Software layers were previously allowed to change signatures, but
that's not desired for those layers either. The rule that a layer
which is "Yocto Compatible 2.0" must not change signatures unless
explicitly requested holds for all kinds of layers.
However, as this is something that software layers might not be able
to do right away, testing for signature changes in software layers can
be disabled. It's on by default, as that was Richard's
recommendation. Whether that should change needs further discussion as
part of finalizing "Yocto Compatible 2.0".
As it might still change, the tool now has both a with/without
parameter so that users of the tool can choose the desired behavior
without being affected by future changes to the default.
(From OE-Core rev: e7fe215f50a1b75771f33fffdda529a95c026d3f)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "test_signatures" test ignored a broken world build when getting
signatures, but the code which then tried to analyze a difference
found by the test didn't, which prevented printing the difference.
(From OE-Core rev: e8416554dfc9d4196543279a4845f6c0671f3e5c)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
add_layer_dependencies() might get called more than once, or one of
the layer dependencies might already be present. The function should
not add layers again because doing so can cause warnings like:
WARNING: Duplicate inclusion for .../meta-openembedded/meta-oe/conf/distro/include/meta_oe_security_flags.inc in .../meta-openembedded/meta-oe/conf/layer.conf
(From OE-Core rev: 4afb7c3c505a4d21906f07f88c966b794a968cbc)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved remaining API to misc.py.
Removed runner.py.
Now misc.py is ready to be moved to the scripts/lib/wic and
utils directory can be removed.
(From OE-Core rev: 327e340a29d330f24117e24d0649fa156017208f)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wic updates fstab if mount points are specified in .wks.
After partition images are created the original fstab is restored.
However, if exception is raised when partition image being prepared
wic doesn't restore original fstab. This can cause duplication of
added lines in fstab when 'wic create' runs next time.
Wrapping call of 'prepare' method and restoring original fstab
even if exception occurs should fix this.
[YOCTO #11633]
(From OE-Core rev: 29f7735030d383f9614bdb148b52a47c79f05eea)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved misc.py from wic/utils/ to wic/
Removed wic/utils directory
(From OE-Core rev: df906f3caa0721756f5ed48fa657e62e05ae2aa3)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove user-specific descrition files and config fragments from main machine
description file otherwise double patch/config inclusion may happen. These
files/fragments are already included on the SRC_URI (see poky commit 2db8f3),
so no need to reference these inside machine.scc files.
[YOCTO #11586]
(From meta-yocto rev: 86ab7ab6688f250bb5777371d2cbc28c770847d4)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added support for removing directories using mdeltree
utility to Disk.del method
[YOCTO #11283]
(From OE-Core rev: a5fc61d8f290d370f4bc51d4e2a67a5580edb1b1)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added implementation of Disk.del method and wic_r
function that removes files from the vfat partition
using mdel utility.
[YOCTO #11283]
(From OE-Core rev: 4abf2d2643c58322d96d63d5f3ffaf52d62c6792)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added empty 'wic rm' command that does nothing.
The functionality will be added by the next commits.
[YOCTO #11283]
(From OE-Core rev: f8e42c13609c482359fbdb225fb16a45101ae9ae)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added wic_rm_help and wic_rm_usage variables to help.py.
These variables contain help content that will be used in
'wic rm help' and 'wic rm --help' output.
(From OE-Core rev: b6894538b2a426762a07c0e7b014a04f4e00266d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added implementation of Disk.copy method and wic_cp
function that copies files/directories to the vfat partition
of the partitioned image.
[YOCTO #11283]
(From OE-Core rev: 416e4599960987f0ce31b3f16f3c6af0bf633a26)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This method copies partition image into the wic image.
It will be used in 'wic cp' and 'wic rm' subcommands
to copy changed partition back into wic image.
(From OE-Core rev: 7a7e6635e2e2ddfff2bca58c860634b7a199b0df)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed calculation of the dst file size using skip, seek and
length parameters. Current code does it incorrectly which
causes sparse_copy API to create unnecessary big output files.
(From OE-Core rev: e6d709a6382e4b913612f597e66ad07b0e351d5f)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If lenght parameter is provided to sparse_copy call
it's mandatory to check if the output file is fully
written after reading unmapped block from input file.
If it's not done then sparse_copy can write more data
than specified length.
(From OE-Core rev: 289b1767182982dfb6912e64481150697ba93e4d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Renamed parameter offset->skip to match names of dd
parameters.
Changed affected sparse_copy calls.
Added explanation of the parameters to docstring.
(From OE-Core rev: 08e2f4e59816c5757686255b267b08cbc46fbd95)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added property that points to the mcopy executable.
(From OE-Core rev: 05badb6427442388b9bea04c8b184a2ce92362ec)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added generic helper to use in property methods to
access commands in a lazy manner.
(From OE-Core rev: 4c1ded3ddbd04ad1640620ec1348831692a93dbe)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added empty 'wic cp' command that does nothing.
The functionality will be added by the next commits.
[YOCTO #11283]
(From OE-Core rev: f0dcf39d52185430422cb0c94c7fe99c12764acd)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added wic_cp_help and wic_cp_usage variables to
help.py. These variables contain help content that
will be used in 'wic cp help' and 'wic cp --help'
output.
[YOCTO #11283]
(From OE-Core rev: f3f0dadada1e297f2b54fa320bb817da7f755c1f)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added empty 'wic ls' command that does nothing.
The functionality will be added by the next commits.
(From OE-Core rev: ba4613469cc2c3d3433be2e2f520f4fff6b3b333)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added wic_ls_help and wic_ls_usage variables to
help.py. These variables contain help content that
will be used in 'wic ls help' and 'wic ls --help'
output.
(From OE-Core rev: 5152f993777550e5e8a420db4d1f3c4370cd1d33)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Plugin code uses boot.img file name for an image file. If there are
two partitions that use bootimg-pcbios wic breaks with an error
"file already exists: boot.img"
Made image file name unique by adding wks like number to it to fix
the issue.
(From OE-Core rev: eec6e946cce36cba304851fa4a1c1d7bfd7b0bed)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added parameter 'length' to specify amount of data
to write into destination file. This is useful when only
part of source file should be written into destination file.
(From OE-Core rev: cc44e2eb3b5027a3531e6349937a23d73313b3c6)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed bug in processing 'skip' parameter:
don't read input file if end of bmap block is less than skip
Simplified logic of positioning to the start of data inside a
partially skipped bmap block.
(From OE-Core rev: c19f78a0713c8ac9d28b78f86c6d7b96157788f0)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Include missing description files and configuration fragments into the SRC_URI.
[YOCTO #10918]
(From meta-yocto rev: e57f92996e71d4085ebaa41e802bea3cc1466cd7)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If for any reason the parse_recipe fail in extract command
the process gets locked because Cooker is expecting the
finish event by tinfoil.
For example:
$ devtool extract remake /tmp/remake
ERROR: remake is unavailable:
remake was skipped: PREFERRED_PROVIDER_virtual/make set to make, not remake
(From OE-Core rev: 2c0062b59178fa668b26487b6d2f1e81a0d868e0)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The SMP kernel config presents issues on qemuarm because:
CONFIG_SMP=y
Dependencies Missing:
- CPU_V6K or CPU_V7:
These are selected by setting:
CONFIG_ARCH_MULTI_V7=y
or
CONFIG_ARCH_MULTI_V6=y
But our QEMU + ARM BSPs are based on armv4/v5 hence they are
incompatible with CONFIG_SMP.
This patch fixes the script, and avoids offering SMP to the user
when the created BSP is based on QEMU + ARM.
[YOCTO #11426]
(From meta-yocto rev: d63aa4acd20b2aa022701289e9ab7be7f551b0b2)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was overlooked when msger was removed in 28014087b8.
(From OE-Core rev: b561292c4e7b5578172066f82b6518b5bda53f42)
Signed-off-by: Kristian Amlie <kristian.amlie@mender.io>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These files should be removed as version 4.8 is no longer supported (6751dce4cf
and 1632f6623c) and errors may be produced when executing some commands.
For instance, "yocto-bsp list <karch> --property <property_name>" expects the
SRC_URI of the 4.8 kernel recipe, which doesn't exist anymore, throwing the
following exception:
$ yocto-bsp list arm --property existing_kbranch
Getting branches from remote repo None...
Traceback (most recent call last):
...
SyntaxError: function specified for 'gen' property returned nothing : input type:
"choicelist" name:"existing_kbranch" nameappend:"i386" gen:"bsp.kernel.all_branches"
branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this
BSP on:" default:"standard/base"
[YOCTO #9867]
(From meta-yocto rev: fb0ed1cdeac9e716d1eaa5b11c8262a209bf148e)
Signed-off-by: Daniela Plascencia <daniela.plascencia@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
isoimage-isohybrid plugin fails with this error when
trying to find initrd image:
initrd = glob.glob('%s/%s*%s.%s' % (initrd_dir, image_name, target_arch, image_type))[0]
IndexError: list index out of range
as it uses TRANSLATED_TARGET_ARCH value as part of the image.
This approach stopped to work due to changes in oe core code.
initrd file name is made using MACHINE variable. wic can't get value
of this variable as it's not included into bitbake -e output.
Used basename of deploy dir as MACHINE value to fix the breakage.
(From OE-Core rev: cfbb3cc1279ea88ca3e2867f8a409c5120aa1f05)
(From OE-Core rev: e26fa1c34c33ffdc678f8073dade0126aff08b40)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The remote script is run with `set -e`, so doing rm without -f on a
$file that is already gone will exit the whole script, failing any
redeployment. Assume a use case where packages sometimes produces
certain test binaries stored on volatile media (tmpfs), and where the
system is occasionally rebooted.
(From OE-Core rev: db54c9a22a9b66c673df8e836de5e47fc9edda0b)
Signed-off-by: Daniel Lublin <daniel@lublin.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Either both or none of the paths must be passed through
os.path.abspath or things like 'A//B', 'A/./B/', and 'A/B/' in S will
cause unintentional mismatches even when B = "${S}".
Using os.path.abspath for both seems more likely to be correct as that
will also handle the case where ${B} != ${S} but the abspaths are
equal.
(From OE-Core rev: 061f2aab40fecbfe0dcb928baa95d6b3a6b45eed)
Signed-off-by: Ola x Nilsson <olani@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
find may be provided by busybox, which might be compiled without support
for -exec.
(From OE-Core rev: 404e8e3661469175e1ea087ebfaf3a7867bf4df2)
Signed-off-by: Daniel Lublin <daniel@lublin.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Perf is a tool build from the kernel source, which is normally available
in /work-shared/..., but when devtool is used to modify the kernel
source code, perf is not buildable since it gets an error about being unable
to add a depends to a non-exisit task do_patch.
This patch removes do_patch from the SRCTREECOVEREDTASKS and creates an empty
do_patch task to enable the VarFlags code to have someplace to attach depends
information to.
[YOCT #11120]
(From OE-Core rev: 86c793595e560e7bc52e3cd2a2752746e6adcb76)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since recipe-specific sysroots were implemented, devtool add and devtool
upgrade operations that fetch from a URL that requires native sysroot
dependencies will fail to work as there is no recipe-specific sysroot
set up for them during fetching. An example was any URL pointing to a
tarball compressed with xz, e.g. devtool upgrade on gnutls.
The most expedient way to fix this is to set up a dummy recipe-specific
sysroot to use for the fetch/unpack operations. We do this in the same
manner as bitbake -b does, so we're just taking all of the sysroot
components available and creating a sysroot from those rather than
ensuring the correct dependencies are there - this means that we're
still going to have problems if e.g. xz-native hasn't been built yet,
but that issue will be trickier to solve and is tracked separately.
Fixes [YOCTO #11474].
(From OE-Core rev: 559151e783759af78b5cdd76cdbb9ce325a391e6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For git repositories in the absence of any other indicator, it's not an
unreasonable assumption that the name of the repository is the name of
the software package it contains, so use that as PN if we don't have
anything else.
(From OE-Core rev: ef73fa70f0955912b0da140922465a3c817424e9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a value we extract from a spec file contains an unexpanded macro
(e.g. %{macroname}) then we should discard it since we're not seeing the
actual value and we don't have an easy way of expanding it at the
moment.
This fixes for example getting %{name} as the recipe name when running
the following:
recipetool create https://github.com/gavincarr/mod_auth_tkt.git
(From OE-Core rev: eee56a19cda051da6267f808cd3a04a4c644acb3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add missing parameters -c to and remove non-existent
parameter -i from usage string for 'wic create'.
(From OE-Core rev: da937e0e2478152968d5fd5eec7dd8cc2b922afb)
Signed-off-by: Andreas Reichel <andreas.reichel.ext@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* optparse is deprecated and will not be developed further
(see: https://docs.python.org/2/library/optparse.html)
* argparse supports subcommands, which simplifies definition of
arguments and options
* reimplement help mechanism through sub-subcommands
[YOCTO #9636]
(From OE-Core rev: 4fe9635c72a6ee1becc47d832ab54724176ee811)
Signed-off-by: Andreas Reichel <andreas.reichel.ext@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was overlooked when f6a064d969 was merged.
(From OE-Core rev: 29a209822488ab687abdb1ceffdd9c7af5b3db68)
Signed-off-by: Kristian Amlie <kristian.amlie@mender.io>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a non-existent event - we already have the actual
bb.build.TaskSucceeded further down in the list hence why it wasn't
noticed earlier.
(From OE-Core rev: 4e059a5ceb6f44401154e89e37f56de1d664a7cb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a task such as do_fetch fails when we're extracting source for a
recipe (within devtool modify / upgrade / extract / sync) then we should
naturally stop processing instead of blundering on; in order to do that
we need to be listening for the TaskFailed event. Thanks to Richard
Purdie for noticing and fixing this.
(From OE-Core rev: 9174b845bf6a6be7753bf6b921959b1f3f2dcbc0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Most of the other extract-based commands have this option but oddly I
left it out for modify - I guess because if I was debugging an issue here
I just used devtool extract to do so, but there's no reason why we can't
have it here and it is useful.
(From OE-Core rev: 98fbc46e1a51237213bd7825a922389d3ab2ad9b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is fairly common that BSP layers enable recipes when choosing
machines from that layer without checking whether the recipe actually
builds in the current distro. That breaks "bitbake world", retrieving
signatures and thus the test_machine_signatures test.
It's better to let that test continue with the signatures that can be
retrieved and report the broken world build separately. Right now, the
new test_machine_world iterates over all machines. More elegant and
useful in combination with a (currently missing) selection of which
tests to run would be to generate one test instance per machine. But that
is not straightforward and has to wait.
The "-k" argument alone was not enough to proceed despite failures,
because bitbake then still returns a non-zero exit code. The existance
of the output file is taken as sign that the bitbake execution managed
was not fatally broken.
(From OE-Core rev: 02f5d7836b726e40fef82b50b8145acc839b360b)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Selecting a machine is only allowed to affect the signature of tasks
that are specific to that machine. In other words, when MACHINE=A and
MACHINE=B share a recipe foo and the output of foo, then both machine
configurations must build foo in exactly the same way. Otherwise it is
not possible to use both machines in the same distribution.
This criteria can only be tested by testing different machines in combination,
i.e. one main layer, potentially several additional BSP layers and an explicit
choice of machines:
yocto-compat-layer --additional-layers .../meta-intel --machines intel-corei7-64 imx6slevk -- .../meta-freescale
To simplify the analysis and limit the amount of output, mismatches
are sorted by task order such that tasks that run first are also
reported first. Following tasks for the same recipe and set of
machines then get pruned, because they are likely to be different
because of the underlying task (same approach as in
test_signatures). The difference here is that we get information about
all machines. The task order in the base configuration serves as
heuristic for sorting that merged list.
The test has already found issues in go-cross (depended on
tune-specific libgcc) and gdb-cross (had a tune-specific path
unnecessarily), so it is also useful to uncover issues that are not
caused by the BSP layer itself.
(From OE-Core rev: cb0d3de4540e412cfcb7804b4b1689141c80e3a1)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If devtool is called with a URL to a source repository containing a
node.js module, we don't know that until recipetool has fetched it, and
due to the structure of the code we have to exit with a special code in
order to let devtool know it needs to build nodejs-native. We also want
to suppress the error message that recipetool would normally print under
these circumstances; there is already a mechanism for this but it wasn't
operative in the case where we're pointed to a source repository rather
than an npm:// URL, so create some plumbing so that we know to hide the
message.
(From OE-Core rev: 0c2d0fbb1c6c5b82183799eb7ef80074f86bcfc4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If recipetool returns with exit code 14 this means devtool needs to
build nodejs-native and then call it again. If recipetool returns exit
code 14 again then clearly something has gone wrong and we should just
quit with an error.
(From OE-Core rev: 8d7cced6e06d7c2037f5ab75ac859f501129532e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The change over to recipe specific sysroots means that we can no longer
get a known location simply from configuration for the npm binary - we
need to get the recipe sysroot for nodejs-native, look there for npm if
we need to check it's present, and add that to PATH when calling out to
npm. Unfortunately this means anywhere we need to get that path we have
to have parsed all recipes, otherwise we have no reliable way of
resolving nodejs-native. Thus we have to change recipetool create to
always parse all recipes (the structure of the code does not allow us to
do this conditionally).
In the worst case, if npm hasn't already been added to its own sysroot
and we are fetching from a source repository rather than an npm
registry, this gets a bit ugly because we end up parsing recipes three
times:
1) recipetool startup, which then fetches the code and determines it's
a node.js module, finds that npm isn't available and then exits with
a specific error to tell devtool it needs to build npm
2) when we invoke bitbake -c addto_recipe_sysroot nodejs-native
3) when we re-invoke recipetool
This code is badly in need of refactoring, but now is unfortunately not
the time to do that, so we're going to have to live with this ugliness
for now.
Fixes [YOCTO #10992].
(From OE-Core rev: acfdbd796c99882b8586023c8c6b848716105c8d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OE-Core commit c0cfd9b1d54b05ad048f444d6fe248aa0500159e added handling
for AND / OR in license strings coming from npm, but made the assumption
that an & would always be present in the license value. Check if it's
there first so we don't fail if it isn't.
(From OE-Core rev: abe2955df2dc558de6068d9373dfcb47d690704b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
locked-sigs.inc groups tasks according to their tune flags (allarch,
i586, etc.). Also retrieve that information while getting signatures,
it will be needed to determine when setting a machine changes tasks
that aren't machine-specific.
(From OE-Core rev: 67f9a8759f47680dbf349797801b2a1e8d149377)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After filtering out potential false positives, it becomes feasible to
include the output of bitbake-diffsigs for those tasks which
definitely have a change.
Depends on bitbake-diffsigs with the "--signature" parameter.
Enhanced output now is:
AssertionError: False is not true : Layer meta-xxxx changed 120 signatures, initial differences (first hash without, second with layer):
gstreamer1.0-plugins-base:do_fetch: 76973f19f2e30d282152bdd7e4efe5bb -> e6e7c6fa9f2bd59d7d8d107f7c6ca1ac
Task dependencies changed from:
['PV', 'SRCREV', 'SRC_URI', 'SRC_URI[md5sum]', 'SRC_URI[sha256sum]', 'base_do_fetch']
to:
['GST_IMX_PATCHES_TO_APPEND', 'PV', 'SRCREV', 'SRC_URI', 'SRC_URI[md5sum]', 'SRC_URI[sha256sum]', 'base_do_fetch']
basehash changed from d679d30bd1ea41c56e57419b57587f3c to 090a79b45f5fa26d10f9d34e2ed7a1e6
List of dependencies for variable SRC_URI changed from '{'PV', 'SRC_URI[md5sum]', 'SRC_URI[sha256sum]'}' to '{'GST_IMX_PATCHES_TO_APPEND', 'PV', 'SRC_URI[md5sum]', 'SRC_URI[sha256sum]'}'
changed items: {'GST_IMX_PATCHES_TO_APPEND'}
Dependency on variable GST_IMX_PATCHES_TO_APPEND was added
Variable SRC_URI value changed:
" http://gstreamer.freedesktop.org/src/gst-plugins-base/gst-plugins-base-${PV}.tar.xz file://get-caps-from-src-pad-when-query-caps.patch file://0003-ssaparse-enhance-SSA-text-lines-parsing.patch file://0004-subparse-set-need_segment-after-sink-pad-received-GS.patch file://encodebin-Need-more-buffers-in-output-queue-for-bett.patch file://make-gio_unix_2_0-dependency-configurable.patch file://0001-introspection.m4-prefix-pkgconfig-paths-with-PKG_CON.patch file://0001-Makefile.am-don-t-hardcode-libtool-name-when-running.patch file://0002-Makefile.am-prefix-calls-to-pkg-config-with-PKG_CONF.patch file://0003-riff-add-missing-include-directories-when-calling-in.patch file://0004-rtsp-drop-incorrect-reference-to-gstreamer-sdp-in-Ma.patch [--] {+${GST_IMX_PATCHES_TO_APPEND}+}"
pulseaudio:do_install: 6bb6fe23e11a6d5fef9c3a25e73e4f9c -> 3f54ea75673a792e307197cfa6ef2694
basehash changed from ac4efcfa783bd04a5a98a2c38719aedd to 37679d99623a37c8df955da3a01415a5
Variable do_install value changed:
@@ -1,3 +1,7 @@
autotools_do_install
install -d ${D}${sysconfdir}/default/volatiles
install -m 0644 ${WORKDIR}/volatiles.04_pulse ${D}${sysconfdir}/default/volatiles/volatiles.04_pulse
+ if [ -e "${WORKDIR}/daemon.conf" ] && [ -e "${WORKDIR}/default.pa" ]; then
+ install -m 0644 ${WORKDIR}/daemon.conf ${D}${sysconfdir}/pulse/daemon.conf
+ install -m 0644 ${WORKDIR}/default.pa ${D}${sysconfdir}/pulse/default.pa
+ fi
[YOCTO #11161]
(From OE-Core rev: 312edd42b6cc553de4d476c76e8e36a882e11cdd)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added new parameter 'api' to sparse_copy function to specify
underlying filemap API to use. By default sparse_copy will
try both available APIs.
Added test case for sparse_copy to wic test suite.
(From OE-Core rev: 88701cef6ba399e82f96ed1b0eef9a44ed8c1687)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, runqemu grep root=/dev/sd or root=/dev/hd on the image, and
would use vda if no grep result, now we have set QB_DRIVE_TYPE to
"/dev/sd" by default, and the device will be /dev/sda, so use sda to
replace vda in the test case.
(From OE-Core rev: 3f1f42984021d87ac43aaa16f38b706c2c965e02)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Typically a single change cascades through the entire task dependency
chain. Developers had to figure that out themselves, based on hard to
read and interpret output (not sorted, no indention, no explanations):
$ yocto-compat-layer.py -n meta-xxxx
...
AssertionError: True is not false : Layer meta-xxxx changed signatures.
webkitgtk:do_install changed fe2edc9082bc0da98f9cb1391c52f565 -> b3a44684c5cd9aacd3f7c6ed88eefab5
gstreamer1.0-plugins-good:do_configure changed 3b2f8211be3fe08422bf6087f3af16d1 -> 7d80e42fa1f4f01ff4dfe2ea4477d382
pulseaudio:do_package_qa changed 5d0a58ada66ff17f5576555302ac319a -> 0e13bcb96143d1ae54c451bc3de0aa30
epiphany:do_prepare_recipe_sysroot changed 29e1b277dbcb005bd54950594c50d91b -> d3c45527b37677a0668ce483c6db3052
...
gst-player:do_packagedata changed 9ce6efdd357dd74919bc4957458b1e95 -> d0c083ce629f37adfc9c4ba9eff81f83
gstreamer1.0-plugins-base:do_install changed 1161cd867d15bea63e5dd5d9abf0519c -> 5bf2b652a2d77fee3eedb35af2f201a0
gstreamer1.0-rtsp-server:do_packagedata changed 6781dc3070f80b843ed1970d74dd323e -> 454620c2e3b9fea87e525d14b6ed0344
alsa-plugins:do_packagedata changed 1808c3f737cb805b169d004e948ea19c -> 480124b7fa5eab1f73bf96440d725231
Now the tool automates the problem analysis: it retrieves the depgraph
using the tinfoil API and only reports those tasks with modified
signatures whose dependencies have not changed, i.e. those tasks which
definitely introduce a change.
>From the previous example, that just leaves two tasks that need to be
checked:
AssertionError: False is not true : Layer meta-xxxx changed 120 signatures, initial differences (first hash without, second with layer):
gstreamer1.0-plugins-base:do_fetch: 76973f19f2e30d282152bdd7e4efe5bb -> e6e7c6fa9f2bd59d7d8d107f7c6ca1ac
pulseaudio:do_install: 668eb1e30af129df9806b0aa0d7c10cd -> 1196bdb88eef56eeee4613bb06b9387e
This pruning might be a bit too aggressive in the sense that tasks
which inherit a change and then add more changes themselves won't be
reported initially. They will be found when fixing the reported tasks
and re-running the check.
For a developer it seems better to have something listed which
definitely is a problem and needs fixing instead of everything,
including the tasks which don't need fixes.
(From OE-Core rev: 7ab0e09de75bfd7e7498bfa72d1f2f5d02a96747)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In commit 5b9ac62ab535d, one place was fixed where a command was
invoked such that failures caused double stack traces and stderr was
lost. The same problem also occurs elsewhere, triggered for example by
a layer with parsing problems.
Now a new utility method is used instead of repeating the code.
(From OE-Core rev: b6c72c0d169473e2626938be2ee59f850624612e)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using `wic create mkefidisk -e core-image-minimal', the following
error message appeared.
Please bake it with 'bitbake parted-native' and try again.
However, following this command doesn't do any help. The same problem
still appeared.
The problem is that when we 'bitbake parted-native', it doesn't have
anything to do with core-image-minimal. And the required tool 'parted'
is not under core-image-minimal's recipe-sysroot-native directory.
Improve the error message so that following it could get things done.
(From OE-Core rev: f0425c0a0f1c98f65bf61fd9aa7e023ed41a35fa)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
FIEMAP API is not supported by tmpfs file system, but
SEEK_HOLE/SEEK_DATA is supported.
Returned back FilemapSeek class that implements support
of SEEK_HOLE/SEEK_DATA API to make sparse_copy API working
on tmpfs again.
This reverts commit 6b80c13f7a.
(From OE-Core rev: e75bd6a7dd5c1b4bad039c35cf4a2ffc2f77c60a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The javascript console log messages are used in scraping, when
converting an html test report to html email. Before this patch a
console message indicating that all charts have been drawn was not
correctly sent if the last test failed (or didn't have chart data for
some other reason) which, in turn, caused oe-build-perf-report-email.py
script to fail with a timeout.
(From OE-Core rev: 79b90ae02257002ea831a48f6798794b7711c1f8)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The initial signatures need to be collected -after- the dependency layers have
been added to the system. Otherwise changes that happen due to dependencies,
outside of the layer being scanned, will show up as signature problems.
The add_layer function was split into two pieces so that we can process
the dependencies first, and then add the layer itself for the comparison.
(From OE-Core rev: 4eb0932e755b7cb582a8db811aeed1397ecb92cc)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When processing a layer for dependencies, you have to process the layer
itself, it's dependencies, the dependencies dependencies and so forth until
all items have been processed.
i.e.: LayerA requires LayerB requires LayerC requires layerD
The end result should be LayerB, LayerC and LayerD are all dependencies of
LayerA.
(From OE-Core rev: 6e0a268b750fb6701604dd936cd2cf3b47a6e804)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
devtool/runqemu.py was relying on STAGING_BINDIR_NATIVE to find the host
tools it needed like qemu-system-<arch>. In the post RSS world, this no
longer exists. This patch points it to
{STAGING_DIR}/{BUILD_ARCH}/{bindir_native}.
[YOCTO #11223]
(From OE-Core rev: 1910f9e9336bfedc8278a3bc02e7e7f934a4fc86)
Signed-off-by: brian avery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Script for sending build perf test reports as an email. Mangles an html
report, generated by oe-build-perf-report, into a format suitable for
html emails. Supports multipart emails where a plaintext alternative can
be included in the same email.
Dependencies required to be installed on the host:
- phantomjs
- optipng
[YOCTO #10931]
(From OE-Core rev: 9e97ff174458f7245fc27a4c407f21a9d2e317ab)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A new tool for pretty-printing build perf test results stored in a Git
repository. The scripts is able to produce either simple plaintext
report showing the difference between two commits, or, an html report
that also displays trendcharts of the test results. The script uses
Jinja2 templates for generating HTML reports so it requires
python3-jinja2 to be installed on the system.
[YOCTO #10931]
(From OE-Core rev: 3b25404f0f99b72f222bdca815929be1cf1cee35)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we do not set the 64 bit flags, newer kernels seem to build 64bit
config files by default. This is due to a hard-coded uname -m check that
selects the KBUILD_DEFCONFIG based on the host, not the cross target.
Similar to e9ec769926b2378e63380bd7762ce7ce201af151 in the yocto-kernel-cache repo
(From meta-yocto rev: e35017cc67f6d3c5cc00488d3460de0dcec773b3)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These parameters are copied from the ext image class.
-D will let fsck perform further directory optimizations
-v might be helpful for debugging purpose
(From OE-Core rev: be93e378506a85772503005294503cfc348a552c)
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is not much sense in creation of empty squashfs
partition. It's also not possible to create empty squashfs
partition of specified size.
Even more, prepare_empty_partition_squashfs method is
absolutely broken. It raises exception when called and
even its signature differs from the rest of of similar
methods. It means that nobody uses it and it's safe
to remove it.
Removed prepare_empty_partition_squashfs method and
testing of empty squashfs partition.
(From OE-Core rev: 9152960f250cb4df1e559d747fb09005675a0d75)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added vfat and msdos to the list of supported fstypes in
'wic help kickstart' output.
[YOCTO #11137]
(From OE-Core rev: ab7f2a77e124d8859002619e7ba3117e8a165df7)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Explicitly set system id 0x6(FAT16) for msdos partitions.
Removed old code that attempts to achieve the same result
using 'parted ... lba off'.
(From OE-Core rev: 230452faf151e277bfb2b49526923f8097755b35)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used '-F 16' parameter for mkdosfs to create FAT16 partitions for
'msdos' partition type.
[YOCTO #11137]
(From OE-Core rev: b6243a03ced9a719a5801afcee014b03313cc43c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added prepare_empty_partition_msdos and prepare_rootfs_msdos
methods to support 'msdos' filesystem type.
Created aliases prepare_empty_partition_vfat and prepare_rootfs_vfat
to continue supporting creation of vfat patitiions.
(From OE-Core rev: f06c507078da72f616f45effe5005cc01615a17c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed wic code that loops through hard-coded list of known fstypes
to find prepare_rootfs_<fstype> or prepare_empty_partition_<fstype>
methods and silently skipping unknown fstypes.
(From OE-Core rev: ebb8fb5f81f473156c9aa4bf1965e538492a851b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Restricted possible values of --fstype to the list of
supported types. This should catch incorrect values
when .wks file is being parsed.
Removed checks for empty fstype and mentioning of
unsupported fstype 'ontrackdm6aux3'.
(From OE-Core rev: 21af89a6d44ccea6aef975ffd2483a8fad1231de)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed unused APIs 'outs' and 'quiet'.
Removed 'catch' parameter from runner.runtool API as wic
uses only one value of it. Removed the code that handles
unused values of 'catch' parameter.
[YOCTO #10618]
(From OE-Core rev: 1e45a4f72b16c7ab64f46907d2d2ee9cd749dc23)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced runner.show call to exec_cmd call in bootimg-pcbios
plugin. Removed runner.show API as it's not used anywhere else.
[YOCTO #10618]
(From OE-Core rev: 9749336c37249af99c92478c3e4dc8821cb9a816)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If bootloader artifacts are not found in default bootimg_dir
use wic-tools sysroot for the same purpose. This should
prevent wic from failing if bootloader artifacts can't be
found in image native sysroot.
(From OE-Core rev: 9674bbd0585fc25ccd362f233b83d07ff8f6ff53)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed fsimage plugin and prepare_rootfs_from_fs_image API as
they duplicate functionality of rawcopy plugin. Fsimage plugin makes
wic to remove the image artifact from deployment directory, which
can cause problems too.
[YOCTO #10618]
(From OE-Core rev: 9a470752f5698f791f8f78e28d163a0b9c695186)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
FIEMAP API was added to Linux kernel 2.6.28 back in 2008
SEEK_HOLE and SEEK_DATA API was added much letter.
As FIEMAP is used by filemap module as a default API it's
safe to remove FileMpSeek class as it's never used.
[YOCTO #10618]
(From OE-Core rev: 44e9406ea6e3263d2fb95e9d534a21f74f318480)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you are using relative paths and change to other folder for
execution it will fail, so use realpaths always.
[YOCTO #11164]
(From OE-Core rev: 14283700f8ec9dcb29cbc00c92d76173f1601bf5)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some layers don't have dependencies so add a validation to avoid
exception when trying to None.split().
(From OE-Core rev: 39103285029a0bb7b64dc5a305c484988b4c651a)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, SRCREV is set to AUTOREV, causing mismatch between PV and the kernel
version shown in the makefile (see below to see the bitbake log). The solution
is to skip this check, suggesting to remove it once SRCREV is locked.
ERROR: linux-yocto-4.10+gitAUTOINC+01f18cba44_53be19cad6-r0.1 do_kernel_version_sanity_check: Package Version (4.10+gitAUTOINC+01f18cba44_53be19cad6) does not match of kernel being built (4.10.5). Please update the PV variable to match the kernel source or set KERNEL_VERSION_SANITY_SKIP="1" in your recipe.
ERROR: linux-yocto-4.10+gitAUTOINC+01f18cba44_53be19cad6-r0.1 do_kernel_version_sanity_check: Function failed: do_kernel_version_sanity_check (log file is located at /home/lsandov1/poky2/build/tmp/work/myqemu-poky-linux/linux-yocto/4.10+gitAUTOINC+01f18cba44_53be19cad6-r0.1/temp/log.do_kernel_version_sanity_check.26904)
ERROR: Logfile of failure stored in: /home/lsandov1/poky2/build/tmp/work/myqemu-poky-linux/linux-yocto/4.10+gitAUTOINC+01f18cba44_53be19cad6-r0.1/temp/log.do_kernel_version_sanity_check.26904
ERROR: Task (/home/lsandov1/poky2/meta/recipes-kernel/linux/linux-yocto_4.10.bb:do_kernel_version_sanity_check) failed with exit code '1
[YOCTO #11064]
(From meta-yocto rev: 79bfd911f826c6c7e26827bb200dd69e6f567b17)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When devtool writes to the kconfig fragment, it writes the output of
the diff command returned from pipe.communicate(). This function
returns binary objects. We should open the kconfig fragment file in
binary mode if we expect to write binary objects to it.
[YOCTO #11171]
(From OE-Core rev: 72bec63ab0e78753fb6ed1794d11beef9485c014)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partition UUID for msdos partitioning is based on a 4 bytes long
system identifier. Wic uses random number to generate system
identifier. For the numbers starting with 0 partition uuid is
shorter, which makes wic images non-bootable as kernel expects
8 charactest in PARTUUID parameter.
Padded system identifier with '0' when generating partition UUID
to make it always 8 characters long. This should fix the boot
issue.
(From OE-Core rev: bdaba95af2b2c9174311374436f184d2a927f6f1)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New set of templates that target the 4.10 kernel version.
[YOCTO #11174]
(From meta-yocto rev: 8a11b0cc2a1bfaab25200c251b301c812141ba58)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed test failure caused by using bootimg_dir path
instead of kernel_dir to find systemd-efi bootloader:
FAIL: test_systemd_bootdisk (oeqa.selftest.wic.Wic)
...
FileNotFoundError: [Errno 2] No such file or directory:
'tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/recipe-sysroot/usr/share'
(From OE-Core rev: 552bd782d9ffe275b8fc7d7cb0b9aaceb51888c3)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used wic-tools STAGING_DATADIR if syslinux can't be found
in default bootimg_dir.
(From OE-Core rev: 79a935cfc86ffce6f4b4f328b90337de36ba6dbb)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed do_install_disk and do_configure_partition methods from
bootimage-partition, fsimage and rawcopy plugins as they're empy
and not used.
[YOCTO #10618]
(From OE-Core rev: d58c8ef2836418056f776a9586e0bb0d33afb788)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sparse_copy creates output file that is smaller than input
file when input file ends with unmapped blocks.
Used truncate(<input file size>) when output file is created
to ensure the size of output file will always be equal to
the size of input file.
(From OE-Core rev: 567186f995302a095a771baede4ff5034d1d1862)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bootimg_dir is usually set to the value of STAGING_DATADIR and
kernel_dir - to the value of DEPLOY_DIR_IMAGE, so usage of
kernel_dir is more logical in bootimg-efi, bootimg-partition and
rawcopy plugins.
Replaced usage of bootimg_dir to kernel_dir in 3 above mentioned
plugins that use DEPLOY_DIR_IMAGE as a default artifact location.
(From OE-Core rev: 48a5d67d7cafdeac821e6f35bea380521ef017d5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changing bootimg_dir in plugins is a dangerous hack as this
value comes from wic command line and can be used by multiple
plugins.
(From OE-Core rev: 2457ea5338f7309316b474562b4723e8cb09286d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If some layer depends on other tries to find layer dependency, if the
layer dependency isn't found avoid to test the layer and notice the
user.
(From OE-Core rev: 1e7cf9bb71521f1632dd2e6b01fe7fcc95732983)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes there is a need to only analyze the layer specified by the
command line, the new option -n will disable autodiscovery of layers
and only will try to test specified layers.
(From OE-Core rev: f2f6f0c938226802163698ef14a8a9103da362a0)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The layers isn't required to have a dirctory name start with meta-
so remove the validation.
(From OE-Core rev: 576c6486f547b1d7422cdd12f688aef74ee632ae)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The meta-world-pkgdata recipe can be modified when a layer is added
may be can add recipes to world target, so exclude by default.
[YOCTO #11162]
(From OE-Core rev: cde30d70b04eb66bff66a351ddf733022e98ddab)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is a good idea to let the script to choose what stream wants
to dump the logging output.
[YOCTO #11160]
(From OE-Core rev: 60c9b06f4085f6bddb6aa397a38bfc2ceb10f964)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch avoids the creation of a corrupt EXT file system.
Since there are no checks if a EXT file system was successfully created,
this should add to prevent possible system failures.
(From OE-Core rev: 95ac3d0637cad7e12f246b8bd64ab64348df0483)
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the tinfoil2 refactoring, if an error occurred during parsing, we
were showing a traceback and not correctly exiting (since we weren't
calling shutdown()). Fix both of these issues.
(From OE-Core rev: 18304036e1b513fd12c049dbf549ba75c503ed84)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't need the gap that the extended partition occupies if we
already know that we have less than five partitions. Saves up to one
full alignment of space.
(From OE-Core rev: 485315dc170e29962a8848db38db73abafd0586e)
Signed-off-by: Kristian Amlie <kristian.amlie@mender.io>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Web applications built using e.g. angular2, usually requires that the
packages in devDependencies are available.
Thus, add an option '--fetch-dev' to both devtool add and recipetool, to
add npm packages in devDependencies to DEPENDS.
(From OE-Core rev: f246f820d53b459596fde6758a09f7a0d7db7c4c)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When "bitbake -k -S none world" failed, the error printed by
yocto-compat-layer.py contained the stack trace multiple times and did not
contain the stderr output from bitbake, making the error hard to understand
and debug:
INFO: ======================================================================
INFO: ERROR: test_signatures (common.CommonCompatLayer)
INFO: ----------------------------------------------------------------------
INFO: Traceback (most recent call last):
File "/fast/work/poky/scripts/lib/compatlayer/__init__.py", line 144, in get_signatures
stderr=subprocess.PIPE)
File "/usr/lib/python3.4/subprocess.py", line 620, in check_output
raise CalledProcessError(retcode, process.args, output=output)
subprocess.CalledProcessError: Command 'bitbake -k -S none world' returned non-zero exit status 1
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/fast/work/poky/scripts/lib/compatlayer/cases/common.py", line 51, in test_signatures
curr_sigs = get_signatures(self.td['builddir'], failsafe=True)
File "/fast/work/poky/scripts/lib/compatlayer/__init__.py", line 149, in get_signatures
raise RuntimeError(msg)
RuntimeError: Traceback (most recent call last):
File "/fast/work/poky/scripts/lib/compatlayer/__init__.py", line 144, in get_signatures
stderr=subprocess.PIPE)
File "/usr/lib/python3.4/subprocess.py", line 620, in check_output
raise CalledProcessError(retcode, process.args, output=output)
subprocess.CalledProcessError: Command 'bitbake -k -S none world' returned non-zero exit status 1
Loading cache...done.
Loaded 1328 entries from dependency cache.
NOTE: Resolving any missing task queue dependencies
NOTE: Runtime target 'zlib-qat' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['zlib-qat']
...
Summary: There were 5 ERROR messages shown, returning a non-zero exit code.
The yocto-compat-layer.log was incomplete, it only had the first part
without the command output.
stderr was missing due to stderr=subprocess.PIPE.
Instead of the complicated try/except construct it's better to check
the return code ourselves and raise just a single exception. The
output (both on stderr and in the yocto-compat-layer.log) now is:
INFO: ======================================================================
INFO: ERROR: test_signatures (common.CommonCompatLayer)
INFO: ----------------------------------------------------------------------
INFO: Traceback (most recent call last):
File "/fast/work/poky/scripts/lib/compatlayer/cases/common.py", line 51, in test_signatures
curr_sigs = get_signatures(self.td['builddir'], failsafe=True)
File "/fast/work/poky/scripts/lib/compatlayer/__init__.py", line 147, in get_signatures
raise RuntimeError(msg)
RuntimeError: Generating signatures failed. This might be due to some parse error and/or general layer incompatibilities.
Command: bitbake -k -S none world
Output:
Loading cache...done.
Loaded 1328 entries from dependency cache.
NOTE: Resolving any missing task queue dependencies
ERROR: Nothing PROVIDES 'qat16' (but /fast/work/meta-intel/common/recipes-extended/openssl-qat/openssl-qat_0.4.9-009.bb DEPENDS on or otherwise requires it)
ERROR: qat16 was skipped: incompatible with machine qemux86 (not in COMPATIBLE_MACHINE)
...
Missing or unbuildable dependency chain was: ['openssl-qat-dev']
...
Summary: There were 5 ERROR messages shown, returning a non-zero exit code.
(From OE-Core rev: 5b9ac62ab535d2791b9713857e1016f49f53dd8d)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we are both having a bootloader and a U-Boot environment file, we
can end up with two entries using "--source rawcopy" and "--no-table",
and since they reuse the same file [1], their cleanup handlers will
try to delete the same file twice. So make sure we only do it once.
[1] Although they reuse the same file, the resulting output is
correct, so it appears the file is accessed in properly sequential
order.
(From OE-Core rev: f1a3eac376c4600cdb128d870ad9b7e9d51ed9c0)
Signed-off-by: Kristian Amlie <kristian.amlie@mender.io>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patches removes the empty space in front of the copied file which
was skipped. Without this reduction it's not possible to place a
partition with rawcopy and skip parameter on a desired alignment.
(From OE-Core rev: 5c024d71f9413b81ee1707dbc41f0721f8f27bdb)
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without the int() function this variable will be a string. This will led
to a error in Filemap on line 545 due wrong types.
> [...]
> File
> ".../poky/scripts/lib/wic/filemap.py", line 545, in sparse_copy
> if start < skip < end:
> TypeError: unorderable types: int() < str()
(From OE-Core rev: 46b5814bcdc0e7e3cb293e877e2aa949baf5fef8)
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The yocto-compat-layer script serves as a tool to validate the alignament
of a layer with YP Compatible Layers Programme [1], is based on an RFC
sent to the ML to enable automatic testing of layers [2] that wants to
be YP Compatible.
The tool takes an layer (or set of layers) via command line option -l
and detects what kind of layer is distro, machine or software and then
executes a set of tests against the layer in order to validate the
compatibility.
The tests currently implemented are:
common.test_readme: Test if a README file exists in the layer and isn't
empty.
common.test_parse: Test for execute bitbake -p without errors.
common.test_show_environment: Test for execute bitbake -e without errors.
common.test_signatures: Test executed in BSP and DISTRO layers to review
doesn't comes with recipes that changes the signatures.
bsp.test_bsp_defines_machines: Test if a BSP layers has machines
configurations.
bsp.test_bsp_no_set_machine: Test the BSP layer to doesn't set
machine at adding layer.
distro.test_distro_defines_distros: Test if a DISTRO layers has distro
configurations.
distro.test_distro_no_set_distro: Test the DISTRO layer to doesn't set
distro at adding layer.
Example of usage:
$ source oe-init-build-env
$ yocto-compat-layer.py LAYER_DIR
[YOCTO #10596]
[1] https://www.yoctoproject.org/webform/yocto-project-compatible-registration
[2] https://lists.yoctoproject.org/pipermail/yocto-ab/2016-October/001801.html
(From OE-Core rev: e14596ac33329bc61fe38a6582fa91f76ff5b147)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rewrite Public Domain as PD, as that's what the place holder in
meta/files/common_licenses is called.
(From OE-Core rev: d7f0af5aa90a9ef7714c842fb4cb762017820768)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Handle npm packages with multiple licenses (AND and OR).
Prior to this, AND and OR were treated as licensed in their
own.
(From OE-Core rev: c0cfd9b1d54b05ad048f444d6fe248aa0500159e)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rewrite the 'SEE LICENSE IN EULA' to a single string (without
spaces), to avoid splitting the string later on.
(Otherwise, each word gets split, and assumed to be a license
on it's own.
(From OE-Core rev: 39127702cee80c972ee9a447ef4006751f47475e)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Quite a few npm packages declare MIT/X11 as their license. This is equal to
a pure MIT license.
(From OE-Core rev: 8df5e731a10cc9ade1266e9daaa26ec7c855c062)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added 3 new targets to directdisk-bootloader-config.cfg to
match hddimg syslinux config.
This is a preparation for dropping hddimg in favor of wic.
[YOCTO #11044]
(From OE-Core rev: 95bf0af5293a7f5868abd85f4fc15f5c542bfd09)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Installed vesamenu.c32 and its dependencies to support
vesamenu ui in syslinux config.
(From OE-Core rev: 6d7e57ca7e77f3164e4d24470bb1e3ee91a07a89)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced forgotten calls of logger.error with raising
WicError exception. Otherwise errors will be ignored.
(From OE-Core rev: 7a5156092699593903a4bedb4cb23cc6e42ea62e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Defined variable 'out' to fix this exception:
UnboundLocalError: local variable 'out' referenced before assignment
(From OE-Core rev: d994340ec32ec04226ec185a8998775602c8b8bf)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added search paths to the debug message to make it
easier to see where the native command is searched.
[YOCTO #11017]
(From OE-Core rev: 3e78aa91aa07510a75ec2eecdd2dd00b1c583c26)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently there is no way to specify a dependency on native
tools for wic without modifying wic-tools recipe. Obvious
way to make it more flexible is to use image sysroot and
wic-tools together to find an executable.
Modified run_native_cmd to use image and wic-tools sysroots
to find native executable.
[YOCTO #11017]
(From OE-Core rev: 06f976cb7c593ab14ee221365d9afbaf9de94a91)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made PluginMeta to populate global PLUGINS dictionary that
is accessed by PluginMgr. This should make the code more
understandable as PluginMgr don't need to get data directly
from PlugnMeta attribute.
(From OE-Core rev: 68df14eb43103537279824c5f627cc5914b5282c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As PluginMgr class contains only one method it's
better to move it to pluginbase to have all plugin
related APIs in one module.
(From OE-Core rev: 244585b369ecc0019002ca51bf7f8fd506234462)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Store results of PluginMgr.get_plugins to avoid
loading plugins more than once.
This should speed up finding plugins.
(From OE-Core rev: 95ba37b394d01a6ed81f32ffa03813a070d682dc)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Call methods directly instead of getting them with
get_plugin_methods and then calling.
(From OE-Core rev: efcd07fe17bf55441059b00a5becc3952e0a4075)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Throw WicError if do_create method of imager plugin is
not implemented.
(From OE-Core rev: 87031c933047a37ddc26be3d04ea17b6e60ea10a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used more readable syntax to specify metaclass for
the base plugin classes.
(From OE-Core rev: 808451f154867caef73e00af04f56f051b7d5f6b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed all private methods and complicated logic.
Put all code to get plugins into get_plugins method.
(From OE-Core rev: 9b8c69cdc8500ce065dbe607ba07ee95c1016659)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Simplified the implementation of get_plugin_methods:
- get rid of looping over the dicrtionary, used access by key instead
- get rid of filling a dictionary that passed as a parameter
(From OE-Core rev: 875d4eede61b548d64f426c2ef077cc17e50cd45)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used get_plugins('source') instead of get_source_plugins to
unify and simplify API to get plugins.
(From OE-Core rev: aaab003e472416124d7342fc8c4a17c252b83f4d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of making a singleton object of PluginMgr class
it's simpler to use PluginMgr class directly as any class
is a singleton.
(From OE-Core rev: cbe7dbd31f2292416d8e801e142679c69d9a44bc)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed unused exceptions from error.py
Moved definition of WicError to lib/wic/__init__.py
(From OE-Core rev: 15442d072bb6d93bd9b941726f93262503053da5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no need to raise special exceptions. Raising
WicError should be enough.
(From OE-Core rev: b952076cc9f458c3d5eb03e12dc3ec316a44804c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced sys.exit with raising WicError in wic plugins.
(From OE-Core rev: 92e8c81c941597eb2b4b61d5c28833e4826888f8)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced sys.exit with raising WicError in the core wic modules.
(From OE-Core rev: 1b11437fb25ece5b3eede52344b071e875fa738f)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved from lib/wic/utils/ to lib/wic as this is a core module.
(From OE-Core rev: 808c70b81de5c3cfc3dcb01f08213e2ea33b7252)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced msger with wic logger in the direct plugin.
(From OE-Core rev: adeacb4e600b8438bd9db7e83a5cb4a118d186f3)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced msger with wic logger in the core wic modules.
(From OE-Core rev: cdd6675951b74075c9b9159f7465a88f83775bac)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After running sdk-install we need to ensure that the standalone sysroots are
updated as done when the eSDK is originally built. Add such a call so this
happens automatically and the envrionment scripts in the SDK work correctly
after updates.
(From OE-Core rev: 4f422071d6f9a074986f399d9e648977bd2e0a68)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enable using, e.g. host port 2222 for connection to qemu target.
Defaults to 22 for standard ssh/scp port.
[YOCTO #11079]
(From OE-Core rev: a2bfa2cc9ee19f617f7d3b6447896e45eb855d2e)
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
upgrade.py imports oe.recipeutils in meta/lib/ but path to oe.recipeutils
is not provided. This fails populate_sdk_ext.
(From OE-Core rev: 5f140359f859fea9cfe8c8d9c9584bceec875adb)
Signed-off-by: Luck Hoang <huyht1205@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved creation of PartitionedImage object from DirectPlugin.create
method to init. It makes the code a bit more readable and logical.
(From OE-Core rev: 9f225ef5620f2e47e762b2fd16fa5f8d6f1f60fd)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved the code that generates real partition numbers from DirectPlugin
to PartitionedImage.
The idea is to have all code that works with partitions
in PartitionedImage class.
(From OE-Core rev: dbd58b0b32288821d9dd5d1a3118cf7c6e8f098a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved code that calls prepare method of Partition objects
from DirectPlugin to PartitionedImage.prepare.
The idea is to have all code that works with partitions
in PartitionedImage class.
(From OE-Core rev: 700aa424f0aa239cf4149eed4bfb1dc7d9677431)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved setting of bootloader source from do_create method
to __init__ as it doesn't have anything to do with image
creation.
(From OE-Core rev: 361b890da1c7b24de0a62516545e4c164830081d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved code that generates partition UUIDs from DirectPlugin to
PartitionedImage class as it's more logical to have it there.
This allows the code to be reused by other imager plugins.
Got rid of having yet another list of partitions in PartitionedImage.
Reused the list passed from DirectPlugin.
(From OE-Core rev: 20c70dd617d4abfff507e210610a58a9989f7c9b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced call of _get_part_num method with an attribute.
This eliminates the need to call the method and loop over
partitions every time we need to know realnum for partition.
(From OE-Core rev: 96a26b6ddf22346dafa06b00816579439e98445f)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed catching CreatorError and raising it again.
(From OE-Core rev: c17353c8ec9ecb52368e08dad999aafc9ac1b734)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't transform ImagerError exception into warning.
Let wic to catch it on the upper level.
(From OE-Core rev: 0cc84c81dd4a776aa37c8d1bcdcc3fa3af78d1e4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed java-like setter set_bootimg_dir. It's more pythonic
to access public attributes directly.
(From OE-Core rev: c2a6ca4883ea59e6492ad3b4aa0e9bc358b87fed)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set default value of --ondisk to 'sda' to ensure
we always have disk name for the partition.
This is a first step of replacing --ondisk with
disk <name> attribute of .wks. This is better as
all partitions share the same disk.
(From OE-Core rev: caa243a86ba50c676f8eb0a71440885a49f10cc4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This file and utils/oe folder are not needed anymore as
all modules were removed or moved out of this directory.
(From OE-Core rev: e3b73b1c07620cde423cc7db7e2f7d8b1ad25e25)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As PartitionedImage is only used in direct.py it makes sense
to move it there. It's easier to maintain (and refactor) it
this way.
(From OE-Core rev: 2550622371f5c50857e5d58eabab01a1823c6fc3)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disk operations were spread over DirectPlugin, DiskImage and Image
code making the code hard to understand.
Renamed Image class to PartitionedImage.
Removed DiskImage class.
Moved disk operations to PartitionedImage.
There was an implicit support for multiple disks: if different devices
were specified in .wks file (e.g. --ondisk sda and --ondisk sdb), wic
would theoretically generate multiple images. This is quite confusing
option and the code supporting it was broken for a long time. The same
effect (multiple output images) can be achieved in obvious and clear
way - by using multiple .wks files.
This functionality was removed. PartitionedImage works only with
one image. This makes the code less complex and easier to maintain.
(From OE-Core rev: 4dc9dbfc7fbc16d349a019e8973d50905cd28244)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It will omit the given path from the resulting partition, and if the
given path ends in a slash, it will only delete the content, and keep
the directory.
Since mkfs only accepts whole directories as input, we need to copy
the rootfs directory to the workdir so that we can selectively delete
files from it.
Since we want to use the copyhardlinktree() function, we need to put
the generic oe lib in the module search path.
(From OE-Core rev: 6602392db3d391d926dead49fcc54326015cfe35)
Signed-off-by: Kristian Amlie <kristian.amlie@mender.io>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no need to pass scripts_path from main wic module
down the stack as it's not used there.
Removed scripts_path argument from DirectPlugin class
and wic_create function.
(From OE-Core rev: f9f72c506befdff13260f37ded0beaea3aa30fad)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partition attributes were copied to the dictionary in partitionedfs
code, which makes the code hard to follow.
Used partition object passed from direct.py module as is in
partitionedfs.
(From OE-Core rev: 97db24d34847a641868f9ee83aae56f9dd5e0a8a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced _get_parts getter with direct attribute
access to self.parts
Removed code that implicitly created partition
if there are no partitions mentioned in .wks file
(From OE-Core rev: 7ece57a80f4002d0d83dc322092e9178380ab509)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Renamed private methods with leading double underscores:
__create_partition -> _create_partition
__add_disk -> _add_disk
There is no point to have those names mangled, one underscore
is enough.
(From OE-Core rev: 26f3218070d34ccd4e81fa3b8e1a15c03583d070)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
3 lines long private method __add_partition is called only
from add_partition method. Merged them together to increase
readability.
(From OE-Core rev: b7fb20fffada61211dda6d41f99407618428f23c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Private method __format_disks is called only from create
method making the code less readable. Merged the code
into one method.
(From OE-Core rev: b76b1bd404487df38fd99bc0d0e6a59acb10c9d3)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that the datastore works dynamically we don't need the update_data calls
so we can just remove them. They're not actually done anything at all for
a while.
(From OE-Core rev: 8de0c5d3bd01919e2bf0394f9c485936d6098cec)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the move to tinfoil2, the behaviour when parsing failed has changed
a bit - exceptions are now raised, so handle these appropriately.
Specifically when if parsing the recipe created when running devtool add
fails, rename it to .bb.parsefailed so that the user can run bitbake
afterwards without parsing being interrupted.
(From OE-Core rev: b9592bd3c1ab2155b9f62d18ce593b9c88eff279)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Numbers within SCM (e.g. git) URLs are extremely unlikely to be valid
version numbers - more likely they are just part of the name, thus don't
try to extract them and use them as the version - doing so causes pretty
bad behaviour within devtool:
--------- snip ---------
$ devtool add https://github.com/inhedron/libtr50
NOTE: Fetching git://github.com/inhedron/libtr50;protocol=https...
...
NOTE: Using default source tree path .../build/workspace/sources/libtr
...
RecursionError: maximum recursion depth exceeded while calling a Python object
--------- snip ---------
(This was because ${PV} was being substituted into the URL, but PV's
value was being set to include ${SRCPV}, so there was a circular
reference.)
(From OE-Core rev: 3427508b6ce865654f8bf01a6fc04b83c70315d3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
npm's package.json supports two types of dependencies -
optionalDependencies and dependencies; in the code for creating a recipe
from a non-npm source (e.g. a git repository) we were not handling
optionalDependencies and thus when pointed at a node.js application
outside of npm we weren't taking care of all dependencies.
(From OE-Core rev: 2b66cb9982d10ce1744d430858eaef3e5a72c8c0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As syslinux module has been recently removed and
serial_consloe_form_kargs became local API in rootfs_pcbios_ext plugin
it should be called without syslinux. prefix.
(From OE-Core rev: d701673b658d879726d6cf846a6d5f4173c3b0e5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic-tools recipe specific sysroot contains syslinux as wic-tools
depends on it. Used wic-tools target to get syslinux path should
guarantee that syslinux is installed there and can be used.
(From OE-Core rev: be8ebac3b055070f690d42836bb0fdad32d29204)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic code is hard to follow due to deep and twiggy class
inheritance tree.
Flatten imager tree:
wic -> wic_create -> Creator -> DirectPlugin -> DirectImageCreator
to
wic -> wic_create -> DirectPlugin
by
removing Creator class and creator module
merging DirectImageCreator into DirectPlugin
Changed APIs to use the same parameters names.
Passed parsed command line options as an object down the stack.
(From OE-Core rev: 1e28d512341ce470c7afb256a01e597ab87170ca)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was a typo in current code: mktemp was used instead of
mkdtemp to create work directory. This is fixed by using
mkdtemp.
Create work directory as a subdirectory of output directory
to make sure both are on the same partition to make moving
of result image faster.
This also fixes possible disk space issues as mkdtemp uses
TMPDIR, TEMP or TMP environment variables to get default value
of its 'dir' parameter. Those variables are usually pointing
to /tmp, which is not the best location to create huge images.
(From OE-Core rev: e6579b4e007ce89000c46c09917fbd3c72f18a73)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make sure output directory exists before creating an image.
Create it if it doesn't exist.
(From OE-Core rev: e52bfb0e81d3fb2a474f08b2e2b8b89aadc61d14)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This module contains singe function serial_console_form_kargs, which
is used only by rootfs_pcbios_ext plugin. Moved it there and removed
syslinux module to make it easy to find and mainain plugin code.
[YOCTO #10619]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The code deals with non-existing directory
and can be removed.
[YOCTO #10619]
(From OE-Core rev: e148884b8145fad212c4085f2ead5c3e5e3e42a2)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This API is not used in wic code.
[YOCTO #10619]
(From OE-Core rev: 9d14cb8bb8cf9559b7ff0efa03427624c18e2506)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced parse_sourceparams function with list comprehension.
Used local variables instead of attributes.
Moved global variable to the local scope.
[YOCTO #10619]
(From OE-Core rev: 4adbac84046ff744f1452b5ff4d017d17d2d45e2)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This file is not used anywhere in the wic code.
[YOCTO #10619]
(From OE-Core rev: e3c43ce3261663225aeba50b8c6229577574f9b7)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As this files is located in plugins/imager subdirectory it's
obvious that it's an imager plugin. Renamed to direct.py to
be consistent with plugin naming scheme.
[YOCTO #10619]
(From OE-Core rev: d5db8c2ee91bdd51bfbb2ebf61aea8ff0378d512)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed wrong continued indentation, unused import and
trailing new line pyling warnings.
[YOCTO #10619]
(From OE-Core rev: e78762a4b52c31357ef29a5b93c53db7190fa4f2)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Synchronized attribure names in DirectImageCreator and
DirectPlugin for better readability. Simplified code,
removed unneeded global variable disk_methods.
(From OE-Core rev: b87b9ef84791615636424a224f74386a4aa0c2fa)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced class method __rootfs_dir_to_dict with a list
comprehension.
[YOCTO #10619]
(From OE-Core rev: 266fd31410771db4c06539f7368c196a6d03000a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This move simplifies directory structure and makes
further refactoring easier. The code from direct.py was used
only in direct_plugin, so it's safe to move it there.
[YOCTO #10619]
(From OE-Core rev: a8f5ebb26183faa9af6eb72f4dabfcf83aa1e8d4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed as they're not used anymore in wic code.
(From OE-Core rev: ffa2f3d7bf883d5add911b7c5d0be2b347733524)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a preparation to removing conf.py and config/wic.conf
from the codebase.
Got rid of using configmgr global object in direct_plugin and direct
modules. It was used to implicitly parse kickstart file and set
couple of variables.
Replaced usage of configmgr by passing parameters directly to the
DirectImageCreator.
[YOCTO #10619]
(From OE-Core rev: 79191119de010acb107f9392a991108728858441)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a preparation to removing conf.py and config/wic.conf
from the codebase.
confmgr object is complicated for no reason and almost
useless as all configuration info comes from command line and
bitbake variables. It's used it creator.py to store information
about output directory, logs and some never used functionality
like tmpfs for future use, which doesn't actually happen.
[YOCTO #10619]
(From OE-Core rev: 702ee7a1fe30d87d55ba9528ae89abff4e294fd9)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Renamed variable hdd_dir to deploy_dir as this variable is
assigned to the value of DEPLOY_DIR_IMAGE.
(From OE-Core rev: fc84893c319f3e8c72f13c58f25e0b54095c3a49)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
isoimage-sihybrid plugin uses MACHINE_ARCH to get the name of initrd image.
It doesn't work for all machines, for example for quemux86-64 machine
MACHINE_ARCH is quemux86_64 and initrd name is
core-image-minimal-initramfs-qemux86-64.cpio.gz
Used TRANSLATED_TARGET_ARCH variable to get the initrd image name.
Replaced MACHINE_ARCH->TRANSLATED_TARGET_ARCH in WICVARS variable to
make it available from <image>.env file.
(From OE-Core rev: edf0830412de66eada9ef3f3947ca42e301c5377)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than have each image type look for artifacts in image-specific
locations, move towards having them look for artifacts in a common
location, in this case DEPLOY_DIR_IMAGE
Use the existing deploy.bbclass to have the bootloaders put their binaries
in DEPLOY_DIR_IMAGE and then wic will find them and place them in the image
(From OE-Core rev: 1c8acea91e775b1b6f8b25e774aaba3e790fc59b)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stop using HDDDIR in isoimage-isohybrid wic plugin.
This variable is set by hddimg code, which is going to be
removed soon.
All required artifacts should be available from ISODIR.
wic-image.bbclass has been modified to build iso artifacts,
so it should be safe to remove usage of HDDDIR.
[YOCTO #10835]
(From OE-Core rev: 4ceb0df10db7254b290784cabc5279ffa2b946a4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
INITRD variable is not set if hddimg is disabled.
isoimage-isohybrid can't get correct name for initrd if INITRD
variable is not set.
Added INITRD_LIVE to WICVARS and used it in isoimage-isohybrid
code to get initrd artifact name. Used INITRD if INITRD_LIVE is not set.
(From OE-Core rev: c672753be60550b15d5d593c251b61776d5b104d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set proper gpt partition name for the partitions in case given
in the configuration
(From OE-Core rev: bc6e6a34f35bd081d828160bab8ee12e770c7e1e)
Signed-off-by: Jukka Laitinen <jukka.laitinen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Attributes with two leading underscores are mangled in Python
and used mainly for avoiding name clashes with names from
subclasses. They're not needed in most of wic classes.
(From OE-Core rev: 2f92c0490f1acf5a6926fc6654ce3b6588ddcc24)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wic used hardcoded path /var/tmp/wic/ as a work directory,
which caused conflicts if two wic instances run in parallel.
Made work directory unique and temporary. Moved results from
work directory to output directory when they're ready.
[YOCTO #10783]
(From OE-Core rev: 5d948f04823dedfa26a879aa6a5dc23de2bb9354)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Simplified DirectImageCreator code by removing inheritance
from BaseImageCreator. This inheritance doesn't make much sense
as DirectImageCreator is the only class that was inherited from
BaseImageCreator.
(From OE-Core rev: 4e9952514211ef4b9a3731ce915090385f335a31)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used wic-tools target to get location of syslinux.
(From OE-Core rev: 5afd7def3b101bb3d650db4d005cb8d36aaf074a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This parameter will be used to allow or prevent variable caching.
For example, we don't want to cache value of RECIPE_SYSROOT_NATIVE
wic-tools variable as we may decide to rebuild wic-tools.
(From OE-Core rev: e4269fdb4c3ef06b97df063f8586f74986215c83)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed isoimage-isohybrid plulgin and correspondent wic tet case:
- used wic-tools target when getting varlue of STAGING_LIBDIR variable
- ensured that image is built with efi and hddimg enabled
(From OE-Core rev: 5878484da64c38c7fde45bb06d76e22e608eb022)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Renamed grub-efi-native -> grub-efi in NATIVE_RECIPES
dictionary as '-native' suffix is added to the recipe name in
the code.
(From OE-Core rev: cd0e7b20de2de67793d0454f4e5cf6bb6f4a16f7)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic used native sysroot to get path to pseudo utility.
This approach doesn't work with recipe specific sysroots.
Using FAKEROOTCMD should fix the issue.
(From OE-Core rev: 03e051d594f285ea3c014d45e9b30028e683c602)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When extracting source for a recipe within devtool (for extract, modify
or upgrade) We need to redirect WORKDIR, STAMPS_DIR etc. under a
temporary directory so that:
(a) we pick up all files that get unpacked to the WORKDIR, and
(b) we don't disturb the existing build
However, with recipe-specific sysroots the sysroots for the recipe will
be prepared under WORKDIR, and if we used the system temporary directory
i.e. usually /tmp) as used by mkdtemp by default, then our attempts to
hardlink files into the recipe-specific sysroots will fail on systems
where /tmp is a different filesystem, and we'd have to fall back to
copying the files which is a waste of time. Put the temp directory under
the WORKDIR to prevent that from being a problem.
(From OE-Core rev: e10a973cd9390eacb13bdb99693a0622bd3695f5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
[RP: Add needed mkdirhier call]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 8c1c43b790 `wic: Create a logical partition
only when it is really mandatory` did not account for partitions that are not
present in partition table.
(From OE-Core rev: 57b05e924bba7b2fff07a34690474c0fa3046865)
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Current code doesn't always show error output of the
external command and even ignores non-zero exit code.
Moved checking of exit code value to the lowest level
possible: to _exec_cmd. This should make wic to always
check exit code of the external command and issue
an error if it's not 0.
[YOCTO #10816]
(From OE-Core rev: 7f68001579c08509332d633b27b5c2ea9386b6c9)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
part.rootfs_dir was used as an image name in the code.
However, when multi-rootfs feature is used this attribute
points to the name of the rootfs, e.g. if --rootfs command line
is rootfs1=core-image-minimal partf.rootfs_dir is 'rootfs1'.
The code also fails when image name is not provided in wic
commandline. For example, when wic is called with
--rootfs-dir=<path> part.rootfs_dir will contain path and
wic will crash trying to call bitbake -e <path> to get
value of ROOTFS_SIZE variable.
Fixed the code by getting image name properly and checking
if it's not a path.
[YOCTO #10815]
(From OE-Core rev: 2e05d9709f1308fc95d3406b8a409ea982c5b474)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This file has been moved to meta-yocto-bsp/wic/
(From OE-Core rev: efa7639b31c51e2874ba61fd68f9e2cb51145eaf)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The purpouse of this function was to check dependencies for building a
hybrid iso and build them using bitbake if not found. Calling bitbake in
this context means this wic plugin itself cannot be instrumented inside
bitbake recipes which is undesirable, the benefits of this are clear:
there is no need to maintain outside scripts to generate an iso using wic
and the isohybrid building logic can be further abstracted away into an
isohybrid.bbclass in the future which can be easily inherited or something
similar.
So remove the function and add all dependencies to NATIVE_RECIPES so that
wic can print useful errors when they're not built.
To automate building the isohybrid image dependencies, add the following
somewhere in your image build inheritence hierarcy (or maybe create a
bbclass in the future to do these sort of things automatically):
DEPENDS += "syslinux syslinux-native cdrtools-native e2fsprogs-native \
parted-native dosfstools-native mtools-native grub-efi-native"
(From OE-Core rev: ba4346069ab87f1cf942d1928f911eca6a9d65cd)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Current parsing code can wrongly interpret arbitrary lines
that are of 'key=value' format as legitimate bitbake variables.
Implemented more strict parsing of key=value pairs using
regular expressions.
(From OE-Core rev: f0ec387ad40fb9c098ac8d761993bc2bacc76e65)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the gummiboot project is no longer being maintained
and we are using systemd-boot as a replacement instead,
we can now clean up all remaining gummiboot files.
[YOCTO #10332]
(From OE-Core rev: 65eb3f51b70baaf24de871301a7247d5baed00ed)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After systemd-boot was introduced, its been tested for a while with no major
issues being found until now, this patch completely replaces all gummiboot
instances with systemd-boot ones, taking the next step into cleaning
up systemd-boot/gummiboot.
[YOCTO #10332]
(From OE-Core rev: f9a61d3400ad9068a6d83b8eb6aefe3098c58e68)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There were a few straggling expansion parameter removals left for
getVar/getVarFlag where the odd whitespace meant they were missed
on previous passes. There were also some plain broken ussages such
as:
d.getVar('ALTERNATIVE_TARGET', old_name, True)
path = d.getVar('PATH', d, True)
d.getVar('IMAGE_ROOTFS', 'True')
which I've corrected (they happend to work by luck).
(From OE-Core rev: 688f7a64917a5ce5cbe12f8e5da4d47e265d240f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added kickstart file to produce partitioned image for
MPC8315 reference hardware.
[YOCTO #8719]
(From OE-Core rev: 8c873b4fd92b72adfc49d20bbfab4779857fb6c9)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added new option --fixed-size to wks. The option can be used to indicate
the exact size of a partition. The option cannot be added together with
--size, in which case an error will be raised. Other options that
influence automatic partition size (--extra-space, --overhead-factor),
if specifiec along with --fixed-size, will raise an error.
If it partition data is larger than the amount of space specified with
--fixed-size option wic will raise an error.
(From OE-Core rev: fdd217ba874bd480e0180830fe2e6bd54dde19d9)
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using devtool modify on the kernel, we have to do a bit of a dance
with tinfoil instances because we only find out that we're working on a
kernel recipe after tinfoil is initialised, but then we need to build
kern-tools-native which we're doing just by running bitbake directly.
With the tinfoil2 changes, a datastore for the recipe that we were
keeping around across the opening and closing of tinfoil is no longer
able to be used. Re-parse the recipe to avoid this problem.
(In future this whole thing will be able to be done in the same tinfoil
instance thanks to tinfoil2, but that refactoring is yet to be done.)
(From OE-Core rev: 06127d0115ba449bf04e2579cd1010065e0ed6e3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently wic looks for wks files in
<layer dir>/scripts/lib/wic/canned-wks/ directories.
This path is too nested and doesn't look consistent with the
naming scheme of layer directories.
Added <layer>/wic directory to the list of paths
to look for wks files.
(From OE-Core rev: 803b5fa798cf7580c7c10401eb04a1cccf51b8ab)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When no --size is specified for the rootfs in the .wks, we want to obey the
rootfs size from the metadata, otherwise the defined IMAGE_ROOTFS_EXTRA_SPACE
and IMAGE_OVERHEAD_FACTOR will not be obeyed. In some cases, this can result
in image construction failure, if the size determined by du was insufficient
to hold the files without the aforementioned extra space.
This fallback from --size to ROOTFS_SIZE was already implemented when
--rootfs-dir is specified in the .wks, but it did not occur otherwise, neither
when --rootfs-dir= was passed to `wic create` nor when IMAGE_ROOTFS was used.
This made a certain amount of sense, as this fallback logic happened at such
a level that it wasn't able to identify which partitions were rootfs
partitions otherwise. Rather than doing it at that level, we can do it in
prepare_rootfs(), which is run by the rootfs source plugins.
Note that IMAGE_OVERHEAD_FACTOR and a --overhead-factor in the .wks will now
both be applied when --size isn't specified in the .wks. A warning is added
about this, though a user won't see it unless wic fails or they examine the
do_image_wic log.
Fixes [YOCTO #10815]
(From OE-Core rev: 1d50e11286722c4114c1ae0bc285f846cd85fc4c)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
getVarFlag() now defaults to expanding by default, thus remove the
True option from getVarFlag() calls with a regex search and
replace.
Search made with the following regex:
getVarFlag ?\(( ?[^,()]*, ?[^,()]*), True\)
(From OE-Core rev: 3e4806063fe11092b2307f113a6c0b0f04104091)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
(From OE-Core rev: 0a36bd96e6b29fd99a296efc358ca3e9fb5af735)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using the setVariable commands here followed by buildFile will result in
"basehash mismatch" errors, and that's expected since we are deviating
*at runtime* from what was previously seen by changing these variable
values. Set BB_HASH_IGNORE_MISMATCH to turn off the errors.
(From OE-Core rev: b0169796f294bbec0397b7eae86454a46b68cdc5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Extracting the source for a recipe (as used by devtool's extract, modify
and upgrade subcommands) requires us to run do_fetch, do_unpack,
do_patch and any tasks that the recipe has inserted inbetween, and do so
with a modified datastore primarily so that we can redirect WORKDIR and
STAMPS_DIR in order to have the files written out to a place of our
choosing and avoid stamping the tasks as having executed in a real build
context respectively. However, this all gets much more difficult when in
memres mode since we can't call internal functions such as
bb.build.exec_func() directly - instead we need to execute the tasks on
the server. To do this we use the buildFile command which already exists
for the purpose of supporting bitbake -b, and setVariable commands to
set up the appropriate datastore.
(I did look at passing the modified datastore to the buildFile command
instead of using setVar() on the main datastore, however its use of
databuilder makes that very difficult, and we'd also need a different
method of getting the changes in the datastore over to the worker as
well.)
(From OE-Core rev: eb63b5339014fc72ba4829714e0a96a98e135ee2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If PATCHTOOL is "git", and PATCH_COMMIT_FUNCTIONS is set to "1", for
additional tasks between do_unpack and do_patch, make a git commit. This
logic was previously implemented in devtool itself, but it makes more
sense for it to be implemented in the patch class since that's where the
rest of the logic is for this (or in lib/oe/patch.py). It also makes
it possible for this to work with tinfoil2.
(From OE-Core rev: f24f59ea1d8bc335ea8576f6a346d0935f4a3548)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use Tinfoil.parse_recipe_file() and Tinfoil.parse_recipe() instead of
the recipeutils equivalents, and replace any local duplicate
implementations. This not only tidies up the code but also allows these
calls to work in memres mode.
(From OE-Core rev: f13b56266ee96dfab65a3a7db50e8051aa9f071a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
setup_tinfoil() already calls prepare(), we don't need to call it again
ourselves and doing so with tinfoil2 results in "ERROR: Only one copy of
bitbake should be run against a build directory". Calling prepare()
twice should probably still be allowed, so that ought to be fixed
separately, but in the mean time this code is still wrong so fix it
here.
(From OE-Core rev: 38b8a7d4aff096ea0a62f2ddf3fe2de1df591bf5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To allow devtool plugins in one layer to shadow another in a well
defined way, first search BBPATH/lib/devtool directories and then
scripts/lib/devool and load only the first found.
The previous search and load loop would load all found plugins with the
ones found later replacing any found before.
(From OE-Core rev: 1b2b8a0a80de17ea053002fdd124055d2798029a)
Signed-off-by: Ola x Nilsson <ola.x.nilsson@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't worth bother with logical partition on MBR partition type (aka
msdos) if disk image generated by wic should have 4 partitions.
(From OE-Core rev: 36a558fbdc96094626e7de1a3510691e30885368)
Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yet another instance of us expecting a string back from subprocess when
in Python 3 what you get back is bytes. Just decode the output within
run_command() so we avoid this everywhere.
(From OE-Core rev: 103faae78cdff5280c7b7cdb7ca01e0868d02ec9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In previous implementation, a UnicodeDecodeError exception will be
raised if multi-byte encoded characters are printed by the subprocess.
As an example, the following command will fail in an en_US.UTF-8
environment because wget quotes its saving destination with '‘'(0xE2
0x80 0x98), while just the first byte is provided for decoding:
devtool add recipe http://example.com/source.tar.xz
The patch fixes the issue by avoiding such kind of incomplete decoding.
(From OE-Core rev: 1875ea92546d23abcab1b40b562477a0016f712d)
Signed-off-by: Jiajie Hu <jiajie.hu@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The hello-mod recipe is unusual in that it has only local files in
SRC_URI and builds these out of ${WORKDIR}. When you use devtool modify
on it, devtool puts all of those files in an "oe-local-files"
subdirectory of the source tree, which is not ${S} (or ${B}) any more
and thus building the recipe afterwards fails. It's a bit of a hack, but
symlink the files in oe-local-files into the source tree (and commit the
symlinks with an ignored commit so that the repo is clean) to work
around the problem. We only do this at time of extraction, so any files
added to or removed from oe-local-files after that won't be handled, but
I think there's a limit to how far we should go to support these kinds
of recipes - ultimately they are anomalies.
I initially tried a hacky workaround where I set effectively set B =
"${WORKDIR}" and that allowed it to build, but other things such as the
LIC_FILES_CHKSUM checks still broke because they expected to find files
in ${S}. Another hack where I set the sourcetree to point to the
oe-local-files subdirectory works for hello-mod but not for makedevs
since whilst that is similar, unlike hello-mod it does in fact have
files in the source tree (since it has a patch that adds COPYING) and
thus the same issue occurred.
Also tweak one of the tests that tries devtool modify / update-recipe on
the makedevs recipe to try building it since that would have caught this
issue.
Fixes [YOCTO #10616].
(From OE-Core rev: 857c06d6a1d161bf5a01311d07758bd4241929a3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The .deb import feature did not import postinst, postrm, preinst, or
prerm functions. This change checks to see if those files exist, and
if so, adds the appropriate functions.
[ YOCTO #10421 ]
(From OE-Core rev: ebb73aa6ad920bfd6a23f8c20105d6bcf07dd3d5)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you have a patch remotely fetched in a recipe (e.g. from an http
server) that needs updating then add a local version and substitute the
entry in SRC_URI to point to it.
One can argue about how desirable it is to be modifying patches fetched
in this way, but then one can argue about how desirable it is to have
such patches in the recipe in the first place - and in any case if
devtool update-recipe is to correctly transfer changes to such patches
made in the git repository within the source tree to the recipe then
there isn't much choice but to do it this way.
(From OE-Core rev: a19c26cc78a181f9dd2706dd42e7e450d7ad4082)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is possible to use gzip or bzip2 to compress patches and still refer
to them in compressed form in the SRC_URI value within a recipe. If you
run "devtool modify" on such a recipe, make changes to the commit for
the patch and then run devtool update-recipe, we need to correctly
associate the commit back to the compressed patch file and re-compress
the patch, neither of which we were doing previously.
Additionally, add an oe-selftest test to ensure this doesn't regress in
future.
Fixes [YOCTO #8278].
(From OE-Core rev: e47d21624dfec6f71742b837e91da553f18a28c5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As of the move to Python 3 and the fixes we applied at that time,
bb.process.run() will return a byte array of length 0 rather than an
empty string if the output is empty. That may be a bug that we should
fix, but for now it's easiest to just check the result here before
treating it as a string. This fixes running "devtool update-recipe" or
"devtool finish" on a recipe which has no source tree, for example
initramfs-framework.
Fixes [YOCTO #10563].
(From OE-Core rev: 66bf6978fc807ecc422fb6b6328f68bc3406cf15)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
xf86-input-libinput is RRECOMMENDed by xserver-xorg, these
legacy drivers are not needed.
(From meta-yocto rev: 715f72d7842b4a789a78e7889b2f01cd41f02df8)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix typos in documentation of Image.add_partition() and
Image.__format_disks().
(From OE-Core rev: f5bf7bf253224912c66bab89f48ff63a73e0d698)
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We explicitly check for --fstype if no source was provided for a
partition. However, this was not the case for rootfs partitions. Make
sure to raise an error if filesystem was left unspecified when preparing
a rootfs partition image.
(From OE-Core rev: b8c35fcad57810a87aa25ebeb533adf286eed565)
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It seems that prepare_empty_partition_ext() and
prepare_empty_partition_btrfs() got broken in commit
c8669749e3, thus one could observe the
following backtrace:
Backtrace:
File "<snip>/poky/scripts/lib/wic/plugins/imager/direct_plugin.py", line 93, in do_create
creator.create()
File "<snip>/poky/scripts/lib/wic/imager/baseimager.py", line 159, in create
self._create()
File "<snip>/poky/scripts/lib/wic/imager/direct.py", line 290, in _create
self.bootimg_dir, self.kernel_dir, self.native_sysroot)
File "<snip>/poky/scripts/lib/wic/partition.py", line 146, in prepare
method(rootfs, oe_builddir, native_sysroot)
File "<snip>/poky/scripts/lib/wic/partition.py", line 325, in prepare_empty_partition_ext
os.ftruncate(sparse.fileno(), rootfs_size * 1024)
NameError: name 'rootfs_size' is not defined
(From OE-Core rev: 0bf686739a5e8a1193f5be5aa60afbf2ea1e5074)
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The size field of Partition class is expected to be an integer and ought
to be set inside prepare_*() method. Make sure that this is always the
case.
(From OE-Core rev: a37838f995ae642b0b8bdd47a605a264fb3bf200)
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Root device name in systemd-bootdisk.wks is 'sda'. This can cause
images, produced using this wks to refuse booting if real device
name is not 'sda'. For example, when booting MinnowBoard MAX from
MicroSD card the boot process stucks with this message on the boot
console output: Waiting for root device /dev/sda2...
This happens because real device name of MicroSD card on this device
is mmcblk1.
Used --use-uuid option for root partition. This should make
wic to put partiion UUID instead of device name into kernel command
line.
[YOCTO #10485]
(From OE-Core rev: 5b73d5f484cc844affe91ec19d881d42e187f30c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When you run devtool add on a source tree we attempt to figure out the
correct name and version for the recipe. However, despite our best
efforts, sometimes the name and/or version we come up with isn't
correct, and the only way to remedy that up until now was to reset the
recipe, delete the source tree and start again, specifying the name this
time. To avoid this slightly painful procedure, add a "rename"
subcommand that lets you rename the recipe and/or change the version.
(From OE-Core rev: 9303d8055c45a0f6af295d70a6f6a8b9d8d8a7c9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
recipetool sets the LICENSE value based on licenses detected from the
source tree. If there are multiple licenses then they were being
separated by spaces, but this isn't actually legal formatting and if
you're using "devtool add" you get a warning printed when devtool
parses the recipe internally.
Earlier I had made a conscious decision to do it this way since it's up
to the user to figure out whether the multiple licenses should all apply
(in which case they'd be separated with &) or if there is a choice of
license (in which case | is the correct separator). However, I've come
to the conclusion that we can just default to & and then the ugly
warning goes away, and it's the safest alternative of the two (and most
likely to be correct, since it's more common to have a codebase which is
made up of code with different licenses, i.e. all of them apply to the
combined work).
I've tweaked the comment that we add to the recipe to explicitly state
that we've used & and that the user needs to change that if that's not
accurate.
Fixes [YOCTO #10413].
(From OE-Core rev: ecac6aee8cf3313350b58c21012bcd67cfb915e4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you run devtool finish to move a recipe created in the workspace by
devtool add or devtool upgrade to a layer, and that layer is not
currently included in bblayers.conf (perhaps unintentionally), then the
recipe will no longer be visible to bitbake. In this scenario, show a
warning so that the user isn't surprised by the recipe "going missing".
(From OE-Core rev: 4da8a58e2997db4f24ae0cac0ba27259d7857a05)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If devtool finish is run on a recipe where the recipe file itself is in
the workspace (e.g. where devtool add / devtool upgrade has been used)
and the specified destination layer is not in bblayers.conf, then we
need to avoid running bitbake -c clean at the end because the recipe has
been moved, but the bbappend is still present in the workspace layer at
that point and so if we do it will fail due to the dangling bbappend.
It's difficult to do the clean at the point we'd want to because tinfoil
is holding bitbake.lock for most of the time, but in any case cleaning
the recipe is less important than it used to be since we started
managing the sysroot contents more strictly, so just disable cleaning
under these circumstances to avoid the problem.
Fixes [YOCTO #10484].
(From OE-Core rev: c6980307d43632f4172e79d9607004203af4e9c8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When running devtool add, instead of hiding the recipetool create
output, change it so that it's appropriate to show in the devtool
context and show it in real-time. This means that you get status output
such as when a URL is being fetched (though currently no progress
information.) recipetool create now has a hidden --devtool option to
enable this display mode.
(From OE-Core rev: 219aec8803de4ef04c514c87ecfb15359c9424a6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced running of truncate utility with the standard library
call os.ftruncate
(From OE-Core rev: 1ba6101ceaee354816e690d44bc9a5dd8dcf4011)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new runqemu script assumes that if OECORE_NATIVE_SYSROOT is set then
it shouldn't try to run bitbake to find out the values of various
variables such as DEPLOY_DIR_IMAGE; this assumption is incorrect for the
extensible SDK. To work around this, clear OECORE_NATIVE_SYSROOT in the
environment when running runqemu.
Fixes [YOCTO #10447].
(From OE-Core rev: abff69a48bf3076ce8e21356accdc8d85d2c8dbf)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
According to UEFI specification all EFI platforms must support
GUID Partition Table(GPT) disk layout. Here is a list of advantages
of using GPT disk layout over the legacy MBR partitioning:
- Logical Block Addresses (LBAs) are 64 bits (rather than 32 bits).
- Supports many partitions (rather than just four primary partitions).
- Provides both a primary and backup partition table for redundancy.
- Uses version number and size fields for future expansion.
- Uses CRC32 fields for improved data integrity.
- Defines a GUID for uniquely identifying each partition.
- Uses a GUID and attributes to define partition content type.
- Each partition contains a 36 character human readable name.
Used GPT partitioning in all EFI kickstart files.
Tested result images on NUC, MinnowBoard MAX and MinnowBoard Turbot.
(From OE-Core rev: 66d4efeb0face5fc8a1755dcd2ed3a611997a04d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used ttyS0 console.
Removed usage of ttyPCH0 (FRI2 leftover)
Decreased bootloader timeout to 5 seconds
Removed 'vmalloc=256MB snd-hda-intel.enable_msi=0' as it's not
needed for any of reference BSPs.
(From OE-Core rev: ee16a283d695112236906338887c6eba109c9fb5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used ttyS0 console.
Removed usage of ttyPCH0 (FRI2 leftover)
Decreased bootloader timeout to 5 seconds
Removed 'vmalloc=256MB snd-hda-intel.enable_msi=0' as it's not
needed for any of reference BSPs.
(From OE-Core rev: 7b2443364a42c731bc9eefa6bb460262464e26b6)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In modern kernels, ARCH=x86 defaults to 64 bits, so explicitly
unset this word length for qemu i386 architectures.
(From meta-yocto rev: 9750779bc78de3ea33d7f88e4972a5b21c3f811b)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used ttyS0 console.
Removed usage of ttyPCH0 (FRI2 leftover)
Decreased bootloader timeout to 5 seconds
Removed 'vmalloc=256MB snd-hda-intel.enable_msi=0' as it's not needed
for any of reference BSPs.
(From OE-Core rev: b46825a6ce5cecd24fed814bae48f9cfd0b97568)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stopped using GPT partition table in mkefidisk.wks as it's not
supported by all reference hardware.
(From OE-Core rev: 07bb11b097a67ff89ae633fa1992db5494d75c0c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disk identifier created by parted doesn't match the one we generated
and used in bootloader config. We need to rewrite it to make our image
bootable.
Modified involved API and data structures to access previously
generated disk identifiers after MBR is initialized. Written disk
identifiers to MBR.
(From OE-Core rev: 221d3bdd6e0ab8a4d25e2c96bd976cbec4e76681)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added generation of partition UUIDs for MSDOS partitions.
UUID for MSDOS partitions is <disk identifier>-<partition number>,
where disk identifier is a random 4 bytes long number. It's usually
generated when MBR/partition table is initialized.
As UUID is used to point to the root partition in bootloader config
we need to generate it before the MBR is initialized.
After MBR is created we need to rewrite system identifier to match
it with what is used in bootloader config. This will be implemented
in the next commit.
(From OE-Core rev: 6ecc6addf4080eda75a15af077816c81c6bf70a5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sgdisk fails to set PARTUUID for msdos partitions as it's only
supported for GPT partitions.
Checked partition table format to run sgdisk --partition-guid
only for GPT partitions.
(From OE-Core rev: 0c1804821917d6d3a062ca19b63667d030138f21)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With recent changes to recipeutils, the list of local files returned
by get_recipe_local_files could possibly include source files. This
only happens when the recipe contains a SRC_URI using subdir= to put
files in the source tree. These files should be ignored when
populating the list of local files for oe-local-files directory.
[YOCTO #10326]
introduced in
OE-Core revision 9069fef5dad5a873c8a8f720f7bcbc7625556309
(From OE-Core rev: 31f1bbad248c36a8c86dde4ff57ce42efc664082)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All kernel choices today (linux-yocto_4.* and custom) have the same xserver options,
so remove the duplicate lines.
(From meta-yocto rev: c456b5cf172e5ee1fca078383cad189325ea05f5)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Relying on that awk is installed on the target just to extract the
fourth column (i.e., the free volume size) from `df -P` is an
unnecessary dependency for devtool deploy-target. As it is already
using sed to mangle the output from `df -P`, this can easily be
modified to only extract the free volume size.
(From OE-Core rev: 7bab454b0bf0075fbb2a5de06286a9da1df2adc6)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the user runs devtool add on an npm:// URL (or source tree that uses
node.js), and npm is not available, just build nodejs-native instead of
telling the user they need to do it; if that fails because there isn't
any such recipe (which would be the default, since it's not in OE-Core)
then produce a slightly more readable error message hinting at what the
user needs to do.
Note that this forces the use of nodejs-native rather than npm on the
host - this makes sense for two reasons: (1) we need it to be compatible
with nodejs for the target, and (2) we have to have a recipe for that
anyway, so allowing you to avoid having a recipe for the native version
isn't really beneficial.
There's a bit of a hack in here in order to allow this - for node.js
sources that aren't fetched via npm we don't know that they are that
until we've fetched and unpacked them, by which time we're inside
recipetool and have an active tinfoil instance that will prevent bitbake
being run. To avoid this being an issue, we allow recipetool to get to
the point where we know we need npm and then exit with a specific exit
code, at which point devtool can try to build it and then if that
succeeds, it will re-execute recipetool. This is definitely not ideal,
but it can't really be refactored and done properly until we do the
tinfoil2 refactoring; in the mean time though we still want to be
helpful to the user.
Fixes [YOCTO #10337].
(From OE-Core rev: f40662bde5aab158c4e4c3c3ff5e68665a4194a5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We want to remove the -f/--fetch option at some point (as you can now
specify a URL as a positional argument instead) so display a warning
that it's deprecated if it is used.
(From OE-Core rev: 43476d77a91d50454ca26e016a3413b24e9f3aec)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were supposed to be printing out the specified recipe name here but I
forgot to specify a parameter for the string.
(From OE-Core rev: 87f844e533adfc229a5d26857a82cc6b125216c8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a preparation to use mkefidisk as a default wks for
genericx86* BSPs. This change enables usage of partition UUID
instead of device name to specify root partition in kernel
command line. It should make images to boot on devices with
boot device names that differ from what's mentioned in wks file.
(From OE-Core rev: 23cca700870230b46d251086441136e99659ef12)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rename wks for systemd-boot per the suggestion from community.
Also amend description to distinguish it from others when
running "wic list images".
(From OE-Core rev: 6303dbbaa08214a37caf38e3b6b5a30a108bd3b7)
Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This function was broken by the multi-config changes, and isn't needed anymore
now that recipeutils.pn_to_recipe can handle provides. Without this, the
newappend sub-command fails.
(From OE-Core rev: 4a5028dc3d1ab2f97465e63db5b05de73daebdfa)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Preserving images for every partition doubles disk space
consumed by an image build. As those images are not used,
so it's better to remove them after assembling final image.
(From OE-Core rev: 51171b4aa10f2218c5e27d785ca7bf4f3949a4b4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added serial console to kernel command line to to make it
easier to boot wic images on devices without display.
Tested on MinnowBoard MAX.
(From OE-Core rev: 9a774e3bcd5dc4c85d642acc7bf26095b8c620e4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that recipeutils.validate_pn() properly validates characters used in
the name, we can drop this bit checking for '/' since that's not
permitted by validate_pn(). (The FIXME comment here - that I myself
apparently wrote - is questionable since that function was clearly never
intended to allow '/', perhaps I was misled because it was broken and
did so).
(From OE-Core rev: e010d9be3709cf3c607ffc03c3188abe4e1e9eb4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In keeping with making recipetool create / devtool add as easy to use as
possible, users shouldn't have to know how to reformat git short form ssh
URLs for consumption by BitBake's fetcher (for example
user@git.example.com:repo.git should be expressed as
git://user@git.example.com/repo.git;protocol=ssh ) - instead we should
just take care of that automatically. Add some logic in the appropriate
places to do that.
(From OE-Core rev: 78c672a72f49c4b6cfd8c247efcc676b0ba1681a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Filter out a plain "Licensed under the XXXX license" statement, as seen
in the capnproto project (and no doubt others).
(From OE-Core rev: ba4aa319fd49ee02ce2e30c2db0f3988c0e8833c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
AX_PKG_SWIG is not the only commonly-used macro for detecting swig -
there's also AC_PROG_SWIG. As per AX_PKG_SWIG, add swig-native to
DEPENDS if AC_PROG_SWIG is found in configure.ac.
(From OE-Core rev: 847a1aa7153fc8a7b820353283a6f1e51d64f8de)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If python is required then we need to inherit pythonnative (or
python3native) otherwise do_configure will probably fail since it won't
be able to find python.
(From OE-Core rev: 63234cc45aee91b031657971f36997e1443f80ee)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When creating a recipe for an existing local git clone, we attempt to
use the fetcher to determine if it supports the SRCREV variable.
Unfortunately running this code does a network check to get the latest
revision as a direct result of us using '${AUTOREV}' as a default value.
If you don't have a network connection this will of course fail. Rather
than have this block creating the recipe, catch the exception and just
guess from the URL.
Ultimately this should probably be fixed in the fetcher but for now this
will at least resolve the issue on this end.
(From OE-Core rev: f7e43f931d7d6019a3b2509b2b2635978fbbae36)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I ran into an example where recipetool was getting the name/version
completely wrong:
https://bitbucket.org/sortsmill/libunicodenames/downloads/libunicodenames-1.1.0_beta1.tar.xz
>From this it would create a libunicodenames-1.1.0-beta1_1.1.0-beta1.bb
file (likely because it couldn't split the file name and therefore took
all of it, then got the version from one of the files inside the
tarball). When this happens it's just irritating because you then have
to delete the recipe / run devtool reset and then run recipetool create
/ devtool add again and specify the version manually.
This patch is the result of systematically running the
determine_from_filename() function over the files on the Yocto Project
source mirror and my local downloads directory and fixing as many of the
generic issues as reasonably practical - it now gets the name and
version correct much more often. There are still cases where it won't,
but they are now in the minority.
(From OE-Core rev: 7b018b1d493a8d10fd02b8cc220990b191c87fe5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Try to ensure that for Apache, GPL and LGPL where the values extracted
from the "Classifiers" field may not be version-specific, if there is a
versioned license in the free-form license field then use that instead.
Also insert the free-form license field as a comment in the recipe for
the user's reference.
(From OE-Core rev: 237f66042eedd906f654827b53bf9269738267ab)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make use of the extravalues dict to send back other variable values from
the python handling plugin, and enable passing back PV and PN. This not
only places variable values in the final recipe a bit more consistently
with other types of source, it also allows the name and version to be
picked up fron a local source tree and not just when the recipe is
fetched from a remote URL that happens to have those in it.
(From OE-Core rev: 3e7029f28c6ea9bb1d283bcdc3fdfee11455af8e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we output extra blank lines (because of some automated editing) then
it makes the output recipe look a bit untidy. You could argue that we
should simply have the editing code not do that, but sometimes we don't
have enough context there for that to be practical. It's simple enough
to just filter out the extra blank lines when writing the file, so just
do it that way.
(From OE-Core rev: cbebc9a2edf7d7a422ee5c71219e79e3b349de3b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you have your own node.js application you may not publish it (or at
least not immediately) in an npm registry - it might just be in a
repository on github or on your local machine. Add support to recipetool
create for creating recipes to build such applications - extract their
dependencies, fetch them, and add corresponding npm:// URLs to SRC_URI,
and ensure that LICENSE / LIC_FILES_CHKSUM are updated to match. For
example, you can now run:
recipetool create https://github.com/diversario/node-ssdp
(I had to borrow some code from bitbake/lib/bb/fetch2/npm.py to
implement this functionality; this should be refactored out but now
isn't the time to do that refactoring.)
Part of the fix for [YOCTO #9537].
(From OE-Core rev: 4fb8b399c05a1b66986fc76e13525f6c5e0d9b58)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you make adjustments to the source tree (as create_npm.py will be)
then you will need to re-run the license variable handling code at the
end so that we get all of the files that should go into
LIC_FILES_CHKSUM if nothing else. Split out the license variable
handling to a separate function in order to allow this.
(From OE-Core rev: f0d6f4b7e87ea781ac0dffcc8d0310570975811b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For debugging it's useful to be able to tell recipetool to keep the
temporary directory.
(From OE-Core rev: 480a6b745a85b2881e5cc1a0bbb572e3235ca008)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ensure we fetch submodules and set SRC_URI correctly when pointing to a
git repository that contains submodules.
(From OE-Core rev: 65d5cc62d4ecfc78ce4b37b3886a7fe5aa05a75e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When trying to map python module dependencies to the packages that
provide them, if we're looking for .so files that satisfy
dependencies then we need to exclude files found under the .debug
directory, otherwise the dependency will get mapped to the python-dbg
package which isn't correct.
For example, this fixes creating a recipe for pyserial and not getting
python-fcntl in RDEPENDS_${PN}, leading to errors when trying to use the
serial module on the target.
(From OE-Core rev: 46a068ca35975988a8e9c0310f71fdcee55937a4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If AX_PKG_SWIG is found in configure.ac, then what's being looked for is
the swig binary, not swig for the target - so fix the dependency
accordingly.
(From OE-Core rev: 2600cd6f6c63ecf79804e2bc6eb6f198a012d5d6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's rare but there are recipes that have individual files (as opposed
to archives) in SRC_URI using subdir= to put them under the source tree,
the examples in OE-Core being bzip2 and openssl. This broke devtool
update-recipe (and devtool finish) because the file wasn't unpacked into
the oe-local-files directory and thus when it came time to update the
recipe, the file was assumed to have been deleted by the user and thus
the file was erroneously removed. Add logic to handle these properly so
that this doesn't happen.
(We still have another potential problem in that these files become part
of the initial commit from upstream, which could be confusing because
they didn't come from there - but that's a separate issue and not one
that is trivially solved.)
(From OE-Core rev: 9069fef5dad5a873c8a8f720f7bcbc7625556309)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should always shut down tinfoil when we're finished with it, either
by explicitly calling the shutdown() method or by using it as a
context manager ("with ...").
(From OE-Core rev: 5ec6d9ef309b841cdcbf1d14ac678d106d5d888a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using PATCHTOOL = "git", the user of the system is not really the
committer - it's the build system itself. Thus, specify "dummy" values
for username and email instead of using the user's configured values.
Various parts of the devtool code that need to make commits have also
been updated to use the same logic.
This allows PATCHTOOL = "git" and devtool to be used on systems where
git user.name / user.email has not been set (on versions of git where
it doesn't default a value under this circumstance).
If you want to return to the old behaviour where the externally
configured user name / email are used, set the following in your
local.conf:
PATCH_GIT_USER_NAME = ""
PATCH_GIT_USER_EMAIL = ""
Fixes [YOCTO #8703].
(From OE-Core rev: 765a9017eaf77ea3204fb10afb8181629680bd82)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The missing split() causes dev and dbg packages to match.
(From OE-Core rev: bf83e0f0a3d52958c4380599f1afc4b8e058afd7)
Signed-off-by: Ola x Nilsson <ola.x.nilsson@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The --wilcard-version flag was only used in the srcrev variant of the
update-recipe command.
(From OE-Core rev: d3057cba0b01484712fcee3c52373c143608a436)
Signed-off-by: Ola x Nilsson <ola.x.nilsson@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Unfortunately to implenent multiconfig support in bitbake some APIs
had to change. This updates code in OE to match the changes in bitbake.
Its mostly periperhal changes around devtool/recipetool
[Will need a bitbake version requirement bump which I'll make when merging]
(From OE-Core rev: 041212fa37bb83acac5ce4ceb9b7b77ad172c5c3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With some recent changes in the kern tools, we can drop some changes in
the yocto-bsp and yocto-kernel tools that ensured proper patching and
BSP inheritance.
In particular, we no longer need to signify the start of patching, and
we must instruct the tools that we only want configuration fragments
via inheritance .. no patches (since they are already applied).
(From meta-yocto rev: 34ed5eebd0b5baab98b6b2d7b3f06ca40932b37d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The regex here needs to be anchored to the end or it'll match longer
URLs, which was exactly what I was trying to avoid. This regression was
introduced in OE-Core revision 7998dc3597657229507e5c140fceef1e485ac402.
Fixes [YOCTO #10023].
(From OE-Core rev: 9291c5d3c257d5ada7605dfe46ababda08f6d3c1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a comment to the recipe listing license files that were found but
not able to be identified, so that the user can find and examine them
by hand fairly easily.
Fixes [YOCTO #9882].
(From OE-Core rev: 4b7d1bf8172533e9ac91a49ade152a05e2ee4146)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rawcopy plugin copies source files to build folder before using them
to assemble result image. After assembling the image wic renames
source files to <image>.p<partition number>. If the same source file
is used in multiple partitions wic breaks trying to rename file that
doesn't exist.
Added <line number> suffix to the files when copying them to the
build dir. This should make filename unique even if the same source
file is used for multiple partitions.
[YOCTO #9826]
(From OE-Core rev: 43a809bfe99024083b4ab4eb9895b084c9c4fa80)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a subcommand which will "finish" the work on a recipe. This is
effectively the same as update-recipe followed by reset, except that the
destination layer is required and it will do the right thing depending
on the situation - if the recipe file itself is in the workspace (e.g.
as a result of devtool add), the recipe file and any associated files
will be moved to the destination layer; or if the destination layer is
the one containing the original recipe, the recipe will be overwritten;
otherwise a bbappend will be created to apply the changes. In all cases
the layer path can be loosely specified - it could be a layer name, or
a partial path into a recipe. In the case of upgrades, devtool finish
will also take care of deleting the old recipe.
This avoids the user having to figure out the correct actions when
they're done - they just do "devtool finish recipename layername" and
it saves their work and then removes the recipe from the workspace.
Addresses [YOCTO #8594].
(From OE-Core rev: fa550fcb9333d59b28fc0e4aebde888831410f5c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This provides us with the information we need to remove the original
version recipe and associated files when running "devtool finish" after
"devtool upgrade".
(From OE-Core rev: 92eb42c347af919cd9f8739515fdf806c12b5ba8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will be called by "devtool finish" to allow it to update the recipe
or create the bbappend depending on the destination.
(From OE-Core rev: 5067cdc73483b53d46d9bf584723e41957c7ec54)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will be called by "devtool finish" to allow it to reset the recipe
at the end.
(From OE-Core rev: b8d398516556eaf97679e28ad58448f570984b52)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If there are files in the oe-local-files directory which are identical
to the original version, then we shouldn't be copying them to the
destination layer. This is particularly important when using the -a
option to create a bbappend.
(From OE-Core rev: 9230bfcc839eb35630949f0a8ed058ca1fa944b1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
devtool update-recipe was defaulting to the ${BPN} named directory when
adding patches next to a recipe, but that meant if you already had files
in a ${BP} named directory (i.e. name and version) or "files" then you'd
end up with two directories next to the recipe, which is usually not
what you want. To avoid this, look through FILESPATH and take the first
one that's the same level or one level down from the recipe and already
exists, if any.
(From OE-Core rev: c7a8190cf8bdf86ba850b6780b8e951e90232c06)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
According to wic documentation partition mount point is an optional
argument. Skipping mount point also makes sense in certain
configurations when one needs to specify a partition that is not mounted
by the running system, such as a recovery or a mirror partition (in dual
rootfs setups).
(From OE-Core rev: 5e063a4c6bb0e0623a4d25bb2bf6eecd9ad6b9f1)
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This wks is just a copy of gummiboot wks with bootloader
changed to systemd-boot. A very basic boot test on a X86
target is done with a direct-boot image generated by:
wic create mksystemd-bootdisk -e core-image-minimal
Because we plan to replace gummiboot with systemd-boot at any
time in the future, we summarize history (as much as I can) of
the current gummiboot wks before it's gone:
-----------------------------------------------------------------
commit 7d4bb40905
Author: Ed Bartosh <ed.bartosh@linux.intel.com>
Date: Wed Sep 2 13:58:02 2015 +0300
wic: get rid of scripts/lib/image
Moved content of scripts/lib/image/ to scripts/lib/wic as
one directory with the same name as a tool is self-explanatory
and less confusing than two.
(From OE-Core rev: 5dc02d572794298b3362378cea3d7da654456c44)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
commit 77561e7191
Author: Ed Bartosh <ed.bartosh@linux.intel.com>
Date: Wed Sep 2 13:58:01 2015 +0300
wic: use ext4 in canned .wks files
Latest kernel doesn't have ext3 compiled in. Wic images produced
from canned .wks can't boot because of that. Switching to ext4
fixes this issue.
(From OE-Core rev: d281a65a81f369fc8d75023b8f911ce4106969c1)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
commit 072657ce98
Author: Tom Zanussi <tom.zanussi@linux.intel.com>
Date: Mon Aug 11 20:35:41 2014 -0500
wic: Add mkgummidisk kickstart file
This is the same as mkefidisk but uses gummiboot instead of grub-efi.
(From OE-Core rev: 5979409ebfab0bb07b3c2b2fcf14a722c441f07b)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-----------------------------------------------------------------
(From OE-Core rev: 546cd8352b8adce074831ec31cfa3bb2bf2f0084)
Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new systemd-boot enabled in OE is the old gummiboot
merged into systemd project. Our intention is to replace
gummiboot with systemd-boot in OE once every feature based
on gummiboot is supported with systemd-boot.
Before we can purge gummiboot, we temporarily keep both of
the two bootloaders supported.
Patch doesn't do replacement for every "gummi" occurrence.
We think cleaning can be done in background after we disable
people to use gummiboot, so we just keep change small and
safe this time.
(From OE-Core rev: daa5f8b886408eb6a17898b18ac97d5a0d76d2cc)
Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is currently possible to specify a file (e.g. a tarball) on the local
disk as the source, but you have to know to put file:// in front of it.
There's really no need to force users to jump through that hoop if they
really want to do this so check if the specified source is a file and
prefix it with file:// if that's the case.
Also ensure the same works for "devtool add" at the same time.
(From OE-Core rev: 71350003790c38e84b0e525a71a2fe5d24e3d083)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For a while now, Github hasn't been advertising a specific repository
URL since cloning the web URL with git works. Armed with this knowledge
and fully expecting people to just paste the github URL, we need to
handle this situation specially. If it looks like a github URL to the
root of a repository then treat it as a git repository instead of a
normal https URL to be fetched by the wget fetcher.
(From OE-Core rev: 7998dc3597657229507e5c140fceef1e485ac402)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Certain recipes cannot be used with devtool extract / modify / upgrade -
usually because they don't provide any source. Return a specific exit
code (4) so that scripts such as scripts/contrib/devtool-stress.py know
the difference between this and a genuine failure.
(From OE-Core rev: ffd295fed4ab81fc0bd00bb145ef4d72c49584bf)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were attempting to open the recipe file unconditionally here - we
need to account for the possibility that the recipe file has been
deleted or moved away by the user.
(From OE-Core rev: 47822a2aff56fd338c16b5ad756feda9f395a8a1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In OE-Core revision 7baf57ad896112cf2258b3e2c2a1f8b756fb39bc I changed
the default update-recipe behaviour to only update patches for commits
that were changed; unfortunately I failed to handle the --initial-rev
option which was broken after that point. Rework how the initial
revision is passed in so that it now operates correctly.
(From OE-Core rev: b2ca2523cc9e51a4759b4420b07b0b67b3f5ac43)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Code cleanup, no functional changes - this code was never used.
(From OE-Core rev: 397b76c7f26e38e761b94b1f7987aafd55048e10)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We're opening source files with the default encoding (utf-8) but we
can't necessarily be sure that they are UTF-8 clean - for example,
recipetool create ftp://mama.indstate.edu/linux/tree/tree-1.7.0.tgz
prior to this patch resulted in a UnicodeDecodeError. Use the
"surrogateescape" mode to avoid this.
Fixes [YOCTO #9822].
(From OE-Core rev: 50fcd9d1b9a20d49bc873467a82a071f2f2f8b5a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the changes to migrate from optparse to argparse there was a syntax change that needs an update in the help. This is basically just the change of 'properties' and 'property' from positional arguments to options. This patch makes the required changes.
[YOCTO #8321]
(From meta-yocto rev: b171379b5ca54d55ea763421794a651e71bbda91)
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Optparse is deprecated and should be avoided. The arparse library is better suited and has more tools to handling the parsing of arguments. This patch makes necessary changes to migrate to the better library and uses arparse subcommand feature to improve organization of this script.
[YOCTO #8321]
(From meta-yocto rev: 3f45993b96d4d960da0efe8672dc323c9db091a2)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Format of properties file is expected to be a simple json detailing properties, if this format fails an exception is thrown. This patch adds a graceful error message to the case when the properties file has a wrong format.
[YOCTO #9750]
(From meta-yocto rev: 7e543aa19d0d4b2112e6316783fb31b76df3493e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Python3 requires strings to be encoded as bytes before sending them through a subprocess pipe. The help.py file is not considering this and fails when issuing paged help commands. This patch adds this encoding to solve the problem.
[YOCTO #9868]
(From meta-yocto rev: 35b487a47f0cbb99fdee2ec9cc8b56b814c8860e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
GNU make looks for "makefile" and "GNUmakefile" in addition to
"Makefile", so add these other names to the heuristic for detecting a
make-based project.
(From OE-Core rev: 204d19b02265e5b2241888e4c92c0a730f3d3472)
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow specifying more than one recipe on the devtool reset command line.
Also tweak the help text slightly.
(From OE-Core rev: ad92ed8e4f7f48a3d212962531d596b36f6b284f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit ab75075e79 broke the string formatting
for multiple arguments. Since parentheses were removed the formatting considers
only first argument instead of all of them. Fixed parentheses on the formatting.
[YOCTO #9723]
(From meta-yocto rev: d6d641d5b4bb0c8b9acd5cd1341a4a3214bff086)
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Have to convert implicit relative imports to explicit imports since
implicit relative imports are not supported on python3.
[YOCTO #9723]
(From meta-yocto rev: 89cecc603d229768428f3cb68d21235dee80efda)
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
According to https://docs.python.org/3/whatsnew/3.0.html python3
renamed 'raw_input' to 'input'. Making the appropiate changes for
this.
[YOCTO #9723]
(From meta-yocto rev: 76efeeeac7fb30b44ee7057b3b3d1fd84329dae1)
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
stdeout and stderr content returned by subprocess API has different
types in Python 3(bytes) and Python 2(string). Decoding it to
'utf-8' makes it unicode on both pythons.
(From meta-yocto rev: 1de9d0b4ad289c56907d082748cdc0111988cb4f)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used items() as iteritems() doesn't exist in python 3.
(From meta-yocto rev: 0fd2e739cd14c6a02b6f4610176a0ad29b2ecc0e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used exec() builtin instead of 'exec' statement as
this statement doesn't exist in python 3.
(From meta-yocto rev: ceb6c6fac212c5e1e76bf58b793dc2b9420b4a66)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implicit relative imports within packages are not supported in
python 3. They have to be converted to explicit imports.
Used 'from .module import' syntax for relative imports.
(From meta-yocto rev: 8eb2befc544e29fd87ac1fc75886cc6d7f40ad90)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used metaclass=<metaclass> syntax instead old
__metaclass__ = <metaclass> as only new one is supported
in python 3.
(From meta-yocto rev: 70ba79981d904b4b67440c0b5755b5449cddb025)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Renamed raw_input to input as raw_input does not
exist in python 3.
(From meta-yocto rev: c9df9f2699885f2ba5b031c8761aefbf3c796067)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since mtools has been patched to live with filesystems with sizes
not divisible by sectors-per-track, we no longer need to try to
set the size based on our guess of the sectors-per-track dosfstools is
going to use.
(From OE-Core rev: 334e32af88b310ff1ed950d127a6dedeb460f8d0)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Converted return value of items() keys() and values() to
lists when dictionary is modified in the loop and when
the result is added to the list.
(From OE-Core rev: 874a269eb1d70060c2f3b3f8b70800e2aea789f4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used urllib.parse instead of urlparse to make code
working in python 3.
(From OE-Core rev: 0a064f2216895db0181ee033a785328e704ddc0b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved call of decode('utf-8') as close as possible to
call of subprocess API to avoid calling it in a lot of
other places.
Decoded binary data to utf-8 where appropriate to fix devtool
and recipetool tests in python 3 environment.
(From OE-Core rev: 30d02e2aa2d42fdf76271234b2dc9f37bc46b250)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Python 3 doesn't have basestring type as all string
are unicode strings.
(From OE-Core rev: e8cfab060f4ff3c4c16387871354d407910e87aa)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Encoded help text before sending it to pager.communicate as
it expects binary.
[YOCTO #9412]
(From OE-Core rev: 23c27d9d936efaa17da00525f1d2e2f98c53abc7)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
xrange() no longer exists in python 3, use range()
(From OE-Core rev: d022b4335100612d6596cc4c4956cb98ed5873cc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Iterators now return views, not lists in python3. Where we need
lists, handle this explicitly.
(From OE-Core rev: caebd862bac7eed725e0f0321bf50793671b5312)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python3 standardises its use of iteration operations. Update
the code to match the for python3 requires.
(From OE-Core rev: 2476bdcbef591e951d11d57d53f1315848758571)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used print function instead of print statement to make
the code work in python 3.
(From meta-yocto rev: d6eea5a794dd8802b773a9186479a863847e6e55)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If fetching source from a git repository, typically within OpenEmbedded
we encourage setting SRCREV to a fixed revision, so change to do that by
default and add a -a/--autorev option to use "${AUTOREV}" instead.
(From OE-Core rev: 000480c42797dd2f03ebc3bc6d1dabfc6a7b75f5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we use ${BP} for the subdirectory, the default value of S will work
rather than having to have an ugly value derived from the package
file name in both places. This does mean that we have to assume the
default though (we can't just let the normal logic work because the
value of BP is the default until later on, so the replacement doesn't
work).
(From OE-Core rev: 13bc2438d61c345a8f229b9d83bf36a14d08916f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Extract the metadata from package files and use it to set variable
values in the recipe (including recipe name and version, LICENSE,
SUMMARY, DESCRIPTION, SECTION and HOMEPAGE). For LICENSE we take care
not to step on any value determined by our license file scan; if there
is one we simply add a comment above the LICENSE setting so the user can
resolve it.
(From OE-Core rev: 19e6b661d38c5ae9b19d6340762c289830baba59)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow plugins to set any variable value through the extravalues dict,
and use this to support extracting SUMMARY and HOMEPAGE values from spec
files included with the source; additionally translate "License:" to a
comment next to the LICENSE field (we have our own logic for setting
LICENSE, but it will often be useful to see what the spec file says if
one is present).
Also use the same mechanism for setting the same variables for node.js
modules; this was already supported but wasn't inserting the settings in
the appropriate place in the file which this will now do.
(From OE-Core rev: 91fc35ff5e89aa6d4c4ad945e45406fb4f71018e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We want the system to boot on its own, rather than the user having to manually
input the correct file at the EFI prompt.
[YOCTO #9556]
(From OE-Core rev: aa215c12d729c001ad3b8b98a7e203a9ad192211)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The -S / --srcrev option must be specified if fetching from a git
repository, so spell that out in the help text.
(From OE-Core rev: 1465f205c235a1688a85844ebf5259e8971038ae)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make a couple of changes to the rebase operation:
1) Only wrap the actual rebase command in try...except since a failure
in any of the other commands should be an error, not a warning
2) If it's a conflict (which unfortunately we can only tell by checking
for the keyword "conflict" since git doesn't return error codes based
on the type of error) then print a message clarifying that the user
needs to resolve the issue themselves to finish the upgrade.
(From OE-Core rev: 2a76be958432a35a0de30e9a5433089a54a06cad)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gdb recipe in OE-Core has an inc file with the version in it;
since the inc file is pulled in with a "require ${PV}.inc", when
upgrading the recipe we need to also rename the inc file it will fail to
parse and the upgrade itself will fail.
Fixes [YOCTO #9574].
(From OE-Core rev: 3c623aac9333d20a62475279c72b6b6ec3d7dd6b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having two code paths here makes maintenance difficult, and it doesn't
seem likely that you would use the local case in real usage anyway, so
drop the local support entirely.
This should allow us to resolve [YOCTO #9301].
(From OE-Core rev: 7a4c9c96fee4fb514c2b69b52e811c4f896a16f1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the path contains 'scripts' more than once the first occurrence will be
incorrectly used. Use rfind instead of find to find the last occurrence.
(From OE-Core rev: f30c486c17060d2f21618612804a692512ad6a57)
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Included description of -m/--bmap option to the help page
produced by 'wic help create'.
[YOCTO #9413]
(From OE-Core rev: 7c749d4cfe1642d70a6b3643422ef69dec1775fe)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This option enables generation of <image>.bmap file for the
result image using native bmaptool.
[YOCTO #9413]
(From OE-Core rev: d64c7b37c40b052510419b4d6629b83319c833e4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added bmaptool -> bmap-tools pair to the dictionary
executable -> recipe as bmaptool is going to be used by wic
to generate .bmap file.
[YOCTO #9413]
(From OE-Core rev: 4684ac5f4d823a6afedc57aad0aa417bb17ba950)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Generators in Python 3 don't have .next method. It's recommended
to use 'next' builtin instead. As it also present in Python >= 2.6
it should make wic code compatible with both Python 2 and Python 3.
[YOCTO #9412]
(From OE-Core rev: 9b7ab632e47d786dd979262015dbfb1254103f83)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed check for unicode type as it doesn't work in Python 3.
This check is not needed for wic as all its output seem to be
strings. This allows to run code under both pythons.
[YOCTO #9412]
(From OE-Core rev: a56924b4a0102e401b5e37d857a08bab15da974e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
stdeout and stderr content returned by communicate API has different
types in Python 3(bytes) and Python 2(string). Decoding it to 'utf-8'
makes it unicode on both pythons.
Decoded stdout and stderr output to utf-8 to make the code
working under both Python 2 and Python 3.
(From OE-Core rev: 5b556f58a171e3d45107bb56a1f780e5c1abba37)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Division operator works differently in Python 3. It results in
float unlike in Python 2, where it results in int.
Explicitly used "floor division" operator instead of 'division'
operator. This should make the code to result in integer under
both pythons.
[YOCTO #9412]
(From OE-Core rev: 997ff239bd753a7957cc14c6829b2f093d9bcef6)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As bitbake is not ported to Python 3 yet it's better to
avoid using its APIs as much as possible to be able to
test wic under Python 3 at least partially.
Used distutils.spawn.find_executable API in favor of
bb.utils.which to get path of the command to run.
(From OE-Core rev: 9658956bf8a5da779e06f71941de9b3e89415cdc)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This suffix is not supported by Python 3. Wic code works
without it on Python 2 too, so it's safe to remove it.
[YOCTO #9412]
(From OE-Core rev: 296db7e33bd71585cac63dc78c2c95bc619b4a86)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wic plugin machinery implemented using metaclasses.
Reimplemented plugin machinery using this advice from
https://wiki.python.org/moin/PortingToPy3k/BilingualQuickRef
Syntax for creating instances with different metaclasses is very
different between Python 2 and 3. Use the ability to call type instances
as a way to portably create such instances.
Now it should work under both Python 2 and Python 3.
[YOCTO #9412]
(From OE-Core rev: e62fe5a41bdcdd72b9b257fecff7ccdc59c76d33)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed 'raw', 'ask', 'choice' and 'pause' functions from
msger.py as they're not used in wic code and some of them
use raw_input, which is not present in Python 3.
[YOCTO #9412]
(From OE-Core rev: eb87d591ef67f1953b2689430ef6c5a6a27a5b6e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New syntax 'except Exception as err' is supported by Python >= 2.7.
Old syntax 'except Exception, err' is not supported by Python 3.
Used new syntax to be able to run wic on Python 3.
[YOCTO #9412]
(From OE-Core rev: 15e88714d6b0a93f72e8a19b083fcc1f2006e128)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
'with' statement is not used in baseimager.py
It's supported by Python 2.7, which is included into all target
distros. Other wic modules use this statement.
Removed useless 'from __future__ import with_statement' from
wic code.
(From OE-Core rev: 528a1f20939589949831efbb4de6336776efe7d5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All classes in Python3 are new style classes and don't need
to be inherited from object. Wic code works fine without
this inheritance even with Python2, so it's harmless to
remove it.
[YOCTO #9412]
(From OE-Core rev: a146b03ee7d0aa5bc1722da5977a5952782b69bf)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced calls of dict.keys and dict.has_key methods with the
'key in dict' statement. 'key in dict' is more pythonic, faster
and readable. dict.has_key doesn't exist in Python 3.
[YOCTO #9412]
(From OE-Core rev: 003df7dfb932c551953fbf1bd769b3c31bd16fb4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dictionary method 'iteritems' doesn't exist in Python 3.
Replaced 'iteritems' with 'items' to be able to run the
code under both Python 3 and Python 2.
[YOCTO #9412]
(From OE-Core rev: 5b14eb8d68aaca82de4f8f6bcb28ad6f4a5125d0)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Print statements have been replaced with print function in
Python 3. Replaced them in wic code to be able to run it
under both Python 2 and Python 3.
[YOCTO #9412]
(From OE-Core rev: ee6979a19c77931c3cf6368e695e370d46192fef)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If an image with the filename foo.bb could be built using the name "bar"
instead, then build-sdk would fail to create the derivative sdk.
This was because the code assumed that the file name matched the target,
which is not necessarily the case.
(From OE-Core rev: d58a326b6960be14b8a049253559aec9582b7d0d)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a branch is re-used, the kernel tools turns off any patch pushing unless
'mark patching' is explicitly set.
[YOCTO #9120]
(From meta-yocto rev: 427f5473722e15e288cbce251a9ce18989c23548)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix two problems falling back to the "license" field from package.json
when no license file is present:
1) The function that was supposed to return the license field value was
always explicitly returning None, and this was never noticed (because
the test cases never exercised the fallback as they provided license
files for each module).
2) Fix the main package not falling back because it had a default of an
empty list, which evaluates to '' instead of 'Unknown'.
(From OE-Core rev: 59381a9450949ce6b4b03adb717e950b999830f3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This aligns with our existing 'optional arguments' to 'options' change, and
seems more intuitive for users.
(From OE-Core rev: 8a1cd471210e5fb77952f28172084bf6a4fb73e8)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There's no need to iterate over the action groups here, as self._optionals and
self._positionals are available.
(From OE-Core rev: 408694f4320f3cb52a391e5b927fb8c8ba16c1d2)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As an example, `recipetool create foo bar baz` shows `recipetool: error:
unrecognized arguments: bar baz` and then displays the main help, not the help
for the create command. Fix by saving the subparser name and using it in
parse_args() to look up the subparser.
(From OE-Core rev: 7fdaaedf4c63c8d019f03f84e22f9b838ef19aa6)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This aligns our subclassed error() with that in the original class, using
_print_message and self.prog. Also add a docstring based on the original.
(From OE-Core rev: cf0c5175136966eefde8c0d9aa0679e85779f713)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used sparse_copy API in favor of dd/cp in rawcopy plugin to
preserve sparseness of the copied raw content.
[YOCTO #9099]
(From OE-Core rev: 04eca59068a79ae6a9969be495c4cdf0c5c3e466)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Copied partition images into final partitioned image using
sparse_copy API. This method preserves sparseness of the
final image. It also makes wic much faster, as unmapped
blocks of the partition images are not copied.
[YOCTO #9099]
(From OE-Core rev: 7f21427aca5df81d8881027fd98f71b821cf31d7)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to make wic images sparse sparse_copy function has been
copied from meta-ostro:
https://github.com/kad/meta-ostro/blob/master/meta-ostro/lib/image-dsk.py
This function uses filemap APIs to copy source sparse file into
destination file preserving sparseness.
The function has been modified to satisfy wic requirements:
parameter 'skip' has been added.
[YOCTO #9099]
(From OE-Core rev: bfde62bdc03152a4d3d383512479b974fa867f94)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to make wic images sparse set of APIs has been copied
from bmap-tools project.
filemap.py module is taken from bmap-tools project:
https://github.com/01org/bmap-tools/blob/master/bmaptools/Filemap.py
It implements two ways of get information about file block: FIEMAP
ioctl and the 'SEEK_HOLE / SEEK_DATA' features of the file seek
syscall.
Note that this module will be removed as soon as bmaptool utility
supports copying sparse source file into destination file (this is
already agreed with the maintainer of bmap-tools project).
[YOCTO #9099]
(From OE-Core rev: 182639ddc9cda85c896a54c1c64fd1fb145071a1)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved DiskImage class from utils/fs_related.py to
imager/direct.py as it's only used there.
Removed fs_related module as it doesn't contain anything
except of DiskImage.
(From OE-Core rev: b3cc471790784c28f9362fcd6fc6a81c4316754c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed fs_related.makedirs as is not used anywhere. The name is
easy to confuse with os.makedirs.
(From OE-Core rev: 796b114863ef20fbc89da45dbe6780abe1256f5e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no need in this inheritance as DiskImage class
is used only in one module and no other classes are inherited.
(From OE-Core rev: 5af1d9bedc2c961eb91faf80251f24c3df754d76)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used truncate instead of dd to create wic images for the
following reasons:
- dd doesn't preserve sparseness
- truncate syntax is much more clear
- dd requires additional calculations of the image size
in blocks
- the way dd was used in the code is not always correct.
In some cases it was writing one block to the file which makes
it not 100% sparse.
[YOCTO #9099]
(From OE-Core rev: d2d0d18dfd3922411d856b98ab6ba5d64c9c1c9f)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added explanation of --system-id option to the output of
wic help kickstart.
[YOCTO #9096]
(From OE-Core rev: 1a304afea4ad7be12ed5f0fcb397a538345a6b63)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used sfdisk to set partition system id if --system-id parameter
is used for a partition in wks file.
[YOCTO #9096]
(From OE-Core rev: a1f7f7e61fd20fb6319825648930f7b6aa0e0cee)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added new argument to add_partition call to pass partition
system id down the stack.
[YOCTO #9096]
(From OE-Core rev: f2733df697192c0010c17b7bbb02f8679cb8f313)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added Partition.system_id attribute and initialized it
from parse result of wks option --system-id. It will be
used by the wic code below the call stack to set partition
system id.
[YOCTO #9096]
(From OE-Core rev: 4f195a5b7574ebff8fbdb3045daa71f173f97a30)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added sfdisk -> util-linux pair to the dictionary
executable -> recipe as sfdisk is going to be used by wic
to set partition system id.
[YOCTO #9096]
(From OE-Core rev: 398aafa185acbc7239505f7107735e93a502f6d2)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added new option --system-id to wks parser. The option
will be used to set partition system id.
[YOCTO #9096]
(From OE-Core rev: b9c56b1c95cd1d0fd809d257e0cd05a50c481bed)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
os.path.join discards the cr_workdir var contents if the path of the
second arguments is absolute.
(From OE-Core rev: dba099d77dcc66b239523a55f3ed26784f9a662a)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The latest wic kickstart refactoring introduced a bootloader option
"--configfile" which lets wks' specify a custom grub.cfg for use
while booting. This is very useful for creating stuff like boot menus.
This change lets isoimage-isohybrid use --configfile; if this option is
not specified in a wks, it generates a default cfg as before.
(From OE-Core rev: bf673a769514b13558ad9c785ae4da3a5adfd1e0)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If UNINATIVE_CHECKSUM changes over an SDK update, bitbake within the
extensible SDK will be broken because it will see that the matching
uninative tarball doesn't exist and if there is a default value of
UNINATIVE_URL it will attempt to download the file and will then fail
because the checksums don't match up; alternatively if no UNINATIVE_URL
is set then it'll also fail with an error about misconfiguration. To fix
this, add some logic to devtool sdk-update to download the matching
uninative tarball(s) for the checksum(s) in the newly fetched SDK
configuration.
Fixes [YOCTO #9301].
(From OE-Core rev: 14ff58ad98a5afac08db77068d80f152d8875766)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace git pull with fetch and reset to avoid the merge logic in the
event that the layers repo in the published SDK we're updating to isn't
fast-forward merge from the local repo.
Also add gitignore and committer info during publish to avoid errors and
to be sure that the first commit has a dummy user in it.
[ YOCTO #9368 ]
(From OE-Core rev: 4657bc9d165e51981e034e73e7b92552e873eef7)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is unusual but not impossible to find recipes whose first entry is
not the main source URL but instead some patch or other local file, for
example python-cryptography in meta-python (which sets SRC_URI before
inheriting pypi). There's nothing inherently wrong with this, and we
shouldn't assume that the first entry is the main source URL, so just
take the first non-local entry instead.
(From OE-Core rev: c868198c1f6006789707b497c2ae34d7cc5e706f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partitions specifying --fsoptions were silently skipped by wic
due to the old bug introduced when removing code related to
subvolume handling:
- if mountpoint == "/" or not fsopts or fsopts.find("subvol=") == -1
+ if mountpoint == "/" or not fsopts:
[YOCTO #9396]
(From OE-Core rev: be7ff1741e8ab5f2724b3f64da1bed8b0d3dcb7c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It turns out that dd's conv=sparse doesn't look at the file extents, but simply
checks if a "block" is all zero. If the block of zero was meaningful it gets
lost and if the image is subsequently written to media using a sparse-aware
writer then the block of zeros won't be written at all.
This reverts commit 5fd592fbae2e046bcb8c3a6c3ef4993fe0400676.
(From OE-Core rev: 63d15764cc2014dba9fee2186f0c8b97c2ac5682)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The individual partitions created by wic are sparse but without
this change the assembled image is written as one (potentially
very) large file.
Preserve sparseness in the assembled image by passing the sparse
conversion symbol.
[YOCTO #9099]
(From OE-Core rev: 5fd592fbae2e046bcb8c3a6c3ef4993fe0400676)
Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix typo of the word "parameter" in for 'yocto-bsp create'.
Typo appears in both, usage and help.
Also, the word "description" is mispelled.
[Yocto #9282]
(From meta-yocto rev: 12c7243abd91b374b1b62c6a1ad13b0d25aa0e4c)
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default cpio preserves the uid&guid's of the original user which
leads to host contamination and boot failures because commands like
mount from initramfs expect to be run by root and the original host
user might not even exist on the target.
(From OE-Core rev: 28910ee2eacc15cf42b5e58bd43b3bd15c34eb97)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some filenames can omit 'initramfs', or use other names. This makes
detection more flexible by using only the image name, machine arch and
image type in a glob wildcard.
(From OE-Core rev: ca516f5907a661606c35e1ca5c2ece9fc79c77ea)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kernel recipes for linux-yocto_4.* and greater have outdated branches as default,
making it impossible to find the right branch if the user picks the default value.
The branches_base property uses these outdated branches also.
This updates standard/common-pc and standard/common-pc-64 branches to standard/base.
The fix was tested using 'yocto-bsp create' with each one of the following
archs:
-i386 with kernels 4.1 and 4.4
-x86_64 with kernels 4.1 and 4.4
-qemu (i386 and x86_64) with kernels 4.1 and 4.4
After the layer was created, it was added to local.conf and the MACHINE was set
accordingly.
'bitbake linux-yocto' ran successfully with each configuration tested.
[YOCTO #9160]
(From meta-yocto rev: d471e3dd7c5080a29f64b60b554f17ee706ee772)
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Strictly speaking we ought to explicitly shut down a tinfoil instance
when we're done with it. This doesn't affect modify's operation but is
important if you want to be able to call into modify() from another
plugin (though anyone doing so should be advised that the function is
by no means a stable API and is subject to change in future releases).
(From OE-Core rev: 626dbadf22b57a22a8f8b9d1957937120f4ba4d5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Type of --no-table option was incorrectly set in new wks parser.
It causes parser to require argument for this option, which makes
wic to fail with wks files that use --no-table:
Error: argument --no-table: expected one argument
Changed action parameter to 'store_true' to fix the issue.
(From OE-Core rev: d483724cf3515f76e1b798a2018e2f3fa2bad0ba)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the options --codedump and --skip-git-check to the yocto-bsp help and
yocto-bsp usage, since they are currently missing.
[YOCTO #8322]
(From meta-yocto rev: dfdf97b4239639affc8ce22e338a291d4b0dfc76)
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we add from a fetched URL we are supposed to turn the resulting
source tree into a git repository (if it isn't already one). However, we
were using the older deprecated option name here instead of the
positional argument, so "devtool add -f <url>" resulted in the repo
being created but "devtool add <url>" didn't, which was wrong.
Also update the oe-selftest tests to check that this worked.
(From OE-Core rev: a7b6b1f8cc1c096724f794ac9dee312b0f771f66)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The npm class just installs whatever is in ${S}; if you're using
externalsrc in conjunction with it the symlinks (oe-workdir and oe-logs
by default) plus singletask.lock will end up in the final package, which
isn't really right. Introduce a variable so we know the path the files
will be installed into within npm.bbclass, and append to do_install
within the workspace bbappend to delete the files.
(From OE-Core rev: 766845e06db9d7d595e836ea1364c16fa132a413)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The code here for running do_configure if it hadn't already been run was
using the wrong string substitution parameters; fix it and test it.
(From OE-Core rev: b2677a4448dbc42e523c731b953b44006749252c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default the sdk-install subcommand expects to restore the requested
items from sstate and fails if it can't. If the user is OK with building
from source, add a -s/--allow-build option to allow them to do that. In
the process, ensure we show the status output while we're installing.
Also add the missing header to the top of the file.
(From OE-Core rev: a86b426cdd465ec5cb08bb5fa7729e4e673d94bb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otherwise (if the symlink is named .config) kernel build considers
source tree as dirty and fails.
[YOCTO #9270]
(From OE-Core rev: d36699b28c661880957d744420df9e23cdd76957)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The extra directory next to the recipe should only be created if there
are files to put into it; currently only the npm plugin does this. I
didn't notice the issue earlier because the test was actually able to
succeed under these circumstances if the recipe file came first in the
directory listing, which was a fault in my original oe-selftest test;
apparently on some YP autobuilder machines the order came out reversed.
With this change we can put the oe-selftest test that highlighted the
issue back to the way it was, with an extra check to reinforce that only
a single file should be created.
(From OE-Core rev: b8b778345eb0997c2cd952a1f61fdd2050b6b894)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"npm shrinkwrap" creates a file that ensures that the exact same
versions get fetched the next time the recipe is built. lockdown is
similar but also includes sha1sums of the modules thus validating they
haven't changed between builds. These ensure that the build is
reproducible.
Fixes [YOCTO #9225].
(From OE-Core rev: 277377f13b2b771915eb853e336ca24b84523ed1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow plugins to create additional files to go alongside the recipe. The
plugins don't know what the output filename is going to be, so they need
to put the files in a temporary location and add them to an "extrafiles"
dict within extravalues where the destination filename is the key and
the temporary path is the value.
devtool add was also extended to ensure these files get moved in and
preserved upon reset if they've been edited by the user.
(From OE-Core rev: 334b9451111b7e3efbb43b3a4eecebcab8ec6f0e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the user specifies an npm:// URL then the fetcher needs npm to be
available to run, so check if it's available early rather than failing
later.
(From OE-Core rev: a08d12ad867c292f7474731a0fe5e51e712446d6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than rolling all of an npm module's dependencies into the same
package, split them into one module per package, setting the SUMMARY and
PKGV values from the package.json file for each package. Additionally,
mark each package with the appropriate license using the license
scanning we already do, falling back to the license stated in the
package.json file for the module if unknown. All of this is mostly in
aid of ensuring all modules and their licenses now show up in the
manifests for the image.
Additionally we set the main LICENSE value more concretely once we've
calculated the per-package licenses, since we have more information at
that point.
(From OE-Core rev: 8226805f83d21e7c1d2ba21969f3e8ee4b137496)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Matching license texts directly to md5sums only goes so far. Some
licenses make the copyright statement an intrinsic part of the license
statement (e.g. MIT) which of course varies between projects. Also,
people often seem to take standard license texts such as GPLv2 and
reformat them cosmetically - re-wrapping lines at a different width or
changing quoting styles are seemingly popular examples. In order to
match license files to their actual licenses more effectively, "crunch"
out these elements before comparing to an md5sum. (The existing plain
md5sum matching has been left in since it's a shortcut, and our list of
crunched md5sums isn't a complete replacement for it.)
As always, this code isn't providing any guarantees (legal or otherwise)
that it will always get the license correct - as indicated by the
accompanying comments the LICENSE values it writes out to the recipe are
indicative and you should verify them yourself by looking at the
documentation supplied from upstream for the software being built if you
have any concerns.
(From OE-Core rev: 553bb4ea5d51be5179e7d8c019740cf61ece76ea)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For example, this picks up a file named MIT-LICENSE.txt.
(From OE-Core rev: 103b4d26b340cbdf70bf43906e293f3497671fdc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make the following improvements to mapping items specified in
AC_CHECK_PROG, AC_PATH_PROG and AX_WITH_PROG to recipes/classes:
* Produce a map of native recipe -> binary for all binaries currently in
STAGING_BINDIR_NATIVE and use this when mapping items
* Add some more entries to the class map
* Ignore autotools binaries since they are covered by the inherit of
autotools
* Ignore coreutils-native since that would almost always be a bogus
dependency
(From OE-Core rev: 5614c5ae6a004d4367eccc34dd3cc7ee61fb7e57)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow for whitespace in appropriate places, and ensure we match all
whitespace chars not just the space character.
(This fixes extracting dependencies from tmux's configure.ac, for
example.)
(From OE-Core rev: 63524ac8093b734aa4f29f4ea47bcc036f748314)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add kernel 4.4 support. kernel 4.1 was left in the
tree for user to choose between 4.1 and 4.4.
[YOCTO #9047]
(From meta-yocto rev: c04093ec9b3cd151cf857bca9ad35bc9a0d4a4b1)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Clearly I didn't test this part of the code - lists don't have an "add"
method. Needless to say I have tested it now.
(From OE-Core rev: 063ed9058a14775f77e7875d4f6ef5719fa03f18)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a build-sdk command which is only available within the extensible
SDK that builds a derivative extensible SDK. The idea is recipes in the
workspace become a part of the new SDK - for example, this allows taking
a vendor provided SDK, adding a few libs and then producing a new SDK
with those included.
When normally building the extensible SDK, the workspace is excluded;
here we need to copy into the new SDK (renaming it in the process); the
recipes' task signatures become locked and thus the sources are no
longer needed, so they are removed along with the workspace bbappends
which would interfere with the locked signatures. Additionally we need
to just copy the configuration files (i.e. local.conf and auto.conf)
rather than filtering and appending to them since that work has already
been done when constructing the original SDK. The extra sstate artifacts
from workspace recipes are also determined and copied into the new SDK
in minimal mode (on the assumption that you won't set up a new sstate
mirror).
This reuses some code from build-image, so that needed to be
generalised to allow that.
Implements [YOCTO #8892].
(From OE-Core rev: 59e207ff6dd4b50a8905e14bc9292cf2794f4e7a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hyphens aren't allowed in python identifiers, so you shouldn't use them
in module names or they are more difficult to import.
(From OE-Core rev: e8f6db9436dfc923e236f2cbc08f357e3b24fd5d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"sdk_update" uses a variable newsdk_path, which was never declared.
This would cause the command:
devtool sdk-update <poky-sdk-latest>
to fail with an error:
NameError: global name 'newsdk_path' is not defined
The remedy is to declare newsdk_path as it was no doubt intended,
corresponding to the argument specifying <poky-sdk-latest>.
[YOCTO#9042]
(From OE-Core rev: 6ac589a4a9290665f8c5295e2e2a03a2b187b957)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add detection for npm modules and support for extracting the name and
version from package.json as is usually part of an npm module contents.
Note: this will likely only produce a buildable recipe if you use an
npm:// URL; simply pointing to a node.js source repository isn't going
to fetch the module's dependencies. It also doesn't set up the
shrinkwrap/lockdown automatically, so there is some room for improvement
later.
Implements [YOCTO #8690].
(From OE-Core rev: 41d0e4d75f13b53a6c1b6a8df9be4742be7534e0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support for detecting a Linux kernel source tree and generating a
basic kernel recipe using meta-skeleton's linux-yocto-custom recipe as a
base.
Implements [YOCTO #8981].
(From OE-Core rev: 39cab544b80ca4450106c9ede3180929ba24703c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Detect kernel modules by looking for #include <linux/module.h>, and
handle the various styles of Makefile that appear to be used. I was able
to use this code to successfully build a number of external kernel
modules I found.
Implements [YOCTO #8982].
(From OE-Core rev: a85604f2eb2438b4caf0832c2ea15b5822f7e9a1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were creating the partition, mkswap'ing it, and then not dd'ing it into
place in the final image, as source_file wasn't being set for swap partitions.
This would result in a swap partition that couldn't be enabled on target until
mkswap was run.
(From OE-Core rev: 7580942a66f84c2120763c2d9665e2cec8e25138)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make this consistent with "devtool add" so that the user knows where to
find the new recipe.
(From OE-Core rev: 28fea4a104ba85aded2ecfe891e9bf997d72a103)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The PR value should be reset to the default when upgrading, so we need
to drop it from the newly created file.
(From OE-Core rev: 4acf8a6912106dd3da5ceee9e30ccce86211d04b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We aren't modifying the datastore copy here, so we don't need a copy at
all.
(From OE-Core rev: 9f05bf98d4dbcb991b684a2ab480c6638c6be292)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix several issues when extracting the new version source over the top
of the old one (when the recipe is not fetching from a git repo):
* Delete the old source first so we ensure files deleted in the new
version are deleted. This also has the side-effect of fixing any
issues where files aren't marked writeable in the old source and thus
overwriting them failed (harfbuzz 1.1.3 contains such files).
* Fix incorrect variable name in abspath statement that made it a no-op
(From OE-Core rev: 4f7595a514661f0e2418393286849a1cb6c46f0d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we do an upgrade from one tarball version to another we want to:
1) Check out the old version as a new branch
2) Record the changes between the old and new versions as a commit
3) Check out the old version with patches applied
4) Rebase that onto the new branch
Where we went wrong was step #1 where instead we checked out the old
version with patches applied as the new branch, which meant the rebase
didn't do anything and any changes made by the patches to files still in
the new version were wiped out.
(From OE-Core rev: a4f3e6d5f4c549e36cce1e18801a565a3a3c9b0a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the actual value of PV isn't in the name of the recipe (for example,
a git or svn recipe) there's no point trying to rename it. Additionally,
we already have the original filename, there's no need to guess it -
just pass it in.
(From OE-Core rev: e144db3650b4a7c0a59066621905f34a5400303e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were trying to move this from the current directory instead of the
path. Let's just use shutil.move() instead of shelling out to mv.
(From OE-Core rev: 60454a0ba154d6c777e0c2b05b887b4e4fcde986)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For recipes that specify SRCREV, the code here wasn't quite doing the
right thing. If the recipe has a SRCREV then that needs changing on
upgrade, so ensure that the user specifies it. If it doesn't, then it'll
be "INVALID" not None since the former is the actual default, so handle
that properly as well. Additionally an unset variable was being
erroneously passed when raising the error about the version being the
same leading to a traceback, so fix that as well.
(From OE-Core rev: 1d0f821371d1cb93e30fad86f0c20e38cb93b54b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recipename argument to devtool upgrade specifies an existing recipe,
so by definition the name will be valid (or it won't exist) - we don't
need to validate it ourselves, that's only needed for situations like in
devtool add where we're creating a new recipe.
(From OE-Core rev: 1e2bc7d861555a04350a87f19047efdc717046be)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make devtool upgrade consistent with devtool add/modify in defaulting to
sources/<recipename> under the workspace if no source tree path is
specified.
(From OE-Core rev: 8a952407b192313515e91570632446b6dff01665)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you for example ran devtool modify virtual/libusb0 without specifying
a source tree path, the default was <workspace>/sources/virtual/libusb0
which isn't correct - it should be using the mapped name i.e.
libusb-compat (in the default OE-Core configuration). Reorder some of
the code to ensure that the mapped name is used.
(From OE-Core rev: c51736df17da8e6e561dd5b7ce59cb08254da870)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As suggested by Khem Raj.
(From OE-Core rev: 36cc6b81d0281348a0f241a80ddd427745a6a678)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create config fragment if the user makes modifications to kernel config.
User may change .config e.g. by directly editing it or by running the
'do_menuconfig' bitbake task. Devtool generates one monolithic fragment
by simply doing a diff between .config and .config.baseline files in the
source directory. If either of these files is missing, the config
fragment is not gerenrated or updated. The output is a file,
'devtool-fragment.cfg' that gets added to SRC_URI in the recipe (as well
as copied into the 'oe-local-files' directory if that is present in the
source tree).
${S}/.config will be a symlink to ${B}/.config. We need to do this as
devtool is not able to access ${B} because ${B} is set in a .bbappend in
the workspace layer which is not parsed by devtool itself.
[YOCTO #8999]
(From OE-Core rev: 524da136e5b837a60682516ac08f3092c635e934)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Copy kernel config is copied to the source directory at a later phase in
_extract_source() so that it gets copied when devtool sync is done, too.
(From OE-Core rev: ff895be7a46c4b3b1b791e5387490d90bb34fce2)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"poky" is the reference distribution for the Yocto Project. This renames
the layer within the meta-yocto repository to meta-poky, better matching
what that layer contains.
A layer.conf file is left behind as this is the only way which allows
existing builds to migrate safely to the new name. It will be removed
at some future point.
This change requires the corresponding OE-Core change to handle the
migration and the changes to the infrastructure to support this.
(From meta-yocto rev: d0c88df2e14672fca4ebbde93c5efbcd0e4fa9b6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Package names are actually case sensitive near as I can tell, so we
shouldn't be lowercasing them everywhere.
* Look for CMake packages in pkgdata and map those back to recipes,
so we aren't dependent on the hardcoded mappings (though those are
still preserved).
* Avoid duplicates in the unmapped package list
(From OE-Core rev: 2ddad52ccca07245eea43d9b844c6c7d4b667ca3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a means of extending the dependency extraction for autotools and
cmake.
Note: in order to have this work, you need to have an __init__.py in the
lib/recipetool directory within your layer along with the module
implementing the handlers, and the __init__.py needs to contain:
# Enable other layers to have modules in the same named directory
from pkgutil import extend_path
__path__ = extend_path(__path__, __name__)
(From OE-Core rev: 915dea9f89cd737e5ba167c384e8d314c5c23c49)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I should have adjusted this in OE-Core commit
80a44e52609a89d9ffe816181ae193af491c06ac where the behaviour changed.
(From OE-Core rev: 13409a2b899bb74b8060c840b8c7ef8759d099cb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If files would be overwritten by the deployment, preserve them in a
separate location on the target so that they can be restored if you
later run devtool undeploy-target.
At the same time, also check for sufficient space before starting the
operation so that we avoid potentially failing part way through.
Fixes [YOCTO #8978].
(From OE-Core rev: a2da55712691bcf1066c53d813107d75213d6b10)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you want to put the target device back to exactly how it was before
devtool deploy-target started poking things into it, then it would make
things easier if you didn't have to figure out which recipes were
deployed. Now that we have the list stored on the target we can
determine this reliably, so add a -a/--all option to undeploy-target to
undeploy everything that has been deployed.
One of the side-effects of this is that the dry-run functionality for
undeploy-target had to be reimplemented to actually run the script on
the target, since we have no way of knowing what's been deployed from
the host side. We don't need to do the same for deploy-target though
since we know exactly which files will be deployed without referring to
the target.
(From OE-Core rev: 41fed83060f0041e14e455d1446397bda277d953)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When running devtool deploy-target, we save a list of deployed files,
and this list is used by devtool undeploy-target (or the next time
deploy-target is run if the list is present, in case any files have been
renamed or deleted since the first time). We were writing this file to
the host, but it makes more sense to write the list to the target
instead, so that if we for example swap in a different board, or switch
hosts, things will work as expected.
In order to do this properly we have to construct a shell script and
ship it over to the target so we can run it. The manifest is written out
to a hidden directory in the root (/.devtool).
Fixes [YOCTO #7908].
(From OE-Core rev: a16a0c9334b785e2df896266c8911a2c7a1806b8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Get the default value for updateserver from the configuration file and
show it in the help; also only make the parameter optional if it's
specified. This means we can also drop the check in the function as
argparse will then ensure it's specified if there's no config setting.
(From OE-Core rev: 82497bde58fc8bdae8d8acfbf025a1a90b14cc3e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a long description used when running --help on the specific command.
(From OE-Core rev: eb7787d1652fd84a149fd394969f4f1099406051)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Naming these as "optional arguments" is perhaps slightly confusing since
some of the positional arguments might also be optional; in addition
it's rare (though possible) for options to be mandatory - up until
recently we had a recipetool option (-o) that was mandatory. It's not
perfect, but change it to "options" so it's at least a bit more
appropriate.
(From OE-Core rev: 55e675de6191bf7eccd26df29189f2a6faa40a20)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The listing of subcommands in the --help output for devtool was starting
to get difficult to follow, with commands appearing in no particular
order (due to some being in separate modules and the order of those
modules being parsed). Logically grouping the subcommands as well as
being able to exercise some control over the order of the subcommands
and groups would help, if we do so without losing the dynamic nature of
the list (i.e. that it comes from the plugins). Argparse provides no
built-in way to handle this and really, really makes it a pain to add,
but with some subclassing and hacking it's now possible, and can be
extended by any plugin as desired.
To put a subcommand into a group, all you need to do is specify a group=
parameter in the call to subparsers.add_parser(). you can also specify
an order= parameter to make the subcommand sort higher or lower in the
list (higher order numbers appear first, so use negative numbers to
force items to the end if that's what you want). To add a new group, use
subparsers.add_subparser_group(), supplying the name, description and
optionally an order number for the group itself (again, higher numbers
appear first).
(From OE-Core rev: e1b9d31e6ea3c254ecfe940fe795af44761e0e69)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we didn't make any changes to the file then there's no point warning
the user that we have done.
(From OE-Core rev: 391b9ba30d802ac420ddf382588e03e718861c01)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If files had been created next to the recipe (for example devtool add,
edit the source and commit and then devtool update-recipe), running
devtool reset failed to preserve those files and gave an error due
to trying to rmdir the directory containing them which wasn't empty.
Fix the preservation of files in the "attic" directory properly so
we catch anything under the directory for the recipe, and replicate
the same structure in the attic directory rather than slightly
flattening it as we were before.
(From OE-Core rev: bbe63eb97ae7f78959f117d6066ef821c4da1c77)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Looking at Chris Larson's code for starting the user's editor for
"recipetool newappend" it was slightly better than what I wrote for
"devtool edit-recipe" in that it checks VISUAL as well as EDITOR and
defaults to vi if neither are set, so break this out to its own function
and call it from both places. The broken out version passes shell=True
however in case it's a more complicated command rather than just a name
of an executable.
(From OE-Core rev: 184a256931e8cdc7bea97a905c4e67a435964de0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no -N/--name option for devtool, that's a recipetool option -
with devtool you just specify the name as a positional argument.
(From OE-Core rev: d2bc0cba5ca8a7220ffe1ef96acf856fe972ce7c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Processing of this option was lost during recent change of
wks parsting. It was discovered during the work on booting
wic images under qemu. Now, when -use-uuid is fixed it's
possible to specify root partition by partition uuid.
This will be done in the following commit.
(From OE-Core rev: b4882e0b84d7fd4c85ee95386e94722485eafc2b)
(From OE-Core rev: 73e9e3f150bf2de9b27c2ccc73e3dee334ee73fe)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you specify a local directory which happens to be a git repository
with an origin remote (and it is in fact remote), we can use that for
SRC_URI as implemented by OE-Core revision
b143d414846854dc8b3e0a47358daf5646eded38, however we also need to set S
if the recipe is going to be of any use fetching from that SRC_URI
later.
(From OE-Core rev: 8bbbd2d63f1bc752f9a30054a089dc2caf5fd84c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When recipetool create is given a URL that starts with http(s):// and
contains /git/, such as the URLs at git.yoctoproject.org, it's fairly safe
to assume it's a git repository and not something that should be fetched
with wget, so rewrite the URL.
(From OE-Core rev: 3ca04757a670e8b6f78799cc0454d75691809ac4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When auto-detecting the name for a recipe from the URL, strip off any
parameters (";name=value...") before parsing the URL, otherwise this
just ends up in the recipe name which is undesirable.
(From OE-Core rev: d3c46b5d0abd56bcadd4f2f1ef985f13d67f605b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix a regression introduced in in OE-Core revision
aedfc5a5db1c4b2b80a36147c9a13b31764d91dd where specifying a local source
tree without specifying a name resulted in a traceback.
Fixes [YOCTO #9086].
(From OE-Core rev: 67ea9d21f20a371a0ee443b46326018cb1527b62)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's going to be more common for users not to have the prepared source
tree for a recipe already, so the default behaviour ought to be to
extract it for them from the recipe. Change the default to extract
(effectively making the -x option a no-op) and add a --no-extract/-n
option to disable it. Later we can look at trying to be smart and
reusing an existing source tree instead of erroring out if it exists;
for now this is just the default reversal.
(From OE-Core rev: 80a44e52609a89d9ffe816181ae193af491c06ac)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Both BitBucket and GitHub provide "release" downloads that unfortunately
don't include the actual project name. For recipetool this means we have
to have special handling for these URLs or else the current code assumes
the name of the project is something like "v0.9.1". Borrow and adapt
some code from autospec to do this, and put it in its own function for
clarity.
(From OE-Core rev: e8435fde7f82c39cc0efe1d4bf043b29f63898e9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
CMake supports a find_library() directive to find named libraries, so
detect dependencies from this.
(From OE-Core rev: d0265bc67f797ee4b7760cf37335994133809abf)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When extracting source for a recipe, if there are additional custom
tasks run that make changes to the source, create a commit in the
generated git branch so they are contained. This is particularly
useful for tasks that come before do_patch since otherwise the changes
might get incorporated in the first applied patch, but otherwise it
helps avoid the tree being dirty at any point.
Fixes [YOCTO #7626].
(From OE-Core rev: 997a77d9b20af1778b804778e5d8c8a7424f7582)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make path to newly generated README file legitimate
(From meta-yocto rev: 32286bb798c2778457b5578b4b590629c96a0ee2)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Take `pwd` to be <initial-dir>. The %s path is relative to it. The value
of %s is "output_folder/build". The current code works as follows:
Changing directory to %s and finding the sources (after cd'ing) to cpio
with output redirection to %s/initrd.cpio triggers the following error
"Error: exec_cmd: cd output_folder/build/INITRD && find . | cpio -o -H
newc >output_folder/build/initrd.cpio returned '1' instead of 0"
This happens because after the cd, `pwd` is <initial-dir>/%s and by the
redirect we write the result to to <initial-dir>/%s/%s/initrd.cpio which
obviously does not exist.
Fix this by getting the sources with "find %s" instead of "cd && find ."
(From OE-Core rev: 07fa4783566d22d46ce719a621eee5404932dbbe)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
.iso image creation fails if during the image creation syslinux
is baked and syslinux-native is not.
Added new check to verify if both syslinux and syslinux-native
are baked and bake them if these are not installed.
(From OE-Core rev: fd5749832960ad3b85697c2878490d6f008982a3)
Signed-off-by: Mihaly Varga <mihaly.varga@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A kickstart file for non-x86 boards may have no 'bootloader' stanza. It
is the usual case if bootloader is setup using other mechanism than
through wic, and is for instance a part of u-boot configuration. In such
case the 'bootloader' field in the KickStart class will be
uninitialized. Instead of adding an empty bootloader line in every
kickstart file call the bootloader parser with empty argument list to
get defaults namespace.
(From OE-Core rev: 264c03e854f77c3b62acb710384f66716ccbf469)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When you need to set EXTRA_OECONF for a recipe, you need to know what
options the configure script actually supports; the configure script
however is only accessible from within a devshell and (at least in the
case of autotooled software fetched from an SCM repository) may not
actually exist until do_configure has run. Thus, provide a "devtool
configure-help" subcommand that runs the configure script for a recipe
with --help and shows you the output through a pager (e.g. less),
prefaced by a header describing the current options being specified.
There is basic support for autotools, cmake and bare configure scripts.
The cmake support is a little hacky since cmake doesn't really have a
concise help option that lists user-defined knobs (without actually
running through the configure process), however that being a design
feature of cmake there's not much I can think of to do about that at
the moment.
(From OE-Core rev: 0e5d84d9705091b338000ef02720cfa090f76888)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we run the tasks required to extract the source for a recipe (e.g.
within "devtool modify" or "devtool extract") if one of those tasks
fails you get a bb.build.FuncFailed exception; handle this properly so
you don't see a traceback.
(From OE-Core rev: 95d8631b3bdf216001e57f48277535c65a4cc49e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a recipe generated by "devtool add" has been modified since then when
you run "devtool reset", it will be moved into the "attic" subdirectory
of the workspace in case those modifications need to be preserved. It
seems natural that if those modifications were worth preserving we
should warn the user if such a file exists when they run "devtool add"
to create the same recipe again, so they can pick up where they left off
if they want to.
(From OE-Core rev: 0a39b907ff997c3a62c92ab22325c726b612de5b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provide an option to devtool build-image to specify the list of packages
instead of taking the list of packages produced by recipes in the
workspace. Sometimes you don't want all of these packages; other times
you want to add more.
This is the most immediate fix for [YOCTO #8855], though it is a little
crude so I would like to provide better means of customising the image
contents later.
(From OE-Core rev: b3a44951a74fe58714b72e71a7a558b67a71e1e3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
standard.py is getting a bit large; move the "utility" commands to
another module.
(From OE-Core rev: 5089b93f5b341dc28c343f7afe15efda2081ed36)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I was a little bit hasty in OE-Core revision
c2cc5abe34169eae92067d97ce1e747e7c1413f5 - it turns out BitBake's
fetcher code is not consistent in whether it logs something useful or
not; when fetching from an http URL it does but with a git repository
it doesn't. In advance of any major reworking of fetch error handling in
BitBake, let's just print the text of the exception and then we know we
have shown something to the user.
Additionally, we were only catching FetchException here but there are
several other classes of exception that the fetcher can raise (e.g.
MalformedUrl); catch the parent BBFetchException class instead so we
avoid tracebacks for those other classes as well.
(From OE-Core rev: 578d3873a6415c9203c185c21cff472f7d2dab02)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the URL ends in a / then we want to strip that off the path we split
out of the URL before calling os.path.basename() on it.
(From OE-Core rev: 308189beda8a31541481d09e3d5e86187e843d8d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you specify a local directory which happens to be a git repository
with an origin remote (and it is in fact remote), we can use that for
SRC_URI rather than leaving it blank in the recipe.
(From OE-Core rev: b143d414846854dc8b3e0a47358daf5646eded38)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes you don't want to build an entire project, just a subdirectory
of it; add a --src-subdir option to make that easier. (We still look for
a single subdirectory in what gets unpacked, e.g. what you might find
within a tarball, so whatever you specify with this option is added onto
the end of that.)
(From OE-Core rev: 59682d78f95732e014f78f13e0a05f843860d9bb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Quoting is optional in CMakeLists.txt and is occasionally used, so strip
out quotes if they are present.
(From OE-Core rev: 4ffe2e1ec9df05b92a2ad5746fb0ca6d218fd77e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the ability to install additional pre-built items (from shared
state) into the extensible SDK. This can already be done implicitly by
adding something to DEPENDS within a recipe you're working on and then
running "devtool build", but it's useful to be able to explicitly
install things particularly if you're using the extensible SDK as a
traditional toolchain.
Note that for this command to be useful you need to have SSTATE_MIRRORS
set in your SDK configuration, and that mirror needs to be populated
with sstate artifacts for recipes you wish to be able to install.
(From OE-Core rev: 3474a42954908d1688fd3a6cb600eed315b27833)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make the following improvements to the SDK update process:
* Use a manifest file with sha256sums to track files other than sstate
and metadata that we need to update - e.g. conf files. This allows us
to handle where files such as auto.conf may or may not be present,
as well as the configuration changing without affecting task signatures
- we still want the config files copied in that case rather than it
saying nothing needs to be done.
* Write the SSTATE_MIRRORS_append to site.conf rather than local.conf
so that local.conf remains static (since we don't want to trigger an
update every time). Also, If there is an SSTATE_MIRRORS value already
set in the configuration we can skip this and assume it contains the
needed packages.
* Allow the update process to be run in any directory, don't assume
we're already at the base of the SDK
* Where practical, fetch remote files into a temporary location and
then move them to the desired location at the end, to avoid a
failed update leaving the SDK in a broken state.
* Update all installed do_populate_sysroot / do_packagedata tasks
instead of using the SDK targets. This ensures any item installed
through dependencies after installation (e.g. when running
"devtool build") won't go stale.
(From OE-Core rev: 3d35631121f0e030bc8151f5c23d84008d06f44b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Use tempfile.mkdtemp() instead of hardcoding temp dir
* Set a variable early for the temp locked sigs file and use that
everywhere
* Delete the temp dir at the end
(From OE-Core rev: bad5d1a8c047a8118d30d9fa708b021d1599e0dc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When you run devtool build, you need to have the pkgdata written out at
the end, so that if what you're adding is a library and the next thing
you add is something that depends on that library, the necessary
information to map the dependency back to the recipe is present. In
practical terms all this means is we need do_packagedata to run in
addition to do_populate_sysroot.
This does mean that do_package needs to run which wasn't running before,
and that means that the few package QA tests that run within do_package
such as installed-vs-shipped will now be run. This may be a bit
bothersome, and prompted a fix for one of our oe-selftest tests as a
result, but I don't see an easy way around it. Ultimately if you care
about using the recipe in an image you'll need to fix any such errors
anyway.
Fixes [YOCTO #8887].
(From OE-Core rev: 6579c7120ee5a541427ff5b6b07f838d52f9fe7c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a variable SDK_INCLUDE_PKGDATA which you can set to "1" to include
pkgdata for all recipes in the world target. There are a couple of uses
for this:
1) If you use "devtool add" to add a recipe that builds something which
depends on anything in world, the dependency can then be correctly
mapped to the recipe providing it and that recipe can be added to
DEPENDS, since we have the pkg-config and shared library dependency
data within pkgdata.
2) You'll be able to search for these recipes and any files they
package for the target with "devtool search" since that also uses
pkgdata
This of course assumes you've tailored world through EXCLUDE_FROM_WORLD
to only include recipes you'd want built in your distro, but I think
that's a reasonable assumption; failing that there is a
WORLD_PKGDATA_EXCLUDE variable that you can set to exclude any recipes
you don't want.
Note that this patch relies on functionality implemented in a recent
BitBake patch and will not work without it.
Implements [YOCTO #8600].
(From OE-Core rev: 67149ea097d6fab7496b43e85a40853f40bd527e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added missing docstrings, fixed wrong indentation and long lines.
Final pylint score is 9.89/10
(From OE-Core rev: 6e5dd42727b40c6b5ba6235026a6cfc78f482ac9)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added description of 'include' parser command to the
'wic help kickstart' output.
(From OE-Core rev: 7481f39382e63ecbb5de406559cc28e5689bd974)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to give and example of 'include' feature of ks parser
and for testing purposes common parts of 3 canned wks files were
moved into common.wks.inc
(From OE-Core rev: 629c6381669bd4acdb1613229cd095881d2d9cd2)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used custom argument type to implement search of include
.wks files in canned wks paths. Include files can be
specified either by full path or by name.
[YOCTO #8848]
(From OE-Core rev: 3695962ba4b685f304f1039978cec60d1b1712e3)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This function is going to be used by ks parser to find include .wks
files. get_boot_config name is a bit confusing as function is quite
generic. It looks if file is present in the canned wks directories.
Renamed get_boot_config -> get_canned.
Renamed parameter file_boot -> file_name.
Updated description.
(From OE-Core rev: 8ea9a4c0422c9600cd33ec6e815ebcf2d0aad364)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Extended parser to support inclusion of .ks files:
recursively called self._parse to parse included .ks
(From OE-Core rev: 33dd323ec6a1a1ed4e1a04e51de182c89c7b6bd9)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Interesting bug was found during implementation of 'include'
parser command.
Build directory was removed in do_configure_partition method of
bootimg- source plugins. This can cause removal of previously
prepared partition images if /boot partition is mentioned after
other partitions in .ks file.
Moved work directory removal to direct.py before processing
partitions.
(From OE-Core rev: ba98262573cf1600e0d477317f51d488b5f8c4bd)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a preparation for 'include' support.
Used unique counter instead of line number for partitions
in .ks file. Line numbers can be equal for different .ks files,
which can cause problems if one .ks file is included into
another.
(From OE-Core rev: cc2233b51f1d22d4e540f4a3e9ceedd7ede9ffa9)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a preparation for implementation of include statement.
Parser will be called recursively to parse included .wks files,
so it should be available as a method.
(From OE-Core rev: 7778b9851758f4f782cb5f5d5fb36e68aed3b275)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I found these when I was looking at libftdi and they seem to be
generic enough to show up in at least a couple of other packages so I
figure I'll add them.
(From OE-Core rev: 9fa3ff44e05930d4dfa153db777077e747ecbf45)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support for extracting dependencies from CMakeLists.txt. There's
still a bunch of things missing that are outside the scope of OE-Core
and we still lack a proper extension mechanism, but this is a good
start.
This also adds an oe-selftest test to exercise the new code a bit.
Implements [YOCTO #7635].
(From OE-Core rev: 77e73e6930381fdbd6e78d3913d6467572e16568)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We want to specify dependencies on virtual/* rather than whatever
library is selected in the current configuration.
(From OE-Core rev: e1ac0c45b27ded9962edaf34597f827d0b41ba82)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some refactoring to allow access to the library/header/pkg-config
mappings and the DEPENDS / unmapped dependency output code from other
classes than AutotoolsRecipeHandler.
(From OE-Core rev: 40c10d998b90dd59c6d36c28f8ba11ec598bfa0f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The regex for detecting git URLs was unanchored, leading to it matching
where it shouldn't have. An example of where this went wrong was
http://taglib.github.io/releases/taglib-1.9.1.tar.gz.
(From OE-Core rev: bacff751c88b680fbfb07843b18c59c8bc80a9ea)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Support a number of macros from autoconf-archive when reading
configure.ac to extract dependencies.
(From OE-Core rev: ee977a62c58ded361c2abd78654bd25637fe9ea1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are a few different macros that can be used to pick up these
tools, add support for them all.
(From OE-Core rev: 7dfff4b7f05653aea230294ff1a7c023730deff9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The presence of BOOST_REQUIRE or AX_BOOST.* indicates that boost is a
dependency.
(From OE-Core rev: 02570b1fc31c7f4e9643aea8365806089622c0e7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* The regexes for PKG_CHECK_MODULES / AC_CHECK_LIB were a bit too strict
and thus we were skipping some macros.
* Add support for PKG_CHECK_EXISTS
* Avoid duplicates in warning on missing pkg-config dependencies
* Ignore dependency on musl (since this may come up if it's the selected
C library)
(From OE-Core rev: c58669fb0977f7f0cb79f252484d5c5ef0dfb7e4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
kickstarter.py was not the best name for this module as previously
there was a directory with the same name in scripts/lib/wic/.
All files were removed from it, but .pyc files could still stay there
causing imports from wic.kickstart to fail with
ImportError: cannot import name KickStart.
(From OE-Core rev: b9d400be06bc4a4bb9f9c6a6a0c8e5ecfd4e2dfb)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Overriden error method to throw exception instead of
printing usage error message. Exception is caught by
KickStart code to add .ks file name and line number.
(From OE-Core rev: 373016ba08c2ec4dbcd44649d9c8cd57d5574402)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed imports of wic.kickstart from plugins as they're
not used in the code.
(From OE-Core rev: 33d8784470c506fabcf9627e754628cdea61dd07)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Caught argparse.ArgumentError
Included .ks file name and line number into the error messages.
(From OE-Core rev: 549c76ebda9afba0771d6d2c9b0b83f7a479c626)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Catch parsing errors and output them using msger.
(From OE-Core rev: 9c058f115583592f5cce2a969882fdd0c2ab535f)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This exception will be raised by kickstart parser
on parsing errors and processed in the code which
calls parser to produce meaningful error output.
(From OE-Core rev: 13092793693c1c0ea172701578506f4a70a093d2)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without one of the --ondrive, --ondisk or --use-uuid options for a
partition with a mountpoint specified the automatically generated
fstab entry will be invalid.
[YOCTO #8844]
(From OE-Core rev: a524ced19db05e776834cd1f1db03c68a05f9c0b)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used partitions and configfile bootloader attributes instead of
using getters get_bootloader_file and get_partitions.
(From OE-Core rev: d34dd190e1da00ca8c9b2cb0adba15b9f0de2920)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used size and source_file attributes instead of using
setters. It's more pythonic, clear an consistent.
(From OE-Core rev: 7cf236047fa5d0d947fd214181c9a63ccb2509ac)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Got rid of get_rootfs and set_rootfs java-like getter and
setter. Renamed rootfs to rootfs_dir to be consistent with
the name of kickstart parameter --rootfs-dir.
(From OE-Core rev: 51ec52a62ce49d1a1a83489379990f78cfe849f9)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used bootloader.timeout instead of kickstart.get_timeout getter.
Accessing attributes instead of getting them with getters is
more pythonic, shorter and readable. It also more consistent as
most of partition and bootloader attributes are used this way.
This change also takes care of appendLine bootloader attribute:
it's renamed to bootloader.append attribute provided by new parser.
(From OE-Core rev: 8088caeff5bf4ee9279b47a69c9f1e5537909601)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New data structure is less nested than old one.
Adjusted bootloader and partitions fields:
self.ks.handler.bootloader -> self.ks.bootoader
self.ks.handler.partitions -> self.ks.partitions
(From OE-Core rev: b46da0731e3f7016d0ab2a67967f07c7e199f219)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed pykickstart-related code as it's replaced by
new kickstart parser.
(From OE-Core rev: 30bb1f3b6b832f9be691350581458c5fdaaaad70)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used KickStart parser class instead of pykickstart API.
This commit breaks wic as data structures and field names
provided by new API are a bit different from old ones.
This issue will be addressed in the following commits.
(From OE-Core rev: f72439d321220b724bfe2b4a92fed46c2c19fb3f)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This module will replace existing pykickstart machinery
it contains only option used by wic, it's simple and
clear. And It will allow to remove a lot of old complex
code from 3rdparty/pykickstart/ and kickstart/custom_commands.
(From OE-Core rev: c7b67ccfda8b22c090aa74d96b7c9af5a97a9a98)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Copied partition-related API from kickstart/custom_commands/partition.py
to separate module in preparation for removal of all
pykickstart related code.
(From OE-Core rev: a915c4cbc33ef0a12546ac0000ecf8aedb6241d5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than horrible workarounds, use the new --setscene-only option
of bitbake to pre-populate the SDK structures.
(From OE-Core rev: 38237b7ac53c416f85c4a70a61acafc3404c8b5f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's logical that you would want to build BBCLASSEXTENDed items
separately through devtool build, so simply allow that - we're just
passing the name verbatim to bitbake, so all it means is adjusting the
validation.
(From OE-Core rev: 25dc5ac42c9da53c01416e7fdcc819d729281133)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the recipe file itself was created in the workspace, and it uses
BBCLASSEXTEND (e.g. through devtool add --also-native), then we need to
clean the other variants as well.
(From OE-Core rev: e1bf6a30679a83d4dbcf37276204f639541e95f9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We're doing this in a couple of places, let's just find the recipe file
if it exists within the workspace (which it will if it's been added
through "devtool add") when we read in the workspace.
(From OE-Core rev: 81cf5580993c99050e3f4d6d891bc67534721487)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes you need to build a variant of a recipe for the build
host as well as for the target (i.e. BBCLASSEXTEND = "native"); add a
--also-native command line option to "recipetool create" that enables
this and plumb it through from an identical option for "devtool add".
(We could conceivably do the same for nativesdk, but I felt it might be
confusing within the context of the extensible SDK, where nativesdk
isn't really relevant to the user.)
(From OE-Core rev: f3bea83db173cce921a9a30f04e88b7e3ed98854)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to run the clean for all recipes that are being reset before we
start deleting things from the workspace; if we don't, recipes providing
dependencies may be missing when we come to clean a recipe later (since
we don't and couldn't practically reset them in dependency order). This
also improves performance since we have the startup startup time for the
clean just once rather than for every recipe.
(From OE-Core rev: c10a2de75a99410eb5338dd6da0e0b0e32bae6f5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the recipe name ends with -native then we should inherit native;
likewise if it starts with nativesdk- then inherit nativesdk.
(Note that the recipe name must actually be specified by the user in
order to trigger this - we won't do it based on any name auto-detected
from e.g. the tarball name.)
Since we're doing this based on the name, "devtool add" will also gain
this functionality automatically.
(From OE-Core rev: a216fb1f5953327790dce3d2c1a9af616c0b410d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As a matter of general convention we expect recipe names to be lower
case; in fact some of the packaging backends insist upon it. Since in
this part of the code we're auto-determining the name, we should convert
the name to lowercase if it's not already so that we're following
convention and avoiding any validation issues later on.
(From OE-Core rev: 64986decbc11afa0d1e11251f5f7adcba1860d19)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For debugging purposes it's useful to be able to skip the preparation
step so you can inspect what the state of the build system is first.
(From OE-Core rev: 0bba4b5afd2ce2c3a79445eee886979a77f1a4d8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Running "raise" with no arguments here is invalid, we're not in
exception handling context. Rather than also adding code to catch the
exception I just moved the check out to the parent function from which
we can just exit.
(From OE-Core rev: 0164dc66467739b357ab22bf9b8c0845f3eff4a4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Clone the correct path - we need .git on the end
* Pull from the specified path instead of expecting a remote to be set
* up in the repo already (it isn't by default)
(From OE-Core rev: 1a60ee8bd21e156022c928f12bb296ab5caaa766)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We read the updateserver setting from the config file but we never
actually used that value - the code then went on to use only the value
supplied on the command line.
Fix courtesy of Dmitry Rozhkov <dmitry.rozhkov@intel.com>
(From OE-Core rev: 1c85237803038fba539d5b03bf4de39d99380684)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 3.14 and 3.19 kernel have been removed from oe-core, so we drop
our bbappends.
(From meta-yocto rev: e82a9e75b2d02387fc58232ee469ed0ae661b996)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a file is given using --sourceparams then wic directly use that file
instead of copying them to build folder. At time of assembling it os.rename
is called which renames all the files to name. In that process the original
file is renamed. When image recipe is rebuilt then wic complains about
missing file which was renamed in previous build.
[YOCTO #8854]
(From OE-Core rev: 33c52b1f2d39feb641465bf42e8b16d0ab22a316)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Copied layers with 'cp -a' instead of calling shutil.copytree as
copytree fails to copy broken symlinks.
More pythonic fix would be to use copytree with 'ignore' parameter,
but this could slow down copying complex directory structures.
[YOCTO #8825]
(From OE-Core rev: e5b841420b9fdd33829f7665a62cd06a3017f7e6)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having fetched the source and unpacked it to a temporary directory, we
then move part of it to the destination directory, or if the source is at
the top level we move the whole temporary directory, but in the latter
case we were later attempting to delete the temporary directory which no
longer existed. Clear out the variable so that doesn't happen.
(From OE-Core rev: 91714a52e91cddba5a16c73cf5765d1f47f7856c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* tar and binutils we can assume are there
* libsocket is only relevant on BSD systems, so we can ignore it.
* Detect more things implying gettext/intltool is needed
* Detect glib-2.0 requirement.
(From OE-Core rev: 2c4c78a6a9970533f3352f1067b2263f45098493)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Much of this was copy/pasted from the extract subcommand code; make it
specific to sync.
(From OE-Core rev: 08ca966dd48db881d8bfb7d7fa0aba49f1f7cffe)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We deliberately leave the source tree alone when resetting in case it
contains any work in progress belonging to the user; tell them that
we're doing this so they aren't surprised about it still existing later
on.
(From OE-Core rev: 1c616802ba2cfb37f8403f1dc6cf91ce3bd99ac2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a recipe in the workspace actually exists as a file within the
workspace (e.g. after doing "devtool add" or "devtool upgrade") then
show the path to the recipe file on the status line for the recipe.
(From OE-Core rev: 29833828a90c8433af3b231b50e99cd97edf19ff)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
