[ Upstream commit 7417b1b1f3 ]
Always assign *val to 0 in cci_read(). This has the benefit of not
requiring initialisation of the variables data is read to using
cci_read(). Once smatch is fixed, it could catch the use of uninitialised
reads.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b4667ea67 ]
In v4l2_async_create_ancillary_links(), ancillary links are created for
lens and flash sub-devices. These are sub-device to sub-device links and
if the async notifier is related to a V4L2 device, the source sub-device
of the ancillary link is NULL, leading to a NULL pointer dereference.
Check the notifier's sd field is non-NULL in
v4l2_async_create_ancillary_links().
Fixes: aa4faf6eb2 ("media: v4l2-async: Create links during v4l2_async_match_notify()")
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
[Sakari Ailus: Reword the subject and commit messages slightly.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Allow decoder drivers to enable set the ignore_streaming flag on their
CAPTURE queue, to allow queuing jobs to the M2M ready queue and perform
firmware sequence analysis with just a streaming OUTPUT queue and
available bitstream data.
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add a control V4L2_CID_MPEG_VIDEO_AVERAGE_QP to report the average QP
value of the current encoded frame. The value applies to the last
dequeued capture buffer.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
VPU use v4l2_format_info to calculate some parameters for each format now,
such as width,height,stride,bytesperline...
However v4l2 common level hasn't support YUV24 format.
So we need to add YUV24 info.
Signed-off-by: TaoJiang <tao.jiang_2@nxp.com>
Reviewed-by: Ming Qian <ming.qian@nxp.com>
-----BEGIN PGP SIGNATURE-----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=zdH0
-----END PGP SIGNATURE-----
Merge tag 'v6.6.34' into lf-6.6.y
This is the 6.6.34 stable release
* tag 'v6.6.34': (2530 commits)
Linux 6.6.34
smp: Provide 'setup_max_cpus' definition on UP too
selftests: net: more strict check in net_helper
...
Signed-off-by: Jason Liu <jason.hui.liu@nxp.com>
Conflicts:
arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
drivers/net/ethernet/freescale/fec_ptp.c
drivers/pmdomain/imx/imx8mp-blk-ctrl.c
drivers/usb/dwc3/host.c
tools/perf/util/pmu.c
commit 6d8acd02c4 upstream.
struct v4l2_async_notifier has several list_head members, but only
waiting_list and done_list are initialized. notifier_entry was kept
'zeroed' leading to an uninitialized list_head.
This results in a NULL-pointer dereference if csi2_async_register() fails,
e.g. node for remote endpoint is disabled, and returns -ENOTCONN.
The following calls to v4l2_async_nf_unregister() results in a NULL
pointer dereference.
Add the missing list head initializer.
Fixes: b8ec754ae4 ("media: v4l: async: Set v4l2_device and subdev in async notifier init")
Cc: <stable@vger.kernel.org> # for 6.6 and later
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 46bc0234ad upstream.
The V4L2 device used to be set when the notifier was registered but this
has been moved to the notifier initialisation. Don't touch the V4L2 device
if registration fails.
Fixes: b8ec754ae4 ("media: v4l: async: Set v4l2_device and subdev in async notifier init")
Cc: <stable@vger.kernel.org> # for 6.6 and later
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9537a8425a upstream.
The notifier_entry of a notifier is not re-initialised after unregistering
the notifier. This leads to dangling pointers being left there so use
list_del_init() to return the notifier_entry an empty list.
Fixes: b8ec754ae4 ("media: v4l: async: Set v4l2_device and subdev in async notifier init")
Cc: <stable@vger.kernel.org> # for 6.6 and later
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ed4477f2e upstream.
After the new V4L2 device node was registered, some additional
initialization was done before the device node was marked as
'registered'. During the time between creating the device node
and marking it as 'registered' it was possible to open the
device node, which would return -ENODEV since the 'registered'
flag was not yet set.
Hold the videodev_lock mutex from just before the device node
is registered until the 'registered' flag is set. Since v4l2_open
will take the same lock, it will wait until this registration
process is finished. This resolves this race condition.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: <stable@vger.kernel.org> # for vi4.18 and up
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f2bf6cd8f4 ]
Turn on the privacy LED only if streamon succeeds. This can be done after
enabling streaming on the sensor.
Fixes: b6e10ff6c2 ("media: v4l2-core: Make the v4l2-core code enable/disable the privacy LED if present")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 009905ec50 ]
The subdev .s_stream() operation must not be called to start an already
started subdev, or stop an already stopped one. This requirement has
never been formally documented. Fix it, and catch possible offenders
with a WARN_ON() in the call_s_stream() wrapper.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Stable-dep-of: f2bf6cd8f4 ("media: v4l: Don't turn on privacy LED if streamon fails")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34d7bf1c8e ]
When support for streams was added to the V4L2 subdev API, the
v4l2_subdev_crop structure was extended with a stream field, but the
field was not handled in the core code that translates the
VIDIOC_SUBDEV_[GS]_CROP ioctls to the selection API. Fix it.
Fixes: 2f91e10ee6 ("media: subdev: add stream based configuration")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f94b49a5b ]
The entity->name (i.e. name) is allocated in v4l2_m2m_register_entity
but isn't freed in its following error-handling paths. This patch
adds such deallocation to prevent memleak of entity->name.
Fixes: be2fff6563 ("media: add helpers for memory-to-memory media controller")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d92e7a013f ]
Some sensors, e.g. Sony IMX290, are using little-endian registers. Add
support for those by encoding the endianness into Bit 20 of the register
address.
Fixes: af73323b97 ("media: imx290: Convert to new CCI register access helpers")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: Fixed commit message.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd93cc245d ]
Add CCI_REG_WIDTH() macro to obtain register width in bits and similarly,
CCI_REG_WIDTH_BYTES() to obtain it in bytes.
Also add CCI_REG_ADDR() macro to obtain the address of a register.
Use both macros in v4l2-cci.c, too.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Stable-dep-of: d92e7a013f ("media: v4l2-cci: Add support for little-endian encoded registers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
A warning is emitted when meta neoisp formats description is requested,
this patch adds the missing descriptions for the following formats:
- V4L2_META_FMT_NEO_ISP_PARAMS
- V4L2_META_FMT_NEO_ISP_STATS
Signed-off-by: Julien Vuillaumier <julien.vuillaumier@nxp.com>
Acked-by: Jason Liu <jason.hui.liu@nxp.com>
[ Upstream commit 3de6ee94aa ]
The list deletion call dropped here is already called from the
helper function in the line before. Having a second list_del()
call results in either a warning (with CONFIG_DEBUG_LIST=y):
list_del corruption, c46c8198->next is LIST_POISON1 (00000100)
If CONFIG_DEBUG_LIST is disabled the operation results in a
kernel error due to NULL pointer dereference.
Fixes: 28a1295795 ("media: v4l: async: Allow multiple connections between entities")
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* origin/capture/media: (6 commits)
Revert "media: v4l2-ioctl: clear fields in s_parm"
media: v4l2: export video_usercopy function
Revert "media: v4l2-subdev.h: remove obsolete g/s_parm"
MLK-20724: uapi: add RGBA to exend V4L2 standard format for android usage
MLK-9662 [V4L2 Capture] Revert patch to re-add support for _G_CHIP_IDENT
...
Enable stream API since it's an experimental feature and need to
enable explicitly.
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Robby Cai <robby.cai@nxp.com>
This patch forwards IPUv3 common driver from imx_4.19.y kernel.
This includs IPUv3 common, IPUv3 prefetch engine and VDOA support.
Reviewed-by: Sandor Yu <Sandor.yu@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
[ Aisheng: squash legacy patches ]
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
[ Liu Ying: Use platform_get_irq() to get vdoa irq, not platform_get_resource() ]
[ Liu Ying: Check bypass_reset to do internal reset in ipu_probe() ]
Signed-off-by: Liu Ying <victor.liu@nxp.com>
[ Liu Ying: Set ipu->online to false if device_reset() fails ]
Signed-off-by: Liu Ying <victor.liu@nxp.com>
[ Liu Ying: Call dev_err_probe() if device_reset() fails in ipu_probe() ]
Signed-off-by: Liu Ying <victor.liu@nxp.com>
[ Robby Cai: Update class_create() api ]
Signed-off-by: Robby Cai <robby.cai@nxp.com>
This reverts commit b71c99801e.
Signed-off-by: Oliver Brown <oliver.brown@freescale.com>
(cherry picked from commit 5c74966c0e)
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Conflicts:
drivers/media/v4l2-core/v4l2-ioctl.c
Since the stream API is still experimental it is currently locked away
behind the internal, default disabled, v4l2_subdev_enable_streams_api flag.
Advertising V4L2_SUBDEV_CAP_STREAMS when the streams API is disabled
confuses userspace. E.g. it causes the following libcamera error:
ERROR SimplePipeline simple.cpp:1497 Failed to reset routes for
/dev/v4l-subdev1: Inappropriate ioctl for device
Don't report V4L2_SUBDEV_CAP_STREAMS when the streams API is disabled
to avoid problems like this.
Reported-by: Dennis Bonke <admin@dennisbonke.com>
Fixes: 9a6b5bf4c1 ("media: add V4L2_SUBDEV_CAP_STREAMS")
Cc: stable@vger.kernel.org # for >= 6.3
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Replace a goto-based loop by a while loop.
Suggested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The CSI2 specification specifies a standard method to access camera sensor
registers called "Camera Control Interface (CCI)".
This uses either 8 or 16 bit (big-endian wire order) register addresses
and supports 8, 16, 24 or 32 bit (big-endian wire order) register widths.
Currently a lot of Linux camera sensor drivers all have their own custom
helpers for this, often copy and pasted from other drivers.
Add a set of generic helpers for this so that all sensor drivers can
switch to a single common implementation.
These helpers take an extra optional "int *err" function parameter,
this can be used to chain a bunch of register accesses together with
only a single error check at the end, rather than needing to error
check each individual register access. The first failing call will
set the contents of err to a non 0 value and all other calls will
then become no-ops.
Link: https://lore.kernel.org/linux-media/59aefa7f-7bf9-6736-6040-39551329cd0a@redhat.com/
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
It is often useful to see when streaming for a device is being enabled
or disabled. Add debug prints for this to v4l2_subdev_enable_streams()
and v4l2_subdev_disable_streams().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The routing parameter of v4l2_subdev_set_routing_with_fmt() is missing
'const'. Add it.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Now that the kernel drivers have been fixed to initialize the stream
field, and we have the client capability which the userspace uses to say
it has initialized the stream field, we can drop the implicit zeroing of
the stream field in the various check functions.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Define one uncompressed capture format V4L2_PIX_FMT_MT2110R in order to
support 10bit for H264 in mt8195.
Signed-off-by: Mingjia Zhang <mingjia.zhang@mediatek.com>
Co-developed-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Define one uncompressed capture format V4L2_PIX_FMT_MT2110T in order to
support 10bit for AV1/VP9/HEVC in mt8195.
Signed-off-by: Mingjia Zhang <mingjia.zhang@mediatek.com>
Co-developed-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Set the v4l2_device already in async notifier init, so struct device
related to it will be available before the notifier is registered. This
requires separating notifier initialisation into two functions, one that
takes v4l2_device as its argument, v4l2_async_nf_init and
v4l2_async_subdev_nf_init, for sub-device notifiers. Registering the
notifier will use a single function, v4l2_async_nf_register.
This is done in order to make struct device available earlier, during
construction of the async connections, for sensible debug prints.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Support matching V4L2 async sub-devices based on particular fwnode
endpoint. This makes it possible to instantiate multiple V4L2 sub-devices
based on given fwnode endpoints from a single device, based on driver
needs.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When an async sub-device is registered, it used to be that the first one
of its connections were matched when found. Continue looking for matches
until a notifier no longer has any.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The list entry is initialised as a head in v4l2_async_register_subdev()
just before being added to the list. This isn't needed, drop the
initialisation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When the v4l2-async framework was introduced, the use case for it was to
connect a camera sensor with a parallel receiver. Both tended to be rather
simple devices with a single connection between them.
The framework has been since improved in multiple ways but there are
limitations that have remained, for instance the assumption an async
sub-device is connected towards a single notifier and via a single link
only.
This patch enables connecting a sub-device to one or more notifiers
simultaneously, with one or more connections per notifier. The notifier
information is moved from the sub-device to the connection and the
connections in sub-device are no longer a pointer but a linked list.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add v4l2_async_connection_unique() function for obtaining a struct
v4l2_async_connection, typically allocated by drivers together with their
own information on an external sub-device.
The relation between connections and sub-devices still remains 1:1 but
this code becomes more complex when the relation soon changes.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This patch re-arranges internal V4L2 async lists for preparation of
supporting multiple connections per sub-device as well as cleaning up used
lists.
The list of unbound V4L2 sub-devices shall be maintained for the purpose of
listing those sub-devices only, not for their bindin status. Also, the V4L2
async connections now have, instead of two list entries, a single list
entry in the notifier's list, be that either waiting or done lists, while
the notifier's asc_list is removed.
The one-to-one relation between a sub-device and a connection is still
maintained in this patch.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The connections are checked for duplicates already when the notifier is
registered. This is effectively a sanity check for driver (and possibly
obscure firmware) bugs. Don't do this when adding the connection.
Retain the int return type for now. It'll be needed very soon again.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Rename v4l2_async_subdev as v4l2_async_connection, in order to
differentiate between the sub-devices and their connections: one
sub-device can have many connections but the V4L2 async framework has so
far allowed just a single one. Connections in this context will later
translate into either MC ancillary or data links.
This patch prepares changing that relation by changing existing users of
v4l2_async_subdev to switch to v4l2_async_connection. Async sub-devices
themselves will not be needed anymore
Additionally, __v4l2_async_nf_add_subdev() has been renamed
__v4l2_async_nf_add_connection().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
V4L2 async sub-device matching originally used the device nodes only.
Endpoint nodes were taken into use instead as using the device nodes was
problematic for it was in some cases ambiguous which link might have been
in question.
There is however no need to use endpoint nodes on both sides, as the async
sub-device's fwnode can always be trivially obtained using
fwnode_graph_get_remote_endpoint() when needed while what counts is
whether or not the link is between two device nodes, i.e. the device nodes
match.
This will briefly break the adv748x driver but it will be fixed later in
the set, by patch "media: adv748x: Return to endpoint matching".
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The naming of list heads and list entries is confusing as they're named
similarly. Use _list for list head and _entry for list entries.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Pass only information required for sub-device matching to functions
checking whether the async sub-device already exists. Do the same for
debug message printing. This makes further changes to other aspects of
async sub-devices easier.
Accordingly, also perform further renames:
asd_equal as v4l2_async_match_equal,
v4l2_async_nf_has_async_subdev as v4l2_async_nf_has_async_match,
__v4l2_async_nf_has_async_subdev as
v4l2_async_nf_has_async_subdev_entry and
v4l2_async_nf_asd_valid as v4l2_async_nf_match_valid.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
