Update to the 5.1.2 release of the 5.1 series for buildtools.
(From OE-Core rev: 1d6d438b10f5956d523742c5357e7942f8d154fd)
Signed-off-by: Aleksandar Nikolic <aleksandar.nikolic@zeiss.com>
Signed-off-by: Steve Sakoman <steve@sakoman.com>
We want the results directory to be visable to other users, tweak the
permissions of the created directory to ensure this is the case.
(From OE-Core rev: bf121dc86f2c3443673f5ff3d486237678044479)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit ed9d887e8d71a800db19826264de552f7736dc6a)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
The ide-sdk command bootstraps the SDK from the bitbake environment
before the IDE configuration is generated. In the case of the eSDK
installer, the bootstrapping is performed during the installation of
the eSDK installer. Running the ide-sdk plugin from an eSDK installer
based setup would require skipping the bootstrapping and probably taking
some other differences into account when generating the IDE
configurations.
This would be possible. But it will probably never be implemented, as
running devtool ide-sdk directly from the bitbake environment is much
more flexible.
Also, some of the recent improvements that have made it into the core
have the potential to make the eSDK installer obsolete at some point in
the future:
- bitbake-layers create-layers-setup replicates the layers
- bitbake-config-build replicates the build configuration
- The new sstate mirror features replicate the sstate
- bblock locks the sstate more flexible than the eSDK installer
- devtool ide-sdk bootstraps the SDK directly from the bitbake
environment. The same environment-setup... file is provided with
--mode=shared.
The devtool modify based workflow is supported since always by devtool
and also the default --mode of devtool ide-sdk.
These functions essentially cover what the eSDK installer does without
a need for the current implementation of the eSDK installer and the
populate_sdk_ext, which is hard to maintain and takes a lot of time to
build.
This means that instead of making the ide-sdk plugin compatible with the
eSDK installer, we should rather replace the current implementation of
the eSDK installer and populate_sdk_ext with an implementation that can
replicate a normal bitbake environment in a convenient way where the
ide-sdk plugin also just works without additional complexity.
(From OE-Core rev: a5e7ff4424a68335fc768e49a232a58011a5b160)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Steve Sakoman <steve@sakoman.com>
The debug_build_config function was never called. Compiling with debug
optimized compiler flags was not working. Even with the
--debug-build-config flag set, the build configuration from the recipe
was used.
The devtool ide-sdk --debug-build-config approach didn't work very well
anyway. The problem is that changing the bbappend file doesn't work
while bitbake uses the bbappend file. As a workaround, it would be
possible to parse the recipe, get DEBUG_BUILD and the path to the append
file, exit tinfoil, change the bbappend file, reopen tinfoil and do what
ide-sdk is supposed to do. Such an implementation would be complicated
and slow.
Therefore, the code that was originally supposed to implement this is
removed from ide-sdk and the new --debug-build function of devtool
modify is used instead. Additionally, a hint should be given on how to
manually add DEBUG_BUILD = '1' to bbappend.
This is compatible with the VSCode Bitbake plug-in, which does not
support this parameter anyway.
(From OE-Core rev: 8753ddc7a42a09eec9b12af97b2b511b2970d83c)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Sort the keys of the generated CMakeUserPreset.json file to make it
easier to search and compare.
(From OE-Core rev: ad633eb3b90adb1087609c97ab8dc83ca0f08ad2)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Add a new option --debug-builds to automatically add DEBUG_BUILD = “1”
to the bbappend file of this recipe. This is especially useful when
invoking devtool modify before invoking devtool ide-sdk to perform a
remote debugging session.
(From OE-Core rev: c1bea1549d3bc47845b7c23158d48fad8e17277e)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Having all oe-selftest results on top of each other results in a large 640MB
json file which is hard to use. Split the results out per machine and test type.
This also stops the toolchain raw logs from overwriting each other meaning more
than one MACHINE is preserved.
(From OE-Core rev: 8717a2e2161378bab4e27d515a71396b2a6bcf00)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 4b890f04bc7d147b4a11b824a84f3d2abd75ac54)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
The duration values have pointless amounts of precision. Removing some of the
least significant digits reduces result size and makes the results easier to read.
(From OE-Core rev: 7a95226404e41e878858afcc383d26fb534ccf16)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit a789a2e6d97bb8efd663226a17db8d1ca6c1e40f)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
We've improved the data stored for reproduicible builds. Teach resulttool how
to apply those cleanups when reprocessing data so we can reduce results file
sizes and make the data easier to process.
(From OE-Core rev: 316535d421be32d773a4f98beea5bf2aabfccefb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit b799c57ae6d61c1b1c7035c8a2c4ba6ee08d1a81)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Improve the rawlogs handling to include ltp logs as well as the ptest ones to
reduce the size of the results git repos.
(From OE-Core rev: 8a34083bf097bf6a8362ce7f9b86fba5662a27bd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit a0a1954d559609c2c1ca16936d0d68eb3c4c6b45)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Storing the log files inside the testresults git repo isn't scaling and isn't
really appropriate use of a git repository. Allow these to be optionally stored
in a separate filesystem location so the git repo can remain managable.
(From OE-Core rev: 174e86868178f817f2bb6b3d9c7224a4352144ed)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 1afc0f3d7e93fa8496be241e9622d3b9a6904bd5)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
When using store mode, --all was broken as not all files were being preserved.
Fix this by limiting the scope of the git rm command.
(From OE-Core rev: ad850837d3a45fa7cc094e3eb9c059120664c8e2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 9604561d2022b6c76b1cb4186d40800d1affdd2b)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Using 4 space indentation in resulted in hundreds of megabytes of extra file size
in general use. Reduce this to make filesizes more managable and reduce the processing
cost. Some level of indentation and spacing does make the files more readable and allows
use of git diff so we need to retain some of it.
(From OE-Core rev: b8be3ac506bb39665390c770f72de2ca359670b1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit a274cdcaf852cca9497f0358f44dda99c06aacbe)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
We have a challenge on the autobuilder where test results from both OE-Core
and poky are being mixed together during result storage which is confusing the
data. Add a way to filter to specific revisions as the least worst way to fix
the various issues this is causing.
(From OE-Core rev: 42a21e6f942208da75ae1121468379044ece77dc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 3f276a0dc65341668788853be2cf27ab6aa12b13)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Update to the 5.1 release of the 5.1 series for buildtools.
(From OE-Core rev: 4f58037a49ef538d89d9c6df81b1b2d8a2eab4d7)
Signed-off-by: Aleksandar Nikolic <aleksandar.nikolic@zeiss.com>
Signed-off-by: Steve Sakoman <steve@sakoman.com>
https://nvd.nist.gov/general/news/cvss-v4-0-official-support
CVSS v4.0 was released in November 2023
NVD announced support for it in June 2024
Current stats are:
* cvss v4 provided, but also v3, so cve-check showed a value
sqlite> select count(*) from nvd where scorev4 != 0.0 and scorev3 != 0.0;
2069
* only cvss v4 provided, so cve-check did not show any
sqlite> select count(*) from nvd where scorev4 != 0.0 and scorev3 = 0.0;
260
(From OE-Core rev: 7ce34ce58f83bc02fa2c04bec54e358e8614157e)
Signed-off-by: Peter Marko <peter.marko@siemens.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 358dbfcd80ae1fa414d294c865dd293670c287f0)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
After commit d74bfb2d5c9e6247e4c0a3c2fdba0cc4a7585395:
"linux-yocto: Enable l2tp drivers when ptest featuee is on"
was merged, oe-selftest efibootpartition.GenericEFITest.test_boot_efi
breaks due to space issues.
Increase the disk space available to avoid this and allow functional
automated testing again.
(From OE-Core rev: 76f91dba302330c89c4a742e4ef24ec1898d130f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit eb76c15de881a56ead0a18f6428c5564291249c9)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Update to the 5.0.3 release of the 5.0 series for buildtools.
(From OE-Core rev: c922ca720a0c3b7b4d3d3187539e7cf77d93d457)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are times that a user might not have SHELL set for some reason.
We should default back to a known shell in the event that SHELL is not
set.
(From OE-Core rev: 9f3099b7eddccf2b7328c0fdd6423269d17138ce)
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
in case there is no tap device the script tries to
generate a new one.
The new device is then unguarded for a moment, so
the newly generated device could be acquired
by a different instance or user, before it is locked to
the instance with acquire_taplock.
To fix that keep generating new tap devices in case
the lock can't be acquired up to 5 times.
If no tap device can be locked it fails in the existing
error handling
(From OE-Core rev: 23876576d054ebbab9b02c0012782aa56feda123)
Signed-off-by: Konrad Weihmann <kweihmann@outlook.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A variable was mistyped in an error message resulting in this error:
NameError: name 'tempalte_name' is not defined. Did you mean: 'template_name'?
(From OE-Core rev: 275a3c015d37729c3b0c9cc4395d50ea2f210f02)
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
devtool modify generates a bbappend for kernel recipes which contains:
SRCTREECOVEREDTASKS="\
do_fetch \
do_kernel_checkout \
do_kernel_configcheck \
do_unpack \
do_validate_branches \
"
do_patch[noexec] = "1"
If the linux-yocto kernel is used, this is redundant. The
linux-yocto.bbclass already does the same:
linux-yocto sets SRCTREECOVEREDTASKS to
SRCTREECOVEREDTASKS="\
do_fetch \
do_kernel_checkout \
do_kernel_configcheck \
do_patch \
do_unpack \
do_validate_branches \
"
Also the do_patch[noexec] is redundant because the purpose of
SRCTREECOVEREDTASKS is to delete these tasks if the externalsrc.bbclass
is used.
The default value of SRCTREECOVEREDTASKS initialized in
externalsrc.bbclass is:
SRCTREECOVEREDTASKS ?= "do_patch do_unpack do_fetch"
This is fine for kernels which do not inherit the linux-yocto.bbclass.
The code in devtool modify is redundant and therefore removed.
(From OE-Core rev: 94ff1be36a1eeef7ddceb4fcf20425a03cd052de)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop the redundant generation of the do_configure:append section for the
kernel. The same append is generated twice:
if bb.data.inherits_class('kernel', rd):
f.write('\ndo_configure:append() {\n'
' cp ${B}/.config ${S}/.config.baseline\n'
' ln -sfT ${B}/.config ${S}/.config.new\n'
'}\n')
KCONFIG_CONFIG_ENABLE_MENUCONFIG ??= "true"
KCONFIG_CONFIG_ROOTDIR ??= "${B}"
if rd.getVarFlag('do_menuconfig', 'task'):
f.write('\ndo_configure:append() {\n'
' if [ ${@oe.types.boolean(d.getVar("KCONFIG_CONFIG_ENABLE_MENUCONFIG"))} = True ]; then\n'
' cp ${KCONFIG_CONFIG_ROOTDIR}/.config ${S}/.config.baseline\n'
' ln -sfT ${KCONFIG_CONFIG_ROOTDIR}/.config ${S}/.config.new\n'
' fi\n'
'}\n')
In contradiction to the first code block the second code block considers
the variables which is correct.
(From OE-Core rev: b0733c440e861ed7bf70efdd9b7a73afb4701218)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
runqemu currently only supports scsi, ide and virtio drive types.
Implement QB_DRIVE_TYPE=/dev/mmcblk which adds an sdhci-pci device and
mounts the rootfs file as an sd card.
(From OE-Core rev: 0740896afbe13f37058e990a0a13b2b51bba70fd)
Signed-off-by: Alessandro Pecugi <alessandro.pecugi@seco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The pattern `-serial` matches also `-device usb-serial` and `virtio-serial`
which are not the desired parameter. This causes the serial console ttyS1 is
missing and Systemd's getty@ttyS1 fails constantly.
(From OE-Core rev: b6d035894120b45b42f146ab5b3110522c58d178)
Signed-off-by: Jörg Sommer <joerg.sommer@navimatix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds the functionality to convert the results of the
testresults.json file to a unit test report in JUnit XML format. The
unit test report can be used in the CI/CD pipeline to display the test
results.
To use the resulttool scripts, first source oe environment, then run the
entry point script to look for help.
$ resulttool
To generate the unit test report, execute the below
$ resulttool junit <json_file>
By default the unit test report is stored as
<build_dir>/tmp/log/oeqa/junit.xml.
(From OE-Core rev: 3f9be03946243feaa09b908d7010899769091fe6)
Signed-off-by: Clara Kowalsky <clara.kowalsky@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a script that converts the cve-check result from the JSON format
to the TEXT format.
(From OE-Core rev: da4e01dfa538578936e565413871a7496b8752df)
Signed-off-by: Marta Rybczynska <marta.rybczynska@ygreky.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
create_npm.py duplicated the logic for matching licenses from files and
also finding them. This patch refactors the code to reuse the license
utils. This will make the code more maintainable and also align both
behaviors. For instance, some licenses weren't matched properly because
the duplicate logic did not support the difference in format in the md5
tables for COMMON_LICENSE_DIR and licenses.csv.
This is also faster since the license files were being read twice.
The result is slightly more accurate since the utils have better
implementations, and I was able to reuse the logic for the root PN
package, as well as the base LICENSE variable.
I chose to extract generate_common_licenses_chksums into create.py
since it can be considered a general utility function to allow
other recipetool creators to refer to COMMON_LICENSE_DIR files.
I updated the wording in the code when appropriate.
v3:
- added commit
- this replaces the commit that added all the COMMON_LICENSE_DIR md5
to licenses.csv
(From OE-Core rev: 7bc18bed63b94689890bcde63402d7cc1cedffa9)
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The npm recipetool handler redefines the license code the could be
unified. In order to do this refactoring, extract the bits we'll
need into separate functions.
guess_license() is renamed to find_licenses() and is split into
find_license_files() and match_licenses().
(From OE-Core rev: f1ec28feaea8ea6a2df894dd4ddba561c8a04ed2)
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some npm packages do not copy the LICENSE or COPY file into their
git repository. They'll instead simply use SPDX identifiers in their
package.json. A fallback for those repositories attempted to match
the README file to a license file instead, which had a very low
probability of success.
This commit replaces this fallback with parsing the package.json and
looking for the license in COMMON_LICENSE_DIR. If the license is not
found, "Unknown" will still be produced.
This also generates "Unknown" for packages which had no README file,
which could silently not appear in the generated recipe. The user was
more likely to miss them.
Co-authored-by: Tanguy Raufflet <tanguy.raufflet@savoirfairelinux.com>
(From OE-Core rev: 445604cfc4a5813ea635f18053cd1f673bf0b830)
Signed-off-by: Tanguy Raufflet <tanguy.raufflet@savoirfairelinux.com>
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make some minor fixes to grammar and layout, and add a short new section
describing how to setup and use the patchtest selftests properly.
(From OE-Core rev: 264185d2cfa31b1cf2534a8de21e4b17bb5bbf79)
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
'UPDATE' as a name is somewhat unfortunate as the variable is intended only for
the 'devtool upgrade' operation and devtool also has an 'update-recipe' operation.
(From OE-Core rev: 4467aa0661e233f44c4ce029428c67d88fccfc07)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Break out the code that parse IMAGE_BOOT_FILES to a common library.
(From OE-Core rev: 1e07fe51bdb24070308c85e83df0b80ab9f83cea)
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Konrad Weihmann <kweihmann@outlook.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BPN isn't correct, as it is set to 'cmake' when 'cmake-native' is being upgraded
(or libva for libva-initial etc.)
(From OE-Core rev: e634316547f86ce5662fa4899440a5af1047d494)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will allow 'lockstep upgrades' of such recipes, improving success
rates in automated version updating process.
devtool check-upgrade-status now prints:
These recipes need to be upgraded together {
glib-2.0 2.80.2 2.80.4 Anuj Mittal <anuj.mittal@intel.com>
glib-2.0-initial 2.80.2 2.80.4 Anuj Mittal <anuj.mittal@intel.com>
}
These recipes need to be upgraded together {
util-linux 2.39.3 2.40.2 Chen Qi <Qi.Chen@windriver.com>
util-linux-libuuid 2.39.3 2.40.2 Chen Qi <Qi.Chen@windriver.com>
}
These recipes need to be upgraded together {
cmake 3.29.3 3.30.0 Unassigned <unassigned@yoctoproject.org>
cmake-native 3.29.3 3.30.0 Unassigned <unassigned@yoctoproject.org>
}
etc.
(From OE-Core rev: 7874aea5c62be3e8dbd19e04fce5389c5ed7aab6)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Putting various things in a tuple is an anti-pattern of sorts, as the consumers
have to unpack it into local variables for readability, or access items directly
with indexes, which makes code pretty much unreadable.
(From OE-Core rev: e86aa26d209eb9809198f6dd40cd058366318e3d)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds a script to pull the SPDX license data and update the license list
JSON data, as well as update the license directory.
(From OE-Core rev: cc2eb66fc0389664501baf57808e23f4cb4ee479)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Although setting hash_seed is handled for the rootfs plugin case, but
this is missed when deploying an empty ext partition.
(From OE-Core rev: 0202fb594fb05098cb8d8b6088e63beb40b5906e)
Signed-off-by: Adithya Balakumar <adithya.balakumar@toshiba-tsip.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is often a need to extract a value from a Makefile, and standard
GNU Make doesn't provide a way to do this. This script lets you access
values from Makefiles directly:
$ makefile-getvar curl/tests/server/Makefile noinst_PROGRAMS
getpart resolve rtspd sockfilt sws tftpd fake_ntlm socksd disabled mqttd
(From OE-Core rev: 881aa40d12d9dde73a932277093e5ceca8eb5c68)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For some recipes, such as those that inherit cargo-update-recipe-crates,
we need to run additional tasks once the new sources have been unpacked.
Introduce a new variable RECIPE_UPDATE_EXTRA_TASKS which is a space-
delimited list of tasks to run after the new sources have been
unpacked in scripts/lib/devtool/upgrade.py ugrade() method.
(From OE-Core rev: 59894f3b5b0bc257837d7ce4ea684f1d8c382cec)
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Test installation" step fails with some harmless error messages
(see [1]). This can however make a user think that the buildtools
have not been installed correctly.
Two reasons for the error messages:
- some envvars in the environment-setup-<arch>-pokysdk-linux file
start and end with double quotes (e.g., PATH) and are as such
written into python os.environ. This leads that their usage is
not valid later when testing the installation. This patch removes
the double quotes before writing, if they are present.
- if installation directory (install_dir), given through the option
--directory, is given as a relative path, checking if the path to
a tool (e.g., gcc) in buildtools starts it will always fail. This
patch converts the install_dir variable to an absolute path.
[1]
ERROR: Something went wrong: tar not found in ./build-tools
ERROR: Something went wrong: installation failed
(From OE-Core rev: e4eb0b14ecf9bd2fba13260441c9d86eb348f41e)
Signed-off-by: Aleksandar Nikolic <aleksandar.nikolic@zeiss.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No need to validate with the md5 checksum, as the file is not even
uploaded to the Yocto release webpage (the download never failed due
to a wrong indentation of an else statement). For validation purposes,
use the sha256 checksum only.
(From OE-Core rev: b740d2f9d40aef1e18c022d1e82b4fb2c5c1fc22)
Signed-off-by: Aleksandar Nikolic <aleksandar.nikolic@zeiss.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we check for empty variables, it does not make sense to print their
content in case they are empty.
Additionally, the error message in the 'kernel' check attempted to print
the wrong variable ('target') which was not even defined, yet.
Also, raising WicError doesn't require an extra newline.
(From OE-Core rev: f31cf475d0235f42d73aeec07694f79b9937fd76)
Signed-off-by: Enrico Jörns <ejo@pengutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The siteconfig code was only used for 5 cache values. The complexity added to sstate
to support this code was considerable and the runtime much more significant than
any benefit the cache files would have added. Drop the support for this which
was only used minimally for ncurses and zlib.
(From OE-Core rev: f3766dc038f7ba9780ddaf5eb8d27385ea31d7d0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update tooltip to include the commit hash link to the poky repository
(From OE-Core rev: 1187a460c2608369df8de08fe52a5542e4ab6ecd)
Signed-off-by: Ninette Adhikari <ninette@thehoodiefirm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tweak recipetool and devtool to correctly use UNPACKDIR. This allows some
simplification of the code. This patch makes things basically work but there
are likely deeper improvements that can be made now that WORKDIR != UNPACKDIR.
(From OE-Core rev: d2eeaa88b27a2875c419591d1d91bcc85d7b129c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
