commit ae668cd567a6a7622bc813ee0bb61c42bed61ba7 upstream.
ENODATA (aka ENOATTR) has a very specific meaning in the xfs xattr code;
namely, that the requested attribute name could not be found.
However, a medium error from disk may also return ENODATA. At best,
this medium error may escape to userspace as "attribute not found"
when in fact it's an IO (disk) error.
At worst, we may oops in xfs_attr_leaf_get() when we do:
error = xfs_attr_leaf_hasname(args, &bp);
if (error == -ENOATTR) {
xfs_trans_brelse(args->trans, bp);
return error;
}
because an ENODATA/ENOATTR error from disk leaves us with a null bp,
and the xfs_trans_brelse will then null-deref it.
As discussed on the list, we really need to modify the lower level
IO functions to trap all disk errors and ensure that we don't let
unique errors like this leak up into higher xfs functions - many
like this should be remapped to EIO.
However, this patch directly addresses a reported bug in the xattr
code, and should be safe to backport to stable kernels. A larger-scope
patch to handle more unique errors at lower levels can follow later.
(Note, prior to 07120f1abd we did not oops, but we did return the
wrong error code to userspace.)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Fixes: 07120f1abd ("xfs: Add xfs_has_attr and subroutines")
Cc: stable@vger.kernel.org # v5.9+
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
[ Adjust context: removed metadata health tracking calls ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit a19b31f854 which is
commit a40c5d727b upstream.
The upstream commit a40c5d727b ("drm/dp:
Change AUX DPCD probe address from DPCD_REV to LANE0_1_STATUS") the
reverted commit backported causes a regression, on one eDP panel at
least resulting in display flickering, described in detail at the Link:
below. The issue fixed by the upstream commit will need a different
solution, revert the backport for now.
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: Sasha Levin <sashal@kernel.org>
Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14558
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2682468671 upstream.
When a user requests more than 60 bytes of data the MCP2221 must chunk
the data in chunks up to 60 bytes long (see command/response code 0x40
in the datasheet).
In order to signal that the device has more data the (undocumented) byte
at byte index 2 of the Get I2C Data response uses the value 0x54. This
contrasts with the case for the final data chunk where the value
returned is 0x55 (MCP2221_I2C_READ_COMPL). The fact that 0x55 was not
returned in the response was interpreted by the driver as a failure
meaning that all reads of more than 60 bytes would fail.
Add support for reads that are split over multiple chunks by looking for
the response code indicating that more data is expected and continuing
the read as the code intended. Some timing delays are required to ensure
the chip has time to refill its FIFO as data is read in from the I2C
bus. This timing has been tested in my system when configured for bus
speeds of 50KHz, 100KHz, and 400KHz and operates well.
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fixes: 67a95c2146 ("HID: mcp2221: add usb to i2c-smbus host bridge")
[romain.sioen@microchip.com: backport to stable, up to 6.8. Add "Fixes" tag]
Signed-off-by: Romain Sioen <romain.sioen@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 02a4675360 upstream.
Since the initial commit of this driver the I2C bus speed has been
reconfigured for every single transfer. This is despite the fact that we
never change the speed and it is never "lost" by the chip.
Upon investigation we find that what was really happening was that the
setting of the bus speed had the side effect of cancelling a previous
failed command if there was one, thereby freeing the bus. This is the
part that was actually required to keep the bus operational in the face
of failed commands.
Instead of always setting the speed, we now correctly cancel any failed
commands as they are detected. This means we can just set the bus speed
at probe time and remove the previous speed sets on each transfer.
This has the effect of improving performance and reducing the number of
commands required to complete transfers.
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fixes: 67a95c2146 ("HID: mcp2221: add usb to i2c-smbus host bridge")
[romain.sioen@microchip.com: backport to stable, up to 6.8. Add "Fixes" tag]
Signed-off-by: Romain Sioen <romain.sioen@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2fe0c54fb7401e6ecd3c10348519ab9e23bd639 upstream.
On some chipsets, which block-linear modifiers are
supported is format-specific. However, linear
modifiers are always be supported. The prior
modifier filtering logic was not accounting for
the linear case.
Cc: stable@vger.kernel.org
Fixes: c586f30bf7 ("drm/nouveau/kms: Add format mod prop to base/ovly/nvdisp")
Signed-off-by: James Jones <jajones@nvidia.com>
Link: https://lore.kernel.org/r/20250811220017.1337-3-jajones@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89a2d212bdb4bc29bed8e7077abe054b801137ea upstream.
When CONFIG_DMA_DIRECT_REMAP is enabled, atomic pool pages are
remapped via dma_common_contiguous_remap() using the supplied
pgprot. Currently, the mapping uses
pgprot_dmacoherent(PAGE_KERNEL), which leaves the memory encrypted
on systems with memory encryption enabled (e.g., ARM CCA Realms).
This can cause the DMA layer to fail or crash when accessing the
memory, as the underlying physical pages are not configured as
expected.
Fix this by requesting a decrypted mapping in the vmap() call:
pgprot_decrypted(pgprot_dmacoherent(PAGE_KERNEL))
This ensures that atomic pool memory is consistently mapped
unencrypted.
Cc: stable@vger.kernel.org
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250811181759.998805-1-sdonthineni@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac4ed2da4c1305a1a002415058aa7deaf49ffe3e upstream.
This reverts commit b08425fa77ad2f305fe57a33dceb456be03b653f.
Revert this to align with 6.17 because the fixes tag
was wrong on this commit.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit be33e8a239aac204d7e9e673c4220ef244eb1ba3)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 185c926283da67a72df20a63a5046b3b4631b7d9 upstream.
in ntrig_report_version(), hdev parameter passed from hid_probe().
sending descriptor to /dev/uhid can make hdev->dev.parent->parent to null
if hdev->dev.parent->parent is null, usb_dev has
invalid address(0xffffffffffffff58) that hid_to_usb_dev(hdev) returned
when usb_rcvctrlpipe() use usb_dev,it trigger
page fault error for address(0xffffffffffffff58)
add null check logic to ntrig_report_version()
before calling hid_to_usb_dev()
Signed-off-by: Minjong Kim <minbell.kim@samsung.com>
Link: https://patch.msgid.link/20250813-hid-ntrig-page-fault-fix-v2-1-f98581f35106@samsung.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0379eb8691b9c4477da0277ae0832036ca4410b4 upstream.
A malicious HID device can trigger a slab out-of-bounds during
mt_report_fixup() by passing in report descriptor smaller than
607 bytes. mt_report_fixup() attempts to patch byte offset 607
of the descriptor with 0x25 by first checking if byte offset
607 is 0x15 however it lacks bounds checks to verify if the
descriptor is big enough before conducting this check. Fix
this bug by ensuring the descriptor size is at least 608
bytes before accessing it.
Below is the KASAN splat after the out of bounds access happens:
[ 13.671954] ==================================================================
[ 13.672667] BUG: KASAN: slab-out-of-bounds in mt_report_fixup+0x103/0x110
[ 13.673297] Read of size 1 at addr ffff888103df39df by task kworker/0:1/10
[ 13.673297]
[ 13.673297] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0-00005-gec5d573d83f4-dirty #3
[ 13.673297] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/04
[ 13.673297] Call Trace:
[ 13.673297] <TASK>
[ 13.673297] dump_stack_lvl+0x5f/0x80
[ 13.673297] print_report+0xd1/0x660
[ 13.673297] kasan_report+0xe5/0x120
[ 13.673297] __asan_report_load1_noabort+0x18/0x20
[ 13.673297] mt_report_fixup+0x103/0x110
[ 13.673297] hid_open_report+0x1ef/0x810
[ 13.673297] mt_probe+0x422/0x960
[ 13.673297] hid_device_probe+0x2e2/0x6f0
[ 13.673297] really_probe+0x1c6/0x6b0
[ 13.673297] __driver_probe_device+0x24f/0x310
[ 13.673297] driver_probe_device+0x4e/0x220
[ 13.673297] __device_attach_driver+0x169/0x320
[ 13.673297] bus_for_each_drv+0x11d/0x1b0
[ 13.673297] __device_attach+0x1b8/0x3e0
[ 13.673297] device_initial_probe+0x12/0x20
[ 13.673297] bus_probe_device+0x13d/0x180
[ 13.673297] device_add+0xe3a/0x1670
[ 13.673297] hid_add_device+0x31d/0xa40
[...]
Fixes: c8000deb68 ("HID: multitouch: Add support for GT7868Q")
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3af6ca9a8c34bbd8cff32b469b84c9021c9e7e4 upstream.
After hid_hw_start() is called hidinput_connect() will eventually be
called to set up the device with the input layer since the
HID_CONNECT_DEFAULT connect mask is used. During hidinput_connect()
all input and output reports are processed and corresponding hid_inputs
are allocated and configured via hidinput_configure_usages(). This
process involves slot tagging report fields and configuring usages
by setting relevant bits in the capability bitmaps. However it is possible
that the capability bitmaps are not set at all leading to the subsequent
hidinput_has_been_populated() check to fail leading to the freeing of the
hid_input and the underlying input device.
This becomes problematic because a malicious HID device like a
ASUS ROG N-Key keyboard can trigger the above scenario via a
specially crafted descriptor which then leads to a user-after-free
when the name of the freed input device is written to later on after
hid_hw_start(). Below, report 93 intentionally utilises the
HID_UP_UNDEFINED Usage Page which is skipped during usage
configuration, leading to the frees.
0x05, 0x0D, // Usage Page (Digitizer)
0x09, 0x05, // Usage (Touch Pad)
0xA1, 0x01, // Collection (Application)
0x85, 0x0D, // Report ID (13)
0x06, 0x00, 0xFF, // Usage Page (Vendor Defined 0xFF00)
0x09, 0xC5, // Usage (0xC5)
0x15, 0x00, // Logical Minimum (0)
0x26, 0xFF, 0x00, // Logical Maximum (255)
0x75, 0x08, // Report Size (8)
0x95, 0x04, // Report Count (4)
0xB1, 0x02, // Feature (Data,Var,Abs)
0x85, 0x5D, // Report ID (93)
0x06, 0x00, 0x00, // Usage Page (Undefined)
0x09, 0x01, // Usage (0x01)
0x15, 0x00, // Logical Minimum (0)
0x26, 0xFF, 0x00, // Logical Maximum (255)
0x75, 0x08, // Report Size (8)
0x95, 0x1B, // Report Count (27)
0x81, 0x02, // Input (Data,Var,Abs)
0xC0, // End Collection
Below is the KASAN splat after triggering the UAF:
[ 21.672709] ==================================================================
[ 21.673700] BUG: KASAN: slab-use-after-free in asus_probe+0xeeb/0xf80
[ 21.673700] Write of size 8 at addr ffff88810a0ac000 by task kworker/1:2/54
[ 21.673700]
[ 21.673700] CPU: 1 UID: 0 PID: 54 Comm: kworker/1:2 Not tainted 6.16.0-rc4-g9773391cf4dd-dirty #36 PREEMPT(voluntary)
[ 21.673700] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
[ 21.673700] Call Trace:
[ 21.673700] <TASK>
[ 21.673700] dump_stack_lvl+0x5f/0x80
[ 21.673700] print_report+0xd1/0x660
[ 21.673700] kasan_report+0xe5/0x120
[ 21.673700] __asan_report_store8_noabort+0x1b/0x30
[ 21.673700] asus_probe+0xeeb/0xf80
[ 21.673700] hid_device_probe+0x2ee/0x700
[ 21.673700] really_probe+0x1c6/0x6b0
[ 21.673700] __driver_probe_device+0x24f/0x310
[ 21.673700] driver_probe_device+0x4e/0x220
[...]
[ 21.673700]
[ 21.673700] Allocated by task 54:
[ 21.673700] kasan_save_stack+0x3d/0x60
[ 21.673700] kasan_save_track+0x18/0x40
[ 21.673700] kasan_save_alloc_info+0x3b/0x50
[ 21.673700] __kasan_kmalloc+0x9c/0xa0
[ 21.673700] __kmalloc_cache_noprof+0x139/0x340
[ 21.673700] input_allocate_device+0x44/0x370
[ 21.673700] hidinput_connect+0xcb6/0x2630
[ 21.673700] hid_connect+0xf74/0x1d60
[ 21.673700] hid_hw_start+0x8c/0x110
[ 21.673700] asus_probe+0x5a3/0xf80
[ 21.673700] hid_device_probe+0x2ee/0x700
[ 21.673700] really_probe+0x1c6/0x6b0
[ 21.673700] __driver_probe_device+0x24f/0x310
[ 21.673700] driver_probe_device+0x4e/0x220
[...]
[ 21.673700]
[ 21.673700] Freed by task 54:
[ 21.673700] kasan_save_stack+0x3d/0x60
[ 21.673700] kasan_save_track+0x18/0x40
[ 21.673700] kasan_save_free_info+0x3f/0x60
[ 21.673700] __kasan_slab_free+0x3c/0x50
[ 21.673700] kfree+0xcf/0x350
[ 21.673700] input_dev_release+0xab/0xd0
[ 21.673700] device_release+0x9f/0x220
[ 21.673700] kobject_put+0x12b/0x220
[ 21.673700] put_device+0x12/0x20
[ 21.673700] input_free_device+0x4c/0xb0
[ 21.673700] hidinput_connect+0x1862/0x2630
[ 21.673700] hid_connect+0xf74/0x1d60
[ 21.673700] hid_hw_start+0x8c/0x110
[ 21.673700] asus_probe+0x5a3/0xf80
[ 21.673700] hid_device_probe+0x2ee/0x700
[ 21.673700] really_probe+0x1c6/0x6b0
[ 21.673700] __driver_probe_device+0x24f/0x310
[ 21.673700] driver_probe_device+0x4e/0x220
[...]
Fixes: 9ce12d8be1 ("HID: asus: Add i2c touchpad support")
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Link: https://patch.msgid.link/20250810181041.44874-1-qasdev00@gmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a6358f8cf64850f3f27857b8ed8c1b08cfc4685c ]
Observed on kernel 6.6 (present on master as well):
BUG: KASAN: slab-out-of-bounds in memcmp+0x98/0xd0
Call trace:
kasan_check_range+0xe8/0x190
__asan_loadN+0x1c/0x28
memcmp+0x98/0xd0
efivarfs_d_compare+0x68/0xd8
__d_lookup_rcu_op_compare+0x178/0x218
__d_lookup_rcu+0x1f8/0x228
d_alloc_parallel+0x150/0x648
lookup_open.isra.0+0x5f0/0x8d0
open_last_lookups+0x264/0x828
path_openat+0x130/0x3f8
do_filp_open+0x114/0x248
do_sys_openat2+0x340/0x3c0
__arm64_sys_openat+0x120/0x1a0
If dentry->d_name.len < EFI_VARIABLE_GUID_LEN , 'guid' can become
negative, leadings to oob. The issue can be triggered by parallel
lookups using invalid filename:
T1 T2
lookup_open
->lookup
simple_lookup
d_add
// invalid dentry is added to hash list
lookup_open
d_alloc_parallel
__d_lookup_rcu
__d_lookup_rcu_op_compare
hlist_bl_for_each_entry_rcu
// invalid dentry can be retrieved
->d_compare
efivarfs_d_compare
// oob
Fix it by checking 'guid' before cmp.
Fixes: da27a24383 ("efivarfs: guid part of filenames are case-insensitive")
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Wu Guanghao <wuguanghao3@huawei.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f23382841e67174211271a454811dd17c0ef3c5 ]
Enabling RX FIFO Overflow interrupts is counterproductive
and causes an interrupt storm when RX FIFO overflows.
Disabling this interrupt has no side effect and eliminates
interrupt storms when the RX FIFO overflows.
Commit 8a7cb245cf ("net: stmmac: Do not enable RX FIFO
overflow interrupts") disables RX FIFO overflow interrupts
for DWMAC4 IP and removes the corresponding handling of
this interrupt. This patch is doing the same thing for
XGMAC IP.
Fixes: 2142754f8b ("net: stmmac: Add MAC related callbacks for XGMAC2")
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250825-xgmac-minor-fixes-v3-1-c225fe4444c0@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aca0c31af61e0d5cf1675a0cbd29460b95ae693c ]
The local Xoff value is being set before the firmware (FW) update.
In case of a failure where the FW is not updated with the new value,
there is no fallback to the previous value.
Update the local Xoff value after the FW has been successfully set.
Fixes: 0696d60853 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-12-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d24341740fe48add8a227a753e68b6eedf4b385a ]
Xon/Xoff sizes are derived from calculations that include
the port speed.
These settings need to be updated and applied whenever the
port speed is changed.
The port speed is typically set after the physical link goes down
and is negotiated as part of the link-up process between the two
connected interfaces.
Xon/Xoff parameters being updated at the point where the new
negotiated speed is established.
Fixes: 0696d60853 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-11-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ceddedc969f0532b7c62ca971ee50d519d2bc0cb ]
Xon/Xoff sizes are derived from calculation that include the MTU size.
Set Xon/Xoff when MTU is set.
If Xon/Xoff fails, set the previous MTU.
Fixes: 0696d60853 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-10-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 882e57cbc7204662f6c5672d5b04336c1d790b03 ]
It looks like that every time when the interface was set down and up the
driver was creating a new ptp clock. On top of this the function
ptp_clock_unregister was never called.
Therefore fix this by calling ptp_clock_register and initialize the
mii_ts struct inside the probe function and call ptp_clock_unregister when
driver is removed.
Fixes: 7d272e63e0 ("net: phy: mscc: timestamping and PHC support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250825065543.2916334-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 007a5ffadc4fd51739527f1503b7cf048f31c413 ]
`McstFramesRcvdOk` counts the number of received multicast packets, and
it reports the value correctly.
However, reading `McstFramesRcvdOk` clears the register to zero. As a
result, the driver was reporting only the packets since the last read,
instead of the accumulated total.
Fix this by updating the multicast statistics accumulatively instaed of
instantaneously.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Tested-on: D-Link DGE-550T Rev-A3
Signed-off-by: Yeounsu Moon <yyyynoom@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250823182927.6063-3-yyyynoom@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15bf2c6391bafb14a3020d06ec0761bce0803463 ]
This attempts to detect if HCI_EV_NUM_COMP_PKTS contain an unbalanced
(more than currently considered outstanding) number of packets otherwise
it could cause the hcon->sent to underflow and loop around breaking the
tracking of the outstanding packets pending acknowledgment.
Fixes: f428091858 ("Bluetooth: Simplify num_comp_pkts_evt function")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88688a2c8ac6c8036d983ad8b34ce191c46a10aa ]
When compiling for pseries or powernv defconfig with "make C=1",
these warning were reported bu sparse tool in powerpc/kernel/kvm.c
arch/powerpc/kernel/kvm.c:635:9: warning: switch with no cases
arch/powerpc/kernel/kvm.c:646:9: warning: switch with no cases
Currently #ifdef were added after the switch case which are specific
for BOOKE and PPC_BOOK3S_32. These are not enabled in pseries/powernv
defconfig. Fix it by moving the #ifdef before switch(){}
Fixes: cbe487fac7 ("KVM: PPC: Add mtsrin PV code")
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250518044107.39928-1-maddy@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5189446ba995556eaa3755a6e875bc06675b88bd ]
Commit 9e30ecf23b ("net: ipv4: fix incorrect MTU in broadcast routes")
introduced a regression where local-broadcast packets would have their
gateway set in __mkroute_output, which was caused by fi = NULL being
removed.
Fix this by resetting the fib_info for local-broadcast packets. This
preserves the intended changes for directed-broadcast packets.
Cc: stable@vger.kernel.org
Fixes: 9e30ecf23b ("net: ipv4: fix incorrect MTU in broadcast routes")
Reported-by: Brett A C Sheffield <bacs@librecast.net>
Closes: https://lore.kernel.org/regressions/20250822165231.4353-4-bacs@librecast.net
Signed-off-by: Oscar Maes <oscmaes92@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250827062322.4807-1-oscmaes92@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1ea1cd11c7 upstream.
When directory's last extent has more that one block and its length is
not multiple of a block side, the code wrongly decided to move to the
next extent instead of processing the last partial block. This led to
directory corruption. Fix the rounding issue.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd54bcf86c91a4455b1f95cbc8e9ac91205f3193 upstream.
When operating on struct vhost_net_ubuf_ref, the following execution
sequence is theoretically possible:
CPU0 is finalizing DMA operation CPU1 is doing VHOST_NET_SET_BACKEND
// ubufs->refcount == 2
vhost_net_ubuf_put() vhost_net_ubuf_put_wait_and_free(oldubufs)
vhost_net_ubuf_put_and_wait()
vhost_net_ubuf_put()
int r = atomic_sub_return(1, &ubufs->refcount);
// r = 1
int r = atomic_sub_return(1, &ubufs->refcount);
// r = 0
wait_event(ubufs->wait, !atomic_read(&ubufs->refcount));
// no wait occurs here because condition is already true
kfree(ubufs);
if (unlikely(!r))
wake_up(&ubufs->wait); // use-after-free
This leads to use-after-free on ubufs access. This happens because CPU1
skips waiting for wake_up() when refcount is already zero.
To prevent that use a read-side RCU critical section in vhost_net_ubuf_put(),
as suggested by Hillf Danton. For this lock to take effect, free ubufs with
kfree_rcu().
Cc: stable@vger.kernel.org
Fixes: 0ad8b480d6 ("vhost: fix ref cnt checking deadlock")
Reported-by: Andrey Ryabinin <arbn@yandex-team.com>
Suggested-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Message-Id: <20250805130917.727332-1-kniv@yandex-team.ru>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 76d2e3890fb169168c73f2e4f8375c7cc24a765e upstream.
After nfs_lock_and_join_requests() tests for whether the request is
still attached to the mapping, nothing prevents a call to
nfs_inode_remove_request() from succeeding until we actually lock the
page group.
The reason is that whoever called nfs_inode_remove_request() doesn't
necessarily have a lock on the page group head.
So in order to avoid races, let's take the page group lock earlier in
nfs_lock_and_join_requests(), and hold it across the removal of the
request in nfs_inode_remove_request().
Reported-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Joe Quanaim <jdq@meta.com>
Tested-by: Andrew Steffen <aksteffen@meta.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Fixes: bd37d6fce1 ("NFSv4: Convert nfs_lock_and_join_requests() to use nfs_page_find_head_request()")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25edbcac6e upstream.
Fold nfs_page_group_lock_subrequests into nfs_lock_and_join_requests to
prepare for future changes to this code, and move the helpers to write.c
as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 43e0da37d5cfb23eec6aeee9422f84d86621ce2b ]
We already have a component driver named "RX-MACRO", which is
lpass-rx-macro.c. The tx macro component driver's name should
be "TX-MACRO" accordingly. Fix it.
Cc: Srinivas Kandagatla <srini@kernel.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20250806140030.691477-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2f54ff15c3bdc0132e20aae041607e2320dbd73 ]
The SCSI sysfs attributes "supported_mode" and "active_mode" do not
define a store method and thus cannot be modified. Correct the
DEVICE_ATTR() call for these two attributes to not include S_IWUSR to
allow write access as they are read-only.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250728041700.76660-1-dlemoal@kernel.org
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Johannes Thumshin <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4013aef2ced9b756a410f50d12df9ebe6a883e4a ]
When calling ftrace_dump_one() concurrently with reading trace_pipe,
a WARN_ON_ONCE() in trace_printk_seq() can be triggered due to a race
condition.
The issue occurs because:
CPU0 (ftrace_dump) CPU1 (reader)
echo z > /proc/sysrq-trigger
!trace_empty(&iter)
trace_iterator_reset(&iter) <- len = size = 0
cat /sys/kernel/tracing/trace_pipe
trace_find_next_entry_inc(&iter)
__find_next_entry
ring_buffer_empty_cpu <- all empty
return NULL
trace_printk_seq(&iter.seq)
WARN_ON_ONCE(s->seq.len >= s->seq.size)
In the context between trace_empty() and trace_find_next_entry_inc()
during ftrace_dump, the ring buffer data was consumed by other readers.
This caused trace_find_next_entry_inc to return NULL, failing to populate
`iter.seq`. At this point, due to the prior trace_iterator_reset, both
`iter.seq.len` and `iter.seq.size` were set to 0. Since they are equal,
the WARN_ON_ONCE condition is triggered.
Move the trace_printk_seq() into the if block that checks to make sure the
return value of trace_find_next_entry_inc() is non-NULL in
ftrace_dump_one(), ensuring the 'iter.seq' is properly populated before
subsequent operations.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ingo Molnar <mingo@elte.hu>
Link: https://lore.kernel.org/20250822033343.3000289-1-wutengda@huaweicloud.com
Fixes: d769041f86 ("ring_buffer: implement new locking")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a12946bef0407cf2db0899c83d42c47c00af3fbc ]
When building on ARCH=um (which does not set HAS_IOMEM), kconfig
reports an unmet dependency caused by PINCTRL_STMFX. It selects
MFD_STMFX, which depends on HAS_IOMEM. To stop this warning,
PINCTRL_STMFX should also depend on HAS_IOMEM.
kconfig warning:
WARNING: unmet direct dependencies detected for MFD_STMFX
Depends on [n]: HAS_IOMEM [=n] && I2C [=y] && OF [=y]
Selected by [y]:
- PINCTRL_STMFX [=y] && PINCTRL [=y] && I2C [=y] && OF_GPIO [=y]
Fixes: 1490d9f841 ("pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/20250815022721.1650885-1-rdunlap@infradead.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d3b4bec3c ]
First of all, tell it how many slots do we want, not which slot
is wanted. It makes one caller (dup_fd()) more straightforward
and doesn't harm another (expand_fdtable()).
Furthermore, make it return ERR_PTR() on failure rather than
returning NULL. Simplifies the callers.
Simplify the size calculation, while we are at it - note that we
always have slots_wanted greater than BITS_PER_LONG. What the
rules boil down to is
* use the smallest power of two large enough to give us
that many slots
* on 32bit skip 64 and 128 - the minimal capacity we want
there is 256 slots (i.e. 1Kb fd array).
* on 64bit don't skip anything, the minimal capacity is
128 - and we'll never be asked for 64 or less. 128 slots means
1Kb fd array, again.
* on 128bit, if that ever happens, don't skip anything -
we'll never be asked for 128 or less, so the fd array allocation
will be at least 2Kb.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 16ee3ea8fa upstream.
When userspace sets supported rates for a new station via
NL80211_CMD_NEW_STATION, it might send a list that's empty
or contains only invalid values. Currently, we process these
values in sta_link_apply_parameters() without checking the result of
ieee80211_parse_bitrates(), which can lead to an empty rates bitmap.
A similar issue was addressed for NL80211_CMD_SET_BSS in commit
ce04abc3fc ("wifi: mac80211: check basic rates validity").
This patch applies the same approach in sta_link_apply_parameters()
for NL80211_CMD_NEW_STATION, ensuring there is at least one valid
rate by inspecting the result of ieee80211_parse_bitrates().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: b95eb7f0ee ("wifi: cfg80211/mac80211: separate link params from station params")
Signed-off-by: Mikhail Lobanov <m.lobanov@rosa.ru>
Link: https://patch.msgid.link/20250317103139.17625-1-m.lobanov@rosa.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[ Summary of conflict resolutions:
- Function ieee80211_parse_bitrates() takes channel width as its
first parameter in mainline kernel version. In v5.15 the function
takes the whole chandef struct as its first parameter.
- The same function takes link station parameters as its last
parameter, and in v5.15 they are in a struct called sta,
instead of a struct called link_sta. ]
Signed-off-by: Hanne-Lotta Mäenpää <hannelotta@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 91a79b792204313153e1bdbbe5acbfc28903b3a5 ]
recent patches to add a WARN() when replacing skb dst entry found an
old bug:
WARNING: include/linux/skbuff.h:1165 skb_dst_check_unset include/linux/skbuff.h:1164 [inline]
WARNING: include/linux/skbuff.h:1165 skb_dst_set include/linux/skbuff.h:1210 [inline]
WARNING: include/linux/skbuff.h:1165 nf_reject_fill_skb_dst+0x2a4/0x330 net/ipv4/netfilter/nf_reject_ipv4.c:234
[..]
Call Trace:
nf_send_unreach+0x17b/0x6e0 net/ipv4/netfilter/nf_reject_ipv4.c:325
nft_reject_inet_eval+0x4bc/0x690 net/netfilter/nft_reject_inet.c:27
expr_call_ops_eval net/netfilter/nf_tables_core.c:237 [inline]
..
This is because blamed commit forgot about loopback packets.
Such packets already have a dst_entry attached, even at PRE_ROUTING stage.
Instead of checking hook just check if the skb already has a route
attached to it.
Fixes: f53b9b0bdc ("netfilter: introduce support for reject at prerouting stage")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20250820123707.10671-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3868f910440c47cd5d158776be4ba4e2186beda7 ]
When kernel lockdown is active, debugfs_locked_down() blocks access to
hypfs files that register ioctl callbacks, even if the ioctl interface
is not required for a function. This unnecessarily breaks userspace
tools that only rely on read operations.
Resolve this by registering a minimal set of file operations during
lockdown, avoiding ioctl registration and preserving access for affected
tooling.
Note that this change restores hypfs functionality when lockdown is
active from early boot (e.g. via lockdown=integrity kernel parameter),
but does not apply to scenarios where lockdown is enabled dynamically
while Linux is running.
Tested-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Fixes: 5496197f9b ("debugfs: Restrict debugfs when the kernel is locked down")
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fec7bdfe7f8694a0c39e6c3ec026ff61ca1058b9 ]
Currently, hypfs registers ioctl callbacks for all debugfs files,
despite only one file requiring them. This leads to unintended exposure
of unused interfaces to user space and can trigger side effects such as
restricted access when kernel lockdown is enabled.
Restrict ioctl registration to only those files that implement ioctl
functionality to avoid interface clutter and unnecessary access
restrictions.
Tested-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Fixes: 5496197f9b ("debugfs: Restrict debugfs when the kernel is locked down")
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8410fe81093ff231e964891e215b624dabb734b0 ]
The entry of the validators table for UAC3 feature unit is defined
with a wrong sub-type UAC_FEATURE (= 0x06) while it should have been
UAC3_FEATURE (= 0x07). This patch corrects the entry value.
Fixes: 57f8770620 ("ALSA: usb-audio: More validations of descriptor units")
Link: https://patch.msgid.link/20250821150835.8894-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b64d035f77b1f02ab449393342264b44950a75ae ]
The port's actor_oper_port_state activity flag should be updated immediately
after changing the lacp_active option to reflect the current mode correctly.
Fixes: 3a755cd8b7 ("bonding: add new option lacp_active")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250815062000.22220-2-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c2192e5f9c7c2892fe2363244d1387f62710d83 ]
The WARN_ON trigger based on !cl->leaf.q->q.qlen is unnecessary in
htb_activate. htb_dequeue_tree already accounts for that scenario.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: William Liu <will@willsroot.io>
Reviewed-by: Savino Dicanosa <savy@syst3mfailure.io>
Link: https://patch.msgid.link/20250819033632.579854-1-will@willsroot.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15de71d06a400f7fdc15bf377a2552b0ec437cf5 ]
The following setup can trigger a WARNING in htb_activate due to
the condition: !cl->leaf.q->q.qlen
tc qdisc del dev lo root
tc qdisc add dev lo root handle 1: htb default 1
tc class add dev lo parent 1: classid 1:1 \
htb rate 64bit
tc qdisc add dev lo parent 1:1 handle f: \
cake memlimit 1b
ping -I lo -f -c1 -s64 -W0.001 127.0.0.1
This is because the low memlimit leads to a low buffer_limit, which
causes packet dropping. However, cake_enqueue still returns
NET_XMIT_SUCCESS, causing htb_enqueue to call htb_activate with an
empty child qdisc. We should return NET_XMIT_CN when packets are
dropped from the same tin and flow.
I do not believe return value of NET_XMIT_CN is necessary for packet
drops in the case of ack filtering, as that is meant to optimize
performance, not to signal congestion.
Fixes: 046f6fd5da ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: William Liu <will@willsroot.io>
Reviewed-by: Savino Dicanosa <savy@syst3mfailure.io>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20250819033601.579821-1-will@willsroot.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1468c1f97cf32418e34dbb40b784ed9333b9e123 ]
Device ID comparison in igc_is_device_id_i226 is performed before
the ID is set, resulting in always failing check on init.
Before the patch:
* L1.2 is not disabled on init
* L1.2 is properly disabled after suspend-resume cycle
With the patch:
* L1.2 is properly disabled both on init and after suspend-resume
How to test:
Connect to the 1G link with 300+ mbit/s Internet speed, and run
the download speed test, such as:
curl -o /dev/null http://speedtest.selectel.ru/1GB
Without L1.2 disabled, the speed would be no more than ~200 mbit/s.
With L1.2 disabled, the speed would reach 1 gbit/s.
Note: it's required that the latency between your host and the remote
be around 3-5 ms, the test inside LAN (<1 ms latency) won't trigger the
issue.
Link: https://lore.kernel.org/intel-wired-lan/15248b4f-3271-42dd-8e35-02bfc92b25e1@intel.com
Fixes: 0325143b59 ("igc: disable L1.2 PCI-E link substate to avoid performance issue")
Signed-off-by: ValdikSS <iam@valdikss.org.ru>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250819222000.3504873-6-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d4d9ef9dfee877d494e5418f68a1016ef08cad6 ]
Resolve the budget negative overflow which leads to returning true in
ixgbe_xmit_zc even when the budget of descs are thoroughly consumed.
Before this patch, when the budget is decreased to zero and finishes
sending the last allowed desc in ixgbe_xmit_zc, it will always turn back
and enter into the while() statement to see if it should keep processing
packets, but in the meantime it unexpectedly decreases the value again to
'unsigned int (0--)', namely, UINT_MAX. Finally, the ixgbe_xmit_zc returns
true, showing 'we complete cleaning the budget'. That also means
'clean_complete = true' in ixgbe_poll.
The true theory behind this is if that budget number of descs are consumed,
it implies that we might have more descs to be done. So we should return
false in ixgbe_xmit_zc to tell napi poll to find another chance to start
polling to handle the rest of descs. On the contrary, returning true here
means job done and we know we finish all the possible descs this time and
we don't intend to start a new napi poll.
It is apparently against our expectations. Please also see how
ixgbe_clean_tx_irq() handles the problem: it uses do..while() statement
to make sure the budget can be decreased to zero at most and the negative
overflow never happens.
The patch adds 'likely' because we rarely would not hit the loop condition
since the standard budget is 256.
Fixes: 8221c5eba8 ("ixgbe: add AF_XDP zero-copy Tx support")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Priya Singh <priyax.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250819222000.3504873-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24ef2f53c07f273bad99173e27ee88d44d135b1c ]
Syzbot reported shift-out-of-bounds exception on MDIO bus initialization.
The PHY address should be masked to 5 bits (0-31). Without this
mask, invalid PHY addresses could be used, potentially causing issues
with MDIO bus operations.
Fix this by masking the PHY address with 0x1f (31 decimal) to ensure
it stays within the valid range.
Fixes: 4faff70959d5 ("net: usb: asix_devices: add phy_mask for ax88772 mdio bus")
Reported-by: syzbot+20537064367a0f98d597@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=20537064367a0f98d597
Tested-by: syzbot+20537064367a0f98d597@syzkaller.appspotmail.com
Signed-off-by: Yuichiro Tsuji <yuichtsu@amazon.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250818084541.1958-1-yuichtsu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc1a59cff9f797bfbf8f3104507584d89e9ecf2e ]
There was a problem when we received frames and the frames were
timestamped. The driver is configured to store the nanosecond part of
the timestmap in the ptp reserved bits and it would take the second part
by reading the LTC. The problem is that when reading the LTC we are in
atomic context and to read the second part will go over mdio bus which
might sleep, so we get an error.
The fix consists in actually put all the frames in a queue and start the
aux work and in that work to read the LTC and then calculate the full
received time.
Fixes: 7d272e63e0 ("net: phy: mscc: timestamping and PHC support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250818081029.1300780-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3d73e1590 ]
Since commit
baebdf48c3 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Radu Pirea <radu-nicolae.pirea@oss.nxp.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: bc1a59cff9f7 ("phy: mscc: Fix timestamping for vsc8584")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0417adf367a0af11adf7ace849af4638cfb573f7 ]
ppp_fill_forward_path() has two race conditions:
1. The ppp->channels list can change between list_empty() and
list_first_entry(), as ppp_lock() is not held. If the only channel
is deleted in ppp_disconnect_channel(), list_first_entry() may
access an empty head or a freed entry, and trigger a panic.
2. pch->chan can be NULL. When ppp_unregister_channel() is called,
pch->chan is set to NULL before pch is removed from ppp->channels.
Fix these by using a lockless RCU approach:
- Use list_first_or_null_rcu() to safely test and access the first list
entry.
- Convert list modifications on ppp->channels to their RCU variants and
add synchronize_net() after removal.
- Check for a NULL pch->chan before dereferencing it.
Fixes: f6efc675c9 ("net: ppp: resolve forwarding path for bridge pppoe devices")
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://patch.msgid.link/20250814012559.3705-2-dqfext@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
