c62fa612cf
Recent Rockchip SoCs have a new hardware block called Native Interface Unit (NIU), which gates clocks to devices behind them. These clock gates will only have a running output clock when all of the following conditions are met: 1. the parent clock is enabled 2. the enable bit is set correctly 3. the linked clock is enabled To handle them this code registers them as a normal gate type clock, which takes care of condition 1 + 2. The linked clock is handled by using runtime PM clocks. Handling it via runtime PM requires setting up a struct device for each of these clocks with a driver attached to use the correct runtime PM operations. Thus the complete handling of these clocks has been moved into its own driver. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20241211165957.94922-5-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
1.2 KiB
SPDX-License-Identifier: GPL-2.0
Rockchip Clock specific Makefile
obj-$(CONFIG_COMMON_CLK_ROCKCHIP) += clk-rockchip.o
clk-rockchip-y += clk.o clk-rockchip-y += clk-pll.o clk-rockchip-y += clk-cpu.o clk-rockchip-y += clk-half-divider.o clk-rockchip-y += clk-inverter.o clk-rockchip-y += clk-mmc-phase.o clk-rockchip-y += clk-muxgrf.o clk-rockchip-y += clk-ddr.o clk-rockchip-y += gate-link.o clk-rockchip-$(CONFIG_RESET_CONTROLLER) += softrst.o
obj-$(CONFIG_CLK_PX30) += clk-px30.o obj-$(CONFIG_CLK_RV110X) += clk-rv1108.o obj-$(CONFIG_CLK_RV1126) += clk-rv1126.o obj-$(CONFIG_CLK_RK3036) += clk-rk3036.o obj-$(CONFIG_CLK_RK312X) += clk-rk3128.o obj-$(CONFIG_CLK_RK3188) += clk-rk3188.o obj-$(CONFIG_CLK_RK322X) += clk-rk3228.o obj-$(CONFIG_CLK_RK3288) += clk-rk3288.o obj-$(CONFIG_CLK_RK3308) += clk-rk3308.o obj-$(CONFIG_CLK_RK3328) += clk-rk3328.o obj-$(CONFIG_CLK_RK3368) += clk-rk3368.o obj-$(CONFIG_CLK_RK3399) += clk-rk3399.o obj-$(CONFIG_CLK_RK3568) += clk-rk3568.o obj-$(CONFIG_CLK_RK3576) += clk-rk3576.o rst-rk3576.o obj-$(CONFIG_CLK_RK3588) += clk-rk3588.o rst-rk3588.o