MIRRORS/linux-yocto
1
0
Fork 0
mirror of git://git.yoctoproject.org/linux-yocto.git synced 2025-08-21 16:31:14 +02:00
Code Issues Actions Packages Projects Releases Wiki Activity
master
linux-yocto/drivers/net/ethernet/Kconfig
Parthiban Veerasooran aa58bec064 net: ethernet: oa_tc6: implement register write operation 
Implement register write operation according to the control communication
specified in the OPEN Alliance 10BASE-T1x MACPHY Serial Interface
document. Control write commands are used by the SPI host to write
registers within the MAC-PHY. Each control write commands are composed of
a 32 bits control command header followed by register write data.

The MAC-PHY ignores the final 32 bits of data from the SPI host at the
end of the control write command. The write command and data is also
echoed from the MAC-PHY back to the SPI host to enable the SPI host to
identify which register write failed in the case of any bus errors.
Control write commands can write either a single register or multiple
consecutive registers. When multiple consecutive registers are written,
the address is automatically post-incremented by the MAC-PHY. Writing to
any unimplemented or undefined registers shall be ignored and yield no
effect.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Link: https://patch.msgid.link/20240909082514.262942-3-Parthiban.Veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11 20:53:42 -07:00

6.7 KiB
Raw Permalink Blame History

SPDX-License-Identifier: GPL-2.0-only

Ethernet LAN device configuration

menuconfig ETHERNET bool "Ethernet driver support" depends on NET default y help This section contains all the Ethernet device drivers.

if ETHERNET

config MDIO tristate

source "drivers/net/ethernet/3com/Kconfig" source "drivers/net/ethernet/actions/Kconfig" source "drivers/net/ethernet/adaptec/Kconfig" source "drivers/net/ethernet/aeroflex/Kconfig" source "drivers/net/ethernet/agere/Kconfig" source "drivers/net/ethernet/alacritech/Kconfig" source "drivers/net/ethernet/allwinner/Kconfig" source "drivers/net/ethernet/alteon/Kconfig" source "drivers/net/ethernet/altera/Kconfig" source "drivers/net/ethernet/amazon/Kconfig" source "drivers/net/ethernet/amd/Kconfig" source "drivers/net/ethernet/apm/Kconfig" source "drivers/net/ethernet/apple/Kconfig" source "drivers/net/ethernet/aquantia/Kconfig" source "drivers/net/ethernet/arc/Kconfig" source "drivers/net/ethernet/asix/Kconfig" source "drivers/net/ethernet/atheros/Kconfig"

config CX_ECAT tristate "Beckhoff CX5020 EtherCAT master support" depends on PCI depends on X86 || COMPILE_TEST help Driver for EtherCAT master module located on CCAT FPGA that can be found on Beckhoff CX5020, and possibly other of CX Beckhoff CX series industrial PCs.

  To compile this driver as a module, choose M here. The module
  will be called ec_bhf.

source "drivers/net/ethernet/broadcom/Kconfig" source "drivers/net/ethernet/cadence/Kconfig" source "drivers/net/ethernet/calxeda/Kconfig" source "drivers/net/ethernet/cavium/Kconfig" source "drivers/net/ethernet/chelsio/Kconfig" source "drivers/net/ethernet/cirrus/Kconfig" source "drivers/net/ethernet/cisco/Kconfig" source "drivers/net/ethernet/cortina/Kconfig" source "drivers/net/ethernet/davicom/Kconfig"

config DNET tristate "Dave ethernet support (DNET)" depends on HAS_IOMEM select PHYLIB help The Dave ethernet interface (DNET) is found on Qong Board FPGA. Say Y to include support for the DNET chip.

  To compile this driver as a module, choose M here: the module
  will be called dnet.

source "drivers/net/ethernet/dec/Kconfig" source "drivers/net/ethernet/dlink/Kconfig" source "drivers/net/ethernet/emulex/Kconfig" source "drivers/net/ethernet/engleder/Kconfig" source "drivers/net/ethernet/ezchip/Kconfig" source "drivers/net/ethernet/faraday/Kconfig" source "drivers/net/ethernet/freescale/Kconfig" source "drivers/net/ethernet/fujitsu/Kconfig" source "drivers/net/ethernet/fungible/Kconfig" source "drivers/net/ethernet/google/Kconfig" source "drivers/net/ethernet/hisilicon/Kconfig" source "drivers/net/ethernet/huawei/Kconfig" source "drivers/net/ethernet/i825xx/Kconfig" source "drivers/net/ethernet/ibm/Kconfig" source "drivers/net/ethernet/intel/Kconfig" source "drivers/net/ethernet/xscale/Kconfig"

config JME tristate "JMicron(R) PCI-Express Gigabit Ethernet support" depends on PCI select CRC32 select MII help This driver supports the PCI-Express gigabit ethernet adapters based on JMicron JMC250 chipset.

  To compile this driver as a module, choose M here. The module
  will be called jme.

config KORINA tristate "Korina (IDT RC32434) Ethernet support" depends on MIKROTIK_RB532 || COMPILE_TEST select CRC32 select MII help If you have a Mikrotik RouterBoard 500 or IDT RC32434 based system say Y. Otherwise say N.

config LANTIQ_ETOP tristate "Lantiq SoC ETOP driver" depends on SOC_TYPE_XWAY help Support for the MII0 inside the Lantiq SoC

config LANTIQ_XRX200 tristate "Lantiq / Intel xRX200 PMAC network driver" depends on SOC_TYPE_XWAY help Support for the PMAC of the Gigabit switch (GSWIP) inside the Lantiq / Intel VRX200 VDSL SoC

source "drivers/net/ethernet/adi/Kconfig" source "drivers/net/ethernet/litex/Kconfig" source "drivers/net/ethernet/marvell/Kconfig" source "drivers/net/ethernet/mediatek/Kconfig" source "drivers/net/ethernet/mellanox/Kconfig" source "drivers/net/ethernet/meta/Kconfig" source "drivers/net/ethernet/micrel/Kconfig" source "drivers/net/ethernet/microchip/Kconfig" source "drivers/net/ethernet/mscc/Kconfig" source "drivers/net/ethernet/microsoft/Kconfig" source "drivers/net/ethernet/moxa/Kconfig" source "drivers/net/ethernet/myricom/Kconfig"

config FEALNX tristate "Myson MTD-8xx PCI Ethernet support" depends on PCI select CRC32 select MII help Say Y here to support the Myson MTD-800 family of PCI-based Ethernet cards. http://www.myson.com.tw/

source "drivers/net/ethernet/ni/Kconfig" source "drivers/net/ethernet/natsemi/Kconfig" source "drivers/net/ethernet/neterion/Kconfig" source "drivers/net/ethernet/netronome/Kconfig" source "drivers/net/ethernet/8390/Kconfig" source "drivers/net/ethernet/nvidia/Kconfig" source "drivers/net/ethernet/nxp/Kconfig" source "drivers/net/ethernet/oki-semi/Kconfig"

config ETHOC tristate "OpenCores 10/100 Mbps Ethernet MAC support" depends on HAS_IOMEM && HAS_DMA select MII select PHYLIB select CRC32 select BITREVERSE help Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.

config OA_TC6 tristate "OPEN Alliance TC6 10BASE-T1x MAC-PHY support" depends on SPI select PHYLIB help This library implements OPEN Alliance TC6 10BASE-T1x MAC-PHY Serial Interface protocol for supporting 10BASE-T1x MAC-PHYs.

  To know the implementation details, refer documentation in
  <file:Documentation/networking/oa-tc6-framework.rst>.

source "drivers/net/ethernet/packetengines/Kconfig" source "drivers/net/ethernet/pasemi/Kconfig" source "drivers/net/ethernet/pensando/Kconfig" source "drivers/net/ethernet/qlogic/Kconfig" source "drivers/net/ethernet/brocade/Kconfig" source "drivers/net/ethernet/qualcomm/Kconfig" source "drivers/net/ethernet/rdc/Kconfig" source "drivers/net/ethernet/realtek/Kconfig" source "drivers/net/ethernet/renesas/Kconfig" source "drivers/net/ethernet/rocker/Kconfig" source "drivers/net/ethernet/samsung/Kconfig" source "drivers/net/ethernet/seeq/Kconfig" source "drivers/net/ethernet/sgi/Kconfig" source "drivers/net/ethernet/silan/Kconfig" source "drivers/net/ethernet/sis/Kconfig" source "drivers/net/ethernet/sfc/Kconfig" source "drivers/net/ethernet/smsc/Kconfig" source "drivers/net/ethernet/socionext/Kconfig" source "drivers/net/ethernet/stmicro/Kconfig" source "drivers/net/ethernet/sun/Kconfig" source "drivers/net/ethernet/sunplus/Kconfig" source "drivers/net/ethernet/synopsys/Kconfig" source "drivers/net/ethernet/tehuti/Kconfig" source "drivers/net/ethernet/ti/Kconfig" source "drivers/net/ethernet/toshiba/Kconfig" source "drivers/net/ethernet/tundra/Kconfig" source "drivers/net/ethernet/vertexcom/Kconfig" source "drivers/net/ethernet/via/Kconfig" source "drivers/net/ethernet/wangxun/Kconfig" source "drivers/net/ethernet/wiznet/Kconfig" source "drivers/net/ethernet/xilinx/Kconfig" source "drivers/net/ethernet/xircom/Kconfig"

endif # ETHERNET