[ Upstream commit e0779a0dcf41a6452ac0a169cd96863feb5787c7 ]
The undervoltage flags reported by the RTC are useful to know if the
time and date are reliable after a reboot. Although the threshold VLOW1
indicates that the thermometer has been shutdown and time compensation
is off, it doesn't mean that the temperature readout is currently
impossible.
As the system is running, the RTC voltage is now fully established and
we can read the temperature.
Fixes: 67075b63cc ("rtc: add AB-RTCMC-32.768kHz-EOZ9 RTC support")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://lore.kernel.org/r/20241122101031.68916-3-maxime.chevallier@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55727188dfa3572aecd946e58fab9e4a64f06894 ]
tm_mon describes months from 0 to 11, but the register contains BCD from
1 to 12. tm_year contains years since 1900, but the BCD contains 20XX.
Apply the offsets when converting these numbers.
Fixes: deeb4b5393 ("rtc: rzn1: Add new RTC driver")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20241113113032.27409-1-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8ba8a2bc4f60a1065f23d6a0e7cbea945a0f40d ]
If the __rtc_read_time call fails,, the struct rtc_time tm; may contain
uninitialized data, or an illegal date/time read from the RTC hardware.
When calling rtc_tm_to_ktime later, the result may be a very large value
(possibly KTIME_MAX). If there are periodic timers in rtc->timerqueue,
they will continually expire, may causing kernel softlockup.
Fixes: 6610e0893b ("RTC: Rework RTC code to use timerqueue for events")
Signed-off-by: Yongliang Gao <leonylgao@tencent.com>
Acked-by: Jingqun Li <jingqunli@tencent.com>
Link: https://lore.kernel.org/r/20241011043153.3788112-1-leonylgao@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6cd7adec0cf03f0aefc55676e71dd721cbc71a8 ]
If request_irq() fails in st_rtc_probe(), there is no need to enable
the irq, and if it succeeds, disable_irq() after request_irq() still has
a time gap in which interrupts can come.
request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when
request IRQ.
Fixes: b5b2bdfc28 ("rtc: st: Add new driver for ST's LPC RTC")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20240912033727.3013951-1-ruanjinjie@huawei.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Enable the rtc by default even no valid time
is set to make sure the rtc read time & alarm
function can work.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Add PM notifier to imx-sc RTC driver to handle interrupt during suspend.
If an RTC interrupt occurs when the suspend process has already started
and the RTC driver has not yet suspended, the driver will request for
the suspend to be aborted.
This patch attempts to narrow the window when RTC interrupt is missed
as wakeup event. It only fixes if the interrupt occurs after the
PM_SUSPEND_PREPAREevent is issued by the kernel.
Signed-off-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
Setting RTC time requires ownership of SCU's SYSTEM
resource. Add an 'readonly' option to the driver to
allow usage of the RTC even without owning the SYSTEM
resource. In that case, time setting is not allowed.
Signed-off-by: Fabrice Goucem <fabrice.goucem@nxp.com>
Signed-off-by: Nitin Garg <nitin.garg@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
(cherry picked from commit 0b8be44a93)
[ Leo: update binding changes to the new yaml file ]
Signed-off-by: Li Yang <leoyang.li@nxp.com>
RTC read time will be called immediately after RTC device register
finished, RTC rpmsg channel should be ready before registering RTC
device, so let RTC rpmsg channel probe callback to register RTC
platform driver to trigger RTC device probe.
The rpmsg driver has a limitation that receiving data should be done
ONLY after all rpmsg channels probe done, so here use late_initcall()
to make RTC the last rpmsg channel probed, this is to support data
receiving in RTC device probe phase.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Call the 64bit versions of rtc_tm time conversion.
The old API was removed since:
6487a8019b ("rtc: remove rtc_time_to_tm and rtc_tm_to_time")
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
67b06ba0 ("PM: QoS: Drop PM_QOS_CPU_DMA_LATENCY and rename related functions")
changed the pm_qos_*() APIs. Updated the IMX usage of them to the new
APIs.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
New driver:
- DFRobot SD2405AL
Drivers:
- stm32: add alarm A out and LSCO support
- sun6i: disable automatic clock input switching
- m48t59: set range
-----BEGIN PGP SIGNATURE-----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=sjE7
-----END PGP SIGNATURE-----
Merge tag 'rtc-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"More conversions of DT bindings to yaml. There is one new driver, for
the DFRobot SD2405AL and support for important features of the stm32
RTC. Summary:
New driver:
- DFRobot SD2405AL
Drivers:
- stm32: add alarm A out and LSCO support
- sun6i: disable automatic clock input switching
- m48t59: set range"
* tag 'rtc-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: rc5t619: use proper module tables
rtc: m48t59: set range
dt-bindings: rtc: microcrystal,rv3028: add #clock-cells property
rtc: m48t59: Remove division condition with direct comparison
rtc: at91sam9: fix OF node leak in probe() error path
rtc: sun6i: disable automatic clock input switching
dt-bindings: rtc: Drop non-trivial duplicate compatibles
dt-bindings: vendor-prefixes: Add DFRobot.
dt-bindings: rtc: Add support for SD2405AL.
rtc: Add driver for SD2405AL
rtc: s35390a: Drop vendorless compatible string from match table
rtc: twl: convert comma to semicolon
dt-bindings: rtc: sprd,sc2731-rtc: convert to YAML
rtc: stm32: add alarm A out feature
rtc: stm32: add Low Speed Clock Output (LSCO) support
rtc: stm32: add pinctrl and pinmux interfaces
dt-bindings: rtc: stm32: describe pinmux nodes
The V3(s) will detect a valid external low frequency clock and if it is
not present will automatically switch to the internal one. This might
hide bugs and (hardware) configuration errors. It's even worse because
the internal RTC runs significantly slower (32.000Hz vs 32.768Hz).
Fortunately for us, the V3(s) has an (undocumented) bypass of this
switching and the driver already supports it by setting the
.has_auto_swt flag.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20240730194905.2587202-1-mwalle@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
There's no need to list "s35390a" in the DT match table. The I2C core
will strip any vendor prefix and match against the i2c_device_id table
which has an "s35390a" entry.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240826191321.1410668-1-robh@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The BBM module provides RTC feature. To i.MX95, this module is managed by
System Manager and exported System Control Management Interface(SCMI).
Linux could use i.MX SCMI BBM Extension protocol to use RTC feature.
This driver is to use SCMI interface to get/set RTC.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20240823-imx95-bbm-misc-v2-v8-6-e600ed9e9271@nxp.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
STM32 RTC can pulse some SOC pins when an RTC alarm expires.
This patch adds this functionality for alarm A. The pulse can out on three
pins RTC_OUT1, RTC_OUT2, RTC_OUT2_RMP (PC13, PB2, PI8 on stm32mp15)
(PC13, PB2, PI1 on stm32mp13) (PC13, PF4/PF6, PI8 on stm32mp25).
This patch only adds the functionality for devices which are using
st,stm32mp1-rtc and st,stm32mp25-rtc compatible.
Add "alarm-a" in pinmux functions.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240722160022.454226-5-valentin.caron@foss.st.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
RTC is able to output on a pin the "LSE" internal clock.
STM32 RTC is now registered as a clock provider.
It provides rtc_lsco clock, that means RTC_LSCO is output on either
RTC_OUT1 or RTC_OUT2_RMP, depending on pinmux DT property.
The clock is marked as CLK_IGNORE_UNUSED and CLK_IS_CRITICAL because
RTC_LSCO can be early required by devices needed it to init.
Add LSCO in pinmux functions.
Add "stm32_rtc_clean_outs" to disable LSCO. As RTC is part of "backup"
power domain, it is not reset during shutdown or reboot. So force LSCO
disable at probe.
Co-developed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20240722160022.454226-4-valentin.caron@foss.st.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
STM32 RTC is capable to handle 3 specific pins of the soc.
"out1, out2 and out2_rmp". To handle this, we use pinctrl framework.
There is a single pin per group.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240722160022.454226-3-valentin.caron@foss.st.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Introduce new st,stm32mp25-rtc compatible. It is based on st,stm32mp1-rtc.
Difference is that stm32mp25 soc implements a triple protection on RTC
registers:
- Secure bit based protection
- Privileged context based protection
- Compartment ID filtering based protection
This driver will now check theses configurations before probing to avoid
exceptions and fake reads on register.
At this time, driver needs only to check two resources: INIT and ALARM_A.
Other resources are not used.
Resource isolation framework (RIF) is a comprehensive set of hardware
blocks designed to enforce and manage isolation of STM32 hardware
resources, like memory and peripherals.
Link: https://www.st.com/resource/en/reference_manual/rm0457-stm32mp25xx-advanced-armbased-3264bit-mpus-stmicroelectronics.pdf#page=4081
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20240708153434.416287-3-valentin.caron@foss.st.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
While add it, also remove a comma after the sentinel entry in
rtc-hym8563.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240515194336.58342-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
`rtc_add_offset()` is called by `__rtc_read_time()`
and `__rtc_read_alarm()` to add the RTC's offset to
the raw read-outs from the device drivers. However,
in the latter case, a fix-up algorithm is run if
the RTC device does not report a full `struct rtc_time`
alarm value. In that case, the offset was forgot to be
added.
Fixes: fd6792bb02 ("rtc: fix alarm read and set offset")
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20240619140451.2800578-1-csokas.bence@prolan.hu
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
`tm_year` may go up to 299 if the device supports the
century bit. Therefore, subtracting may not give us
a valid 2-digit number, but modulo does.
Co-developed-by: Szentendrei, Tamás <szentendrei.tamas@prolan.hu>
Signed-off-by: Szentendrei, Tamás <szentendrei.tamas@prolan.hu>
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20240611072411.671600-2-csokas.bence@prolan.hu
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This patch enables the detection of the oscillator failure on mcp794xx chips.
Co-developed-by: Szentendrei, Tamás <szentendrei.tamas@prolan.hu>
Signed-off-by: Szentendrei, Tamás <szentendrei.tamas@prolan.hu>
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20240611072411.671600-1-csokas.bence@prolan.hu
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
As per the latest HW manual[1], there is an internal delay(~250 microsec)
from setting ALME = 0 to disabling the alarm function, so the user must
add a short delay of greater than 250µs between setting ALME = 0 and
clearing ALM.
Currently setting of ALME = 0 is done after clearing the ALM, so just
reverse the operation and add a delay of 275 microsec.
[1]https://www.renesas.com/us/en/document/dst/raa215300-datasheet?r=1506351
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20240618152635.48956-3-biju.das.jz@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
As per the latest HW manual[1], the INT# output is pulled low after the
alarm is triggered. After the INT# output is pulled low, it is low for at
least 250ms, even if the correct action is taken to clear it. It is
impossible to clear ALM if it is still active. The host must wait for the
RTC to progress past the alarm time plus the 250ms delay before clearing
ALM.
[1]https://www.renesas.com/us/en/document/dst/raa215300-datasheet?r=1506351
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20240618152635.48956-2-biju.das.jz@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
On x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/rtc/lib_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/rtc/rtc-goldfish.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/rtc/rtc-omap.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/rtc/rtc-rc5t583.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/rtc/rtc-tps65910.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/rtc/rtc-twl.o
Add the missing invocation of the MODULE_DESCRIPTION() macro to all
files which have a MODULE_LICENSE(). This includes rtc-mpc5121.c,
which does not produce a warning with the x86 allmodconfig since it is
not built for x86, but it may cause this warning with Freescale PPC
configurations.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240608-md-drivers-rtc-v1-1-5f44222adfae@quicinc.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Read callbacks registered with nvmem core expect 0 to be returned on
success and a negative value to be returned on failure.
abx80x_nvmem_xfer() on read calls i2c_smbus_read_i2c_block_data() which
returns the number of bytes read on success as per its api description,
this return value is handled as an error and returned to nvmem even on
success.
Fix to handle all possible values that would be returned by
i2c_smbus_read_i2c_block_data().
Fixes: e90ff8ede7 ("rtc: abx80x: Add nvmem support")
Cc: stable@vger.kernel.org
Signed-off-by: Joy Chakraborty <joychakr@google.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20240613120750.1455209-1-joychakr@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Read/write callbacks registered with nvmem core expect 0 to be returned
on success and a negative value to be returned on failure.
cmos_nvram_read()/cmos_nvram_write() currently return the number of
bytes read or written, fix to return 0 on success and -EIO incase number
of bytes requested was not read or written.
Fixes: 8b5b7958fd ("rtc: cmos: use generic nvmem")
Cc: stable@vger.kernel.org
Signed-off-by: Joy Chakraborty <joychakr@google.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240612083635.1253039-1-joychakr@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Read/write callbacks registered with nvmem core expect 0 to be returned
on success and a negative value to be returned on failure.
isl1208_nvmem_read()/isl1208_nvmem_write() currently return the number of
bytes read/written on success, fix to return 0 on success and negative on
failure.
Fixes: c3544f6f51 ("rtc: isl1208: Add new style nvmem support to driver")
Cc: stable@vger.kernel.org
Signed-off-by: Joy Chakraborty <joychakr@google.com>
Link: https://lore.kernel.org/r/20240612080831.1227131-1-joychakr@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add power management support to the driver. This allows a SoC to wake
from suspend using the nINT provided by the RTC.
It takes care of the case when the interrupt has not been caught because
the kernel has not yet woke up.
(This is the case when only edges interrupt are caught)
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Link: https://lore.kernel.org/r/20240618141851.1810000-4-richard.genoud@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This patch will prepare for the next one (power management support) by
introducing struct tps6594_rtc.
No functionnal change.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Link: https://lore.kernel.org/r/20240618141851.1810000-3-richard.genoud@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
struct rtc_device is allocated twice in probe(), once with
devm_kzalloc(), and then with devm_rtc_allocate_device().
The allocation with devm_kzalloc() is lost and superfluous.
Fixes: 9f67c1e639 ("rtc: tps6594: Add driver for TPS6594 RTC")
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Link: https://lore.kernel.org/r/20240618141851.1810000-2-richard.genoud@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
In some platforms, the RTC is able to wake up the system but is not
directly connected to an IRQ. Add wakeup-source property support to be able
to express this in the Device Tree.
Link: https://lore.kernel.org/r/20240426225821.448963-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Allow userspace to get battery status information and be able to warn when
battery is low and has to be replaced.
Tested-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://lore.kernel.org/r/20240417191937.33790-2-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The proper way for userspace to react on a read time error is to have a
look at the voltage low information. There is no point in cluttering dmesg
as it is often not even visible to the end user.
Reviewed-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://lore.kernel.org/r/20240417191937.33790-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
'regmap_spi_config' and 'regmap_i2c_config' are not modified in this diver
and are only used as a const struct regmap_config.
Constifying these structures moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
text data bss dec hex filename
8896 1554 32 10482 28f2 drivers/rtc/rtc-rx6110.o
After:
text data bss dec hex filename
9536 914 32 10482 28f2 drivers/rtc/rtc-rx6110.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/833a7f612c0de9dcb1179a0b75b189c237a335ac.1714862560.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
