commit c7c31f8dc54aa3c9b2c994b5f1ff7e740a654e97 upstream.
The busy-waiting in `mdelay()` can cause CPU stalls and kernel timeouts
during boot.
Signed-off-by: Nirmoy Das <nirmoyd@nvidia.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Carol L Soto csoto@nvidia.com<mailto:csoto@nvidia.com>
Fixes: 594e9c04b5 ("drm/ast: Create the driver for ASPEED proprietory Display-Port")
Cc: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.19+
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250917194346.2905522-1-nirmoyd@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 77c8ede611c6a70a95f7b15648551d0121b40d6c upstream.
We were copying the bo content the bos on the list
"xe->pinned.late.kernel_bo_present" twice on suspend.
Presumingly the intent is to copy the pinned external bos on
the first pass.
This is harmless since we (currently) should have no pinned
external bos needing copy since
a) exernal system bos don't have compressed content,
b) We do not (yet) allow pinning of VRAM bos.
Still, fix this up so that we copy pinned external bos on
the first pass. We're about to allow bos pinned in VRAM.
Fixes: c6a4d46ec1 ("drm/xe: evict user memory in PM notifier")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v6.16+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250918092207.54472-2-thomas.hellstrom@linux.intel.com
(cherry picked from commit 9e69bafece43dcefec864f00b3ec7e088aa7fcbc)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 794a066688038df46c01e177cc6faebded0acba4 upstream.
The mvebu-comphy driver does not currently know how to pass correct
lane-count to ATF while configuring the serdes lanes.
This causes the system to hard reset during reconfiguration, if a pci
card is present and has established a link during bootloader.
Remove the comphy handles from the respective pci nodes to avoid runtime
reconfiguration, relying solely on bootloader configuration - while
avoiding the hard reset.
When bootloader has configured the lanes correctly, the pci ports are
functional under Linux.
This issue may be addressed in the comphy driver at a future point.
Fixes: e9ff907f40 ("arm64: dts: add description for solidrun cn9132 cex7 module and clearfog board")
Cc: stable@vger.kernel.org
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 48b51799a5461707705454568453618cdd7307f4 upstream.
Similar to MacchiatoBIN the high-speed modes are unstable on the CN9132
CEX-7 module, leading to failed transactions under normal use.
Disable all high-speed modes including UHS.
Additionally add no-sdio and non-removable properties as appropriate for
eMMC.
Fixes: e9ff907f40 ("arm64: dts: add description for solidrun cn9132 cex7 module and clearfog board")
Cc: stable@vger.kernel.org
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3021e6aa11fecdafa85038a037c04d5bfeda9d5 upstream.
Commit "arm64: dts: marvell: only enable complete sata nodes" changed
armada-cp11x.dtsi disabling all sata ports status by default.
The author missed some dts which relied on the dtsi enabling all ports,
and just disabled unused ones instead.
Update dts for SolidRun cn913x based boards to enable the available
ports, rather than disabling the unvavailable one.
Further according to dt bindings the serdes phys are to be specified in
the port node, not the controller node.
Move those phys properties accordingly in clearfog base/pro/solidwan.
Fixes: 30023876ae ("arm64: dts: marvell: only enable complete sata nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea9da67e2add7bd5f1e4b38dc2404480e711f4d8 upstream.
On SoCFPGA/Sodia board, mdio bus cannot be probed, so the PHY cannot be
found and the network device does not work.
```
stmmaceth ff702000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -19)
```
To probe the mdio bus, add "snps,dwmac-mdio" as compatible string of the
mdio bus. Also the PHY address connected to this board is 4. Therefore,
change to 4.
Cc: stable@vger.kernel.org # 6.3+
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c539feff3c8f8c86213eee2b237410714712c326 upstream.
Even if there is a memory allocation failure in fprobe_addr_list_add(),
there is a partial list of module addresses. So remove the recorded
addresses from filter if exists.
This also removes the redundant ret local variable.
Fixes: a3dc2983ca ("tracing: fprobe: Cleanup fprobe hash when module unloading")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Menglong Dong <menglong8.dong@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0db0934e7f9bb624ed98a665890dbe249f65b8fd upstream.
function_graph_enter_regs() prevents itself from recursion by
ftrace_test_recursion_trylock(), but __ftrace_return_to_handler(),
which is called at the exit, does not prevent such recursion.
Therefore, while it can prevent recursive calls from
fgraph_ops::entryfunc(), it is not able to prevent recursive calls
to fgraph from fgraph_ops::retfunc(), resulting in a recursive loop.
This can lead an unexpected recursion bug reported by Menglong.
is_endbr() is called in __ftrace_return_to_handler -> fprobe_return
-> kprobe_multi_link_exit_handler -> is_endbr.
To fix this issue, acquire ftrace_test_recursion_trylock() in the
__ftrace_return_to_handler() after unwind the shadow stack to mark
this section must prevent recursive call of fgraph inside user-defined
fgraph_ops::retfunc().
This is essentially a fix to commit 4346ba1604 ("fprobe: Rewrite
fprobe on function-graph tracer"), because before that fgraph was
only used from the function graph tracer. Fprobe allowed user to run
any callbacks from fgraph after that commit.
Reported-by: Menglong Dong <menglong8.dong@gmail.com>
Closes: https://lore.kernel.org/all/20250918120939.1706585-1-dongml2@chinatelecom.cn/
Fixes: 4346ba1604 ("fprobe: Rewrite fprobe on function-graph tracer")
Cc: stable@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/175852292275.307379.9040117316112640553.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Menglong Dong <menglong8.dong@gmail.com>
Acked-by: Menglong Dong <menglong8.dong@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 456c32e3c4316654f95f9d49c12cbecfb77d5660 upstream.
Since dynamic_events interface on tracefs is compatible with
kprobe_events and uprobe_events, it should also check the lockdown
status and reject if it is set.
Link: https://lore.kernel.org/all/175824455687.45175.3734166065458520748.stgit@devnote2/
Fixes: 17911ff38a ("tracing: Add locked_down checks to the open calls of files created for tracefs")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0ca0df179c4b21e2a6c4a4fb637aa8fa14575cb upstream.
Commit 1b34cbbf4f01 ("crypto: af_alg - Disallow concurrent writes in
af_alg_sendmsg") changed some fields from bool to 1-bit bitfields of
type u32.
However, some assignments to these fields, specifically 'more' and
'merge', assign values greater than 1. These relied on C's implicit
conversion to bool, such that zero becomes false and nonzero becomes
true.
With a 1-bit bitfields of type u32 instead, mod 2 of the value is taken
instead, resulting in 0 being assigned in some cases when 1 was intended.
Fix this by restoring the bool type.
Fixes: 1b34cbbf4f01 ("crypto: af_alg - Disallow concurrent writes in af_alg_sendmsg")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b99dd77076bd3fddac6f7f1cbfa081c38fde17f5 upstream.
When adding new VM MAC, driver checks only *active* filters in
vsi->mac_filter_hash. Each MAC, even in non-active state is using resources.
To determine number of MACs VM uses, count VSI filters in *any* state.
Add i40e_count_all_filters() to simply count all filters, and rename
i40e_count_filters() to i40e_count_active_filters() to avoid ambiguity.
Fixes: cfb1d572c9 ("i40e: Add ensurance of MacVlan resources for every trusted VF")
Cc: stable@vger.kernel.org
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eac04428abe9f9cb203ffae4600791ea1d24eb18 upstream.
The ITR index (itr_idx) is only 2 bits wide. When constructing the
register value for QINT_RQCTL, all fields are ORed together. Without
masking, higher bits from itr_idx may overwrite adjacent fields in the
register.
Apply I40E_QINT_RQCTL_ITR_INDX_MASK to ensure only the intended bits are
set.
Fixes: 5c3c48ac6b ("i40e: implement virtual device interface")
Cc: stable@vger.kernel.org
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cb79fa7118c150c3c76a327894bb2eb878c02619 upstream.
There is no check for max filters that VF can request. Add it.
Fixes: e284fc2804 ("i40e: Add and delete cloud filter")
Cc: stable@vger.kernel.org
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 877b7e6ffc23766448236e8732254534c518ba42 upstream.
VF state I40E_VF_STATE_ACTIVE is not the only state in which
VF is actually active so it should not be used to determine
if a VF is allowed to obtain resources.
Use I40E_VF_STATE_RESOURCES_LOADED that is set only in
i40e_vc_get_vf_resources_msg() and cleared during reset.
Fixes: 61125b8be8 ("i40e: Fix failed opcode appearing if handling messages from VF")
Cc: stable@vger.kernel.org
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f1ad24c5abe1eaef69158bac1405a74b3c365115 upstream.
Ensure idx is within range of active/initialized TCs when iterating over
vf->ch[idx] in i40e_vc_config_queues_msg().
Fixes: c27eac4816 ("i40e: Enable ADq and create queue channel/s on VF")
Cc: stable@vger.kernel.org
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Kamakshi Nellore <nellorex.kamakshi@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa68d3c3ac8d1dcec40d52ae27e39f6d32207009 upstream.
Ensure idx is within range of active/initialized TCs when iterating over
vf->ch[idx] in i40e_validate_queue_map().
Fixes: c27eac4816 ("i40e: Enable ADq and create queue channel/s on VF")
Cc: stable@vger.kernel.org
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Kamakshi Nellore <nellorex.kamakshi@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55d225670def06b01af2e7a5e0446fbe946289e8 upstream.
The `ring_len` parameter provided by the virtual function (VF)
is assigned directly to the hardware memory context (HMC) without
any validation.
To address this, introduce an upper boundary check for both Tx and Rx
queue lengths. The maximum number of descriptors supported by the
hardware is 8k-32.
Additionally, enforce alignment constraints: Tx rings must be a multiple
of 8, and Rx rings must be a multiple of 32.
Fixes: 5c3c48ac6b ("i40e: implement virtual device interface")
Cc: stable@vger.kernel.org
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 831f70a5b93bd2d9e858ced2c12fab5766ede5e7 upstream.
Add support for missing hotkey keycodes affecting Asus PX13 and PX16 families
so userspace can use them.
Signed-off-by: Amit Chaudhari <amitchaudhari@mac.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a2501032de0d1bc7971b2e43c03da534ac10ee9b ]
When config osnoise cpus by write() syscall, the following KASAN splat may
be observed:
BUG: KASAN: slab-out-of-bounds in _parse_integer_limit+0x103/0x130
Read of size 1 at addr ffff88810121e3a1 by task test/447
CPU: 1 UID: 0 PID: 447 Comm: test Not tainted 6.17.0-rc6-dirty #288 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x55/0x70
print_report+0xcb/0x610
kasan_report+0xb8/0xf0
_parse_integer_limit+0x103/0x130
bitmap_parselist+0x16d/0x6f0
osnoise_cpus_write+0x116/0x2d0
vfs_write+0x21e/0xcc0
ksys_write+0xee/0x1c0
do_syscall_64+0xa8/0x2a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This issue can be reproduced by below code:
const char *cpulist = "1";
int fd=open("/sys/kernel/debug/tracing/osnoise/cpus", O_WRONLY);
write(fd, cpulist, strlen(cpulist));
Function bitmap_parselist() was called to parse cpulist, it require that
the parameter 'buf' must be terminated with a '\0' or '\n'. Fix this issue
by adding a '\0' to 'buf' in osnoise_cpus_write().
Cc: <mhiramat@kernel.org>
Cc: <mathieu.desnoyers@efficios.com>
Cc: <tglozar@redhat.com>
Link: https://lore.kernel.org/20250916063948.3154627-1-wangliang74@huawei.com
Fixes: 17f89102fe ("tracing/osnoise: Allow arbitrarily long CPU string")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fbe2dc6a9c7318f7263f5e4d50f6272b931c5756 ]
In smb2_compound_op(), the loop that processes each command's response
uses wrong indices when accessing response bufferes.
This incorrect indexing leads to improper handling of command results.
Also, if incorrectly computed index is greather than or equal to
MAX_COMPOUND, it can cause out-of-bounds accesses.
Fixes: 3681c74d34 ("smb: client: handle lack of EA support in smb2_query_path_info()") # 6.14
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ed17349f18774c24505b0c21dfbd3cc4f126518 ]
When WMAB is called to set the fan mode, the new mode is read from either
bits 0-1 or bits 4-5 (depending on the value of some other EC register).
Thus when WMAB is called with bits 4-5 zeroed and called again with
bits 0-1 zeroed, the second call undoes the effect of the first call.
This causes writes to /sys/devices/platform/lg-laptop/fan_mode to have
no effect (and causes reads to always report a status of zero).
Fix this by calling WMAB once, with the mode set in bits 0,1 and 4,5.
When the fan mode is returned from WMAB it always has this form, so
there is no need to preserve the other bits. As a bonus, the driver
now supports the "Performance" fan mode seen in the LG-provided Windows
control app, which provides less aggressive CPU throttling but louder
fan noise and shorter battery life.
Also, correct the documentation to reflect that 0 corresponds to the
default mode (what the Windows app calls "Optimal") and 1 corresponds
to the silent mode.
Fixes: dbf0c5a6b1 ("platform/x86: Add LG Gram laptop special features driver")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=204913#c4
Signed-off-by: Daniel Lee <dany97@live.ca>
Link: https://patch.msgid.link/MN2PR06MB55989CB10E91C8DA00EE868DDC1CA@MN2PR06MB5598.namprd06.prod.outlook.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d9c3442b02ab7dd3c44e20095a178fd57d2eccb ]
Commit de85488138 ("drm/panthor: Add the scheduler logical block")
handled destruction of a group's queues' drm scheduler entities early
into the group destruction procedure.
However, that races with the group submit ioctl, because by the time
entities are destroyed (through the group destroy ioctl), the submission
procedure might've already obtained a group handle, and therefore the
ability to push jobs into entities. This is met with a DRM error message
within the drm scheduler core as a situation that should never occur.
Fix by deferring drm scheduler entity destruction to queue release time.
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250919164436.531930-1-adrian.larumbe@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ec3c15462b9f44562f45723a92e2807746ba7d1 ]
copy_process() uses the wrong error exit path from futex_hash_allocate_default().
After exiting from futex_hash_allocate_default(), neither tasklist_lock
nor siglock has been acquired. The exit label bad_fork_core_free unlocks
both of these locks which is wrong.
The next exit label, bad_fork_cancel_cgroup, is the correct exit.
sched_cgroup_fork() did not allocate any resources that need to freed.
Use bad_fork_cancel_cgroup on error exit from futex_hash_allocate_default().
Fixes: 7c4f75a21f ("futex: Allow automatic allocation of process wide futex hash")
Reported-by: syzbot+80cb3cc5c14fad191a10@syzkaller.appspotmail.com
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Closes: https://lore.kernel.org/all/68cb1cbd.050a0220.2ff435.0599.GAE@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41b1f9fcba62b06195e625bb88c1031102892439 ]
Remove this flag as the driver stopped managing it individually since
commit a4056c2a63 ("drm/amd/display: use HW hdr mult for brightness
boost"). After some back and forth it was reintroduced as a condition to
`set_output_transfer_func()` in [1]. Without direct management, this
flag only changes value when all surface update flags are set true on
UPDATE_TYPE_FULL with no output TF status meaning.
Fixes: bb622e0c00 ("drm/amd/display: program output tf when required") [1]
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 752e6f283ec59ae007aa15a93d5a4b2eefa8cec9)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f97a0a871d9532f2e1a5ee7d16d0e364215bcac ]
Currently we check if the encoder is INVALID or -1 and throw a
WARN_ON but we still end up writing the temp value which will
overflow and corrupt the whole programmed value.
--v2
-Assign a bogus transcoder to master in case we get a INVALID
TRANSCODER [Jani]
Fixes: 6671c367a9 ("drm/i915/tgl: Select master transcoder for MST stream")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250908042208.1011144-1-suraj.kandpal@intel.com
(cherry picked from commit c8e8e9ab14a6ea926641d161768e1e3ef286a853)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b67e7422d229dead0dddaad7e7c05558f24d552f ]
When building with CONFIG_MODULES=n, the __exit functions are dropped.
However our init functions may call them for error handling, so they are
not good candidates for the exit sections.
Fix this error reported by 0day:
ld.lld: error: relocation refers to a symbol in a discarded section: xe_configfs_exit
>>> defined in vmlinux.a(drivers/gpu/drm/xe/xe_configfs.o)
>>> referenced by xe_module.c
>>> drivers/gpu/drm/xe/xe_module.o:(init_funcs) in archive vmlinux.a
This is the only exit function using __exit. Drop it to fix the build.
Cc: Riana Tauro <riana.tauro@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506092221.1FmUQmI8-lkp@intel.com/
Fixes: 16280ded45 ("drm/xe: Add configfs to enable survivability mode")
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://lore.kernel.org/r/20250912-fix-nomodule-build-v1-1-d11b70a92516@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit d9b2623319fa20c2206754284291817488329648)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3bd44edd6c55828fd4e11cb0efce5b7160bfa2de ]
The gpio_regmap structure is leaked on the error path. Fix this by
jumping to the appropriate kfree instead of returning directly.
Fixes: db30516188 ("gpio: regmap: Allow ngpio to be read from the property")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Suggested-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20250922142427.3310221-7-ioana.ciornei@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b549113738e8c751b613118032a724b772aa83f2 ]
syzbot managed to trigger the following race:
T1 T2
futex_wait_requeue_pi()
futex_do_wait()
schedule()
futex_requeue()
futex_proxy_trylock_atomic()
futex_requeue_pi_prepare()
requeue_pi_wake_futex()
futex_requeue_pi_complete()
/* preempt */
* timeout/ signal wakes T1 *
futex_requeue_pi_wakeup_sync() // Q_REQUEUE_PI_LOCKED
futex_hash_put()
// back to userland, on stack futex_q is garbage
/* back */
wake_up_state(q->task, TASK_NORMAL);
In this scenario futex_wait_requeue_pi() is able to leave without using
futex_q::lock_ptr for synchronization.
This can be prevented by reading futex_q::task before updating the
futex_q::requeue_state. A reference on the task_struct is not needed
because requeue_pi_wake_futex() is invoked with a spinlock_t held which
implies a RCU read section.
Even if T1 terminates immediately after, the task_struct will remain valid
during T2's wake_up_state(). A READ_ONCE on futex_q::task before
futex_requeue_pi_complete() is enough because it ensures that the variable
is read before the state is updated.
Read futex_q::task before updating the requeue state, use it for the
following wakeup.
Fixes: 07d91ef510 ("futex: Prevent requeue_pi() lock nesting issue on RT")
Reported-by: syzbot+034246a838a10d181e78@syzkaller.appspotmail.com
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Closes: https://lore.kernel.org/all/68b75989.050a0220.3db4df.01dd.GAE@google.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 352e66900cde63f3dadb142364d3c35170bbaaff ]
pci_set_drvdata sets the value of pdev->driver_data to NULL,
after which the driver_data obtained from the same dev is
dereferenced in oaktrail_hdmi_i2c_exit, and the i2c_dev is
extracted from it. To prevent this, swap these calls.
Found by Linux Verification Center (linuxtesting.org) with Svacer.
Fixes: 1b082ccf59 ("gma500: Add Oaktrail support")
Signed-off-by: Zabelin Nikita <n.zabelin@mt-integration.ru>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250918150703.2562604-1-n.zabelin@mt-integration.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9c70e93ec5988ab07ad2a92d9f9d12867f02c56 ]
This code calls kfree_rcu(new_node, rcu) and then dereferences "new_node"
and then dereferences it on the next line. Two lines later, we take
a mutex so I don't think this is an RCU safe region. Re-order it to do
the dereferences before queuing up the free.
Fixes: 68fbff68db ("octeontx2-pf: Add police action for TC flower")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/aNKCL1jKwK8GRJHh@stanley.mountain
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 987afe147965ef7a8e7d144ffef0d70af14bb1d4 ]
The blamed commit and others in that patch set started the trend
of reusing existing DSA driver API for a new purpose: calling
ds->ops->port_fdb_add() on the CPU port.
The lantiq_gswip driver was not prepared to handle that, as can be seen
from the many errors that Daniel presents in the logs:
[ 174.050000] gswip 1e108000.switch: port 2 failed to add fa:aa:72:f4:8b:1e vid 1 to fdb: -22
[ 174.060000] gswip 1e108000.switch lan2: entered promiscuous mode
[ 174.070000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 0 to fdb: -22
[ 174.090000] gswip 1e108000.switch: port 2 failed to add 00:01:02:03:04:02 vid 1 to fdb: -22
[ 174.090000] gswip 1e108000.switch: port 2 failed to delete fa:aa:72:f4:8b:1e vid 1 from fdb: -2
The errors are because gswip_port_fdb() wants to get a handle to the
bridge that originated these FDB events, to associate it with a FID.
Absolutely honourable purpose, however this only works for user ports.
To get the bridge that generated an FDB entry for the CPU port, one
would need to look at the db.bridge.dev argument. But this was
introduced in commit c26933639b ("net: dsa: request drivers to perform
FDB isolation"), first appeared in v5.18, and when the blamed commit was
introduced in v5.14, no such API existed.
So the core DSA feature was introduced way too soon for lantiq_gswip.
Not acting on these host FDB entries and suppressing any errors has no
other negative effect, and practically returns us to not supporting the
host filtering feature at all - peacefully, this time.
Fixes: 10fae4ac89 ("net: dsa: include bridge addresses which are local in the host fdb list")
Reported-by: Daniel Golle <daniel@makrotopia.org>
Closes: https://lore.kernel.org/netdev/aJfNMLNoi1VOsPrN@pidgin.makrotopia.org/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250918072142.894692-3-vladimir.oltean@nxp.com
Tested-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0054b25e2f1045f47b4954cf13a539e5e6047df ]
A port added to a "single port bridge" operates as standalone, and this
is mutually exclusive to being part of a Linux bridge. In fact,
gswip_port_bridge_join() calls gswip_add_single_port_br() with
add=false, i.e. removes the port from the "single port bridge" to enable
autonomous forwarding.
The blamed commit seems to have incorrectly thought that ds->ops->port_enable()
is called one time per port, during the setup phase of the switch.
However, it is actually called during the ndo_open() implementation of
DSA user ports, which is to say that this sequence of events:
1. ip link set swp0 down
2. ip link add br0 type bridge
3. ip link set swp0 master br0
4. ip link set swp0 up
would cause swp0 to join back the "single port bridge" which step 3 had
just removed it from.
The correct DSA hook for one-time actions per port at switch init time
is ds->ops->port_setup(). This is what seems to match the coder's
intention; also see the comment at the beginning of the file:
* At the initialization the driver allocates one bridge table entry for
~~~~~~~~~~~~~~~~~~~~~
* each switch port which is used when the port is used without an
* explicit bridge.
Fixes: 8206e0ce96 ("net: dsa: lantiq: Add VLAN unaware bridge offloading")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250918072142.894692-2-vladimir.oltean@nxp.com
Tested-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d0477d0d067a53c1d48d0aff1fd52e151721871 ]
Include MLX5E_FEC_RS_544_514_INTERLEAVED_QUAD in the FEC RS stats
handling. This addresses a gap introduced when adding support for
200G/lane link modes.
Fixes: 4e343c11ef ("net/mlx5e: Support FEC settings for 200G per lane link modes")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Yael Chemla <ychemla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1758525094-816583-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efb877cf27e300e47e1c051f4e8fd80fc42325d5 ]
When HWS creates multi-dest FW table and adds rules to
forward to other tables, ignore the flow level enforcement
in FW, because HWS is responsible for table levels.
This fixes the following error:
mlx5_core 0000:08:00.0: mlx5_cmd_out_err:818:(pid 192306):
SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed,
status bad parameter(0x3), syndrome (0x6ae84c), err(-22)
Fixes: 504e536d90 ("net/mlx5: HWS, added actions handling")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1758525094-816583-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c29913109c70383cdf90b6fc792353e1009f24f5 ]
The test creates non-FDB nexthops without a nexthop device which leads
to the expected failure, but for the wrong reason:
# ./fib_nexthops.sh -t "ipv6_fdb_grp_fcnal ipv4_fdb_grp_fcnal" -v
IPv6 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-nRsN3E nexthop add id 63 via 2001:db8:91::4
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 64 via 2001:db8:91::5
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 103 group 63/64 fdb
Error: Invalid nexthop id.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
[...]
IPv4 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-nRsN3E nexthop add id 14 via 172.16.1.2
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 15 via 172.16.1.3
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 103 group 14/15 fdb
Error: Invalid nexthop id.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
COMMAND: ip -netns me-nRsN3E nexthop add id 16 via 172.16.1.2 fdb
COMMAND: ip -netns me-nRsN3E nexthop add id 17 via 172.16.1.3 fdb
COMMAND: ip -netns me-nRsN3E nexthop add id 104 group 14/15
Error: Invalid nexthop id.
TEST: Non-Fdb Nexthop group with fdb nexthops [ OK ]
[...]
COMMAND: ip -netns me-0dlhyd ro add 172.16.0.0/22 nhid 15
Error: Nexthop id does not exist.
TEST: Route add with fdb nexthop [ OK ]
In addition, as can be seen in the above output, a couple of IPv4 test
cases used the non-FDB nexthops (14 and 15) when they intended to use
the FDB nexthops (16 and 17). These test cases only passed because
failure was expected, but they failed for the wrong reason.
Fix the test to create the non-FDB nexthops with a nexthop device and
adjust the IPv4 test cases to use the FDB nexthops instead of the
non-FDB nexthops.
Output after the fix:
# ./fib_nexthops.sh -t "ipv6_fdb_grp_fcnal ipv4_fdb_grp_fcnal" -v
IPv6 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-lNzfHP nexthop add id 63 via 2001:db8:91::4 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 64 via 2001:db8:91::5 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 103 group 63/64 fdb
Error: FDB nexthop group can only have fdb nexthops.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
[...]
IPv4 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-lNzfHP nexthop add id 14 via 172.16.1.2 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 15 via 172.16.1.3 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 103 group 14/15 fdb
Error: FDB nexthop group can only have fdb nexthops.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
COMMAND: ip -netns me-lNzfHP nexthop add id 16 via 172.16.1.2 fdb
COMMAND: ip -netns me-lNzfHP nexthop add id 17 via 172.16.1.3 fdb
COMMAND: ip -netns me-lNzfHP nexthop add id 104 group 16/17
Error: Non FDB nexthop group cannot have fdb nexthops.
TEST: Non-Fdb Nexthop group with fdb nexthops [ OK ]
[...]
COMMAND: ip -netns me-lNzfHP ro add 172.16.0.0/22 nhid 16
Error: Route cannot point to a fdb nexthop.
TEST: Route add with fdb nexthop [ OK ]
[...]
Tests passed: 30
Tests failed: 0
Tests skipped: 0
Fixes: 0534c5489c ("selftests: net: add fdb nexthop tests")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250921150824.149157-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 390b3a300d7872cef9588f003b204398be69ce08 ]
The kernel forbids the creation of non-FDB nexthop groups with FDB
nexthops:
# ip nexthop add id 1 via 192.0.2.1 fdb
# ip nexthop add id 2 group 1
Error: Non FDB nexthop group cannot have fdb nexthops.
And vice versa:
# ip nexthop add id 3 via 192.0.2.2 dev dummy1
# ip nexthop add id 4 group 3 fdb
Error: FDB nexthop group can only have fdb nexthops.
However, as long as no routes are pointing to a non-FDB nexthop group,
the kernel allows changing the type of a nexthop from FDB to non-FDB and
vice versa:
# ip nexthop add id 5 via 192.0.2.2 dev dummy1
# ip nexthop add id 6 group 5
# ip nexthop replace id 5 via 192.0.2.2 fdb
# echo $?
0
This configuration is invalid and can result in a NPD [1] since FDB
nexthops are not associated with a nexthop device:
# ip route add 198.51.100.1/32 nhid 6
# ping 198.51.100.1
Fix by preventing nexthop FDB status change while the nexthop is in a
group:
# ip nexthop add id 7 via 192.0.2.2 dev dummy1
# ip nexthop add id 8 group 7
# ip nexthop replace id 7 via 192.0.2.2 fdb
Error: Cannot change nexthop FDB status while in a group.
[1]
BUG: kernel NULL pointer dereference, address: 00000000000003c0
[...]
Oops: Oops: 0000 [#1] SMP
CPU: 6 UID: 0 PID: 367 Comm: ping Not tainted 6.17.0-rc6-virtme-gb65678cacc03 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014
RIP: 0010:fib_lookup_good_nhc+0x1e/0x80
[...]
Call Trace:
<TASK>
fib_table_lookup+0x541/0x650
ip_route_output_key_hash_rcu+0x2ea/0x970
ip_route_output_key_hash+0x55/0x80
__ip4_datagram_connect+0x250/0x330
udp_connect+0x2b/0x60
__sys_connect+0x9c/0xd0
__x64_sys_connect+0x18/0x20
do_syscall_64+0xa4/0x2a0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: 38428d6871 ("nexthop: support for fdb ecmp nexthops")
Reported-by: syzbot+6596516dd2b635ba2350@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68c9a4d2.050a0220.3c6139.0e63.GAE@google.com/
Tested-by: syzbot+6596516dd2b635ba2350@syzkaller.appspotmail.com
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250921150824.149157-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca9f9cdc4de97d0221100b11224738416696163c ]
Currently, alloc_skb_with_frags() will only fill (MAX_SKB_FRAGS - 1)
slots. I think it should use all MAX_SKB_FRAGS slots, as callers of
alloc_skb_with_frags() will size their allocation of frags based
on MAX_SKB_FRAGS.
This issue was discovered via a test patch that sets 'order' to 0
in alloc_skb_with_frags(), which effectively tests/simulates high
fragmentation. In this case sendmsg() on unix sockets will fail every
time for large allocations. If the PAGE_SIZE is 4K, then data_len will
request 68K or 17 pages, but alloc_skb_with_frags() can only allocate
64K in this case or 16 pages.
Fixes: 09c2c90705 ("net: allow alloc_skb_with_frags() to allocate bigger packets")
Signed-off-by: Jason Baron <jbaron@akamai.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250922191957.2855612-1-jbaron@akamai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d3aa9472c6dd0704e9961ed4769caac5b1c8d52 ]
In bnxt_tc_parse_pedit(), the code incorrectly writes IPv6
destination values to the source address field (saddr) when
processing pedit offsets within the destination address range.
This patch corrects the assignment to use daddr instead of saddr,
ensuring that pedit operations on IPv6 destination addresses are
applied correctly.
Fixes: 9b9eb518e3 ("bnxt_en: Add support for NAT(L3/L4 rewrite)")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Link: https://patch.msgid.link/20250920121157.351921-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3200fdd4021de1d182fa3b6db5ad936d519f3848 ]
Commit 7c571ac57d ("net: ptp: introduce .supported_extts_flags to
ptp_clock_info") modified the PTP core kernel logic to validate the
supported flags for the PTP_EXTTS_REQUEST ioctls, rather than relying on
each individual driver correctly checking its flags.
The bcm_ptp_enable() function implements support for PTP_CLK_REQ_EXTTS, but
does not check the flags, and does not forward the request structure into
bcm_ptp_extts_locked().
When originally converting the bcm-phy-ptp.c code, it was unclear what
edges the hardware actually timestamped. Thus, no flags were initialized in
the .supported_extts_flags field. This results in the kernel automatically
rejecting all userspace requests for the PTP_EXTTS_REQUEST2 ioctl.
This occurs because the PTP_STRICT_FLAGS is always assumed when operating
under PTP_EXTTS_REQUEST2. This has been the case since the flags
introduction by commit 6138e687c7 ("ptp: Introduce strict checking of
external time stamp options.").
The bcm-phy-ptp.c logic never properly supported strict flag validation,
as it previously ignored all flags including both PTP_STRICT_FLAGS and the
PTP_FALLING_EDGE and PTP_RISING_EDGE flags.
Reports from users in the field prove that the hardware timestamps the
rising edge. Encode this in the .supported_extts_flags field. This
re-enables support for the PTP_EXTTS_REQUEST2 ioctl.
Reported-by: James Clark <jjc@jclark.com>
Fixes: 7c571ac57d ("net: ptp: introduce .supported_extts_flags to ptp_clock_info")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: James Clark <jjc@jclark.com>
Link: https://patch.msgid.link/20250918-jk-fix-bcm-phy-supported-flags-v1-2-747b60407c9c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e6c88d85623dc0c5c3faf185c12bd723efde5ee ]
The bcm_ptp_perout_locked() function has support for handling
PTP_PEROUT_DUTY_CYCLE, but its not listed in the supported_perout_flags.
Attempts to use the duty cycle support will be rejected since commit
d9f3e9ecc4 ("net: ptp: introduce .supported_perout_flags to
ptp_clock_info"), as this flag accidentally missed while doing the
conversion.
Drop the unnecessary supported flags check from the bcm_ptp_perout_locked()
function and correctly set the supported_perout_flags. This fixes use of
the PTP_PEROUT_DUTY_CYCLE support for the broadcom driver.
Reported-by: James Clark <jjc@jclark.com>
Fixes: d9f3e9ecc4 ("net: ptp: introduce .supported_perout_flags to ptp_clock_info")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: James Clark <jjc@jclark.com>
Link: https://patch.msgid.link/20250918-jk-fix-bcm-phy-supported-flags-v1-1-747b60407c9c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afe16653e05db07d658b55245c7a2e0603f136c0 ]
vhost_task_create() creates a task and keeps a reference to its
task_struct. That task may exit early via a signal and its task_struct
will be released.
A pending vhost_task_wake() will then attempt to wake the task and
access a task_struct which is no longer there.
Acquire a reference on the task_struct while creating the thread and
release the reference while the struct vhost_task itself is removed.
If the task exits early due to a signal, then the vhost_task_wake() will
still access a valid task_struct. The wake is safe and will be skipped
in this case.
Fixes: f9010dbdce ("fork, vhost: Use CLONE_THREAD to fix freezer/ps regression")
Reported-by: Sean Christopherson <seanjc@google.com>
Closes: https://lore.kernel.org/all/aKkLEtoDXKxAAWju@google.com/
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Message-Id: <20250918181144.Ygo8BZ-R@linutronix.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
