linux-yocto/Documentation/ABI/testing/dev-kmsg

What: /dev/kmsg Date: Mai 2012 KernelVersion: 3.5 Contact: Kay Sievers kay@vrfy.org Description: The /dev/kmsg character device node provides userspace access to the kernel's printk buffer.

	Injecting messages:
	Every write() to the opened device node places a log entry in
	the kernel's printk buffer.

	The logged line can be prefixed with a <N> syslog prefix, which
	carries the syslog priority and facility. The single decimal
	prefix number is composed of the 3 lowest bits being the syslog
	priority and the higher bits the syslog facility number.

	If no prefix is given, the priority number is the default kernel
	log priority and the facility number is set to LOG_USER (1). It
	is not possible to inject messages from userspace with the
	facility number LOG_KERN (0), to make sure that the origin of
	the messages can always be reliably determined.

	Accessing the buffer:
	Every read() from the opened device node receives one record
	of the kernel's printk buffer.

	The first read() directly following an open() always returns
	first message in the buffer; there is no kernel-internal
	persistent state; many readers can concurrently open the device
	and read from it, without affecting other readers.

	Every read() will receive the next available record. If no more
	records are available read() will block, or if O_NONBLOCK is
	used -EAGAIN returned.

	Messages in the record ring buffer get overwritten as whole,
	there are never partial messages received by read().

	In case messages get overwritten in the circular buffer while
	the device is kept open, the next read() will return -EPIPE,
	and the seek position be updated to the next available record.
	Subsequent reads() will return available records again.

	Unlike the classic syslog() interface, the 64 bit record
	sequence numbers allow to calculate the amount of lost
	messages, in case the buffer gets overwritten. And they allow
	to reconnect to the buffer and reconstruct the read position
	if needed, without limiting the interface to a single reader.

	The device supports seek with the following parameters:
	SEEK_SET, 0
	  seek to the first entry in the buffer
	SEEK_END, 0
	  seek after the last entry in the buffer
	SEEK_DATA, 0
	  seek after the last record available at the time
	  the last SYSLOG_ACTION_CLEAR was issued.

	The output format consists of a prefix carrying the syslog
	prefix including priority and facility, the 64 bit message
	sequence number and the monotonic timestamp in microseconds,
	and a flag field. All fields are separated by a ','.

	Future extensions might add more comma separated values before
	the terminating ';'. Unknown fields and values should be
	gracefully ignored.

	The human readable text string starts directly after the ';'
	and is terminated by a '\n'. Untrusted values derived from
	hardware or other facilities are printed, therefore
	all non-printable characters and '\' itself in the log message
	are escaped by "\x00" C-style hex encoding.

	A line starting with ' ', is a continuation line, adding
	key/value pairs to the log message, which provide the machine
	readable context of the message, for reliable processing in
	userspace.

	Example:
	7,160,424069,-;pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
	 SUBSYSTEM=acpi
	 DEVICE=+acpi:PNP0A03:00
	6,339,5140900,-;NET: Registered protocol family 10
	30,340,5690716,-;udevd[80]: starting version 181

	The DEVICE= key uniquely identifies devices the following way:
	  b12:8        - block dev_t
	  c127:3       - char dev_t
	  n8           - netdev ifindex
	  +sound:card0 - subsystem:devname

	The flags field carries '-' by default. A 'c' indicates a
	fragment of a line. All following fragments are flagged with
	'+'. Note, that these hints about continuation lines are not
	necessarily correct, and the stream could be interleaved with
	unrelated messages, but merging the lines in the output
	usually produces better human readable results. A similar
	logic is used internally when messages are printed to the
	console, /proc/kmsg or the syslog() syscall.

Users: dmesg(1), userspace kernel log consumers