In 08a7d25255 ("tools arch x86: Sync the msr-index.h copy with the
kernel sources"), VMX_BASIC_MEM_TYPE_WB was removed. Use X86_MEMTYPE_WB
instead.
Fixes: 08a7d25255 ("tools arch x86: Sync the msr-index.h copy with the
kernel sources")
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Message-ID: <20241106034031.503291-1-jsperbeck@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM selftests changes for 6.12:
- Fix a goof that caused some Hyper-V tests to be skipped when run on bare
metal, i.e. NOT in a VM.
- Add a regression test for KVM's handling of SHUTDOWN for an SEV-ES guest.
- Explicitly include one-off assets in .gitignore. Past Sean was completely
wrong about not being able to detect missing .gitignore entries.
- Verify userspace single-stepping works when KVM happens to handle a VM-Exit
in its fastpath.
- Misc cleanups
KVM x86 misc changes for 6.12
- Advertise AVX10.1 to userspace (effectively prep work for the "real" AVX10
functionality that is on the horizon).
- Rework common MSR handling code to suppress errors on userspace accesses to
unsupported-but-advertised MSRs. This will allow removing (almost?) all of
KVM's exemptions for userspace access to MSRs that shouldn't exist based on
the vCPU model (the actual cleanup is non-trivial future work).
- Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC) splits the
64-bit value into the legacy ICR and ICR2 storage, whereas Intel (APICv)
stores the entire 64-bit value a the ICR offset.
- Fix a bug where KVM would fail to exit to userspace if one was triggered by
a fastpath exit handler.
- Add fastpath handling of HLT VM-Exit to expedite re-entering the guest when
there's already a pending wake event at the time of the exit.
- Finally fix the RSM vs. nested VM-Enter WARN by forcing the vCPU out of
guest mode prior to signalling SHUTDOWN (architecturally, the SHUTDOWN is
supposed to hit L1, not L2).
Break up the asm instructions poking daifclr and daifset to handle
interrupts. R_RBZYL specifies pending interrupts will be handle after
context synchronization events such as an ISB.
Introduce a function wrapper for the WFI instruction.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Link: https://lore.kernel.org/r/20240823175836.2798235-2-coltonlewis@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Unlink memory regions when freeing a VM, even though it's not strictly
necessary since all tracking structures are freed soon after. The time
spent deleting entries is negligible, and not unlinking entries is
confusing, e.g. it's easy to overlook that the tree structures are
freed by the caller.
Link: https://lore.kernel.org/r/20240802201429.338412-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Remove sefltests' kvm_memcmp_hva_gva(), which has literally never had a
single user since it was introduced by commit 783e9e5126 ("kvm:
selftests: add API testing infrastructure").
Link: https://lore.kernel.org/r/20240802200853.336512-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that selftests support printf() in the guest, report unexpected
exceptions via the regular assertion framework. Exceptions were special
cased purely to provide a better error message. Convert only x86 for now,
as it's low-hanging fruit (already formats the assertion in the guest),
and converting x86 will allow adding asserts in x86 library code without
needing to update multiple tests.
Once all other architectures are converted, this will allow moving the
reporting to common code, which will in turn allow adding asserts in
common library code, and will also allow removing UCALL_UNHANDLED.
Link: https://lore.kernel.org/r/20240719235107.3023592-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM_CAP_HYPERV_DIRECT_TLBFLUSH is only reported when KVM runs on top of
Hyper-V and hyperv_evmcs/hyperv_svm_test don't need that, these tests check
that the feature is properly emulated for Hyper-V on KVM guests. There's no
corresponding CAP for that, the feature is reported in
KVM_GET_SUPPORTED_HV_CPUID.
Hyper-V specific CPUIDs are not reported by KVM_GET_SUPPORTED_CPUID,
implement dedicated kvm_hv_cpu_has() helper to do the job.
Fixes: 6dac119518 ("KVM: selftests: Make Hyper-V tests explicitly require KVM Hyper-V support")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240816130139.286246-3-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Since there is 'hyperv.c' for Hyper-V specific functions already, move
Hyper-V specific functions out of processor.c there.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240816130139.286246-2-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Multiple test cases need page size and shift definitions.
By moving the definitions to a single architecture specific header we
limit the repetition.
Make use of PAGE_SIZE, PAGE_SHIFT and PAGE_MASK defines in existing
code.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240807154512.316936-2-schlameuss@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20240807154512.316936-2-schlameuss@linux.ibm.com>
- Remove dead code in the memslot modification stress test.
- Treat "branch instructions retired" as supported on all AMD Family 17h+ CPUs.
- Print the guest pseudo-RNG seed only when it changes, to avoid spamming the
log for tests that create lots of VMs.
- Make the PMU counters test less flaky when counting LLC cache misses by
doing CLFLUSH{OPT} in every loop iteration.
-----BEGIN PGP SIGNATURE-----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=zg8U
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests-6.11' of https://github.com/kvm-x86/linux into HEAD
KVM selftests for 6.11
- Remove dead code in the memslot modification stress test.
- Treat "branch instructions retired" as supported on all AMD Family 17h+ CPUs.
- Print the guest pseudo-RNG seed only when it changes, to avoid spamming the
log for tests that create lots of VMs.
- Make the PMU counters test less flaky when counting LLC cache misses by
doing CLFLUSH{OPT} in every loop iteration.
- Add a global struct to consolidate tracking of host values, e.g. EFER, and
move "shadow_phys_bits" into the structure as "maxphyaddr".
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC
bus frequency, because TDX.
- Print the name of the APICv/AVIC inhibits in the relevant tracepoint.
- Clean up KVM's handling of vendor specific emulation to consistently act on
"compatible with Intel/AMD", versus checking for a specific vendor.
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=Cf2R
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.11' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.11
- Add a global struct to consolidate tracking of host values, e.g. EFER, and
move "shadow_phys_bits" into the structure as "maxphyaddr".
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC
bus frequency, because TDX.
- Print the name of the APICv/AVIC inhibits in the relevant tracepoint.
- Clean up KVM's handling of vendor specific emulation to consistently act on
"compatible with Intel/AMD", versus checking for a specific vendor.
- Misc cleanups
Add udelay() for x86 tests to allow busy waiting in the guest for a
specific duration, and to match ARM and RISC-V's udelay() in the hopes
of eventually making udelay() available on all architectures.
Get the guest's TSC frequency using KVM_GET_TSC_KHZ and expose it to all
VMs via a new global, guest_tsc_khz. Assert that KVM_GET_TSC_KHZ returns
a valid frequency, instead of simply skipping tests, which would require
detecting which tests actually need/want udelay(). KVM hasn't returned an
error for KVM_GET_TSC_KHZ since commit cc578287e3 ("KVM: Infrastructure
for software and hardware based TSC rate scaling"), which predates KVM
selftests by 6+ years (KVM_GET_TSC_KHZ itself predates KVM selftest by 7+
years).
Note, if the GUEST_ASSERT() in udelay() somehow fires and the test doesn't
check for guest asserts, then the test will fail with a very cryptic
message. But fixing that, e.g. by automatically handling guest asserts,
is a much larger task, and practically speaking the odds of a test afoul
of this wart are infinitesimally small.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/5aa86285d1c1d7fe1960e3fe490f4b22273977e6.1718214999.git.reinette.chatre@intel.com
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Print the guest's random seed during VM creation if and only if the seed
has changed since the seed was last printed. The vast majority of tests,
if not all tests at this point, set the seed during test initialization
and never change the seed, i.e. printing it every time a VM is created is
useless noise.
Snapshot and print the seed during early selftest init to play nice with
tests that use the kselftests harness, at the cost of printing an unused
seed for tests that change the seed during test-specific initialization,
e.g. dirty_log_perf_test. The kselftests harness runs each testcase in a
separate process that is forked from the original process before creating
each testcase's VM, i.e. waiting until first VM creation will result in
the seed being printed by each testcase despite it never changing. And
long term, the hope/goal is that setting the seed will be handled by the
core framework, i.e. that the dirty_log_perf_test wart will naturally go
away.
Reported-by: Yi Lai <yi1.lai@intel.com>
Reported-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240627021756.144815-2-dapeng1.mi@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Due to commit 2b7deea3ec ("Revert "kvm: selftests: move base
kvm_util.h declarations to kvm_util_base.h"") kvm selftests now
requires explicitly including ucall_common.h when needed. The commit
added the directives everywhere they were needed at the time, but, by
merge time, new places had been merged for RISC-V. Add those now to
fix RISC-V's compilation.
Fixes: dee7ea42a1 ("Merge tag 'kvm-x86-selftests_utils-6.10' of https://github.com/kvm-x86/linux into HEAD")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240603122045.323064-2-ajones@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Use the max mappable GPA via GuestPhysBits advertised by KVM to calculate
max_gfn. Currently some selftests (e.g. access_tracking_perf_test,
dirty_log_test...) add RAM regions close to max_gfn, so guest may access
GPA beyond its mappable range and cause infinite loop.
Adjust max_gfn in vm_compute_max_gfn() since x86 selftests already
overrides vm_compute_max_gfn() specifically to deal with goofy edge cases.
Reported-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Tested-by: Yi Lai <yi1.lai@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20240513014003.104593-1-tao1.su@linux.intel.com
[sean: tweak name, add comment and sanity check]
Signed-off-by: Sean Christopherson <seanjc@google.com>
- Define _GNU_SOURCE for all selftests to fix a warning that was introduced by
a change to kselftest_harness.h late in the 6.9 cycle, and because forcing
every test to #define _GNU_SOURCE is painful.
- Provide a global psuedo-RNG instance for all tests, so that library code can
generate random, but determinstic numbers.
- Use the global pRNG to randomly force emulation of select writes from guest
code on x86, e.g. to help validate KVM's emulation of locked accesses.
- Rename kvm_util_base.h back to kvm_util.h, as the weird layer of indirection
was added purely to avoid manually #including ucall_common.h in a handful of
locations.
- Allocate and initialize x86's GDT, IDT, TSS, segments, and default exception
handlers at VM creation, instead of forcing tests to manually trigger the
related setup.
-----BEGIN PGP SIGNATURE-----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=vsRz
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests_utils-6.10' of https://github.com/kvm-x86/linux into HEAD
KVM selftests treewide updates for 6.10:
- Define _GNU_SOURCE for all selftests to fix a warning that was introduced by
a change to kselftest_harness.h late in the 6.9 cycle, and because forcing
every test to #define _GNU_SOURCE is painful.
- Provide a global psuedo-RNG instance for all tests, so that library code can
generate random, but determinstic numbers.
- Use the global pRNG to randomly force emulation of select writes from guest
code on x86, e.g. to help validate KVM's emulation of locked accesses.
- Rename kvm_util_base.h back to kvm_util.h, as the weird layer of indirection
was added purely to avoid manually #including ucall_common.h in a handful of
locations.
- Allocate and initialize x86's GDT, IDT, TSS, segments, and default exception
handlers at VM creation, instead of forcing tests to manually trigger the
related setup.
- Enhance the demand paging test to allow for better reporting and stressing
of UFFD performance.
- Convert the steal time test to generate TAP-friendly output.
- Fix a flaky false positive in the xen_shinfo_test due to comparing elapsed
time across two different clock domains.
- Skip the MONITOR/MWAIT test if the host doesn't actually support MWAIT.
- Avoid unnecessary use of "sudo" in the NX hugepage test to play nice with
running in a minimal userspace environment.
- Allow skipping the RSEQ test's sanity check that the vCPU was able to
complete a reasonable number of KVM_RUNs, as the assert can fail on a
completely valid setup. If the test is run on a large-ish system that is
otherwise idle, and the test isn't affined to a low-ish number of CPUs, the
vCPU task can be repeatedly migrated to CPUs that are in deep sleep states,
which results in the vCPU having very little net runtime before the next
migration due to high wakeup latencies.
-----BEGIN PGP SIGNATURE-----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=wAt8
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests-6.10' of https://github.com/kvm-x86/linux into HEAD
KVM selftests cleanups and fixes for 6.10:
- Enhance the demand paging test to allow for better reporting and stressing
of UFFD performance.
- Convert the steal time test to generate TAP-friendly output.
- Fix a flaky false positive in the xen_shinfo_test due to comparing elapsed
time across two different clock domains.
- Skip the MONITOR/MWAIT test if the host doesn't actually support MWAIT.
- Avoid unnecessary use of "sudo" in the NX hugepage test to play nice with
running in a minimal userspace environment.
- Allow skipping the RSEQ test's sanity check that the vCPU was able to
complete a reasonable number of KVM_RUNs, as the assert can fail on a
completely valid setup. If the test is run on a large-ish system that is
otherwise idle, and the test isn't affined to a low-ish number of CPUs, the
vCPU task can be repeatedly migrated to CPUs that are in deep sleep states,
which results in the vCPU having very little net runtime before the next
migration due to high wakeup latencies.
- Move a lot of state that was previously stored on a per vcpu
basis into a per-CPU area, because it is only pertinent to the
host while the vcpu is loaded. This results in better state
tracking, and a smaller vcpu structure.
- Add full handling of the ERET/ERETAA/ERETAB instructions in
nested virtualisation. The last two instructions also require
emulating part of the pointer authentication extension.
As a result, the trap handling of pointer authentication has
been greattly simplified.
- Turn the global (and not very scalable) LPI translation cache
into a per-ITS, scalable cache, making non directly injected
LPIs much cheaper to make visible to the vcpu.
- A batch of pKVM patches, mostly fixes and cleanups, as the
upstreaming process seems to be resuming. Fingers crossed!
- Allocate PPIs and SGIs outside of the vcpu structure, allowing
for smaller EL2 mapping and some flexibility in implementing
more or less than 32 private IRQs.
- Purge stale mpidr_data if a vcpu is created after the MPIDR
map has been created.
- Preserve vcpu-specific ID registers across a vcpu reset.
- Various minor cleanups and improvements.
-----BEGIN PGP SIGNATURE-----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=CEfD
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 6.10
- Move a lot of state that was previously stored on a per vcpu
basis into a per-CPU area, because it is only pertinent to the
host while the vcpu is loaded. This results in better state
tracking, and a smaller vcpu structure.
- Add full handling of the ERET/ERETAA/ERETAB instructions in
nested virtualisation. The last two instructions also require
emulating part of the pointer authentication extension.
As a result, the trap handling of pointer authentication has
been greattly simplified.
- Turn the global (and not very scalable) LPI translation cache
into a per-ITS, scalable cache, making non directly injected
LPIs much cheaper to make visible to the vcpu.
- A batch of pKVM patches, mostly fixes and cleanups, as the
upstreaming process seems to be resuming. Fingers crossed!
- Allocate PPIs and SGIs outside of the vcpu structure, allowing
for smaller EL2 mapping and some flexibility in implementing
more or less than 32 private IRQs.
- Purge stale mpidr_data if a vcpu is created after the MPIDR
map has been created.
- Preserve vcpu-specific ID registers across a vcpu reset.
- Various minor cleanups and improvements.
Explicitly require KVM_CAP_USER_MEMORY2 for selftests that create memslots,
i.e. skip selftests that need memslots instead of letting them fail on
KVM_SET_USER_MEMORY_REGION2. While it's ok to take a dependency on new
kernel features, selftests should skip gracefully instead of failing hard
when run on older kernels.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/69ae0694-8ca3-402c-b864-99b500b24f5d@moroto.mountain
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240430162133.337541-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop the @selector from the kernel code, data, and TSS builders and
instead hardcode the respective selector in the helper. Accepting a
selector but not a base makes the selector useless, e.g. the data helper
can't create per-vCPU for FS or GS, and so loading GS with KERNEL_DS is
the only logical choice.
And for code and TSS, there is no known reason to ever want multiple
segments, e.g. there are zero plans to support 32-bit kernel code (and
again, that would require more than just the selector).
If KVM selftests ever do add support for per-vCPU segments, it'd arguably
be more readable to add a dedicated helper for building/setting the
per-vCPU segment, and move the common data segment code to an inner
helper.
Lastly, hardcoding the selector reduces the probability of setting the
wrong selector in the vCPU versus what was created by the VM in the GDT.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-19-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Initialize x86's various segments in the GDT during creation of relevant
VMs instead of waiting until vCPUs come along. Re-installing the segments
for every vCPU is both wasteful and confusing, as is installing KERNEL_DS
multiple times; NOT installing KERNEL_DS for GS is icing on the cake.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-18-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a proper #define for the TSS selector instead of open coding 0x18 and
hoping future developers don't use that selector for something else.
Opportunistically rename the code and data selector macros to shorten the
names, align the naming with the kernel's scheme, and capture that they
are *kernel* segments.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-17-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Allocate x86's per-VM TSS at creation of a non-barebones VM. Like the
GDT, the TSS is needed to actually run vCPUs, i.e. every non-barebones VM
is all but guaranteed to allocate the TSS sooner or later.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that the per-VM, on-demand allocation logic in kvm_setup_gdt() and
vcpu_init_descriptor_tables() is gone, fold them into vcpu_init_sregs().
Note, both kvm_setup_gdt() and vcpu_init_descriptor_tables() configured the
GDT, which is why it looks like kvm_setup_gdt() disappears.
Opportunistically delete the pointless zeroing of the IDT limit (it was
being unconditionally overwritten by vcpu_init_descriptor_tables()).
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Replace the switch statement on vm->mode in x86's vcpu_init_sregs()'s with
a simple assert that the VM has a 48-bit virtual address space. A switch
statement is both overkill and misleading, as the existing code incorrectly
implies that VMs with LA57 would need different to configuration for the
LDT, TSS, and flat segments. In all likelihood, the only difference that
would be needed for selftests is CR4.LA57 itself.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Allocate the GDT during creation of non-barebones VMs instead of waiting
until the first vCPU is created, as the whole point of non-barebones VMs
is to be able to run vCPUs, i.e. the GDT is going to get allocated no
matter what.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Map x86's exception handlers at VM creation, not vCPU setup, as the
mapping is per-VM, i.e. doesn't need to be (re)done for every vCPU.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Initialize the IDT and exception handlers for all non-barebones VMs and
vCPUs on x86. Forcing tests to manually configure the IDT just to save
8KiB of memory is a terrible tradeoff, and also leads to weird tests
(multiple tests have deliberately relied on shutdown to indicate success),
and hard-to-debug failures, e.g. instead of a precise unexpected exception
failure, tests see only shutdown.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rename vcpu_setup() to be more descriptive and precise, there is a whole
lot of "setup" that is done for a vCPU that isn't in said helper.
No functional change intended.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move x86's various descriptor table helpers in processor.c up above
kvm_arch_vm_post_create() and vcpu_setup() so that the helpers can be
made static and invoked from the aforementioned functions.
No functional change intended.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fix an off-by-one bug in the initialization of the GDT limit, which as
defined in the SDM is inclusive, not exclusive.
Note, vcpu_init_descriptor_tables() gets the limit correct, it's only
vcpu_setup() that is broken, i.e. only tests that _don't_ invoke
vcpu_init_descriptor_tables() can have problems. And the fact that KVM
effectively initializes the GDT twice will be cleaned up in the near
future.
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
[sean: rewrite changelog]
Link: https://lore.kernel.org/r/20240314232637.2538648-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that kvm_vm_arch exists, move the GDT, IDT, and TSS fields to x86's
implementation, as the structures are firmly x86-only.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Effectively revert the movement of code from kvm_util.h => kvm_util_base.h,
as the TL;DR of the justification for the move was to avoid #idefs and/or
circular dependencies between what ended up being ucall_common.h and what
was (and now again, is), kvm_util.h.
But avoiding #ifdef and circular includes is trivial: don't do that. The
cost of removing kvm_util_base.h is a few extra includes of ucall_common.h,
but that cost is practically nothing. On the other hand, having a "base"
version of a header that is really just the header itself is confusing,
and makes it weird/hard to choose names for headers that actually are
"base" headers, e.g. to hold core KVM selftests typedefs.
For all intents and purposes, this reverts commit
7d9a662ed9.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a global snapshot of kvm_is_forced_emulation_enabled() and sync it to
all VMs by default so that core library code can force emulation, e.g. to
allow for easier testing of the intersections between emulation and other
features in KVM.
Link: https://lore.kernel.org/r/20240314185459.2439072-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move memstress' random bool logic into common code to avoid reinventing
the wheel for basic yes/no decisions. Provide an outer wrapper to handle
the basic/common case of just wanting a 50/50 chance of something
happening.
Link: https://lore.kernel.org/r/20240314185459.2439072-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a global guest_random_state instance, i.e. a pseudo-RNG, so that an
RNG is available for *all* tests. This will allow randomizing behavior
in core library code, e.g. x86 will utilize the pRNG to conditionally
force emulation of writes from within common guest code.
To allow for deterministic runs, and to be compatible with existing tests,
allow tests to override the seed used to initialize the pRNG.
Note, the seed *must* be overwritten before a VM is created in order for
the seed to take effect, though it's perfectly fine for a test to
initialize multiple VMs with different seeds.
And as evidenced by memstress_guest_code(), it's also a-ok to instantiate
more RNGs using the global seed (or a modified version of it). The goal
of the global RNG is purely to ensure that _a_ source of random numbers is
available, it doesn't have to be the _only_ RNG.
Link: https://lore.kernel.org/r/20240314185459.2439072-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Define _GNU_SOURCE is the base CFLAGS instead of relying on selftests to
manually #define _GNU_SOURCE, which is repetitive and error prone. E.g.
kselftest_harness.h requires _GNU_SOURCE for asprintf(), but if a selftest
includes kvm_test_harness.h after stdio.h, the include guards result in
the effective version of stdio.h consumed by kvm_test_harness.h not
defining asprintf():
In file included from x86_64/fix_hypercall_test.c:12:
In file included from include/kvm_test_harness.h:11:
../kselftest_harness.h:1169:2: error: call to undeclared function
'asprintf'; ISO C99 and later do not support implicit function declarations
[-Wimplicit-function-declaration]
1169 | asprintf(&test_name, "%s%s%s.%s", f->name,
| ^
When including the rseq selftest's "library" code, #undef _GNU_SOURCE so
that rseq.c controls whether or not it wants to build with _GNU_SOURCE.
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240423190308.2883084-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Verify PMU snapshot functionality by setting up the shared memory
correctly and reading the counter values from the shared memory
instead of the CSR.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-23-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The selftests GIC library presently does not support LPIs. Add a
userspace helper for configuring a redistributor for LPIs, installing
an LPI configuration table and LPI pending table.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-18-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
A prerequisite of testing LPI injection performance is of course
instantiating an ITS for the guest. Add a small library for creating an
ITS and interacting with it from the guest.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-17-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
It would appear that all of the selftests are using the same exact
layout for the GIC frames. Fold this back into the library
implementation to avoid defining magic values all over the selftests.
This is an extension of Colton's change, ripping out parameterization of
from the library internals in addition to the public interfaces.
Co-developed-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-15-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
There are a few subtle incongruencies between the GIC definitions used
by the kernel and selftests. Furthermore, the selftests header blends
implementation detail (e.g. default priority) with the architectural
definitions.
This is all rather annoying, since bulk imports of the kernel header
is not possible. Move selftests-specific definitions out of the
offending header and realign tests on the canonical definitions for
things like sysregs. Finally, haul in a fresh copy of the gicv3 header
to enable a forthcoming ITS selftest.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-14-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
Allow the caller to set the initial state of the VM. Doing this
before sev_vm_launch() matters for SEV-ES, since that is the
place where the VMSA is updated and after which the guest state
becomes sealed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-17-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This removes the concept of "subtypes", instead letting the tests use proper
VM types that were recently added. While the sev_init_vm() and sev_es_init_vm()
are still able to operate with the legacy KVM_SEV_INIT and KVM_SEV_ES_INIT
ioctls, this is limited to VMs that are created manually with
vm_create_barebones().
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-16-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With multiple reader threads POLLing a single UFFD, the demand paging test
suffers from the thundering herd problem: performance degrades as the
number of reader threads is increased. Solve this issue [1] by switching
the the polling mechanism to EPOLL + EPOLLEXCLUSIVE.
Also, change the error-handling convention of uffd_handler_thread_fn.
Instead of just printing errors and returning early from the polling
loop, check for them via TEST_ASSERT(). "return NULL" is reserved for a
successful exit from uffd_handler_thread_fn, i.e. one triggered by a
write to the exit pipe.
Performance samples generated by the command in [2] are given below.
Num Reader Threads, Paging Rate (POLL), Paging Rate (EPOLL)
1 249k 185k
2 201k 235k
4 186k 155k
16 150k 217k
32 89k 198k
[1] Single-vCPU performance does suffer somewhat.
[2] ./demand_paging_test -u MINOR -s shmem -v 4 -o -r <num readers>
Signed-off-by: Anish Moorthy <amoorthy@google.com>
Acked-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20240215235405.368539-13-amoorthy@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
At the moment, demand_paging_test does not support profiling/testing
multiple vCPU threads concurrently faulting on a single uffd because
(a) "-u" (run test in userfaultfd mode) creates a uffd for each vCPU's
region, so that each uffd services a single vCPU thread.
(b) "-u -o" (userfaultfd mode + overlapped vCPU memory accesses)
simply doesn't work: the test tries to register the same memory
to multiple uffds, causing an error.
Add support for many vcpus per uffd by
(1) Keeping "-u" behavior unchanged.
(2) Making "-u -a" create a single uffd for all of guest memory.
(3) Making "-u -o" implicitly pass "-a", solving the problem in (b).
In cases (2) and (3) all vCPU threads fault on a single uffd.
With potentially multiple vCPUs per UFFD, it makes sense to allow
configuring the number of reader threads per UFFD as well: add the "-r"
flag to do so.
Signed-off-by: Anish Moorthy <amoorthy@google.com>
Acked-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20240215235405.368539-12-amoorthy@google.com
[sean: fix kernel style violations, use calloc() for arrays]
Signed-off-by: Sean Christopherson <seanjc@google.com>
