_DIR_IMAGE; this assumption is incorrect for the
extensible SDK. To work around this, clear OECORE_NATIVE_SYSROOT in the
environment when running runqemu.
Fixes [YOCTO #10447].
(From OE-Core rev: abff69a48bf3076ce8e21356accdc8d85d2c8dbf)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
According to UEFI specification all EFI platforms must support
GUID Partition Table(GPT) disk layout. Here is a list of advantages
of using GPT disk layout over the legacy MBR partitioning:
- Logical Block Addresses (LBAs) are 64 bits (rather than 32 bits).
- Supports many partitions (rather than just four primary partitions).
- Provides both a primary and backup partition table for redundancy.
- Uses version number and size fields for future expansion.
- Uses CRC32 fields for improved data integrity.
- Defines a GUID for uniquely identifying each partition.
- Uses a GUID and attributes to define partition content type.
- Each partition contains a 36 character human readable name.
Used GPT partitioning in all EFI kickstart files.
Tested result images on NUC, MinnowBoard MAX and MinnowBoard Turbot.
(From OE-Core rev: 66d4efeb0face5fc8a1755dcd2ed3a611997a04d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used ttyS0 console.
Removed usage of ttyPCH0 (FRI2 leftover)
Decreased bootloader timeout to 5 seconds
Removed 'vmalloc=256MB snd-hda-intel.enable_msi=0' as it's not
needed for any of reference BSPs.
(From OE-Core rev: ee16a283d695112236906338887c6eba109c9fb5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used ttyS0 console.
Removed usage of ttyPCH0 (FRI2 leftover)
Decreased bootloader timeout to 5 seconds
Removed 'vmalloc=256MB snd-hda-intel.enable_msi=0' as it's not
needed for any of reference BSPs.
(From OE-Core rev: 7b2443364a42c731bc9eefa6bb460262464e26b6)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In modern kernels, ARCH=x86 defaults to 64 bits, so explicitly
unset this word length for qemu i386 architectures.
(From meta-yocto rev: 9750779bc78de3ea33d7f88e4972a5b21c3f811b)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used ttyS0 console.
Removed usage of ttyPCH0 (FRI2 leftover)
Decreased bootloader timeout to 5 seconds
Removed 'vmalloc=256MB snd-hda-intel.enable_msi=0' as it's not needed
for any of reference BSPs.
(From OE-Core rev: b46825a6ce5cecd24fed814bae48f9cfd0b97568)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stopped using GPT partition table in mkefidisk.wks as it's not
supported by all reference hardware.
(From OE-Core rev: 07bb11b097a67ff89ae633fa1992db5494d75c0c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disk identifier created by parted doesn't match the one we generated
and used in bootloader config. We need to rewrite it to make our image
bootable.
Modified involved API and data structures to access previously
generated disk identifiers after MBR is initialized. Written disk
identifiers to MBR.
(From OE-Core rev: 221d3bdd6e0ab8a4d25e2c96bd976cbec4e76681)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added generation of partition UUIDs for MSDOS partitions.
UUID for MSDOS partitions is <disk identifier>-<partition number>,
where disk identifier is a random 4 bytes long number. It's usually
generated when MBR/partition table is initialized.
As UUID is used to point to the root partition in bootloader config
we need to generate it before the MBR is initialized.
After MBR is created we need to rewrite system identifier to match
it with what is used in bootloader config. This will be implemented
in the next commit.
(From OE-Core rev: 6ecc6addf4080eda75a15af077816c81c6bf70a5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sgdisk fails to set PARTUUID for msdos partitions as it's only
supported for GPT partitions.
Checked partition table format to run sgdisk --partition-guid
only for GPT partitions.
(From OE-Core rev: 0c1804821917d6d3a062ca19b63667d030138f21)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With recent changes to recipeutils, the list of local files returned
by get_recipe_local_files could possibly include source files. This
only happens when the recipe contains a SRC_URI using subdir= to put
files in the source tree. These files should be ignored when
populating the list of local files for oe-local-files directory.
[YOCTO #10326]
introduced in
OE-Core revision 9069fef5dad5a873c8a8f720f7bcbc7625556309
(From OE-Core rev: 31f1bbad248c36a8c86dde4ff57ce42efc664082)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All kernel choices today (linux-yocto_4.* and custom) have the same xserver options,
so remove the duplicate lines.
(From meta-yocto rev: c456b5cf172e5ee1fca078383cad189325ea05f5)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Relying on that awk is installed on the target just to extract the
fourth column (i.e., the free volume size) from `df -P` is an
unnecessary dependency for devtool deploy-target. As it is already
using sed to mangle the output from `df -P`, this can easily be
modified to only extract the free volume size.
(From OE-Core rev: 7bab454b0bf0075fbb2a5de06286a9da1df2adc6)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the user runs devtool add on an npm:// URL (or source tree that uses
node.js), and npm is not available, just build nodejs-native instead of
telling the user they need to do it; if that fails because there isn't
any such recipe (which would be the default, since it's not in OE-Core)
then produce a slightly more readable error message hinting at what the
user needs to do.
Note that this forces the use of nodejs-native rather than npm on the
host - this makes sense for two reasons: (1) we need it to be compatible
with nodejs for the target, and (2) we have to have a recipe for that
anyway, so allowing you to avoid having a recipe for the native version
isn't really beneficial.
There's a bit of a hack in here in order to allow this - for node.js
sources that aren't fetched via npm we don't know that they are that
until we've fetched and unpacked them, by which time we're inside
recipetool and have an active tinfoil instance that will prevent bitbake
being run. To avoid this being an issue, we allow recipetool to get to
the point where we know we need npm and then exit with a specific exit
code, at which point devtool can try to build it and then if that
succeeds, it will re-execute recipetool. This is definitely not ideal,
but it can't really be refactored and done properly until we do the
tinfoil2 refactoring; in the mean time though we still want to be
helpful to the user.
Fixes [YOCTO #10337].
(From OE-Core rev: f40662bde5aab158c4e4c3c3ff5e68665a4194a5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We want to remove the -f/--fetch option at some point (as you can now
specify a URL as a positional argument instead) so display a warning
that it's deprecated if it is used.
(From OE-Core rev: 43476d77a91d50454ca26e016a3413b24e9f3aec)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were supposed to be printing out the specified recipe name here but I
forgot to specify a parameter for the string.
(From OE-Core rev: 87f844e533adfc229a5d26857a82cc6b125216c8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a preparation to use mkefidisk as a default wks for
genericx86* BSPs. This change enables usage of partition UUID
instead of device name to specify root partition in kernel
command line. It should make images to boot on devices with
boot device names that differ from what's mentioned in wks file.
(From OE-Core rev: 23cca700870230b46d251086441136e99659ef12)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rename wks for systemd-boot per the suggestion from community.
Also amend description to distinguish it from others when
running "wic list images".
(From OE-Core rev: 6303dbbaa08214a37caf38e3b6b5a30a108bd3b7)
Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This function was broken by the multi-config changes, and isn't needed anymore
now that recipeutils.pn_to_recipe can handle provides. Without this, the
newappend sub-command fails.
(From OE-Core rev: 4a5028dc3d1ab2f97465e63db5b05de73daebdfa)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Preserving images for every partition doubles disk space
consumed by an image build. As those images are not used,
so it's better to remove them after assembling final image.
(From OE-Core rev: 51171b4aa10f2218c5e27d785ca7bf4f3949a4b4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added serial console to kernel command line to to make it
easier to boot wic images on devices without display.
Tested on MinnowBoard MAX.
(From OE-Core rev: 9a774e3bcd5dc4c85d642acc7bf26095b8c620e4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that recipeutils.validate_pn() properly validates characters used in
the name, we can drop this bit checking for '/' since that's not
permitted by validate_pn(). (The FIXME comment here - that I myself
apparently wrote - is questionable since that function was clearly never
intended to allow '/', perhaps I was misled because it was broken and
did so).
(From OE-Core rev: e010d9be3709cf3c607ffc03c3188abe4e1e9eb4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In keeping with making recipetool create / devtool add as easy to use as
possible, users shouldn't have to know how to reformat git short form ssh
URLs for consumption by BitBake's fetcher (for example
user@git.example.com:repo.git should be expressed as
git://user@git.example.com/repo.git;protocol=ssh ) - instead we should
just take care of that automatically. Add some logic in the appropriate
places to do that.
(From OE-Core rev: 78c672a72f49c4b6cfd8c247efcc676b0ba1681a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Filter out a plain "Licensed under the XXXX license" statement, as seen
in the capnproto project (and no doubt others).
(From OE-Core rev: ba4aa319fd49ee02ce2e30c2db0f3988c0e8833c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
AX_PKG_SWIG is not the only commonly-used macro for detecting swig -
there's also AC_PROG_SWIG. As per AX_PKG_SWIG, add swig-native to
DEPENDS if AC_PROG_SWIG is found in configure.ac.
(From OE-Core rev: 847a1aa7153fc8a7b820353283a6f1e51d64f8de)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If python is required then we need to inherit pythonnative (or
python3native) otherwise do_configure will probably fail since it won't
be able to find python.
(From OE-Core rev: 63234cc45aee91b031657971f36997e1443f80ee)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When creating a recipe for an existing local git clone, we attempt to
use the fetcher to determine if it supports the SRCREV variable.
Unfortunately running this code does a network check to get the latest
revision as a direct result of us using '${AUTOREV}' as a default value.
If you don't have a network connection this will of course fail. Rather
than have this block creating the recipe, catch the exception and just
guess from the URL.
Ultimately this should probably be fixed in the fetcher but for now this
will at least resolve the issue on this end.
(From OE-Core rev: f7e43f931d7d6019a3b2509b2b2635978fbbae36)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I ran into an example where recipetool was getting the name/version
completely wrong:
https://bitbucket.org/sortsmill/libunicodenames/downloads/libunicodenames-1.1.0_beta1.tar.xz
>From this it would create a libunicodenames-1.1.0-beta1_1.1.0-beta1.bb
file (likely because it couldn't split the file name and therefore took
all of it, then got the version from one of the files inside the
tarball). When this happens it's just irritating because you then have
to delete the recipe / run devtool reset and then run recipetool create
/ devtool add again and specify the version manually.
This patch is the result of systematically running the
determine_from_filename() function over the files on the Yocto Project
source mirror and my local downloads directory and fixing as many of the
generic issues as reasonably practical - it now gets the name and
version correct much more often. There are still cases where it won't,
but they are now in the minority.
(From OE-Core rev: 7b018b1d493a8d10fd02b8cc220990b191c87fe5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Try to ensure that for Apache, GPL and LGPL where the values extracted
from the "Classifiers" field may not be version-specific, if there is a
versioned license in the free-form license field then use that instead.
Also insert the free-form license field as a comment in the recipe for
the user's reference.
(From OE-Core rev: 237f66042eedd906f654827b53bf9269738267ab)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make use of the extravalues dict to send back other variable values from
the python handling plugin, and enable passing back PV and PN. This not
only places variable values in the final recipe a bit more consistently
with other types of source, it also allows the name and version to be
picked up fron a local source tree and not just when the recipe is
fetched from a remote URL that happens to have those in it.
(From OE-Core rev: 3e7029f28c6ea9bb1d283bcdc3fdfee11455af8e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we output extra blank lines (because of some automated editing) then
it makes the output recipe look a bit untidy. You could argue that we
should simply have the editing code not do that, but sometimes we don't
have enough context there for that to be practical. It's simple enough
to just filter out the extra blank lines when writing the file, so just
do it that way.
(From OE-Core rev: cbebc9a2edf7d7a422ee5c71219e79e3b349de3b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you have your own node.js application you may not publish it (or at
least not immediately) in an npm registry - it might just be in a
repository on github or on your local machine. Add support to recipetool
create for creating recipes to build such applications - extract their
dependencies, fetch them, and add corresponding npm:// URLs to SRC_URI,
and ensure that LICENSE / LIC_FILES_CHKSUM are updated to match. For
example, you can now run:
recipetool create https://github.com/diversario/node-ssdp
(I had to borrow some code from bitbake/lib/bb/fetch2/npm.py to
implement this functionality; this should be refactored out but now
isn't the time to do that refactoring.)
Part of the fix for [YOCTO #9537].
(From OE-Core rev: 4fb8b399c05a1b66986fc76e13525f6c5e0d9b58)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you make adjustments to the source tree (as create_npm.py will be)
then you will need to re-run the license variable handling code at the
end so that we get all of the files that should go into
LIC_FILES_CHKSUM if nothing else. Split out the license variable
handling to a separate function in order to allow this.
(From OE-Core rev: f0d6f4b7e87ea781ac0dffcc8d0310570975811b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For debugging it's useful to be able to tell recipetool to keep the
temporary directory.
(From OE-Core rev: 480a6b745a85b2881e5cc1a0bbb572e3235ca008)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ensure we fetch submodules and set SRC_URI correctly when pointing to a
git repository that contains submodules.
(From OE-Core rev: 65d5cc62d4ecfc78ce4b37b3886a7fe5aa05a75e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When trying to map python module dependencies to the packages that
provide them, if we're looking for .so files that satisfy
dependencies then we need to exclude files found under the .debug
directory, otherwise the dependency will get mapped to the python-dbg
package which isn't correct.
For example, this fixes creating a recipe for pyserial and not getting
python-fcntl in RDEPENDS_${PN}, leading to errors when trying to use the
serial module on the target.
(From OE-Core rev: 46a068ca35975988a8e9c0310f71fdcee55937a4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If AX_PKG_SWIG is found in configure.ac, then what's being looked for is
the swig binary, not swig for the target - so fix the dependency
accordingly.
(From OE-Core rev: 2600cd6f6c63ecf79804e2bc6eb6f198a012d5d6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's rare but there are recipes that have individual files (as opposed
to archives) in SRC_URI using subdir= to put them under the source tree,
the examples in OE-Core being bzip2 and openssl. This broke devtool
update-recipe (and devtool finish) because the file wasn't unpacked into
the oe-local-files directory and thus when it came time to update the
recipe, the file was assumed to have been deleted by the user and thus
the file was erroneously removed. Add logic to handle these properly so
that this doesn't happen.
(We still have another potential problem in that these files become part
of the initial commit from upstream, which could be confusing because
they didn't come from there - but that's a separate issue and not one
that is trivially solved.)
(From OE-Core rev: 9069fef5dad5a873c8a8f720f7bcbc7625556309)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should always shut down tinfoil when we're finished with it, either
by explicitly calling the shutdown() method or by using it as a
context manager ("with ...").
(From OE-Core rev: 5ec6d9ef309b841cdcbf1d14ac678d106d5d888a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using PATCHTOOL = "git", the user of the system is not really the
committer - it's the build system itself. Thus, specify "dummy" values
for username and email instead of using the user's configured values.
Various parts of the devtool code that need to make commits have also
been updated to use the same logic.
This allows PATCHTOOL = "git" and devtool to be used on systems where
git user.name / user.email has not been set (on versions of git where
it doesn't default a value under this circumstance).
If you want to return to the old behaviour where the externally
configured user name / email are used, set the following in your
local.conf:
PATCH_GIT_USER_NAME = ""
PATCH_GIT_USER_EMAIL = ""
Fixes [YOCTO #8703].
(From OE-Core rev: 765a9017eaf77ea3204fb10afb8181629680bd82)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The missing split() causes dev and dbg packages to match.
(From OE-Core rev: bf83e0f0a3d52958c4380599f1afc4b8e058afd7)
Signed-off-by: Ola x Nilsson <ola.x.nilsson@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The --wilcard-version flag was only used in the srcrev variant of the
update-recipe command.
(From OE-Core rev: d3057cba0b01484712fcee3c52373c143608a436)
Signed-off-by: Ola x Nilsson <ola.x.nilsson@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Unfortunately to implenent multiconfig support in bitbake some APIs
had to change. This updates code in OE to match the changes in bitbake.
Its mostly periperhal changes around devtool/recipetool
[Will need a bitbake version requirement bump which I'll make when merging]
(From OE-Core rev: 041212fa37bb83acac5ce4ceb9b7b77ad172c5c3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With some recent changes in the kern tools, we can drop some changes in
the yocto-bsp and yocto-kernel tools that ensured proper patching and
BSP inheritance.
In particular, we no longer need to signify the start of patching, and
we must instruct the tools that we only want configuration fragments
via inheritance .. no patches (since they are already applied).
(From meta-yocto rev: 34ed5eebd0b5baab98b6b2d7b3f06ca40932b37d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The regex here needs to be anchored to the end or it'll match longer
URLs, which was exactly what I was trying to avoid. This regression was
introduced in OE-Core revision 7998dc3597657229507e5c140fceef1e485ac402.
Fixes [YOCTO #10023].
(From OE-Core rev: 9291c5d3c257d5ada7605dfe46ababda08f6d3c1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a comment to the recipe listing license files that were found but
not able to be identified, so that the user can find and examine them
by hand fairly easily.
Fixes [YOCTO #9882].
(From OE-Core rev: 4b7d1bf8172533e9ac91a49ade152a05e2ee4146)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rawcopy plugin copies source files to build folder before using them
to assemble result image. After assembling the image wic renames
source files to <image>.p<partition number>. If the same source file
is used in multiple partitions wic breaks trying to rename file that
doesn't exist.
Added <line number> suffix to the files when copying them to the
build dir. This should make filename unique even if the same source
file is used for multiple partitions.
[YOCTO #9826]
(From OE-Core rev: 43a809bfe99024083b4ab4eb9895b084c9c4fa80)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a subcommand which will "finish" the work on a recipe. This is
effectively the same as update-recipe followed by reset, except that the
destination layer is required and it will do the right thing depending
on the situation - if the recipe file itself is in the workspace (e.g.
as a result of devtool add), the recipe file and any associated files
will be moved to the destination layer; or if the destination layer is
the one containing the original recipe, the recipe will be overwritten;
otherwise a bbappend will be created to apply the changes. In all cases
the layer path can be loosely specified - it could be a layer name, or
a partial path into a recipe. In the case of upgrades, devtool finish
will also take care of deleting the old recipe.
This avoids the user having to figure out the correct actions when
they're done - they just do "devtool finish recipename layername" and
it saves their work and then removes the recipe from the workspace.
Addresses [YOCTO #8594].
(From OE-Core rev: fa550fcb9333d59b28fc0e4aebde888831410f5c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This provides us with the information we need to remove the original
version recipe and associated files when running "devtool finish" after
"devtool upgrade".
(From OE-Core rev: 92eb42c347af919cd9f8739515fdf806c12b5ba8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will be called by "devtool finish" to allow it to update the recipe
or create the bbappend depending on the destination.
(From OE-Core rev: 5067cdc73483b53d46d9bf584723e41957c7ec54)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will be called by "devtool finish" to allow it to reset the recipe
at the end.
(From OE-Core rev: b8d398516556eaf97679e28ad58448f570984b52)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If there are files in the oe-local-files directory which are identical
to the original version, then we shouldn't be copying them to the
destination layer. This is particularly important when using the -a
option to create a bbappend.
(From OE-Core rev: 9230bfcc839eb35630949f0a8ed058ca1fa944b1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
devtool update-recipe was defaulting to the ${BPN} named directory when
adding patches next to a recipe, but that meant if you already had files
in a ${BP} named directory (i.e. name and version) or "files" then you'd
end up with two directories next to the recipe, which is usually not
what you want. To avoid this, look through FILESPATH and take the first
one that's the same level or one level down from the recipe and already
exists, if any.
(From OE-Core rev: c7a8190cf8bdf86ba850b6780b8e951e90232c06)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
According to wic documentation partition mount point is an optional
argument. Skipping mount point also makes sense in certain
configurations when one needs to specify a partition that is not mounted
by the running system, such as a recovery or a mirror partition (in dual
rootfs setups).
(From OE-Core rev: 5e063a4c6bb0e0623a4d25bb2bf6eecd9ad6b9f1)
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This wks is just a copy of gummiboot wks with bootloader
changed to systemd-boot. A very basic boot test on a X86
target is done with a direct-boot image generated by:
wic create mksystemd-bootdisk -e core-image-minimal
Because we plan to replace gummiboot with systemd-boot at any
time in the future, we summarize history (as much as I can) of
the current gummiboot wks before it's gone:
-----------------------------------------------------------------
commit 7d4bb40905
Author: Ed Bartosh <ed.bartosh@linux.intel.com>
Date: Wed Sep 2 13:58:02 2015 +0300
wic: get rid of scripts/lib/image
Moved content of scripts/lib/image/ to scripts/lib/wic as
one directory with the same name as a tool is self-explanatory
and less confusing than two.
(From OE-Core rev: 5dc02d572794298b3362378cea3d7da654456c44)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
commit 77561e7191
Author: Ed Bartosh <ed.bartosh@linux.intel.com>
Date: Wed Sep 2 13:58:01 2015 +0300
wic: use ext4 in canned .wks files
Latest kernel doesn't have ext3 compiled in. Wic images produced
from canned .wks can't boot because of that. Switching to ext4
fixes this issue.
(From OE-Core rev: d281a65a81f369fc8d75023b8f911ce4106969c1)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
commit 072657ce98
Author: Tom Zanussi <tom.zanussi@linux.intel.com>
Date: Mon Aug 11 20:35:41 2014 -0500
wic: Add mkgummidisk kickstart file
This is the same as mkefidisk but uses gummiboot instead of grub-efi.
(From OE-Core rev: 5979409ebfab0bb07b3c2b2fcf14a722c441f07b)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-----------------------------------------------------------------
(From OE-Core rev: 546cd8352b8adce074831ec31cfa3bb2bf2f0084)
Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new systemd-boot enabled in OE is the old gummiboot
merged into systemd project. Our intention is to replace
gummiboot with systemd-boot in OE once every feature based
on gummiboot is supported with systemd-boot.
Before we can purge gummiboot, we temporarily keep both of
the two bootloaders supported.
Patch doesn't do replacement for every "gummi" occurrence.
We think cleaning can be done in background after we disable
people to use gummiboot, so we just keep change small and
safe this time.
(From OE-Core rev: daa5f8b886408eb6a17898b18ac97d5a0d76d2cc)
Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is currently possible to specify a file (e.g. a tarball) on the local
disk as the source, but you have to know to put file:// in front of it.
There's really no need to force users to jump through that hoop if they
really want to do this so check if the specified source is a file and
prefix it with file:// if that's the case.
Also ensure the same works for "devtool add" at the same time.
(From OE-Core rev: 71350003790c38e84b0e525a71a2fe5d24e3d083)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For a while now, Github hasn't been advertising a specific repository
URL since cloning the web URL with git works. Armed with this knowledge
and fully expecting people to just paste the github URL, we need to
handle this situation specially. If it looks like a github URL to the
root of a repository then treat it as a git repository instead of a
normal https URL to be fetched by the wget fetcher.
(From OE-Core rev: 7998dc3597657229507e5c140fceef1e485ac402)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Certain recipes cannot be used with devtool extract / modify / upgrade -
usually because they don't provide any source. Return a specific exit
code (4) so that scripts such as scripts/contrib/devtool-stress.py know
the difference between this and a genuine failure.
(From OE-Core rev: ffd295fed4ab81fc0bd00bb145ef4d72c49584bf)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were attempting to open the recipe file unconditionally here - we
need to account for the possibility that the recipe file has been
deleted or moved away by the user.
(From OE-Core rev: 47822a2aff56fd338c16b5ad756feda9f395a8a1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In OE-Core revision 7baf57ad896112cf2258b3e2c2a1f8b756fb39bc I changed
the default update-recipe behaviour to only update patches for commits
that were changed; unfortunately I failed to handle the --initial-rev
option which was broken after that point. Rework how the initial
revision is passed in so that it now operates correctly.
(From OE-Core rev: b2ca2523cc9e51a4759b4420b07b0b67b3f5ac43)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Code cleanup, no functional changes - this code was never used.
(From OE-Core rev: 397b76c7f26e38e761b94b1f7987aafd55048e10)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We're opening source files with the default encoding (utf-8) but we
can't necessarily be sure that they are UTF-8 clean - for example,
recipetool create ftp://mama.indstate.edu/linux/tree/tree-1.7.0.tgz
prior to this patch resulted in a UnicodeDecodeError. Use the
"surrogateescape" mode to avoid this.
Fixes [YOCTO #9822].
(From OE-Core rev: 50fcd9d1b9a20d49bc873467a82a071f2f2f8b5a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the changes to migrate from optparse to argparse there was a syntax change that needs an update in the help. This is basically just the change of 'properties' and 'property' from positional arguments to options. This patch makes the required changes.
[YOCTO #8321]
(From meta-yocto rev: b171379b5ca54d55ea763421794a651e71bbda91)
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Optparse is deprecated and should be avoided. The arparse library is better suited and has more tools to handling the parsing of arguments. This patch makes necessary changes to migrate to the better library and uses arparse subcommand feature to improve organization of this script.
[YOCTO #8321]
(From meta-yocto rev: 3f45993b96d4d960da0efe8672dc323c9db091a2)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Format of properties file is expected to be a simple json detailing properties, if this format fails an exception is thrown. This patch adds a graceful error message to the case when the properties file has a wrong format.
[YOCTO #9750]
(From meta-yocto rev: 7e543aa19d0d4b2112e6316783fb31b76df3493e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Python3 requires strings to be encoded as bytes before sending them through a subprocess pipe. The help.py file is not considering this and fails when issuing paged help commands. This patch adds this encoding to solve the problem.
[YOCTO #9868]
(From meta-yocto rev: 35b487a47f0cbb99fdee2ec9cc8b56b814c8860e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
GNU make looks for "makefile" and "GNUmakefile" in addition to
"Makefile", so add these other names to the heuristic for detecting a
make-based project.
(From OE-Core rev: 204d19b02265e5b2241888e4c92c0a730f3d3472)
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow specifying more than one recipe on the devtool reset command line.
Also tweak the help text slightly.
(From OE-Core rev: ad92ed8e4f7f48a3d212962531d596b36f6b284f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit ab75075e79 broke the string formatting
for multiple arguments. Since parentheses were removed the formatting considers
only first argument instead of all of them. Fixed parentheses on the formatting.
[YOCTO #9723]
(From meta-yocto rev: d6d641d5b4bb0c8b9acd5cd1341a4a3214bff086)
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Have to convert implicit relative imports to explicit imports since
implicit relative imports are not supported on python3.
[YOCTO #9723]
(From meta-yocto rev: 89cecc603d229768428f3cb68d21235dee80efda)
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
According to https://docs.python.org/3/whatsnew/3.0.html python3
renamed 'raw_input' to 'input'. Making the appropiate changes for
this.
[YOCTO #9723]
(From meta-yocto rev: 76efeeeac7fb30b44ee7057b3b3d1fd84329dae1)
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
stdeout and stderr content returned by subprocess API has different
types in Python 3(bytes) and Python 2(string). Decoding it to
'utf-8' makes it unicode on both pythons.
(From meta-yocto rev: 1de9d0b4ad289c56907d082748cdc0111988cb4f)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used items() as iteritems() doesn't exist in python 3.
(From meta-yocto rev: 0fd2e739cd14c6a02b6f4610176a0ad29b2ecc0e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used exec() builtin instead of 'exec' statement as
this statement doesn't exist in python 3.
(From meta-yocto rev: ceb6c6fac212c5e1e76bf58b793dc2b9420b4a66)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implicit relative imports within packages are not supported in
python 3. They have to be converted to explicit imports.
Used 'from .module import' syntax for relative imports.
(From meta-yocto rev: 8eb2befc544e29fd87ac1fc75886cc6d7f40ad90)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used metaclass=<metaclass> syntax instead old
__metaclass__ = <metaclass> as only new one is supported
in python 3.
(From meta-yocto rev: 70ba79981d904b4b67440c0b5755b5449cddb025)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Renamed raw_input to input as raw_input does not
exist in python 3.
(From meta-yocto rev: c9df9f2699885f2ba5b031c8761aefbf3c796067)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since mtools has been patched to live with filesystems with sizes
not divisible by sectors-per-track, we no longer need to try to
set the size based on our guess of the sectors-per-track dosfstools is
going to use.
(From OE-Core rev: 334e32af88b310ff1ed950d127a6dedeb460f8d0)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Converted return value of items() keys() and values() to
lists when dictionary is modified in the loop and when
the result is added to the list.
(From OE-Core rev: 874a269eb1d70060c2f3b3f8b70800e2aea789f4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used urllib.parse instead of urlparse to make code
working in python 3.
(From OE-Core rev: 0a064f2216895db0181ee033a785328e704ddc0b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved call of decode('utf-8') as close as possible to
call of subprocess API to avoid calling it in a lot of
other places.
Decoded binary data to utf-8 where appropriate to fix devtool
and recipetool tests in python 3 environment.
(From OE-Core rev: 30d02e2aa2d42fdf76271234b2dc9f37bc46b250)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Python 3 doesn't have basestring type as all string
are unicode strings.
(From OE-Core rev: e8cfab060f4ff3c4c16387871354d407910e87aa)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Encoded help text before sending it to pager.communicate as
it expects binary.
[YOCTO #9412]
(From OE-Core rev: 23c27d9d936efaa17da00525f1d2e2f98c53abc7)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
xrange() no longer exists in python 3, use range()
(From OE-Core rev: d022b4335100612d6596cc4c4956cb98ed5873cc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Iterators now return views, not lists in python3. Where we need
lists, handle this explicitly.
(From OE-Core rev: caebd862bac7eed725e0f0321bf50793671b5312)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python3 standardises its use of iteration operations. Update
the code to match the for python3 requires.
(From OE-Core rev: 2476bdcbef591e951d11d57d53f1315848758571)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used print function instead of print statement to make
the code work in python 3.
(From meta-yocto rev: d6eea5a794dd8802b773a9186479a863847e6e55)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If fetching source from a git repository, typically within OpenEmbedded
we encourage setting SRCREV to a fixed revision, so change to do that by
default and add a -a/--autorev option to use "${AUTOREV}" instead.
(From OE-Core rev: 000480c42797dd2f03ebc3bc6d1dabfc6a7b75f5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we use ${BP} for the subdirectory, the default value of S will work
rather than having to have an ugly value derived from the package
file name in both places. This does mean that we have to assume the
default though (we can't just let the normal logic work because the
value of BP is the default until later on, so the replacement doesn't
work).
(From OE-Core rev: 13bc2438d61c345a8f229b9d83bf36a14d08916f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Extract the metadata from package files and use it to set variable
values in the recipe (including recipe name and version, LICENSE,
SUMMARY, DESCRIPTION, SECTION and HOMEPAGE). For LICENSE we take care
not to step on any value determined by our license file scan; if there
is one we simply add a comment above the LICENSE setting so the user can
resolve it.
(From OE-Core rev: 19e6b661d38c5ae9b19d6340762c289830baba59)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow plugins to set any variable value through the extravalues dict,
and use this to support extracting SUMMARY and HOMEPAGE values from spec
files included with the source; additionally translate "License:" to a
comment next to the LICENSE field (we have our own logic for setting
LICENSE, but it will often be useful to see what the spec file says if
one is present).
Also use the same mechanism for setting the same variables for node.js
modules; this was already supported but wasn't inserting the settings in
the appropriate place in the file which this will now do.
(From OE-Core rev: 91fc35ff5e89aa6d4c4ad945e45406fb4f71018e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We want the system to boot on its own, rather than the user having to manually
input the correct file at the EFI prompt.
[YOCTO #9556]
(From OE-Core rev: aa215c12d729c001ad3b8b98a7e203a9ad192211)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The -S / --srcrev option must be specified if fetching from a git
repository, so spell that out in the help text.
(From OE-Core rev: 1465f205c235a1688a85844ebf5259e8971038ae)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make a couple of changes to the rebase operation:
1) Only wrap the actual rebase command in try...except since a failure
in any of the other commands should be an error, not a warning
2) If it's a conflict (which unfortunately we can only tell by checking
for the keyword "conflict" since git doesn't return error codes based
on the type of error) then print a message clarifying that the user
needs to resolve the issue themselves to finish the upgrade.
(From OE-Core rev: 2a76be958432a35a0de30e9a5433089a54a06cad)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gdb recipe in OE-Core has an inc file with the version in it;
since the inc file is pulled in with a "require ${PV}.inc", when
upgrading the recipe we need to also rename the inc file it will fail to
parse and the upgrade itself will fail.
Fixes [YOCTO #9574].
(From OE-Core rev: 3c623aac9333d20a62475279c72b6b6ec3d7dd6b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having two code paths here makes maintenance difficult, and it doesn't
seem likely that you would use the local case in real usage anyway, so
drop the local support entirely.
This should allow us to resolve [YOCTO #9301].
(From OE-Core rev: 7a4c9c96fee4fb514c2b69b52e811c4f896a16f1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the path contains 'scripts' more than once the first occurrence will be
incorrectly used. Use rfind instead of find to find the last occurrence.
(From OE-Core rev: f30c486c17060d2f21618612804a692512ad6a57)
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Included description of -m/--bmap option to the help page
produced by 'wic help create'.
[YOCTO #9413]
(From OE-Core rev: 7c749d4cfe1642d70a6b3643422ef69dec1775fe)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This option enables generation of <image>.bmap file for the
result image using native bmaptool.
[YOCTO #9413]
(From OE-Core rev: d64c7b37c40b052510419b4d6629b83319c833e4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added bmaptool -> bmap-tools pair to the dictionary
executable -> recipe as bmaptool is going to be used by wic
to generate .bmap file.
[YOCTO #9413]
(From OE-Core rev: 4684ac5f4d823a6afedc57aad0aa417bb17ba950)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Generators in Python 3 don't have .next method. It's recommended
to use 'next' builtin instead. As it also present in Python >= 2.6
it should make wic code compatible with both Python 2 and Python 3.
[YOCTO #9412]
(From OE-Core rev: 9b7ab632e47d786dd979262015dbfb1254103f83)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed check for unicode type as it doesn't work in Python 3.
This check is not needed for wic as all its output seem to be
strings. This allows to run code under both pythons.
[YOCTO #9412]
(From OE-Core rev: a56924b4a0102e401b5e37d857a08bab15da974e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
stdeout and stderr content returned by communicate API has different
types in Python 3(bytes) and Python 2(string). Decoding it to 'utf-8'
makes it unicode on both pythons.
Decoded stdout and stderr output to utf-8 to make the code
working under both Python 2 and Python 3.
(From OE-Core rev: 5b556f58a171e3d45107bb56a1f780e5c1abba37)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Division operator works differently in Python 3. It results in
float unlike in Python 2, where it results in int.
Explicitly used "floor division" operator instead of 'division'
operator. This should make the code to result in integer under
both pythons.
[YOCTO #9412]
(From OE-Core rev: 997ff239bd753a7957cc14c6829b2f093d9bcef6)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As bitbake is not ported to Python 3 yet it's better to
avoid using its APIs as much as possible to be able to
test wic under Python 3 at least partially.
Used distutils.spawn.find_executable API in favor of
bb.utils.which to get path of the command to run.
(From OE-Core rev: 9658956bf8a5da779e06f71941de9b3e89415cdc)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This suffix is not supported by Python 3. Wic code works
without it on Python 2 too, so it's safe to remove it.
[YOCTO #9412]
(From OE-Core rev: 296db7e33bd71585cac63dc78c2c95bc619b4a86)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wic plugin machinery implemented using metaclasses.
Reimplemented plugin machinery using this advice from
https://wiki.python.org/moin/PortingToPy3k/BilingualQuickRef
Syntax for creating instances with different metaclasses is very
different between Python 2 and 3. Use the ability to call type instances
as a way to portably create such instances.
Now it should work under both Python 2 and Python 3.
[YOCTO #9412]
(From OE-Core rev: e62fe5a41bdcdd72b9b257fecff7ccdc59c76d33)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed 'raw', 'ask', 'choice' and 'pause' functions from
msger.py as they're not used in wic code and some of them
use raw_input, which is not present in Python 3.
[YOCTO #9412]
(From OE-Core rev: eb87d591ef67f1953b2689430ef6c5a6a27a5b6e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New syntax 'except Exception as err' is supported by Python >= 2.7.
Old syntax 'except Exception, err' is not supported by Python 3.
Used new syntax to be able to run wic on Python 3.
[YOCTO #9412]
(From OE-Core rev: 15e88714d6b0a93f72e8a19b083fcc1f2006e128)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
'with' statement is not used in baseimager.py
It's supported by Python 2.7, which is included into all target
distros. Other wic modules use this statement.
Removed useless 'from __future__ import with_statement' from
wic code.
(From OE-Core rev: 528a1f20939589949831efbb4de6336776efe7d5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All classes in Python3 are new style classes and don't need
to be inherited from object. Wic code works fine without
this inheritance even with Python2, so it's harmless to
remove it.
[YOCTO #9412]
(From OE-Core rev: a146b03ee7d0aa5bc1722da5977a5952782b69bf)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced calls of dict.keys and dict.has_key methods with the
'key in dict' statement. 'key in dict' is more pythonic, faster
and readable. dict.has_key doesn't exist in Python 3.
[YOCTO #9412]
(From OE-Core rev: 003df7dfb932c551953fbf1bd769b3c31bd16fb4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dictionary method 'iteritems' doesn't exist in Python 3.
Replaced 'iteritems' with 'items' to be able to run the
code under both Python 3 and Python 2.
[YOCTO #9412]
(From OE-Core rev: 5b14eb8d68aaca82de4f8f6bcb28ad6f4a5125d0)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Print statements have been replaced with print function in
Python 3. Replaced them in wic code to be able to run it
under both Python 2 and Python 3.
[YOCTO #9412]
(From OE-Core rev: ee6979a19c77931c3cf6368e695e370d46192fef)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If an image with the filename foo.bb could be built using the name "bar"
instead, then build-sdk would fail to create the derivative sdk.
This was because the code assumed that the file name matched the target,
which is not necessarily the case.
(From OE-Core rev: d58a326b6960be14b8a049253559aec9582b7d0d)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a branch is re-used, the kernel tools turns off any patch pushing unless
'mark patching' is explicitly set.
[YOCTO #9120]
(From meta-yocto rev: 427f5473722e15e288cbce251a9ce18989c23548)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix two problems falling back to the "license" field from package.json
when no license file is present:
1) The function that was supposed to return the license field value was
always explicitly returning None, and this was never noticed (because
the test cases never exercised the fallback as they provided license
files for each module).
2) Fix the main package not falling back because it had a default of an
empty list, which evaluates to '' instead of 'Unknown'.
(From OE-Core rev: 59381a9450949ce6b4b03adb717e950b999830f3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This aligns with our existing 'optional arguments' to 'options' change, and
seems more intuitive for users.
(From OE-Core rev: 8a1cd471210e5fb77952f28172084bf6a4fb73e8)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There's no need to iterate over the action groups here, as self._optionals and
self._positionals are available.
(From OE-Core rev: 408694f4320f3cb52a391e5b927fb8c8ba16c1d2)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As an example, `recipetool create foo bar baz` shows `recipetool: error:
unrecognized arguments: bar baz` and then displays the main help, not the help
for the create command. Fix by saving the subparser name and using it in
parse_args() to look up the subparser.
(From OE-Core rev: 7fdaaedf4c63c8d019f03f84e22f9b838ef19aa6)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This aligns our subclassed error() with that in the original class, using
_print_message and self.prog. Also add a docstring based on the original.
(From OE-Core rev: cf0c5175136966eefde8c0d9aa0679e85779f713)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used sparse_copy API in favor of dd/cp in rawcopy plugin to
preserve sparseness of the copied raw content.
[YOCTO #9099]
(From OE-Core rev: 04eca59068a79ae6a9969be495c4cdf0c5c3e466)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Copied partition images into final partitioned image using
sparse_copy API. This method preserves sparseness of the
final image. It also makes wic much faster, as unmapped
blocks of the partition images are not copied.
[YOCTO #9099]
(From OE-Core rev: 7f21427aca5df81d8881027fd98f71b821cf31d7)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to make wic images sparse sparse_copy function has been
copied from meta-ostro:
https://github.com/kad/meta-ostro/blob/master/meta-ostro/lib/image-dsk.py
This function uses filemap APIs to copy source sparse file into
destination file preserving sparseness.
The function has been modified to satisfy wic requirements:
parameter 'skip' has been added.
[YOCTO #9099]
(From OE-Core rev: bfde62bdc03152a4d3d383512479b974fa867f94)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to make wic images sparse set of APIs has been copied
from bmap-tools project.
filemap.py module is taken from bmap-tools project:
https://github.com/01org/bmap-tools/blob/master/bmaptools/Filemap.py
It implements two ways of get information about file block: FIEMAP
ioctl and the 'SEEK_HOLE / SEEK_DATA' features of the file seek
syscall.
Note that this module will be removed as soon as bmaptool utility
supports copying sparse source file into destination file (this is
already agreed with the maintainer of bmap-tools project).
[YOCTO #9099]
(From OE-Core rev: 182639ddc9cda85c896a54c1c64fd1fb145071a1)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved DiskImage class from utils/fs_related.py to
imager/direct.py as it's only used there.
Removed fs_related module as it doesn't contain anything
except of DiskImage.
(From OE-Core rev: b3cc471790784c28f9362fcd6fc6a81c4316754c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed fs_related.makedirs as is not used anywhere. The name is
easy to confuse with os.makedirs.
(From OE-Core rev: 796b114863ef20fbc89da45dbe6780abe1256f5e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no need in this inheritance as DiskImage class
is used only in one module and no other classes are inherited.
(From OE-Core rev: 5af1d9bedc2c961eb91faf80251f24c3df754d76)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used truncate instead of dd to create wic images for the
following reasons:
- dd doesn't preserve sparseness
- truncate syntax is much more clear
- dd requires additional calculations of the image size
in blocks
- the way dd was used in the code is not always correct.
In some cases it was writing one block to the file which makes
it not 100% sparse.
[YOCTO #9099]
(From OE-Core rev: d2d0d18dfd3922411d856b98ab6ba5d64c9c1c9f)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added explanation of --system-id option to the output of
wic help kickstart.
[YOCTO #9096]
(From OE-Core rev: 1a304afea4ad7be12ed5f0fcb397a538345a6b63)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used sfdisk to set partition system id if --system-id parameter
is used for a partition in wks file.
[YOCTO #9096]
(From OE-Core rev: a1f7f7e61fd20fb6319825648930f7b6aa0e0cee)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added new argument to add_partition call to pass partition
system id down the stack.
[YOCTO #9096]
(From OE-Core rev: f2733df697192c0010c17b7bbb02f8679cb8f313)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added Partition.system_id attribute and initialized it
from parse result of wks option --system-id. It will be
used by the wic code below the call stack to set partition
system id.
[YOCTO #9096]
(From OE-Core rev: 4f195a5b7574ebff8fbdb3045daa71f173f97a30)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added sfdisk -> util-linux pair to the dictionary
executable -> recipe as sfdisk is going to be used by wic
to set partition system id.
[YOCTO #9096]
(From OE-Core rev: 398aafa185acbc7239505f7107735e93a502f6d2)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added new option --system-id to wks parser. The option
will be used to set partition system id.
[YOCTO #9096]
(From OE-Core rev: b9c56b1c95cd1d0fd809d257e0cd05a50c481bed)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
os.path.join discards the cr_workdir var contents if the path of the
second arguments is absolute.
(From OE-Core rev: dba099d77dcc66b239523a55f3ed26784f9a662a)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The latest wic kickstart refactoring introduced a bootloader option
"--configfile" which lets wks' specify a custom grub.cfg for use
while booting. This is very useful for creating stuff like boot menus.
This change lets isoimage-isohybrid use --configfile; if this option is
not specified in a wks, it generates a default cfg as before.
(From OE-Core rev: bf673a769514b13558ad9c785ae4da3a5adfd1e0)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If UNINATIVE_CHECKSUM changes over an SDK update, bitbake within the
extensible SDK will be broken because it will see that the matching
uninative tarball doesn't exist and if there is a default value of
UNINATIVE_URL it will attempt to download the file and will then fail
because the checksums don't match up; alternatively if no UNINATIVE_URL
is set then it'll also fail with an error about misconfiguration. To fix
this, add some logic to devtool sdk-update to download the matching
uninative tarball(s) for the checksum(s) in the newly fetched SDK
configuration.
Fixes [YOCTO #9301].
(From OE-Core rev: 14ff58ad98a5afac08db77068d80f152d8875766)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace git pull with fetch and reset to avoid the merge logic in the
event that the layers repo in the published SDK we're updating to isn't
fast-forward merge from the local repo.
Also add gitignore and committer info during publish to avoid errors and
to be sure that the first commit has a dummy user in it.
[ YOCTO #9368 ]
(From OE-Core rev: 4657bc9d165e51981e034e73e7b92552e873eef7)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is unusual but not impossible to find recipes whose first entry is
not the main source URL but instead some patch or other local file, for
example python-cryptography in meta-python (which sets SRC_URI before
inheriting pypi). There's nothing inherently wrong with this, and we
shouldn't assume that the first entry is the main source URL, so just
take the first non-local entry instead.
(From OE-Core rev: c868198c1f6006789707b497c2ae34d7cc5e706f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partitions specifying --fsoptions were silently skipped by wic
due to the old bug introduced when removing code related to
subvolume handling:
- if mountpoint == "/" or not fsopts or fsopts.find("subvol=") == -1
+ if mountpoint == "/" or not fsopts:
[YOCTO #9396]
(From OE-Core rev: be7ff1741e8ab5f2724b3f64da1bed8b0d3dcb7c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It turns out that dd's conv=sparse doesn't look at the file extents, but simply
checks if a "block" is all zero. If the block of zero was meaningful it gets
lost and if the image is subsequently written to media using a sparse-aware
writer then the block of zeros won't be written at all.
This reverts commit 5fd592fbae2e046bcb8c3a6c3ef4993fe0400676.
(From OE-Core rev: 63d15764cc2014dba9fee2186f0c8b97c2ac5682)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The individual partitions created by wic are sparse but without
this change the assembled image is written as one (potentially
very) large file.
Preserve sparseness in the assembled image by passing the sparse
conversion symbol.
[YOCTO #9099]
(From OE-Core rev: 5fd592fbae2e046bcb8c3a6c3ef4993fe0400676)
Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix typo of the word "parameter" in for 'yocto-bsp create'.
Typo appears in both, usage and help.
Also, the word "description" is mispelled.
[Yocto #9282]
(From meta-yocto rev: 12c7243abd91b374b1b62c6a1ad13b0d25aa0e4c)
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default cpio preserves the uid&guid's of the original user which
leads to host contamination and boot failures because commands like
mount from initramfs expect to be run by root and the original host
user might not even exist on the target.
(From OE-Core rev: 28910ee2eacc15cf42b5e58bd43b3bd15c34eb97)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some filenames can omit 'initramfs', or use other names. This makes
detection more flexible by using only the image name, machine arch and
image type in a glob wildcard.
(From OE-Core rev: ca516f5907a661606c35e1ca5c2ece9fc79c77ea)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kernel recipes for linux-yocto_4.* and greater have outdated branches as default,
making it impossible to find the right branch if the user picks the default value.
The branches_base property uses these outdated branches also.
This updates standard/common-pc and standard/common-pc-64 branches to standard/base.
The fix was tested using 'yocto-bsp create' with each one of the following
archs:
-i386 with kernels 4.1 and 4.4
-x86_64 with kernels 4.1 and 4.4
-qemu (i386 and x86_64) with kernels 4.1 and 4.4
After the layer was created, it was added to local.conf and the MACHINE was set
accordingly.
'bitbake linux-yocto' ran successfully with each configuration tested.
[YOCTO #9160]
(From meta-yocto rev: d471e3dd7c5080a29f64b60b554f17ee706ee772)
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Strictly speaking we ought to explicitly shut down a tinfoil instance
when we're done with it. This doesn't affect modify's operation but is
important if you want to be able to call into modify() from another
plugin (though anyone doing so should be advised that the function is
by no means a stable API and is subject to change in future releases).
(From OE-Core rev: 626dbadf22b57a22a8f8b9d1957937120f4ba4d5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Type of --no-table option was incorrectly set in new wks parser.
It causes parser to require argument for this option, which makes
wic to fail with wks files that use --no-table:
Error: argument --no-table: expected one argument
Changed action parameter to 'store_true' to fix the issue.
(From OE-Core rev: d483724cf3515f76e1b798a2018e2f3fa2bad0ba)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the options --codedump and --skip-git-check to the yocto-bsp help and
yocto-bsp usage, since they are currently missing.
[YOCTO #8322]
(From meta-yocto rev: dfdf97b4239639affc8ce22e338a291d4b0dfc76)
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we add from a fetched URL we are supposed to turn the resulting
source tree into a git repository (if it isn't already one). However, we
were using the older deprecated option name here instead of the
positional argument, so "devtool add -f <url>" resulted in the repo
being created but "devtool add <url>" didn't, which was wrong.
Also update the oe-selftest tests to check that this worked.
(From OE-Core rev: a7b6b1f8cc1c096724f794ac9dee312b0f771f66)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The npm class just installs whatever is in ${S}; if you're using
externalsrc in conjunction with it the symlinks (oe-workdir and oe-logs
by default) plus singletask.lock will end up in the final package, which
isn't really right. Introduce a variable so we know the path the files
will be installed into within npm.bbclass, and append to do_install
within the workspace bbappend to delete the files.
(From OE-Core rev: 766845e06db9d7d595e836ea1364c16fa132a413)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The code here for running do_configure if it hadn't already been run was
using the wrong string substitution parameters; fix it and test it.
(From OE-Core rev: b2677a4448dbc42e523c731b953b44006749252c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default the sdk-install subcommand expects to restore the requested
items from sstate and fails if it can't. If the user is OK with building
from source, add a -s/--allow-build option to allow them to do that. In
the process, ensure we show the status output while we're installing.
Also add the missing header to the top of the file.
(From OE-Core rev: a86b426cdd465ec5cb08bb5fa7729e4e673d94bb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otherwise (if the symlink is named .config) kernel build considers
source tree as dirty and fails.
[YOCTO #9270]
(From OE-Core rev: d36699b28c661880957d744420df9e23cdd76957)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The extra directory next to the recipe should only be created if there
are files to put into it; currently only the npm plugin does this. I
didn't notice the issue earlier because the test was actually able to
succeed under these circumstances if the recipe file came first in the
directory listing, which was a fault in my original oe-selftest test;
apparently on some YP autobuilder machines the order came out reversed.
With this change we can put the oe-selftest test that highlighted the
issue back to the way it was, with an extra check to reinforce that only
a single file should be created.
(From OE-Core rev: b8b778345eb0997c2cd952a1f61fdd2050b6b894)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"npm shrinkwrap" creates a file that ensures that the exact same
versions get fetched the next time the recipe is built. lockdown is
similar but also includes sha1sums of the modules thus validating they
haven't changed between builds. These ensure that the build is
reproducible.
Fixes [YOCTO #9225].
(From OE-Core rev: 277377f13b2b771915eb853e336ca24b84523ed1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
