[ Upstream commit 471e45a333 ]
pm_runtime_put() may return an error code. Check its return status.
Along with it the rzg2l_wdt_set_timeout() function was updated to
propagate the result of rzg2l_wdt_stop() to its caller.
Fixes: 2cbc5cd0b5 ("watchdog: Add Watchdog Timer driver for RZ/G2L")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240531065723.1085423-5-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0ba0fcdd1 ]
pm_runtime_get_sync() may return with error. In case it returns with error
dev->power.usage_count needs to be decremented. pm_runtime_resume_and_get()
takes care of this. Thus use it.
Along with it the rzg2l_wdt_set_timeout() function was updated to
propagate the result of rzg2l_wdt_start() to its caller.
Fixes: 2cbc5cd0b5 ("watchdog: Add Watchdog Timer driver for RZ/G2L")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240531065723.1085423-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
-----BEGIN PGP SIGNATURE-----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=zdH0
-----END PGP SIGNATURE-----
Merge tag 'v6.6.34' into lf-6.6.y
This is the 6.6.34 stable release
* tag 'v6.6.34': (2530 commits)
Linux 6.6.34
smp: Provide 'setup_max_cpus' definition on UP too
selftests: net: more strict check in net_helper
...
Signed-off-by: Jason Liu <jason.hui.liu@nxp.com>
Conflicts:
arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
drivers/net/ethernet/freescale/fec_ptp.c
drivers/pmdomain/imx/imx8mp-blk-ctrl.c
drivers/usb/dwc3/host.c
tools/perf/util/pmu.c
commit cae5851653 upstream.
On AM62x, the watchdog is pet before the valid window is open. Fix
min_hw_heartbeat and accommodate a 2% + static offset safety margin.
The static offset accounts for max hardware error.
Remove the hack in the driver which shifts the open window boundary,
since it is no longer necessary due to the fix mentioned above.
cc: stable@vger.kernel.org
Fixes: 5527483f8f ("watchdog: rti-wdt: attach to running watchdog during probe")
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240417205700.3947408-1-jm@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e3b3afd34d ]
The always-running (from linux,wdt-gpio.yaml) is abused by the BD9576
watchdog driver. It's defined meaning is "the watchdog is always running
and can not be stopped". The BD9576 watchdog driver has implemented it
as "start watchdog when loading the module and prevent it from being
stopped".
Furthermore, the implementation does not set the WDOG_HW_RUNNING when
enabling the watchdog due to the "always-running" at module loading.
This will end up resulting a watchdog timeout if the device is not
opened.
The culprit was pointed out by Guenter, discussion can be found from
https://lore.kernel.org/lkml/4fa3a64b-60fb-4e5e-8785-0f14da37eea2@roeck-us.net/
Drop the invalid "always-running" handling.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: b237bcac55 ("wdt: Support wdt on ROHM BD9576MUF and BD9573MUF")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/ZhPAt76yaJMersXf@fedora
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5736015212 ]
When the cpu5wdt module is removing, the origin code uses del_timer() to
de-activate the timer. If the timer handler is running, del_timer() could
not stop it and will return directly. If the port region is released by
release_region() and then the timer handler cpu5wdt_trigger() calls outb()
to write into the region that is released, the use-after-free bug will
happen.
Change del_timer() to timer_shutdown_sync() in order that the timer handler
could be finished before the port region is released.
Fixes: e09d9c3e9f ("watchdog: cpu5wdt.c: add missing del_timer call")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240324140444.119584-1-duoming@zju.edu.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dbd7c0088b ]
The driver never sets a default timeout value, therefore it is
initialized to zero. When CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is
enabled, the watchdog is started during probe. The kernel is supposed to
automatically ping the watchdog from this point until userspace takes
over, but this does not happen if the configured timeout is zero. A zero
timeout causes watchdog_need_worker() to return false, so the heartbeat
worker does not run and the system therefore resets soon after the
driver is probed.
This patch fixes this by setting an arbitrary non-zero default timeout.
The default could be read from the hardware instead, but I didn't see
any reason to add this complexity.
This has been tested on an STM32F746.
Fixes: 85fdc63fe2 ("drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240228182723.12855-1-ben.wolsieffer@hefring.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d12971849d ]
WDTCTRL bit 3 sets the mode choice for the clock input of IT8784/IT8786.
Some motherboards require this bit to be set to 1 (= PCICLK mode),
otherwise the watchdog functionality gets broken. The BIOS of those
motherboards sets WDTCTRL bit 3 already to 1.
Instead of setting all bits of WDTCTRL to 0 by writing 0x00 to it, keep
bit 3 of it unchanged for IT8784/IT8786 chips. In this way, bit 3 keeps
the status as set by the BIOS of the motherboard.
Watchdog tests have been successful with this patch with the following
systems:
IT8784: Thomas-Krenn LES plus v2 (YANLING YL-KBRL2 V2)
IT8786: Thomas-Krenn LES plus v3 (YANLING YL-CLU L2)
IT8786: Thomas-Krenn LES network 6L v2 (YANLING YL-CLU6L)
Link: https://lore.kernel.org/all/140b264d-341f-465b-8715-dacfe84b3f71@roeck-us.net/
Signed-off-by: Werner Fischer <devlists@wefi.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231213094525.11849-4-devlists@wefi.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f779998872 ]
Add the necessary __acquires() and __releases() to the functions
that take and release the wdt lock to avoid the following sparse
warnings:
drivers/watchdog/starfive-wdt.c:204:13: warning: context imbalance in 'starfive_wdt_unlock' - wrong count at exit
drivers/watchdog/starfive-wdt.c:212:9: warning: context imbalance in 'starfive_wdt_lock' - unexpected unlock
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231122085118.177589-1-ben.dooks@codethink.co.uk
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1a6edf3b5 ]
Call runtime_pm_put*() if watchdog is not already started during probe and re
enable it in watchdog start as required.
On K3 SoCs, watchdogs and their corresponding CPUs are under same
power-domain, so if the reference count of unused watchdogs aren't
dropped, it will lead to CPU hotplug failures as Device Management
firmware won't allow to turn off the power-domain due to dangling
reference count.
Fixes: 2d63908bdb ("watchdog: Add K3 RTI watchdog support")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Tested-by: Manorit Chawdhry <m-chawdhry@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231213140110.938129-1-vigneshr@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f33f5b1fd1 ]
Users report about the unexpected behavior for setting timeouts above
15 sec on Raspberry Pi. According to watchdog-api.rst the ioctl
WDIOC_SETTIMEOUT shouldn't fail because of hardware limitations.
But looking at the code shows that max_timeout based on the
register value PM_WDOG_TIME_SET, which is the maximum.
Since 664a39236e ("watchdog: Introduce hardware maximum heartbeat
in watchdog core") the watchdog core is able to handle this problem.
This fix has been tested with watchdog-test from selftests.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217374
Fixes: 664a39236e ("watchdog: Introduce hardware maximum heartbeat in watchdog core")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231112173251.4827-1-wahrenst@gmx.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dced0b3e51 ]
Avoid unnecessary crashes by claiming only NMIs that are due to
ERROR signalling or generated by the hpwdt hardware device.
The code does this, but only for iLO5.
The intent was to preserve legacy, Gen9 and earlier, semantics of
using hpwdt for error containtment as hardware/firmware would signal
fatal IO errors as an NMI with the expectation of hpwdt crashing
the system. Howerver, these IO errors should be received by hpwdt
as an NMI_IO_CHECK. So the test is overly permissive and should
not be limited to only ilo5.
We need to enable this protection for future iLOs not matching the
current PCI IDs.
Fixes: 62290a5c19 ("watchdog: hpwdt: Claim NMIs generated by iLO5")
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231213215340.495734-2-jerry.hoemann@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38d7529774 ]
When the new watchdog character device is registered, it becomes
available for opening. This creates a race where userspace may open the
device before the character device's owner is set. This results in an
imbalance in module_get calls as the cdev_get in cdev_open will not
increment the reference count on the watchdog driver module.
This causes problems when the watchdog character device is released as
the module loader's reference will also be released. This makes it
impossible to open the watchdog device later on as it now appears that
the module is being unloaded. The open will fail with -ENXIO from
chrdev_open.
The legacy watchdog device will fail with -EBUSY from the try_module_get
in watchdog_open because it's module owner is the watchdog core module
so it can still be opened but it will fail to get a refcount on the
underlying watchdog device driver.
Fixes: 72139dfa24 ("watchdog: Fix the race between the release of watchdog_core_data and cdev")
Signed-off-by: Curtis Klein <curtis.klein@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231205190522.55153-1-curtis.klein@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This is the 6.6.3 stable release
* tag 'v6.6.3': (526 commits)
Linux 6.6.3
drm/amd/display: Change the DMCUB mailbox memory location from FB to inbox
drm/amd/display: Clear dpcd_sink_ext_caps if not set
...
Signed-off-by: Jason Liu <jason.hui.liu@nxp.com>
Conflicts:
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
drivers/usb/dwc3/core.c
This is the 6.6.2 stable release
* tag 'v6.6.2': (634 commits)
Linux 6.6.2
btrfs: make found_logical_ret parameter mandatory for function queue_scrub_stripe()
btrfs: use u64 for buffer sizes in the tree search ioctls
...
Signed-off-by: Jason Liu <jason.hui.liu@nxp.com>
Conflicts:
drivers/clk/imx/clk-imx8mq.c
drivers/clk/imx/clk-imx8qxp.c
drivers/media/i2c/ov5640.c
drivers/misc/pci_endpoint_test.c
commit 5d6aa89bba upstream.
Commit abd3ac7902 ("watchdog: sbsa: Support architecture version 1")
introduced new timer math for watchdog revision 1 with the 48 bit offset
register.
The gwdt->clk and timeout are u32, but the argument being calculated is
u64. Without a cast, the compiler performs u32 operations, truncating
intermediate steps, resulting in incorrect values.
A watchdog revision 1 implementation with a gwdt->clk of 1GHz and a
timeout of 600s writes 3647256576 to the one shot watchdog instead of
300000000000, resulting in the watchdog firing in 3.6s instead of 600s.
Force u64 math by casting the first argument (gwdt->clk) as a u64. Make
the order of operations explicit with parenthesis.
Fixes: abd3ac7902 ("watchdog: sbsa: Support architecture version 1")
Reported-by: Vanshidhar Konda <vanshikonda@os.amperecomputing.com>
Signed-off-by: Darren Hart <darren@os.amperecomputing.com>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-watchdog@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: <stable@vger.kernel.org> # 5.14.x
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/7d1713c5ffab19b0f3de796d82df19e8b1f340de.1695286124.git.darren@os.amperecomputing.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b4075ecfe3 ]
The IXP4xx watchdog in early "A0" silicon is unreliable and
cannot be registered, however for some systems such as the
USRobotics USR8200 the watchdog is the only restart option,
so implement a "dummy" watchdog that can only support restart
in this case.
Fixes: 1aea522809 ("watchdog: ixp4xx: Implement restart")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230926-ixp4xx-wdt-restart-v2-1-15cf4639b423@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
The wdog INT_EN bit in CS register should be set to '1' to trigger
WDOG_ANY external reset on i.MX93.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
if the wdog is already enabled, and try to enabled it again,
we should ignore the error and continue, rather than return
error.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
It is unnecessary for i.MX93 watchdog to wait 2.5 clocks after RCS is
done so that set post_rcs_wait to false when the compatible of watchdog
device node is "fsl,imx93-wdt".
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAmT3b+IACgkQ+iyteGJfRsr0hwCgkfCpOknevjztFcumniR1pREF
/z0AoIrUiPIkeDuyHwZYmILzS0jqHmU5
=OQC4
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-6.6-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add marvell GTI watchdog driver
- add support for Amlogic-T7 SoCs
- document the IPQ5018 watchdog compatible
- enable COMPILE_TEST for more watchdog device drivers
- core: stop watchdog when executing poweroff command
- other small improvements and fixes
* tag 'linux-watchdog-6.6-rc1' of git://www.linux-watchdog.org/linux-watchdog: (21 commits)
watchdog: Add support for Amlogic-T7 SoCs
watchdog: Add a new struct for Amlogic-GXBB driver
dt-bindings: watchdog: Add support for Amlogic-T7 SoCs
dt-bindings: watchdog: qcom-wdt: document IPQ5018
watchdog: imx2_wdt: Improve dev_crit() message
watchdog: stm32: Drop unnecessary of_match_ptr()
watchdog: sama5d4: readout initial state
watchdog: intel-mid_wdt: add MODULE_ALIAS() to allow auto-load
watchdog: core: stop watchdog when executing poweroff command
watchdog: pm8916_wdt: Remove redundant of_match_ptr()
watchdog: xilinx_wwdt: Use div_u64() in xilinx_wwdt_start()
watchdog: starfive: Remove #ifdef guards for PM related functions
watchdog: s3c2410: Fix potential deadlock on &wdt->lock
watchdog:rit_wdt: Add support for WDIOF_CARDRESET
dt-bindings: watchdog: ti,rti-wdt: Add support for WDIOF_CARDRESET
watchdog: Enable COMPILE_TEST for more drivers
watchdog: advantech_ec_wdt: fix Kconfig dependencies
watchdog: Explicitly include correct DT includes
Watchdog: Add marvell GTI watchdog driver
dt-bindings: watchdog: marvell GTI system watchdog driver
...
Compared with the previous Amlogic-GXBB, the watchdog of Amlogic-T7
has a different reset enable bit.
Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com>
Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230802033222.4024946-4-huqiang.qin@amlogic.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
After issuing a "poweroff" command the board goes through the
expected power-off sequence and turns it off completely:
systemd-shutdown[1]: Powering off.
imx2-wdt 30280000.watchdog: Device shutdown: Expect reboot!
reboot: Power down
The "Expect reboot!" message is misleading because in the
power-off case, no reboot is expected to happen at all.
Avoid the confusion by removing the "Expect reboot!" message.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230822135255.1013981-1-festevam@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
With COMPILE_TEST recently enabled, 0-day reports a warning:
drivers/watchdog/stm32_iwdg.c:215:34: warning: 'stm32_iwdg_of_match' defined but not used [-Wunused-const-variable=]
As STM32 platforms are always used with DT, drop the of_match_ptr().
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308211837.4VBSUAtZ-lkp@intel.com/
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230823151059.2356881-1-robh@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
While it's pretty much theoretical to be otherwise, make sure
that P2SB is selected only for X86. This is idiomatic dependency
which is used by all others who select it. Use it for Simatic
as well.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230822141859.2139630-1-andriy.shevchenko@linux.intel.com
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Readout the AT91_WDT_MR bit at probe so that it becomes possible to get the
pre-userspace handler working.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230819084726.11037-1-othacehe@gnu.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
When built with CONFIG_INTEL_MID_WATCHDOG=m, currently the driver
needs to be loaded manually, for the lack of module alias.
This causes unintended resets in cases where watchdog timer is
set-up by bootloader and the driver is not explicitly loaded.
Add MODULE_ALIAS() to load the driver automatically at boot and
avoid this issue.
Fixes: 87a1ef8058 ("watchdog: add Intel MID watchdog driver support")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230811120220.31578-1-raag.jadav@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
On some platforms, for example, Intel SoC FPGA platform, the watchdog
is started in u-boot, and so kernel will create a timer and work to
keep watchdog alive. But when user executes commands "poweroff" or
"shutdown -h", the system is reset when watchdog triggers timeout even
if WDOG_STOP_ON_REBOOT is set in watchdog driver. The root cause is
that the watchdog is not stopped properly because the SYS_POWER_OFF case
is not supported in notify callback function. So, add this case to stop
watchdog when executing poweroff command.
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230814090616.1853263-1-Meng.Li@windriver.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The driver depends on CONFIG_OF, it is not necessary to use
of_match_ptr() here.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230811062707.2301583-1-ruanjinjie@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
After commit f1a43aadb5 ("watchdog: Enable COMPILE_TEST for more
drivers"), it is possible to enable this driver on 32-bit architectures.
When building for those architectures with clang, there is an error due
to a 64-bit division in xilinx_wwdt_start():
ERROR: modpost: "__aeabi_uldivmod" [drivers/watchdog/xilinx_wwdt.ko] undefined!
Use div_u64() to fix this, which takes a 64-bit dividend and 32-bit
divisor. GCC likely avoids the same error due to optimizations it
employs to transform division by a constant into other equivalent
operations, which may be different than what is implemented in clang.
Link: https://github.com/ClangBuiltLinux/linux/issues/1915
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230815-watchdog-xilinx-div_u64-v1-1-20b0b5a65c2e@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Use the new PM macros for the suspend and resume functions to be
automatically dropped by the compiler when CONFIG_PM or
CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230706082928.10869-1-paul@crapouillou.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
As &wdt->lock is acquired by hard irq s3c2410wdt_irq(),
other acquisition of the same lock under process context should
disable irq, otherwise deadlock could happen if the
irq preempt the execution while the lock is held in process context
on the same CPU.
[Deadlock Scenario]
s3c2410wdt_suspend()
-> s3c2410wdt_stop()
-> spin_lock(&wdt->lock)
<irq iterrupt>
-> s3c2410wdt_irq()
-> s3c2410wdt_keepalive()
-> spin_lock(&wdt->lock) (deadlock here)
[Deadlock Scenario]
s3c2410wdt_probe()
-> s3c2410wdt_start()
-> spin_lock(&wdt->lock)
<irq iterrupt>
-> s3c2410wdt_irq()
-> s3c2410wdt_keepalive()
-> spin_lock(&wdt->lock) (deadlock here)
[Deadlock Scenario]
s3c2410wdt_keepalive()
-> spin_lock(&wdt->lock)
<irq iterrupt>
-> s3c2410wdt_irq()
-> s3c2410wdt_keepalive()
-> spin_lock(&wdt->lock) (deadlock here)
This flaw was found by an experimental static analysis tool I am
developing for irq-related deadlock, which reported the above
warning when analyzing the linux kernel 6.4-rc7 release.
The tentative patch fix the potential deadlock by spin_lock_irqsave()
under process context.
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230705090951.63762-1-dg573847474@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
This patch adds the WDIOF_CARDRESET support for the platform watchdog
whose hardware does not support this feature, to know if the board
reboot is due to a watchdog reset.
This is done via reserved memory(RAM), which indicates if specific
info saved, triggering the watchdog reset in last boot.
Signed-off-by: Li Hua Qian <huaqian.li@siemens.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230718021007.1338761-4-huaqian.li@siemens.com
[groeck: vaddr == NULL --> !vaddr]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The simatic-ipc driver no longer depends on PCI, but its watchdog portion
still needs it, otherwise P2SB runs into a build failure:
WARNING: unmet direct dependencies detected for P2SB
Depends on [n]: PCI [=n] && X86 [=y]
Selected by [m]:
- SIEMENS_SIMATIC_IPC_WDT [=m] && WATCHDOG [=y] && SIEMENS_SIMATIC_IPC [=y]
drivers/platform/x86/p2sb.c:121:3: error: call to undeclared function 'pci_bus_write_config_dword'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
pci_bus_write_config_dword(bus, devfn_p2sb, P2SBC, 0);
Add back the minimum dependendency to make it build in random
configurations again.
Fixes: b72da71ce2 ("platform/x86: simatic-ipc: drop PCI runtime depends and header")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230814073924.1066390-1-arnd@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
There's quite a few watchdog drivers which are easily enabled for
COMPILE_TEST, so let's enable them.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230728195022.1198555-1-robh@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230726233302.3812749-1-robh@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
This patch add support for Marvell GTI watchdog. Global timer
unit (GTI) support hardware watchdog timer. Software programs
watchdog timer to generate interrupt on first timeout, second
timeout is configured to be ignored and system reboots on
third timeout.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230803032523.6242-2-bbhushan2@marvell.com
[groeck: MODULE_LICENSE GPL v2 -> GPL since that is sufficient]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The module_mcb_driver() will set "THIS_MODULE" to driver.owner when
register a mcb_driver driver, so it is redundant initialization to set
driver.owner in men_z069_driver statement. Remove it for clean code.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230804100617.100251-1-lizetao1@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
If a user did choose to enable Siemens Simatic platform support they
likely want that driver to be enabled without having to flip more config
switches. So we make the watchdog driver config switch default to the
platform driver switches value.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230719153518.13073-2-henning.schild@siemens.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The IO region used for the watchdog also hold CMOS battery monitoring
information. Make the access muxed so that a hwmon driver can use the
region as well.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230706154831.19100-2-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
