- Add missing error handling for syscore_suspend() to the hibernation
core code (Wentao Liang).
- Revert a commit that added unused macros (Andy Shevchenko).
- Synchronize the runtime PM status of devices that were runtime-
suspended before a system-wide suspend and need to be resumed during
the subsequent system-wide resume transition (Rafael Wysocki).
- Clean up the teo cpuidle governor and make the handling of short idle
intervals in it consistent regardless of the properties of idle
states supplied by the cpuidle driver (Rafael Wysocki).
- Fix some boost-related issues in cpufreq (Lifeng Zheng).
- Fix build issues in the s3c64xx and airoha cpufreq drivers (Viresh
Kumar).
- Remove unconditional binding of schedutil governor kthreads to the
affected CPUs if the cpufreq driver indicates that updates can happen
from any CPU (Christian Loehle).
-----BEGIN PGP SIGNATURE-----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=EgsM
-----END PGP SIGNATURE-----
Merge tag 'pm-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are mostly fixes on top of the previously merged power
management material with the addition of some teo cpuidle governor
updates, some of which may also be regarded as fixes:
- Add missing error handling for syscore_suspend() to the hibernation
core code (Wentao Liang)
- Revert a commit that added unused macros (Andy Shevchenko)
- Synchronize the runtime PM status of devices that were runtime-
suspended before a system-wide suspend and need to be resumed
during the subsequent system-wide resume transition (Rafael
Wysocki)
- Clean up the teo cpuidle governor and make the handling of short
idle intervals in it consistent regardless of the properties of
idle states supplied by the cpuidle driver (Rafael Wysocki)
- Fix some boost-related issues in cpufreq (Lifeng Zheng)
- Fix build issues in the s3c64xx and airoha cpufreq drivers (Viresh
Kumar)
- Remove unconditional binding of schedutil governor kthreads to the
affected CPUs if the cpufreq driver indicates that updates can
happen from any CPU (Christian Loehle)"
* tag 'pm-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: core: Synchronize runtime PM status of parents and children
cpufreq: airoha: Depends on OF
PM: Revert "Add EXPORT macros for exporting PM functions"
PM: hibernate: Add error handling for syscore_suspend()
cpufreq/schedutil: Only bind threads if needed
cpufreq: ACPI: Remove set_boost in acpi_cpufreq_cpu_init()
cpufreq: CPPC: Fix wrong max_freq in policy initialization
cpufreq: Introduce a more generic way to set default per-policy boost flag
cpufreq: Fix re-boost issue after hotplugging a CPU
cpufreq: s3c64xx: Fix compilation warning
cpuidle: teo: Skip sleep length computation for low latency constraints
cpuidle: teo: Replace time_span_ns with a flag
cpuidle: teo: Simplify handling of total events count
cpuidle: teo: Skip getting the sleep length if wakeups are very frequent
cpuidle: teo: Simplify counting events used for tick management
cpuidle: teo: Clarify two code comments
cpuidle: teo: Drop local variable prev_intercept_idx
cpuidle: teo: Combine candidate state index checks against 0
cpuidle: teo: Reorder candidate state index checks
cpuidle: teo: Rearrange idle state lookup code
- Add support for naming idlestates through DT
pmdomain providers:
- arm: Explicitly request the current state at init for the SCMI PM domain
- mediatek: Add Airoha CPU PM Domain support for CPU frequency scaling
- ti: Add per-device latency constraint management to the ti_sci PM domain
cpuidle-psci:
- Enable system-wakeup through GENPD_FLAG_ACTIVE_WAKEUP
-----BEGIN PGP SIGNATURE-----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=gGf+
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add support for naming idlestates through DT
pmdomain providers:
- arm: Explicitly request the current state at init for the SCMI PM
domain
- mediatek: Add Airoha CPU PM Domain support for CPU frequency
scaling
- ti: Add per-device latency constraint management to the ti_sci PM
domain
cpuidle-psci:
- Enable system-wakeup through GENPD_FLAG_ACTIVE_WAKEUP"
* tag 'pmdomain-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: airoha: Fix compilation error with Clang-20 and Thumb2 mode
pmdomain: arm: scmi_pm_domain: Send an explicit request to set the current state
pmdomain: airoha: Add Airoha CPU PM Domain support
pmdomain: ti_sci: handle wake IRQs for IO daisy chain wakeups
pmdomain: ti_sci: add wakeup constraint management
pmdomain: ti_sci: add per-device latency constraint management
pmdomain: imx-gpcv2: Suppress bind attrs
pmdomain: imx8m[p]-blk-ctrl: Suppress bind attrs
pmdomain: core: Support naming idle states
dt-bindings: power: domain-idle-state: Allow idle-state-name
cpuidle: psci: Activate GENPD_FLAG_ACTIVE_WAKEUP with OSI
If the idle state exit latency constraint is sufficiently low, it
is better to avoid the additional latency related to calling
tick_nohz_get_sleep_length(). It is also not necessary to compute
the sleep length in that case because shallow idle state selection
will be forced then regardless of the recent wakeup history.
Accordingly, skip the sleep length computation and subsequent
checks of the exit latency constraint is low enough.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/6122398.lOV4Wx5bFT@rjwysocki.net
After recent updates, the time_span_ns field in struct teo_cpu has
become an indicator on whether or not the most recent wakeup has been
"genuine" which may as well be indicated by a bool field without
calling local_clock(), so update the code accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/6010475.MhkbZ0Pkbq@rjwysocki.net
Instead of computing the total events count from scratch every time,
decay it and add a PULSE value to it in teo_update().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/9388883.CDJkKcVGEf@rjwysocki.net
Commit 6da8f9ba5a ("cpuidle: teo: Skip tick_nohz_get_sleep_length()
call in some cases") attempted to reduce the governor overhead in some
cases by making it avoid obtaining the sleep length (the time till the
next timer event) which may be costly.
Among other things, after the above commit, tick_nohz_get_sleep_length()
was not called any more when idle state 0 was to be returned, which
turned out to be problematic and the previous behavior in that respect
was restored by commit 4b20b07ce7 ("cpuidle: teo: Don't count non-
existent intercepts").
However, commit 6da8f9ba5a also caused the governor to avoid calling
tick_nohz_get_sleep_length() on systems where idle state 0 is a "polling"
one (that is, it is not really an idle state, but a loop continuously
executed by the CPU) when the target residency of the idle state to be
returned was low enough, so there was no practical need to refine the
idle state selection in any way. This change was not removed by the
other commit, so now on systems where idle state 0 is a "polling" one,
tick_nohz_get_sleep_length() is called when idle state 0 is to be
returned, but it is not called when a deeper idle state with
sufficiently low target residency is to be returned. That is arguably
confusing and inconsistent.
Moreover, there is no specific reason why the behavior in question
should depend on whether or not idle state 0 is a "polling" one.
One way to address this would be to make the governor always call
tick_nohz_get_sleep_length() to obtain the sleep length, but that would
effectively mean reverting commit 6da8f9ba5a and restoring the latency
issue that was the reason for doing it. This approach is thus not
particularly attractive.
To address it differently, notice that if a CPU is woken up very often,
this is not likely to be caused by timers in the first place (user space
has a default timer slack of 50 us and there are relatively few timers
with a deadline shorter than several microseconds in the kernel) and
even if it were the case, the potential benefit from using a deep idle
state would then be questionable for latency reasons. Therefore, if the
majority of CPU wakeups occur within several microseconds, it can be
assumed that all wakeups in that range are non-timer and the sleep
length need not be determined.
Accordingly, introduce a new metric for counting wakeups with the
measured idle duration below RESIDENCY_THRESHOLD_NS and modify the idle
state selection to skip the tick_nohz_get_sleep_length() invocation if
idle state 0 has been selected or the target residency of the candidate
idle state is below RESIDENCY_THRESHOLD_NS and the value of the new
metric is at least 1/2 of the total event count.
Since the above requires the measured idle duration to be determined
every time, except for the cases when one of the safety nets has
triggered in which the wakeup is counted as a hit in the deepest
idle state idle residency range, update the handling of those cases
to avoid skipping the idle duration computation when the CPU wakeup
is "genuine".
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3851791.kQq0lBPeGt@rjwysocki.net
Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
[ rjw: Renamed a struct field ]
[ rjw: Fixed typo in the subject and one in a comment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace the tick_hits metric with a new tick_intercepts one that can be
used directly when deciding whether or not to stop the scheduler tick
and update the governor functional description accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/1987985.PYKUYFuaPT@rjwysocki.net
Rewrite two code comments suposed to explain its behavior that are too
concise or not sufficiently clear.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/8472971.T7Z3S40VBb@rjwysocki.net
[ rjw: Fixed 2 typos in new comments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Local variable prev_intercept_idx in teo_select() is redundant because
it cannot be 0 when candidate state index is 0.
The prev_intercept_idx value is the index of the deepest enabled idle
state, so if it is 0, state 0 is the deepest enabled idle state, in
which case it must be the only enabled idle state, but then teo_select()
would have returned early before initializing prev_intercept_idx.
Thus prev_intercept_idx must be nonzero and the check of it against 0
always passes, so it can be dropped altogether.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/3327997.aeNJFYEL58@rjwysocki.net
[ rjw: Fixed typo in the changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are two candidate state index checks against 0 in teo_select()
that need not be separate, so combine them and update comments around
them.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/13676346.uLZWGnKmhe@rjwysocki.net
Since constraint_idx may be 0, the candidate state index may change to 0
after assigning constraint_idx to it, so first check if it is greater
than constraint_idx (and update it if so) and then check it against 0.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/1907276.tdWV9SEqCh@rjwysocki.net
Rearrange code in the idle state lookup loop in teo_select() to make it
somewhat easier to follow and update comments around it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/4619938.LvFx2qVVIh@rjwysocki.net
After previous changes, the description of the teo governor in the
documentation comment does not match the code any more, so update it
as appropriate.
Fixes: 4499143980 ("cpuidle: teo: Remove recent intercepts metric")
Fixes: 2662342079 ("cpuidle: teo: Gather statistics regarding whether or not to stop the tick")
Fixes: 6da8f9ba5a ("cpuidle: teo: Skip tick_nohz_get_sleep_length() call in some cases")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/6120335.lOV4Wx5bFT@rjwysocki.net
[ rjw: Corrected 3 typos found by Christian ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The 'np' device_node is initialized via of_cpu_device_node_get(), which
requires explicit calls to of_node_put() when it is no longer required
to avoid leaking the resource.
Instead of adding the missing calls to of_node_put() in all execution
paths, use the cleanup attribute for 'np' by means of the __free()
macro, which automatically calls of_node_put() when the variable goes
out of scope. Given that 'np' is only used within the
for_each_possible_cpu(), reduce its scope to release the nood after
every iteration of the loop.
Fixes: 6abf32f1d9 ("cpuidle: Add RISC-V SBI CPU idle driver")
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241116-cpuidle-riscv-sbi-cleanup-v3-1-a3a46372ce08@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Set GENPD_FLAG_ACTIVE_WAKEUP flag for domain psci cpuidle when OSI
is activated, then when a device is set as the wake-up source using
device_set_wakeup_path, the PSCI power domain could be retained to allow
so that the associated device can wake up the system.
With this flag, for S2IDLE system-wide suspend, the wake-up path is
managed in each device driver and is tested in the power framework:
a PSCI domain is only turned off when GENPD_FLAG_ACTIVE_WAKEUP is enabled
and the associated device is not in the wake-up path, so PSCI CPUIdle
selects the lowest level in the PSCI topology according to the wake-up
path.
This patch is a preliminary step to support PSCI OSI on the STM32MP25
platform with the D1 domain (power-domain-cluster) for the A35 cortex
cluster and for the associated peripherals including EXTI1 which manages
the wake-up interrupts for domain D1.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Message-ID: <20241119141827.1.I6129b16ec6b558efc1707861db87e55bf7022f62@changeid>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Support for pointer masking in userspace,
* Support for probing vector misaligned access performance.
* Support for qspinlock on systems with Zacas and Zabha.
-----BEGIN PGP SIGNATURE-----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=ND+J
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-v updates from Palmer Dabbelt:
- Support for pointer masking in userspace
- Support for probing vector misaligned access performance
- Support for qspinlock on systems with Zacas and Zabha
* tag 'riscv-for-linus-6.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits)
RISC-V: Remove unnecessary include from compat.h
riscv: Fix default misaligned access trap
riscv: Add qspinlock support
dt-bindings: riscv: Add Ziccrse ISA extension description
riscv: Add ISA extension parsing for Ziccrse
asm-generic: ticket-lock: Add separate ticket-lock.h
asm-generic: ticket-lock: Reuse arch_spinlock_t of qspinlock
riscv: Implement xchg8/16() using Zabha
riscv: Implement arch_cmpxchg128() using Zacas
riscv: Improve zacas fully-ordered cmpxchg()
riscv: Implement cmpxchg8/16() using Zabha
dt-bindings: riscv: Add Zabha ISA extension description
riscv: Implement cmpxchg32/64() using Zacas
riscv: Do not fail to build on byte/halfword operations with Zawrs
riscv: Move cpufeature.h macros into their own header
KVM: riscv: selftests: Add Smnpm and Ssnpm to get-reg-list test
RISC-V: KVM: Allow Smnpm and Ssnpm extensions for guests
riscv: hwprobe: Export the Supm ISA extension
riscv: selftests: Add a pointer masking test
riscv: Allow ptrace control of the tagged address ABI
...
- Rework kfence support for the HPT MMU to work on systems with >= 16TB of RAM.
- Remove the powerpc "maple" platform, used by the "Yellow Dog Powerstation".
- Add support for DYNAMIC_FTRACE_WITH_CALL_OPS,
DYNAMIC_FTRACE_WITH_DIRECT_CALLS & BPF Trampolines.
- Add support for running KVM nested guests on Power11.
- Other small features, cleanups and fixes.
Thanks to: Amit Machhiwal, Arnd Bergmann, Christophe Leroy, Costa Shulyupin,
David Hunter, David Wang, Disha Goel, Gautam Menghani, Geert Uytterhoeven,
Hari Bathini, Julia Lawall, Kajol Jain, Keith Packard, Lukas Bulwahn, Madhavan
Srinivasan, Markus Elfring, Michal Suchanek, Ming Lei, Mukesh Kumar Chaurasiya,
Nathan Chancellor, Naveen N Rao, Nicholas Piggin, Nysal Jan K.A, Paulo Miguel
Almeida, Pavithra Prakash, Ritesh Harjani (IBM), Rob Herring (Arm), Sachin P
Bappalige, Shen Lichuan, Simon Horman, Sourabh Jain, Thomas Weißschuh, Thorsten
Blum, Thorsten Leemhuis, Venkat Rao Bagalkote, Zhang Zekun,
zhang jiao.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRjvi15rv0TSTaE+SIF0oADX8seIQUCZ0Fi5AAKCRAF0oADX8se
IeI0AQCAkNWRYzGNzPM6aMwDpq5qdeZzvp0rZxuNsRSnIKJlxAD+PAOxOietgjbQ
Lxt3oizg+UcH/304Y/iyT8IrwI4n+gE=
=xNtu
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Rework kfence support for the HPT MMU to work on systems with >= 16TB
of RAM.
- Remove the powerpc "maple" platform, used by the "Yellow Dog
Powerstation".
- Add support for DYNAMIC_FTRACE_WITH_CALL_OPS,
DYNAMIC_FTRACE_WITH_DIRECT_CALLS & BPF Trampolines.
- Add support for running KVM nested guests on Power11.
- Other small features, cleanups and fixes.
Thanks to Amit Machhiwal, Arnd Bergmann, Christophe Leroy, Costa
Shulyupin, David Hunter, David Wang, Disha Goel, Gautam Menghani, Geert
Uytterhoeven, Hari Bathini, Julia Lawall, Kajol Jain, Keith Packard,
Lukas Bulwahn, Madhavan Srinivasan, Markus Elfring, Michal Suchanek,
Ming Lei, Mukesh Kumar Chaurasiya, Nathan Chancellor, Naveen N Rao,
Nicholas Piggin, Nysal Jan K.A, Paulo Miguel Almeida, Pavithra Prakash,
Ritesh Harjani (IBM), Rob Herring (Arm), Sachin P Bappalige, Shen
Lichuan, Simon Horman, Sourabh Jain, Thomas Weißschuh, Thorsten Blum,
Thorsten Leemhuis, Venkat Rao Bagalkote, Zhang Zekun, and zhang jiao.
* tag 'powerpc-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (89 commits)
EDAC/powerpc: Remove PPC_MAPLE drivers
powerpc/perf: Add per-task/process monitoring to vpa_pmu driver
powerpc/kvm: Add vpa latency counters to kvm_vcpu_arch
docs: ABI: sysfs-bus-event_source-devices-vpa-pmu: Document sysfs event format entries for vpa_pmu
powerpc/perf: Add perf interface to expose vpa counters
MAINTAINERS: powerpc: Mark Maddy as "M"
powerpc/Makefile: Allow overriding CPP
powerpc-km82xx.c: replace of_node_put() with __free
ps3: Correct some typos in comments
powerpc/kexec: Fix return of uninitialized variable
macintosh: Use common error handling code in via_pmu_led_init()
powerpc/powermac: Use of_property_match_string() in pmac_has_backlight_type()
powerpc: remove dead config options for MPC85xx platform support
powerpc/xive: Use cpumask_intersects()
selftests/powerpc: Remove the path after initialization.
powerpc/xmon: symbol lookup length fixed
powerpc/ep8248e: Use %pa to format resource_size_t
powerpc/ps3: Reorganize kerneldoc parameter names
KVM: PPC: Book3S HV: Fix kmv -> kvm typo
powerpc/sstep: make emulate_vsx_load and emulate_vsx_store static
...
If the :enter_dead() idle state callback fails for a certain state,
there may be still a shallower state for which it will work.
Because the only caller of cpuidle_play_dead(), native_play_dead(),
falls back to hlt_play_dead() if it returns an error, it should
better try all of the idle states for which :enter_dead() is present
before failing, so change it accordingly.
Also notice that the :enter_dead() state callback is not expected
to return on success (the CPU should be "dead" then), so make
cpuidle_play_dead() ignore its return value.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com> # 6.12-rc7
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://patch.msgid.link/3318440.aeNJFYEL58@rjwysocki.net
Drop the include of dma-mapping.h in machdep.h, replace it with forward
declarations of struct device and struct pci_dev, and include time64.h
and page.h which are required for time64_t and pgprot_t respectively.
Add direct includes of some other headers to some files that were
getting them via machdep.h.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241009051826.132805-2-mpe@ellerman.id.au
Fixed some confusing typos that were currently identified with codespell,
the details are as follows:
-in the code comments:
drivers/cpuidle/cpuidle-arm.c:142: registeration ==> registration
drivers/cpuidle/cpuidle-qcom-spm.c:51: accidently ==> accidentally
drivers/cpuidle/cpuidle.c:409: dependant ==> dependent
drivers/cpuidle/driver.c:264: occuring ==> occurring
drivers/cpuidle/driver.c:299: occuring ==> occurring
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Link: https://patch.msgid.link/20240927081018.8608-1-shenlichuan@vivo.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Nick Hu <nick.hu@sifive.com> says:
Add this patchset so the devices that inside the cpu/cluster power domain
can use the cpuidle pd to register the genpd notifier to handle the PM
when cpu/cluster is going to enter a deeper sleep state.
* b4-shazam-merge:
cpuidle: riscv-sbi: Add cpuidle_disabled() check
cpuidle: riscv-sbi: Move sbi_cpuidle_init to arch_initcall
Link: https://lore.kernel.org/r/20240814054434.3563453-1-nick.hu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The consumer devices that inside the cpu/cluster power domain may register
the genpd notifier where their power domains point to the pd nodes under
'/cpus/power-domains'. If the cpuidle.off==1, the genpd notifier will fail
due to sbi_cpuidle_pd_allow_domain_state is not set. We also need the
sbi_cpuidle_cpuhp_up/down to invoke the callbacks. Therefore adding a
cpuidle_disabled() check before cpuidle_register() to address the issue.
Signed-off-by: Nick Hu <nick.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240814054434.3563453-3-nick.hu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Remove CPU iowaiters influence on idle state selection.
Remove the menu notion of performance multiplier which increased with
the number of tasks that went to iowait sleep on this CPU and haven't
woken up yet.
Relying on iowait for cpuidle is problematic for a few reasons:
1. There is no guarantee that an iowaiting task will wake up on the
same CPU.
2. The task being in iowait says nothing about the idle duration, we
could be selecting shallower states for a long time.
3. The task being in iowait doesn't always imply a performance hit
with increased latency.
4. If there is such a performance hit, the number of iowaiting tasks
doesn't directly correlate.
5. The definition of iowait altogether is vague at best, it is
sprinkled across kernel code.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/20240905092645.2885200-2-christian.loehle@arm.com
[ rjw: Minor edits in the changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Add support for s2idle for CPU PM domains on PREEMPT_RT
- Add device managed version of dev_pm_domain_attach|detach_list()
- Improve layout of the debugfs summary table
pmdomain providers:
- amlogic: Remove obsolete vpu domain driver
- bcm: raspberrypi: Add support for devices used as wakeup-sources
- imx: Fixup clock handling for imx93 at driver remove
- rockchip: Add gating support for RK3576
- rockchip: Add support for RK3576 SoC
- Some OF parsing simplifications
- Some simplifications by using dev_err_probe() and guard()
pmdomain consumers:
- qcom/media/venus: Convert to the device managed APIs for PM domains
cpuidle-psci:
- Add support for s2idle/s2ram for the hierarchical topology on PREEMPT_RT
- Some OF parsing simplifications
-----BEGIN PGP SIGNATURE-----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=nWyc
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add support for s2idle for CPU PM domains on PREEMPT_RT
- Add device managed version of dev_pm_domain_attach|detach_list()
- Improve layout of the debugfs summary table
pmdomain providers:
- amlogic: Remove obsolete vpu domain driver
- bcm: raspberrypi: Add support for devices used as wakeup-sources
- imx: Fixup clock handling for imx93 at driver remove
- rockchip: Add gating support for RK3576
- rockchip: Add support for RK3576 SoC
- Some OF parsing simplifications
- Some simplifications by using dev_err_probe() and guard()
pmdomain consumers:
- qcom/media/venus: Convert to the device managed APIs for PM domains
cpuidle-psci:
- Add support for s2idle/s2ram for the hierarchical topology on
PREEMPT_RT
- Some OF parsing simplifications"
* tag 'pmdomain-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (39 commits)
pmdomain: core: Reduce debug summary table width
pmdomain: core: Move mode_status_str()
pmdomain: core: Fix "managed by" alignment in debug summary
pmdomain: core: Harden inter-column space in debug summary
pmdomain: rockchip: Add gating masks for rk3576
pmdomain: rockchip: Add gating support
pmdomain: rockchip: Simplify dropping OF node reference
pmdomain: mediatek: make use of dev_err_cast_probe()
pmdomain: imx93-pd: drop the context variable "init_off"
pmdomain: imx93-pd: don't unprepare clocks on driver remove
pmdomain: imx93-pd: replace dev_err() with dev_err_probe()
pmdomain: qcom: rpmpd: Simplify locking with guard()
pmdomain: qcom: rpmhpd: Simplify locking with guard()
pmdomain: qcom: cpr: Simplify locking with guard()
pmdomain: qcom: cpr: Simplify with dev_err_probe()
pmdomain: imx: gpcv2: Simplify with scoped for each OF child loop
pmdomain: imx: gpc: Simplify with scoped for each OF child loop
pmdomain: rockchip: SimplUlf Hanssonify locking with guard()
pmdomain: rockchip: Simplify with scoped for each OF child loop
pmdomain: qcom-cpr: Use scope based of_node_put() to simplify code.
...
Checking for index < 0 is useless because the find_deepest_state()
function never really returns a negative value.
Since this hasn't been reported in over 9 years it's dead code, so
remove it.
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Link: https://patch.msgid.link/20240821114250.1416421-1-d-gole@ti.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://patch.msgid.link/20240820094023.61155-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Two return statements in sbi_cpuidle_dt_init_states() did not drop the
OF node reference count. Solve the issue and simplify entire error
handling with scoped/cleanup.h.
Fixes: 6abf32f1d9 ("cpuidle: Add RISC-V SBI CPU idle driver")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://patch.msgid.link/20240820094023.61155-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240816150931.142208-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240816150931.142208-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To enable the domain-idle-states to be used during s2idle on a PREEMPT_RT
based configuration, let's allow the re-assignment of the ->enter_s2idle()
callback to psci_enter_s2idle_domain_idle_state().
Similar to s2ram, let's leave the support for CPU hotplug outside
PREEMPT_RT, as it's depending on using runtime PM. For s2idle, this means
that an offline CPU's PM domain will remain powered-on. In practise this
may lead to that a shallower idle-state than necessary gets selected, which
shouldn't be an issue (besides wasting power).
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Raghavendra Kakarla <quic_rkakarla@quicinc.com> # qcm6490 with PREEMPT_RT set
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240527142557.321610-8-ulf.hansson@linaro.org
The hierarchical PM domain topology are currently disabled on a PREEMPT_RT
based configuration. As a first step to enable it to be used, let's try to
attach the CPU devices to their PM domains on PREEMPT_RT. In this way the
syscore ops becomes available, allowing the PM domain topology to be
managed during s2ram.
For the moment let's leave the support for CPU hotplug outside PREEMPT_RT,
as it's depending on using runtime PM. For s2ram, this isn't a problem as
all CPUs are managed via the syscore ops.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Raghavendra Kakarla <quic_rkakarla@quicinc.com> # qcm6490 with PREEMPT_RT set
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240527142557.321610-7-ulf.hansson@linaro.org
When using the hierarchical topology and PSCI OSI-mode we may end up
overriding the deepest idle-state's ->enter|enter_s2idle() callbacks, but
there is no point to also re-assign the CPUIDLE_FLAG_RCU_IDLE for the
idle-state in question, as that has already been set when parsing the
states from DT. See init_state_node().
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Raghavendra Kakarla <quic_rkakarla@quicinc.com> # qcm6490 with PREEMPT_RT set
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240527142557.321610-6-ulf.hansson@linaro.org
The domain-idle-states are currently disabled on a PREEMPT_RT based
configuration for the cpuidle-psci-domain. To enable them to be used for
system-wide suspend and in particular during s2idle, let's set the
GENPD_FLAG_RPM_ALWAYS_ON instead of GENPD_FLAG_ALWAYS_ON for the
corresponding genpd provider.
In this way, the runtime PM path remains disabled in genpd for its attached
devices, while powering-on/off the PM domain during system-wide suspend
becomes allowed.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Raghavendra Kakarla <quic_rkakarla@quicinc.com> # qcm6490 with PREEMPT_RT set
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240527142557.321610-5-ulf.hansson@linaro.org
When bailing out early, teo will not query the sleep length anymore
since commit 6da8f9ba5a ("cpuidle: teo:
Skip tick_nohz_get_sleep_length() call in some cases") with an
expected sleep_length_ns value of KTIME_MAX.
This lead to state0 accumulating lots of 'intercepts' because
the actually measured sleep length was < KTIME_MAX, so query the sleep
length instead for teo to recognize if it still is in an
intercept-likely scenario without alternating between the two modes.
Fundamentally we can only do one of the two:
1. Skip sleep_length_ns query when we think intercept is likely.
2. Have accurate data if sleep_length_ns is actually intercepted when
we believe it is currently intercepted.
Previously teo did the former while this patch chooses the latter as
the additional time it takes to query the sleep length was found to be
negligible and the variants of option 1 (count all unknowns as misses
or count all unknown as hits) had significant regressions (as misses
had lots of too shallow idle state selections and as hits had terrible
performance in intercept-heavy workloads).
Fixes: 6da8f9ba5a ("cpuidle: teo: Skip tick_nohz_get_sleep_length() call in some cases")
Link: https://patch.msgid.link/c40acf72-010f-4a8b-80e4-33f133ba266b@arm.com
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The logic for recent intercepts didn't work, there is an underflow
of the 'recent' value that can be observed during boot already, which
teo usually doesn't recover from, making the entire logic pointless.
Furthermore the recent intercepts also were never reset, thus not
actually being very 'recent'.
Having underflowed 'recent' values lead to teo always acting as if
we were in a scenario were expected sleep length based on timers is
too high and it therefore unnecessarily selecting shallower states.
Experiments show that the remaining 'intercept' logic is enough to
quickly react to scenarios in which teo cannot rely on the timer
expected sleep length.
See also here:
https://lore.kernel.org/lkml/0ce2d536-1125-4df8-9a5b-0d5e389cd8af@arm.com/
Fixes: 77577558f2 ("cpuidle: teo: Rework most recent idle duration values treatment")
Link: https://patch.msgid.link/20240628095955.34096-3-christian.loehle@arm.com
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This reverts commit 9ce0f7c4bc.
Util-awareness was reported to be too aggressive in selecting shallower
states. Additionally a single threshold was found to not be suitable
for reasoning about sleep length as, for all practical purposes,
almost arbitrary sleep lengths are still possible for any load value.
Fixes: 9ce0f7c4bc ("cpuidle: teo: Introduce util-awareness")
Link: https://patch.msgid.link/20240628095955.34096-2-christian.loehle@arm.com
Reported-by: Qais Yousef <qyousef@layalina.io>
Reported-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/cpuidle/cpuidle-haltpoll.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The performance impact of loadavg was removed with commit a7fe5190c0
("cpuidle: menu: Remove get_loadavg() from the performance multiplier")
With only iowait remaining the description can be simplified, remove
also the no longer needed includes.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Rework the handling of disabled turbo in the intel_pstate driver and
make it update the maximum CPU frequency consistently regardless of
the reason on top of a number of cleanups (Rafael Wysocki).
- Add missing checks for NULL .exit() cpufreq driver callback to the
cpufreq core (Viresh Kumar).
- Prevent pulicy->max from going above the frequency QoS maximum value
when cpufreq_frequency_table_verify() is used (Xuewen Yan).
- Prevent a negative CPU number or frequency value from being printed
if they are really large (Joshua Yeong).
- Update MAINTAINERS entry for amd-pstate to add two new submaintainers
and a designated reviewer (Huang Rui).
- Clean up the amd-pstate driver and update its documentation (Gautham
Shenoy).
- Fix the highest frequency issue in the amd-pstate driver which limits
performance (Perry Yuan).
- Enable CPPC v2 for certain processors in the family 17H, as requested
by TR40 processor users who expect improved performance and lower
system temperature (Perry Yuan).
- Change latency and delay values to be read from platform firmware
firstly for more accurate timing (Perry Yuan).
- A new quirk is introduced for supporting amd-pstate on legacy
processors which either lack CPPC capability, or only only have CPPC
v2 capability (Perry Yuan).
- Sun50i cpufreq: Add support for opp_supported_hw, H616 platform and
general cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi,
Dan Carpenter, Viresh Kumar).
- CPPC cpufreq: Fix possible null pointer dereference (Aleksandr
Mishin).
- Eliminate uses of of_node_put() from cpufreq (Javier Carrasco,
Shivani Gupta).
- brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens).
- mediatek cpufreq: Add support for MT7988A (Sam Shih).
- cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei Fan).
- Fix struct cpudata::epp_cached kernel-doc in the intel_pstate cpufreq
driver (Jeff Johnson).
- Fix kerneldoc description of ladder_do_selection() (Jeff Johnson).
- Convert the cpuidle kirkwood driver to platform remove callback
returning void (Yangtao Li).
- Replace deprecated strncpy() with strscpy() in the hibernation core
code (Justin Stitt).
- Use %ps to simplify debug output in the core system-wide suspend and
resume code (Len Brown).
- Remove unnecessary else from device_init_wakeup() and make
device_wakeup_disable() return void (Dhruva Gole).
- Enable PMU support in the Intel TPMI RAPL driver (Zhang Rui).
- Add support for ArrowLake-H platform to the Intel RAPL driver (Zhang
Rui).
- Avoid explicit cpumask allocation on stack in DTPM (Dawei Li).
- Make the Samsung exynos-asv driver update the Energy Model after
adjusting voltage on top of some preliminary changes of the OPP and
Enery Model generic code (Lukasz Luba).
- Remove a reference to a function that has been dropped from the power
management documentation (Bjorn Helgaas).
- Convert the platfrom remove callback to .remove_new for the
exyno-nocp, exynos-ppmu, mtk-cci-devfreq, sun8i-a33-mbus, and
rk3399_dmc devfreq drivers (Uwe Kleine-König).
- Use DEFINE_SIMPLE_PM_OPS for exyno-bus.c driver (Anand Moon).
-----BEGIN PGP SIGNATURE-----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=el5Y
-----END PGP SIGNATURE-----
Merge tag 'pm-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are mostly cpufreq updates, including a significant intel-pstate
driver update and several amd-pstate improvements plus some updates of
ARM cpufreq drivers, general fixes and cleanups.
Also included are changes related to system sleep, power capping
updates adding support for a new platform and a new hardware feature
(among other things), a Samsung exynos-asv driver update allowing it
to change its Energy Model after adjusting voltage, minor cpuidle and
devfreq updates and a small documentation cleanup.
Specifics:
- Rework the handling of disabled turbo in the intel_pstate driver
and make it update the maximum CPU frequency consistently
regardless of the reason on top of a number of cleanups (Rafael
Wysocki)
- Add missing checks for NULL .exit() cpufreq driver callback to the
cpufreq core (Viresh Kumar)
- Prevent pulicy->max from going above the frequency QoS maximum
value when cpufreq_frequency_table_verify() is used (Xuewen Yan)
- Prevent a negative CPU number or frequency value from being printed
if they are really large (Joshua Yeong)
- Update MAINTAINERS entry for amd-pstate to add two new
submaintainers and a designated reviewer (Huang Rui)
- Clean up the amd-pstate driver and update its documentation
(Gautham Shenoy)
- Fix the highest frequency issue in the amd-pstate driver which
limits performance (Perry Yuan)
- Enable CPPC v2 for certain processors in the family 17H, as
requested by TR40 processor users who expect improved performance
and lower system temperature (Perry Yuan)
- Change latency and delay values to be read from platform firmware
firstly for more accurate timing (Perry Yuan)
- A new quirk is introduced for supporting amd-pstate on legacy
processors which either lack CPPC capability, or only only have
CPPC v2 capability (Perry Yuan)
- Sun50i cpufreq: Add support for opp_supported_hw, H616 platform and
general cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi,
Dan Carpenter, Viresh Kumar)
- CPPC cpufreq: Fix possible null pointer dereference (Aleksandr
Mishin)
- Eliminate uses of of_node_put() from cpufreq (Javier Carrasco,
Shivani Gupta)
- brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens)
- mediatek cpufreq: Add support for MT7988A (Sam Shih)
- cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei
Fan)
- Fix struct cpudata::epp_cached kernel-doc in the intel_pstate
cpufreq driver (Jeff Johnson)
- Fix kerneldoc description of ladder_do_selection() (Jeff Johnson)
- Convert the cpuidle kirkwood driver to platform remove callback
returning void (Yangtao Li)
- Replace deprecated strncpy() with strscpy() in the hibernation core
code (Justin Stitt)
- Use %ps to simplify debug output in the core system-wide suspend
and resume code (Len Brown)
- Remove unnecessary else from device_init_wakeup() and make
device_wakeup_disable() return void (Dhruva Gole)
- Enable PMU support in the Intel TPMI RAPL driver (Zhang Rui)
- Add support for ArrowLake-H platform to the Intel RAPL driver
(Zhang Rui)
- Avoid explicit cpumask allocation on stack in DTPM (Dawei Li)
- Make the Samsung exynos-asv driver update the Energy Model after
adjusting voltage on top of some preliminary changes of the OPP and
Enery Model generic code (Lukasz Luba)
- Remove a reference to a function that has been dropped from the
power management documentation (Bjorn Helgaas)
- Convert the platfrom remove callback to .remove_new for the
exyno-nocp, exynos-ppmu, mtk-cci-devfreq, sun8i-a33-mbus, and
rk3399_dmc devfreq drivers (Uwe Kleine-König)
- Use DEFINE_SIMPLE_PM_OPS for exyno-bus.c driver (Anand Moon)"
* tag 'pm-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (68 commits)
PM / devfreq: exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
PM / devfreq: rk3399_dmc: Convert to platform remove callback returning void
PM / devfreq: sun8i-a33-mbus: Convert to platform remove callback returning void
PM / devfreq: mtk-cci: Convert to platform remove callback returning void
PM / devfreq: exynos-ppmu: Convert to platform remove callback returning void
PM / devfreq: exynos-nocp: Convert to platform remove callback returning void
cpufreq: amd-pstate: fix the highest frequency issue which limits performance
cpufreq: intel_pstate: fix struct cpudata::epp_cached kernel-doc
cpuidle: ladder: fix ladder_do_selection() kernel-doc
powercap: intel_rapl_tpmi: Enable PMU support
powercap: intel_rapl: Introduce APIs for PMU support
PM: hibernate: replace deprecated strncpy() with strscpy()
cpufreq: Fix up printing large CPU numbers and frequency values
MAINTAINERS: cpufreq: amd-pstate: Add co-maintainers and reviewer
cpufreq: amd-pstate: remove unused variable lowest_nonlinear_freq
cpufreq: amd-pstate: fix code format problems
cpufreq: amd-pstate: Add quirk for the pstate CPPC capabilities missing
cppc_acpi: print error message if CPPC is unsupported
cpufreq: amd-pstate: get transition delay and latency value from ACPI tables
cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0
...
make C=1 reports:
warning: Function parameter or struct member 'dev' not described in 'ladder_do_selection'
Document 'dev' for this function.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_first_and_and() and cpumask_weight_and() to avoid the need
for a temporary cpumask on the stack.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240416085454.3547175-8-dawei.li@shingroup.cn
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230712094014.41787-1-frank.li@vivo.com
Clients like regulators, interconnects and clocks depend on rpmh-rsc to
vote on resources and rpmh-rsc depends on psci power-domains to complete
probe. All of them are in core_initcall().
Change psci domain init level to core_initcall() to avoid probe defer from
all of the above.
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Link: https://lore.kernel.org/r/20240217-init_level-v1-2-bde9e11f8317@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To simplify the code, let's drop psci_dt_attach|detach_cpu() and use the
common dt_idle_attach|detach_cpu() directly instead.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240228151139.2650258-1-ulf.hansson@linaro.org
* Support for various vector-accelerated crypto routines.
* Hibernation is now enabled for portable kernel builds.
* mmap_rnd_bits_max is larger on systems with larger VAs.
* Support for fast GUP.
* Support for membarrier-based instruction cache synchronization.
* Support for the Andes hart-level interrupt controller and PMU.
* Some cleanups around unaligned access speed probing and Kconfig
settings.
* Support for ACPI LPI and CPPC.
* Various cleanus related to barriers.
* A handful of fixes.
-----BEGIN PGP SIGNATURE-----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=3dL5
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for various vector-accelerated crypto routines
- Hibernation is now enabled for portable kernel builds
- mmap_rnd_bits_max is larger on systems with larger VAs
- Support for fast GUP
- Support for membarrier-based instruction cache synchronization
- Support for the Andes hart-level interrupt controller and PMU
- Some cleanups around unaligned access speed probing and Kconfig
settings
- Support for ACPI LPI and CPPC
- Various cleanus related to barriers
- A handful of fixes
* tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (66 commits)
riscv: Fix syscall wrapper for >word-size arguments
crypto: riscv - add vector crypto accelerated AES-CBC-CTS
crypto: riscv - parallelize AES-CBC decryption
riscv: Only flush the mm icache when setting an exec pte
riscv: Use kcalloc() instead of kzalloc()
riscv/barrier: Add missing space after ','
riscv/barrier: Consolidate fence definitions
riscv/barrier: Define RISCV_FULL_BARRIER
riscv/barrier: Define __{mb,rmb,wmb}
RISC-V: defconfig: Enable CONFIG_ACPI_CPPC_CPUFREQ
cpufreq: Move CPPC configs to common Kconfig and add RISC-V
ACPI: RISC-V: Add CPPC driver
ACPI: Enable ACPI_PROCESSOR for RISC-V
ACPI: RISC-V: Add LPI driver
cpuidle: RISC-V: Move few functions to arch/riscv
riscv: Introduce set_compat_task() in asm/compat.h
riscv: Introduce is_compat_thread() into compat.h
riscv: add compile-time test into is_compat_task()
riscv: Replace direct thread flag check with is_compat_task()
riscv: Improve arch_get_mmap_end() macro
...
To support ACPI Low Power Idle (LPI), few functions are required which
are currently static functions in the DT based cpuidle driver. Hence,
move them under arch/riscv so that ACPI driver also can use them. Since
they are no longer static functions, append "riscv_" prefix to the
function name.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20240118062930.245937-2-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
