It can't be built without gtk3:
No package 'gtk+-3.0' found
So make it have the same DISTRO_FEATURES as gtk3. It may also support gtk2, but
it depends on wxwidgets which doesn't support gtk2, so we don't have to
consider that.
And python3-wxgtk4 doesn't have PACKAGECONFIG, so remove the checking for
PACKAGECONFIG.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Trevor Gamblin <trevor.gamblin@windriver.com>
Pass option '--baselib=${baselib}' to WX_CONFIG to support multilib
build.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Trevor Gamblin <trevor.gamblin@windriver.com>
- remove x11 features-check because there aren't dependencies that would
explicilty require x11 as a DISTRO_FEATURE
- use POSIX basename() to fix up musl build
============================
GParted 1.4.0 (2022-03-28)
============================
Release Notes
-------------
This release of GParted includes enhancements, bug fixes and
language translation updates.
* Add labelling of mounted btrfs, ext2/3/4 and xfs file systems
* Fix detection of mount points for encrypted file systems
* Fix crash scrolling quickly in the drive selection combobox
* Add bcache detection
* Add JBD external EXT3/4 journal detection
Bug Fixes
---------
* Add labelling of mounted btrfs, ext2/3/4 and xfs file systems (#163, !87)
* Fix detection of mount points for encrypted file systems (#162, !88)
* Fix unmount error when unmounting below a bind mount point (!89)
* Fix crash scrolling quickly in the drive selection combobox (#165, !91)
* Add initial Indonesian translation of help (!90)
* Add accessibility relations for screen readers like Orca (!92)
* Fix partition creation at sector 2048 if partition before it (#172, !93)
* Make more getter methods use return-by-constant-reference (!94)
* Check copy destination instead of source (!95)
* Add bcache detection (#183, !96)
* Add JBD external EXT3/4 journal detection (#89, !97)
* Fix translation of DocBook markup tag of the GParted Manual (!98)
Code Credits
------------
Code enhancements are courtesy of Movie Ma, Pascal Engélibert, and
Mike Fleetwood.
Translations (new/updated)
--------------------------
cs(Marek Černocký), da(Alan Mortensen), eu(Asier Sarasua Garmendia),
fur(Fabio Tomat), he(Yaron Shahrabani), hr(Goran Vidović),
hu(Balázs Úr), id(Andika Triwidada), it(Milo Casagrande),
ko(Seong-ho Cho), lt(Aurimas Černius), lv(Rūdolfs Mazurs),
nb(Kjell Cato Heskjestad), nl(Nathan Follens), pa(A S Alam),
pt(Hugo Carvalho), ru(Aleksandr Melman, Sergej A), sk(Dušan Kazik),
sl(Matej Urbančič), sr(Мирослав Николић), zh_CN(Luming Zh)
Dependencies (new/updated)
--------------------------
* n/a
Signed-off-by: Markus Volk <f_l_k@t-online.de>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
We do not carry recipe for libcerf, so disable it explicitly so the
native builds are also a bit more deterministic.
Fix a typo in knob to disable wxwidgets
Signed-off-by: Khem Raj <raj.khem@gmail.com>
These patches are not used by the grpc recipe so remove them.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Dropped patch which is merged upstream:
0001-v84-Make-setup_options-definitions-as-extern.patch
Refreshed patch:
0001-drbd-utils-support-usrmerge.patch
The compiled binaries are not linked to LDFLAGS options provided
by the build system cause QA issue:
do_package_qa: QA Issue: File /usr/sbin/drbdmon in package
drbd-utils doesn't have GNU_HASH (didn't pass LDFLAGS?)
Add LDFLAGS when linking drmdmon binary.
Suppress new Clang warning -Wdefaulted-function-deleted and -Wunused-private-field
Signed-off-by: Sakib Sajal <sakib.sajal@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
This reverts commit c4c2a90040.
This update fails to build python3-kiwisolver, it works ok with 1.2.0
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Cc: Wang Mingyu <wangmy@fujitsu.com>
Building with wayland and opengl in DISTRO_FEATURES without x11 as
well was giving the error:
wxwidgets: PACKAGECONFIG[no_gui] Conflict package config 'opengl' set in PACKAGECONFIG.
Upon some investigation, it looks like wxwidgets now supports building
against Gtk's Wayland support, so we can also enable it if wayland is
in DISTRO_FEATURES. For OpenGL, however, wxwidgets seems to have a
dependency on libglu, so the DISTRO_FEATURES check has been changed
to only enable it by default if both x11 and opengl are configured.
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
The sed commands to link with libatomic don't match and is therefore
useless. If they are really needed the problem should be fixed in the
code for example with CHECK_LIBRARY_EXISTS.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The CMake gRPC config checks for binaries and fails if a binary (plugin)
is missing. Fix the problem in the code and add the CMake gRPC config
back to the target package.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The v73 version tries to build and run a test program at compile
time to check whether compiler supports sizeof and expression statements
and sets HAVE_STATEMENT_EXPR accordingly. This requires EXEWRAPPER_ENABLED
in meson.bbclass to be True and qemu-usermode to be working.
In cases when EXEWRAPPER_ENABLED is False, build fails with error:
| ../git/meson.build:213:0: ERROR: Can not run test applications in
this cross environment.
We don't really need to do this as these have been supported since gcc3 and can set the configs to 1.
The autotools implementation also used to set it to 1 so this doesn't change anything:
https://github.com/pmem/ndctl/blob/v72.1/configure.ac#L70
Signed-off-by: Naveen Saini <naveen.kumar.saini@intel.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Do not inherit binconfig-disabled as pcre2-config is not required by
upstream.
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
It sets 'libdir' with path element 'lib' directly which is not suitable
for multilib. Add an option '--baselib' for wx-config to support
multilib when cross compile.
And set EGREP for wx-config to avoid host contamination.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
No need to put the pressure of this also on Khem. I am actively working
on this for Oniro and will support this work also upstream here.
Signed-off-by: Stefan Schmidt <stefan.schmidt@huawei.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Wpantund is part of the OpenThread project. It is used in a scenario
where the Thread radio operates as a network co-processor (NCP) that is
connected over SPI/UART/USB to the host.
The project itself is in maintenance-only mode right now as the NCP
architecture has been replaced with radio co-processor (RCP) which is
implemented directly in openthread and ot-br-posix. None the less there
might still be project and products out there using it.
Signed-off-by: Stefan Schmidt <stefan.schmidt@huawei.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The OpenThread daemon allows Linuxes devices to participate in a Thread
mesh network without acting as a full border router. The device
participates like any other child or router devices within the network.
This same repo is used for range of different modes to run the
OpenThread code. From bare metal over vendor SDKs to posix platforms.
For this recipe the focus is on the Linux posix implementation and we do
not pull in all the git submodules on purpose.
There are openthread enabled recipes in meta-zephyr for people who want
to also use OpenThread on MCU based platforms on top of Zephyr.
Signed-off-by: Stefan Schmidt <stefan.schmidt@huawei.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The OpenThread project is an open source implementation of the Thread
low-power mesh network protocol. In a Thread network devices can have
different roles, and of of these roles is a Border Router that allows a
Thread network to be connected with other IP networks.
Ot-br-posix runs as a systemd service on a standard Linux system to
handle the connection to a Thread network.
In terms of patches we need a fix to allow building on musl + clang
(CMSG_NXTHDR macro triggers a -Wsign-compare warning) and a systemd
unit file change is OE specific and avoids having service dependencies
implemented as pre exec hooks.
Signed-off-by: Stefan Schmidt <stefan.schmidt@huawei.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
build failed with:
ln: failed to create symbolic link '...srecord-1.64/configure.ac': File exists
As expected, the existing file was a symlink pointing to etc/configure.ac
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
remove patch 0001-fix-undefined-bswap32-and-bswap64-errors-for-MIPS-ma.patch
Upstream Status: Accepted [17a2b964ca]
subtree update: ecb0996fd2..bc6c44b920
Nikias Bassen (4):
[github-actions] Use windows-2019 instead of windows-latest for now
socket: Add socket_get_socket_port function
utils: Close file if buffer allocation fails in
buffer_read_from_filename()
Updated README with pkg-config requirement
Potin Lai (1):
Fix undefined bswap32 and bswap64 for MIPS machine
Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The git repo for multipath-tools was changed, so update the
SRC_URI accordingly with the new link.
Signed-off-by:Minjae Kim <flowergom@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Patch for CVE-2017-12858 is applied in version 1.2.0.
Signed-off-by: matsunaga-shinji <shin.matsunaga@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Patch for CVE-2018-1050 is applied in version 4.5.15, 4.6.13, 4.7.5.
Patch for CVE-2018-1057 is applied in version 4.3.13, 4.4.16.
Signed-off-by: matsunaga-shinji <shin.matsunaga@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
fluidsynth 2.2.5
* Fix a build failure with CMake < 3.12 (#1003, thanks to @komh)
* OSS and MidiShare drivers are now deprecated (#1010)
* Prevent samples accidentally having their loops disabled (#1017)
* Fix framework installation on MacOS (#1029, thanks to @pedrolcl)
Pls. note that fluidsynth 2.3.0 will require CMake >= 3.13
fluidsynth 2.2.6
* Undeprecation and minor revisal of the OSS driver (#1038)
* Minor improvements to CoreAudio and CoreMidi drivers (#1047, thanks to @bradhowes)
* Fix sustained voices being held after ALL_CTRL_OFF (#1049)
* Fix clobbering of PORTAMENTO_CTRL after ALL_CRTL_OFF (#1050)
* Prevent Modulation Envelope from being stuck in decay phase, causing detuned voices and potentially other audible glitches for some soundfonts (#1059)
* Fix a compilation issue with recent glib (#1063, thanks to @devingryu)
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
* Patch to fix simdtests.cpp was merged
* guess who initially wrote simdtests.cpp :)
Changes
* Add waf autooption --example-tools to allow optional build of executables, libraries and man pages provided by jack-example-tools (the files are built by default).
* Building and installing the additional files can be disabled by using --example-tools=no or --no-example-tools.
* Fix 32-bit support in ALSA driver
* Fix incomplete ASIO support on Windows
* Fix metadata usage with multiple users
* Fix netsource tool missing on Windows
* Fix semaphore usage on macOS
* Official FreeBSD support
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
=========
core:
* Fix underline sometimes being drawn only partially
* Fix Adobe Reader not reading some of the contents we write correctly
* Fix code that workarounds some broken-ish files
* FoFiTrueType: Parse CFF2 fonts too
* FoFiTrueType: Support cmap types 2 and 13
* Fix a few small memory leaks
* code improvements
qt:
* Handle SaveAs named action
* Annotations: don't change the text color when changing the font
utils:
* pdftotext: print creation and modification date when using htmlmeta param
glib:
* Fix returning internal data of temporary strings
cpp:
* Fix code incompatibility with MSVC
build system:
* poppler internal library is no longer forced to static on MSVC
* Error out if iconv is not available and the cpp frontend is enabled
* Require FreeType 2.8
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
UPower automatically detects location of udev-rules by asking udev's pkgconfig
variable 'udev_dir' and appending 'rules.d'. This does not work for non
systemd's udev:
| Files/directories were installed but not shipped in any package:
| /usr/rules.d
| /usr/rules.d/95-upower-hid.rules
| /usr/rules.d/95-upower-wup.rules
To avoid, set udevrulesdir explicitly for non-systemd builds.
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Port to meson turned into total overhaul of recipe
Version 0.99.17
---------------
Released: 2022-03-09
Bug fixes:
- Fix FD handling issues that may cause lid to not be detected
Version 0.99.16
---------------
Released: 2022-02-23
Bug fixes:
- Silence unnecessary udev event warnings
- Increase test timeout (#171)
- Explicitly link with plist
- Fix UpClient reference leak
- Fix DisplayDevice state on battery hotplug
- Fix critical action to work after it was cancelled (#172)
Version 0.99.15
---------------
Released: 2022-02-09
Bug fixes:
- Various build fixes
- Update bluetooth device alias when it changes (#169)
No info for 0.99.14
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Add COMPATIBLE_HOST to fix build error when musl is enabled,
this will match efivar requirements.
Signed-off-by: Davide Gardenal <davide.gardenal@huawei.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
