The NXP switch tag is a proprietary header added to frames after the
source MAC address. The switch tag has 3 types, and different types
have multiple subtypes, the details are as follows.
- Forward NXP switch tag (Type=0) – Represents forwarded frames.
- SubType=0 - Normal frame processing.
- To_Port NXP switch tag (Type=1) – Represents frames that are to be
sent to a specific switch port.
- SubType=0 - No request to perform timestamping.
- SubType=1 - Request to perform one-step timestamping.
- SubType=2 - Request to perform two-step timestamping.
- To_Host NXP switch tag (Type=2) – Represents frames redirected or
copied to the switch management port.
- SubType=0 - Received frames redirected or copied to the switch
management port.
- SubType=1 - Received frames redirected or copied to the switch
management port with captured timestamp at the switch port where
the frame was received.
- SubType=2 - Transmit timestamp response (two-step timestamping).
Therefore, the length of different type switch tag is different, the
minimum length is 6 bytes, the maximum length is 14 bytes.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Clark Wang <xiaoning.wang@nxp.com>
[ Upstream commit 3f23f96528e8fcf8619895c4c916c52653892ec1 ]
BUG: KASAN: slab-use-after-free in tcp_write_timer_handler+0x156/0x3e0
Read of size 1 at addr ffff888111f322cd by task swapper/0/0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-rc4-dirty #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1
Call Trace:
<IRQ>
dump_stack_lvl+0x68/0xa0
print_address_description.constprop.0+0x2c/0x3d0
print_report+0xb4/0x270
kasan_report+0xbd/0xf0
tcp_write_timer_handler+0x156/0x3e0
tcp_write_timer+0x66/0x170
call_timer_fn+0xfb/0x1d0
__run_timers+0x3f8/0x480
run_timer_softirq+0x9b/0x100
handle_softirqs+0x153/0x390
__irq_exit_rcu+0x103/0x120
irq_exit_rcu+0xe/0x20
sysvec_apic_timer_interrupt+0x76/0x90
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20
RIP: 0010:default_idle+0xf/0x20
Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90
90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 33 f8 25 00 fb f4 <fa> c3 cc cc cc
cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90
RSP: 0018:ffffffffa2007e28 EFLAGS: 00000242
RAX: 00000000000f3b31 RBX: 1ffffffff4400fc7 RCX: ffffffffa09c3196
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff9f00590f
RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed102360835d
R10: ffff88811b041aeb R11: 0000000000000001 R12: 0000000000000000
R13: ffffffffa202d7c0 R14: 0000000000000000 R15: 00000000000147d0
default_idle_call+0x6b/0xa0
cpuidle_idle_call+0x1af/0x1f0
do_idle+0xbc/0x130
cpu_startup_entry+0x33/0x40
rest_init+0x11f/0x210
start_kernel+0x39a/0x420
x86_64_start_reservations+0x18/0x30
x86_64_start_kernel+0x97/0xa0
common_startup_64+0x13e/0x141
</TASK>
Allocated by task 595:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_slab_alloc+0x87/0x90
kmem_cache_alloc_noprof+0x12b/0x3f0
copy_net_ns+0x94/0x380
create_new_namespaces+0x24c/0x500
unshare_nsproxy_namespaces+0x75/0xf0
ksys_unshare+0x24e/0x4f0
__x64_sys_unshare+0x1f/0x30
do_syscall_64+0x70/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 100:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x54/0x70
kmem_cache_free+0x156/0x5d0
cleanup_net+0x5d3/0x670
process_one_work+0x776/0xa90
worker_thread+0x2e2/0x560
kthread+0x1a8/0x1f0
ret_from_fork+0x34/0x60
ret_from_fork_asm+0x1a/0x30
Reproduction script:
mkdir -p /mnt/nfsshare
mkdir -p /mnt/nfs/netns_1
mkfs.ext4 /dev/sdb
mount /dev/sdb /mnt/nfsshare
systemctl restart nfs-server
chmod 777 /mnt/nfsshare
exportfs -i -o rw,no_root_squash *:/mnt/nfsshare
ip netns add netns_1
ip link add name veth_1_peer type veth peer veth_1
ifconfig veth_1_peer 11.11.0.254 up
ip link set veth_1 netns netns_1
ip netns exec netns_1 ifconfig veth_1 11.11.0.1
ip netns exec netns_1 /root/iptables -A OUTPUT -d 11.11.0.254 -p tcp \
--tcp-flags FIN FIN -j DROP
(note: In my environment, a DESTROY_CLIENTID operation is always sent
immediately, breaking the nfs tcp connection.)
ip netns exec netns_1 timeout -s 9 300 mount -t nfs -o proto=tcp,vers=4.1 \
11.11.0.254:/mnt/nfsshare /mnt/nfs/netns_1
ip netns del netns_1
The reason here is that the tcp socket in netns_1 (nfs side) has been
shutdown and closed (done in xs_destroy), but the FIN message (with ack)
is discarded, and the nfsd side keeps sending retransmission messages.
As a result, when the tcp sock in netns_1 processes the received message,
it sends the message (FIN message) in the sending queue, and the tcp timer
is re-established. When the network namespace is deleted, the net structure
accessed by tcp's timer handler function causes problems.
To fix this problem, let's hold netns refcnt for the tcp kernel socket as
done in other modules. This is an ugly hack which can easily be backported
to earlier kernels. A proper fix which cleans up the interfaces will
follow, but may not be so easy to backport.
Fixes: 26abe14379 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7bdd849ef1b681da03ac05ca0957b2cbe2d24b6 ]
We've noticed a situation where an unstable TCP connection can cause the
TLS handshake to timeout waiting for userspace to complete it. When this
happens, we don't want to return from xs_tls_handshake_sync() with zero, as
this will cause the upper xprt to be set CONNECTED, and subsequent attempts
to transmit will be returned with -EPIPE. The sunrpc machine does not
recover from this situation and will spin attempting to transmit.
The return value of tls_handshake_cancel() can be used to detect a race
with completion:
* tls_handshake_cancel - cancel a pending handshake
* Return values:
* %true - Uncompleted handshake request was canceled
* %false - Handshake request already completed or not found
If true, we do not want the upper xprt to be connected, so return
-ETIMEDOUT. If false, its possible the handshake request was lost and
that may be the reason for our timeout. Again we do not want the upper
xprt to be connected, so return -ETIMEDOUT.
Ensure that we alway return an error from xs_tls_handshake_sync() if we
call tls_handshake_cancel().
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Fixes: 75eb6af7ac ("SUNRPC: Add a TCP-with-TLS RPC transport class")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4db9ad82a6c823094da27de4825af693a3475d51 ]
Since transport->sock has been set to NULL during reset transport,
XPRT_SOCK_UPD_TIMEOUT also needs to be cleared. Otherwise, the
xs_tcp_set_socket_timeouts() may be triggered in xs_tcp_send_request()
to dereference the transport->sock that has been set to NULL.
Fixes: 7196dbb02e ("SUNRPC: Allow changing of the TCP timeout parameters on the fly")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ef3ae82a6ebbf4750967d1ce43bcdb7e44ff74b ]
Large amount of mount hangs observed during hotplugging of 9pfs devices. The
9pfs Xen driver attempts to initialize itself more than once, causing the
frontend and backend to disagree: the backend listens on a channel that the
frontend does not send on, resulting in stalled processing.
Only allow initialization of 9p frontend once.
Fixes: c15fe55d14 ("9p/xen: fix connection sequence")
Signed-off-by: Alex Zenla <alex@edera.dev>
Signed-off-by: Alexander Merritt <alexander@edera.dev>
Signed-off-by: Ariadne Conill <ariadne@ariadne.space>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20241119211633.38321-1-alexander@edera.dev>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff1060813d9347e8c45c8b8cff93a4dfdb6726ad ]
On the linux-next, next-20241108 vanilla kernel, the coccinelle tool gave the
following error report:
./net/9p/trans_usbg.c:912:5-11: ERROR: allocation function on line 911 returns
NULL not ERR_PTR on failure
kzalloc() failure is fixed to handle the NULL return case on the memory exhaustion.
Fixes: a3be076dc1 ("net/9p/usbg: Add new usb gadget function transport")
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Cc: Eric Van Hensbergen <ericvh@kernel.org>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Christian Schoenebeck <linux_oss@crudebyte.com>
Cc: v9fs@lists.linux.dev
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Message-ID: <20241109211840.721226-2-mtodorovac69@gmail.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2862eee078a4d2d1f584e7f24fa50dddfa5f3471 upstream.
The function `c_show` was called with protection from RCU. This only
ensures that `cp` will not be freed. Therefore, the reference count for
`cp` can drop to zero, which will trigger a refcount use-after-free
warning when `cache_get` is called. To resolve this issue, use
`cache_get_rcu` to ensure that `cp` remains active.
------------[ cut here ]------------
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 7 PID: 822 at lib/refcount.c:25
refcount_warn_saturate+0xb1/0x120
CPU: 7 UID: 0 PID: 822 Comm: cat Not tainted 6.12.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
RIP: 0010:refcount_warn_saturate+0xb1/0x120
Call Trace:
<TASK>
c_show+0x2fc/0x380 [sunrpc]
seq_read_iter+0x589/0x770
seq_read+0x1e5/0x270
proc_reg_read+0xe1/0x140
vfs_read+0x125/0x530
ksys_read+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c53bf100f68619acf6cedcf4cf5249a1ca2db0b4 upstream.
Hold rcu_read_lock in netdev_nl_napi_get_doit, which calls napi_by_id
and is required to be called under rcu_read_lock.
Cc: stable@vger.kernel.org
Fixes: 27f91aaf49 ("netdev-genl: Add netlink framework functions for napi")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241114175157.16604-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35f56c554eb1b56b77b3cf197a6b00922d49033d upstream.
When tb[IPSET_ATTR_IP_TO] is not present but tb[IPSET_ATTR_CIDR] exists,
the values of ip and ip_to are slightly swapped. Therefore, the range check
for ip should be done later, but this part is missing and it seems that the
vulnerability occurs.
So we should add missing range checks and remove unnecessary range checks.
Cc: <stable@vger.kernel.org>
Reported-by: syzbot+58c872f7790a4d2ac951@syzkaller.appspotmail.com
Fixes: 72205fc68b ("netfilter: ipset: bitmap:ip set type support")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c46a3a5b394d6d123866aa44436fc2cd342eb0d upstream.
The channels array in the cfg80211_scan_request has a __counted_by
attribute attached to it, which points to the n_channels variable. This
attribute is used in bounds checking, and if it is not set before the
array is filled, then the bounds sanitizer will issue a warning or a
kernel panic if CONFIG_UBSAN_TRAP is set.
This patch sets the size of allocated memory as the initial value for
n_channels. It is updated with the actual number of added elements after
the array is filled.
Fixes: aa4ec06c45 ("wifi: cfg80211: use __counted_by where appropriate")
Cc: stable@vger.kernel.org
Signed-off-by: Aleksei Vetrov <vvvvvv@google.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20241029-nl80211_parse_sched_scan-bounds-checker-fix-v2-1-c804b787341f@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5fe6caa62b07fd39cd6a28acc8f92ba2955e11a6 upstream.
Commit 9bf4e919cc worked around an issue introduced after an innocuous
optimisation change in LLVM main:
> len is defined as an 'int' because it is assigned from
> '__user int *optlen'. However, it is clamped against the result of
> sizeof(), which has a type of 'size_t' ('unsigned long' for 64-bit
> platforms). This is done with min_t() because min() requires compatible
> types, which results in both len and the result of sizeof() being casted
> to 'unsigned int', meaning len changes signs and the result of sizeof()
> is truncated. From there, len is passed to copy_to_user(), which has a
> third parameter type of 'unsigned long', so it is widened and changes
> signs again. This excessive casting in combination with the KCSAN
> instrumentation causes LLVM to fail to eliminate the __bad_copy_from()
> call, failing the build.
The same issue occurs in rfcomm in functions rfcomm_sock_getsockopt and
rfcomm_sock_getsockopt_old.
Change the type of len to size_t in both rfcomm_sock_getsockopt and
rfcomm_sock_getsockopt_old and replace min_t() with min().
Cc: stable@vger.kernel.org
Co-authored-by: Aleksei Vetrov <vvvvvv@google.com>
Improves: 9bf4e919cc ("Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old()")
Link: https://github.com/ClangBuiltLinux/linux/issues/2007
Link: https://github.com/llvm/llvm-project/issues/85647
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 122aba8c80618eca904490b1733af27fb8f07528 upstream.
Recent kernels cause a lot of TCP retransmissions
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 2.24 GBytes 19.2 Gbits/sec 2767 442 KBytes
[ 5] 1.00-2.00 sec 2.23 GBytes 19.1 Gbits/sec 2312 350 KBytes
^^^^
Replacing the qdisc with pfifo makes retransmissions go away.
It appears that a flow may have a delayed packet with a very near
Tx time. Later, we may get busy processing Rx and the target Tx time
will pass, but we won't service Tx since the CPU is busy with Rx.
If Rx sees an ACK and we try to push more data for the delayed flow
we may fastpath the skb, not realizing that there are already "ready
to send" packets for this flow sitting in the qdisc.
Don't trust the fastpath if we are "behind" according to the projected
Tx time for next flow waiting in the Qdisc. Because we consider anything
within the offload window to be okay for fastpath we must consider
the entire offload window as "now".
Qdisc config:
qdisc fq 8001: dev eth0 parent 1234:1 limit 10000p flow_limit 100p \
buckets 32768 orphan_mask 1023 bands 3 \
priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 \
weights 589824 196608 65536 quantum 3028b initial_quantum 15140b \
low_rate_threshold 550Kbit \
refill_delay 40ms timer_slack 10us horizon 10s horizon_drop
For iperf this change seems to do fine, the reordering is gone.
The fastpath still gets used most of the time:
gc 0 highprio 0 fastpath 142614 throttled 418309 latency 19.1us
xx_behind 2731
where "xx_behind" counts how many times we hit the new "return false".
CC: stable@vger.kernel.org
Fixes: 076433bd78 ("net_sched: sch_fq: add fast path for mostly idle qdisc")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241124022148.3126719-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[stable: drop the offload horizon, it's not supported / 0]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fc9c273d6daaa9866f349bbe8cae25c67764c456 ]
Similar to the previous patch, plumb the RCU lock inside
the ipmr_get_table(), provided a lockless variant and apply
the latter in the few spots were the lock is already held.
Fixes: 709b46e8d9 ("net: Add compat ioctl support for the ipv4 multicast ioctl SIOCGETSGCNT")
Fixes: f0ad0860d0 ("ipv4: ipmr: support multiple tables")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1553c9894b4dbeb10a2ab15ab1aa113b3b4047c ]
Several places call ip6mr_get_table() with no RCU nor RTNL lock.
Add RCU protection inside such helper and provide a lockless variant
for the few callers that already acquired the relevant lock.
Note that some users additionally reference the table outside the RCU
lock. That is actually safe as the table deletion can happen only
after all table accesses are completed.
Fixes: e2d57766e6 ("net: Provide compat support for SIOCGETMIFCNT_IN6 and SIOCGETSGCNT_IN6.")
Fixes: d7c31cbde4 ("net: ip6mr: add RTM_GETROUTE netlink op")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c31e72d021db2714df03df6c42855a1db592716c ]
The cited commit replaced inet_csk_reqsk_queue_drop_and_put() with
__inet_csk_reqsk_queue_drop() and reqsk_put() in reqsk_timer_handler().
Then, oreq should be passed to reqsk_put() instead of req; otherwise
use-after-free of nreq could happen when reqsk is migrated but the
retry attempt failed (e.g. due to timeout).
Let's pass oreq to reqsk_put().
Fixes: e8c526f2bd ("tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink().")
Reported-by: Liu Jian <liujian56@huawei.com>
Closes: https://lore.kernel.org/netdev/1284490f-9525-42ee-b7b8-ccadf6606f6d@huawei.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20241123174236.62438-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02020056647017e70509bb58c3096448117099e1 ]
copy_from_sockptr() does not return negative value on error; instead, it
reports the number of bytes that failed to copy. Since it's deprecated,
switch to copy_safe_from_sockptr().
Note: Keeping the `optlen != sizeof(unsigned int)` check as
copy_safe_from_sockptr() by itself would also accept
optlen > sizeof(unsigned int). Which would allow a more lenient handling
of inputs.
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1465036b10be4b8b00eb31c879e86de633ad74c1 ]
copy_from_sockptr() is used incorrectly: return value is the number of
bytes that could not be copied. Since it's deprecated, switch to
copy_safe_from_sockptr().
Note: Keeping the `optlen != sizeof(int)` check as copy_safe_from_sockptr()
by itself would also accept optlen > sizeof(int). Which would allow a more
lenient handling of inputs.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Suggested-by: David Wei <dw@davidwei.uk>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9cfb5e7f0ded2bfaabc270ceb5f91d13f0e805b9 ]
Following sequence in hsr_init_sk() is invalid :
skb_reset_mac_header(skb);
skb_reset_mac_len(skb);
skb_reset_network_header(skb);
skb_reset_transport_header(skb);
It is invalid because skb_reset_mac_len() needs the correct
network header, which should be after the mac header.
This patch moves the skb_reset_network_header()
and skb_reset_transport_header() before
the call to dev_hard_header().
As a result skb->mac_len is no longer set to a value
close to 65535.
Fixes: 48b491a5cc ("net: hsr: fix mac_len checks")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: George McCollister <george.mccollister@gmail.com>
Link: https://patch.msgid.link/20241122171343.897551-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00b5b7aab9e422d00d5a9d03d7e0760a76b5d57f ]
RFC8981 section 3.4 says that existing temporary addresses must have their
lifetimes adjusted so that no temporary addresses should ever remain "valid"
or "preferred" longer than the incoming SLAAC Prefix Information. This would
strongly imply in Linux's case that if the "mngtmpaddr" address is deleted or
un-flagged as such, its corresponding temporary addresses must be cleared out
right away.
But now the temporary address is renewed even after ‘mngtmpaddr’ is removed
or becomes unmanaged as manage_tempaddrs() set temporary addresses
prefered/valid time to 0, and later in addrconf_verify_rtnl() all checkings
failed to remove the addresses. Fix this by deleting the temporary address
directly for these situations.
Fixes: 778964f2fd ("ipv6/addrconf: fix timing bug in tempaddr regen")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebaf81317e42aa990ad20b113cfe3a7b20d4e937 ]
Passing MSG_PEEK flag to skb_recv_datagram() increments skb refcount
(skb->users) and iucv_sock_recvmsg() does not decrement skb refcount
at exit.
This results in skb memory leak in skb_queue_purge() and WARN_ON in
iucv_sock_destruct() during socket close. To fix this decrease
skb refcount by one if MSG_PEEK is set in order to prevent memory
leak and WARN_ON.
WARNING: CPU: 2 PID: 6292 at net/iucv/af_iucv.c:286 iucv_sock_destruct+0x144/0x1a0 [af_iucv]
CPU: 2 PID: 6292 Comm: afiucv_test_msg Kdump: loaded Tainted: G W 6.10.0-rc7 #1
Hardware name: IBM 3931 A01 704 (z/VM 7.3.0)
Call Trace:
[<001587c682c4aa98>] iucv_sock_destruct+0x148/0x1a0 [af_iucv]
[<001587c682c4a9d0>] iucv_sock_destruct+0x80/0x1a0 [af_iucv]
[<001587c704117a32>] __sk_destruct+0x52/0x550
[<001587c704104a54>] __sock_release+0xa4/0x230
[<001587c704104c0c>] sock_close+0x2c/0x40
[<001587c702c5f5a8>] __fput+0x2e8/0x970
[<001587c7024148c4>] task_work_run+0x1c4/0x2c0
[<001587c7023b0716>] do_exit+0x996/0x1050
[<001587c7023b13aa>] do_group_exit+0x13a/0x360
[<001587c7023b1626>] __s390x_sys_exit_group+0x56/0x60
[<001587c7022bccca>] do_syscall+0x27a/0x380
[<001587c7049a6a0c>] __do_syscall+0x9c/0x160
[<001587c7049ce8a8>] system_call+0x70/0x98
Last Breaking-Event-Address:
[<001587c682c4a9d4>] iucv_sock_destruct+0x84/0x1a0 [af_iucv]
Fixes: eac3731bd0 ("[S390]: Add AF_IUCV socket support")
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20241119152219.3712168-1-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d066766c5f1252f98ff859265bcd1a5b52ac46c ]
In l2tp's net exit handler, we check that an IDR is empty before
destroying it:
WARN_ON_ONCE(!idr_is_empty(&pn->l2tp_tunnel_idr));
idr_destroy(&pn->l2tp_tunnel_idr);
By forcing memory allocation failures in idr_alloc_32, syzbot is able
to provoke a condition where idr_is_empty returns false despite there
being no items in the IDR. This turns out to be because the radix tree
of the IDR contains only internal radix-tree nodes and it is this that
causes idr_is_empty to return false. The internal nodes are cleaned by
idr_destroy.
Use idr_for_each to check that the IDR is empty instead of
idr_is_empty to avoid the problem.
Reported-by: syzbot+332fe1e67018625f63c9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=332fe1e67018625f63c9
Fixes: 73d33bd063 ("l2tp: avoid using drain_workqueue in l2tp_pre_exit_net")
Signed-off-by: James Chapman <jchapman@katalix.com>
Link: https://patch.msgid.link/20241118140411.1582555-1-jchapman@katalix.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3bf39fa849ab8ed52abb6715922e6102d3df9f97 ]
Commit under fixes extended extack reporting to dumps.
It works under normal conditions, because extack errors are
usually reported during ->start() or the first ->dump(),
it's quite rare that the dump starts okay but fails later.
If the dump does fail later, however, the input skb will
already have the initiating message pulled, so checking
if bad attr falls within skb->data will fail.
Switch the check to using nlh, which is always valid.
syzbot found a way to hit that scenario by filling up
the receive queue. In this case we initiate a dump
but don't call ->dump() until there is read space for
an skb.
WARNING: CPU: 1 PID: 5845 at net/netlink/af_netlink.c:2210 netlink_ack_tlv_fill+0x1a8/0x560 net/netlink/af_netlink.c:2209
RIP: 0010:netlink_ack_tlv_fill+0x1a8/0x560 net/netlink/af_netlink.c:2209
Call Trace:
<TASK>
netlink_dump_done+0x513/0x970 net/netlink/af_netlink.c:2250
netlink_dump+0x91f/0xe10 net/netlink/af_netlink.c:2351
netlink_recvmsg+0x6bb/0x11d0 net/netlink/af_netlink.c:1983
sock_recvmsg_nosec net/socket.c:1051 [inline]
sock_recvmsg+0x22f/0x280 net/socket.c:1073
__sys_recvfrom+0x246/0x3d0 net/socket.c:2267
__do_sys_recvfrom net/socket.c:2285 [inline]
__se_sys_recvfrom net/socket.c:2281 [inline]
__x64_sys_recvfrom+0xde/0x100 net/socket.c:2281
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff37dd17a79
Reported-by: syzbot+d4373fa8042c06cefa84@syzkaller.appspotmail.com
Fixes: 8af4f60472 ("netlink: support all extack types in dumps")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241119224432.1713040-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce89e742a4c12b20f09a43fec1b21db33f2166cd ]
There's issue as follows:
RPC: Registered rdma transport module.
RPC: Registered rdma backchannel transport module.
RPC: Unregistered rdma transport module.
RPC: Unregistered rdma backchannel transport module.
BUG: unable to handle page fault for address: fffffbfff80c609a
PGD 123fee067 P4D 123fee067 PUD 123fea067 PMD 10c624067 PTE 0
Oops: Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
RIP: 0010:percpu_counter_destroy_many+0xf7/0x2a0
Call Trace:
<TASK>
__die+0x1f/0x70
page_fault_oops+0x2cd/0x860
spurious_kernel_fault+0x36/0x450
do_kern_addr_fault+0xca/0x100
exc_page_fault+0x128/0x150
asm_exc_page_fault+0x26/0x30
percpu_counter_destroy_many+0xf7/0x2a0
mmdrop+0x209/0x350
finish_task_switch.isra.0+0x481/0x840
schedule_tail+0xe/0xd0
ret_from_fork+0x23/0x80
ret_from_fork_asm+0x1a/0x30
</TASK>
If register_sysctl() return NULL, then svc_rdma_proc_cleanup() will not
destroy the percpu counters which init in svc_rdma_proc_init().
If CONFIG_HOTPLUG_CPU is enabled, residual nodes may be in the
'percpu_counters' list. The above issue may occur once the module is
removed. If the CONFIG_HOTPLUG_CPU configuration is not enabled, memory
leakage occurs.
To solve above issue just destroy all percpu counters when
register_sysctl() return NULL.
Fixes: 1e7e557316 ("svcrdma: Restore read and write stats")
Fixes: 22df5a2246 ("svcrdma: Convert rdma_stat_sq_starve to a per-CPU counter")
Fixes: df971cd853 ("svcrdma: Convert rdma_stat_recv to a per-CPU counter")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ca2a1eeadf09862190b2810697702d803ceef2d ]
When the stream_verdict program returns SK_PASS, it places the received skb
into its own receive queue, but a recursive lock eventually occurs, leading
to an operating system deadlock. This issue has been present since v6.9.
'''
sk_psock_strp_data_ready
write_lock_bh(&sk->sk_callback_lock)
strp_data_ready
strp_read_sock
read_sock -> tcp_read_sock
strp_recv
cb.rcv_msg -> sk_psock_strp_read
# now stream_verdict return SK_PASS without peer sock assign
__SK_PASS = sk_psock_map_verd(SK_PASS, NULL)
sk_psock_verdict_apply
sk_psock_skb_ingress_self
sk_psock_skb_ingress_enqueue
sk_psock_data_ready
read_lock_bh(&sk->sk_callback_lock) <= dead lock
'''
This topic has been discussed before, but it has not been fixed.
Previous discussion:
https://lore.kernel.org/all/6684a5864ec86_403d20898@john.notmuch
Fixes: 6648e61322 ("bpf, skmsg: Fix NULL pointer dereference in sk_psock_skb_ingress_enqueue")
Reported-by: Vincent Whitchurch <vincent.whitchurch@datadoghq.com>
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20241118030910.36230-2-mrpre@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c0d0f42ffa6ac94cd79893b7ed419c15e1b45de ]
When a new skb is allocated for transmitting an xsk descriptor, i.e., for
every non-multibuf descriptor or the first frag of a multibuf descriptor,
but the descriptor is later found to have invalid options set for the TX
metadata, the new skb is never freed. This can leak skbs until the send
buffer is full which makes sending more packets impossible.
Fix this by freeing the skb in the error path if we are currently dealing
with the first frag, i.e., an skb allocated in this iteration of
xsk_build_skb.
Fixes: 48eb03dd26 ("xsk: Add TX timestamp and TX checksum offload support")
Reported-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/edb9b00fb19e680dff5a3350cd7581c5927975a8.1731581697.git.fmaurer@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07a9342b94a91b306ed1cf6aa8254aea210764c9 ]
Before issuing the LE BIG Create Sync command, an available BIG handle
is chosen by iterating through the conn_hash list and finding the first
unused value.
If a BIG is terminated, the associated hcons are removed from the list
and the LE BIG Terminate Sync command is sent via hci_sync queue.
However, a new LE BIG Create sync command might be issued via
hci_send_cmd, before the previous BIG sync was terminated. This
can cause the same BIG handle to be reused and the LE BIG Create Sync
to fail with Command Disallowed.
< HCI Command: LE Broadcast Isochronous Group Create Sync (0x08|0x006b)
BIG Handle: 0x00
BIG Sync Handle: 0x0002
Encryption: Unencrypted (0x00)
Broadcast Code[16]: 00000000000000000000000000000000
Maximum Number Subevents: 0x00
Timeout: 20000 ms (0x07d0)
Number of BIS: 1
BIS ID: 0x01
> HCI Event: Command Status (0x0f) plen 4
LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1
Status: Command Disallowed (0x0c)
< HCI Command: LE Broadcast Isochronous Group Terminate Sync (0x08|0x006c)
BIG Handle: 0x00
This commit fixes the ordering of the LE BIG Create Sync/LE BIG Terminate
Sync commands, to make sure that either the previous BIG sync is
terminated before reusing the handle, or that a new handle is chosen
for a new sync.
Fixes: eca0ae4aea ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42ecf1947135110ea08abeaca39741636f9a2285 ]
The Bluetooth Core spec does not allow a LE BIG Create sync command to be
sent to Controller if another one is pending (Vol 4, Part E, page 2586).
In order to avoid this issue, the HCI_CONN_CREATE_BIG_SYNC was added
to mark that the LE BIG Create Sync command has been sent for a hcon.
Once the BIG Sync Established event is received, the hcon flag is
erased and the next pending hcon is handled.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 07a9342b94a9 ("Bluetooth: ISO: Send BIG Create Sync via hci_sync")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a5e0ba68676b3a77298cf646cd2b39c94fbd2f5 ]
The Bluetooth Core spec does not allow a LE PA Create sync command to be
sent to Controller if another one is pending (Vol 4, Part E, page 2493).
In order to avoid this issue, the HCI_CONN_CREATE_PA_SYNC was added
to mark that the LE PA Create Sync command has been sent for a hcon.
Once the PA Sync Established event is received, the hcon flag is
erased and the next pending hcon is handled.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 07a9342b94a9 ("Bluetooth: ISO: Send BIG Create Sync via hci_sync")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc26097bdb864a0d5955b9a25e43376ffc1af99b ]
This make use of kref to keep track of reference of iso_conn which
allows better tracking of its lifetime with usage of things like
kref_get_unless_zero in a similar way as used in l2cap_chan.
In addition to it remove call to iso_sock_set_timer on iso_sock_disconn
since at that point it is useless to set a timer as the sk will be freed
there is nothing to be done in iso_sock_timeout.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9ccb18f83ea2bb654289b6ecf014fd267cc988b ]
Soft lockups have been observed on a cluster of Linux-based edge routers
located in a highly dynamic environment. Using the `bird` service, these
routers continuously update BGP-advertised routes due to frequently
changing nexthop destinations, while also managing significant IPv6
traffic. The lockups occur during the traversal of the multipath
circular linked-list in the `fib6_select_path` function, particularly
while iterating through the siblings in the list. The issue typically
arises when the nodes of the linked list are unexpectedly deleted
concurrently on a different core—indicated by their 'next' and
'previous' elements pointing back to the node itself and their reference
count dropping to zero. This results in an infinite loop, leading to a
soft lockup that triggers a system panic via the watchdog timer.
Apply RCU primitives in the problematic code sections to resolve the
issue. Where necessary, update the references to fib6_siblings to
annotate or use the RCU APIs.
Include a test script that reproduces the issue. The script
periodically updates the routing table while generating a heavy load
of outgoing IPv6 traffic through multiple iperf3 clients. It
consistently induces infinite soft lockups within a couple of minutes.
Kernel log:
0 [ffffbd13003e8d30] machine_kexec at ffffffff8ceaf3eb
1 [ffffbd13003e8d90] __crash_kexec at ffffffff8d0120e3
2 [ffffbd13003e8e58] panic at ffffffff8cef65d4
3 [ffffbd13003e8ed8] watchdog_timer_fn at ffffffff8d05cb03
4 [ffffbd13003e8f08] __hrtimer_run_queues at ffffffff8cfec62f
5 [ffffbd13003e8f70] hrtimer_interrupt at ffffffff8cfed756
6 [ffffbd13003e8fd0] __sysvec_apic_timer_interrupt at ffffffff8cea01af
7 [ffffbd13003e8ff0] sysvec_apic_timer_interrupt at ffffffff8df1b83d
-- <IRQ stack> --
8 [ffffbd13003d3708] asm_sysvec_apic_timer_interrupt at ffffffff8e000ecb
[exception RIP: fib6_select_path+299]
RIP: ffffffff8ddafe7b RSP: ffffbd13003d37b8 RFLAGS: 00000287
RAX: ffff975850b43600 RBX: ffff975850b40200 RCX: 0000000000000000
RDX: 000000003fffffff RSI: 0000000051d383e4 RDI: ffff975850b43618
RBP: ffffbd13003d3800 R8: 0000000000000000 R9: ffff975850b40200
R10: 0000000000000000 R11: 0000000000000000 R12: ffffbd13003d3830
R13: ffff975850b436a8 R14: ffff975850b43600 R15: 0000000000000007
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
9 [ffffbd13003d3808] ip6_pol_route at ffffffff8ddb030c
10 [ffffbd13003d3888] ip6_pol_route_input at ffffffff8ddb068c
11 [ffffbd13003d3898] fib6_rule_lookup at ffffffff8ddf02b5
12 [ffffbd13003d3928] ip6_route_input at ffffffff8ddb0f47
13 [ffffbd13003d3a18] ip6_rcv_finish_core.constprop.0 at ffffffff8dd950d0
14 [ffffbd13003d3a30] ip6_list_rcv_finish.constprop.0 at ffffffff8dd96274
15 [ffffbd13003d3a98] ip6_sublist_rcv at ffffffff8dd96474
16 [ffffbd13003d3af8] ipv6_list_rcv at ffffffff8dd96615
17 [ffffbd13003d3b60] __netif_receive_skb_list_core at ffffffff8dc16fec
18 [ffffbd13003d3be0] netif_receive_skb_list_internal at ffffffff8dc176b3
19 [ffffbd13003d3c50] napi_gro_receive at ffffffff8dc565b9
20 [ffffbd13003d3c80] ice_receive_skb at ffffffffc087e4f5 [ice]
21 [ffffbd13003d3c90] ice_clean_rx_irq at ffffffffc0881b80 [ice]
22 [ffffbd13003d3d20] ice_napi_poll at ffffffffc088232f [ice]
23 [ffffbd13003d3d80] __napi_poll at ffffffff8dc18000
24 [ffffbd13003d3db8] net_rx_action at ffffffff8dc18581
25 [ffffbd13003d3e40] __do_softirq at ffffffff8df352e9
26 [ffffbd13003d3eb0] run_ksoftirqd at ffffffff8ceffe47
27 [ffffbd13003d3ec0] smpboot_thread_fn at ffffffff8cf36a30
28 [ffffbd13003d3ee8] kthread at ffffffff8cf2b39f
29 [ffffbd13003d3f28] ret_from_fork at ffffffff8ce5fa64
30 [ffffbd13003d3f50] ret_from_fork_asm at ffffffff8ce03cbb
Fixes: 66f5d6ce53 ("ipv6: replace rwlock with rcu and spinlock in fib6_table")
Reported-by: Adrian Oliver <kernel@aoliver.ca>
Signed-off-by: Omid Ehtemam-Haghighi <omid.ehtemamhaghighi@menlosecurity.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241106010236.1239299-1-omid.ehtemamhaghighi@menlosecurity.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4ebb58cb9a4b1b5cb5278b09d6afdcd71b2a6b4 ]
Currently, when the driver attempts to connect to an AP MLD with multiple
APs, the cfg80211_mlme_check_mlo_compat() function requires the Medium
Synchronization Delay values from different APs of the same AP MLD to be
equal, which may result in connection failures.
This is because when the driver receives a multi-link probe response from
an AP MLD with multiple APs, cfg80211 updates the Elements for each AP
based on the multi-link probe response. If the Medium Synchronization Delay
is set in the multi-link probe response, the Elements for each AP belonging
to the same AP MLD will have the Medium Synchronization Delay set
simultaneously. If non-multi-link probe responses are received from
different APs of the same MLD AP, cfg80211 will still update the Elements
based on the non-multi-link probe response. Since the non-multi-link probe
response does not set the Medium Synchronization Delay
(IEEE 802.11be-2024-35.3.4.4), if the Elements from a non-multi-link probe
response overwrite those from a multi-link probe response that has set the
Medium Synchronization Delay, the Medium Synchronization Delay values for
APs belonging to the same AP MLD will not be equal. This discrepancy causes
the cfg80211_mlme_check_mlo_compat() function to fail, leading to
connection failures. Commit ccb964b4ab
("wifi: cfg80211: validate MLO connections better") did not take this into
account.
To address this issue, remove this validity check.
Fixes: ccb964b4ab ("wifi: cfg80211: validate MLO connections better")
Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Link: https://patch.msgid.link/20241031134223.970-1-quic_lingbok@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb02688c5c45c3e7af7e71f036a7144f5639cbfe ]
The CI is hitting some aperiodic hangup at device removal time in the
pmtu.sh self-test:
unregister_netdevice: waiting for veth_A-R1 to become free. Usage count = 6
ref_tracker: veth_A-R1@ffff888013df15d8 has 1/5 users at
dst_init+0x84/0x4a0
dst_alloc+0x97/0x150
ip6_dst_alloc+0x23/0x90
ip6_rt_pcpu_alloc+0x1e6/0x520
ip6_pol_route+0x56f/0x840
fib6_rule_lookup+0x334/0x630
ip6_route_output_flags+0x259/0x480
ip6_dst_lookup_tail.constprop.0+0x5c2/0x940
ip6_dst_lookup_flow+0x88/0x190
udp_tunnel6_dst_lookup+0x2a7/0x4c0
vxlan_xmit_one+0xbde/0x4a50 [vxlan]
vxlan_xmit+0x9ad/0xf20 [vxlan]
dev_hard_start_xmit+0x10e/0x360
__dev_queue_xmit+0xf95/0x18c0
arp_solicit+0x4a2/0xe00
neigh_probe+0xaa/0xf0
While the first suspect is the dst_cache, explicitly tracking the dst
owing the last device reference via probes proved such dst is held by
the nexthop in the originating fib6_info.
Similar to commit f5b51fe804 ("ipv6: route: purge exception on
removal"), we need to explicitly release the originating fib info when
disconnecting a to-be-removed device from a live ipv6 dst: move the
fib6_info cleanup into ip6_dst_ifdown().
Tested running:
./pmtu.sh cleanup_ipv6_exception
in a tight loop for more than 400 iterations with no spat, running an
unpatched kernel I observed a splat every ~10 iterations.
Fixes: f88d8ea67f ("ipv6: Plumb support for nexthop object in a fib6_info")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/604c45c188c609b732286b47ac2a451a40f6cf6d.1730828007.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 955afd57dc4bf7e8c620a0a9e3af3c881c2c6dff ]
Found in the test_txmsg_pull in test_sockmap,
```
txmsg_cork = 512; // corking is importrant here
opt->iov_length = 3;
opt->iov_count = 1;
opt->rate = 512; // sendmsg will be invoked 512 times
```
The first sendmsg will send an sk_msg with size 3, and bpf_msg_pull_data
will be invoked the first time. sk_msg_reset_curr will reset the copybreak
from 3 to 0. In the second sendmsg, since we are in the stage of corking,
psock->cork will be reused in func sk_msg_alloc. msg->sg.copybreak is 0
now, the second msg will overwrite the first msg. As a result, we could
not pass the data integrity test.
The same problem happens in push and pop test. Thus, fix sk_msg_reset_curr
to restore the correct copybreak.
Fixes: bb9aefde5b ("bpf: sockmap, updating the sg structure should also update curr")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Link: https://lore.kernel.org/r/20241106222520.527076-9-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d609ba262475db450ba69b8e8a557bd768ac07a ]
Several fixes to bpf_msg_pop_data,
1. In sk_msg_shift_left, we should put_page
2. if (len == 0), return early is better
3. pop the entire sk_msg (last == msg->sg.size) should be supported
4. Fix for the value of variable "a"
5. In sk_msg_shift_left, after shifting, i has already pointed to the next
element. Addtional sk_msg_iter_var_next may result in BUG.
Fixes: 7246d8ed4d ("bpf: helper to pop data from messages")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-8-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15ab0548e3107665c34579ae523b2b6e7c22082a ]
Several fixes to bpf_msg_push_data,
1. test_sockmap has tests where bpf_msg_push_data is invoked to push some
data at the end of a message, but -EINVAL is returned. In this case, in
bpf_msg_push_data, after the first loop, i will be set to msg->sg.end, add
the logic to handle it.
2. In the code block of "if (start - offset)", it's possible that "i"
points to the last of sk_msg_elem. In this case, "sk_msg_iter_next(msg,
end)" might still be called twice, another invoking is in "if (!copy)"
code block, but actually only one is needed. Add the logic to handle it,
and reconstruct the code to make the logic more clear.
Fixes: 6fff607e2f ("bpf: sk_msg program helper bpf_msg_push_data")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Link: https://lore.kernel.org/r/20241106222520.527076-7-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cddc04275f95ca3b18da5c0fb111705ac173af89 ]
Update of stateful object triggers:
WARNING: suspicious RCU usage
net/netfilter/nf_tables_api.c:7759 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by nft/3060:
#0: ffff88810f0578c8 (&nft_net->commit_mutex){+.+.}-{4:4}, [..]
... but this list is not protected by the transaction mutex but the
nfnl nftables subsystem mutex.
Switch to nft_obj_type_get which will acquire rcu read lock,
bump refcount, and returns the result.
v3: Dan Carpenter points out nft_obj_type_get returns error pointer, not
NULL, on error.
Fixes: dad3bdeef4 ("netfilter: nf_tables: fix memory leak during stateful obj update").
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee666a541ed957937454d50afa4757924508cd74 ]
nft shell tests trigger:
WARNING: suspicious RCU usage
net/netfilter/nf_tables_api.c:3125 RCU-list traversed in non-reader section!!
1 lock held by nft/2068:
#0: ffff888106c6f8c8 (&nft_net->commit_mutex){+.+.}-{4:4}, at: nf_tables_valid_genid+0x3c/0xf0
But the transaction mutex doesn't protect this list, the nfnl subsystem
mutex would, but we can't acquire it here without risk of ABBA
deadlocks.
Acquire the rcu read lock to avoid this issue.
v3: add a comment that explains the ->inner_ops check implies
expression is builtin and lack of a module owner reference is ok.
Fixes: 3a07327d10 ("netfilter: nft_inner: support for inner tunnel header matching")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9adbb4198bf6cf3634032871118a7052aeaa573f ]
On rule delete we get:
WARNING: suspicious RCU usage
net/netfilter/nf_tables_api.c:3420 RCU-list traversed in non-reader section!!
1 lock held by iptables/134:
#0: ffff888008c4fcc8 (&nft_net->commit_mutex){+.+.}-{3:3}, at: nf_tables_valid_genid (include/linux/jiffies.h:101) nf_tables
Code is fine, no other CPU can change the list because we're holding
transaction mutex.
Pass the needed lockdep annotation to the iterator and fix
two comments for functions that are no longer restricted to rcu-only
context.
This is enough to resolve rule delete, but there are several other
missing annotations, added in followup-patches.
Fixes: 28875945ba ("rcu: Add support for consolidated-RCU reader checking")
Reported-by: Matthieu Baerts <matttbe@kernel.org>
Tested-by: Matthieu Baerts <matttbe@kernel.org>
Closes: https://lore.kernel.org/netfilter-devel/da27f17f-3145-47af-ad0f-7fd2a823623e@kernel.org/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd9813d13be439851a7ff3e6372e53caa6e387a6 ]
Currently, wiphy_verify_combinations() fails for the multi-radio per wiphy
due to the condition check on new global interface combination that DFS
only works on one channel. In a multi-radio scenario, new global interface
combination encompasses the capabilities of all radio combinations, so it
supports more than one channel with DFS. For multi-radio per wiphy,
interface combination verification needs to be performed for radio specific
interface combinations. This is necessary as the new global interface
combination combines the capabilities of all radio combinations.
Fixes: a01b1e9f99 ("wifi: mac80211: add support for DFS with multiple radios")
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Link: https://patch.msgid.link/20240917140239.886083-1-quic_periyasa@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e629295bd60abf4da1db85b82819ca6a4f6c1e79 upstream.
When hvs is released, there is a possibility that vsk->trans may not
be initialized to NULL, which could lead to a dangling pointer.
This issue is resolved by initializing vsk->trans to NULL.
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/Zys4hCj61V+mQfX2@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently VLANs are deleted by trying both available methods, from the
8021q filters and through switchdev, in the hope that at least one of
them will get the desired result. This only leads to unnecessary calls
to the switch driver.
Take advantage of the BR_VLFLAG_ADDED_BY_SWITCHDEV flag which can be
used to determine the method to be used.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
VLANs that were installed on non-offloaded intermediate bridge ports
(bonding) through the 8021q filters need to be migrated to switchdev in
case an offloading driver has appeared in the meantime.
This means that any vlan which does not have the
BR_VLFLAG_ADDED_BY_SWITCHDEV flag will need to be removed from the 8021q
filters through vlan_vid_del() before re-adding it through switchdev by
calling the br_switchdev_vlan_replay_one() helper.
Without this change any VLANs installed on non-offloaded bridged bond
devices will remain only in 8021q filters without the needed migration.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
br_switchdev_vlan_replay() does nothing meaningful when
CONFIG_BRIDGE_VLAN_FILTERING is disabled. It gets by, because
br_vlan_group(), nbp_vlan_group() and co. have shim definitions, and the
code falls through when VLAN filtering is compiled out.
In a future patch, we will want to dereference br->vlan_proto, which is
only available under CONFIG_BRIDGE_VLAN_FILTERING. We could add an
accessor for that (but we'd have to touch all code that dereferences
it), or we could just make the entire body of br_switchdev_vlan_replay()
be conditionally compiled depending on CONFIG_BRIDGE_VLAN_FILTERING.
It is more convenient to opt for the latter.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
