The 'flow' parameter of n_tty_receive_buf_common() is meant to be a
boolean value. So use bool and alter call sites accordingly.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230827074147.2287-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 6a4197f976
New SoC will use ttyS0 instead of ttyAML, so T7 SoC doesn't need a
OF_EARLYCON_DECLARE.
Fixes: 6a4197f976 ("tty: serial: meson: Add a earlycon for the T7 SoC")
Signed-off-by: Lucas Tanure <tanure@linux.com>
Link: https://lore.kernel.org/r/20230827082944.5100-1-tanure@linux.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 8250 BCM7271 UART is not a direct match to PORT_16550A and other
generic ports do not match its hardware capabilities. PORT_ALTR matches
the rx trigger levels, but its vendor configurations are not compatible.
Unfortunately this means we need to create another port to fully capture
the hardware capabilities of the BCM7271 UART.
To alleviate some latency pressures, we default the rx trigger level to 8.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/1692643978-16570-1-git-send-email-justin.chen@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Retrieve rs485 devicetree properties on registration of sc16is7xx ports in
case they are attached to an rs485 transceiver.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
Tested-by: Lech Perczak <lech.perczak@camlingroup.com>
Link: https://lore.kernel.org/r/20230807214556.540627-7-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When configuring a pin as an output pin with a value of logic 0, we
end up as having a value of logic 1 on the output pin. Setting a
logic 0 a second time (or more) after that will correctly output a
logic 0 on the output pin.
By default, all GPIO pins are configured as inputs. When we enter
sc16is7xx_gpio_direction_output() for the first time, we first set the
desired value in IOSTATE, and then we configure the pin as an output.
The datasheet states that writing to IOSTATE register will trigger a
transfer of the value to the I/O pin configured as output, so if the
pin is configured as an input, nothing will be transferred.
Therefore, set the direction first in IODIR, and then set the desired
value in IOSTATE.
This is what is done in NXP application note AN10587.
Fixes: dfeae619d7 ("serial: sc16is7xx")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
Tested-by: Lech Perczak <lech.perczak@camlingroup.com>
Link: https://lore.kernel.org/r/20230807214556.540627-6-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 679875d1d8 ("sc16is7xx: Separate GPIOs from modem control lines")
and commit 21144bab4f ("sc16is7xx: Handle modem status lines")
changed the function of the GPIOs pins to act as modem control
lines without any possibility of selecting GPIO function.
As a consequence, applications that depends on GPIO lines configured
by default as GPIO pins no longer work as expected.
Also, the change to select modem control lines function was done only
for channel A of dual UART variants (752/762). This was not documented
in the log message.
Allow to specify GPIO or modem control line function in the device
tree, and for each of the ports (A or B).
Do so by using the new device-tree property named
"nxp,modem-control-line-ports" (property added in separate patch).
When registering GPIO chip controller, mask-out GPIO pins declared as
modem control lines according to this new DT property.
Fixes: 679875d1d8 ("sc16is7xx: Separate GPIOs from modem control lines")
Fixes: 21144bab4f ("sc16is7xx: Handle modem status lines")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
Tested-by: Lech Perczak <lech.perczak@camlingroup.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230807214556.540627-5-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit c8f71b49ee ("serial: sc16is7xx: setup GPIO controller later
in probe") moved GPIO setup code later in probe function. Doing so
also required to move ports cleanup code (out_ports label) after the
GPIO cleanup code.
After these moves, the out_thread label becomes misplaced and makes
part of the cleanup code illogical.
This patch remove the now obsolete out_thread label and make GPIO
setup code jump to out_ports label if it fails.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
Tested-by: Lech Perczak <lech.perczak@camlingroup.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230807214556.540627-3-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sc16is7xx_config_rs485() function is called only for the second
port (index 1, channel B), causing initialization problems for the
first port.
For the sc16is7xx driver, port->membase and port->mapbase are not set,
and their default values are 0. And we set port->iobase to the device
index. This means that when the first device is registered using the
uart_add_one_port() function, the following values will be in the port
structure:
port->membase = 0
port->mapbase = 0
port->iobase = 0
Therefore, the function uart_configure_port() in serial_core.c will
exit early because of the following check:
/*
* If there isn't a port here, don't do anything further.
*/
if (!port->iobase && !port->mapbase && !port->membase)
return;
Typically, I2C and SPI drivers do not set port->membase and
port->mapbase.
The max310x driver sets port->membase to ~0 (all ones). By
implementing the same change in this driver, uart_configure_port() is
now correctly executed for all ports.
Fixes: dfeae619d7 ("serial: sc16is7xx")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
Tested-by: Lech Perczak <lech.perczak@camlingroup.com>
Link: https://lore.kernel.org/r/20230807214556.540627-2-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When there's no irq(this can be due to various reasons, for example,
no irq from HW support, or we just want to use poll solution, and so
on), falling back to poll is still better than no support at all.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20230806092056.2467-3-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In tegra_uart_hw_init(), the return value of clk_prepare_enable() should
be checked since it might fail.
Fixes: e9ea096dd2 ("serial: tegra: add serial driver")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Link: https://lore.kernel.org/r/20230817105406.228674-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the Sifive Uart is not used as the wake up source, suspend the uart
before the system enter the suspend state to prevent it woken up by
unexpected uart interrupt. Resume the uart once the system woken up.
Signed-off-by: Nick Hu <nick.hu@sifive.com>
Reviewed-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://lore.kernel.org/r/20230815090216.2575971-1-nick.hu@sifive.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The new Amlogic T7 SoC does not have a always-on uart,
so add OF_EARLYCON_DECLARE for it.
Signed-off-by: Lucas Tanure <tanure@linux.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230814080128.143613-2-tanure@linux.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In shutdown, RX DMA channel is terminated. If the DMA RX callback is
scheduled but not yet executed, while a new RX DMA transfer is started, the
callback can be executed, and then disturb the ongoing RX DMA transfer.
To avoid such a case, call dmaengine_synchronize in shutdown, after the
DMA RX channel is terminated.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230808161906.178996-7-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's rather advised to rely on DMA pause / resume instead of
clearing/setting DMA request enable bit for the same purpose. Some DMA
request/acknowledge race may encountered by doing so. We prefer to use
dmaengine_pause and resume instead to pause a dma transfer when it is
necessary.
Create two new functions (stm32_usart_rx_dma_pause, stm32_usart_rx_dma
_resume) to handle dma error when pausing/resuming.
And rename stm32_usart_start_rx_dma_cyclic() to
stm32_usart_rx_dma_start_or_resume() and use this function to resume an
rx dma transfer. If resume fail, stm32_usart_rx_dma_start_or_resume can
create a new transfer to continue.
It is also safer to close DMA before reset DMAR in stm32_usart_shutdown.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230808161906.178996-6-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create new function "stm32_usart_dma_pause_resume" that called dmaengine_
pause/resume and in case of error, terminate dma transaction.
Two other functions are created to facilitate the use of stm32_usart_dma
_pause_resume : stm32_usart_tx_dma_pause, stm32_usart_tx_dma_resume.
Equivalent functions for rx will be added in future patch.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230808161906.178996-5-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename stm32_usart_rx_dma_enabled to stm32_usart_rx_dma_started in order
to match with stm32_usart_tx_dma_started.
Modify argument of stm32_usart_rx_dma_started from uart_port structure to
stm32_port structure to match with stm32_usart_tx_dma_started.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230808161906.178996-4-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DMAT is a configuration bit so it should be set at the startup of uart
port and not when a DMA transfer begins.
This patch move set of DMAT into set_termios and remove DMAT reset except
in shutdown.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230808161906.178996-3-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's rather advised to rely on DMA pause / resume instead of
clearing/setting DMA request enable bit for the same purpose. Some DMA
request/acknowledge race may encountered by doing so. We prefer to use
dmaengine_pause and resume instead to pause a dma transfer when it is
necessary.
It is also safer to close DMA before reset DMAT in stm32_usart_shutdown.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230808161906.178996-2-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, changing the parameters of the n_gsm mux gives no direct control
to the user whether this should trigger a mux reset or not. The decision is
solely made by the driver based on the assumption which parameter changes
are compatible or not. Therefore, the user has no means to perform an
automatic mux reset after parameter configuration for non-conflicting
changes.
Add the parameter 'flags' to 'gsm_config_ext' to force a mux reset after
ioctl setting regardless of whether the changes made require this or not
by setting this to 'GSM_FL_RESTART'. This is done similar to
'GSM_FL_RESTART' in gsm_dlci_config.flags.
Note that 'GSM_FL_RESTART' is currently the only allowed flag to allow
additions here.
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20230817093231.2317-9-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are multiple places in gsm_control_command and gsm_control_reply that
derive the specific DLCI handle directly out of the DLCI table in gsm.
Add a local variable which holds this handle and use it instead to improve
code readability.
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20230817093231.2317-7-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The structure gsm_mux contains the 'unsupported' field. However, there is
currently no place in the code which increases this counter.
Increase the 'unsupported' statistics counter in the following case:
- an unsupported frame type has been requested by the peer via parameter
negotiation
- a control frame with an unsupported but known command has been received
Note that we have no means to detect an inconsistent/unsupported adaptation
sufficient accuracy as this changes the structure of the UI/UIH frames.
E.g. a one byte header is added in case of convergence layer type 2 instead
of 1 and contains the modem signal octet with the state of the signal
lines. There is no checksum or other value which indicates of this field is
correct or should be present. Therefore, we can only assume protocol
correctness here. See also 'gsm_dlci_data()' where this is handled.
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20230817093231.2317-6-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The malformed counter in gsm_mux is already increased in case of errors
detected in gsm_queue() and gsm1_receive(). gsm_dlci_command() also
detects a case for a malformed frame but does not increase the malformed
counter yet.
Fix this by also increasing the gsm_mux malformed counter in case of a
malformed frame in gsm_dlci_command().
Note that the malformed counter is not yet exposed and only set internally.
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20230817093231.2317-5-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Extend the n_gsm link statistics by a failed link open counter in
preparation for an upcoming patch which will expose these.
This counter is increased whenever an attempt to open the control channel
failed. This is true in the following cases:
- new DLCI allocation failed
- connection request (SAMB) with invalid CR flag has been received
- connection response (UA) timed out
- parameter negotiation timed out or failed
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20230817093231.2317-4-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, changing the parameters of a DLCI gives no direct control to the
user whether this should trigger a channel reset or not. The decision is
solely made by the driver based on the assumption which parameter changes
are compatible or not. Therefore, the user has no means to perform an
automatic channel reset after parameter configuration for non-conflicting
changes.
Add the parameter 'flags' to 'gsm_dlci_config' to force a channel reset
after ioctl setting regardless of whether the changes made require this or
not by setting this to 'GSM_FL_RESTART'.
Note that 'GSM_FL_RESTART' is currently the only allow flag to allow
additions here.
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20230817093231.2317-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We are used to handle "bad" states in the 'if's in the kernel. Refactor
(invert the two conditions in) __tty_buffer_request_room(), so that the
code returns from the fast paths immediately instead of postponing to
the heavy end of the function.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230816105530.3335-11-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* use bool for 'change' as it holds a result of a boolean.
* use size_t for 'left', so it is the same as 'size' which it is
compared to. Both are supposed to contain an unsigned value.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230816105530.3335-9-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use __tty_insert_flip_string_flags() for the slow path of
tty_insert_flip_char(). The former is generic enough, so there is no
reason to reimplement the injection once again.
So now we have a single function stuffing into tty buffers.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230816105530.3335-8-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The same as in the previous patch, tty_prepare_flip_string() accepts
size_t as an size argument. It returns the same size (or less). It is
unexpected that it returns a signed value and can confuse users to check
for negative values.
Instead, return the same size_t as accepted to make clear we return
values >= 0, where zero in fact means failure.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230816105530.3335-7-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All the functions accept size_t as a size argument. They finally return
the same size (or less). It is quite unexpected that they return a
signed value and can confuse users to check for negative values.
Instead, return the same size_t as accepted to make clear we return
values >= 0, where zero in fact means failure.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230816105530.3335-6-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
And add a WARN_ON_ONCE(need_flags) to make sure we are not losing flags
in __tty_insert_flip_string_flags().
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230816105530.3335-5-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
They both do the same except for flags. One mem-copies the flags from
the caller, the other mem-sets to one flag given by the caller. This can
be unified with a simple if in the unified function.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230816105530.3335-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now, that tty_buffer::data has the right type, use struct_size() for
size calculation. struct_size() makes the code less error-prone and more
readable.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230816105530.3335-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric has pointed out that we still have 3 users of do_each_thread().
Change them to use for_each_process_thread() and kill this helper.
There is a subtle change, after do_each_thread/while_each_thread g == t ==
&init_task, while after for_each_process_thread() they both point to
nowhere, but this doesn't matter.
> Why is for_each_process_thread() better than do_each_thread()?
Say, for_each_process_thread() is rcu safe, do_each_thread() is not.
And certainly
for_each_process_thread(p, t) {
do_something(p, t);
}
looks better than
do_each_thread(p, t) {
do_something(p, t);
} while_each_thread(p, t);
And again, there are only 3 users of this awkward helper left. It should
have been killed years ago and in fact I thought it had already been
killed. It uses while_each_thread() which needs some changes.
Link: https://lkml.kernel.org/r/20230817163708.GA8248@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: "Christian Brauner (Microsoft)" <brauner@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jiri Slaby <jirislaby@kernel.org> # tty/serial
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All callers of show_mem() pass 0 and NULL, so we can remove the two
arguments by directly calling __show_mem(0, NULL, MAX_NR_ZONES - 1) in
show_mem().
Link: https://lkml.kernel.org/r/20230630062253.189440-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We want to fix the serial core port DEVNAME to use a port id of the
hardware specific controller port instance instead of the port->line.
For example, the 8250 driver sets up a number of serial8250 ports
initially that can be inherited by the hardware specific driver. At that
the port->line no longer decribes the port's relation to the serial core
controller instance.
Let's fix the issue by assigning port->port_id for each serial core
controller port instance.
Fixes: 7d695d8376 ("serial: core: Fix serial_base_match() after fixing controller port name")
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230811103648.2826-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The port lock is not always held when calling serial8250_clear_IER().
When an oops is in progress, the lock is tried to be taken and when it
is not, a warning is issued:
WARNING: CPU: 0 PID: 1 at drivers/tty/serial/8250/8250_port.c:707 +0x57/0x60
Modules linked in:
CPU: 0 PID: 1 Comm: init Not tainted 6.5.0-rc5-1.g225bfb7-default+ #774 00f1be860db663ed29479b8255d3b01ab1135bd3
Hardware name: QEMU Standard PC ...
RIP: 0010:serial8250_clear_IER+0x57/0x60
...
Call Trace:
<TASK>
serial8250_console_write+0x9e/0x4b0
console_flush_all+0x217/0x5f0
...
Therefore, remove the annotation as it doesn't hold for all invocations.
The other option would be to make the lockdep test conditional on
'oops_in_progress' or pass 'locked' from serial8250_console_write(). I
don't think, that is worth it.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Cc: John Ogness <john.ogness@linutronix.de>
Fixes: d0b309a5d3 (serial: 8250: synchronize and annotate UART_IER access)
Link: https://lore.kernel.org/r/20230811064340.13400-1-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 9b9c8195f3 ("tty: n_gsm: fix UAF in gsm_cleanup_mux"), the UAF
problem is not completely fixed. There is a race condition in
gsm_cleanup_mux(), which caused this UAF.
The UAF problem is triggered by the following race:
task[5046] task[5054]
----------------------- -----------------------
gsm_cleanup_mux();
dlci = gsm->dlci[0];
mutex_lock(&gsm->mutex);
gsm_cleanup_mux();
dlci = gsm->dlci[0]; //Didn't take the lock
gsm_dlci_release(gsm->dlci[i]);
gsm->dlci[i] = NULL;
mutex_unlock(&gsm->mutex);
mutex_lock(&gsm->mutex);
dlci->dead = true; //UAF
Fix it by assigning values after mutex_lock().
Link: https://syzkaller.appspot.com/text?tag=CrashReport&x=176188b5a80000
Cc: stable <stable@kernel.org>
Fixes: 9b9c8195f3 ("tty: n_gsm: fix UAF in gsm_cleanup_mux")
Fixes: aa371e96f0 ("tty: n_gsm: fix restart handling via CLD command")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Co-developed-by: Qiumiao Zhang <zhangqiumiao1@huawei.com>
Signed-off-by: Qiumiao Zhang <zhangqiumiao1@huawei.com>
Link: https://lore.kernel.org/r/20230811031121.153237-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unify the type of tty_operations::write() counters with the 'count'
parameter. I.e. use size_t for them.
This includes changing vcc_port::chars_in_buffer to size_t to keep min()
and avoid min_t().
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Link: https://lore.kernel.org/r/20230810091510.13006-34-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some hooks in struct tty_ldisc_ops still reference buffers by 'unsigned
char'. Unify to 'u8' as the rest of the tty layer does.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810091510.13006-32-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Somewhere, we use 'char', somewhere 'unsigned char'. Unify to 'u8' as
the rest of the tty layer does.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230810091510.13006-31-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ld->ops->read() returns ssize_t. copy_to_iter() returns size_t. So
switch the variables ('size' and 'copied', respectively) to the
corresponding types.
This allows for use of min() in the next patch.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230810091510.13006-26-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty_read() is supposed to return ssize_t. It takes the return value from
iterate_tty_read(). That currently returns int. On the top of that,
iterate_tty_write() already returns ssize_t. So switch
iterate_tty_read() to ssize_t too, so that all three are consistent.
This means 'i' in tty_read() changes its type too. And while changing
that, rename this generic 'i' to more dedicated 'ret'.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230810091510.13006-25-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It simplifies the code. The "price" is we have to unify 'chunk' to be
size_t the same as 'count' is. But that change is actually correct.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230810091510.13006-24-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make do_tty_write()'s name sound similar to iterate_tty_read(). They
both do similar things, so there is no reason for so distinct names. The
new name is therefore iterate_tty_write().
Drop the unnedeed inline modifier too. Let the compiler decide.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230810091510.13006-23-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
write() passed to do_tty_write() is always ld->ops->write(). Instead,
align with iterate_tty_read() and pass the whole ld instead. This makes
the code easier to follow as it is clear what the write is. And also the
function signature is more readable.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230810091510.13006-22-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This makes all those 'char's an explicit 'u8'. This is part of the
continuing unification of chars and flags to be consistent u8.
This approaches tty_port_default_receive_buf().
Note that we do not change signedness as we compile with
-funsigned-char.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: William Hubbs <w.d.hubbs@gmail.com>
Cc: Chris Brannon <chris@the-brannons.com>
Cc: Kirk Reiser <kirk@reisers.ca>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Max Staudt <max@enpas.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de>
Cc: Jeremy Kerr <jk@codeconstruct.com.au>
Cc: Matt Johnston <matt@codeconstruct.com.au>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230810091510.13006-18-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This makes all those 'unsigned char's an explicit 'u8'. This is part of
the continuing unification of chars and flags to be consistent u8.
This approaches tty_port_default_receive_buf(). Flags to be next.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: William Hubbs <w.d.hubbs@gmail.com>
Cc: Chris Brannon <chris@the-brannons.com>
Cc: Kirk Reiser <kirk@reisers.ca>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Max Staudt <max@enpas.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de>
Cc: Jeremy Kerr <jk@codeconstruct.com.au>
Cc: Matt Johnston <matt@codeconstruct.com.au>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230810091510.13006-17-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Count passed to tty_ldisc_ops::receive_buf*(), ::lookahead_buf(), and
returned from ::receive_buf2() is expected to be size_t. So set it to
size_t to unify with the rest of the code.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: William Hubbs <w.d.hubbs@gmail.com>
Cc: Chris Brannon <chris@the-brannons.com>
Cc: Kirk Reiser <kirk@reisers.ca>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Max Staudt <max@enpas.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de>
Cc: Jeremy Kerr <jk@codeconstruct.com.au>
Cc: Matt Johnston <matt@codeconstruct.com.au>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230810091510.13006-16-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It comes from both paste_selection() and tty_port_default_receive_buf()
as unsigned (int and size_t respectively). Switch to size_t to converge
to that eventually.
Return the count as size_t too (the two callers above expect that).
Switch paste_selection()'s type of 'count' too, so that the returned and
passed type match.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230810091510.13006-13-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'size_t' is what receive_buf() expects and returns while handling count.
So switch to 'size_t'.
This renders both local 'count' and 'rcvd' in flush_to_ldisc() to be
size_t too.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230810091510.13006-12-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The counts in tty_port_client_operations hooks' are currently
represented by all 'int', 'unsigned int', and 'size_t'. Unify them all
to unsigned 'size_t' for clarity. Note that size_t is used already in
tty_buffer.c. So, eventually, it is spread for counts everywhere and
this is the beginning.
So the two changes namely:
* ::receive_buf() is called from tty_ldisc_receive_buf(). And that
expects values ">= 0" from ::receive_buf(), so switch its rettype to
size_t is fine. tty_ldisc_receive_buf() types will be changed
separately.
* ::lookahead_buf()'s count comes from lookahead_bufs() and is already
'unsigned int'.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230810091510.13006-11-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The parameters are already unsigned chars. So make them explicitly u8s,
as the rest is going to be unified to u8 eventually too.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230810091510.13006-10-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rename 'arg' to 'enable' as that is what it means.
* make 'bit' a tcflag_t, not int, as that is what cflags are.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230810091510.13006-9-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's a nop for everyone as TTY_DEBUG_WAIT_UNTIL_SENT is never set.
Provided, we have better debugging/printout mechanisms nowadays, remove
this mechanism.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230810091510.13006-8-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Line discipline variables are named 'ld' all over the tty code. Rename
these in tty_port, so that it is easier to grep for the code (namely for
"ld->ops").
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230810091510.13006-7-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only tty_ldisc_ops::read() and ::write() of n_null behave differently than
the default ldops implementations. They return %EOPNOTSUPP instead of
%EIO. So keep only those two and remove the rest ldops as they are
superfluous.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230810091510.13006-5-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
TX is handled by primary sequencer. After cancelling primary command, poll
primary sequencer's irq status instead of that of secondary.
While at it, also remove a couple of redundant lines that read from IRQ_EN
register and write back same.
Fixes: 2aaa43c707 ("tty: serial: qcom-geni-serial: add support for serial engine DMA")
Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Link: https://lore.kernel.org/r/1691578393-9891-1-git-send-email-quic_vnivarth@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter reports boot issues with duplicate sysfs entries for multiport
drivers. Let's go back to using port->line for now to fix the regression.
With this change, the serial core port device names are not correct for the
hardware specific 8250 single port drivers, but that's a cosmetic issue for
now.
Fixes: d962de6ae5 ("serial: core: Fix serial core port id to not use port->line")
Reported-by: Guenter Roeck <groeck7@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230806062052.47737-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clarifies that the LEGACY_TIOCSTI setting is safe to turn off even
when running BRLTTY, as it was introduced in commit 690c8b804a
("TIOCSTI: always enable for CAP_SYS_ADMIN").
Signed-off-by: Günther Noack <gnoack3000@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20230808201115.23993-1-gnoack3000@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unloading a hardware specific 8250 driver can produce error "Unable to
handle kernel paging request at virtual address" about ten seconds after
unloading the driver. This happens on uart_hangup() calling
uart_change_pm().
Turns out commit 04e82793f0 ("serial: 8250: Reinit port->pm on port
specific driver unbind") was only a partial fix. If the hardware specific
driver has initialized port->pm function, we need to clear port->pm too.
Just reinitializing port->ops does not do this. Otherwise serial8250_pm()
will call port->pm() instead of serial8250_do_pm().
Fixes: 04e82793f0 ("serial: 8250: Reinit port->pm on port specific driver unbind")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230804131553.52927-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After fixing the serial core port device to use port->port_id instead of
port->line, unloading a hardware specific 8250 port driver started
producing an error for "sysfs: cannot create duplicate filename".
This is happening as we are wrongly initializing port->port_id to zero
when adding back serial8250_isa_devs instances, and the serial8250:0.0
sysfs entry may already exist. For serial8250 devices, we typically have
multiple devices mapped to a single driver instance. For the
serial8250_isa_devs instances, the port->port_id is the same as port->line.
Let's fix the issue by re-initializing port_id when adding back the
serial8250_isa_devs instances in serial8250_unregister_port().
Fixes: d962de6ae5 ("serial: core: Fix serial core port id to not use port->line")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230804123546.25293-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kmemleak reports issues for serial8250 ports after the hardware specific
driver takes over on boot as noted by Tomi.
The kerneldoc for device_initialize() says we must call device_put()
after calling device_initialize(). We are calling device_put() on the
error path, but are missing it from the device remove path. This causes
release() to never get called for the devices on remove.
Let's add the missing put_device() calls for both serial ctrl and
port devices.
Fixes: 84a9582fd2 ("serial: core: Start managing serial controllers to enable runtime PM")
Reported-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20230804090909.51529-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cpm_uart_map_pram() and cpm_uart_unmap_pram() are very
similar for CPM1 and CPM2.
On CPM1 cpm_uart_map_pram() uses of_iomap() while CPM2 uses
of_address_to_resource()/ioremap(). CPM2 version will also
work on CPM1.
On CPM2 cpm_uart_map_pram() and cpm_uart_unmap_pram() has a special
handling for SMC. Just gate it by an IS_ENABLED(CONFIG_CPM2).
So move the CPM2 version into cpm_uart_core.c which is the only
user of those two fonctions and refactor to also handle CPM1 as
mentionned above.
PROFF_SMC_SIZE is only defined for SMC2 and used only there. To make
it simple, just use the numerical value 64, this is the only place
it is used and anyway there's already the same numerical value for
the alignment.
Use cpm_muram_alloc() instead of cpm_dpalloc() macro.
Then cpm_uart_cpm1.c and cpm_uart_cpm2.c are now empty and go away.
Replace printk(KERN_WARN by pr_warn( to make checkpatch happier.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/44a266106c421319aa8e700c2db52d5dcd652c0f.1691068700.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cpm_uart_freebuf() is identical for CPM1 and CPM2.
cpm_uart_allocbuf() only has a small difference between CPM1 and CPM2
as shown below:
CPM1:
if (is_con) {
/* was hostalloc but changed cause it blows away the */
/* large tlb mapping when pinning the kernel area */
mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8));
dma_addr = (u32)cpm_dpram_phys(mem_addr);
} else
mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr,
GFP_KERNEL);
CPM2:
if (is_con) {
mem_addr = kzalloc(memsz, GFP_NOWAIT);
dma_addr = virt_to_bus(mem_addr);
}
else
mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr,
GFP_KERNEL);
Refactor this by using IS_ENABLED(CONFIG_CPM1)
and move both functions in cpm_uart_core.c as they are used only there.
While doing this, add the necessary casts to silence sparse for the CPM1
part. This is because a dma alloc is not expected to be an iomem but
for CPM1 as we use DPRAM this is seen as iomem.
Also replace calls to cpm_dpxxxx() by relevant cpm_muram_xxxx() calls.
This is needed at least for cpm_dpram_phys() which is only defined
for CPM1. Just do the same for all so that cpm_dpxxxx() macros can get
droped in the future.
To silence checkpatch, replace printk(KERN_ERR by pr_err( and display
function name instead of hard coded filename. Also replace
mem_addr == NULL by !mem_addr.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/606dfdd258a4f2f2882e2e189bef37526bb3b499.1691068700.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CPMFCR_EB is the same as SMC_EB and is defined
for both CPM1 and CPM2.
CPMFCR_GBL is defined as 0 for CPM1.
Therefore the CPM2 version of cpm_set_scc_fcr() and
cpm_set_smc_fcr() can be used on both CPM1 and CPM2.
And cpm_set_brg() is already identical and just a
wrapper of cpm_setbrg().
In addition those three fonctions are only called once
from cpm_uart_core.c, so just replace the calls with
the content of the CPM2 versions of them.
And DPRAM_BASE is identical so can go in cpm_uart.h. While
moving it, use cpm_muram_addr() directly instead of the
cpm_dpram_addr() macro and remove __force tag which isn't needed.
Then cpm_uart_cpm1.h and cpm_uart_cpm2.h go away.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/6920e61fd362961ae1aeda897c8bfe1efacdc9dc.1691068700.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
uart_baudrate() is just a trivial wrapper to get_baudrate().
Use get_baudrate() directly and remove assignment in if condition.
And also remove uart_clock() which is not used since
commit 0b2a2e5b77 ("cpm_uart: Remove !CONFIG_PPC_CPM_NEW_BINDING
code")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/4d497386f576a3df768e44a04f9bb512e424c311.1691068700.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cpm_uart_init_portdesc()
smc1_lineif()
smc2_lineif()
scc1_lineif()
scc2_lineif()
scc3_lineif()
scc4_lineif()
Those functions were removed by commit 0b2a2e5b77 ("cpm_uart: Remove
!CONFIG_PPC_CPM_NEW_BINDING code"). Remove stale prototypes.
UART_SMC{1..2} and UART_SCC{1..4} and SCC_WAIT_CLOSING macros are not
used anymore since the above commit.
cpm_uart_ports[] isn't used outside cpm_uart_core.c since the
same commit, so make it static.
cpm_uart_init_smc() and cpm_uart_init_scc() don't need a forward
declaration.
FLAG_DISCARDING and IS_DISCARDING have never been used since at
least 2.6.12 and the start of git repository for kernel.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/96ef20ae1df056d1b7967871ba6e27e5b5aaeea6.1691068700.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The module_mcb_driver() will set "THIS_MODULE" to driver.owner when
register a mcb_driver driver, so it is redundant initialization to set
driver.owner in mcb_driver statement. Remove it for clean code.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20230804100843.100348-1-lizetao1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a warning reported by coccinelle:
./drivers/tty/serial/8250/8250_men_mcb.c:226:6-19: WARNING:
Unsigned expression compared with zero: data -> line [ i ] < 0
The array "line" of serial_8250_men_mcb_data is used to record the
registered serial port. When register a port failed, it will return
an error code, but the type of "line" is "unsigned int", causing
the error code to reverse. Modify the type of "data -> line" to solve
this problem.
Fixes: 2554e6ba28 ("8250_men_mcb: Read num ports from register data.")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230803142053.1308926-1-lizetao1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Any unprivileged user can attach N_GSM0710 ldisc, but it requires
CAP_NET_ADMIN to create a GSM network anyway.
Require initial namespace CAP_NET_ADMIN to do that.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Link: https://lore.kernel.org/r/20230731185942.279611-1-cascardo@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The data->line[i] is defined as unsigned int type, if(data->line[i] < 0)
is invalid, so replace data->line[i] with res.
./drivers/tty/serial/8250/8250_men_mcb.c:223:6-19: WARNING: Unsigned expression compared with zero: data->line[i] < 0.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6088
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230803084753.51253-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At least freeze, restore and thaw need to be set in order for the driver
to support system hibernation. The existing suspend/resume functions can
be reused since those functions don't touch the device's power state or
wakeup capability. Use the helper macros SET_SYSTEM_SLEEP_PM_OPS and
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS for symmetry with similar drivers.
Signed-off-by: Anton Eliasson <anton.eliasson@axis.com>
Link: https://lore.kernel.org/r/20230803-samsung_tty_pm_ops-v1-1-1ea7be72194d@axis.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit a85a6c86c2 ("driver core: platform: Clarify that
IRQ 0 is invalid"), there is no possible for
platform_get_irq() to return 0. Use the return value
from platform_get_irq().
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230803091712.596987-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As &info->lock is acquired by slgt_interrupt() under irq context, other
process context code acquiring the lock should disable irq, otherwise
deadlock could happen if the irq preempt the execution while the
lock is held in process context on the same CPU.
Lock acquisition inside set_params32() does not disable irq, and this
function is called by slgt_compat_ioctl() from process context.
Possible deadlock scenario:
slgt_compat_ioctl()
-> set_params32()
-> spin_lock(&info->lock)
<irq>
-> slgt_interrupt()
-> spin_lock(&info->lock); (deadlock here)
This flaw was found by an experimental static analysis tool I am developing
for irq-related deadlock. x86_64 allmodconfig using gcc shows no new
warning.
The patch fixes the potential deadlock by spin_lock_irqsave() like other
lock acquisition sites.
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230728123901.64225-1-dg573847474@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Members vc_col, vc_rows and vc_size_row of the struct vc_data have been
initialized in visual_init(), so it is no longer needed to initialize
them in vc_init() again.
Signed-off-by: oushixiong <oushixiong@kylinos.cn>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230803065409.461031-1-oushixiong@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a warning reported by coccinelle:
./drivers/tty/serial/ma35d1_serial.c:791:3-8:
No need to set .owner here. The core will do it.
The module_platform_driver() will set "THIS_MODULE" to driver.owner
when register a driver for platform-level devices, so it is redundant
initialization to set driver.owner in ma35d1serial_driver statement.
Remove it to silence the warning.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20230803032353.3045221-1-lizetao1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While fixing DEVNAME to be more usable, I broke serial_base_match() as the
ctrl and port prefix for device names seemed unnecessary.
The prefixes are still needed by serial_base_match() to probe the serial
base controller port, and serial tx is now broken.
Let's fix the issue by checking against dev->type and drv->name instead
of the prefixes that are no longer in the DEVNAME.
Fixes: 1ef2c2df11 ("serial: core: Fix serial core controller port name to show controller id")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202308021529.35b3ad6c-oliver.sang@intel.com
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230803071034.25571-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We are missing the serial core controller id for the serial core port
name. Let's fix the issue for sane sysfs output, and to avoid issues
addressing serial ports later on.
And as we're now showing the controller id, the "ctrl" and "port" prefix
for the DEVNAME become useless, we can just drop them. Let's standardize on
DEVNAME:0 for controller name, where 0 is the controller id. And
DEVNAME:0.0 for port name, where 0.0 are the controller id and port id.
This makes the sysfs output nicer, on qemu for example:
$ ls /sys/bus/serial-base/devices
00:04:0 serial8250:0 serial8250:0.2
00:04:0.0 serial8250:0.1 serial8250:0.3
Fixes: 84a9582fd2 ("serial: core: Start managing serial controllers to enable runtime PM")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230725054216.45696-4-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The serial core port id should be serial core controller specific port
instance, which is not always the port->line index.
For example, 8250 driver maps a number of legacy ports, and when a
hardware specific device driver takes over, we typically have one
driver instance for each port. Let's instead add port->port_id to
keep track serial ports mapped to each serial core controller instance.
Currently this is only a cosmetic issue for the serial core port device
names. The issue can be noticed looking at /sys/bus/serial-base/devices
for example though. Let's fix the issue to avoid port addressing issues
later on.
Fixes: 84a9582fd2 ("serial: core: Start managing serial controllers to enable runtime PM")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230725054216.45696-3-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Do not read the data register to clear the error flags for lpuart32
platforms, the additional read may cause the receive FIFO underflow
since the DMA has already read the data register.
Actually all lpuart32 platforms support write 1 to clear those error
bits, let's use this method to better clear the error flags.
Fixes: 42b68768e5 ("serial: fsl_lpuart: DMA support for 32-bit variant")
Cc: stable <stable@kernel.org>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20230801022304.24251-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After walking and trying to clean up the worst in the driver, I came
across the pci_driver::remove() _empty_ implementation. That would crash
the system at least during hot-unplug (or write to remove in sysfs).
There are many other problems:
* Initialization + deinitialization apparently comes from no-hotplug
support age. It needs a rewrite.
* Hairy debug macros. Drop them.
* Use of self-baked lists. Replace by list.
* The order of the functions should be inverted and fwd decls dropped.
* Coding style from the stone age. Fix.
* I assume there are many bugs, but the code is unreadable at times, so
hard to judge. There is one example posted [1].
I was able to find only one user back in 2016. So mark the driver as
BROKEN for some time. Either someone will notice and we can bring the
driver to this century. Or we will drop it completely if noone cares.
[1] https://lore.kernel.org/all/20230728123901.64225-1-dg573847474@gmail.com/
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Chengfeng Ye <dg573847474@gmail.com>
Link: https://lore.kernel.org/r/20230731090002.15680-8-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is preferred NOT to print anything from init and exit functions of a
module. (If everything goes fine.)
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230731090002.15680-5-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It makes the code more readable and less error-prone as the result is
returned and not stored in a variable newly defined inside the macro.
Note that cast to 'unsigned long' and back to 'void *' was eliminated as
info->reg_addr is 'char *' already (so the addition is per bytes
already).
This nicely cleans up the callers too.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230731090002.15680-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'status' is assigned a result from readl(). There is no need for the
variable to be 'unsigned long'. readl() returns 32bit values.
Provided, this is a Nios II driver (32-bit), there is no change in
semantics. This only makes the type explicit.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20230731080244.2698-7-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'source' is the same as 'buf'. Rename the parameter ('buf') to
'source' and drop the local variable.
Likely, the two were introduced to have a different type. But 'char' and
'unsigned char' are the same in the kernel for a long time.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230731080244.2698-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
uart code currently does the following in uart_write() and
uart_flush_buffer():
if (cond) {
WARN_ON(1);
return;
}
It can be rewritten to more obvious and more readable:
if (WARN_ON(cond))
return;
Do so.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230731080244.2698-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are some small TTY and serial driver fixes for 6.5-rc4 for some
reported problems. Included in here is:
- TIOCSTI fix for braille readers
- documentation fix for minor numbers
- MAINTAINERS update for new serial files in -rc1
- minor serial driver fixes for reported problems
All of these have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZMZCMQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym8fQCdGtm3DH+/BVKEebLUBlTb2Gz3xrIAnjeDVdP3
8Yztt4MNSYi7gvOMHQi5
=e8rX
-----END PGP SIGNATURE-----
Merge tag 'tty-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small TTY and serial driver fixes for 6.5-rc4 for some
reported problems. Included in here is:
- TIOCSTI fix for braille readers
- documentation fix for minor numbers
- MAINTAINERS update for new serial files in -rc1
- minor serial driver fixes for reported problems
All of these have been in linux-next with no reported problems"
* tag 'tty-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_dw: Preserve original value of DLF register
tty: serial: sh-sci: Fix sleeping in atomic context
serial: sifive: Fix sifive_serial_console_setup() section
Documentation: devices.txt: reconcile serial/ucc_uart minor numers
MAINTAINERS: Update TTY layer for lists and recently added files
tty: n_gsm: fix UAF in gsm_cleanup_mux
TIOCSTI: always enable for CAP_SYS_ADMIN
Each of the 4 PCI functions on ASIX AX99100 PCIe to Multi I/O
Controller can be configured as a single-port serial port controller.
The subvendor id is 0x1000 when configured as serial port and MSI
interrupts are supported.
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230724083933.3173513-4-jiaqing.zhao@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The global pointer 'sprd_port' may not zero when sprd_probe returns
failure, that is a risk for sprd_port to be accessed afterward, and
may lead to unexpected errors.
For example:
There are two UART ports, UART1 is used for console and configured in
kernel command line, i.e. "console=";
The UART1 probe failed and the memory allocated to sprd_port[1] was
released, but sprd_port[1] was not set to NULL;
In UART2 probe, the same virtual address was allocated to sprd_port[2],
and UART2 probe process finally will go into sprd_console_setup() to
register UART1 as console since it is configured as preferred console
(filled to console_cmdline[]), but the console parameters (sprd_port[1])
belong to UART2.
So move the sprd_port[] assignment to where the port already initialized
can avoid the above issue.
Fixes: b7396a38fb ("tty/serial: Add Spreadtrum sc9836-uart driver support")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20230725064053.235448-1-chunyan.zhang@unisoc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the IOControl register bits description in the page 31 of
the product datasheet, we know the bit 3 of IOControl register is
softreset, this bit will self-clearing once the reset finish.
In the probe, the softreset bit is set, and when we read this register
from debugfs/regmap interface, we found the softreset bit is still
setting, this confused us for a while. Finally we found this register
is cached, to read the real value from register, we could put it
into the regmap_volatile().
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20230724034727.17335-1-hui.wang@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
in asc_init_port, clk_prepare_enable may fail, therefore, the
return value of clk_prepare_enable should be checked.
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Link: https://lore.kernel.org/r/20230717144733.24194-1-ruc_gongyuanjun@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Macroses for name generation are not useful. They hide the real place
for object declaration. Instead, use direct names such as
'meson_uart_driver_*' and 'meson_serial_console_*' for all objects.
Additionally, rename 'MESON_SERIAL_CONSOLE_DEFINE()' to
'MESON_SERIAL_CONSOLE()', and 'MESON_UART_DRIVER_DEFINE()' to
'MESON_UART_DRIVER()' to simplify the code.
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Suggested-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230728071522.17503-1-ddrokosov@sberdevices.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If ioremap() fails, it returns NULL pointer, not ERR_PTR(), fix the
return value check and call release_mem_region() to release resource.
Fixes: c563831ba8 ("8250_men_mcb: Make UART config auto configurable")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230728085723.3195044-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Preserve the original value of the Divisor Latch Fraction (DLF) register.
When the DLF register is modified without preservation, it can disrupt
the baudrate settings established by firmware or bootloader, leading to
data corruption and the generation of unreadable or distorted characters.
Fixes: 701c5e73b2 ("serial: 8250_dw: add fractional divisor support")
Cc: stable <stable@kernel.org>
Signed-off-by: Ruihong Luo <colorsu1922@gmail.com>
Link: https://lore.kernel.org/stable/20230713004235.35904-1-colorsu1922%40gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230713004235.35904-1-colorsu1922@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This function is called indirectly from the platform driver probe
function. Even if the driver is built in, it may be probed after
free_initmem() due to deferral or unbinding/binding via sysfs.
Thus the function cannot be marked as __init.
Fixes: 45c054d081 ("tty: serial: add driver for the SiFive UART")
Cc: stable <stable@kernel.org>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20230624060159.3401369-1-samuel.holland@sifive.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230712062853.11007-15-frank.li@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230712062853.11007-14-frank.li@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230712062853.11007-13-frank.li@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230712062853.11007-12-frank.li@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230712062853.11007-11-frank.li@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230712062853.11007-10-frank.li@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20230712062853.11007-9-frank.li@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230712062853.11007-8-frank.li@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230712062853.11007-7-frank.li@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230712062853.11007-6-frank.li@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230712062853.11007-5-frank.li@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230712062853.11007-4-frank.li@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230712062853.11007-3-frank.li@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230712062853.11007-2-frank.li@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230712062853.11007-1-frank.li@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make the clock-rate debug printk more readable by using an equal sign
instead of a dash as separator between names and values and adding some
spaces:
qcom_geni_serial 988000.serial: desired_rate = 1843200, clk_rate = 7372800, clk_div = 4
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230714130214.14552-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The operating-performance-point vote needs to be dropped when shutting
down the port to avoid wasting power by keeping resources like power
domains in an unnecessarily high performance state (e.g. when a UART
connected Bluetooth controller is not in use).
Fixes: a5819b548a ("tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state")
Cc: stable@vger.kernel.org # 5.9
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230714130214.14552-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add IDLE interrupt support for receive dma on imx7ulp/imx8ulp/imx8qxp
platforms to replace the receive dma timer function, because the receive
dma timer has bigger latency than idle interrupt triggering, which may
cause the Bluetooth Firmware download timeout on Android platform(it
has a limited FW download time window).
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20230710013857.7396-3-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the lpuart32_int() below lpuart_copy_rx_to_tty(), this is a
preparation patch for the next patch to avoid the function declaration,
no actual functional changes.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20230710013857.7396-2-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mrvl,pxa-uart already supports earlycon and both compatible strings use
the same driver, so there's no reason for mmp-uart to not have earlycon
as well.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20230721210042.21535-2-duje.mihanovic@skole.hr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement separate uart_data to ensure proper devname value for the A1
SoC family. Use 'ttyS' devname, as required by the A1 architecture,
instead of the legacy gx architecture.
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230705181833.16137-6-ddrokosov@sberdevices.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to use the correct devname value for the S4 SoC family, it
is imperative that we implement separate uart_data. Unlike the legacy
g12a architecture, the S4 architecture should employ the use of 'ttyS'
devname.
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230705181833.16137-5-ddrokosov@sberdevices.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is worth noting that the devname ttyS is a widely recognized tty name
and is commonly used by many uart device drivers. Given the established
usage and compatibility concerns, it may not be feasible to change the
devname for older SoCs. However, for new definitions, it is acceptable
and even recommended to use a new devname to help ensure clarity and
avoid any potential conflicts on lower or upper software levels.
For more information please refer to IRC discussion at [1].
Links:
[1]: https://libera.irclog.whitequark.org/linux-amlogic/2023-07-03
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Link: https://lore.kernel.org/r/20230705181833.16137-4-ddrokosov@sberdevices.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Actually, the meson_uart module is already a platform_driver, but it is
currently registered manually and the uart core registration is run
outside the probe() scope, which results in some restrictions. For
instance, it is not possible to communicate with the OF subsystem
because it requires an initialized device object.
To address this issue, apply module_platform_driver() instead of direct
module init/exit routines. Additionally, move uart_register_driver() to
the driver probe(), and destroy manual console registration because it's
already run in the uart_register_driver() flow.
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230705181833.16137-3-ddrokosov@sberdevices.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use dev_err_probe() helper for error checking and standard logging.
It makes the driver's probe() function a little bit shorter.
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230705181833.16137-2-ddrokosov@sberdevices.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The UART ports created by this driver were not usable out of
the box, so let the configuration be handled by the 8250 UART
subsystem. This makes the implementation simpler and the UART
port more usable.
The 8250 UART subsystem will take care of requesting the memory
resources, but the driver needs to first read the register where
the num ports is set, so a request of the resource is needed
before registering the UART port.
Co-developed-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Javier Rodriguez <josejavier.rodriguez@duagon.com>
Link: https://lore.kernel.org/r/20230705131423.30552-4-josejavier.rodriguez@duagon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The IP Core Z025 and Z057 have a register where the amount of UART
ports is specified. Such register is located at offset 0x40.
This patch fixes the way the UART ports is calculated by reading
the actual register. Additionally a refactor was needed to achieve
this so we can keep track of the UART line and its offset which
also improves the remove callback.
Co-developed-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Javier Rodriguez <josejavier.rodriguez@duagon.com>
Link: https://lore.kernel.org/r/20230705131423.30552-3-josejavier.rodriguez@duagon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some F215 FPGA multifunction boards announce themselves as 215.
This leads to a misconfigured clockrate. The F215 is the same board
as G215 but with different cPCI interface so make them get the same
configuration
Co-developed-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Javier Rodriguez <josejavier.rodriguez@duagon.com>
Link: https://lore.kernel.org/r/20230705131423.30552-2-josejavier.rodriguez@duagon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the Tegra serial driver is probe before clocks are available then the
following error is seen on boot:
serial-tegra 3100000.serial: Couldn't get the clock
This has been observed on Jetson AGX Orin. Fix this by calling
dev_err_probe() instead of dev_err() to avoid printing an error on probe
deferral.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230703113759.75608-1-jonathanh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # for imx
Link: https://lore.kernel.org/r/20230724205440.767071-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the Qualcomm interconnect defines rather than magic numbers for the
icc tags also in the restore() PM callback.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230711160516.30502-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reconcile devices.txt with serial/ucc_uart.c regarding device number
assignments. ucc_uart.c supports 4 ports and uses minor devnums
46-49, so update devices.txt with that info.
Then update ucc_uart.c's reference to the location of the devices.txt
list in the kernel source tree.
Fixes: d7584ed2b9 ("[POWERPC] qe-uart: add support for Freescale QUICCEngine UART")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Timur Tabi <timur@kernel.org>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: linux-serial@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/20230724063341.28198-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The local 'flag' variable carries only TTY_NORMAL. So use that constant
directly and drop the variable.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230712081811.29004-10-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* move the declaration of flg (with the initializer) to the loop, so
there is no need to reset it to TTY_NORMAL by an 'else' branch.
* use TTY_NORMAL as initializer above, not a magic zero constant
* remove the outer 'if' from this construct:
if (S & (A | B)) {
if (S & A)
X;
if (S & B)
Y;
}
* drop unlikely() as I doubt it has any benefits here. If it does,
provide numbers.
All four make the code easier to read.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Vineet Gupta <vgupta@kernel.org>
Acked-by: Vineet Gupta <vgupta@kernel.org>
Link: https://lore.kernel.org/r/20230712081811.29004-9-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__uart_start() does not need a tty struct. It works only with
uart_state. So pass the latter directly.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230712081811.29004-8-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both the character and flag are 8-bit values. So switch from unsigned
ints to u8s. The drivers will be cleaned up in the next round.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230712081811.29004-7-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Propagate u8 from the sysrq code further up to serial's
uart_handle_sysrq_char() and friends.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230712081811.29004-6-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using switch with range cases makes the code more aligned and readable.
Expand also that 36 as explicit addition of 10 + 26 to make the source
of the constant more obvious.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230712081811.29004-5-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Propagate u8 more from the bottom to the interface, so that sysrq
callers (usually drivers) see that u8 is expected.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230712081811.29004-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The passed parameter to sysrq handlers is a key (a character). So change
the type from 'int' to 'u8'. Let it specifically be 'u8' for two
reasons:
* unsigned: unsigned values come from the upper layers (devices) and the
tty layer assumes unsigned on most places, and
* 8-bit: as that what's supposed to be one day in all the layers built
on the top of tty. (Currently, we use mostly 'unsigned char' and
somewhere still only 'char'. (But that also translates to the former
thanks to -funsigned-char.))
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Zqiang <qiang.zhang1211@gmail.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de> # DRM
Acked-by: WANG Xuerui <git@xen0n.name> # loongarch
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20230712081811.29004-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'i' is a too generic name for something which carries a 'loglevel'. Name
it as such and make it 'u8', the same as key will become in the next
patches.
Note that we are not stripping any high bits away, 'key' is given only
8bit values.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230712081811.29004-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In many n_tty functions, the 'tty' parameter is used to either obtain
'ldata', or test the tty flags. So mark 'tty' in them const to make
obvious that it is only read.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230712064216.12150-5-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'tty' is not needed in canon_skip_eof(), so we can pass 'ldata' directly
instead.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230712064216.12150-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Make 'tty' parameter const as we only look at tty flags here.
* Make 'size' parameter of size_t type as everyone passes that and
memset() (the consumer) expects size_t too. So be consistent.
* Remove redundant local variables, place the content directly to the
'if'.
* Use 0 instead of 0x00 in memset(). The former is more obvious.
No functional changes expected.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230712064216.12150-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The runtime PM state should not be changed by drivers that do not
implement runtime PM even if it happens to work around a bug in PM core.
With the wake irq arming now fixed, drop the bogus runtime PM state
update which left the device in active state (and could potentially
prevent a parent device from suspending).
Fixes: f3974413cf ("tty: serial: qcom_geni_serial: Wakeup IRQ cleanup")
Cc: 5.6+ <stable@vger.kernel.org> # 5.6+
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
83efeeeb3d ("tty: Allow TIOCSTI to be disabled") broke BRLTTY's
ability to simulate keypresses on the console, thus effectively breaking
braille keyboards of blind users.
This restores the TIOCSTI feature for CAP_SYS_ADMIN processes, which
BRLTTY is, thus fixing braille keyboards without re-opening the security
issue.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Kees Cook <keescook@chromium.org>
Fixes: 83efeeeb3d ("tty: Allow TIOCSTI to be disabled")
Cc: stable@vger.kernel.org
Reported-by: Nicolas Pitre <nico@fluxnic.net>
Link: https://lore.kernel.org/r/20230710002645.v565c7xq5iddruse@begin
Acked-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big set of tty/serial driver updates for 6.5-rc1.
Included in here are:
- tty_audit code cleanups from Jiri
- more 8250 cleanups from Ilpo
- samsung_tty driver bugfixes
- 8250 lock port updates
- usual fsl_lpuart driver updates and fixes
- other small serial driver fixes and updates, full details in the
shortlog.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZKKVTQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl+wACgwWX8fdrkBHASPVkcYOn8xa27E08AnjNz2Y8K
vvOII6EEYKwFjEkjAoIX
=By18
-----END PGP SIGNATURE-----
Merge tag 'tty-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of tty/serial driver updates for 6.5-rc1.
Included in here are:
- tty_audit code cleanups from Jiri
- more 8250 cleanups from Ilpo
- samsung_tty driver bugfixes
- 8250 lock port updates
- usual fsl_lpuart driver updates and fixes
- other small serial driver fixes and updates, full details in the
shortlog
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits)
tty_audit: make data of tty_audit_log() const
tty_audit: make tty pointers in exposed functions const
tty_audit: make icanon a bool
tty_audit: invert the condition in tty_audit_log()
tty_audit: use kzalloc() in tty_audit_buf_alloc()
tty_audit: use TASK_COMM_LEN for task comm
Revert "8250: add support for ASIX devices with a FIFO bug"
serial: atmel: don't enable IRQs prematurely
tty: serial: Add Nuvoton ma35d1 serial driver support
tty: serial: fsl_lpuart: add earlycon for imx8ulp platform
tty: serial: imx: fix rs485 rx after tx
selftests: tty: add selftest for tty timestamp updates
tty: tty_io: update timestamps on all device nodes
tty: fix hang on tty device with no_room set
serial: core: fix -EPROBE_DEFER handling in init
serial: 8250_omap: Use force_suspend and resume for system suspend
tty: serial: samsung_tty: Use abs() to simplify some code
tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when iterating clk
tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() in case of error
serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLE
...
Here are a small set of changes for 6.5-rc1 for some driver core
changes. Included in here are:
- device property cleanups to make it easier to write "agnostic"
drivers when regards to the firmware layer underneath them (DT vs.
ACPI)
- debugfs documentation updates
- devres additions
- sysfs documentation and changes to handle empty directory creation
logic better
- tiny kernfs optimizations
- other tiny changes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZKKSEQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoowCfT+Joha+cz4edAFUvd55lKPPJJFsAoNiprHmX
di37sirvn6vo54Hk0Nyq
=qqTo
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are a small set of changes for 6.5-rc1 for some driver core
changes. Included in here are:
- device property cleanups to make it easier to write "agnostic"
drivers when regards to the firmware layer underneath them (DT vs.
ACPI)
- debugfs documentation updates
- devres additions
- sysfs documentation and changes to handle empty directory creation
logic better
- tiny kernfs optimizations
- other tiny changes
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
sysfs: Skip empty folders creation
sysfs: Improve readability by following the kernel coding style
drivers: fwnode: fix fwnode_irq_get[_byname]()
ata: ahci_platform: Make code agnostic to OF/ACPI
device property: Implement device_is_compatible()
ACPI: Move ACPI_DEVICE_CLASS() to mod_devicetable.h
base/node: Use 'property' to identify an access parameter
driver core: device.h: add some missing kerneldocs
kernfs: fix missing kernfs_idr_lock to remove an ID from the IDR
isa: Remove unnecessary checks
MAINTAINERS: add entry for auxiliary bus
debugfs: Correct the 'debugfs_create_str' docs
serial: qcom_geni: Comment use of devm_krealloc rather than devm_krealloc_array
iio: adc: Use devm_krealloc_array
hwmon: pmbus: Use devm_krealloc_array
brings some order to the documentation directory, declutters the top-level
directory, and makes the documentation organization more closely match that
of the source.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmSbDRwPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y0b0H/A69Yxns1Bf465rNNINREaWWzJzIPGyJax9F
7x2zYphL2BLmDysHDvBpP858ytA4qzmqS7TopI1zjqTS6Uh4qTfsQTWNfk536Oyi
XOkKONPAqzuk4Pvsam4t46lMb5xqkyy7FcsZSp25ona7t8nLiTkoxTWIabvFziFN
F7qJ/u/Uzck53FgR2Xtss4vrkcWDTgva5SzQUhoxGfEqjEOoQi7CfqLQC468wfOt
/XlBCnTRPnZ6bFiD/9QHU+D0setWVBs0IJHH2ogDlx/FHOvp83haJHVRFNYpx0Gd
UY72gEbovzYauKMaa6azBo+1Tje6tTu6wfV3ZAG8UJYe/vJkdUw=
=EBMZ
-----END PGP SIGNATURE-----
Merge tag 'docs-arm-move' of git://git.lwn.net/linux
Pull arm documentation move from Jonathan Corbet:
"Move the Arm architecture documentation under Documentation/arch/.
This brings some order to the documentation directory, declutters the
top-level directory, and makes the documentation organization more
closely match that of the source"
* tag 'docs-arm-move' of git://git.lwn.net/linux:
dt-bindings: Update Documentation/arm references
docs: update some straggling Documentation/arm references
crypto: update some Arm documentation references
mips: update a reference to a moved Arm Document
arm64: Update Documentation/arm references
arm: update in-source documentation references
arm: docs: Move Arm documentation to Documentation/arch/
-----BEGIN PGP SIGNATURE-----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=KhW4
-----END PGP SIGNATURE-----
Merge tag 'for-6.5/splice-2023-06-23' of git://git.kernel.dk/linux
Pull splice updates from Jens Axboe:
"This kills off ITER_PIPE to avoid a race between truncate,
iov_iter_revert() on the pipe and an as-yet incomplete DMA to a bio
with unpinned/unref'ed pages from an O_DIRECT splice read. This causes
memory corruption.
Instead, we either use (a) filemap_splice_read(), which invokes the
buffered file reading code and splices from the pagecache into the
pipe; (b) copy_splice_read(), which bulk-allocates a buffer, reads
into it and then pushes the filled pages into the pipe; or (c) handle
it in filesystem-specific code.
Summary:
- Rename direct_splice_read() to copy_splice_read()
- Simplify the calculations for the number of pages to be reclaimed
in copy_splice_read()
- Turn do_splice_to() into a helper, vfs_splice_read(), so that it
can be used by overlayfs and coda to perform the checks on the
lower fs
- Make vfs_splice_read() jump to copy_splice_read() to handle
direct-I/O and DAX
- Provide shmem with its own splice_read to handle non-existent pages
in the pagecache. We don't want a ->read_folio() as we don't want
to populate holes, but filemap_get_pages() requires it
- Provide overlayfs with its own splice_read to call down to a lower
layer as overlayfs doesn't provide ->read_folio()
- Provide coda with its own splice_read to call down to a lower layer
as coda doesn't provide ->read_folio()
- Direct ->splice_read to copy_splice_read() in tty, procfs, kernfs
and random files as they just copy to the output buffer and don't
splice pages
- Provide wrappers for afs, ceph, ecryptfs, ext4, f2fs, nfs, ntfs3,
ocfs2, orangefs, xfs and zonefs to do locking and/or revalidation
- Make cifs use filemap_splice_read()
- Replace pointers to generic_file_splice_read() with pointers to
filemap_splice_read() as DIO and DAX are handled in the caller;
filesystems can still provide their own alternate ->splice_read()
op
- Remove generic_file_splice_read()
- Remove ITER_PIPE and its paraphernalia as generic_file_splice_read
was the only user"
* tag 'for-6.5/splice-2023-06-23' of git://git.kernel.dk/linux: (31 commits)
splice: kdoc for filemap_splice_read() and copy_splice_read()
iov_iter: Kill ITER_PIPE
splice: Remove generic_file_splice_read()
splice: Use filemap_splice_read() instead of generic_file_splice_read()
cifs: Use filemap_splice_read()
trace: Convert trace/seq to use copy_splice_read()
zonefs: Provide a splice-read wrapper
xfs: Provide a splice-read wrapper
orangefs: Provide a splice-read wrapper
ocfs2: Provide a splice-read wrapper
ntfs3: Provide a splice-read wrapper
nfs: Provide a splice-read wrapper
f2fs: Provide a splice-read wrapper
ext4: Provide a splice-read wrapper
ecryptfs: Provide a splice-read wrapper
ceph: Provide a splice-read wrapper
afs: Provide a splice-read wrapper
9p: Add splice_read wrapper
net: Make sock_splice_read() use copy_splice_read() by default
tty, proc, kernfs, random: Use copy_splice_read()
...
'data' are only read (passed down to audit_log_n_hex()), so they can be
const -- the same what is expected in audit_log_n_hex(). Only a minor
cleanup to be consistent.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230621101611.10580-7-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both tty_audit_add_data() and tty_audit_tiocsti() need only to read from
the tty struct, so make the tty parameters of them both const. This
aids the compiler a bit.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230621101611.10580-6-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use bool for tty_audit_buf::icanon in favor of ugly bitfields. And get
rid of "!!" as that is completely unnecessary.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230621101611.10580-5-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we cannot obtain an audit buffer in tty_audit_log(), simply return
from the function. Apart this is mostly preferred in the kernel, it
allows to merge the split audit string while still keeping it readable.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230621101611.10580-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty_audit_buf_alloc() manually erases most of the entries after
kmalloc(). So use kzalloc() and remove the manual sets to zero.
That way, we are sure that we do not omit anything.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230621101611.10580-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit eb26dfe8aa.
Commit eb26dfe8aa ("8250: add support for ASIX devices with a FIFO
bug") merged on Jul 13, 2012 adds a quirk for PCI_VENDOR_ID_ASIX
(0x9710). But that ID is the same as PCI_VENDOR_ID_NETMOS defined in
1f8b061050c7 ("[PATCH] Netmos parallel/serial/combo support") merged
on Mar 28, 2005. In pci_serial_quirks array, the NetMos entry always
takes precedence over the ASIX entry even since it was initially
merged, code in that commit is always unreachable.
In my tests, adding the FIFO workaround to pci_netmos_init() makes no
difference, and the vendor driver also does not have such workaround.
Given that the code was never used for over a decade, it's safe to
revert it.
Also, the real PCI_VENDOR_ID_ASIX should be 0x125b, which is used on
their newer AX99100 PCIe serial controllers released on 2016. The FIFO
workaround should not be intended for these newer controllers, and it
was never implemented in vendor driver.
Fixes: eb26dfe8aa ("8250: add support for ASIX devices with a FIFO bug")
Cc: stable <stable@kernel.org>
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230619155743.827859-1-jiaqing.zhao@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The atmel_complete_tx_dma() function disables IRQs at the start
of the function by calling spin_lock_irqsave(&port->lock, flags);
There is no need to disable them a second time using the
spin_lock_irq() function and, in fact, doing so is a bug because
it will enable IRQs prematurely when we call spin_unlock_irq().
Just use spin_lock/unlock() instead without disabling or enabling
IRQs.
Fixes: 08f738be88 ("serial: at91: add tx dma support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Link: https://lore.kernel.org/r/cb7c39a9-c004-4673-92e1-be4e34b85368@moroto.mountain
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds UART and console driver for Nuvoton ma35d1 Soc.
It supports full-duplex communication, FIFO control, and
hardware flow control.
Command line set "console=ttyNVT0,115200", NVT means
Nuvoton MA35 UART port. The UART driver probe will
create path named "/dev/ttyNVTx".
Signed-off-by: Jacky Huang <ychuang3@nuvoton.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230619032330.233796-2-ychuang570808@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 79d0224f6b ("tty: serial: imx: Handle RS485 DE signal
active high") RS485 reception no longer works after a transmission.
The following scenario shows the problem:
1) Open a port in RS485 mode
2) Receive data from remote (OK)
3) Transmit data to remote (OK)
4) Receive data from remote (Nothing received)
In RS485 mode, imx_uart_start_tx() calls imx_uart_stop_rx() and, when the
transmission is complete, imx_uart_stop_tx() calls imx_uart_start_rx().
Since the above commit imx_uart_stop_rx() now sets the loopback bit but
imx_uart_start_rx() does not clear it causing the hardware to remain in
loopback mode and not receive external data.
Fix this by moving the existing loopback disable code to a helper function
and calling it from imx_uart_start_rx() too.
Fixes: 79d0224f6b ("tty: serial: imx: Handle RS485 DE signal active high")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230616104838.2729694-1-martin.fuzzey@flowbird.group
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Arm documentation has moved to Documentation/arch/arm; update the
last remaining references to match.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # for pwm
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
User space applications watch for timestamp changes on character device
files in order to determine idle time of a given terminal session. For
example, "w" program uses this information to populate the IDLE column
of its output [1]. Similarly, systemd-logind has optional feature where
it uses atime of the tty character device to determine if there was
activity on the terminal associated with the logind's session object. If
there was no activity for a configured period of time then logind will
terminate such session [2].
Now, usually (e.g. bash running on the terminal) the use of the terminal
will update timestamps (atime and mtime) on the corresponding terminal
character device. However, if access to the terminal, e.g. /dev/pts/0,
is performed through magic character device /dev/tty then such access
obviously changes the state of the terminal, however timestamps on the
device that correspond to the terminal (/dev/pts/0) are not updated.
This patch makes sure that we update timestamps on *all* character
devices that correspond to the given tty, because outside observers (w,
systemd-logind) are maybe checking these timestamps. Obviously, they can
not check timestamps on /dev/tty as that has per-process meaning.
[1] https://gitlab.com/procps-ng/procps/-/blob/v4.0.0/w.c#L286
[2] https://github.com/systemd/systemd/blob/v252/NEWS#L477
Signed-off-by: Michal Sekletar <msekleta@redhat.com>
Message-ID: <20230613172107.78138-1-msekleta@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is possible to hang pty devices in this case, the reader was
blocking at epoll on master side, the writer was sleeping at
wait_woken inside n_tty_write on slave side, and the write buffer
on tty_port was full, we found that the reader and writer would
never be woken again and blocked forever.
The problem was caused by a race between reader and kworker:
n_tty_read(reader): n_tty_receive_buf_common(kworker):
copy_from_read_buf()|
|room = N_TTY_BUF_SIZE - (ldata->read_head - tail)
|room <= 0
n_tty_kick_worker() |
|ldata->no_room = true
After writing to slave device, writer wakes up kworker to flush
data on tty_port to reader, and the kworker finds that reader
has no room to store data so room <= 0 is met. At this moment,
reader consumes all the data on reader buffer and calls
n_tty_kick_worker to check ldata->no_room which is false and
reader quits reading. Then kworker sets ldata->no_room=true
and quits too.
If write buffer is not full, writer will wake kworker to flush data
again after following writes, but if write buffer is full and writer
goes to sleep, kworker will never be woken again and tty device is
blocked.
This problem can be solved with a check for read buffer size inside
n_tty_receive_buf_common, if read buffer is empty and ldata->no_room
is true, a call to n_tty_kick_worker is necessary to keep flushing
data to reader.
Cc: <stable@vger.kernel.org>
Fixes: 42458f41d0 ("n_tty: Ensure reader restarts worker for next reader")
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Hui Li <caelli@tencent.com>
Message-ID: <1680749090-14106-1-git-send-email-caelli@tencent.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The -EPROBE_DEFER error path in serial_base_device_init() is a bit
awkward. Before the call to device_initialize(dev) then we need to
manually release all the device resources. And after the call then we
need to call put_device() to release the resources. Doing either one
wrong will result in a leak or a use after free.
So let's wait to return -EPROBE_DEFER until after the call to
device_initialize(dev) so that way callers do not have to handle
-EPROBE_DEFER as a special case. Now callers can just use put_device()
for clean up.
The second issue with the -EPROBE_DEFER path is that deferring is not
supposed to be a fatal error, but instead it's normal part of the
init process and the kernel recovers from it automatically. That means
we should not print an error message but just a debug message on this
path.
Fixes: 539914240a ("serial: core: Fix probing serial_base_bus devices")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Message-ID: <18318adb-ab2c-4dcc-9f96-498a13d16b80@moroto.mountain>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should not rely on autosuspend timeout for system suspend. Instead,
let's use force_suspend and force_resume functions. Otherwise the serial
port controller device may not be idled on suspend.
As we are doing a register write on suspend to configure the serial port,
we still need to runtime PM resume the port on suspend.
While at it, let's switch to pm_runtime_resume_and_get() and check for
errors returned. And let's add the missing line break before return to the
suspend function while at it.
Fixes: 09d8b2bdbc ("serial: 8250: omap: Provide ability to enable/disable UART as wakeup source")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Message-ID: <20230614045922.4798-1-tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the best clk is searched, we iterate over all possible clk.
If we find a better match, the previous one, if any, needs to be freed.
If a better match has already been found, we still need to free the new
one, otherwise it leaks.
Cc: <stable@vger.kernel.org> # v3.3+
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Fixes: 5f5a7a5578 ("serial: samsung: switch to clkdev based clock lookup")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Message-ID: <cf3e0053d2fc7391b2d906a86cd01a5ef15fb9dc.1686412569.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If clk_get_rate() fails, the clk that has just been allocated needs to be
freed.
Cc: <stable@vger.kernel.org> # v3.3+
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Fixes: 5f5a7a5578 ("serial: samsung: switch to clkdev based clock lookup")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Message-ID: <e4baf6039368f52e5a5453982ddcb9a330fc689e.1686412569.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LS1028A is using DMA with LPUART. Having RX watermark set to 1, means
DMA transactions are started only after receiving the second character.
On other platforms with newer LPUART IP, Receiver Idle Empty function
initiates the DMA request after the receiver is idling for 4 characters.
But this feature is missing on LS1028A, which is causing a 1-character
delay in the RX direction on this platform.
Set RX watermark to 0 to initiate RX DMA after each character.
Link: https://lore.kernel.org/linux-serial/20230607103459.1222426-1-robert.hodaszi@digi.com/
Fixes: 9ad9df8447 ("tty: serial: fsl_lpuart: Fix the wrong RXWATER setting for rx dma case")
Cc: stable <stable@kernel.org>
Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com>
Message-ID: <20230609121334.1878626-1-robert.hodaszi@digi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The need to handle the FSL variant of 8250 in a special way is also
present without console support. So soften the dependency for
SERIAL_8250_FSL from SERIAL_8250_CONSOLE to SERIAL_8250. To handle
SERIAL_8250=m, the FSL code can be modular, too, thus SERIAL_8250_FSL
becomes tristate.
Compiling 8250_fsl as a module requires adding a module license so this
is added, too. While add it also add a appropriate module description.
As then SERIAL_OF_PLATFORM=y + SERIAL_8250_FSL=m is a valid combination
(if COMPILE_TEST is enabled on a platform that is neither PPC, ARM nor
ARM64), the check in 8250_of.c must be weakened a bit.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-ID: <20230609133932.786117-3-u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The put_device() function will call serial_base_ctrl_release() or
serial_base_port_release() so these kfrees() are a double free bug.
Fixes: 84a9582fd2 ("serial: core: Start managing serial controllers to enable runtime PM")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Message-ID: <ZH7tsTmWY5b/4m+6@moroto>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the error interrupt is never acknowledged, so once active it
will stay active indefinitely, causing the handler to be called in an
infinite loop.
Fixes: 2f0fc4159a ("SERIAL: Lantiq: Add driver for MIPS Lantiq SOCs.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Bernhard Seibold <mail@bernhard-seibold.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Message-ID: <20230602133029.546-1-mail@bernhard-seibold.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 8250_mtk driver's runtime PM support has some issues:
- The bus clock is enabled (through runtime PM callback) later than a
register write
- runtime PM resume callback directly called in probe, but no
pm_runtime_set_active() call is present
- UART PM function calls the callbacks directly, _and_ calls runtime
PM API
- runtime PM callbacks try to do reference counting, adding yet another
count between runtime PM and clocks
This fragile setup worked in a way, but broke recently with runtime PM
support added to the serial core. The system would hang when the UART
console was probed and brought up.
Tony provided some potential fixes [1][2], though they were still a bit
complicated. The 8250_dw driver, which the 8250_mtk driver might have
been based on, has a similar structure but simpler runtime PM usage.
Simplify clock sequencing and runtime PM support in the 8250_mtk driver.
Specifically, the clock is acquired enabled and assumed to be active,
unless toggled through runtime PM suspend/resume. Reference counting is
removed and left to the runtime PM core. The serial pm function now
only calls the runtime PM API.
[1] https://lore.kernel.org/linux-serial/20230602092701.GP14287@atomide.com/
[2] https://lore.kernel.org/linux-serial/20230605061511.GW14287@atomide.com/
Fixes: 84a9582fd2 ("serial: core: Start managing serial controllers to enable runtime PM")
Suggested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Message-ID: <20230606091747.2031168-1-wenst@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes the property name read in the driver according to the YAML.
According to device-tree documentation, property names should not
include underscores.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Message-ID: <20230604083558.16661-1-rgallaispou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
