MIRRORS/linux-imx
1
0
Fork 0
mirror of https://github.com/nxp-imx/linux-imx.git synced 2026-01-07 10:16:22 +01:00
Code Issues Actions Packages Projects Releases Wiki Activity
bb7aeae3d6
linux-imx/firmware/Makefile
Masahiro Yamada a4954fd772 kbuild: remove obj-n and lib-n handling 
Kconfig never defines CONFIG_* as 'n'.
Now obj-n is only used in firmware/Makefile and it can be
replaced with obj-.  No makefile uses lib-n.

Let's rip off obj-n and lib-n.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Peter Foley <pefoley2@pefoley.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-10-02 13:55:02 +02:00

11 KiB
Raw Blame History

kbuild file for firmware/

Create $(fwabs) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a

leading /, it's relative to $(srctree).

fwdir := $(subst $(quote),,$(CONFIG_EXTRA_FIRMWARE_DIR)) fwabs := $(addprefix $(srctree)/,$(filter-out /%,$(fwdir)))$(filter /%,$(fwdir))

fw-external-y := $(subst $(quote),,$(CONFIG_EXTRA_FIRMWARE))

There are three cases to care about:

1. Building kernel with CONFIG_FIRMWARE_IN_KERNEL=y -- $(fw-shipped-y) should

include the firmware files to include, according to .config

2. 'make modules_install', which will install firmware for modules, and

also for the in-kernel drivers when CONFIG_FIRMWARE_IN_KERNEL=n

3. 'make firmware_install', which installs all firmware, unconditionally.

For the former two cases we want $(fw-shipped-y) and $(fw-shipped-m) to be

accurate. In the latter case it doesn't matter -- it'll use $(fw-shipped-all).

But be aware that the config file might not be included at all.

ifdef CONFIG_ACENIC_OMIT_TIGON_I acenic-objs := acenic/tg2.bin fw-shipped- += acenic/tg1.bin else acenic-objs := acenic/tg1.bin acenic/tg2.bin endif fw-shipped-$(CONFIG_ACENIC) += $(acenic-objs) fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin
adaptec/starfire_tx.bin fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw fw-shipped-$(CONFIG_BNX2X) += bnx2x/bnx2x-e1-6.2.9.0.fw
bnx2x/bnx2x-e1h-6.2.9.0.fw
bnx2x/bnx2x-e2-6.2.9.0.fw fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-6.2.1a.fw
bnx2/bnx2-rv2p-09-6.0.17.fw
bnx2/bnx2-rv2p-09ax-6.0.17.fw
bnx2/bnx2-mips-06-6.2.1.fw
bnx2/bnx2-rv2p-06-6.0.15.fw fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin
cxgb3/t3c_psram-1.1.0.bin
cxgb3/ael2005_opt_edc.bin
cxgb3/ael2005_twx_edc.bin
cxgb3/ael2020_twx_edc.bin fw-shipped-$(CONFIG_DRM_MGA) += matrox/g200_warp.fw matrox/g400_warp.fw fw-shipped-$(CONFIG_DRM_R128) += r128/r128_cce.bin fw-shipped-$(CONFIG_DRM_RADEON) += radeon/R100_cp.bin radeon/R200_cp.bin
radeon/R300_cp.bin radeon/R420_cp.bin
radeon/RS690_cp.bin radeon/RS600_cp.bin
radeon/R520_cp.bin
radeon/R600_pfp.bin radeon/R600_me.bin
radeon/RV610_pfp.bin radeon/RV610_me.bin
radeon/RV630_pfp.bin radeon/RV630_me.bin
radeon/RV620_pfp.bin radeon/RV620_me.bin
radeon/RV635_pfp.bin radeon/RV635_me.bin
radeon/RV670_pfp.bin radeon/RV670_me.bin
radeon/RS780_pfp.bin radeon/RS780_me.bin
radeon/RV770_pfp.bin radeon/RV770_me.bin
radeon/RV730_pfp.bin radeon/RV730_me.bin
radeon/RV710_pfp.bin radeon/RV710_me.bin fw-shipped-$(CONFIG_DVB_AV7110) += av7110/bootcode.bin fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin
e100/d102e_ucode.bin fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis cis/PCMLM28.cis
cis/DP83903.cis cis/NE2K.cis
cis/tamarack.cis cis/PE-200.cis
cis/PE520.cis fw-shipped-$(CONFIG_PCMCIA_3C589) += cis/3CXEM556.cis fw-shipped-$(CONFIG_PCMCIA_3C574) += cis/3CCFEM556.cis fw-shipped-$(CONFIG_SERIAL_8250_CS) += cis/MT5634ZLX.cis cis/RS-COM-2P.cis
cis/COMpad2.cis cis/COMpad4.cis
cis/SW_555_SER.cis cis/SW_7xx_SER.cis
cis/SW_8xx_SER.cis fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin
advansys/3550.bin advansys/38C0800.bin fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin
qlogic/12160.bin fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin fw-shipped-$(CONFIG_INFINIBAND_QIB) += qlogic/sd7220.fw fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw
ess/maestro3_assp_minisrc.fw fw-shipped-$(CONFIG_SND_SB16_CSP) += sb16/mulaw_main.csp sb16/alaw_main.csp
sb16/ima_adpcm_init.csp
sb16/ima_adpcm_playback.csp
sb16/ima_adpcm_capture.csp fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw
yamaha/ds1e_ctrl.fw fw-shipped-$(CONFIG_SND_WAVEFRONT) += yamaha/yss225_registers.bin fw-shipped-$(CONFIG_TEHUTI) += tehuti/bdx.bin fw-shipped-$(CONFIG_TIGON3) += tigon/tg3.bin tigon/tg3_tso.bin
tigon/tg3_tso5.bin fw-shipped-$(CONFIG_TYPHOON) += 3com/typhoon.bin fw-shipped-$(CONFIG_USB_EMI26) += emi26/loader.fw emi26/firmware.fw
emi26/bitstream.fw fw-shipped-$(CONFIG_USB_EMI62) += emi62/loader.fw emi62/bitstream.fw
emi62/spdif.fw emi62/midi.fw fw-shipped-$(CONFIG_USB_KAWETH) += kaweth/new_code.bin kaweth/trigger_code.bin
kaweth/new_code_fix.bin
kaweth/trigger_code_fix.bin ifdef CONFIG_FIRMWARE_IN_KERNEL fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_MPR) += keyspan/mpr.fw fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA18X) += keyspan/usa18x.fw fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19) += keyspan/usa19.fw fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QI) += keyspan/usa19qi.fw fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QW) += keyspan/usa19qw.fw fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19W) += keyspan/usa19w.fw fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28) += keyspan/usa28.fw fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XA) += keyspan/usa28xa.fw fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XB) += keyspan/usa28xb.fw fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28X) += keyspan/usa28x.fw fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49W) += keyspan/usa49w.fw fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49WLC) += keyspan/usa49wlc.fw else fw-shipped- += keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw
keyspan/usa19qi.fw keyspan/usa19qw.fw keyspan/usa19w.fw
keyspan/usa28.fw keyspan/usa28xa.fw keyspan/usa28xb.fw
keyspan/usa28x.fw keyspan/usa49w.fw keyspan/usa49wlc.fw endif fw-shipped-$(CONFIG_USB_SERIAL_TI) += ti_3410.fw ti_5052.fw
mts_cdma.fw mts_gsm.fw mts_edge.fw fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT) += edgeport/boot.fw edgeport/boot2.fw
edgeport/down.fw edgeport/down2.fw fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += edgeport/down3.bin fw-shipped-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat_loader.fw whiteheat.fw
# whiteheat_loader_debug.fw fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin

fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)

quiet_cmd_ihex = IHEX $@ cmd_ihex = $(OBJCOPY) -Iihex -Obinary $< $@

quiet_cmd_ihex2fw = IHEX2FW $@ cmd_ihex2fw = $(objtree)/$(obj)/ihex2fw $< $@

quiet_cmd_h16tofw = H16TOFW $@ cmd_h16tofw = $(objtree)/$(obj)/ihex2fw -w $< $@

quiet_cmd_fwbin = MK_FW $@ cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)";
FWSTR="$(subst /,,$(subst .,,$(subst -,_,$(patsubst
firmware/%.gen.S,%,$@))))";
ASM_WORD=$(if $(CONFIG_64BIT),.quad,.long);
ASM_ALIGN=$(if $(CONFIG_64BIT),3,2);
PROGBITS=$(if $(CONFIG_ARM),%,@)progbits;
echo "/* Generated by firmware/Makefile */" > $@;
echo " .section .rodata" >>$@;
echo " .p2align $${ASM_ALIGN}" >>$@;
echo "fw$${FWSTR}_bin:" >>$@;
echo " .incbin "$(2)"" >>$@;
echo "_fw_end:" >>$@;
echo " .section .rodata.str,"aMS",$${PROGBITS},1" >>$@;
echo " .p2align $${ASM_ALIGN}" >>$@;
echo "fw$${FWSTR}_name:" >>$@;
echo " .string "$$FWNAME"" >>$@;
echo " .section .builtin_fw,"a",$${PROGBITS}" >>$@;
echo " .p2align $${ASM_ALIGN}" >>$@;
echo " $${ASM_WORD} fw$${FWSTR}_name" >>$@;
echo " $${ASM_WORD} fw$${FWSTR}_bin" >>$@;
echo " $${ASM_WORD} _fw_end - fw$${FWSTR}_bin" >>$@;

One of these files will change, or come into existence, whenever

the configuration changes between 32-bit and 64-bit. The .S files

need to change when that happens.

wordsize_deps := $(wildcard include/config/64bit.h include/config/32bit.h
include/config/ppc32.h include/config/ppc64.h
include/config/superh32.h include/config/superh64.h
include/config/x86_32.h include/config/x86_64.h)

$(patsubst %,$(obj)/%.gen.S, $(fw-shipped-y)): %: $(wordsize_deps) $(call cmd,fwbin,$(patsubst %.gen.S,%,$@)) $(patsubst %,$(obj)/%.gen.S, $(fw-external-y)): %: $(wordsize_deps)
include/config/extra/firmware/dir.h $(call cmd,fwbin,$(fwabs)/$(patsubst $(obj)/%.gen.S,%,$@))

The .o files depend on the binaries directly; the .S files don't.

$(patsubst %,$(obj)/%.gen.o, $(fw-shipped-y)): %.gen.o: % $(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/%

.ihex is used just as a simple way to hold binary files in a source tree

where binaries are frowned upon. They are directly converted with objcopy.

$(obj)/%: $(obj)/%.ihex $(call cmd,ihex)

Don't depend on ihex2fw if we're installing and it already exists.

Putting it after | in the dependencies doesn't seem sufficient when

we're installing after a cross-compile, because ihex2fw has dependencies

on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and

thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree

is exported read-only for someone to run 'make install'.

ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw) ihex2fw_dep := else ihex2fw_dep := $(obj)/ihex2fw endif

.HEX is also Intel HEX, but where the offset and length in each record

is actually meaningful, because the firmware has to be loaded in a certain

order rather than as a single binary blob. Thus, we convert them into our

more compact binary representation of ihex records (<linux/ihex.h>)

$(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) $(call cmd,ihex2fw)

.H16 is our own modified form of Intel HEX, with 16-bit length for records.

$(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) $(call cmd,h16tofw)

obj-y += $(patsubst %,%.gen.o, $(fw-external-y)) obj-$(CONFIG_FIRMWARE_IN_KERNEL) += $(patsubst %,%.gen.o, $(fw-shipped-y))

ifeq ($(KBUILD_SRC),)

Makefile.build only creates subdirectories for O= builds, but external

firmware might live outside the kernel source tree

_dummy := $(foreach d,$(addprefix $(obj)/,$(dir $(fw-external-y))), $(shell [ -d $(d) ] || mkdir -p $(d))) endif

Remove .S files and binaries created from ihex

(during 'make clean' .config isn't included so they're all in $(fw-shipped-))

targets := $(fw-shipped-) $(patsubst $(obj)/%,%,
$(shell find $(obj) -name *.gen.S 2>/dev/null))

Without this, built-in.o won't be created when it's empty, and the

final vmlinux link will fail.

obj- := dummy

hostprogs-y := ihex2fw