[ Upstream commit 467e00b30dfe75c4cfc2197ceef1fddca06adc25 ]
Currently the kzalloc failure check just sets reports the failure
and sets the variable ret to -ENOMEM, which is not checked later
for this specific error. Fix this by just returning -ENOMEM rather
than setting ret.
Fixes: 4fb9307154 ("drm/amd/amdgpu: remove redundant host to psp cmd buf allocations")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1ee9d1a0962c13ba5ab7e47d33a80e3b8dc4b52e)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1cc506f08b ]
Debug messages related to the kernel process of flashing an updated
IFWI are needlessly noisy and also confusing.
Downgrade them to debug instead and clarify what they are actually
doing.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 467e00b30dfe ("drm/amd/amdgpu: Fix missing error return on kzalloc failure")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b03127d47 ]
On ASICs with PSPv13.0.6, TMR is reserved at boot time. There is no need
to allocate TMR region by driver. However, it's still required to send
SETUP_TMR command to PSP.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 467e00b30dfe ("drm/amd/amdgpu: Fix missing error return on kzalloc failure")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f14c8c3e1f ]
Fix the following checkpatch warnings & error in amdgpu_psp.c
WARNING: Comparisons should place the constant on the right side of the test
WARNING: braces {} are not necessary for single statement blocks
WARNING: please, no space before tabs
WARNING: braces {} are not necessary for single statement blocks
ERROR: that open brace { should be on the previous line
Suggested-by: Christian König <christian.koenig@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 467e00b30dfe ("drm/amd/amdgpu: Fix missing error return on kzalloc failure")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e93136809 ]
The initialized status indicates RAS TA is loaded, but in some cases
(such as RAS fatal error) RAS TA could be destroyed although it's not
unloaded. Hence we load RAS TA unconditionally here.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Candice Li <candice.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 467e00b30dfe ("drm/amd/amdgpu: Fix missing error return on kzalloc failure")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf7d777289 ]
1. Save TA unload psp response status
2. Add RAS TA loading status check for initializaiton
3. Drop RAS context teardown to allow RAS TA to be reloaded
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Candice Li <candice.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 467e00b30dfe ("drm/amd/amdgpu: Fix missing error return on kzalloc failure")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bdd5a14e660062114bdebaef9ad52adf04970a89 ]
The bridge has three bootstrap pins which are sampled to determine the
frequency of the external reference clock. The driver will also
(over)write that setting. But it seems this is racy after the bridge is
enabled. It was observed that although the driver write the correct
value (by sniffing on the I2C bus), the register has the wrong value.
The datasheet states that the GPIO lines have to be stable for at least
5us after asserting the EN signal. Thus, there seems to be some logic
which samples the GPIO lines and this logic appears to overwrite the
register value which was set by the driver. Waiting 20us after
asserting the EN line resolves this issue.
Fixes: a095f15c00 ("drm/bridge: add support for sn65dsi86 bridge driver")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250821122341.1257286-1-mwalle@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e811b088a3641861fc9d2b2b840efc61a0f1907d ]
In DMA mode fsl_lpspi_reset() is always called at the end, even when the
transfer is aborted. In PIO mode aborts skip the reset leaving the FIFO
filled and the module enabled.
Fix it by always calling fsl_lpspi_reset().
Fixes: a15dc3d657 ("spi: lpspi: Fix CLK pin becomes low before one transfer")
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-3-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbe33705864ba2697a2939de715b81538cf32430 ]
The driver currently supports multiple chip-selects, but only sets the
polarity for the first one (CS 0). Fix it by setting the PCSPOL bit for
the desired chip-select.
Fixes: 5314987de5 ("spi: imx: add lpspi bus driver")
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-2-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 782a7c73078e1301c0c427f21c06377d77dfa541 ]
Commit 6a13044849 ("spi: lpspi: Fix wrong transmission when don't use
CONT") breaks transmissions when CONT is used. The TDIE interrupt should
not be disabled in all cases. If CONT is used and the TX transfer is not
yet completed yet, but the interrupt handler is called because there are
characters to be received, TDIE is replaced with FCIE. When the transfer
is finally completed, SR_TDF is set but the interrupt handler isn't
called again.
Fixes: 6a13044849 ("spi: lpspi: Fix wrong transmission when don't use CONT")
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-1-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1180c79fbf36e4c02e76ae4658509523437e52a4 ]
The fans controlled by the driver can get stuck at 0 RPM if they are
configured below a 20% duty cycle. The driver tries to avoid this by
enforcing a minimum duty cycle of 20%, but this is done after the fans
are registered with the thermal subsystem. This is too late as the
thermal subsystem can set their current state before the driver is able
to enforce the minimum duty cycle.
Fix by setting the minimum duty cycle before registering the fans with
the thermal subsystem.
Fixes: d7efb2ebc7 ("hwmon: (mlxreg-fan) Extend driver to support multiply cooling devices")
Reported-by: Nikolay Aleksandrov <razor@blackwall.org>
Tested-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20250730201715.1111133-1-vadimp@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a81f78caa53e0633cf311ca1526377d9bff7479 ]
In the do_validate_mem(), the call to add_interval() does not
handle errors. If kmalloc() fails in add_interval(), it could
result in a null pointer being inserted into the linked list,
leading to illegal memory access when sub_interval() is called
next.
This patch adds an error handling for the add_interval(). If
add_interval() returns an error, the function will return early
with the error code.
Fixes: 7b4884ca88 ("pcmcia: validate late-added resources")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit 71598a5a77 which is
commit 1f02f2044b upstream.
This commit introduced a regression, however the fix for the regression:
aa5fc4362fac ("drm/amdgpu: fix task hang from failed job submission
during process kill") depends on things not yet present in 6.12.y and
older kernels. Since this commit is more of an optimization, just
revert it for 6.12.y and older stable kernels.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x - 6.12.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bcd6659d4911c528381531472a0cefbd4003e29e upstream.
It was reported that HP EliteDesk 800 G4 DM 65W (SSID 103c:845a) needs
the similar quirk for enabling HDMI outputs, too. This patch adds the
corresponding quirk entry.
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250901115009.27498-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0beca868cd upstream.
[WHAT & HOW]
Functions dp_enable_link_phy and dp_disable_link_phy can pass link_res
without initializing hpo_dp_link_enc and it is necessary to check for
null before dereferencing.
This fixes 2 FORWARD_NULL issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ Minor context change fixed. ]
Signed-off-by: Alva Lan <alvalan9@foxmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 974e3fe0ac upstream.
Encoding file handles is usually performed by a filesystem >encode_fh()
method that may fail for various reasons.
The legacy users of exportfs_encode_fh(), namely, nfsd and
name_to_handle_at(2) syscall are ready to cope with the possibility
of failure to encode a file handle.
There are a few other users of exportfs_encode_{fh,fid}() that
currently have a WARN_ON() assertion when ->encode_fh() fails.
Relax those assertions because they are wrong.
The second linked bug report states commit 16aac5ad1f ("ovl: support
encoding non-decodable file handles") in v6.6 as the regressing commit,
but this is not accurate.
The aforementioned commit only increases the chances of the assertion
and allows triggering the assertion with the reproducer using overlayfs,
inotify and drop_caches.
Triggering this assertion was always possible with other filesystems and
other reasons of ->encode_fh() failures and more particularly, it was
also possible with the exact same reproducer using overlayfs that is
mounted with options index=on,nfs_export=on also on kernels < v6.6.
Therefore, I am not listing the aforementioned commit as a Fixes commit.
Backport hint: this patch will have a trivial conflict applying to
v6.6.y, and other trivial conflicts applying to stable kernels < v6.6.
Reported-by: syzbot+ec07f6f5ce62b858579f@syzkaller.appspotmail.com
Tested-by: syzbot+ec07f6f5ce62b858579f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-unionfs/671fd40c.050a0220.4735a.024f.GAE@google.com/
Reported-by: Dmitry Safonov <dima@arista.com>
Closes: https://lore.kernel.org/linux-fsdevel/CAGrbwDTLt6drB9eaUagnQVgdPBmhLfqqxAf3F+Juqy_o6oP8uw@mail.gmail.com/
Cc: stable@vger.kernel.org
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20241219115301.465396-1-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Norbert Manthey <nmanthey@amazon.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ac4e04d9e3 ]
When turbo mode is unavailable on a Skylake-X system, executing the
command:
# echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
results in an unchecked MSR access error:
WRMSR to 0x199 (attempted to write 0x0000000100001300).
This issue was reproduced on an OEM (Original Equipment Manufacturer)
system and is not a common problem across all Skylake-X systems.
This error occurs because the MSR 0x199 Turbo Engage Bit (bit 32) is set
when turbo mode is disabled. The issue arises when intel_pstate fails to
detect that turbo mode is disabled. Here intel_pstate relies on
MSR_IA32_MISC_ENABLE bit 38 to determine the status of turbo mode.
However, on this system, bit 38 is not set even when turbo mode is
disabled.
According to the Intel Software Developer's Manual (SDM), the BIOS sets
this bit during platform initialization to enable or disable
opportunistic processor performance operations. Logically, this bit
should be set in such cases. However, the SDM also specifies that "OS
and applications must use CPUID leaf 06H to detect processors with
opportunistic processor performance operations enabled."
Therefore, in addition to checking MSR_IA32_MISC_ENABLE bit 38, verify
that CPUID.06H:EAX[1] is 0 to accurately determine if turbo mode is
disabled.
Fixes: 4521e1a0ce ("cpufreq: intel_pstate: Reflect current no_turbo state correctly")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0940f1a801 ]
The global.turbo_disabled is updated quite often, especially in the
passive mode in which case it is updated every time the scheduler calls
into the driver. However, this is generally not necessary and it adds
MSR read overhead to scheduler code paths (and that particular MSR is
slow to read).
For this reason, make the driver read MSR_IA32_MISC_ENABLE_TURBO_DISABLE
just once at the cpufreq driver registration time and remove all of the
in-flight updates of global.turbo_disabled.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Stable-dep-of: ac4e04d9e3 ("cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 37b6ddba96 ]
Setting global turbo flag based on CPU 0 P-state limits is problematic
as it limits max P-state request on every CPU on the system just based
on its P-state limits.
There are two cases in which global.turbo_disabled flag is set:
- When the MSR_IA32_MISC_ENABLE_TURBO_DISABLE bit is set to 1
in the MSR MSR_IA32_MISC_ENABLE. This bit can be only changed by
the system BIOS before power up.
- When the max non turbo P-state is same as max turbo P-state for CPU 0.
The second check is not a valid to decide global turbo state based on
the CPU 0. CPU 0 max turbo P-state can be same as max non turbo P-state,
but for other CPUs this may not be true.
There is no guarantee that max P-state limits are same for every CPU. This
is possible that during fusing max P-state for a CPU is constrained. Also
with the Intel Speed Select performance profile, CPU 0 may not be present
in all profiles. In this case the max non turbo and turbo P-state can be
set to the lowest possible P-state by the hardware when switched to
such profile. Since max non turbo and turbo P-state is same,
global.turbo_disabled flag will be set.
Once global.turbo_disabled is set, any scaling max and min frequency
update for any CPU will result in its max P-state constrained to the max
non turbo P-state.
Hence remove the check of max non turbo P-state equal to max turbo P-state
of CPU 0 to set global turbo disabled flag.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: ac4e04d9e3 ("cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4426e6b4ec ]
The original code would skip null delay pointers, but when the pointers
were converted to point within the spi_device struct, the check was not
updated to skip delays of zero. Hence all spi devices that didn't set
delays would fail to probe.
Fixes: 04e6bb0d6b ("spi: modify set_cs_timing parameter")
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://patch.msgid.link/20250423-spi-tegra114-v1-1-2d608bcc12f9@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 373c36bf79 ]
cs_setup, cs_hold and cs_inactive points to fields of spi_device struct,
so there is no sense in checking them for NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 04e6bb0d6b ("spi: modify set_cs_timing parameter")
Signed-off-by: Alexander Danilenko <al.b.danilenko@gmail.com>
Link: https://lore.kernel.org/r/20230815092058.4083-1-al.b.danilenko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 4426e6b4ec ("spi: tegra114: Don't fail set_cs_timing when delays are zero")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 43f0999af0 ]
Currently, when device mtu is updated, vmxnet3 updates netdev mtu, quiesces
the device and then reactivates it for the ESXi to know about the new mtu.
So, technically the OS stack can start using the new mtu before ESXi knows
about the new mtu.
This can lead to issues for TSO packets which use mss as per the new mtu
configured. This patch fixes this issue by moving the mtu write after
device quiesce.
Cc: stable@vger.kernel.org
Fixes: d1a890fa37 ("net: VMware virtual Ethernet NIC driver: vmxnet3")
Signed-off-by: Ronak Doshi <ronak.doshi@broadcom.com>
Acked-by: Guolin Yang <guolin.yang@broadcom.com>
Changes v1-> v2:
Moved MTU write after destroy of rx rings
Link: https://patch.msgid.link/20250515190457.8597-1-ronak.doshi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ no WRITE_ONCE() in older trees ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 157ae5ffd7 ]
Fix a potential deadlock bug. Observe that in the mtk-cqdma.c
file, functions like mtk_cqdma_issue_pending() and
mtk_cqdma_free_active_desc() properly acquire the pc lock before the vc
lock when handling pc and vc fields. However, mtk_cqdma_tx_status()
violates this order by first acquiring the vc lock before invoking
mtk_cqdma_find_active_desc(), which subsequently takes the pc lock. This
reversed locking sequence (vc → pc) contradicts the established
pc → vc order and creates deadlock risks.
Fix the issue by moving the vc lock acquisition code from
mtk_cqdma_find_active_desc() to mtk_cqdma_tx_status(). Ensure the pc lock
is acquired before the vc lock in the calling function to maintain correct
locking hierarchy. Note that since mtk_cqdma_find_active_desc() is a
static function with only one caller (mtk_cqdma_tx_status()), this
modification safely eliminates the deadlock possibility without affecting
other components.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs to extract
function pairs that can be concurrently executed, and then analyzes the
instructions in the paired functions to identify possible concurrency bugs
including deadlocks, data races and atomicity violations.
Fixes: b1f01e48df ("dmaengine: mediatek: Add MediaTek Command-Queue DMA controller for MT6765 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250508073634.3719-1-chenqiuji666@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f063a28002 ]
The threaded IRQ function in this driver is reading the flag twice: once to
lock a mutex and once to unlock it. Even though the code setting the flag
is designed to prevent it, there are subtle cases where the flag could be
true at the mutex_lock stage and false at the mutex_unlock stage. This
results in the mutex not being unlocked, resulting in a deadlock.
Fix it by making the opt3001_irq() code generally more robust, reading the
flag into a variable and using the variable value at both stages.
Fixes: 94a9b7b180 ("iio: light: add support for TI's opt3001 light sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20250321-opt3001-irq-fix-v1-1-6c520d851562@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6ffa698674 ]
Follow the pattern of other drivers and use aligned_s64 for the
timestamp. This will ensure that the timestamp is correctly aligned on
all architectures.
Also move the unaligned.h header while touching this since it was the
only one not in alphabetical order.
Fixes: 13e945631c ("iio:chemical:pms7003: Fix timestamp alignment and prevent data leak.")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-4-eafac1e22318@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ linux/unaligned.h => asm/unaligned.h ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e08e49d986 ]
When running machines with 64k page size and a 16k nodesize we started
seeing tree log corruption in production. This turned out to be because
we were not writing out dirty blocks sometimes, so this in fact affects
all metadata writes.
When writing out a subpage EB we scan the subpage bitmap for a dirty
range. If the range isn't dirty we do
bit_start++;
to move onto the next bit. The problem is the bitmap is based on the
number of sectors that an EB has. So in this case, we have a 64k
pagesize, 16k nodesize, but a 4k sectorsize. This means our bitmap is 4
bits for every node. With a 64k page size we end up with 4 nodes per
page.
To make this easier this is how everything looks
[0 16k 32k 48k ] logical address
[0 4 8 12 ] radix tree offset
[ 64k page ] folio
[ 16k eb ][ 16k eb ][ 16k eb ][ 16k eb ] extent buffers
[ | | | | | | | | | | | | | | | | ] bitmap
Now we use all of our addressing based on fs_info->sectorsize_bits, so
as you can see the above our 16k eb->start turns into radix entry 4.
When we find a dirty range for our eb, we correctly do bit_start +=
sectors_per_node, because if we start at bit 0, the next bit for the
next eb is 4, to correspond to eb->start 16k.
However if our range is clean, we will do bit_start++, which will now
put us offset from our radix tree entries.
In our case, assume that the first time we check the bitmap the block is
not dirty, we increment bit_start so now it == 1, and then we loop
around and check again. This time it is dirty, and we go to find that
start using the following equation
start = folio_start + bit_start * fs_info->sectorsize;
so in the case above, eb->start 0 is now dirty, and we calculate start
as
0 + 1 * fs_info->sectorsize = 4096
4096 >> 12 = 1
Now we're looking up the radix tree for 1, and we won't find an eb.
What's worse is now we're using bit_start == 1, so we do bit_start +=
sectors_per_node, which is now 5. If that eb is dirty we will run into
the same thing, we will look at an offset that is not populated in the
radix tree, and now we're skipping the writeout of dirty extent buffers.
The best fix for this is to not use sectorsize_bits to address nodes,
but that's a larger change. Since this is a fs corruption problem fix
it simply by always using sectors_per_node to increment the start bit.
Fixes: c4aec299fa ("btrfs: introduce submit_eb_subpage() to submit a subpage metadata page")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 79443a7e9d ]
The handling of the limits_changed flag in struct sugov_policy needs to
be explicitly synchronized to ensure that cpufreq policy limits updates
will not be missed in some cases.
Without that synchronization it is theoretically possible that
the limits_changed update in sugov_should_update_freq() will be
reordered with respect to the reads of the policy limits in
cpufreq_driver_resolve_freq() and in that case, if the limits_changed
update in sugov_limits() clobbers the one in sugov_should_update_freq(),
the new policy limits may not take effect for a long time.
Likewise, the limits_changed update in sugov_limits() may theoretically
get reordered with respect to the updates of the policy limits in
cpufreq_set_policy() and if sugov_should_update_freq() runs between
them, the policy limits change may be missed.
To ensure that the above situations will not take place, add memory
barriers preventing the reordering in question from taking place and
add READ_ONCE() and WRITE_ONCE() annotations around all of the
limits_changed flag updates to prevent the compiler from messing up
with that code.
Fixes: 600f5badb7 ("cpufreq: schedutil: Don't skip freq update when limits change")
Cc: 5.3+ <stable@vger.kernel.org> # 5.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/3376719.44csPzL39Z@rjwysocki.net
[ bw_min => bw_dl ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cf761e3dac ]
Commit 7d5ec3d361 ("PCI/MSI: Mask all unused MSI-X entries") introduced a
readl() from ENTRY_VECTOR_CTRL before the writel() to ENTRY_DATA.
This is correct, however some hardware, like the Sun Neptune chips, the NIU
module, will cause an error and/or fatal trap if any MSIX table entry is
read before the corresponding ENTRY_DATA field is written to.
Add an optional early writel() in msix_prepare_msi_desc().
Fixes: 7d5ec3d361 ("PCI/MSI: Mask all unused MSI-X entries")
Signed-off-by: Jonathan Currier <dullfire@yahoo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241117234843.19236-2-dullfire@yahoo.com
[ Applied workaround to msix_setup_msi_descs() instead of msix_prepare_msi_desc() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b4efccec8d06ceb10a7d34d7b1c449c569d53770 ]
object_err() reports details of an object for further debugging, such as
the freelist pointer, redzone, etc. However, if the pointer is invalid,
attempting to access object metadata can lead to a crash since it does
not point to a valid object.
One known path to the crash is when alloc_consistency_checks()
determines the pointer to the allocated object is invalid because of a
freelist corruption, and calls object_err() to report it. The debug code
should report and handle the corruption gracefully and not crash in the
process.
In case the pointer is NULL or check_valid_pointer() returns false for
the pointer, only print the pointer value and skip accessing metadata.
Fixes: 81819f0fc8 ("SLUB core")
Cc: <stable@vger.kernel.org>
Signed-off-by: Li Qiong <liqiong@nfschina.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a7195a3d67dace056af7ca65144a11874df79562 upstream.
Correct the Mode Control Register (MODCTRL) offset for RZ/N MIIC.
According to the R-IN Engine and Ethernet Peripherals Manual (Rev.1.30)
[0], Table 10.1 "Ethernet Accessory Register List", MODCTRL is at offset
0x8, not 0x20 as previously defined.
Offset 0x20 actually maps to the Port Trigger Control Register (PTCTRL),
which controls PTP_MODE[3:0] and RGMII_CLKSEL[4]. Using this incorrect
definition prevented the driver from configuring the SW_MODE[4:0] bits
in MODCTRL, which control the internal connection of Ethernet ports. As
a result, the MIIC could not be switched into the correct mode, leading
to link setup failures and non-functional Ethernet ports on affected
systems.
[0] https://www.renesas.com/en/document/mah/rzn1d-group-rzn1s-group-rzn1l-group-users-manual-r-engine-and-ethernet-peripherals?r=1054571
Fixes: 7dc54d3b8d ("net: pcs: add Renesas MII converter driver")
Cc: stable@kernel.org
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20250901112019.16278-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90fb7db49c6dbac961c6b8ebfd741141ffbc8545 upstream.
Fix a possible heap overflow in e1000_set_eeprom function by adding
input validation for the requested length of the change in the EEPROM.
In addition, change the variable type from int to size_t for better
code practices and rearrange declarations to RCT.
Cc: stable@vger.kernel.org
Fixes: bc7f75fa97 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)")
Co-developed-by: Mikael Wessel <post@mikaelkw.online>
Signed-off-by: Mikael Wessel <post@mikaelkw.online>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70bccd9855dae56942f2b18a08ba137bb54093a0 upstream.
There can be a NULL pointer dereference bug here. NULL is passed to
__cifs_sfu_make_node without checks, which passes it unchecked to
cifs_strndup_to_utf16, which in turn passes it to
cifs_local_to_utf16_bytes where '*from' is dereferenced, causing a crash.
This patch adds a check for NULL 'src' in cifs_strndup_to_utf16 and
returns NULL early to prevent dereferencing NULL pointer.
Found by Linux Verification Center (linuxtesting.org) with SVACE
Signed-off-by: Makar Semyonov <m.semenov@tssltd.ru>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d77b6ff0ce35a6d0b0b7b9581bc3f76d041d4087 upstream.
batadv_nc_skb_decode_packet() trusts coded_len and checks only against
skb->len. XOR starts at sizeof(struct batadv_unicast_packet), reducing
payload headroom, and the source skb length is not verified, allowing an
out-of-bounds read and a small out-of-bounds write.
Validate that coded_len fits within the payload area of both destination
and source sk_buffs before XORing.
Fixes: 2df5278b02 ("batman-adv: network coding - receive coded packets and decode them")
Cc: stable@vger.kernel.org
Reported-by: Stanislav Fort <disclosure@aisle.com>
Signed-off-by: Stanislav Fort <stanislav.fort@aisle.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9dba9a45c348e8460da97c450cddf70b2056deb3 upstream.
Fix a use-after-free window by correcting the buffer release sequence in
the deferred receive path. The code freed the RQ buffer first and only
then cleared the context pointer under the lock. Concurrent paths (e.g.,
ABTS and the repost path) also inspect and release the same pointer under
the lock, so the old order could lead to double-free/UAF.
Note that the repost path already uses the correct pattern: detach the
pointer under the lock, then free it after dropping the lock. The
deferred path should do the same.
Fixes: 472e146d1c ("scsi: lpfc: Correct upcalling nvmet_fc transport during io done downcall")
Cc: stable@vger.kernel.org
Signed-off-by: John Evans <evans1210144@gmail.com>
Link: https://lore.kernel.org/r/20250828044008.743-1-evans1210144@gmail.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71403f58b4bb6c13b71c05505593a355f697fd94 upstream.
We already disable the audio pins in hw_fini so
there is no need to do it again in sw_fini.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4481
Cc: oushixiong <oushixiong1025@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5eeb16ca727f11278b2917fd4311a7d7efb0bbd6)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e20450829ca3c1dbc2db536391537c57a40fe0b upstream.
The adapter->chan_stats[] array is initialized in
mwifiex_init_channel_scan_gap() with vmalloc(), which doesn't zero out
memory. The array is filled in mwifiex_update_chan_statistics()
and then the user can query the data in mwifiex_cfg80211_dump_survey().
There are two potential issues here. What if the user calls
mwifiex_cfg80211_dump_survey() before the data has been filled in.
Also the mwifiex_update_chan_statistics() function doesn't necessarily
initialize the whole array. Since the array was not initialized at
the start that could result in an information leak.
Also this array is pretty small. It's a maximum of 900 bytes so it's
more appropriate to use kcalloc() instead vmalloc().
Cc: stable@vger.kernel.org
Fixes: bf35443314 ("mwifiex: channel statistics support for mwifiex")
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20250815023055.477719-1-rongqianfeng@vivo.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ce3d282bd5050fca8577defeff08ada0d55d062 upstream.
To avoid potential UAF issues during module removal races, we use
pde_set_flags() to save proc_ops flags in PDE itself before
proc_register(), and then use pde_has_proc_*() helpers instead of directly
dereferencing pde->proc_ops->*.
However, the pde_set_flags() call was missing when creating net related
proc files. This omission caused incorrect behavior which FMODE_LSEEK was
being cleared inappropriately in proc_reg_open() for net proc files. Lars
reported it in this link[1].
Fix this by ensuring pde_set_flags() is called when register proc entry,
and add NULL check for proc_ops in pde_set_flags().
[wangzijie1@honor.com: stash pde->proc_ops in a local const variable, per Christian]
Link: https://lkml.kernel.org/r/20250821105806.1453833-1-wangzijie1@honor.com
Link: https://lkml.kernel.org/r/20250818123102.959595-1-wangzijie1@honor.com
Link: https://lore.kernel.org/all/20250815195616.64497967@chagall.paradoxon.rec/ [1]
Fixes: ff7ec8dc1b ("proc: use the same treatment to check proc_lseek as ones for proc_read_iter et.al")
Signed-off-by: wangzijie <wangzijie1@honor.com>
Reported-by: Lars Wendler <polynomial-c@gmx.de>
Tested-by: Stefano Brivio <sbrivio@redhat.com>
Tested-by: Petr Vaněk <pv@excello.cz>
Tested by: Lars Wendler <polynomial-c@gmx.de>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Kirill A. Shutemov <k.shutemov@gmail.com>
Cc: wangzijie <wangzijie1@honor.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f46e8ef8bb7b452584f2e75337b619ac51a7cadf upstream.
Before calling ocfs2_delete_osb(), ocfs2_journal_shutdown() has already
been executed in ocfs2_dismount_volume(), so osb->journal must be NULL.
Therefore, the following calltrace will inevitably fail when it reaches
jbd2_journal_release_jbd_inode().
ocfs2_dismount_volume()->
ocfs2_delete_osb()->
ocfs2_free_slot_info()->
__ocfs2_free_slot_info()->
evict()->
ocfs2_evict_inode()->
ocfs2_clear_inode()->
jbd2_journal_release_jbd_inode(osb->journal->j_journal,
Adding osb->journal checks will prevent null-ptr-deref during the above
execution path.
Link: https://lkml.kernel.org/r/tencent_357489BEAEE4AED74CBD67D246DBD2C4C606@qq.com
Fixes: da5e7c8782 ("ocfs2: cleanup journal init and shutdown")
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Reported-by: syzbot+47d8cb2f2cc1517e515a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=47d8cb2f2cc1517e515a
Tested-by: syzbot+47d8cb2f2cc1517e515a@syzkaller.appspotmail.com
Reviewed-by: Mark Tinguely <mark.tinguely@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7cc183f2e67d19b03ee5c13a6664b8c6cc37ff9d upstream.
During our internal testing, we started observing intermittent boot
failures when the machine uses 4-level paging and has a large amount of
persistent memory:
BUG: unable to handle page fault for address: ffffe70000000034
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP NOPTI
RIP: 0010:__init_single_page+0x9/0x6d
Call Trace:
<TASK>
__init_zone_device_page+0x17/0x5d
memmap_init_zone_device+0x154/0x1bb
pagemap_range+0x2e0/0x40f
memremap_pages+0x10b/0x2f0
devm_memremap_pages+0x1e/0x60
dev_dax_probe+0xce/0x2ec [device_dax]
dax_bus_probe+0x6d/0xc9
[... snip ...]
</TASK>
It turns out that the kernel panics while initializing vmemmap (struct
page array) when the vmemmap region spans two PGD entries, because the new
PGD entry is only installed in init_mm.pgd, but not in the page tables of
other tasks.
And looking at __populate_section_memmap():
if (vmemmap_can_optimize(altmap, pgmap))
// does not sync top level page tables
r = vmemmap_populate_compound_pages(pfn, start, end, nid, pgmap);
else
// sync top level page tables in x86
r = vmemmap_populate(start, end, nid, altmap);
In the normal path, vmemmap_populate() in arch/x86/mm/init_64.c
synchronizes the top level page table (See commit 9b861528a8 ("x86-64,
mem: Update all PGDs for direct mapping and vmemmap mapping changes")) so
that all tasks in the system can see the new vmemmap area.
However, when vmemmap_can_optimize() returns true, the optimized path
skips synchronization of top-level page tables. This is because
vmemmap_populate_compound_pages() is implemented in core MM code, which
does not handle synchronization of the top-level page tables. Instead,
the core MM has historically relied on each architecture to perform this
synchronization manually.
We're not the first party to encounter a crash caused by not-sync'd top
level page tables: earlier this year, Gwan-gyeong Mun attempted to address
the issue [1] [2] after hitting a kernel panic when x86 code accessed the
vmemmap area before the corresponding top-level entries were synced. At
that time, the issue was believed to be triggered only when struct page
was enlarged for debugging purposes, and the patch did not get further
updates.
It turns out that current approach of relying on each arch to handle the
page table sync manually is fragile because 1) it's easy to forget to sync
the top level page table, and 2) it's also easy to overlook that the
kernel should not access the vmemmap and direct mapping areas before the
sync.
# The solution: Make page table sync more code robust and harder to miss
To address this, Dave Hansen suggested [3] [4] introducing
{pgd,p4d}_populate_kernel() for updating kernel portion of the page tables
and allow each architecture to explicitly perform synchronization when
installing top-level entries. With this approach, we no longer need to
worry about missing the sync step, reducing the risk of future
regressions.
The new interface reuses existing ARCH_PAGE_TABLE_SYNC_MASK,
PGTBL_P*D_MODIFIED and arch_sync_kernel_mappings() facility used by
vmalloc and ioremap to synchronize page tables.
pgd_populate_kernel() looks like this:
static inline void pgd_populate_kernel(unsigned long addr, pgd_t *pgd,
p4d_t *p4d)
{
pgd_populate(&init_mm, pgd, p4d);
if (ARCH_PAGE_TABLE_SYNC_MASK & PGTBL_PGD_MODIFIED)
arch_sync_kernel_mappings(addr, addr);
}
It is worth noting that vmalloc() and apply_to_range() carefully
synchronizes page tables by calling p*d_alloc_track() and
arch_sync_kernel_mappings(), and thus they are not affected by this patch
series.
This series was hugely inspired by Dave Hansen's suggestion and hence
added Suggested-by: Dave Hansen.
Cc stable because lack of this series opens the door to intermittent
boot failures.
This patch (of 3):
Move ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() to
linux/pgtable.h so that they can be used outside of vmalloc and ioremap.
Link: https://lkml.kernel.org/r/20250818020206.4517-1-harry.yoo@oracle.com
Link: https://lkml.kernel.org/r/20250818020206.4517-2-harry.yoo@oracle.com
Link: https://lore.kernel.org/linux-mm/20250220064105.808339-1-gwan-gyeong.mun@intel.com [1]
Link: https://lore.kernel.org/linux-mm/20250311114420.240341-1-gwan-gyeong.mun@intel.com [2]
Link: https://lore.kernel.org/linux-mm/d1da214c-53d3-45ac-a8b6-51821c5416e4@intel.com [3]
Link: https://lore.kernel.org/linux-mm/4d800744-7b88-41aa-9979-b245e8bf794b@intel.com [4]
Fixes: 8d400913c2 ("x86/vmemmap: handle unpopulated sub-pmd ranges")
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: Kiryl Shutsemau <kas@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: bibo mao <maobibo@loongson.cn>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Christoph Lameter (Ampere) <cl@gentwo.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
